ZH
RU
ES

Aluminum Tolerance

Aluminum Tolerance, Total:166 items.

In the international standard classification, Aluminum Tolerance involves: Non-ferrous metals, Products of non-ferrous metals, Fasteners, Materials for aerospace construction, Construction industry, Aerospace fluid systems and components, Pipeline components and pipelines.


Society of Automotive Engineers (SAE), Aluminum Tolerance

SAE - SAE International, Aluminum Tolerance

Aerospace, Security and Defence Industries Association of Europe (ASD), Aluminum Tolerance

  • ASD-STAN PREN 2615-1986 Aerospace Series Wire to Close Tolerance in Aluminium and Aluminium Alloys 1,6 Less Than or Equal to D Less Than or Equal to 9,6 mm Dimensions (Issue P 1)
  • ASD-STAN PREN 2616-1986 Aerospace Series Wire for Rivets in Aluminium and Aluminium Alloys Large Tolerances D Less Than or Equal to 10 mm Dimensions (Issue P 1)
  • ASD-STAN PREN 2045-1976 Square Aluminium Alloy Bars - Drawn Dimensions - Tolerance h 11 Aerospace Series (Edition 1)

Association Francaise de Normalisation, Aluminum Tolerance

  • NF A50-761:1970 ALUMINIUM AND ALUMINIUM ALLOYS. COILS. TOLERANCES ON DIMENSIONS.
  • NF A50-442:1996 Aluminium and aluminium alloys. Foil. Part 3 : tolerances on dimensions.
  • NF L15-611:1973 Drawn tubes of circular section in aluminium alloys. Common tolerances.
  • NF E82-102:1982 ALUMINIUM AND ALUMINIUM ALLOY DROP FORGINS. DIMENSIONAL TOLERANCES.
  • NF L15-501:1968 General tolerances on aluminium alloy extruded sections.
  • NF A50-706:1987 Aluminium and aluminium alloys. Angles. Dimension and form tolerance.
  • NF A50-710:1981 Aluminium and aluminium alloys. Various extruded shapes. Tolerances and dimensions.
  • NF A50-708:1982 Aluminium and aluminium alloys. Extruded shape : tees. Tolerances and dimensions.
  • NF A50-709:1981 Aluminium and aluminium alloys. Extruded shapes ; channels. Tolerances and dimensions.
  • NF L15-113:1972 Aluminium alloy sheet. Tolerance on total surface thickness.
  • NF A50-705:1984 ALUMINIUM AND ALUMINIUM ALLOYS. RECTANGULAR SECTION EXTRUDED BARS. DIMENSIONAL TOLERANCES AND RECOMMENDED DIMENSIONS.
  • NF A50-440-3*NF EN 546-3:2007 Aluminium and aluminium alloys - Foil - Part 3 : tolerances on dimensions
  • NF EN 546-3:2007 Aluminium et alliages d'aluminium - Feuille mince - Partie 3 : tolérances sur dimensions
  • NF L15-555*NF EN 2066:2002 Aerospace series - Extruted section in aluminium alloys - General tolerances
  • NF EN 2066:2002 Série aérospatiale - Profilés filés en alliages d'aluminium - Tolérances générales
  • NF A50-707:1981 Aluminium and aluminium alloys. Extruded shapes : I beams. Tolerances and dimensions.
  • NF A50-802:1988 Aluminium and aluminium alloys. Large diameter welded tubes. Dimensions and tolerances.

European Association of Aerospace Industries, Aluminum Tolerance

  • AECMA PREN 6025-1997 Aerospace Series Plates in Aluminium Alloys Close Tolerance Flatness Thickness 6 mm Less than a Less than or Equal to 160 mm Dimensions Edition P 2
  • AECMA PREN 6025-1998 Aerospace Series Plates Aluminium Alloy 2024 Close-Tolerance Flatness Thickness 6 mm Less than a Less than or Equal to 55 mm Dimensions Edition P 3 [Superseded: ASD-STAN PREN 6025]
  • AECMA PREN 2615-1986 Aerospace Series Wire to Close Tolerance in Aluminium and Aluminium Alloys 1,6 Less Than or Equal to D Less Than or Equal to 9,6 mm Dimensions Issue P 1

