ZH
RU
ES

Can't connect to UV

Can't connect to UV, Total:130 items.

In the international standard classification, Can't connect to UV involves: Electrical accessories, Pipeline components and pipelines, Environmental protection, Non-destructive testing, Aerospace electric equipment and systems, Surface treatment and coating, Fasteners for aerospace construction, Medical equipment, Kitchen equipment, Components and accessories for telecommunications equipment, On-board equipment and instruments, Electromechanical components for electronic and telecommunications equipment, Open systems interconnection (OSI), Installations in buildings, Screw threads, Shipbuilding and marine structures in general, Inland navigation vessels, Fluid storage devices, Petroleum, petroleum products and natural gas handling equipment, Rubber and plastics products, Insulating materials, Transformers. Reactors, Electrical wires and cables, Fibre optic communications.

American National Standards Institute （ANSI), Can't connect to UV

ANSI/EIA 364-49:2013 Ultraviolet Radiation Test Procedure for Electrical Connectors and Sockets
ANSI C57.12.25-1990 Transformers - Pad-Mounted, Compartmental-Type, Self-Cooled, Single-Phase Distri- bution Transformers with Separable Insulated High-Voltage Connectors; High Voltage, 34 500 GrdY/19 920 Volts and Below; Low-Voltage, 240/ 120 Volts; 167 kVA and Smaller - Re

GM North America, Can't connect to UV

GMP.ABS.004-2010 ABS - Ultraviolet Light Stabilized, Low Gloss Issue 4; Do Not Use on New Programs; Replaced by GMW15572
GMP.ABS.003-2010 ABS - Medium High Heat Resistant, Ultraviolet Light Stabilized Revision 6; Do Not Use on New Programs; Replaced by GMW15572
GMP.PMMA.002-2010 Acrylic - Ultraviolet Stabilized, Medium High Heat Resistant Issue 2; Do Not Use on New Programs; Replaced by GMW16335
GMP.PVC.042-2011 PVC ?UV Stabilized, Heat Stabilized, Castable Powder Issue 3; Do Not Use on New Programs; Replaced by GMW16081
GMP.ABS+PC.002-2010 ABS+PC, Heat Stable, Injection Molded, Low UV Stable Issue 4; Do Not Use on New Programs; Replaced by GMW15581
GMP.ABS+PC.017-2010 ABS+PC, UV Stable, Heat Stable, Injection Molded Issue 4; Do Not Use on New Programs; Replaced by GMW15581
GMP.ABS.009-2010 ABS - High Heat Resistant, Ultraviolet Light Stabilized, Injection Molding Grade, Pellet Form Issue 3; Do Not Use on New Programs; Replaced by GMW15572
GMP.PP.037-2011 Polypropylene ?Copolymer, UV Stabilized, High Impact, Injection Molding Grade Issue 5; Do Not Use on New Programs; Replaced by GMW16208
GMP.PA6.025R-2011 Nylon 6 ?Recycled, 34% Mineral Filled, UV Stable, Heat Stabilized Issue 2; Do Not Use on New Programs; No Replacement
GM GMP.PA6.045-2013 Nylon 6 - 33% Glass Fiber Reinforced, UV Stabilized, Heat Stabilized Issue 4; Do Not Use on New Programs; Replaced by GMW16582
GM GMP.PA66/6.004-2013 Nylon 66/6 - 33% Glass Fiber Reinforced, UV Stable, Heat Stabilized Issue 5; Do Not Use on New Programs; No Replacement
GMP.PVC.037-2011 PVC ?80 Shore A, UV Stabilized, Integral Colored, Injection Molding Compound Issue 2; Do Not Use on New Programs; Replaced by GMW16080
GMP.PVC.089-2011 PVC ?70 Shore A, UV Stabilized, Low Gloss, Dry Feel, Injection Molding Grade Issue 3; Do Not Use on New Programs; Replaced by GMW16080
GMP.PVC.023-2011 PVC ?70 Shore A, UV Stabilized, Integral Colored, Injection Molding Compound Issue 3; Do Not Use on New Programs; Replaced by GMW16080
GM1131M-2011 Sealing Compounds for Use With Fasteners and Attaching Clips Issue 5; Do Not Use on New Programs; No Replacement

Electronic Components, Assemblies and Materials Association, Can't connect to UV

ECA EIA-364-49-2013 TP-49 Ultraviolet Radiation Test Procedure for Electrical Connectors and Sockets

ECIA - Electronic Components Industry Association, Can't connect to UV

EIA-364-49-2013 TP-49 Ultraviolet Radiation Test Procedure for Electrical Connectors and Sockets

Association Francaise de Normalisation, Can't connect to UV

NF A49-716:2006 Steel tubes and fitting for onshore and offshore pipelines - External field joint coatings.
NF C93-025:1984 ELECTRONIC COMPONENTS. SOLDERLESS TERMINATION PRESS-IN CONNECTIONS FOR PRINTED CIRCUIT BOARDS.
NF L54-002-080*NF EN 2591-512:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 512 : effectiveness of non-removable fixing of hermetically sealed connector shell
NF C93-406-3-100*NF EN 61076-3-100:2000 Connectors for use in d.c., low frequencey analogue and digital high speed data applications - Part 3-100 : rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-remov
NF C93-403-101*NF EN 61076-3-101:1998 Connectors with assessed quality, for use in D.C. Low-frequency analogue and in digital high-speed data applications. Part 3 : rectangular connectors. Section 101 : detail specification for a range of shielded connectors with trapezoidal shaped shells and
NF EN 2591-512:2002 Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 512 : efficacité de la fixation non démontable du boîtier des connecteurs hermétiques
NF C93-565-21*NF EN 60169-21:1998 Radio-frequency connectors. Part 21 : two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling. Characteristic impedance 50 ohms (types SC-A and SC-B).
NF E03-005-2*NF EN ISO 228-2:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 2 : verification by means of limit gauges.
NF Z66-444:1993 Information systems interconnection - Provision of the OSI connection - mode transport service using the OSI connection-mode network service in an end system attached to a LAN - Part4: Local area subnetwork-type dependent requirement for the token ring me
NF L54-175-006*NF EN 3545-006:2015 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperature - 55 oC to 175 oC - Part 006 : male coding and attachment system for mounting on fixed housing (receptacle) - P
NF L54-191:1988 Matériels aéronautiques - Connecteurs électriques rectangulaires étanches et non étanches à l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation -55 degrés Celsius à 175 degrés Celsius
NF EN 3218-006:2006 Série aérospatiale - Connecteurs rectangulaires à boitiers métalliques et à verrouillage par vis - Partie 006 : embase avec contacts à braser, taille 22, non démontables - Norme de produit
NF EN 3218-005:2006 Série aérospatiale - Connecteurs rectangulaires à boîtiers métalliques et à verrouillage par vis - Partie 005 : fiche avec contacts à braser, taille 22, non démontables - Norme de produit
NF C78-202:1993 Electric fence energizers. Safety requirements for battery-operated electric fence energizers not for connection to the supply mains.
NF C93-909-087-6*NF EN 61753-087-6:2012 Fibre optic interconnecting devices and passive components - Performance standard - Part 087-6 : non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O - Uncontrolled environment
NF D36-123:2001 Household economy - Corrugated metallic flexible piping, other than flexible piping to standards NF D 36-121 and NF D 36-125, for the external connection of gas-fired appliances.

RU-GOST R, Can't connect to UV

GOST 13971-1974 Connector tees for tube connections on external cone. Construction and dimensions
GOST 24264.2-1994 Anaesthetic and respiratory equipment. Conical connectors. Part 2. Screw-threaded weight-bearing connectors

VDE - VDE Verlag GmbH@ Berlin@ Germany, Can't connect to UV

FNN SPEICHER AM NIEDERSPANNUNGSNETZ-2019 Anschluss und Betrieb von Speichern am Niederspannungsnetz - Praxisnahe Definition verschiedener Anschlussvarianten

国家市场监督管理总局、中国国家标准化管理委员会, Can't connect to UV

GB/T 29132-2018 Ships and marine technology—Marine environment protection—Adapter for joining dissimilar boom connectors

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Can't connect to UV

GB/T 29132-2012 Ships and marine technology.Marine environmental protection.Adaptor for joining dissimilar boom connectors
GB/T 32767-2016 Standard field test for the evaluation of wood preservatives by L-joint

American Society for Testing and Materials (ASTM), Can't connect to UV

ASTM F1349-08(2019) Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors
ASTM C1541-02 Standard Specification for Shielded Transition Couplings Using Flexible Poly Vinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings
ASTM F1500-98(2019) Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
ASTM C1541-12(2017) Standard Specification for Shielded Transition Couplings Using Flexible Polyvinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings

British Standards Institution (BSI), Can't connect to UV

BS EN 2591-512:2002 Elements of electrical and optical connection - Test methods - Effectiveness of non-removable fixing of hermetically sealed connector shell
BS EN 10329:2006 Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings
BS 5505-3:1977 Specification for bidets - Vitreous china bidets over rim supply only - Quality, workmanship and functional dimensions other than connecting dimensions
17/30345443 DC BS ISO 2100-512. Aerospace elements of electrical and optical connection. Test methods. Part 512. Effectiveness of non-removable fixing of hermetically sealed connector shell
BS EN 61076-3-101:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications. Rectangular connectors. Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rect...
BS EN 61076-3-100:2004 Connectors for use in d.c., low-frequency analogue and digital high-speed data applications. Rectangular connectors with assessed quality. Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon cont
BS EN 61076-3-100:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100:Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removabl
BS EN 15869-3:2013 Inland navigation vessels. Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz. On-board unit, safety requirements
BS 7383:1990 Specification for cold-pour resin-based compound for use as a filling medium in terminating cables in enclosures for voltages not exceeding 11 kV for use in coal mines
BS EN 60169-21:1997 Radio-frequency connectors. Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling. Characteristic impedance 50 ohms (types SC-A and SC-B)
21/30421483 DC BS EN IEC 61753-022-07. Fibre optic interconnecting devices and passive components. Performance standard. Part 022-07. Hardened fibre optic connectors terminated on multimode fibre for category A. Outdoor aerial environment
20/30429784 DC BS EN 61169-21. Radio-frequency connectors. Part 21. Two types of radio-frequency connectors with inner diameter of outer conductor 9.5 mm (0.374 in) with different versions of screw coupling. Characteristic impedance 50 ohms (Types SC-A and SC-B)
BS 3531 Sec.5.3:1991 Implants for osteosynthesis. Bone screws and auxiliary equipment. Specification for the dimensions of screws having hexagonal drive connection, spherical under-surfaces and asymmetrical thread

