ZH
RU
ES

absolute factor

absolute factor, Total:153 items.

In the international standard classification, absolute factor involves: Electricity. Magnetism. Electrical and magnetic measurements, Insulating materials, Insulation, Electrical engineering in general, Photography, Rotating machinery, Electrical wires and cables, Insulating fluids, On-board equipment and instruments, Analytical chemistry, Fuels, Equipment for petroleum and natural gas industries, Optoelectronics. Laser equipment, Resistors, General methods of tests and analysis for food products, Pipeline components and pipelines, Printed circuits and boards, Ceramics.

Japanese Industrial Standards Committee (JISC), absolute factor

JIS C 2138:2007 Electrical insulating materials -- Methods for the determination of the relative permittivity and dielectric dissipation factor
JIS C 62125:2022 Environmental considerations specific to insulated electrical power and control cables
JIS R 1697:2015 Absolute measurement of internal quantum efficiency of phosphors for white light emitting diodes using an integrating sphere
JIS K 0167:2011 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
JIS K 7041:1998 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the creep factor under dry conditions

GM North America, absolute factor

GM GM9176P-1993 Procedure for Determining the Relative Power Factor of Dielectric Sealing Tape

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, absolute factor

GB/T 20111.6-2022 Electrical insulation systems—Procedures for thermal evaluation—Part 6:Multifactor evaluation with increased factors during diagnostic testing
GB/T 5654-2007 Insulating liquids.Measurement of relative permittivity,dielectric dissipation factor and d.c.resistivity
GB/T 25186-2010 Surface chemical analysis.Secondary-ion mass spectrometry.Determination of relative sensitivity factors from ion-implanted reference materials
GB/T 5654-1985 Measurement of relative permittivity,dielectric dissipation factor at power frequency and volume resistivity of insulating liquids
GB/T 17948.5-2016 Rotating electrical machines.Functional evaluation of insulation systems.Test procedures for form-wound windings.Multifactor evaluation by endurance under simultaneous thermal and electrical stresses
GB/T 1409-1988 Methods for the determination of the permittivity and dielectric dissipation factor of solid electrical insulating materials at power,audio and radio frequencies including metre wavelengths
GB/T 17948.5-2007 Rotating electrical machines.Functional evaluation of insulation systems.Test procedures for form-wound windings.Multifactor functional evaluation.Endurance under combined thermal and electrical stresses of insulation systems used in machines up to and in
GB/T 30702-2014 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials

HU-MSZT, absolute factor

Group Standards of the People's Republic of China, absolute factor

T/CEEIA 343-2018 Evaluation method of multifactor endurance for traction motor’s insulation systems

National Electrical Manufacturers Association（NEMA), absolute factor

NEMA C29.17-2013 For Composite Insulators - Transmission Line Post Type

Korean Agency for Technology and Standards (KATS), absolute factor

KS B 5410-2013(2018) Methods of measurement for vignetting factor and relative focal plane illuminance
KS B 5410-1982 Methods of measurement for vignetting factor and relative focal plane illuminance
KS C IEC 60034-27-3:2019 Rotating electrical machines — Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
KS D ISO 18114-2005(2020) Surface chemical analysis－Secondary-ion mass spectrometry－Determination of relative sensitivity factors from ion-implanted reference materials
KS M ISO 13740-2003(2018)
KS D ISO 18118-2005(2020) Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of h
KS C IEC 62631-2-1:2020 Dielectric and resistive properties of solid insulating materials —Part 2-1: Relative permittivity and dissipation factor —Technical frequencies(0.1 Hz ~ 10 MHz) — AC methods
KS D ISO 18118:2005 Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
KS C IEC 60250-2003(2018) Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths

British Standards Institution (BSI), absolute factor

BS EN 60034-27-3:2016 Rotating electrical machines. Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
BS IEC 62125:2019 Tracked Changes. Environmental considerations specific to insulated electrical power and control cables
BS 2067:1953 Determination of power-factor and permittivity of insulating materials (Hartshorn & Ward method)
BS EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity
20/30409889 DC BS ISO 18114. Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative sensitivity factors from ion-implanted reference materials
BS ISO 18114:2021 Tracked Changes. Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative sensitivity factors from ion-implanted reference materials
BS EN IEC 62631-2-2:2022 Dielectric and resistive properties of solid insulating materials - Relative permittivity and dissipation factor. High frequencies (1 MHz to 300 MHz). AC methods
BS EN IEC 62631-2-1:2018 Dielectric and resistive properties of solid insulating materials. Relative permittivity and dissipation factor. Technical frequencies (0,1 Hz to 10 MHz). AC Methods
BS EN ISO 22753:2022 Molecular biomarker analysis. Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains. General requirements
23/30461294 DC BS ISO 18118. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
BS ISO 22753:2021 Molecular biomarker analysis. Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains. General requirements
20/30364895 DC BS ISO 22753. Molecular biomarker analysis. Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains. General requirements and definitions
BS ISO 18118:2015 Tracked Changes. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
BS EN 12873-3:2019 Tracked Changes. Influence of materials on water intended for human consumption. Influence due to migration. Test method for ion exchange and adsorbent resins

American Society for Testing and Materials (ASTM), absolute factor

ASTM D924-04 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
ASTM D924-03 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
ASTM D924-03a Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
ASTM D3588-98(2017)e1 Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
ASTM D3588-98(2011) Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
ASTM D1673-94(1998) Standard Test Methods for Relative Permittivity And Dissipation Factor of Expanded Cellular Polymers Used For Electrical Insulation
ASTM D1673-94(2004) Standard Test Methods for Relative Permittivity And Dissipation Factor of Expanded Cellular Polymers Used For Electrical Insulation
ASTM E3029-15 Standard Practice for Determining Relative Spectral Correction Factors for Emission Signal of Fluorescence Spectrometers
ASTM D3380-14 Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
ASTM D3380-10 Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
ASTM D3380-90(1995)e1 Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates

KR-KS, absolute factor

KS B 5410-2023 Measurement method for vignetting factor and relative illuminance of photographic lenses
KS C IEC 60034-27-3-2019 Rotating electrical machines — Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
KS C IEC 62631-2-1-2020 Dielectric and resistive properties of solid insulating materials —Part 2-1: Relative permittivity and dissipation factor —Technical frequencies(0.1 Hz ~ 10 MHz) — AC methods

PL-PKN, absolute factor

PN E04410-22-1986 Electroinsulating varnishes Test methods Testing of dissipation factor and permittivity

RO-ASRO, absolute factor

STAS 11342-1979 ANIONIC ASPHALTIC EMULSION WITH SLOW BRF.AKING I FOR HYDROINSULATIONS
STAS 8293-1990 Industrial-process measurement and control. Differential relative and absolute pressure analogue electronic transducers. General technical requirements

FI-SFS, absolute factor

SFS 5355-1987

Taiwan Provincial Standard of the People's Republic of China, absolute factor

CNS 14765-2003 Standard practice for calculating heat value, compressibility factor, and relative density of gaseous fuels
CNS 8787-1988 Method for Determining Dielectric Constant and Dielectric Dissipation Factor of Heat Shrinkable Tubing for Electrical Insulation

API - American Petroleum Institute, absolute factor

API PUBL 4515-1990 Use of Reactivity Factors to Predict Ozone Impacts of Methanol Fuel
API PUBL 2524-1992 Impact Assessment of New Data on the Validity of American Petroleum Institute Marine Transfer Operation Emission Factors
API MPMS 11.1 VOL VI-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume VI Table 24C - Volume Correction Factors for Individual and Special Applications Volume Correction to 60 Degrees F Against Thermal Expansion Coefficients at 60 Degre
API MPMS 11.1 VOL III-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume III Table 6C - Volume Correction Factors for Individual and Special Applications Volume Correction to 60 Degrees F Against Thermal Expansion Coefficients at 60 Degre
API MPMS 11.1 VOL IX-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume IX Table 54C - Volume Correction Factors for Individual and Special Applications Volume Correction to 15 Degrees C Against Thermal Expansion Coefficients at 15 Degre

