ZH
RU
ES

Spectrophotometric standard cadmium series

Spectrophotometric standard cadmium series, Total:500 items.

In the international standard classification, Spectrophotometric standard cadmium series involves: Air quality, Analytical chemistry, Optics and optical measurements, Nuclear energy engineering, Rubber, Ferrous metals, Products of the chemical industry, Non-ferrous metals, Paints and varnishes, Rubber and plastics products, Aerospace electric equipment and systems, On-board equipment and instruments, Water quality, Testing of metals, Fuels, Metalliferous minerals, Organic chemicals, Plastics, Non-destructive testing, Paint ingredients, Fibre optic communications, Pulps, Fruits. Vegetables, Insulating fluids, Cereals, pulses and derived products, Products of non-ferrous metals, Particle size analysis. Sieving, Lamps and related equipment, Fasteners for aerospace construction, Geology. Meteorology. Hydrology, Surface treatment and coating, Ceramics, Capacitors, Natural gas, Crude petroleum.


General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Spectrophotometric standard cadmium series

  • GB/T 11740-1989 Standard method for hygienic examination of cadmium in air of residential areas--Atomic absorption spectrophotometry
  • GB/T 12374-1990 Standard method for examination of nitrate in air of residential areas--Reduction of the cadmium column-spectrophotometry of N-(1-naphthyl)ethylene diamine hydrochloride
  • GB/T 11735-1989 Standard method for hygienic examination of beryllium in air of residential areas--Morin fluorescence spectrophotometric method
  • GB/T 11736-1989 Standard method for hygienic examination of chlorine in air of residential areas--Methyl orange spectrophotometric method
  • GB/T 11739-1989 Standard method for hygienic examination of lead in air of residential areas--Atomic absorption spectrophotometry
  • GB/T 11742-1989 Standard method for hygienic examination of hydrogen sulfide in air of residential areas--Methylene blue spectrophotometric method
  • GB/T 11732-1989 Standard method for hygienic examination of pyridine in air of residential areas--Cyanogen chloride-barbituric acid spectrophotometric method
  • GB/T 17098-1997 Standard method for hygienic examination of phenols in air of residential areas--4-Aminoantipyrine spectrophotometric method
  • GB/T 8912-1988 Hygienic determination method of arsenide in air of residential areas--Silver dithyldithiocarbamate spectrophotometric method
  • GB/T 8913-1988 Hygienic determination method of sulfur dioxide in air of residential areas--Tetrachloromercurate (TCM)-pararosaniline spectrophotometric method

中华人民共和国国家卫生和计划生育委员会, Spectrophotometric standard cadmium series

  • GB 11740-1989 Standard method for hygienic examination of cadmium in the atmosphere of residential areas Atomic absorption spectrophotometry
  • GB 12374-1990 Standard method for the examination of nitrate in the atmosphere of residential areas
  • GB 11735-1989 Standard method for hygienic examination of beryllium in the atmosphere of residential areas Morin fluorescence spectrophotometry
  • GB/T 16129-1995 Standard method for hygienic examination of formaldehyde in air of residential areas--Spectrophotometric method
  • GB 11736-1989 Standard method for hygienic examination of chlorine in the atmosphere of residential areas Methyl orange spectrophotometry
  • GB 11739-1989 Atmospheric absorption spectrophotometric standard method for hygienic examination of lead in the atmosphere of residential areas
  • GB 11742-1989 Standard method for hygienic examination of hydrogen sulfide in the atmosphere of residential areas methylene blue spectrophotometric method
  • GB 11732-1989 Standard method for hygienic examination of pyridine in the atmosphere of residential areas cyanogen chloride-barbituric acid spectrophotometric method
  • GB 8912-1988 Hygienic standard test method for arsenic in the atmosphere of residential areas silver diethylaminodithioformate spectrophotometric method
  • GB 8913-1988 Hygienic standard test method for sulfur dioxide in the atmosphere of residential areas

Professional Standard - Urban Construction, Spectrophotometric standard cadmium series

  • CJ 26.22-1991 Water quality inspection method of urban sewage standard Determination of cadmium dithizone spectrophotometric method
  • CJ 26.28-1991 Municipal sewage water quality inspection method standard Determination of total phosphorus spectrophotometric method
  • CJ 26.17-1991 Water quality examination methods for urban sewage Standard Determination of zinc dithizone spectrophotometric method
  • CJ 26.19-1991 Water quality inspection methods for municipal sewage Determination of standard lead dithizone spectrophotometric method
  • CJ 26.13-1991 Municipal sewage water quality test method Determination of standard aniline Azo spectrophotometric method
  • CJ 26.26-1991 Municipal sewage water quality inspection method standard Determination of nitrite nitrogen spectrophotometric method
  • CJ 26.21-1991 Water quality inspection method of urban sewage standard Determination of hexavalent chromium diphenylcarbazide spectrophotometric method
  • CJ 26.16-1991 Municipal sewage water quality inspection method Determination of standard copper diethyldithiocarbamate sodium spectrophotometric method
  • CJ 26.23-1991 Municipal sewage water quality inspection method standard Determination of total arsenic by silver diethyldithiocarbamate spectrophotometric method
  • CJ 26.8-1991 Water quality inspection methods for urban sewage Standard determination of volatile phenols Distilled 4-aminoantipyrine spectrophotometric method

Association Francaise de Normalisation, Spectrophotometric standard cadmium series

  • NF T01-035:1979 Molecular absorption spectrophotometry. Spectrophotometers and photometers. Record card. Standard layout.
  • NF T20-002:1966 Standard plan for methods of chemical analysis by flame emission spectrophotometry.
  • NF EN 3745-502:2006 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 502 : résistance à la traction sur faible longueur d'une fibre optique
  • NF EN 4641-106:2018 Série aérospatiale - Câbles, optiques, diamètre extérieur de la gaine optique 125 µm - Partie 106 : câble à structure semi-libre, fibre à gradient d'indice 62,5/125 µm, diamètre extérieur 0,9 mm - Norme de produit
  • NF L52-400-507*NF EN 3745-507:2003 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 507 : cut-through
  • NF EN 3745-601:2008 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 601 : densité de fumée
  • NF EN 3745-305:2003 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 305 : immunité de couplage à la lumière ambiante
  • NF L52-400-402*NF EN 3745-402:2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402 : temperature cycling
  • NF EN 3745-513:2006 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 513 : résistance à l'écrasement
  • NF EN 3745-410:2015 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 410 : durée de vie en température
  • NF EN 3745-505:2018 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 505 : tenue en traction
  • NF EN 3745-512:2006 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 512 : résistance à la flexion
  • NF EN 3745-402:2006 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 402 : cyclage en température
  • NF EN 4641-301:2022 Série aérospatiale - Câbles, optiques, diamètre extérieur de la gaine optique 125 µm - Partie 301 : câble à structure serrée, fibre à gradient d'indice 50/125 µm, diamètre extérieur 1,8 mm - Norme de produit
  • NF L54-002-145*NF EN 2591-617:2003 Aerospace series - Elements of electrical and optical connection - Test methods - Part 617 : optical elements - Temperature cycling
  • NF L52-400-303*NF EN 3745-303:2008 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 303 : bandwidth
  • NF EN 3745-705:2008 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 705 : mesure de contraste
  • NF L52-400-505*NF EN 3745-505:2018 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505 : cable tensile strength
  • NF EN 4641-200:2018 Série aérospatiale - Câbles, optiques, diamètre extérieur de la gaine optique 125 micromètres - Partie 200 : câble à structure semi-libre, fibre à gradient d'indice 9/125 micromètres, diamètre extérieur 0,9 mm - Norme de produit
  • NF EN 4641-104:2011 Série aérospatiale - Câble, optique, diamètre extérieur de la gaine optique 125 mm - Partie 104 : câble à structure semi libre, renforcée, double voie fibre à gradient d'indice 62,5/125 mm, diamètre extérieur 4,95 mm - Norme de produit
  • NF EN 4641-102:2009 Série aérospatiale - Câble, optique, diamètre extérieur de la gaine optique 125 µm - Partie 102 : câble à structure semi libre, fibre à gradient d'indice 62,5/125 µm, diamètre extérieur 1,8 mm - Norme de produit
  • NF L52-400-505:2008 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505 : cable tensile strength.
  • NF L52-400-601*NF EN 3745-601:2008 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601 : smoke density
  • NF EN 2591-607:2003 Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 607 : organes optiques - Immunité de couplage à la lumière ambiante
  • NF EN 2267-010:2018 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 oC et 260 oC - Partie 010 : famille DR, fil simple marquable au laser UV - Norme de produit
  • NF EN 4641-101:2015 Série aérospatiale - Câbles, optiques, diamètre extérieur de la gaine optique 125 mm - Partie 101 : câbles à structures serrés, fibre à gradient d'indice coeur 62,5 mm, diamètre extérieur 0,9 mm - Norme de produit
  • NF EN 3745-306:2006 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 306 : variation de l'atténuation en température
  • NF EN 4641-103:2011 Série aérospatiale - Câble, optique, diamètre extérieur de la gaine optique 125 mm - Partie 103 : câble à structure semi libre, renforcée, monovoie fibre à gradient d'indice 62,5/125 mm, diamètre extérieur 2,74 mm - Norme de produit
  • NF EN 4641-202:2018 Série aérospatiale - Câbles, optiques, diamètre extérieur de la gaine optique 125 µm - Partie 202 : câble à structure semi-libre, fibre à SM 9/125 µm, diamètre extérieur 2,74 mm - Norme de produit
  • NF EN 4641-201:2018 Série aérospatiale - Câbles, optiques, diamètre extérieur de la gaine optique 125 µm - Partie 201 : câble à structure semi-libre, fibre à SM 9/125 µm, diamètre extérieur 1,8 mm - Norme de produit
  • NF L52-275-010:2014 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 oC and 260 oC - Part 010 : DR family, single UV laser printable - Product standard
  • NF EN 2591-617:2003 Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 617 : organes optiques - Cycle de température
  • XP PR EN 2266-004:1995 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 degrés Celsius et 200 degrés Celsius - Partie 004 : marquables au laser CO2 - Norme de produit.
  • XP PR EN 2267-004:1995 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 degrés Celsius et 260 degrés Celsius - Partie 004 : marquables au laser CO2 - Norme de produit.
  • XP PR EN 2267-006:1995 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 degrés Celsius et 260 degrés Celsius - Partie 006 : marquables au laser YAG X3 - Norme de produit.
  • XP PR EN 2265-004:1995 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 degrés Celsius et 150 degrés Celsius - Partie 004 : marquables au laser CO2 - Norme de produit.
  • XP PR EN 2266-006:1995 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 degrés Celsius et 200 degrés Celsius - Partie 006 : marquables au laser YAG X3 - Norme de produit.
  • NF EN 2591-6401:2002 Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 6401 : organes optiques - Accélération constante
  • NF EN 4641-100:2015 Série aérospatiale - Câble, optique, diamètre extérieur de la gaine optique 125 micromètre - Partie 100 : câble à structure serrée fibre à gradient d'indice cœur 62,5/125 micromètre, diamètre extérieur 1,8 mm - Norme de produit
  • NF EN 2267-012:2015 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 oC et 260 oC - Partie 012 : famille DZ, fil simple marquable au laser UV pour emploi en basse pression - Norme de produit
  • NF EN 3745-703:2006 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 703 : tenue du marquage fabricant
  • NF EN ISO 5436-2:2012 Spécification géométrique des produits (GPS) - État de surface : méthode du profil - Étalons - Partie 2 : étalons logiciels
  • NF L24-521*NF EN 3227:2010 Aerospace series - Nuts, hexagonal, plain, normal height, normal across flats, in steel, cadmium plated, left hand thread - Classification : 1 100 MPa (at ambient temperature) /2 35oC
  • NF EN 2266-005:2006 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 oC et 200 oC - Partie 005 : marquables au laser UV - Norme de produit
  • NF EN 2267-005:2006 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 oC et 260 oC - Partie 005 : marquables au laser UV - Norme de produit
  • NF EN 2591-6305:2002 Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 6305 : organes optiques - Variations rapides de température
  • NF L52-400-703*NF EN 3745-703:2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 703 : durability of manufacturer's marking.
  • NF V03-734-2*NF EN ISO 6647-2:2020 Rice - Determination of amylose content - Part 2 : spectrophotometric routine method without defatting procedure and with calibration from rice standards
  • NF L54-113-003*NF EN 4701-003:2013 Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 oC, for EN 4531-101 contacts - Part 003 : module series 2 - Product standard
  • XP PR EN 2265-005:1995 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 degrés Celsius et 150 degrés Celsius - Partie 005 : marquables au laser UV - Norme de produit.
  • XP PR EN 2265-006:1995 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 degrés Celsius et 150 degrés Celsius - Partie 006 : marquables au laser YAG X3 - Norme de produit.
  • NF EN 3733-002:2008 Série aérospatiale - Connecteur optique circulaire monovoie, à accouplement par bague filetée, température d'utilisation 150 oC continu - Partie 002 : liste des normes de produit
  • NF EN 2346-005:2017 Série aérospatiale - Câbles électriques résistant au feu - Températures de fonctionnement comprises entre - 65 oC et 260 oC - Partie 005 : famille DW, fil simple marquable au laser UV et éléments assemblés - Version allégée - Norme de produit
  • NF EN 2346-004:2006 Série aérospatiale - Câbles électriques résistant au feu - Températures de fonctionnement comprises entre - 65 oC et 260 oC - Partie 004 : famille DN, fil simple marquable au laser UV et éléments assemblés - Version allégée - Norme de produit
  • NF L54-002-065*NF EN 2591-422:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 422 : locking wire hole strength
  • NF L52-275-005*NF EN 2267-005:2006 Aerospace series - Cables, electrical, for general purposes - Operating temperatures between - 55 oC and 260 oC - Part 005 : UV laser printable - Product standard
  • NF EN 3733-007:2008 Série aérospatiale - Connecteur optique circulaire monovoie, à accouplement par bague filetée, température d'utilisation 150 oC continu - Partie 007 : ferrule (contact optique) pour câble EN 4532 (fibre 200 mm/280 mm) - Norme de produit
  • NF L54-002-108*NF EN 2591-6305:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 6305 : optical elements - Rapid change of temperature
  • NF L24-522:2010 Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated - Classification : 900 MPa (at ambient temperature)/235 oC.
  • NF EN 2591-401:1993 Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie D1 : accélération constante

American Society for Testing and Materials (ASTM), Spectrophotometric standard cadmium series

  • ASTM C1307-21 Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry
  • ASTM C1307-15 Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry
  • ASTM D3677-10e1 Standard Test Methods for RubberIdentification by Infrared Spectrophotometry
  • ASTM C1307-14 Standard Test Method for Plutonium Assay by Plutonium 40;III41; Diode Array Spectrophotometry
  • ASTM E2808-21 Standard Guide for Microspectrophotometry in Forensic Paint Analysis
  • ASTM E2808-19e1 Standard Guide for Microspectrophotometry in Forensic Paint Analysis
  • ASTM E2808-19 Standard Guide for Microspectrophotometry in Forensic Paint Analysis
  • ASTM E2808-21a Standard Guide for Microspectrophotometry in Forensic Paint Analysis
  • ASTM D3677-10 Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM E1331-15(2019) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
  • ASTM E1247-12(2017) Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry
  • ASTM E1754-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM E388-72(1998) Standard Test Method for Spectral Bandwidth and Wavelength Accuracy of Fluorescence Spectrometers
  • ASTM E2808-11 Standard Guide for Microspectrophotometry and Color Measurement in Forensic Paint Analysis
  • ASTM E1247-92(2000) Standard Test Method for Identifying Fluorescence in Object-Color Specimens by Spectrophotometry
  • ASTM C1307-02 Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry
  • ASTM C1307-95 Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry
  • ASTM D3677-00(2004) Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM E2313-03 Standard Test Method for Aldehydes in Monoethylene Glycol (Spectrophotometric Method)
  • ASTM D3677-00 Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM E1615-22 Standard Test Method for Determination of Trace Quantities of Iron by Visible Spectrophotometry
  • ASTM C1307-02(2008) Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry
  • ASTM D3677-10(2019) Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM E388-04 Standard Test Method for Wavelength Accuracy of Spectral Bandwidth Fluorescence Spectrometers
  • ASTM D3335-85a(2005) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
  • ASTM D3335-85a(2009) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
  • ASTM E2867-14(2019) Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
  • ASTM D2124-99e1 Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • ASTM D2124-99(2004) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • ASTM D2124-99(2011) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • ASTM D4191-03 Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry
  • ASTM D4191-08 Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry
  • ASTM D4382-18 Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace
  • ASTM E1348-90(1996) Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
  • ASTM E1348-15e1 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
  • ASTM C760-90(2020) Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys
  • ASTM D3624-85a(2005) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
  • ASTM D3718-85a(2005) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
  • ASTM D3717-85a(2005) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
  • ASTM D3624-85a(2010) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
  • ASTM D3717-85a(2010) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
  • ASTM D3718-85a(2010) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
  • ASTM E578-83(1998) Standard Test Method for Linearity of Fluorescence Measuring Systems
  • ASTM E578-07(2021) Standard Test Method for Linearity of Fluorescence Measuring Systems
  • ASTM E1247-03 Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry
  • ASTM E1247-12 Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry
  • ASTM D5059-98 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
  • ASTM D5059-21 Standard Test Methods for Lead and Manganese in Gasoline by X-Ray Fluorescence Spectroscopy
  • ASTM D5059-98(2003)e1 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
  • ASTM D4192-08 Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry
  • ASTM D4192-03 Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry
  • ASTM E2313-20 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)
  • ASTM E1070-17a Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry
  • ASTM E1070-17 Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry
  • ASTM D5059-07 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
  • ASTM E1349-06(2013) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45deg;:0deg; or 0deg;:45deg;) Geometry
  • ASTM D1685-00 Standard Test Method for Traces of Thiophene in Benzene by Spectrophotometry
  • ASTM D1685-05 Standard Test Method for Traces of Thiophene in Benzene by Spectrophotometry
  • ASTM D3124-98(2003) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D3124-98 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D3124-98(2019) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM E1331-04 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
  • ASTM E1331-09 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
  • ASTM E387-84(1995)e1 Standard Test Method for Estimating Stray Radiant Power Ratio of Spectrophotometers by the Opaque Filter Method
  • ASTM D4046-91(2000)e1 Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry
  • ASTM D4046-11 Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry
  • ASTM E1754-95(2001)e1 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM E1754-95 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM D4382-02(2007)e1 Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace
  • ASTM D4382-02 Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace
  • ASTM D4382-95 Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace
  • ASTM D4046-91(2005) Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry
  • ASTM E1070-11 Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry
  • ASTM E2313-15 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)
  • ASTM D4046-14 Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry
  • ASTM D4382-12 Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace
  • ASTM E578-07 Standard Test Method for Linearity of Fluorescence Measuring Systems
  • ASTM E578-01 Standard Test Method for Linearity of Fluorescence Measuring Systems
  • ASTM E578-07(2013) Standard Test Method for Linearity of Fluorescence Measuring Systems
  • ASTM D5153-22 Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption Spectrophotometry
  • ASTM E2867-13 Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
  • ASTM E2867-14(2023) Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
  • ASTM G138-03 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
  • ASTM G138-06 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
  • ASTM E60-11(2022)e1 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry
  • ASTM E1331-15 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
  • ASTM C760-90 Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys
  • ASTM E463-14a Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrophotometry
  • ASTM D3335-85a(1999) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
  • ASTM D3335-85a(2020) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
  • ASTM C1510-01 Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
  • ASTM D3831-98 Standard Test Method for Manganese In Gasoline By Atomic Absorption Spectroscopy
  • ASTM D3831-01 Standard Test Method for Manganese In Gasoline By Atomic Absorption Spectroscopy
  • ASTM D3831-01(2006) Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
  • ASTM E1348-22 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
  • ASTM C1510-01(2020) Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
  • ASTM D3831-12 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
  • ASTM D1840-22 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM C1510-01(2016) Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
  • ASTM E885-88(1996) Standard Test Methods for Analyses of Metals in Refuse-Derived Fuel by Atomic Absorption Spectroscopy
  • ASTM E885-88(2004) Standard Test Methods for Analyses of Metals in Refuse-Derived Fuel by Atomic Absorption Spectroscopy
  • ASTM D4085-93(2021) Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
  • ASTM D4085-93(2008) Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
  • ASTM E116-97 Standard Practice for Photographic Photometry in Spectrochemical Analysis (Withdrawn 2002)
  • ASTM D4085-93(2013) Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
  • ASTM E387-04(2022) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
  • ASTM E387-04(2014) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
  • ASTM C760-90(2015) Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys
  • ASTM D6248-21 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM E1348-15 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
  • ASTM E507-03 Standard Test Method for Aluminum in Iron Ores by Atomic Absorption Spectrometry
  • ASTM C1510-01(2007) Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
  • ASTM E1786-96 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1786-02 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1786-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1754-17 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM E1754-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM D3635-13(2021) Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
  • ASTM E387-04 Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
  • ASTM E387-04(2009) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
  • ASTM D4691-02(2007) Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry
  • ASTM D4691-02 Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry
  • ASTM D4691-96 Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry
  • ASTM D4691-11 Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry
  • ASTM E60-98(2004) Standard Practice for Analysis of Metals, Ores, and Related Materials by Molecular Absorption Spectrometry
  • ASTM E60-98 Standard Practice for Analysis of Metals, Ores, and Related Materials by Molecular Absorption Spectrometry
  • ASTM E60-11 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry
  • ASTM D1003-00 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
  • ASTM D1003-13 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
  • ASTM E2313-21a Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)
  • ASTM E1348-90 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
  • ASTM D1840-03 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM D6248-98 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D1840-01 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM D1840-96 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM D1840-02 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM E2313-21 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)
  • ASTM C1510-01(2012) Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
  • ASTM E2193-23 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
  • ASTM D6248-98(2004) Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D1840-07 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM D1840-07(2013) Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM E2867-14 Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
  • ASTM E508-03 Standard Test Method for Calcium and Magnesium in Iron Ores by Atomic Absorption Spectrometry
  • ASTM E1786-17 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E463-21 Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrophotometry
  • ASTM E1786-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM D4046-14(2019) Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry (Withdrawn 2019)
  • ASTM D1840-07(2017) Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM D5670-95(2000)e1 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • ASTM D5670-95(2009) Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • ASTM E1348-11 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
  • ASTM D5670-95(2023) Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • ASTM E1938-13(2018) Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry
  • ASTM D3635-13 Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
  • ASTM E1458-12(2022) Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
  • ASTM D7399-18 Standard Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low Density Polyethylene Mixtures Using Infrared Spectrophotometry
  • ASTM D5670-95(2019) Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • ASTM E62-89(2004) Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
  • ASTM D4185-96(2001)e1 Standard Practice for Measurement of Metals in Workplace Atmosphere by Flame Atomic Absorption Spectrophotometry
  • ASTM D4185-96 Standard Practice for Measurement of Metals in Workplace Atmosphere by Flame Atomic Absorption Spectrophotometry
  • ASTM D3635-01(2005) Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
  • ASTM D3635-01 Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
  • ASTM D3635-90(1998) Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
  • ASTM E1349-90(1998) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry
  • ASTM D6645-01 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
  • ASTM D3133-96 Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
  • ASTM E1349-06(2022) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry
  • ASTM E2313-22 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)
  • ASTM D6645-18 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
  • ASTM D4185-23 Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
  • ASTM E1349-06(2018) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry
  • ASTM D5902-05(2015) Standard Test Method for Rubber&x2014;Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
  • ASTM D5184-01 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
  • ASTM D5184-01(2006) Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
  • ASTM D4834-88(1998) Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
  • ASTM E3193-20 Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS)
  • ASTM E3193-19 Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS)
  • ASTM E1938-13 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry
  • ASTM D5086-20 Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
  • ASTM D3124-98(2011) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM C715-90(1996) Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
  • ASTM D5670-95(2004)e1 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • ASTM D4590-09 Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (alpha-Methylstyrene) by Spectrophotometry
  • ASTM E1917-13(2018) Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Spectrophotometry
  • ASTM D6248-98(2012)e1 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM E1917-13 Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Spectrophotometry
  • ASTM D4590-13 Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (alpha;ndash;Methylstyrene) by Spectrophotometry
  • ASTM E314-16 Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate Potentiometry and Periodate Spectrophotometry Techniques
  • ASTM C715-90(2006) Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
  • ASTM C1182-91(2001) Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photo sedimentation
  • ASTM C715-90(2011)e1 Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
  • ASTM D4464-00 Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering
  • ASTM D4464-00(2005) Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering
  • ASTM E3340-22 Standard Guide for Development of Laser Diffraction Particle Size Analysis Methods for Powder Materials
  • ASTM D6122-19b Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
  • ASTM D6122-18 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
  • ASTM D6122-19 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
  • ASTM D6122-19a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
  • ASTM D3919-04 Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
  • ASTM D3919-99 Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
  • ASTM D4190-08 Standard Test Method for Elements in Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy
  • ASTM E1331-96(2003) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
  • ASTM D3605-00 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
  • ASTM E878-12 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
  • ASTM D7904-21 Standard Test Method for Determination of Water Vapor (Moisture Concentration) in Natural Gas by Tunable Diode Laser Spectroscopy (TDLAS)
  • ASTM D3561-16(2021)e1 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
  • ASTM D7399-08 Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)
  • ASTM D4464-10 Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering
  • ASTM F2617-08e1 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
  • ASTM F2617-15(2023) Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
  • ASTM E3064-16 Standard Test Method for Evaluating the Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose
  • ASTM D4190-99 Standard Test Method for Elements in Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy
  • ASTM E2490-09 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
  • ASTM E2490-09(2015) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
  • ASTM D4590-95A Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (alpha-Methylstyrene) by Spectrophotometry
  • ASTM D4590-00 Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (alpha-Methylstyrene) by Spectrophotometry
  • ASTM E878-20 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
  • ASTM D5670-95(2014) Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • ASTM C715-90(2000) Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
  • ASTM C1070-01(2014) Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
  • ASTM C715-90(2016) Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
  • ASTM D5863-00 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
  • ASTM D5863-00a Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
  • ASTM D5863-00a(2005) Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
  • ASTM D5863-00a(2011) Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
  • ASTM E314-10(2015)e1 Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate (Potentiometric) and Periodate (Spectrophotometric) Techniques
  • ASTM C1865-18 Standard Test Method for The Determination of Carbon and Sulfur Content in Plutonium Oxide Powder by the Direct Combustion-Infrared Spectrophotometer
  • ASTM D5576-00(2021)e1 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
  • ASTM D4185-06(2011) Standard Practice for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
  • ASTM D7904-15 Standard Test Method for Determination of Water Vapor (Moisture Concentration) in Natural Gas by Tunable Diode Laser Spectroscopy (TDLAS)
  • ASTM D7614-12 Standard Test Method for Determination of Total Suspended Particulate (TSP) Hexavalent Chromium in Ambient Air Analyzed by Ion Chromatography (IC) and Spectrophotometric Measurements
  • ASTM D4464-15(2020) Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering
  • ASTM D4464-15 Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering

Professional Standard - Commodity Inspection, Spectrophotometric standard cadmium series

  • SN/T 2931-2011 Standard test method for naphthalenes in aviation turbine fuels by ultraviolet spectrophotometry

Korean Agency for Technology and Standards (KATS), Spectrophotometric standard cadmium series

  • KS D ISO 9441-2002(2022) Steel－Determination of niobium content－PAR spectrophotometric method
  • KS M 5985-2008(2018) Standard test method for low concentrations of lead, cadmium and cobalt in paint by atomic absorption spectroscopy
  • KS D 2043-2009 Standard test methods for chemical analysis of magnesium and magnesium alloys-Dithizone photometric method
  • KS D 2043-2004 Standard test methods for chemical analysis of magnesium and magnesium alloys－Dithizone photometric method

German Institute for Standardization, Spectrophotometric standard cadmium series

  • DIN EN 3745-305:2003-05 Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 305: Immunity to ambient light coupling; German and English version EN 3745-305:2002
  • DIN EN 3745-502:2006-12 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 502: Tensile strength for short length of optical fibres; German and English version EN 3745-502:2005 / Note: Applies in conjunction with DIN EN 2591-100 (2006-08).
  • DIN EN 3745-505:2009 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength; German and English version EN 3745-505:2007
  • DIN EN 3745-601:2009 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density; German and English version EN 3745-601:2007
  • DIN 5033-9:2018-04 Colorimetry - Part 9: Reflectance standard for calibration in colorimetry and photometry
  • DIN EN 2591-6401:2003 Aerospace series - Elements of electrical and optical connection; Test methods - Part 6401: Optical elements; Acceleration steady state; German and English version EN 2591-6401:2001
  • DIN EN 3745-505:2018 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength; German and English version EN 3745-505:2018
  • DIN EN 2591-6305:2003 Aerospace series - Elements of electrical and optical connection; Test methods - Part 6305: Optical elements; Rapid change of temperature; German and English version EN 2591-6305:2001
  • DIN EN 3745-306:2006-12 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling; German and English version EN 3745-306:2005 / Note: To be replaced by DIN EN 3745-306 (2022-07).
  • DIN EN 3745-703:2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 703: Durability of manufacturer's marking; German and English version EN 3745-703:2005
  • DIN EN 2591-617:2002-12 Aerospace series - Elements of electrical and optical connection; Test methods - Part 617: Optical elements; Temperature cycling; German version EN 2591-617:2002 / Note: Applies in conjunction with DIN EN 2591-100 (2006-08).
  • DIN EN 2591-305:1997 Aerospace series - Elements of electrical and optical connection; test methods - Part 305: Rapid change of temperature; German version EN 2591-305:1997
  • DIN EN 2267-010:2019 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 ？C and 260 ？C - Part 010: DR family, single UV laser printable - Product standard; German and English version EN 2267-010:2018
  • DIN EN 4641-102:2023-06 Aerospace series - Cables, optical 125 ?m outside diameter cladding - Part 102: Semi-loose 62,5/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard; English version prEN 4641-102:2023 / Note: Date of issue 2023-05-12*Intended as replace...
  • DIN EN 4641-102:2009-10 Aerospace series - Cables, optical 125 µm outside diameter cladding - Part 102: Semi-loose 62,5/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard; German and English version EN 4641-102:2009
  • DIN EN 2591-422:2003 Aerospace series - Elements of electrical and optical connection; Test methods - Part 422: Locking wire hole strength; German and English version EN 2591-422:2002
  • DIN EN 2591-216:1997 Aerospace series - Elements of electrical and optical connection; test methods - Part 216: Engagement depth of contacts; German version EN 2591-216:1997
  • DIN EN 2267-010:2019-02 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard; German and English version EN 2267-010:2018
  • DIN EN 4701-003:2013-08 Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4531-101 contacts - Part 003: Module series 2 - Product standard; German and English version EN 4701-003:2013
  • DIN EN 4641-201:2019-03 Aerospace series - Cables, optical, 125 µm diameter cladding - Part 201: Semi-loose structure 9/125 µm SM fibre nominal 1,8 mm outside diameter - Product standard; German and English version EN 4641-201:2018
  • DIN EN 4641-106:2019-03 Aerospace series - Cables, optical, 125 µm diameter cladding - Part 106: Semi-loose structure 62,5/125 µm GI fibre nominal 0,9 mm outside diameter - Product standard; German and English version EN 4641-106:2018
  • DIN EN 2591-615:2002-10 Aerospace series - Elements of electrical and optical connection; Test methods - Part 615: Optical elements; Connection integrity at temperature; German and English version EN 2591-615:2001 / Note: Applies in conjunction with DIN EN 2591-100 (2006-08).
  • DIN EN 4869-001:2023-05 Aerospace series - Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities - Part 001: Technical specification; English version prEN 4869-001:2023 / Note: Date of issue 2023-04-21
  • DIN EN 4641-101:2015-06 Aerospace series - Cables, optical, 125 µm diameter cladding - Part 101 : Tight structure 62,5 µm core GI fibre 0,9 mm outside diameter - Product standard; German and English version EN 4641-101:2015
  • DIN EN 3745-601:2009-05 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density; German and English version EN 3745-601:2007 / Note: Applies in conjunction with DIN EN 3745-100 (2009-07).
  • DIN EN 3733-002:2008-12 Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 002: List of product standards; German and English version EN 3733-002:2008

ES-UNE, Spectrophotometric standard cadmium series

  • UNE-EN 3745-502:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 502: Tensile stength for short length of optical fibres (Endorsed by AENOR in March of 2006.)
  • UNE-EN 3745-402:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling (Endorsed by AENOR in March of 2006.)
  • UNE-EN 3745-505:2018 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength (Endorsed by Asociación Española de Normalización in September of 2018.)
  • UNE-EN 2591-617:2002 Aerospace series. Elements of electrical and optical connection. Test methods. Part 617: Optical elements. Temperature cycling (Endorsed by AENOR in August of 2002.)
  • UNE-EN 2591-6401:2001 Aerospace series. Elements of electrical and optical connection. Test methods. Part 6401: Optical elements. Aceleration steady state (Endorsed by AENOR in February of 2002.)
  • UNE-EN 2591-6305:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 6305: Optical elements - Rapid change of temperature. (Endorsed by AENOR in April of 2002.)
  • UNE-EN 3745-703:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 703: Durability of manufacturer's marking (Endorsed by AENOR in March of 2006.)
  • UNE-EN 2267-010:2018 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard (Endorsed by Asociación Española de Normalización in February of 2019.)
  • UNE-EN 2591-6301:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 6301: Optical elements - Endurance at temperature. (Endorsed by AENOR in April of 2002.)
  • UNE-EN 4641-102:2009 Aerospace series - Cables, optical 125 µm outside diameter cladding - Part 102: Semi-loose 62,5/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard (Endorsed by AENOR in March of 2009.)
  • UNE-EN 4641-301:2022 Aerospace series - Cables, optical 125 µm diameter cladding - Part 301: Tight structure 50/125 µm GI, fibre nominal 1,8 mm, outside diameter - Product standard
  • UNE-EN 4701-003:2013 Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4531-101 contacts - Part 003: Module series 2 - Product standard (Endorsed by AENOR in July of 2013.)
  • UNE-EN 4641-201:2018 Aerospace series - Cables, optical, 125 µm diameter cladding - Part 201: Semi-loose structure 9/125 µm SM fibre nominal 1,8 mm outside diameter - Product standard (Endorsed by Asociación Española de Normalización in January of 2019.)
  • UNE-EN 4641-200:2018 Aerospace series - Cables, optical, 125 µm diameter cladding - Part 200: Semi-loose structure 9/125 µm GI fibre nominal 0,9 mm outside diameter - Product standard (Endorsed by Asociación Española de Normalización in December of 2018.)
  • UNE-EN 4641-106:2018 Aerospace series - Cables, optical, 125 µm diameter cladding - Part 106: Semi-loose structure 62,5/125 µm GI fibre nominal 0,9 mm outside diameter - Product standard (Endorsed by Asociación Española de Normalización in January of 2019.)
  • UNE-EN 2591-615:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 615: Optical elements - Connection integrity at temperature. (Endorsed by AENOR in April of 2002.)
  • UNE-EN 3745-306:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling (Endorsed by AENOR in March of 2006.)
  • UNE-EN 4641-101:2015 Aerospace series - Cables, optical 125 µm diameter cladding - Part 101: Tight structure 62,5 µm core GI fibre 0,9 mm outside diameter - Product standard (Endorsed by AENOR in May of 2015.)
  • UNE-EN 3745-601:2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density (Endorsed by AENOR in November of 2007.)
  • UNE-EN 3733-002:2008 Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 002: List of product standards (Endorsed by AENOR in May of 2008.)

Danish Standards Foundation, Spectrophotometric standard cadmium series

  • DS/EN 3745-505:2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength
  • DS/EN 3745-601:2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density
  • DS/EN 3745-305:2002 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 305: Immunity to ambient light coupling
  • DS/EN 3745-502:2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 502: Tensile stength for short length of optical fibres
  • DS/EN 3745-402:2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling
  • DS/EN 3745-705:2008 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 705: Contrast measurement
  • DS/EN 2591-607:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 607: Optical elements - Immunity to ambient light coupling
  • DS/EN 2591-617:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 617: Optical elements - Temperature cycling
  • DS/EN 2859:2006 Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series – Classification: 1 100 MPa (at ambient temperature) / 235 °C
  • DS/EN 2591-6301:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 6301: Optical elements - Endurance at temperature
  • DS/EN 2591-6401:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 6401: Optical elements - Acceleration steady state
  • DS/EN 3745-306:2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling
  • DS/EN 2591-6305:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 6305: Optical elements - Rapid change of temperature
  • DS/EN 3745-703:2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 703: Durability of manufacturer's marking
  • DS/EN 2591-420:2006 Aerospace series – Elements of electrical and optical connection – Test methods – Part 420: Mechanical strength of rear accessories
  • DS/EN 2591-422:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 422: Locking wire hole strength
  • DS/EN 2267-010:2006 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard
  • DS/EN 4701-003:2013 Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4531-101 contacts - Part 003: Module series 2 - Product standard
  • DS/EN 4641-301:2011 Aerospace series - Cables, optical 125 μm diameter cladding - Part 301: Tight structure 50/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard
  • DS/EN 2591-615:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 615: Optical elements - Connection integrity at temperature

Lithuanian Standards Office , Spectrophotometric standard cadmium series

  • LST EN 3745-505-2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength
  • LST EN 3745-601-2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density
  • LST EN 3745-305-2003 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 305: Immunity to ambient light coupling
  • LST EN 3745-502-2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 502: Tensile stength for short length of optical fibres
  • LST EN 3745-402-2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling
  • LST EN 3745-705-2008 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 705: Contrast measurement
  • LST EN 2591-607-2003 Aerospace series - Elements of electrical and optical connection - Test methods - Part 607: Optical elements - Immunity to ambient light coupling
  • LST EN 2591-617-2003 Aerospace series - Elements of electrical and optical connection - Test methods - Part 617: Optical elements - Temperature cycling
  • LST EN 2859-2006 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series - Classification: 1 100 MPa (at ambient temperature) / 235 °C
  • LST EN 2591-6301-2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 6301: Optical elements - Endurance at temperature
  • LST EN 2591-6401-2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 6401: Optical elements - Acceleration steady state
  • LST EN 3745-306-2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling
  • LST EN 2591-6305-2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 6305: Optical elements - Rapid change of temperature
  • LST EN 3745-703-2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 703: Durability of manufacturer's marking
  • LST EN 2591-422-2003 Aerospace series - Elements of electrical and optical connection - Test methods - Part 422: Locking wire hole strength
  • LST EN 2267-010-2006 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard
  • LST EN 4641-102-2009 Aerospace series - Cables, optical 125 ?m outside diameter cladding - Part 102: Semi-loose 62,5/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard
  • LST EN 4641-301-2011 Aerospace series - Cables, optical 125 ?m diameter cladding - Part 301: Tight structure 50/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard
  • LST EN 2591-615-2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 615: Optical elements - Connection integrity at temperature
  • LST EN ISO 6647-2:2020 Rice - Determination of amylose content - Part 2: Spectrophotometric routine method without defatting procedure and with calibration from rice standards (ISO 6647-2:2020)

Indonesia Standards, Spectrophotometric standard cadmium series

  • SNI 8069-2014 Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy

British Standards Institution (BSI), Spectrophotometric standard cadmium series

  • BS EN 3745-505:2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength
  • BS EN 3745-505:2018 Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Cable tensile strength
  • BS EN 3745-502:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 502: Tensile strength for short length of optical fibres
  • BS EN 3745-601:2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density
  • BS EN 3745-703:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 703: Durability of manufacturer's marking
  • BS EN 4701-003:2013 Aerospace series. Connectors, optical, rectangular, modular,operating temperature 125°C, for EN 4531-101 contacts. Module series 2. Product standard
  • BS EN 2266-005:2006 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - UV laser printable - Product standard
  • BS EN ISO 6647-2:2020 Rice. Determination of amylose content - Spectrophotometric routine method without defatting procedure and with calibration from rice standards

未注明发布机构, Spectrophotometric standard cadmium series

  • BS EN 3745-705:2007(2008) Aerospace series — Fibres and cables, optical, aircraft use — Test methods — Part 705 : Contrast measurement
  • BS EN 3745-306:2005 AEROSPACE SERIES Fibres and cables, optical, aircraft use — Test methods — Part 306 : Variation of attenuation during temperature cycling
  • BS EN 3745-601:2007(2008) Aerospace series — Fibres and cables, optical, aircraft use — Test methods — Part 601 : Smoke density

Standard Association of Australia （SAA）, Spectrophotometric standard cadmium series

  • AS ISO 15472:2006 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales

European Association of Aerospace Industries, Spectrophotometric standard cadmium series

  • AECMA PREN 3745-502-1998 Aerospace Series Fibres and Cables, Optical, Aircraft Use Test Methods Part 502: Tensile Strength for Short Length of Optical Fibres Edition P 1
  • AECMA PREN 2591-FC1-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part FC1 - Optical Elements Endurance at Temperature Edition P 1
  • AECMA PREN 2591-FC5-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part FC5 - Optical Elements Rapid Change of Temperature Edition P 1
  • AECMA PREN 2591-617-1997 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 617: Optical Elements Temperature Cycling Edition P 1
  • AECMA PREN 2591-FD1-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part FD1 - Optical Elements Acceleration Steady State Edition P 1
  • AECMA PREN 3745-601-2006 Aerospace series Fibres and cables, optical, aircraft use Test methods Part 601: Smoke density Edition P 1
  • AECMA PREN 3745-311-1994 Aerospace Series Fibres and Cables, Optical, Aircraft Use, Test Methods Part 311: Bending Test
  • AECMA PREN 3745-402-1997 Aerospace Series Fibres and Cables, Optical, Aircraft Use Test Methods Part 402: Temperature Cycling Edition P 1
  • AECMA PREN 3745-505-2006 Aerospace series Fibres and cables, optical, aircraft use Test methods Part 505: Cable tensile strength Edition P 1
  • AECMA PREN 2591-FD6-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part FD6 - Optical Elements Mechanical Endurance Edition P 1
  • AECMA PREN 2591-C1-1991 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part C1 - Endurance at Temperature Edition 1
  • AECMA PREN 2591-C5-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part C5 - Rapid Change of Temperature Issue P 1
  • AECMA PREN 2591-F15-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part F15 - Optical Elements Connection Integrity at Temperature Edition P 1
  • AECMA PREN 2591-FD14-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part FD14 - Optical Elements Unmating of Lanyard Release Optical Connection Elements Edition P 1
  • AECMA PREN 2591-D1-1991 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part D1 - Acceleration, Steady State Edition 1
  • AECMA PREN 3733-007-2001 Aerospace Series Connector, Optical, Circular, Single Channel, Coupled by Self-Locking Ring, Operating Temperatures up to 150 Degrees Celsius Continuous Part 007: Ferrule (Optical Contact) for EN 4532 (200/280um Fibre) - Product Standard Edition 2E
  • AECMA PREN 3733-007-2005 Aerospace Series Connector, Optical, Circular, Single Channel, Coupled by Self-Locking Ring, Operating Temperature up to 150 Degrees Celsius Continuous Part 007: Ferrule (Optical Contact) for EN 4532 (200/280um Fibre) - Product Standard Edition P 1
  • AECMA PREN 4529-002-2001 Aerospace Series Elements of Electrical and Optical Connection Sealing Plugs Part 002: Index of Product Standards Edition P 1
  • AECMA PREN 4529-003-2001 Aerospace Series Elements of Electrical and Optical Connection Sealing Plugs Part 003: Class T - Product Standard Edition P 1
  • AECMA PREN 3745-306-1998 Aerospace Series Fibres and Cables, Optical Aircraft Use Test Methods Part 306: Variation of Attenuation During Temperature Cycling
  • AECMA PREN 4531-101-2005 Aerospace series Connectors, optical, circular, single and multipin, coupled by threaded ring Flush contacts Part 101: Optical contact for EN C210cable-55 degrees celsius to 125 degrees celsius Product Standard Editon P 1
  • AECMA PREN 3745-703-1997 Aerospace Series Fibres and Cables, Optical, Aircraft Use Test Methods Part 703 - Durability of Manufacturer's Marking Edition P1
  • AECMA PREN 3745-703-2000 Aerospace Series Fibres and Cables, Optical, Aircraft Use Test Methods Part 703: Durability of Manufacturer's Marking Edition P 1
  • AECMA PREN 2591-D17-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part D17 - Tensile Strength (Crimped Connection) Issue P 1

European Committee for Standardization (CEN), Spectrophotometric standard cadmium series

  • EN 3745-502:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 502: Tensile stength for short length of optical fibres
  • EN 4701-003:2013 Aerospace series - Connectors@ optical@ rectangular@ modular@ operating temperature 125 �� for EN 4531-101 contacts - Part 003: Module series 2 - Product standard
  • EN 2591-6305:2001 Aerospace series - Elements of electrical and optical connection; Test methods - Part 6305: Optical elements; Rapid change of temperature
  • EN 2591-617:2002 Aerospace series - Elements of electrical and optical connection; Test methods - Part 617: Optical elements; Temperature cycling
  • EN 3745-703:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 703: Durability of manufacturer's marking
  • EN 2591-305:1997 Aerospace Series - Elements of Electrical and Optical Connection - Test Methods - Part 305: Rapid Change of Temperature
  • EN 3228:2010 Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature) / 235 °C
  • EN 2266-005:2005 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 005: UV laser printable - Product standard
  • EN 2267-005:2006 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 C and 260 C - Part 005: UV laser printable - Product standard
  • EN 4641-102:2009 Aerospace series - Cables, optical 125 ?m outside diameter cladding - Part 102: Semi-loose 62,5/125 ?m GI fibre nominal 1,8 mm outside diameter - Product standard
  • EN 2591-301:1996 Aerospace series - Elements of electrical and optical connection - Test methods - Part 301: Endurance at temperature
  • EN 2591-216:1997 Aerospace series - Elements of electrical and optical connection - Test methods - Part 216: Engagement depth of contacts
  • EN 2591-416:2001 Aerospace series - Elements of electrical and optical connection; Test methods - Part 416: Contact bending strength
  • EN 2591-B7:1993 Aerospace Series- Elements of Electrical and Optical Connection - Test Methods - Part B7: Voltage Proof Test
  • EN 3745-601:2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density

Aerospace, Security and Defence Industries Association of Europe (ASD), Spectrophotometric standard cadmium series

  • ASD-STAN PREN 3745-601-2006 Aerospace series Fibres and cables, optical, aircraft use Test methods Part 601: Smoke density (Edition P 1)
  • ASD-STAN PREN 3745-502-1998 Aerospace Series Fibres and Cables, Optical, Aircraft Use Test Methods Part 502: Tensile Strength for Short Length of Optical Fibres (Edition P 1)
  • ASD-STAN PREN 3745-402-1997 Aerospace Series Fibres and Cables, Optical, Aircraft Use Test Methods Part 402: Temperature Cycling (Edition P 1)
  • ASD-STAN PREN 3745-505-2006 Aerospace series Fibres and cables, optical, aircraft use Test methods Part 505: Cable tensile strength (Edition P 1)
  • ASD-STAN PREN 3745-505-2016 Aerospace series Fibres and cables@ optical@ aircraft use Test methods Part 505: Cable tensile strength (Edition P 2)
  • ASD-STAN PREN 2591-FD6-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part FD6 - Optical Elements Mechanical Endurance (Edition P 1)
  • ASD-STAN PREN 2591-617-1997 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 617: Optical Elements Temperature Cycling (Edition P 1)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Spectrophotometric standard cadmium series

  • PREN 3745-502-1998 Aerospace Series Fibres and Cables@ Optical@ Aircraft Use Test Methods Part 502: Tensile Strength for Short Length of Optical Fibres (Edition P 1)
  • PREN 3745-305-1997 Aerospace Series Fibres and Cables@ Optical@ Aircraft Use Test Methods Part 305: Immunity to Ambient Light Coupling (Edition P 1)
  • PREN 3226-1992 Aerospace Series Nuts@ Hexagon@ Plain@ Normal Height@ Normal Across Flats@ in Steel@ Cadmium Plated Classification: 1 100 MPa (at Ambient Temperature) / 235 Degrees Celsius (Edition P 1)
  • PREN 3745-402-1997 Aerospace Series Fibres and Cables@ Optical@ Aircraft Use Test Methods Part 402: Temperature Cycling (Edition P 1)
  • PREN 3745-705-2006 Aerospace series Fibres and cables@ optical@ aircraft use Test methods Part 705: Contrast measurement (Edition P 1)
  • PREN 3745-601-2006 Aerospace series Fibres and cables@ optical@ aircraft use Test methods Part 601: Smoke density (Edition P 1)
  • PREN 2591-607-1997 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 607: Optical Elements Immunity to Ambient Light Coupling (Edition P 1)
  • PREN 3745-505-2006 Aerospace series Fibres and cables@ optical@ aircraft use Test methods Part 505: Cable tensile strength (Edition P 1)
  • PREN 3733-007-2005 Aerospace Series Connector@ Optical@ Circular@ Single Channel@ Coupled by Self-Locking Ring@ Operating Temperature up to 150 Degrees Celsius Continuous Part 007: Ferrule (Optical Contact) for EN 4532 (200/280um Fibre) - Product Standard (Edition P 1)
  • PREN 3733-007-2001 Aerospace Series Connector@ Optical@ Circular@ Single Channel@ Coupled by Self-Locking Ring@ Operating Temperatures up to 150 Degrees Celsius Continuous Part 007: Ferrule (Optical Contact) for EN 4532 (200/280um Fibre) - Product Standard (Edition 2E)
  • PREN 3745-505-2016 Aerospace series Fibres and cables@ optical@ aircraft use Test methods Part 505: Cable tensile strength (Edition P 2)
  • PREN 2591-617-1997 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 617: Optical Elements Temperature Cycling (Edition P 1)
  • PREN 4309-1996 Aerospace Series Nuts@ Hexagon@ Self-Locking by Plastic Ring@ Normal Height@ Normal Across Flats@ in Alloy Steel@ Cadmium Plated Classification : 900 MPa (at Ambient Temperature) / 120 Degrees Celsius (Edition P 1)
  • PREN 4641-301-2010 Aerospace series Cables@ optical 125 μm diameter cladding Part 301: Tight structure 50/125 μm GI fibre nominal 1@8 mm outside diameter Product standard (Edition P1)
  • PREN 2267-008-1998 Aerospace Series Cables@ Electrical@ for General Purpose Operating Temperatures between -55 Degrees Celsius and 260 Degrees Celsius Part 008: DMU Family@ Single UV Laser Printable and Multicore Assembly Product Standard
  • PREN 2267-010-2003 Aerospace Series Cables@ Electrical@ for General Purpose Operating Temperatures between -55 Degrees C and 260 Degrees C Part 010: DR family@ single UV laser printable Product standard (Edition P 1)

International Organization for Standardization (ISO), Spectrophotometric standard cadmium series

  • ISO 6647-2:2020 Rice — Determination of amylose content — Part 2: Spectrophotometric routine method without defatting procedure and with calibration from rice standards

American National Standards Institute （ANSI), Spectrophotometric standard cadmium series

  • BS EN 2591-508:2023 Aerospace series. Elements of electrical and optical connection. Test methods Measurement of thickness of coating on contacts (British Standard)

Guangdong Provincial Standard of the People's Republic of China, Spectrophotometric standard cadmium series

  • DB44/T 1496.2-2016 Calibration methods for LED test instruments Part 2: Goniophotometric test systems

The American Road & Transportation Builders Association, Spectrophotometric standard cadmium series

  • AASHTO T 353-2014 Standard Method of Test for Particle Size Analysis of Hydraulic Cement and Related Materials by Light Scattering

AASHTO - American Association of State Highway and Transportation Officials, Spectrophotometric standard cadmium series

  • T 353-2014 Standard Method of Test for Particle Size Analysis of Hydraulic Cement and Related Materials by Light Scattering

CH-SNV, Spectrophotometric standard cadmium series

  • SN EN ISO 6647-2:2021 Rice - Determination of amylose content - Part 2: Spectrophotometric routine method without defatting procedure and with calibration from rice standards (ISO 6647-2:2020)

PL-PKN, Spectrophotometric standard cadmium series

  • PN-EN ISO 6647-2-2021-02 E Rice - Determination of amylose content - Part 2: Spectrophotometric routine method without defatting procedure and with calibration from rice standards (ISO 6647-2:2020)

AENOR, Spectrophotometric standard cadmium series

  • UNE-EN 3112:1996 AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN ALLOYS STEEL, CADMIUM PLATED. CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 oC.
  • UNE-EN 2591-301:1996 AEROSPACE SERIES. ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION. TEST METHODS. PART 301: ENDURANCE AT TEMPERATURE.
  • UNE-EN 2591-216:1998 AEROSPACE SERIES. ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION. TEST METHODS. PART 216: ENGAGEMENT DEPTH OF CONTACTS.

  Spectrophotometric standard cadmium series, Spectrophotometric standard cadmium series.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved