ZH
RU
ES

gpc test peak

gpc test peak, Total:69 items.

In the international standard classification, gpc test peak involves: Electronic tubes, Construction materials, Road engineering, Electricity. Magnetism. Electrical and magnetic measurements, Aerosol containers, Optoelectronics. Laser equipment, Special measuring equipment for use in telecommunications, Analytical chemistry, Internal combustion engines, Nuclear energy engineering, Protective equipment, Lubricants, industrial oils and related products, Non-ferrous metals, Rectifiers. Convertors. Stabilized power supply.

Professional Standard - Aerospace, gpc test peak

QJ 1870-1990 Epoxy resin molecular weight and its distribution test method (GPC method)

Professional Standard - Electron, gpc test peak

SJ 454-1973 Methods of measurement for peak voltage drop of tube, reverse peak voltage drop of tube and rectifying current of high-voltage rectifier tubes
SJ 453-1973 Methods of measurement for pulse peak of rectifying current of high-voltage rectifier tubes
SJ 2355.7-1983 Method of measurement for peak emission wavelength and spectral radiation bandwidth of light-emitting devices
SJ 2658.12-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for peak emission wavelength and spectral half width
SJ 1787-1981 Method of measurement for rated peak working reverse voltage and reverse current of silicon single phase bridge rectifiers,up to 5A

SE-SIS, gpc test peak

SIS SS IEC 790:1989 High-voltage test technique — Oscilloscopes and peak voltmeters for impulse tests

German Institute for Standardization, gpc test peak

DIN 65474:1992-11 Aerospace; fibre reinforced plastics; thermal-spike test method
DIN EN 14488-3:2006-09 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens; German version EN 14488-3:2006 / Note: To be replaced by DIN EN 14488-3 (2021-05).
DIN EN 2349-309:2007-05 Aerospace series - Requirements and test procedures for relays and contactors - Part 309: Exported spikes; German and English version EN 2349-309:2006
DIN EN 62739-3:2017-10 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 3: Selection guidance of erosion test methods (IEC 62739-3:2017); German version EN 62739-3:2017
DIN EN 14488-3:2021-05 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens; German and English version prEN 14488-3:2021 / Note: Date of issue 2021-04-09*Intended as replacement for DIN EN 14488-3 (2006...

British Standards Institution (BSI), gpc test peak

BS EN 14488-3:2006 Testing sprayed concrete - Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
BS 6647:1985 Guide to oscilloscopes and peak voltmeters for impulse tests
BS ISO 16900-12:2016 Respiratory protective devices. Methods of test and test equipment. Determination of volume-averaged work of breathing and peak respiratory pressures
21/30433501 DC BS EN 14488-3. Testing sprayed concrete - Part 3. Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens

Standard Association of Australia （SAA）, gpc test peak

AS/NZS 2512.8:1998 Methods of testing protective helmets Method 8: Measurement of peak deflection
AS/NZS ISO 16900.12:2021 Respiratory protective devices — Methods of test and test equipment, Method 12: Determination of volume-averaged work of breathing and peak respiratory pressures

Professional Standard - Aviation, gpc test peak

HB 7119-1994 Digital Testing of Voltage Spikes in Aircraft Electrical Systems

American Society for Testing and Materials (ASTM), gpc test peak

ASTM E1337-90(2002) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire
ASTM E1337-90(1996) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire
ASTM D6534-05(2010) Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser
ASTM E1337-90(2008) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
ASTM E1337-90(2012) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
ASTM E1337-19 Standard Test Method for Determining Longitudinal Peak Braking Coefficient (PBC) of Paved Surfaces Using Standard Reference Test Tire
ASTM D3536-76e1 Standard Test Method for Molecular Weight Averages And Molecular Weight Distribution Of Polystyrene By Liquid Exclusion Chromatography (Gel Permeation Chromatography - Gpc)
ASTM D3536-91 Standard Test Method for Molecular Weight Averages And Molecular Weight Distribution Of Polystyrene By Liquid Exclusion Chromatography (Gel Permeation Chromatography - Gpc)
ASTM C1871-22 Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
ASTM E1337-90 Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire
ASTM C1871-18a Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
ASTM C1871-18 Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
ASTM E1337-90(2018) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
ASTM D7214-07a(2019) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-20 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a(2012) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-23 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-22 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-06 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D8473-22 Standard Test Method for Determining the Biobased content of Liquid Hydrocarbon Fuels Using Liquid Scintillation Counting with Spiked Carbon-14
ASTM D3593-80(1986)e1 Test Method for Molecular Weight Averages and Molecular Weight Distribution of Certain Polymers by Liquid Size-Exclusion Chromatography (Gel Permeation Chromatography GPC) Using Universal Calibration