International Electrotechnical Commission (IEC), absolute factor

IEC 60034-27-3:2015 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
IEC 60247:1978 Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity of insulating liquids
IEC 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity
IEC 62631-2-2:2022 Dielectric and resistive properties of solid insulating materials - Part 2-2: Relative permittivity and dissipation factor - High frequencies (1 MHz to 300 MHz) - AC methods
IEC 60034-18-33:1995 Rotating electrical machines - Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor functional evaluation - Endurance under combined thermal and electrical stresses of insulation systems used in machines up t
IEC 2/1651/CD:2011 IEC/TS 60034-27-3, Ed. 1: Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines

Institute of Electrical and Electronics Engineers (IEEE), absolute factor

IEEE Std 286-2000 IEEE Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation
IEEE No 286-1968 IEEE Recommended Practice for Measurement of Power-Factor Tip-Up of Rotating Machinery Stator Coil Insulation
IEEE 286-1975 IEEE Recommended Practice for Measurement of Power-Factor Tip-Up of Rotating Machinery Stator Coil Insulation
IEEE 286-1968 IEEE Recommended Practice for Measurement of Power-Factor Tip-Up of Rotating Machinery Stator Coil Insulation
ANSI/IEEE Std 286-1975(R1981) IEEE Recommended Practice for Measurement of Power-Factor Tip-Up of Rotating Machinery Stator Coil Insulation
IEEE 286-2000 Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation
IEEE P286/D11, August 2022 IEEE Draft Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation
IEEE P286 IEEE Draft Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation

CO-ICONTEC, absolute factor

Society of Automotive Engineers (SAE), absolute factor

SAE ARP4032A-1998 Human Engineering Considerations in the Application of Color to Electronic Aircraft Displays
SAE ARP1192B-1991 PROCEDURE FOR CALIBRATION AND VERIFICATION OF A LIQUIDBORNE PARTICLE COUNTER: AN ABSOLUTE STANDARD
SAE ARP1192A-1978 PROCEDURE FOR CALIBRATION AND VERIFICATION OF LIQUID-BORNE PARTICLE COUNTER: AN ABSOLUTE STANDARD
SAE AS25036-2004 TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1, (FOR 105°C TOTAL CONDUCTOR TEMPERATURE)
SAE AS25036E-2020 TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE)
SAE AS7928/4C-2020 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, INSULATED, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 150 °C TOTAL CONDUCTOR TEMPERATURE)
SAE AS7928/12E-2020 TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL-MOUTHED, TIN WHISKER RESISTANT, TYPE II, CLASS 1, (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE)
SAE AS7928/13C-2020 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, INSULATED, TIN WHISKER RESISTANT, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 150 °C TOTAL CONDUCTOR TEMPERATURE)

Indonesia Standards, absolute factor

SNI 04-6542-2001 Measuremert of relative permitivity, dielectric dissipation factor and d.c. resistivity of insulating liquid

Association Francaise de Normalisation, absolute factor

NF C27-210*NF EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan delta) and d.c.resistivity
NF EN 60247:2004 Liquides isolants - Mesure de la permittivité relative, du facteur de dissipation diélectrique (tan delta) et de la résistivité en courant continu
NF C51-127-3*NF EN 60034-27-3:2016 Rotating electrical machines - Part 27-3 : dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
NF C26-230:1970 Methods of testing insulating materials. Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating material at power, audio and radio freq.
NF EN ISO 22753:2022 Analyse moléculaire de biomarqueurs - Méthode pour l'évaluation statistique des résultats d'analyse obtenus lors des essais de souséchantillons multiples de semences et de graines génétiquement modifiées - Exigences générales
NF C26-290-2:1993 Guide for determining the effects of ionizing radiation on insulating materials. Part 2 : procedures for irradiation and test.
NF C26-631-2-1*NF EN IEC 62631-2-1:2018 Dielectric and resistive properties of solid insulating materials - Part 2-1 : relative permittivity and dissipation factor - Technical frequencies (0,1 Hz to 10 MHz) - AC Methods
NF EN IEC 62631-2-2:2022 Propriétés diélectriques et résistives des matériaux isolants solides - Partie 2-2 : Permittivité relative et facteur de dissipation - Hautes fréquences (1 MHz à 300 MHz) - Méthodes en courant alternatif
NF EN IEC 62631-2-1:2018 Propriétés diélectriques et résistives des matériaux isolants solides Partie 2-1 : permittivité relative et facteur de dissipation - Fréquences techniques (0,1 Hz à 10 MHz) - Méthodes en courant alternatif
NF C26-290-4:1993 Guide for determining the effects of ionizing radiation on insulating materials. Part 4 : classification system for service in radiation environnements.

Danish Standards Foundation, absolute factor

DS/IEC 247:1979 Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity of insulating liquids
DS/EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan phi) and d.c. resistivity

German Institute for Standardization, absolute factor

DIN EN 60247:2005 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity (IEC 60247:2004); German version EN 60247:2004
DIN IEC/TS 60034-27-3:2012 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines (IEC 2/1651/CD:2011)
DIN EN ISO 22753:2023 Molecular biomarker analysis - Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains - General requirements (ISO 22753:2021, Corrected version 2022-11)
DIN EN ISO 22753:2023-03 Molecular biomarker analysis - Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains - General requirements (ISO 22753:2021, Corrected version 2022-11); German versio...

RU-GOST R, absolute factor

GOST R IEC 60247-2013 Insulating liquids. Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
GOST R 8.623-2006 State system for ensuring the uniformity of measurements. Relative dielectric permittivity and the loss tangent of solid dielectrics. Procedures of measurements at microwave frequencies
GOST 13873-1981 Ceramic insulators. Requirements for surface quality
GOST R 8.711-2010 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of relative dielectric permittivity and the loss tangent in range of frequencies from 1 to 78,33 GHz

AENOR, absolute factor

UNE-EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
UNE 84174:1995 ESSENTIAL OILS. EVALUATION OF THE ABSOLUTE AND RELATIVE DENSITY OF ESSENTIAL OILS. (ELECTRONIC DENSITYMETER METHOD).
UNE 135214-1:2010 Road signalization equipment. Horizontal signalization. Road markings. Daylight visibility of road markings against the pavement that supports them. Part 1: Static determination of contrast ratio (RC) by means of luminance factor of road markings against

ES-UNE, absolute factor

UNE-EN 60247:2004 ERRATUM:2005 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
UNE-EN 60034-27-3:2016 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines (Endorsed by AENOR in August of 2016.)
UNE-EN IEC 62631-2-2:2022 Dielectric and resistive properties of solid insulating materials - Part 2-2: Relative permittivity and dissipation factor - High frequencies (1 MHz to 300 MHz) - AC methods (Endorsed by Asociación Española de Normalización in July of 2022.)
UNE-EN IEC 62631-2-1:2018 Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical frequencies (0,1 Hz to 10 MHz) - AC Methods (Endorsed by Asociación Española de Normalización in June of 2018.)

International Commission on Illumination (CIE), absolute factor

CIE 65-1985 Electrically Calibrated Thermal Detectors of Optical Radiation: (Absolute Radiometers) (E)

WRC - Welding Research Council, absolute factor

BULLETIN 392-1994 DEVELOPING STRESS INTENSIFICATION FACTORS: I - STANDARDIZED METHOD FOR DEVELOPING STRESS INTENSIFICATION FACTORS FOR PIPING COMPONENTS ; II - EFFECTS OF WELD METAL PROFILE ON THE FATIGUE LIFE OF INTEG
BULLETIN 90-1963 A CRITICAL STUDY OF THE SOLUTIONS OF THE ASYMMETRIC BENDING OF SPHERICAL SHELLS SOLUTIONS FOR THE STRESSES AT NOZZLES IN PRESSURE VESSELS STRESS CONCENTRATION FACTORS FOR THE STRESSES AT NOZZLE INTERS

国家市场监督管理总局、中国国家标准化管理委员会, absolute factor

GB/T 20833.3-2018 Rotating electrical machines—Stator winding insulation of rotating electrical machines—Part 3: Dielectric dissipation factor measurement
GB/T 31838.6-2021 Solid insulating materials—Dielectric and resistive properties—Part 6:Dielectric properties(AC method)—Relative permittivity and dielectric dissipation factor (frequencies 0.1Hz~10MHz)

European Committee for Electrotechnical Standardization（CENELEC）, absolute factor

EN 60247:2004 Insulating liquids Measurement of relative permittivity, dielectric dissipation factor (tan $) and d.c. resistivity
EN 60034-27-3:2016 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
EN IEC 62631-2-1:2018 Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical frequencies (0@1 Hz to 10 MHz) - AC Methods

Lithuanian Standards Office , absolute factor

LST EN 60247-2004 Insulating liquids. Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity (IEC 60247:2004)

SAE - SAE International, absolute factor

SAE ARP1192B-1987 Procedure for Calibration and Verification of a Liquidborne Particle Counter: An Absolute Standard
SAE ARP1192C-2000 Procedure for Calibration and Verification of a Liquidborne Particle Counter: An Absolute Standard
SAE AS7928/4C-2015 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, INSULATED, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 150 °C TOTAL CONDUCTOR TEMPERATURE)
SAE AS7928/12D-2015 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ INSULATED@ RING TONGUE@ BELL-MOUTHED@ TIN WHISKER@ TYPE II@ CLASS 1@ (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE)
SAE AS7928/12C-2012 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ INSULATED@ RING TONGUE@ BELL-MOUTHED@ TIN WHISKER@ TYPE II@ CLASS 1@ (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE)
SAE AS7928/12A-2010 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ INSULATED@ RING TONGUE@ BELL-MOUTHED@ TIN WHISKER RESISTANT@ TYPE II@ CLASS 1@ (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE)
SAE AS7928/12B-2011 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ INSULATED@ RING TONGUE@ BELL-MOUTHED@ TIN WHISKER RESISTANT@ TYPE II@ CLASS 1@ (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE)
SAE AS7928/12-2007 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ INSULATED@ RING TONGUE@ BELL-MOUTHED@ TIN WHISKER@ TYPE II@ CLASS 1@ (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE)

Standard Association of Australia （SAA）, absolute factor

AS 1767.2.2:2008

Professional Standard - Energy, absolute factor

NB/T 42004-2013 Test method for voltage-endurance test on groundwall insulation of stator coil of high voltage AC machines
NB/T 42005-2013 Test method for thermal voltage-endurance testing on groundwall insulation of stator coil of high voltage AC machines

AGMA - American Gear Manufacturers Association, absolute factor

08FTM04-2008 The Effect of Manufacturing Microgeometry Variations on the Load Distribution Factor and on Gear Contact and Root Stresses

YU-JUS, absolute factor

JUS N.F1.200-1994 Thermal-mechanical performance test and mechanical performance test on string insulator units

工业和信息化部, absolute factor

SJ/T 11462.3-2016 Encoders for electronic equipment Part 3: Standardized absolute rotary encoders
SJ/T 11462.3.1-2016 Encoders for electronic equipment Part 3-1: Blank detailed specification for absolute rotary encoder evaluation level EZ

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., absolute factor

ASHRAE OR-10-019-2010 ASHRAE Standard 90.1 Metal Building U-Factors–Part 3: Equations for Double Layers of Fiberglass Batt Insulation in Roof and Wall Assemblies

International Organization for Standardization (ISO), absolute factor

ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 18118:2015 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO/DIS 18118:2023 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO/FDIS 18118:2023 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 20351:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) — Absolute measurement of internal quantum efficiency of phosphors for white light emitting diodes using an integrating sphere

European Telecommunications Standards Institute (ETSI), absolute factor

ETSI EG 202 848-2011 Human Factors; Inclusive eServices for all: Optimizing the accessibility and the use of upcoming user-interaction technologies (V1.1.1)

International Telecommunication Union (ITU), absolute factor

ITU-T G.992.3 AMD 3-2010 Asymmetric digital subscriber line transceivers 2 (ADSL2) Amendment 3: Scale factor for downstream transmitter referred virtual noise, and corrigenda (Study Group 15)