German Institute for Standardization, Can't connect to UV

DIN EN 10329:2006 Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings; English version of DIN EN 10329:2006-04
DIN 47636-3:1986 Separable accessories for power cable for bushing with outside cone; U<(Index)m> up to 36 kV, bushing without mounting flange and eyelet-fastening for the separable connector
DIN EN 60169-21:1998 Radio-frequency connectors - Part 21: Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (O,374 in) with different versions of screw coupling - Characteristic impedance 50 (Types SC-A and SC-B) (IEC 60169-21:1985 +
DIN 47636-4:1986 Separable accessories for power cable for bushing with outside cone; U<(Index)m> up to 36 kV, bushing without mounting flange and screw-fastening for the separable connector
DIN 81846-2:2007-12 Stud link anchor chain cables, Grade K4 - Assembly, applied forces and breaking forces - Part 2: Type B without chain outboard shots; Text in German and English
DIN 3489:2001-11 Couplings for compressed air - Claw coupling, 42 mm internal width, without securing nut - Coupling with male, female, hose and closure connection ends, rotary claw couplings, joint ring / Note: To be replaced by DIN 3489 (in preparation).
DIN 3489:2023-03 Couplings for compressed air - Claw coupling, 42 mm internal width, without securing nut - Coupling with male, female, hose and closure connection ends, rotary claw couplings, joint ring / Note: Date of issue 2023-02-17*Intended as replacement for DIN ...
DIN 3489:2023-11 Couplings for compressed air - Claw coupling, 42 mm internal width, without securing nut - Coupling with male, female, hose and closure connection ends, rotary claw couplings, joint ring
DIN EN 61076-3-100:2000-10 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality; detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-remov...
DIN EN 3545-006:2015-06 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 006: Male coding and attachment System for mounting on fixed housing (receptacle)...
DIN EN 61753-086-6:2011-09 Fibre optic interconnecting devices and passive components - Performance standard - Part 086-6: Non-connectorized single-mode bidirectional 1 490/1 550 nm downstream and 1 310 nm upstream WWDM devices for category O - Uncontrolled environment (IEC 6175...
DIN EN 61753-087-6:2012-12 Fibre optic interconnecting devices and passive components - Performance standard - Part 087-6: Non-connectorised single-mode bidirectional 1 310 nm upstream and 1 490 nm downstream WWDM devices for category O - Uncontrolled environment (IEC 61753-087-...
DIN EN 3218-006:2006-09 Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 006: Receptacle with non-removable size 22 solder contacts - Product standard; German and English version EN 3218-006:2006
DIN EN 3218-005:2006-09 Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 005: Plug with non-removable size 22 solder contacts - Product standard; German and English version EN 3218-005:2006
DIN EN 60169-21:1998-02 Radio-frequency connectors - Part 21: Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (O,374 in) with different versions of screw coupling - Characteristic impedance 50 <Ohm> (Types SC-A and SC-B) (IEC 60169-...
DIN 47636-6:1989 Bushing for separable accessories for power cable with protruding cone; U<(Index)m> up to 36 kV, bushing without mounting flange and threaded inserts for the separable connector

European Committee for Standardization (CEN), Can't connect to UV

EN 10329:2006 Steel tubes and fittings for onshore and offshore pipelines External field joint coatings
EN 2591-512:2002 Aerospace series - Elements of electrical and optical connection; Test methods - Part 512: Effectiveness of non-removeable fixing of hermetically sealed connector shell

ISA - International Society of Automation, Can't connect to UV

ISA TR100.15.01-2012 Backhaul Architecture Model: Secured Connectivity over Untrusted or Trusted Networks

Electronic Components, Assemblies and Materials Association, Can't connect to UV

ECA 700AOAE-2000 Detail Specification for Trapezoidal Connectors with Nonremovable Ribbon Cable Contacts on 1.27mm Pitch Double Row Used with Single Connector Attachments (SCA2)

(U.S.) Ford Automotive Standards, Can't connect to UV

FORD ESB-M15P23-A3-2013 COEXTRUDED MOLDINGS, VINYL/STAINLESS STEEL EXTERIOR - MECHANICALLY ATTACHED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESB-M15P23-A1)
FORD WSS-M3D187-A2-2005 UNSATURATED POLYESTER (UP), 50% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND U.V. STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSS-M3D187-A1)
FORD ESB-M15P23-A2-2013 COEXTRUDED MOLDINGS, VINYL/BI-METAL EXTERIOR-MECHANICALLY ATTACHED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESB-M15P23-A1)

TH-TISI, Can't connect to UV

TIS 1632-1998 Radio.frequency connectors.part 21: two type of radio.frequency connectors with inner diameter of outer conductor 9.5 mm.(0.374 in) with different version of screw coupling.characteristic impedance 50 ohms (type sc.a and sc.b)

International Electrotechnical Commission (IEC), Can't connect to UV

IEC 60169-21:1985 Radio-frequency connectors. Part 21 : Two types of radio-frequency connectors with inner diameter of outer conductor 9.5 mm (O.374 in) with different versions of screw coupling - Characteristic impedance 50 ohms (Types SC-A and SC-B)
IEC 60169-21:1985/AMD1:1996 Radio frequency connectors - Part 21: Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling - Characteristic impedance 50 ohms (types SC-A and SC-B); Amendment 1
IEC 61076-3-101:1997/COR1:2010 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells an
IEC 61076-3-100:1999 Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removab

Danish Standards Foundation, Can't connect to UV

DS/EN 2591-512:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 512: Effectiveness of non-removeable fixing of hermetically sealed connector shell
DS/EN 61076-3-100:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removab
DS/EN 3218-005:2006 Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 005: Plug with non-removable size 22 solder contacts - Product standard
DS/EN 60169-21:1998 Radio-frequency connectors - Part 21: Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling - Characteristic impedance 50 ohms (types SC-A and SC-B)
DS/EN 3218-006:2006 Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 006: Receptacle with non-removable size 22 solder contacts - Product standard
DS/EN 61753-087-6:2012 Fibre optic interconnecting devices and passive components - Performance standard - Part 087-6: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O - Uncontrolled environment

Lithuanian Standards Office , Can't connect to UV

LST EN 2591-512-2003 Aerospace series - Elements of electrical and optical connection - Test methods - Part 512: Effectiveness of non-removable fixing of hermetically sealed connector shell
LST EN 61076-3-100-2001 Connectors for use in d.c., low- frequency analogue and digital high speed data applications. Part 3-100: Rectangular connectors with assessed quality. Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removabl
LST EN 3218-005-2006 Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 005: Plug with non-removable size 22 solder contacts - Product standard
LST EN 60169-21-2002 Radio-frequency connectors. Part 21: Two types of radio- frequency connectors with inner diameter of outer conductor 9, 5 mm (O, 374 in) with different versions of screw coupling - Characteristic impendance 50 ohms (Types SC-A and SC-B) (IEC 60169-21:1985
LST EN 3218-006-2006 Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 006: Receptacle with non-removable size 22 solder contacts - Product standard
LST EN 61753-087-6-2012 Fibre optic interconnecting devices and passive components - Performance standard -- Part 087-6: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O - Uncontrolled environment (IEC 61753-087-6:20

ES-UNE, Can't connect to UV

UNE-EN 2591-512:2002 Aerospace series. Elements of electrical and optical connection. Test methods. Part 512: Effectiveness of non removeable fixing of hermetically sealed connecter shell (Endorsed by AENOR in August of 2002.)
UNE-EN 3218-005:2006 Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 005: Plug with non-removable size 22 solder contacts - Product standard (Endorsed by AENOR in July of 2006.)
UNE-EN 3545-006:2015 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 006: Male coding and attachment System for mounting on fixed housing (receptacle)...
UNE-EN 61753-086-6:2011 Fibre optic interconnecting devices and passive components - Performance standard -- Part 086-6: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category O - Uncontrolled environment (Endor...
UNE-EN 61753-087-6:2012 Fibre optic interconnecting devices and passive components - Performance standard - Part 087-6: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O - Uncontrolled environment (Endorsed by AENO...
UNE-EN 3218-006:2006 Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 006: Receptacle with non-removable size 22 solder contacts - Product standard (Endorsed by AENOR in July of 2006.)

Standard Association of Australia （SAA）, Can't connect to UV

AS 2255:2003(R2014)

IT-UNI, Can't connect to UV

UNI 3873-1957

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Can't connect to UV

PREN 2591-512-1997 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 512: Effectiveness of Non-Removable Fixing of Hermetically Sealed Connector Shell (Edition P 1)
PREN 2591-E12-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part E12 - Recommendation to Check Effectiveness of Non Removable Fixing of Hermetically Sealed Connector Shell
PREN 3545-005-1995 Aerospace Series Connectors@ Electrical@ Rectangular@ with Sealed and Non-Sealed Rear@ Plastic Housing@ Locking Device@ Operating Temperatures - 55 Degrees C to 175 Degrees C Part 005 : Female Coding and Attachment System for Mounting on Free Housing (Plu
PREN 3218-006-1995 Aerospace Series Connector@ Rectangular@ with Metallic Shells and Screw-Locking Part 006: Receptacle with Non-Removable Size 22 Solder Contacts Product Standard (Edition P1)
PREN 3545-006-1995 Aerospace Series Connectors@ Electrical@ Rectangular@ with Sealed and Non-Sealed Rear@ Plastic Housing@ Locking Device@ Operating Temperatures - 55 Degrees C to 175 Degrees C Part 006: Male Coding and Attachment System for Mounting on Fixed Housing (Recep
PREN 3545-005-2013 Aerospace series Connectors@ electrical@ rectangular@ with sealed and non-sealed rear@ plastic housing@ locking device@ operating temperatures ? 55 °C to 175 °C Part 005: Female coding and attachment system for mounting on free housing (plug) Product stan
PREN 3218-005-1995 Aerospace Series Connector@ Rectangular@ with Metallic Shells and Screw-Locking Part 005: Plug for Non-Removable Size 22 Solder Contacts Product Standard (Edition P1)

Korean Agency for Technology and Standards (KATS), Can't connect to UV

KS X ISO/IEC 11188-2-2002(2007) Information technology－International Standardized Profiles－Common upper layer requirements－Part 2：Basic connection oriented requirementsfor ROSE-based profiles

European Committee for Electrotechnical Standardization（CENELEC）, Can't connect to UV

EN 60169-21:1997 Radio-Frequency Connectors Part 21: Two Types of Radio-Frequency Connectors with Inner Diameter of Outer Conductor 9,5 mm (0,374 in) with Different Versions of Screw Coupling Characteristic Impendance 50 ohms (Types SC-A and SC-B)
EN 61076-3-100:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removab
EN 61753-087-6:2012 Fibre optic interconnecting devices and passive components - Performance standard - Part 087-6: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O - Uncontrolled environment

Aerospace, Security and Defence Industries Association of Europe (ASD), Can't connect to UV

ASD-STAN PREN 2591-512-1997 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 512: Effectiveness of Non-Removable Fixing of Hermetically Sealed Connector Shell (Edition P 1)
ASD-STAN PREN 2591-E12-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part E12 - Recommendation to Check Effectiveness of Non Removable Fixing of Hermetically Sealed Connector Shell
ASD-STAN PREN 3545-006-2013 Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 掳C to 175 掳C Part 006: Male coding and attachment system for mounting on fixed housing (receptacle) Prod
ASD-STAN PREN 3545-005-2013 Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures ? 55 °C to 175 °C Part 005: Female coding and attachment system for mounting on free housing (plug) Product stan
ASD-STAN PREN 3545-006-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 006: Male Coding and Attachment System for Mounting on Fixed Housing (Recep

PT-IPQ, Can't connect to UV

NP 4392-2000 Non metallic flexible hoses with ou without armour and fittings for the connection of LPG cylinders to installations

Canadian Standards Association (CSA), Can't connect to UV

CSA ISO-5835-00-CAN/CSA:2000 Implants for Surgery - Metal Bone Screws with Hexagonal Drive Connection, Spherical Under-Surface of Head, Asymmetrical Thread - Dimensions Second Edition; ISO 5835: 1991
CSA ISO/IEC ISP 10609-10-99:1999 Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 10: LAN Subnetwork-Dependent, Media-Independent Requirements ISO/IEC ISP 10609-10: 1994
CSA ISO/IEC ISP 10609-11-99:1999 Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 11: CSMA/CD Subnetwork-Dependent, Media-Independent Requirements ISO/IEC ISP 10609-11: 1994

ZA-SANS, Can't connect to UV

PIESA 1012-2004 Cable terminations and live conductors within air-insulated enclosures (insulation co-ordination) for rated a.c. voltages of 7,2 kV and up to and including 36 kV
NRS 012-2002 Cable terminations and live conductors within air-insulated enclosures (insulation co-ordination) for rated a.c. voltages of 7,2 kV and up to and including 36 kV

International Telecommunication Union (ITU), Can't connect to UV

ITU-T K.20 AMD 1-2004 Resistibility of telecommunication equipment installed in a telecommunications centre to overvoltages and overcurrents Amendment 1: New Appendix I ?Floating transverse power induction and earth potential rise test for ports connected to external symmetri

WRC - Welding Research Council, Can't connect to UV

BULLETIN 153-1970 INTERPRETIVE REPORT ON OBLIQUE NOZZLE CONNECTIONS IN PRESSURE VESSEL HEADS AND SHELLS UNDER INTERNAL PRESSURE LOADING; ELASTIC STRESSES NEAR A SKEWED HOLE IN A FLAT PLATE AND APPLICATIONS TO OBLIQUE N