AT-ON, gpc test peak

ONORM C 9444-1984 Testing of elastomers; analysis of multi-peak traces obtained in fear-, adhesion- and peel tests

IN-BIS, gpc test peak

IS 11349-1985

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., gpc test peak

ASHRAE 3673-1993 Laboratory Testing of Control Strategies to Reduce Peak Air- Conditioning Loads
ASHRAE 4837-2006 Modeling and Testing of a Utility Peak Reducing Residential Hot/Dry Air Conditioner (HDAC) Using Microchannel Heat Exchangers

Electronic Components, Assemblies and Materials Association, gpc test peak

ECA EIA-364-71C-2008 TP-71C Solder Wicking (Wave Solder Technique) Test Procedure for Electrical Connectors and Sockets

ECIA - Electronic Components Industry Association, gpc test peak

364-71-1992 TP-71 Solder Wicking Test Procedure for Electrical Connectors/Sockets (Wave Solder Technique)
EIA-364-71A-1999 TP-71A Solder Wicking (Wave Solder Technique) Test Procedure for Electrical Connectors and Sockets
EIA-364-71C-2008 TP-71C Solder Wicking (Wave Solder Technique) Test Procedure for Electrical Connectors and Sockets

Association Francaise de Normalisation, gpc test peak

NF S76-020-12*NF ISO 16900-12:2016 Respiratory protective devices - Methods of test and test equipment - Part 12 : determination of volume-averaged work of breathing and peak respiratory pressures
NF ISO 16900-12:2016 Appareils de protection respiratoire - Méthodes d'essai et équipement d'essai - Partie 12 : détermination du travail respiratoire en fonction du volume respiratoire et détermination des pics de pressions respiratoires

RU-GOST R, gpc test peak

GOST 21185-1975 Quasypeak level meters of the sound frequency electrical signals. Types, basic parameters and methods of testing

未注明发布机构, gpc test peak

BS 6319-9:1987(1999) Testing of resin compositions for use in construction — Part 9 : Method for measurement and classification of peak exotherm temperature

Korean Agency for Technology and Standards (KATS), gpc test peak

KS M 1915-2009 Phthalic anhydride for industrial use－Methods of test－Determination of 1,4-naphthaquinone content－Colorimetric method

Shanghai Provincial Standard of the People's Republic of China, gpc test peak

DB31/T 1146.1-2019 Smart Grid Energy Storage System Performance Test Technical Specification Part 1 Peak Shaving and Valley Filling Application

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, gpc test peak

GB/T 24981.1-2010 Test methods of long afterglow phosphors activated by rare earths.Part 1:Determination of emission dominantpeak and chromaticity coordinates
GB/T 14634.2-2010 Test methods of rare earth three-band phosphors for fluorescent lamps.Part 2:Determination of emission dominantpeak and chromaticity

国家市场监督管理总局、中国国家标准化管理委员会, gpc test peak

GB/T 24981.1-2020 Test methods of rare earth long afterglow phosphors—Part 1: Determination of emission dominantpeak and chromaticity coordinates

Danish Standards Foundation, gpc test peak

DS/EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens

Lithuanian Standards Office , gpc test peak

LST EN 14488-3-2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens

European Committee for Standardization (CEN), gpc test peak

prEN 14488-3-2021 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens

AENOR, gpc test peak

UNE-EN 14488-3:2007 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens

ES-UNE, gpc test peak

UNE-EN 2349-309:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 309: Exported spikes (Endorsed by AENOR in March of 2007.)
UNE-EN 62739-3:2017 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 3: Selection guidance of erosion test methods (Endorsed by Asociación Española de Normalización in May of 2017.)

International Organization for Standardization (ISO), gpc test peak

ISO 16900-12:2016 Respiratory protective devices - Methods of test and test equipment - Part 12: Determination of volume-averaged work of breathing and peak respiratory pressures

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, gpc test peak

PREN 2349-309-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 309: Exported Spikes (Edition P 1)

International Telecommunication Union (ITU), gpc test peak

ITU-T Q.2963.1 C-2000 Digital subscriber signalling system No. 2 – Connection modification: Peak cell rate modification by the connection owner: Test suite structure and test purposes (TSS & TP) for the user (Study Group 11)
ITU-T Q.2963.1 E-2000 Digital subscriber signalling system No. 2 – Connection modification: Peak cell rate modification by the connection owner: Test suite structure and test purposes (TSS & TP) for the network (Study Group 11)