ZH
RU
ES

How to use electron spectroscopy

How to use electron spectroscopy, Total:500 items.

In the international standard classification, How to use electron spectroscopy involves: Analytical chemistry, Optical equipment, Optics and optical measurements, Testing of metals, Graphical symbols, Water quality, Metrology and measurement in general, Test conditions and procedures in general, Non-ferrous metals, Wastes, Audio, video and audiovisual engineering, Milk and milk products, Electrical and electronic testing, Electricity. Magnetism. Electrical and magnetic measurements, Electronic components in general, Air quality, Laundry appliances, Radiation measurements, Optoelectronics. Laser equipment, Fuels, Energy and heat transfer engineering in general, Medical equipment, Insulating materials, Nuclear energy engineering, Waxes, bituminous materials and other petroleum products, Construction materials, Tea. Coffee. Cocoa, Products of the chemical industry, Insulation, Environmental protection, Electrical engineering in general, Plastics, Wind turbine systems and other alternative sources of energy, Physics. Chemistry, Mechanical structures for electronic equipment, Photography, Paints and varnishes, Lubricants, industrial oils and related products, Soil quality. Pedology, Protection against crime, Glass, Animal feeding stuffs, Beverages, Character sets and information coding, Shipbuilding and marine structures in general, Road vehicle systems, Applications of information technology, Document imaging applications, Microprocessor systems, Fuel cells, Surface treatment and coating, Ceramics, Tyres, Radiation protection, Paper and board, Rubber, Solar energy engineering, Automatic controls for household use, Tobacco, tobacco products and related equipment, Organic chemicals, Kitchen equipment, Inorganic chemicals, Earth-moving machinery, Electromagnetic compatibility (EMC), Crude petroleum, Edible oils and fats. Oilseeds, Motor cycles and mopeds, Valves, Lamps and related equipment, Transformers. Reactors, Medical sciences and health care facilities in general, Graphic technology, Galvanic cells and batteries, Installations in buildings, Fertilizers, General methods of tests and analysis for food products, Meat, meat products and other animal produce, Fibre optic communications, Integrated circuits. Microelectronics, Linear and angular measurements, Telecommunication systems, Printed circuits and boards, Power stations in general, Insulating fluids, Semiconducting materials, Jewellery, Raw materials for rubber and plastics, Sterilization and disinfection, Electrical accessories, Aerospace electric equipment and systems.

Professional Standard - Education, How to use electron spectroscopy

JY/T 013-1996 General Rules for Electron Spectrometer Methods

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, How to use electron spectroscopy

GB/T 35158-2017 Verification method for Auger electron spectrometers(AES)
GB/T 34826-2017 Method of performance testing for quadrupole inductively coupled plasma mass spectrometer
GB 15213-2016 Medical electron accelerators—Functional performance characteristics and test methods
GB/T 32998-2016 Surface chemical analysis—Auger electron spectroscopy—Reporting of methods used for charge control and charge correction

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to use electron spectroscopy

GB/T 26533-2011 General rules for Auger electron spectroscopic analysis
GB/T 25184-2010 Verification method for X-ray photoelectron spectrometers
GB/T 19500-2004 General rules for X-ray photoelectron spectroscopic analysis method
GB/T 28893-2012 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Methods used to determine peak intensities and information required when reporting results
GB/T 32207-2015 Standard practice for use of electron-capture detectors in gas chromatography
GB/T 30702-2014 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
GB 15213-1994 Medical electron accelerators-Functional performance characteristics and test methods
GB/T 25185-2010 Surface chemical analysis.X-ray photoelectron spectroscopy.Reporting of methods used for charge control and charge correction
GB/T 20726-2015 Microbeam analysis.Selected instrumental performance parameters for the specification and checking of energy dispersive X-ray spectrometers for use in electron probe microanalysis
GB/T 17361-1998 Identification method of authigenic clay mineral in sedimentary rock by SEM & XEDS
GB/T 27582-2011 Optical functional films.Electromagnetic interference shielding film for plasma TV.Determination of shielding effectiveness
GB/T 17361-2013 Microbeam analysis.Identification of authigenic clay mineral in sedimentary rock menthod by scanning electron microscope and energy dispersive spectrometer
GB/T 20493.2-2006 Electronic imaging. Test target for the black-and-white scanning of office documents. Part 2: Method of use
GB/T 32869-2016 Nanotechnologies.Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
GB/T 31854-2015 Test method for measuring metallic impurities content in silicon materials used for photovoltaic applications by inductively coupled plasma mass spectrometry
GB/T 29849-2013 Test method for measuring surface metallic contamination of silicon materials used for photovoltaic applications by inductively coupled plasma mass spectrometry
GB/T 29851-2013 Test method for measuring boron and aluminium in silicon materials used for photovoltaic applications by secondary ion mass spectrometry

Professional Standard - Machinery, How to use electron spectroscopy

JB/T 6976-1993 Auger Electron Spectroscopy Element Identification Method
JB/T 6237.5-1992 Chemical analysis method of silver powder for electrical contacts Determination of nickel content by flame atomic absorption spectrometry
JB/T 6237.6-1992 Silver powder chemical analysis method for electrical contacts - Determination of sodium content by flame atomic absorption spectrometry
JB/T 6237.8-1992 Determination of magnesium content by flame atomic absorption spectrometry for chemical analysis of silver powder for electrical contacts
JB/T 6237.4-2008 Test methods for chemical analysis of silver powder for electric contact material. Part 4: Determination of nickel content
JB/T 6237.5-2008 Test methods for chemical analysis of silver powder for electric contact material. Part 5: Determination of natrium content
JB/T 6237.6-2008 Test methods for chemical analysis of silver powder for electric contact material. Part 6: Determination of magnesium content