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Aluminum Tolerance

  • PREN 2044-2000 Aerospace Series Round Bars@ Drawn@ in Aluminium and Aluminium Alloys Tolerance Class H 11 Diameter 4 mm Less Than or Equal to D Less Than or Equal to 63 mm Dimensions (Edition P 1; Supersedes Edition 1: December 1976)
  • PREN 2065-1978 Folded Profiles Aluminium Alloys General Tolerances Aerospace Series (Edition 1)
  • PREN 6025-1998 Aerospace Series Plates Aluminium Alloy 2024 Close-Tolerance Flatness Thickness 6 mm Less than a Less than or Equal to 55 mm Dimensions (Edition P 3)
  • PREN 6025-1997 Aerospace Series Plates in Aluminium Alloys Close Tolerance Flatness Thickness 6 mm Less than a Less than or Equal to 160 mm Dimensions (Edition P 2)
  • PREN 2066-1978 Extruded Sections in Aluminium and Aluminium Alloys General Tolerances Aerospace Series (Edition 1)
  • PREN 2065-1995 Aerospace Series Folded Profiles in Aluminium and Aluminium Alloys General Tolerances (Edition 2)

British Standards Institution (BSI), Aluminum Tolerance

  • BS EN 546-3:1997 Specification for aluminium and aluminium alloys - Foil - Tolerances on dimensions
  • BS EN 546-3:2007 Aluminium and aluminium alloys - Foil - Tolerances on dimensions
  • BS EN 1301-3:1997 Aluminium and aluminium alloys - Drawn wire - Tolerances on dimensions
  • BS EN 1301-3:2008 Aluminium and aluminium alloys - Drawn wire - Tolerances on dimensions
  • BS EN 586-3:2002 Aluminium and aluminium alloys - Forgings - Tolerances on dimensions and form
  • BS EN 603-3:2000 Aluminium and aluminium alloys - Wrought forging stock - Tolerances on dimensions and form
  • BS EN 586-3:2001 Aluminium and aluminium alloys. Forgings. Tolerances on dimensions and form
  • BS EN 546-3:2006 Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions
  • BS EN 2066:2002 Aerospace series - Extruded section in aluminium alloys - General tolerances
  • BS EN 604-2:1997 Aluminium and aluminium alloys - Cast forging stock - Tolerances on dimensions and form
  • BS EN 6025:2021 Aerospace series. Plates. Aluminium alloy 2024. Close tolerances flatness. Thickness. 6 mm = a = 55 mm. Dimensions