British Standards Institution (BSI), How to use electron spectroscopy

BS ISO 17109:2015 Surface chemical analysis. Depth profiling. Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films
BS ISO 17109:2022 Surface chemical analysis. Depth profiling. Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter dept profiling using single and multi-layer thin…
21/30433862 DC BS ISO 17109 AMD1. Surface chemical analysis. Depth profiling. Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and…
BS EN ISO 22125-2:2019 Water quality. Technetium-99 - Test method using inductively coupled plasma mass spectrometry (ICP-MS)
BS 3727-20:1966 Methods for the analysis of nickel for use in electronic tubes and valves - Spectrographic method
BS EN 62122:2002 Methods of measurement for consumer-use digital VTRs - Electronic and mechanical performances
BS ISO 23420:2021 Microbeam analysis. Analytical electron microscopy. Method for the determination of energy resolution for electron energy loss spectrum analysis
BS ISO 11938:2012 Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
BS EN ISO 19340:2017 Water quality. Determination of dissolved perchlorate. Method using ion chromatography (IC)
BS EN ISO 13165-3:2020 Water quality. Radium-226. Test method using coprecipitation and gamma-spectrometry
PD ISO/TS 17379-2:2013 Water quality. Determination of selenium. Method using hydride generation atomic absorption spectrometry (HGAAS)
BS ISO 20903:2019 Tracked Changes. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results
20/30380369 DC BS ISO 23420. Microbeam analysis. Analytical electron microscopy. Method for the determination of energy resolution for electron energy loss spectrum analysis
BS ISO 29081:2010 Surface chemical analysis - Auger electron spectroscopy - Reporting of methods used for charge control and charge correction
23/30461294 DC BS ISO 18118. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
PD ISO/TS 17379-1:2013 Water quality. Determination of selenium. Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
BS ISO 18118:2015 Tracked Changes. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
BS ISO 20552:2007 Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
BS ISO 11938:2013 Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
BS EN ISO 12010:2019 Tracked Changes. Water quality. Determination of short-chain polychlorinated alkanes (SCCP) in water. Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)
BS EN 62321-5:2014 Determination of certain substances in electrotechnical products. Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
20/30423741 DC BS ISO 19318. Surface chemical analysis. X-ray photoelectron spectroscopy. Reporting of methods used for charge control and charge correction
BS ISO 17378-1:2014 Water quality. Determination of arsenic and antimony. Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
BS ISO 16531:2013 Surface chemical analysis. Depth profiling. Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
BS ISO 19318:2021 Tracked Changes. Surface chemical analysis. X-ray photoelectron spectroscopy. Reporting of methods used for charge control and charge correction
BS ISO 14377:2002 Canned evaporated milk - Determination of tin content - Method using graphite furnace atomic absorption spectrometry
BS ISO 18118:2005 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
18/30371766 DC BS EN ISO 22125-2. Water quality. Technetium-99. Part 2. Test method using inductively coupled plasma mass spectrometry (ICP-MS)
PD ISO/TS 9516-4:2021 Iron ores. Determination of various elements by X-ray fluorescence spectrometry. Performance-based method using fusion preparation method
BS EN ISO 6869:2001 Animal feeding stuffs. Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc. Method using atomic absorption spectrometry
BS ISO 16014-2:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. Universal calibration method
BS ISO 16796:2022 Nuclear energy. Determination of Gd₂O₃ content in gadolinium fuel blends and gadolinium fuel pellets by atomic emission spectrometry using an inductively coupled plasma source (ICP-AES)
BS EN ISO 16796:2023 Nuclear energy. Determination of Gd2O3 content in gadolinium fuel blends and gadolinium fuel pellets by atomic emission spectrometry using an inductively coupled plasma source (ICP-AES)
BS ISO 12653-2:2000 Electronic imaging - Test target for the black-and-white scanning of office documents - Method of use
BS ISO 12653-2:2001 Electronic imaging. Test target for the black-and-white scanning of office documents. Method of use
BS ISO 20280:2008 Soil quality. Determination of arsenic, antimony and selenium in aqua regia soil extracts with electrothermal or hydride-generation atomic absorption spectrometry
BS EN 62321-3-2:2014 Determination of certain substances in electrotechnical products. Screening. Total bromine in polymers and electronics by Combustion. Ion Chromatography
BS EN ISO 20714:2021 E-liquid. Determination of nicotine, propylene glycol and glycerol in liquids used in electronic nicotine delivery devices. Gas chromatographic method
PD CEN/TS 16931-7:2020 Electronic invoicing. Methodology for the development and use of EN 16931-1 compliant structured Core Invoice Usage Specifications
BS ISO 20903:2011 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results
23/30447879 DC BS EN ISO 13165-3. Water quality. Radium-226 - Part 3. Test method using coprecipitation and gamma-spectrometry
BS PD ISO/TS 13278:2017 Nanotechnologies. Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
BS DD ISO/TS 13278:2011 Nanotechnologies. Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
23/30425527 DC BS ISO 24384. Water quality. Determination of chromium(VI) and chromium(III) in water. Method using liquid chromatography with inductively coupled plasma mass spectrometry (LC-ICP-MS) after chelating pretreatment
DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
BS EN ISO 9167:2019 Tracked Changes. Rapeseed and rapeseed meals. Determination of glucosinolates content. Method using high-performance liquid chromatography
20/30415219 DC BS ISO 16796. Nuclear energy. Determination of Gd2O3 content in gadolinium fuel blends and gadolinium fuel pellets by atomic emission spectrometry using an inductively coupled plasma source (ICP-AES)
BS ISO 23280:2022 Electrically propelled mopeds and motorcycles. Test method for evaluation of energy performance using motor dynamometer
BS ISO 11916-2:2013 Soil quality. Determination of selected explosives and related compounds. Method using gas chromatography (GC) with electron capture detection (ECD) or mass spectrometric detection (MS)
BS EN ISO 18589-3:2017 Measurement of radioactivity in the environment. Soil. Test method of gamma-emitting radionuclides using gamma-ray spectrometry
BS ISO 18554:2016 Surface chemical analysis. Electron spectroscopies. Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
BS DD ENV 14226:2002 Advanced technical ceramics - Test methods for ceramic powders - Determination of calcium, magnesium, iron and aluminium in silicon nitride by using flame atomic absorption spectroscopy (FAAS) or inductively coupled plasma atomic emission spectroscopy (IC
BS EN 17294:2019 Animal feeding stuffs. Methods of sampling and analysis. Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD)
BS 7334-8:1992 Measuring instruments for building construction. Methods for determining accuracy in use of electronic distance-measuring instruments up to 150 m
BS EN ISO 19014-3:2018 Earth-moving machinery. Functional safety. Environmental performance and test requirements of electronic and electrical components used in safety-related parts of the control system
PD IEC TR 63211-2-12:2020 Durability test methods for electronic displays. Environmental tests. Environmental conditions of use, storage and transportation of electronic displays
BS 6043-2.3:1997 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of trace elements in green and calcined coke by flame atomic absorption spectroscopy
BS ISO 15096:2020 Tracked Changes. Jewellery and precious metals. Determination of high purity silver. Difference method using ICP-OES
BS ISO 15096:2008 Jewellery - Determination of silver in 999 0/00 silver jewellery alloys - Difference method using inductively coupled plasma optical emission spectroscopy (ICP-OES)
BS ISO 15096:2014 Jewellery. Determination of silver in 999 0/00 silver jewellery alloys. Difference method using ICP-OES
BS EN IEC 61010-2-061:2021 Tracked Changes. Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
18/30325475 DC BS ISO 18589-4. Measurement of radioactivity in the environment. Soil. Part 4. Plutonium 238 and plutonium 239 + 240. Test method using alpha spectrometry

International Organization for Standardization (ISO), How to use electron spectroscopy

ISO 17109:2015 Surface chemical analysis - Depth profiling - Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films
ISO 16129:2018 Surface chemical analysis — X-ray photoelectron spectroscopy — Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
ISO 23420:2021 Microbeam analysis — Analytical electron microscopy — Method for the determination of energy resolution for electron energy loss spectrum analysis
ISO 17109:2022 Surface chemical analysis — Depth profiling — Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth p
ISO 20903:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results
ISO/DIS 18118:2023 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO/FDIS 18118:2023 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 29081:2010 Surface chemical analysis - Auger electron spectroscopy - Reporting of methods used for charge control and charge correction
ISO/DIS 13165-3 Water quality — Radium-226 — Part 3: Test method using coprecipitation and gamma-spectrometry
ISO/DIS 23548:2011 Measurement of radioactivity — Alpha emitting radionuclides — Generic test method using alpha spectrometry
ISO 20903:2019 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Methods used to determine peak intensities and information required when reporting results
ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 18118:2015 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 12846:2012 Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment
ISO 16531:2013 Surface chemical analysis - Depth profiling - Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
ISO 11938:2012 Microbeam analysis - Electron probe microanalysis - Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
ISO 16796:2022 Nuclear energy — Determination of Gd2O3 content in gadolinium fuel blends and gadolinium fuel pellets by atomic emission spectrometry using an inductively coupled plasma source (ICP-AES)
ISO 24639:2022 Microbeam analysis — Analytical electron microscopy — Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
ISO/TS 16965:2013 Soil quality.Determination of trace elements using inductively coupled plasma mass spectrometry (ICP-MS)
ISO 14377:2002 Canned evaporated milk - Determination of tin content - Method using graphite furnace atomic absorption spectrometry
ISO 14377:2002|IDF 168:2002 Determination of tin content in canned skim milk using graphite furnace atomic absorption spectrometry method
ISO/CD 16965:2023 Environmental solid matrices — Determination of trace elements using inductively coupled plasma mass spectrometry (ICP-MS)
ISO/FDIS 22036:2023 Environmental solid matrices — Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES)
ISO 11292:1995 Instant coffee - Determination of free and total carbohydrate contents - Method using high-performance anion-exchange chromatography
ISO 11916-2:2013 Soil quality.Determination of selected explosives and related compounds.Part 2: Method using gas chromatography (GC) with electron capture detection (ECD) or mass spectrometric detection (MS)
ISO 23812:2009 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth calibration for silicon using multiple delta-layer reference materials
ISO 23280:2022 Electrically propelled mopeds and motorcycles — Test method for evaluation of energy performance using motor dynamometer
ISO 20903:2011 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results
ISO 12653-2:2000 Electronic imaging - Test target for the black-and-white scanning of office documents - Part 2: Method of use
ISO/CD 5861 Surface chemical analysis — X-ray photoelectron spectroscopy — Method of intensity calibration for quartz-crystal monochromated Al Kα XPS instruments
ISO/DIS 5861:2023 Surface chemical analysis — X-ray photoelectron spectroscopy — Method of intensity calibration for quartz-crystal monochromated Al Kα XPS instruments
ISO 18554:2016 Surface chemical analysis - Electron spectroscopies - Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy

Association Francaise de Normalisation, How to use electron spectroscopy

NF X21-058:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results.
NF C97-120*NF EN 62122:2004 Methods of measurement for consumer-use digital VTRs - Electronic and mechanical performances.
NF A08-300:1989 Steel and Iron - Recommendations for the preparation and the use of standard method of analysis using flame atomic absorption spectrometry
NF ISO 29081:2010 Analyse chimique des surfaces - Spectroscopie d'électrons Auger - Indication des méthodes mises en oeuvre pour le contrôle et la correction de la charge
NF X21-071:2011 Surface Chemical Analysis - X-ray photoelectron Spectroscopy - Guidelines for analysis.
NF T90-144*NF EN ISO 12846:2012 Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment.
NF EN ISO 11206:2013 Qualité de l'eau - Détermination du bromate dissous - Méthode utilisant la chromatographie ionique (IC) et la réaction post-colonne (PCR)
NF ISO 11938:2012 Analyse par microfaisceaux - Analyse par microsonde électronique (microsonde de Castaing) - Méthodes d'analyse par cartographie élémentaire en utilisant la spectrométrie à dispersion de longueur d'onde
FD T16-203:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
NF C05-100-5*NF EN 62321-5:2014 Determination of certain substances in electrotechnical products - Part 5 : cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
NF X21-068*NF ISO 29081:2010 Surface chemical analysis - Auger electron spectroscopy - Reporting of methods used for charge control and charge correction
CWA 14365-1:2004 Guide on the Use of Electronic Signatures - Part 1 : Legal and Technical Aspects
NF M60-461*NF ISO 16796:2022 Nuclear energy - Determination of Gd2O3 content in gadolinium fuel blends and gadolinium fuel pellets by atomic emission spectrometry using an inductively coupled plasma source (ICP-AES)
FD A08-300:2021 Analyse chimique des aciers et des fontes - Elaboration et emploi de méthodes d'analyse par spectrométrie d'absorption atomique dans la flamme
NF ISO 16525-2:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 2 : détermination des propriétés électriques pour utilisation dans des assemblages électroniques
NF EN 62490-1:2011 Méthode de mesure de l'ESL - Partie 1 : condensateurs à bornes de sortie utilisés dans les équipements électroniques
NF T90-482*NF EN ISO 18635:2017 Water quality - Determination of short-chain polychlorinated alkanes (SCCPs) in sediment, sewage sludge and suspended (particulate) matter - Method using gas chromatography-mass spectrometry (GC-MS) and electron capture negative ionization (ECNI)
NF C90-403-2:1997 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES). PART 3-2 : ASPECTS OF APPLICATION. USER PROCESS. (EUROPEAN STANDARD EN 50 090-3-2).
NF D90-303*NF EN ISO 20714:2021 E-liquid - Determination of nicotine, propylene glycol and glycerol in liquids used in electronic nicotine delivery devices - Gas chromatographic method
NF T60-106:2001 Produits pétroliers liquides - Détermination des éléments d'additivation, d'usure et de contamination dans les huiles lubrifiantes neuves et usagées - Méthode par spectrométrie d'émission atomique à couplage inductif par plasma (ICP/AES)
NF EN 62490-2:2011 Méthode de mesure de l'ESL - Partie 2 : condensateurs pour montage en surface utilisés dans les équipements électroniques
NF EN IEC 63136:2019 Lave-vaisselle électriques à usage collectif - Méthodes d'essai et de mesure de l'aptitude à la fonction
NF EN 15550:2017 Aliments des animaux - Méthodes d'échantillonnage et d'analyse - Dosage du cadmium et du plomb par spectrométrie d'absorption atomique à l'aide d'un four graphite après minéralisation sous pression
NF EN IEC 61007:2020 Transformateurs et inductances utilisés dans les équipements électroniques et de télécommunications - Méthodes de mesure et procédures d'essais
NF ISO 11916-2:2013 Qualité du sol - Dosage d'une sélection d'explosifs de composés apparentés - Partie 2 : méthode utilisant la chromatographie en phase gazeuse (CG) avec détection à capture d'électrons (DCE) ou détection par spectrométrie de masse (SM)
NF V18-217*NF EN 17294:2019 Animal feeding stuffs - Methods of sampling and analysis - Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD)
NF EN 17294:2019 Aliments des animaux - Méthodes d'échantillonnage et d'analyse - Dosage des acides organiques par chromatographie ionique avec détection conductimétrique (CI-DC)
NF ISO 23812:2009 Analyse chimique des surfaces - Spectrométrie de masse des ions secondaires - Méthode pour l'étalonnage de la profondeur pour le silicium à l'aide de matériaux de référence à couches delta multiples
XP T16-207*XP ISO/TS 13278:2018 Nanotechnologies - Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
NF C05-100-3-2*NF EN 62321-3-2:2014 Determination of certain substances in electrotechnical products - Part 3-2 : screening - Total bromine in polymers and electronics by Combustion - Ion Chromatography
NF X31-042*NF EN 16171:2016 Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS)
NF ISO 5724:2023 Joaillerie, bijouterie et métaux précieux - Dosage de l'or de très haute pureté - Méthode par différence utilisant la spectrométrie de masse à plasma à couplage inductif (ICP-MS)
NF EN ISO 19581:2020 Mesurage de la radioactivité - Radionucléides émetteurs gamma - Méthode d'essai de dépistage par spectrométrie gamma utilisant des détecteurs par scintillation
NF ISO 16796:2022 Énergie nucléaire - Dosage de Gd2O3 dans des mélanges de poudres et dans des pastilles combustibles au gadolinium par spectrométrie par émission atomique à plasma à couplage inductif (ICP-AES)
NF EN 61189-6:2008 Méthodes d'essais pour les matériaux électriques, les structures d'interconnexion et les ensembles - Partie 6 : méthodes d'essais pour les matériaux utilisés dans la fabrication des assemblages électroniques
NF X31-404-2*NF ISO 11916-2:2013 Soil quality - Determination of selected explosives and related compounds - Part 2 : method using gas chromatography (GC) with electron capture detection (ECD) or mass spectrometric detection (MS)

Indonesia Standards, How to use electron spectroscopy

SNI 19-6659-2002 Safety marking - Electrical usages
SNI ASTM D7303:2011 Standard test methode for determination of metals in lubricating greases by Inductively Coupled Plasma Atomic Emission Spectrometry

Korean Agency for Technology and Standards (KATS), How to use electron spectroscopy

KS I ISO 17852-2011(2016) Water quality — Determination of mercury — Method using atomic fluorescence spectrometry
KS D ISO 18118-2005(2020) Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of h
KS C IEC 62122:2011 Methods of measurement for consumer-use digital VTRs－Electronic and mechanical performances
KS H ISO 9874-2006(2016) Milk -- Determination of total phosphorus content -- Method using molecular absorption spectrometry
KS D ISO 18118:2005 Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
KS D ISO 19318-2005(2020) Surface chemical analysis－X-ray photoelectron spectroscopy－Reporting of methods used for charge control and charge correction
KS M 1076-2008 Ink in electrotechnical products－Determination of lead and cadmium－Atomic spectrometry
KS I ISO 20552-2010(2016) Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
KS F 2587-2010(2020) Standard test method for chloride ion in fresh concrete using a chloride ion-selective electrode method
KS I 0022-2011 Calculation method of the recyclability and recoverability rate for electrical and electronic equipment
KS D 1673-2007(2017) Methods for inductively coupled plasma emission spectrochemical analysis of steel
KS C IEC 62122-2011(2016) Methods of measurement for consumer-use digital VTRs－Electronic and mechanical performances
KS B 5407-1979(2003) METHOD FOR MEASURING THE PERFORMANCE OF PHOTOGRAPHIC ELECTRONIC FLASH EQUIPMENTS
KS C IEC 62122-2011(2021) Methods of measurement for consumer-use digital VTRs－Electronic and mechanical performances
KS H ISO 11292:2007 Instant coffee－Determination of free and total carbohydrate contents－Method using high-performance anion-exchange chromatography
KS M 1081-2008 Ceramic fuse in electrotechnical products－Determination of lead and cadmium－Atomic spectrometry
KS B ISO 15998-2014(2019) Earth-moving machinery — Machine control systems(MCS) using electronic components — Performance criteria and tests for functional safety
KS X ISO 12653-2-2007(2022) Electronic imaging－Test target for the black-and-white scanning of office documents－Part 2：Method of use
KS X ISO 12653-2-2007(2017) Electronic imaging－Test target for the black-and-white scanning of office documents－Part 2：Method of use
KS X ISO 12653-2:2007 Electronic imaging-Test target for the black-and-white scanning of office documents-Part 2:Method of use
KS B ISO 15998:2012 Earth-moving machinery-Machine-control systems(MCS) using electronic components-Performance criteria and tests for functional safety
KS B ISO 15998:2014 Earth-moving machinery — Machine control systems(MCS) using electronic components — Performance criteria and tests for functional safety
KS C IEC 61189-6:2009 Test methods for electrical materials, interconnection structures and assemblies-Part 6:Test methods for materials used in manufacturing electronic assemblies
KS C CISPR 19-2004 Electromagnetic compatibility(EMC)- Guidance on the use of the substitution method for measurement of radiation from microwave ovens for frequencies above 1 GHz
KS B 6546-2017 Earth-moving machinery — Electro-hydraulic proportional pressure reducing valves used in hydraulic pumps applied in excavators — Performance testing methods

German Institute for Standardization, How to use electron spectroscopy

DIN EN ISO 17852:2008-04 Water quality - Determination of mercury - Method using atomic fluorescence spectrometry (ISO 17852:2006); German version EN ISO 17852:2008
DIN EN ISO 19340:2019-01 Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC) (ISO 19340:2017); German version EN ISO 19340:2017
DIN EN ISO 22125-2:2019-10 Water quality - Technetium-99 - Part 2: Test method using inductively coupled plasma mass spectrometry (ICP-MS) (ISO/FDIS 22125-2:2019); German and English version FprEN ISO 22125-2:2019 / Note: Date of issue 2019-08-30
DIN EN 60456/A11:2008 Clothes washing machines for household use - Methods for measuring the performance; German version EN 60456:2005/A11:2006
DIN EN ISO 12010:2019-09 Water quality - Determination of short-chain polychlorinated alkanes (SCCP) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI) (ISO 12010:2019); German version EN ISO 12010:2019
DIN EN ISO 19340:2019 Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC) (ISO 19340:2017)
DIN EN ISO 13165-3:2020-12 Water quality - Radium-226 - Part 3: Test method using coprecipitation and gamma-spectrometry (ISO 13165-3:2016); German version EN ISO 13165-3:2020
DIN EN ISO 12010:2019 Water quality - Determination of short-chain polychlorinated alkanes (SCCP) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI) (ISO 12010:2019)
DIN EN ISO 22125-2:2019 Water quality - Technetium-99 - Part 2: Test method using inductively coupled plasma mass spectrometry (ICP-MS) (ISO/FDIS 22125-2:2019); German and English version FprEN ISO 22125-2:2019
DIN EN ISO 12846:2012-08 Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846:2012); German version EN ISO 12846:2012
DIN EN ISO 11543:2002-06 Modified starch - Determination of hydroxypropyl content - Method using proton nuclear magnetic resonance (NMR) spectrometry (ISO 11543:2000); German version EN ISO 11543:2002
DIN 38413-6:2007 German standard methods for the examination of water, waste water and sludge - Single components (group P) - Part 6: Determination of acrylamide - Methode using high performance liquid chromatography with mass spectrometric detection (HPLC-MS/MS) (P 6)
DIN 38406-18:1990-05 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of dissolved silver by atomic absorption spectrometry using electrothermal atomization (E 18)
DIN EN ISO 11206:2013-05 Water quality - Determination of dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR) (ISO 11206:2011); German version EN ISO 11206:2013
DIN EN ISO 6869:2001-03 Animal feeding stuffs - Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc - Method using atomic absorption spectrometry (ISO 6869:2000); German version EN ISO 6869:2000
DIN 38406-26:1997-07 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 26: Determination of thallium by atomic absorption spectrometry (AAS) using electrothermal atomisation (E 26)
DIN EN 50242 DIN EN 60436:2008 Electric dishwashers for household use - Methods for measuring the performance (IEC 60436:2004, modified); German version EN 50242/EN 60436:2008
DIN EN ISO 13165-3:2023-04 Water quality - Radium-226 - Part 3: Test method using coprecipitation and gamma-spectrometry (ISO/DIS 13165-3:2023); German and English version prEN ISO 13165-3:2023 / Note: Date of issue 2023-03-10*Intended as replacement for DIN EN ISO 13165-3 (2020...
DIN EN 62321-5:2014 Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS (IEC 62321-5:2013); German version EN 62321-5:2014
DIN 3230-6:1987 Technical delivery conditions for valves; requirements and methods of test for valves for use with flammable liquids
DIN ISO 11916-2:2014-11 Soil quality - Determination of selected explosives and related compounds - Part 2: Method using gas chromatography (GC) with electron capture detection (ECD) or mass spectrometric detection (MS) (ISO 11916-2:2013)
DIN EN ISO 20714:2022-04 E-liquid - Determination of nicotine, propylene glycol and glycerol in liquids used in electronic nicotine delivery devices - Gas chromatographic method (ISO 20714:2019); German version EN ISO 20714:2021
DIN 38406-8:2004-10 German standard methods for examination of water, waste water and sludge - Cations (group E) - Part 8: Determination of zinc - Method by atomic absorption spectrometry (AAS) using an air-ethine flame (E 8)
DIN 38406-14:1992-07 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of sodium by atomic absorption spectrometry (ASS) using an air-acetylene flame (E 14)
DIN 38406-13:1992-07 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of potassium by atomic absorption spectrometry (AAS) using an air-acetylene flame (E 13)
DIN 6802-6:2013-01 Neutron dosimetry - Part 6: Methods for determination of absorbed dose using ionisation chambers
DIN EN 301039:2003 Private Integrated Services Network (PISN) - Mapping functions for the employment of 64 kbit/s circuit mode connections with 16 kbit/s sub-multiplexing (ISO/IEC 17310 (2002), modified) (Endorsement of the English version EN 301039 V 1.2.1 (2002-09) as Ger
DIN CEN/TS 16931-7:2020-08 Electronic invoicing - Part 7: Methodology for the development and use of EN 16931-1 compliant structured Core Invoice Usage Specifications; German version CEN/TS 16931-7:2020
DIN EN ISO 22036:2022-07 Soil, treated biowaste and sludge - Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO/DIS 22036:2022); German and English version prEN ISO 22036:2022 / Note: Date of issue 2022-06-03*Intended as rep...
DIN EN 16171:2017-01 Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS); German version EN 16171:2016
DIN EN IEC 63002:2022-08 Interoperability specifications and communication method for external power supplies used with computing and consumer electronics devices (IEC 63002:2021); English version EN IEC 63002:2021 / Note: DIN EN 63002 (2018-01) remains valid alongside this st...
DIN V ENV 14226:2002 Advanced technical ceramics - Test methods for ceramic powders - Determination of calcium, magnesium, iron and aluminium in silicon nitride by using flame atomic absorption spectroscopy (FAAS) or inductively coupled plasma atomic emission spectroscopy (IC
DIN EN ISO 16796:2023 Nuclear energy - Determination of GdO content in gadolinium fuel blends and gadolinium fuel pellets by atomic emission spectrometry using an inductively coupled plasma source (ICP-AES) (ISO 16796:2022); English version prEN ISO 16796:2023

Group Standards of the People's Republic of China, How to use electron spectroscopy

T/CAIA YQ004-2018 Performance testing method for liquid chromatograph coupled with atomic fluorescence spectrometer
T/CSTM 00962-2022 Evaluation method for spectrometer performance of spark discharge atomic emission
T/ZSA 39-2020 Characterization of Graphene - Work function - Ultraviolet photoelectron spectroscopy (UPS) method
T/ZGIA 002-2020 Graphene Test Methods Determination of Work Function Ultraviolet Photoelectron Spectroscopy
T/CAIA YQ003-2016 Testing Methods for Optical/Electrical Characteristics of Linear Charge Coupled Imaging Device for Spectrometer
T/CEC 170-2018 Lithium-ion battery explosion test method for electric energy storage
T/CEC 169-2018 Internal short circuit test method of lithium ion battery for electric energy storage
T/CEC 371-2020 Evaluation method of flue gas toxicity of lithium-ion batteries for power energy storage
T/CEC 172-2018 Safety requirements and test methods for lithium-ion batteries for power storage
T/CANSI 26-2022 Electrical ship’s lithium-ion traction battery pack electrical performance test methods
T/CAIA YQ007-2021 General test method for photoelectric performance of electron multiplying charge coupled imaging device
T/CAAMTB 25-2021 Motor performance requirements and test methods for electronic parking brake system of passenger vehicles
T/CEC 678-2022 Safety requirements and test methods for solid-state lithium-ion batteries for power storage
T/CES 176-2022 Evaluation method for lifetime of stationary proton exchange membrane fuel cell stack
T/GDCKCJH 056-2022 Technical performance and test method of high temperature ternary polymer lithium-ion power battery for special vehicle
T/ZZAS 002-2018 Performance requirements and test methods of lithium-ion battery packs for automatic guided vehicles
T/CEC 171-2018 Lithium-ion battery cycle life requirements and rapid detection test methods for power energy storage

American Society for Testing and Materials (ASTM), How to use electron spectroscopy

ASTM C110-08 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
ASTM C110-09 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
ASTM C1109-98 Standard Test Method for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectrometry
ASTM C1109-10(2015) Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM E2994-21 Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)
ASTM E3061-17 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method)
ASTM E2594-09 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)
ASTM D5542-94(1999)e1 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM E1999-11 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
ASTM D5673-15 Standard Test Method for Elements in Water by Inductively Coupled Plasma&x2014;Mass Spectrometry
ASTM D5673-16 Standard Test Method for Elements in Water by Inductively Coupled Plasma&x2014;Mass Spectrometry
ASTM E2994-16 Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)
ASTM E2594-20 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based)
ASTM D5739-06(2013) Standard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry
ASTM D7439-14 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasmandash;Mass Spectrometry
ASTM D6357-19 Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively
ASTM D6357-21 Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively
ASTM E697-96(2006) Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography
ASTM E697-96 Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography
ASTM E697-96(2001) Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography
ASTM E697-96(2011) Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography
ASTM E2371-13 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
ASTM E1552-08 Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys By Direct Current Plasmax2014;Atomic Emission Spectrometry
ASTM D1000-17 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
ASTM E944-19 Standard Guide for Application of Neutron Spectrum Adjustment Methods in Reactor Surveillance
ASTM E944-13e1 Standard Guide for Application of Neutron Spectrum Adjustment Methods in Reactor Surveillance
ASTM D5987-96(2015) Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
ASTM D1782-17 Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
ASTM D1782-95(2007) Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
ASTM D1782-95(2001) Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
ASTM D1782-95(2009) Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
ASTM D4628-23 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
ASTM E984-06 Standard Guide for Identifying Chemical Effects and Matrix Effects in Auger Electron Spectroscopy
ASTM F1710-97 Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
ASTM F1710-97(2002) Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
ASTM D3087-91(1998) Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal
ASTM D3087-91(2009) Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal
ASTM E280-98(2004)e1 Standard Reference Radiographs for Heavy-Walled (4 &189; to 12-in. [114 to 305-mm]) Steel Castings
ASTM E280-21 Standard Reference Radiographs for Heavy-Walled (412 to 12 in. (114 to 305 mm)) Steel Castings
ASTM E2809-22 Standard Guide for Using Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy (SEM/EDS) in Forensic Polymer Examinations
ASTM D3335-85a(2014) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM F1593-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
ASTM F1710-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
ASTM E2809-13 Standard Guide for Using Scanning Electron Microscopy/X-Ray Spectrometry in Forensic Paint Examinations
ASTM D1976-07 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
ASTM D5185-13 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry lpar;ICP-AESrpar;
ASTM E2330-12 Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons
ASTM E1552-93(2002) Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys Using the D-C Argon Plasma Spectrometer
ASTM E1552-15 Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys By Direct Current Plasma—Atomic Emission Spectrometry
ASTM D3593-80(1986)e1 Test Method for Molecular Weight Averages and Molecular Weight Distribution of Certain Polymers by Liquid Size-Exclusion Chromatography (Gel Permeation Chromatography GPC) Using Universal Calibration
ASTM C1109-04 Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectrometry
ASTM E984-12 Standard Guide for Identifying Chemical Effects and Matrix Effects in Auger Electron Spectroscopy
ASTM E2823-17 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based)
ASTM D1976-19 Standard Test Method for Elements in Water by Inductively-Coupled Plasma Atomic Emission Spectroscopy
ASTM D1976-18 Standard Test Method for Elements in Water by Inductively-Coupled Plasma Atomic Emission Spectroscopy
ASTM D1976-20 Standard Test Method for Elements in Water by Inductively-Coupled Plasma Atomic Emission Spectroscopy
ASTM D6595-17 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM D5184-22 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM E2823-11 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based Method)
ASTM D5185-13e1 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry 40;ICP-AES41;
ASTM D6357-21a Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively
ASTM D6357-21b Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively
ASTM E1250-15(2020) Standard Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of Silicon Electronic Devices
ASTM E1250-10 Standard Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of Silicon Electronic Devices
ASTM F326-96(2001)e1 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement from Cadmium-Electroplating Processes
ASTM F326-96(2001)e2 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement from Cadmium-Electroplating Processes
ASTM E2330-19 Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons
ASTM D528-97(2007) Standard Test Method for Machine Direction of Paper and Paperboard
ASTM D5289-95(2001) Standard Test Method for Rubber Property8212;Vulcanization Using Rotorless Cure Meters
ASTM D5289-19 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D5289-95 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D5289-19a Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM C1109-10 Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectrometry
ASTM D7040-04(2010) Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM E1036-15 Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells
ASTM E1036-08 Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells
ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM D8214-18 Standard Test Method for Forms of Sulfur in Coal by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D7303-23 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D5185-18 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma At
ASTM D8234-19 Standard Test Method for Anions in High Ionic Water by Ion Chromatography using Tandem Suppressed Conductivity and UV Detection
ASTM E3284-23 Standard Practice for Training in the Forensic Examination of Primer Gunshot Residue (pGSR) Using Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry (SEM/EDS)
ASTM D4517-85(1999) Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
ASTM D4517-15 Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
ASTM E2371-21 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
ASTM E2371-21a Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
ASTM E1036-02(2007) Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells
ASTM E1036-02 Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells
ASTM E1036-12 Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells
ASTM C1111-10(2015) Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D6728-11 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM D7773-19 Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3) Using Filter Sampling and Suppressed Ion Chromatography
ASTM D6785-20 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM D5863-00a(2016) Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
ASTM F2617-08 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
ASTM E948-05a Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM E948-15 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM D5708-15 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
ASTM C1287-95(2001) Standard Test Method for Determination of Impurities in Uranium Dioxide by Inductively Coupled Plasma Mass Spectrometry
ASTM D7439-08 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasmax2013;Mass Spectrometry
ASTM E1588-07e1 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-ray Spectrometry
ASTM E1588-07 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM D4951-06 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D4951-14(2019) Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM F1318-90(2003) Standard Test Method for Determination of Productivity Using Electrostatic Copy Machines with Various Configurations
ASTM E2927-16 Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons
ASTM E2927-16e1 Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons
ASTM D7423-09(2014) Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
ASTM D7691-23 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D7691-11e1 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry 40;ICP-AES41;
ASTM D7691-16 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM F3139-15(2023) Standard Test Method for Analysis of Tin-Based Solder Alloys for Minor and Trace Elements Using Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM E1588-95(2001) Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy-Dispersive Spectroscopy
ASTM E1588-08 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E1588-10 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E1588-95 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy-Dispersive Spectroscopy
ASTM D7439-21 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
ASTM E1855-10 Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors
ASTM D6508-15 Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
ASTM UOP407-09 Trace Metals in Organics by Dry Ashing - ICP-OES
ASTM D5837-15 Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High-Performance Liquid Chromatography (HPLC)
ASTM E385-90(2002) Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique
ASTM F2617-15 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
ASTM C1845-16 Standard Practice for The Separation of Lanthanide Elements from Uranium Matrices Using High Pressure Ion Chromatography (HPIC) for Isotopic Analyses by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
ASTM D8086-20 Standard Test Method for Determination of Methanol and Ethanol in Electrical Insulating Liquids of Petroleum Origin by Headspace (HS)-Gas Chromatography (GC) Using Mass Spectrometry (MS) or Flame Ioni
ASTM E1125-16(2020) Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
ASTM E1855-20 Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors
ASTM D6357-11 Test Methods for Determination of Trace Elements in Coal, Coke, & Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry
ASTM D3849-14a Standard Test Method for Carbon Black—Morphological Characterization of Carbon Black Using Electron Microscopy
ASTM F1318-90(1998) Standard Test Method for Determination of Productivity Using Electrostatic Copy Machines with Various Configurations
ASTM F1318-90(2009) Standard Test Method for Determination of Productivity Using Electrostatic Copy Machines with Various Configurations
ASTM F677-95(1999) Standard Test Method for Fluid and Grease Resistance of Thermoset Encapsulating Compounds Used in Electronic and Microelectronic Applications
ASTM F677-04 Standard Test Method for Fluid and Grease Resistance of Thermoset Encapsulating Compounds Used in Electronic and Microelectronic Applications
ASTM F677-04(2009) Standard Test Method for Fluid and Grease Resistance of Thermoset Encapsulating Compounds Used in Electronic and Microelectronic Applications
ASTM F677-13 Standard Test Method for Fluid and Grease Resistance of Thermoset Encapsulating Compounds Used in Electronic and Microelectronic Applications
ASTM D4128-06 Standard Guide for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry
ASTM D4128-94 Standard Practice for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry
ASTM E1855-04 Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors
ASTM E1855-04e1 Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors
ASTM D7040-04 Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D8186-18 Standard Test Method for Measurement of Impurities in Graphite by Electrothermal Vaporization Inductively Coupled Plasma Optical Emission Spectrometry (ETV-ICP OES)
ASTM E948-05 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM E948-16(2020) Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM E948-16 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM E948-09 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight

International Electrotechnical Commission (IEC), How to use electron spectroscopy

IEC 62122:2002 Methods of measurement for consumer-use digital VTRs - Electronic and mechanical performances
IEC PAS 62587:2008 Method for measuring performance of portable household electric room air cleaners
ISO/TS 13278:2011 Nanotechnologies - Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
ISO TS 13278:2011 Nanotechnologies - Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
IEC 61189-6:2006 Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in electronic assemblies
IEC TS 62607-5-4:2022 Nanomanufacturing - Key control characteristics - Part 5-4: Energy band gap measurement of nanomaterials by electron energy loss spectroscopy (EELS)

国家市场监督管理总局、中国国家标准化管理委员会, How to use electron spectroscopy

GB/T 41064-2021 Surface chemical analysis—Depth profiling—Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films
GB/T 40231-2021 Restricted substance in electrical and electronic products—Determination of hexavalent chromium—Ion chromatography method
GB/T 38914-2020 Evaluation method for lifetime of proton exchange membrane fuel cell stack in vehicle application
GB/T 37253-2018 Test method for ionic conductivity of functional ceramics for oxygen sensor
GB/T 6609.1-2018 Chemical analysis methods and determination of physical performance of alumina—Part 1：Determination of trace elements content—Inductively coupled plasma atomic emission spectrometry method
GB/T 38185-2019 Performance requirements and testing methods for electronic stability control system(ESC) for commercial vehicles

ES-UNE, How to use electron spectroscopy

UNE-EN ISO 19340:2018 Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC) (ISO 19340:2017)
UNE-EN ISO 22125-2:2019 Water quality - Technetium-99 - Part 2: Test method using inductively coupled plasma mass spectrometry (ICP-MS) (ISO 22125-2:2019) (Endorsed by Asociación Española de Normalización in January of 2020.)
UNE-EN ISO 12010:2020 Water quality - Determination of short-chain polychlorinated alkanes (SCCP) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI) (ISO 12010:2019)
UNE-EN ISO 13165-3:2020 Water quality - Radium-226 - Part 3: Test method using coprecipitation and gamma-spectrometry (ISO 13165-3:2016) (Endorsed by Asociación Española de Normalización in March of 2020.)
UNE-EN ISO 20714:2022 E-liquid - Determination of nicotine, propylene glycol and glycerol in liquids used in electronic nicotine delivery devices - Gas chromatographic method (ISO 20714:2019)
UNE-EN 17294:2020 Animal feeding stuffs - Methods of sampling and analysis - Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD)
UNE-CEN/TS 16931-7:2020 Electronic invoicing - Part 7: Methodology for the development and use of EN 16931-1 compliant structured Core Invoice Usage Specifications (Endorsed by Asociación Española de Normalización in July of 2020.)
UNE-EN 3475-702:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 702: Screen pushback capability (Endorsed by AENOR in April of 2002.)

Standard Association of Australia （SAA）, How to use electron spectroscopy

AS ISO 18118:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
AS/NZS 4879.1:2008 Performance of transformers and electronic step-down convertors for ELV lamps - Test method - Energy performance

Professional Standard - Electron, How to use electron spectroscopy

SJ/T 10714-1996 Standard practice for checking the operation characteristics of X-ray photoelectron spectrometers
SJ/T 11512-2015 Test methods of electronic pastes for integrated circuit performent
SJ 3227-1989 Test methods for properties parameters of thermal tubes for use in electronic equipment
SJ/T 10553-2021 Method of emission specthchemical analysis of impurities in ZrO2 for use in electron ceramics
SJ/T 10552-2021 Method of emission specthchemical analysis of impurities in TiO2 for use in electron ceramics
SJ/T 10552-1994 Method of emission specthochemical analysis of impurities in TiO2 for use in electron ceramics
SJ/T 10553-1994 Method of emission spectrochemical analysis of impurities in ZrO2 for use in electron ceramics
SJ/T 11090-1996 Properties and test methods for antistatic silk fabric of synthetic filament in electronic industry
SJ/T 10551-1994 Method of emission spectrochemical analysis of impurities in AL203 for use in electron ceramics
SJ/T 10551-2021 The measurement of emission spectrum analysis for aluminium oxide used in electronic ceramics

European Committee for Electrotechnical Standardization（CENELEC）, How to use electron spectroscopy

EN 62122:2002 Methods of Measurement for Consumer-Use Digital VTRs - Electronic and Mechanical Performances

Lithuanian Standards Office , How to use electron spectroscopy

LST EN 62122-2003 Methods of measurement for consumer-use digital VTRs. Electronic and mechanical performances (IEC 62122:2002)
LST EN 62321-5-2014 Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS (IEC 62321-5:2013)
LST EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection (ISO 16014-5:2012)
LST EN ISO 12846:2012 Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846:2012)
LST EN ISO 14911:2000 Water quality - Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography - Method for water and waste water (ISO 14911:1998)
LST EN 15308-2008 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection
LST EN 3475-702-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 702: Screen pushback capability

Japanese Industrial Standards Committee (JISC), How to use electron spectroscopy

JIS K 0167:2011 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
JIS B 7093:1976 Method for measuring the performance of photographic electronic flash equipments
JIS K 0156:2018 Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth calibration for silicon using multiple delta-layer reference materials
JIS C 9901:2000 Method of calculation and representation of energy efficiency standard achievement percentage of household electrical and electronic appliances

Danish Standards Foundation, How to use electron spectroscopy

DS/ISO 12010:2012 Water quality - Determination of short-chain polychlorinated alkanes (SCCPs) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)
DS/EN ISO 11206:2013 Water quality - Determination of dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR)
DS/EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection
DS/ISO/TS 10798:2011 Nanotechnologies - Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
DS/ISO/TS 16965:2013 Soil quality - Determination of trace elements using inductively coupled plasma mass spectrometry (ICP-MS)
DS/EN ISO 12846:2012 Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment
DS/CWA 14365-1:2004 Guide on the Use of Electronic Signatures - Part 1: Legal and Technical Aspects
DS/EN 62122:2002 Methods of measurement for consumer-use digital VTRs - Electronic and mechanical performances
DS/ISO 20042:2021 Measurement of radioactivity – Gamma-ray emitting radionuclides – Generic test method using gamma-ray spectrometry
DS/EN ISO 14911:2000 Water quality - Determination of dissolved Li+,Na+,NH4+,K+,Mn2+,Ca2+,Mg2+,Sr2+ and Ba2+ using ion chromatography - Method for water and waste water
DS/ISO 11916-2:2013 Soil quality - Determination of selected explosives and related compounds - Part 2: Method using gas chromatography (GC) with electron capture detection (ECD) or mass spectrometric detection (MS)
DS/EN ISO 20042:2021 Measurement of radioactivity – Gamma-ray emitting radionuclides – Generic test method using gamma-ray spectrometry (ISO 20042:2019)
DS/ISO/TS 13278:2012 Nanotechnologies - Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
DS/EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser
DS/CEN/TS 16171:2013 Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS)
DS/ISO 15096:2008 Jewellery - Determination of silver in 999 0/00 silver jewellery alloys - Difference method using inductively coupled plasma optical emission spectroscopy (ICP-OES)
DS/EN 15308:2008 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection
DS/EN 3475-702:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 702: Screen pushback capability

Fujian Provincial Standard of the People's Republic of China, How to use electron spectroscopy

DB35/T 110-2000 Electron probe and scanning electron microscope X-ray energy spectrum analysis method for paint physical evidence detection

Military Standard of the People's Republic of China-General Armament Department, How to use electron spectroscopy

GJB 6785-2009 Method for measuring the shielding effectiveness of military electronic equipment shelter
GJB 9562-2018 Simulated field neutron spectrum and fluence measurement methods for radiation-resistant reinforcement: Threshold detector method
GJB 5240-2004 Requirement and measurement method for electromagnetic shielding effectiveness of cabinets,recks and subracks of military electronic equipment

RU-GOST R, How to use electron spectroscopy

GOST ISO 10727-2013 Tea and instant tea. Determination of caffeine content. Method using high-performance liquid chromatography
GOST R 50289-1992 Hollow insulators for use in electrical equipment. Test methods
GOST 33305-2015 Lubricating oils. Method for determination of phosphorus, sulfur, calcium and zinc by energy dispersive X-ray fluorescence spectroscopy
GOST 33616-2015 Food products, food raw materials. Method for determination of residues of arsenic containing growth stimulators using high performance liquid chromatography-mass spectrometry with inductively coupled plasma
GOST 31869-2012 Water. Methods for the determination of cations (ammonium, barium, potassium, calcium, lithium, magnesium, sodium, strontium) content using capillary electrophoresis
GOST R 55845-2013 Reagents and high purity substances. Determination of impurities of chemical elements by atomic-emission spectrometry with inductively coupled plasma

AENOR, How to use electron spectroscopy

UNE-EN ISO 12010:2014 Water quality - Determination of short-chain polychlorinated alkanes (SCCPs) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI) (ISO 12010:2012)
UNE-EN ISO 11206:2013 Water quality - Determination of dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR) (ISO 11206:2011)
UNE-EN ISO 11543:2002 Modified starch - Determination of hydroxypropyl content - Method using proton nuclear magnetic resonance (NMR) spectrometry. (ISO 11543:2000)
UNE-EN ISO 16014-5:2013 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection (ISO 16014-5:2012)
UNE-EN ISO 9167-1:1996 RAPESEED. DETERMINATION OF GLUCOSINOLATES CONTENT. PART 1: METHODD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY. (ISO 9167-1:1992).
UNE-EN ISO 12846:2012 Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846:2012)
UNE-ISO 15998:2010 Earth-moving machinery -- Machine-control systems (MCS) using electronic components -- Performance criteria and tests for functional safety
UNE-EN ISO 14911:2000 WATER QUALITY. DETERMINATION OF DISSOLVED LI+, NA+, NH4+, K+, MN2+, CA2+, MG2+, SR2+ AND BA2+ USING ION CHROMATOGRAPHY. METHOD FOR WATER AND WASTE WATER (ISO 14911:1998)

VN-TCVN, How to use electron spectroscopy

TCVN 7866-2008 Lubricating oils.Determination of additive elements by inductively coupled plasma atomic emission spectrometry

GOSTR, How to use electron spectroscopy

PNST 507-2020 Nanotechnologies. Single-wall carbon nanotubes. Characterization by using transmission electron microscopy and energy dispersive X-ray spectrometry
GOST R 57268.5-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 5. Method using light-scattering detection

Professional Standard - Public Safety Standards, How to use electron spectroscopy

GA/T 909-2010 Collecting and packaging method for trace evidence-Gunshot residue(SEM/EDS examination)
GA/T 823.3-2018 Methods of Examination of Paint Evidence in Forensic Science Part 3: Scanning Electron Microscopy/X-ray Spectroscopy

CN-DB 4, How to use electron spectroscopy

DB4206/T 61-2023

RO-ASRO, How to use electron spectroscopy

SR 2567-5-1996 Soft drinks - Methods of analysis - Determination of artificial sweeteners - Method using high-performance liquid chromatography

Institute of Electrical and Electronics Engineers (IEEE), How to use electron spectroscopy

IEEE Std C62.38-1995 IEEE Guide on Electrostatic Discharge (ESD): ESD Withstand Capability Evaluation Methods (for Electronic Equipment Subassemblies)
IEEE Std C62.38-1994 Guide on Electrostatic Discharge (ESD): ESD Withstand Capability Evaluation Methods (for Electronic Equipment Subassemblies)

Guangdong Provincial Standard of the People's Republic of China, How to use electron spectroscopy

DB44/T 1216-2013 Characterization of graphene using scanning electron microscopy and X-ray spectroscopy
DB44/T 1215-2013 Characterization of Single-Walled Carbon Nanotubes Using Scanning Electron Microscopy and Energy Spectroscopy

American National Standards Institute （ANSI), How to use electron spectroscopy

ANSI/ASTM D5296:1997 Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography, Test Method of (08.03)

Association of German Mechanical Engineers, How to use electron spectroscopy

VDI 3820-2006 Consideration of the use of electronic data processing in building-services calculation methods

IN-BIS, How to use electron spectroscopy

IS 7146 Pt.3-1974

工业和信息化部, How to use electron spectroscopy

HG/T 4955-2016 Performance test method for radio frequency identification (RFID) electronic tags for tires
YS/T 273.17-2020 Methods of chemical analysis and physical properties of cryolite Part 17: Determination of elemental content by inductively coupled plasma atomic emission spectrometry

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, How to use electron spectroscopy

GJB 6239.12-2008 Test method of impregnated activated carbon for military. Part 12: Copper content. Inductively coupled plasma atomic emission spectrometry
GJB 6239.13-2008 Test method of impregnated activated carbon for military. Part 13: Zinc content. Inductively coupled plasma atomic emission spectrometry
GJB 6239.14-2008 Test method of impregnated activated carbon for military. Part 14: Molybdenum content. Inductively coupled plasma atomic emission spectrometry
GJB 6239.15-2008 Test method of impregnated activated carbon for military. Part 15: Silver content. Inductively coupled plasma atomic emission spectrometry

European Committee for Standardization (CEN), How to use electron spectroscopy

prEN ISO 16796 Nuclear energy - Determination of Gd2O3 content in gadolinium fuel blends and gadolinium fuel pellets by atomic emission spectrometry using an inductively coupled plasma source (ICP-AES) (ISO 16796:2022)
CEN EN 15308-2008 Characterization of waste — Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection
prEN ISO 20714:2021 E-liquid - Determination of nicotine, propylene glycol and glycerol in liquids used in electronic nicotine delivery devices - Gas chromatographic method (ISO 20714:2019)
EN 16319:2013+A1:2015 Fertilizers and liming materials - Determination of cadmium, chromium, lead and nickel by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution
DD ENV 14226-2002 Advanced technical ceramics - Test methods for ceramic powders - Determination of calcium, magnesium, iron and aluminium in silicon nitride by using flame atomic absorption spectroscopy (FAAS) or inductively coupled plasma atomic emission spectroscopy (IC

Professional Standard - Non-ferrous Metal, How to use electron spectroscopy

YS/T 644-2007 Determination method of Pt-Rn alloy film.Determination of alloyed Pt content and alloyed Rn content by X-ray photoelectron spectroscopy
YS/T 574.5-2009 Methods for chemical analysis of zirconium powder for electro-vacuum uses.Determination of calcium and magnesium content by inductively coupled plasma atomic emission spectrometry

Japan Electronics and Information Technology Industries Association, How to use electron spectroscopy

EIAJ RC-2372-1997 Test methods of seal performance of aluminium electrolytic capacitors with non-solid electrolyte for use in electronic equipment

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., How to use electron spectroscopy

IEEE C62.38-1994 Guide on Electrostatic Discharge (ESD): ESD Withstand Capability Evaluation Methods (for Electronic Equipment Subassemblies)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., How to use electron spectroscopy

ASHRAE 4517-2002 Development of a Methodology for Baselining the Energy Use of Large MultBuilding Central Plants

AT-ON, How to use electron spectroscopy

OENORM EN ISO 20714:2021 E-liquid - Determination of nicotine, propylene glycol and glycerol in liquids used in electronic nicotine delivery devices - Gas chromatographic method (ISO 20714:2019)

Professional Standard-Ships, How to use electron spectroscopy

CB/T 4390.9-2013 Methods for chemical analysis of high manganese aluminum bronze for propeller.Part9:The inductively coupled plasma atomic emission spectrometric method

Professional Standard - Energy, How to use electron spectroscopy

NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)

国家能源局, How to use electron spectroscopy

SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)
NB/T 25087-2018 Test method for kinetic properties of ion exchange resins used in nuclear power plant water treatment

ZA-SANS, How to use electron spectroscopy

SANS 12653-2:2006 Electronic imaging - Test target for the black-and-white scanning of office documents Part 2: Method of use

ESD - ESD ASSOCIATION, How to use electron spectroscopy

TR17.0-01-2015 ESD Process Assessment Methodologies in Electronic Production Lines – Best Practices Used in Industry

KR-KS, How to use electron spectroscopy

KS L 1671-2023 Method for chemical analysis of titanium dioxide powders using inductively coupled plasma–optical emission spectrometry