Aerospace Industries Association/ANSI Aerospace Standards, Aluminum Tolerance

  • AIA/NAS NAS 9313-1997 Rivet, Solid, Close Tolerance, 100 Degree, Flush Head, Aluminum Alloy, Titanium-Columbium Alloy FSC 5320
  • AIA/NAS NAS 9314-1997 Rivet, Solid, Close Tolerance, 100 Degrees, Flush, Reduced Shear Head, Aluminum Alloy, Titanium-Columbium Alloy FSC 5320
  • AIA/NAS NA 0036-1997 Bolt, Close Tolerance, Hexagon Head Alloy Steel 1100 MPa Metric Rev. 4
  • AIA/NAS NAS 56-1949 Close Tolerance Alloy Steel and Alum. Alloy 3/8-24 (Rev. 4) [Superseded By: DLA AN173 THRU AN186 REV 7 (1), DLA AN173 THRU AN186 REV 7, DLA AN173 THRU AN186 REV 6, DLA AN173 THRU AN186 REV 5 VALID NOTICE 1, DLA AN173 THRU AN186 REV 5]
  • AIA/NAS NAS 53-1949 Bolt - Close Tolerance Alloy Steel and Alum. Alloy
  • AIA/NAS NAS 54-1949 Bolt - Close Tolerance Alloy Steel and Alum. Alloy 1/4-28 (Rev. 4) [Superseded By: DLA AN173 THRU AN186 REV 7 (1), DLA AN173 THRU AN186 REV 7, DLA AN173 THRU AN186 REV 6, DLA AN173 THRU AN186 REV 5 VALID NOTICE 1, DLA AN173 THRU AN186 REV 5]
  • AIA/NAS NAS 55-1949 Bolt - Close Tolerance Alloy Steel and Alum. Alloy 5/16-24 (Rev. 4) [Superseded By: DLA AN173 THRU AN186 REV 7 (1), DLA AN173 THRU AN186 REV 7, DLA AN173 THRU AN186 REV 6, DLA AN173 THRU AN186 REV 5 VALID NOTICE 1, DLA AN173 THRU AN186 REV 5]
  • AIA/NAS NAS 58-1949 Bolt - Close Tolerance Alloy Steel and Alum. Alloy 1/2-20 (Rev. 4) [Superseded By: DLA AN173 THRU AN186 REV 7 (1), DLA AN173 THRU AN186 REV 7, DLA AN173 THRU AN186 REV 6, DLA AN173 THRU AN186 REV 5 VALID NOTICE 1, DLA AN173 THRU AN186 REV 5]
  • AIA/NAS NAS 60-1949 Bolt - Close Tolerance Alloy Steel and Alum. Alloy 5/8-18 (Rev. 4) [Superseded By: DLA AN173 THRU AN186 REV 7 (1), DLA AN173 THRU AN186 REV 7, DLA AN173 THRU AN186 REV 6, DLA AN173 THRU AN186 REV 5 VALID NOTICE 1, DLA AN173 THRU AN186 REV 5]
  • AIA/NAS NAS 64-1949 Bolt - Close Tolerance Alloy Steel and Alum. Alloy 7/8-14 (Rev. 4) [Superseded By: DLA AN173 THRU AN186 REV 7 (1), DLA AN173 THRU AN186 REV 7, DLA AN173 THRU AN186 REV 6, DLA AN173 THRU AN186 REV 5 VALID NOTICE 1, DLA AN173 THRU AN186 REV 5]
  • AIA/NAS NAS 66-1949 Bolt - Close Tolerance Alloy Steel and Alum. Alloy 1-14 (Rev. 4) [Superseded By: DLA AN173 THRU AN186 REV 7 (1), DLA AN173 THRU AN186 REV 7, DLA AN173 THRU AN186 REV 6, DLA AN173 THRU AN186 REV 5 VALID NOTICE 1, DLA AN173 THRU AN186 REV 5]
  • AIA/NAS NAS9313-2015 RIVET, SOLID, CLOSE TOLERANCE, 100° FLUSH HEAD, ALUMINUM ALLOY, TITANIUM-COLUMBIUM ALLOY (Rev 2)
  • AIA/NAS NAS 62-1949 Bolt - Close Tolerance Alloy Steel and Alum. Alloy 3/4-16 Superseded - June 1949 (Rev. 4) [Use: DLA AN173 THRU AN186 REV 7 (1), DLA AN173 THRU AN186 REV 7, DLA AN173 THRU AN186 REV 6, DLA AN173 THRU AN186 REV 5 VALID NOTICE 1, DLA AN173 THRU AN186

PL-PKN, Aluminum Tolerance

  • PN-EN 6025-2021-08 E Aerospace series -- Plates -- Aluminium alloy 2024 -- Close tolerance flatness -- Thickness -- 6 mm ≤ a ≤ 55 mm -- Dimensions

ES-UNE, Aluminum Tolerance

  • UNE-EN 2045:2001 Aerospace series- Square bars, drawn in aluminium alloys- Tolerance class h 11- Thickness 6 mm<a<50 mm- Dimensions. (Endorsed by AENOR in February of 2002.)
  • UNE-EN 2066:2001 Aerospace series- Extruded section in aluminium alloys- General tolerances. (Endorsed by AENOR in February of 2002.)
  • UNE-EN 6025:2021 Aerospace series - Plates - Aluminium alloy 2024 - Close tolerances flatness - Thickness - 6 mm < a = 55 mm - Dimensions

CZ-CSN, Aluminum Tolerance

  • CSN 42 7410-1964 Drawn aluminium and aluminium alloy wire, round, usual tolerances. Dimensions

European Committee for Standardization (CEN), Aluminum Tolerance

  • EN 6025:2021 Aerospace series - Plates - Aluminium alloy 2024 - Close tolerance flatness - Thickness - 6 mm ≤ a ≤ 55 mm - Dimensions
  • EN 546-3:2006 Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions
  • EN 546-3:1996 Aluminium and Aluminium Alloys - Foil - Part 3: Tolerances on Dimensions
  • prEN 2044-1977 Round aluminium alloy bars, drawn; dimensions; tolerance h 11; aerospace series
  • prEN 2045-1977 Square aluminium alloy bars, drawn; dimensions; tolerance h 11; aerospace series
  • EN 2066:2001 Aerospace series - Extruded section in aluminium alloys - General tolerances
  • prEN 2046-1977 Hexagonal aluminium alloy bars, drawn; dimensions; tolerance h 11; aerospace series
  • prEN 604-2-1991 Cast forging stock in aluminium and aluminium alloys; part 2: dimensional tolerances

VN-TCVN, Aluminum Tolerance

  • TCVN 5841-1994 Aluminium and aluminium alloys.Profiles.Tolerances on dimensions and forms
  • TCVN 5840-1994 Aluminium and aluminium alloys.Rectangular bars.Tolerances dimensions and forms

CH-SNV, Aluminum Tolerance

Danish Standards Foundation, Aluminum Tolerance

  • DS/EN 546-3:2007 Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions
  • DS/EN 6025:2021 Aerospace series – Plates – Aluminium alloy 2024 – Close tolerances flatness – Thickness – 6 mm ≤ a ≤ 55 mm – Dimensions
  • DS/EN 2066:2002 Aerospace series - Extruded section in aluminium alloys - General tolerances

Lithuanian Standards Office , Aluminum Tolerance

  • LST EN 546-3-2007 Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions
  • LST EN 2066-2002 Aerospace series - Extruded section in aluminium alloys - General tolerances
  • LST EN 6025-2021 Aerospace series - Plates - Aluminium alloy 2024 - Close tolerances flatness - Thickness - 6 mm < a ? 55 mm - Dimensions

AENOR, Aluminum Tolerance

  • UNE-EN 546-3:2008 Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions

German Institute for Standardization, Aluminum Tolerance

  • DIN EN 546-3:2007 Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions; English version of DIN EN 546-3:2007-03
  • DIN EN 546-3:2007-03 Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions; German version EN 546-3:2006
  • DIN EN 2066:2003 Aerospace series - Extruded section in aluminium alloys - General tolerances; German and English version EN 2066:2001
  • DIN EN 2066:2003-06 Aerospace series - Extruded section in aluminium alloys - General tolerances; German and English version EN 2066:2001
  • DIN 65207:1987-11 Aerospace; tolerances for wrougth aluminium alloy folded profiles (sections)

International Organization for Standardization (ISO), Aluminum Tolerance

  • ISO/TR 7735:1982 Wrought aluminium and aluminium alloys — Sheet — Tolerances on shape and dimensions
  • ISO 7271:2011 Aluminium and aluminium alloys - Foil and thin strip - Dimensional tolerances
  • ISO 7271:1982 Aluminium and aluminium alloys; Foil and thin strip; Dimensional tolerances

RO-ASRO, Aluminum Tolerance

  • STAS 10973/2-1977 ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED HOLLOW AND SOLID SECTIONS Tolerances

Aerospace Industries Association, Aluminum Tolerance

  • AIA NAS 9313-1997 Rivet, Solid, Close Tolerance, 100 Degree, Flush Head, Aluminum Alloy, Titanium-Columbium Alloy FSC 5320

AIA/NAS - Aerospace Industries Association of America Inc., Aluminum Tolerance

  • NAS9313-2015 RIVET@ SOLID@ CLOSE TOLERANCE@ 100° FLUSH HEAD@ ALUMINUM ALLOY@ TITANIUM-COLUMBIUM ALLOY (Rev 2)
  • NAS9313-2011 RIVET@ SOLID@ CLOSE TOLERANCE@ 100° FLUSH HEAD@ ALUMINUM ALLOY@ TITANIUM-COLUMBIUM ALLOY (Rev 1)

  Aluminum Dimensional Tolerances, Aluminum Forging Tolerances, Aluminum Forging Tolerances, Aluminum Tolerance, Cast aluminum alloy tolerances, Cast Aluminum Tolerances, Aluminum alloy tubing tolerances, Aluminum Profile Tolerance, Aluminum Tolerance, Aluminum Dimensional Tolerances, Aluminum billet tolerance, Dimensional Tolerances of Aluminum Alloy Die Casting, Aluminum Tube Tolerances, Aluminum Casting Tolerances, Aluminum plate tolerance, Cast Aluminum Tolerances, Wrought Aluminum Tolerances, Aluminum machining tolerances, Aluminum Alloy Die Forging Tolerances, Aluminum Alloy Casting Aluminum Alloy Casting Tolerances.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved