ZH
RU
ES

large metallographic

large metallographic, Total:324 items.

In the international standard classification, large metallographic involves: Rotating machinery, Iron and steel products, Photography, Products of non-ferrous metals, Non-ferrous metals, Testing of metals, Non-destructive testing, Shipbuilding and marine structures in general, Lamps and related equipment, Fasteners, Electrical engineering in general, Power transmission and distribution networks, Semiconductor devices, Resistors, Integrated circuits. Microelectronics, Valves, Transformers. Reactors, Protection against crime, Woodworking equipment, Cutting tools, Particle size analysis. Sieving, Lubricants, industrial oils and related products, Jewellery, Road vehicles in general, Surface treatment and coating, Nuclear energy engineering, Welding, brazing and soldering, Fasteners for aerospace construction, Kitchen equipment, Cans. Tins. Tubes, Components and accessories for telecommunications equipment, Barrels. Drums. Canisters, Construction of waterways and ports, Equipment for the chemical industry, Materials for aerospace construction, Tobacco, tobacco products and related equipment, Vocabularies.


Professional Standard - Electricity, large metallographic

  • DL/T 2024-2019 Guidelines for Type Test of Large Condensers
  • DL/T 2122-2020 Technical Specifications for Debugging of Large Synchronous Condensers
  • DL/T 2349-2021 Test guide for no-load characteristics of large condensers
  • DL/T 652-1998 Technical guidelines for metallurgic replica

HU-MSZT, large metallographic

Professional Standard - Machinery, large metallographic

  • JB/T 6402-2006 Heavy low alloy steel castings
  • JB/T 6402-1992 Large Low Alloy Steel Castings
  • JB/T 6396-1992 Large alloy structural steel forgings
  • JB/T 8477.2-1996 Large electronic flasher for photographic purposes in studio
  • JB/T 6393-1992 Alloy tool steels intended to be used in large forgings
  • JB/T 4120-2006 Heavy forged alloy steel back up rolls
  • JB/T 4120-1993 Large forged alloy steel backup roll
  • JB/T 8668-1997 Large vertical type triphase asynchronous motors. Technical specification
  • JB/T 8668-2011 Technical requirement for the three-phase large vertical asynchronous motor
  • JB/T 3733-2006 Heavy wrought alloy steel work rolls for hot reduction
  • JB/T 3733-1993 Large forged alloy steel hot-rolled work rolls
  • JB/T 8667.1-1997 Large three-phase synchronous motors. Technical specification TK series
  • JB/T 8667.2-1997 Large three-phase synchronous motors. Technical specification TL series
  • JB/T 6396-2006 Specification for the heavy alloy structural steel forgings
  • JB/T 2224-2000 Technical requirements for the large-sized 3-phase 4-pole synchronous a.c.motors
  • JB/T 6519-2015 Specification of 3-phase large and middle sized asynchronous motor for coal beater mill
  • JB/T 6519-2005 Specification of 3-phase large-middle sized asynchronous motor for coal beater mill
  • JB/T 1473-2000 Technical requirements for the 3-phase large synchronous machine used in mining graining machine
  • JB/T 8667.2-2013 Technical specifications for large three-phase synchronous motors.Part 2: TL series
  • JB/T 8667.1-2011 Large-scale three-phase synchronous motor technical specifications.Part 1:TK Series
  • JB/T 6519-1992 Specifications for large and medium-sized three-phase asynchronous motors for fan coal mills
  • JB/T 56117.3-1999 Quality classification of small and medium-sized motor products Three-phase asynchronous motors for hoisting and metallurgy
  • JB/T 5870-2002 Technical specification for YZR range of high-voltage medium-sized wound-rotor three-phase induction motors for crane and metallurgical application
  • JB/T 7078-2014 Specifications for YZRF and YZRG series forced-ventilated wound-rotor three-phase induction motors for crane and metallurgical applications
  • JB/T 7078-2002 Technical specifications for YZRF and YZRG range of forced-ventilated wound-rotor three-phase induction motors for crane and metallurgical application
  • JB/T 7078-1993 Technical specifications of YZRF, YZRG series hoisting and metallurgical three-phase asynchronous motors with forced ventilation type wound rotor

National Metrological Technical Specifications of the People's Republic of China, large metallographic

  • JJF 1512-2015 Program of Pattern Evaluation of Liquid Chromatographys
  • JJF 1694-2018 Program of Pattern Evaluation of Gas Chromatographs
  • JJF 1701.6-2019 Program of Pattern Evaluation of Instrument Transformers—Part 6:Three-phase Combined Instrument Transformers

CU-NC, large metallographic

  • NC 05-08-1986 Metallography. Determination of Metals Grain Size, Testing Method

RU-GOST R, large metallographic

  • GOST R 56282-2014 Aluminum alloy extruded large solid sections. Specifications
  • GOST 23089.16-1990 Integrated microcircuits. Method of measuring phase stability margin of operational amplifiers
  • GOST 23089.11-1983 Integrated circuits. Methods of measuring the operational amplifiers and voltage comparators input common mode voltage rejection ratio

IN-BIS, large metallographic

Group Standards of the People's Republic of China, large metallographic

  • T/CIET 234-2023
  • T/ZJBX 01-2019 Operating specifications of field metallographic replica
  • T/CSEE 0040-2017 Guidelines for Manufacturing Supervision and Factory Test Witness of Large Condensers
  • T/CSEE 0140-2019 General technical conditions for control and protection of large synchronous condensers
  • T/CEC 235-2019 Guidelines for the handover and start-up test of large-scale condensers in DC transmission projects
  • T/CEC 234-2019 Technical Guidelines for Manufacturing Supervision of Large-Scale Phase Adjusting Units for DC Transmission Projects
  • T/SXZX 006-2021 Alloy steel track pads for large mining excavators －Technical specification
  • T/CWDMA 004-2023 Specification on deployment and usage of security dogs (Large event venues and related areas)
  • T/JSGA 007-2023 Determination of cyanide in electroformed gold articles by headspace gas chromatography
  • T/CWAN 0033-2021 Specification for phased array ultrasonic testing of volumetric defects in friction stir welding of aluminum alloys

Professional Standard - Aerospace, large metallographic

  • QJ 3290-2007 Metallographic typical map of ZL114A cast aluminum alloy

Professional Standard-Ships, large metallographic

  • CB/T 3694-1995 On-site metallographic replica inspection method
  • CB/T 3903-1999 Metallographic examination of centrifugal casting cylinder liners for medium and high power diesel engines

American National Standards Institute （ANSI), large metallographic

  • ANSI C78.22-1995 Incandescent Lamps – A, G, PS, and Similar Shapes with E39 Mogul Screw Bases
  • ANSI C57.12.24-2000 Transformers - Underground-Type Three-Phase Distribution Transformers, 2500 kVA and Smaller: High Voltage 34 500 Grd Y/19 920 Volts and Below; Low Voltage, 480 Volts and Below - Requirements
  • ANSI/ASME B16.38-2012 Large Metallic Valves for Gas Distribution (Manually Operated, NPS 2 1/2 (DN 65) to NPS 12 (DN 300), 125 psig (8.6 bar) Maximum)

工业和信息化部, large metallographic

  • JB/T 2224-2018 Technical conditions of large three-phase four-pole synchronous motor
  • JB/T 6402-2018 Technical conditions for large low alloy steel castings
  • JB/T 1473-2018 Technical conditions of large three-phase synchronous motors for mining mills
  • JB/T 13378-2018 Technical conditions for work rolls of large forged alloy steel aluminum rolling mills

CZ-CSN, large metallographic

  • CSN 42 0491-1978 Alloys of the type alsi for casting. Evaluation of the metallographic structure
  • CSN ISO 3004-3:1993 Light gauge metal containers. Capacities and related caross-sections. Part 3: Open-top cans for drinks
  • CSN ISO 3004-6:1993 Light gauge metal containers. Capacities and related caross-sections. Part 6: Open-top cans for milk
  • CSN ISO 3004-4:1993 Light gauge metal containers. Capacities and related cross-sections. Part 4: Open-top cans for edible oil
  • CSN ISO 3004-1:1992 Light gauge metal containers — Capacities and related cross-sections Part 1: Open-top cans for generál food

IT-UNI, large metallographic

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, large metallographic

  • GB/T 33084-2016 Heavy alloy structural steel forgings—Technical specification

Military Standard of the People's Republic of China-General Armament Department, large metallographic

  • GJB 2663-1996 Specification for large-size aluminum alloy profiles for aviation use
  • GJB 9547-2018 High-energy X-ray photography detection method of large solid rocket motor combustion chamber

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, large metallographic

  • GB/T 13957-2008 Technical requirement for the fundamental series of three-phase large asynchronous motor
  • GB/T 13957-1992 Technical requirements for the fundamental series of 3-Phase large asynchronous motors
  • GB/T 13957-2022 Technical requirements for the fundamental series of three-phase large asynchronous motor
  • GB/T 6401-1986 Micrographic method for determining area fraction of the alpha-phases using charts in ferritic-austenitic stainless steels
  • GB/T 17455-2008 Non-destrctive testing.Metallographic replica techniques of surface examination
  • GB/T 32289-2015 Quality carbon structure steels and alloy structure steels for large forgings

Aerospace Industries Association/ANSI Aerospace Standards, large metallographic

  • AIA/NAS NAS 301-1990 Washer - 2024 Aluminum Alloy, Flat, Oversize OD (Rev. 1)
  • AIA/NAS NAS 1703-1710-1988 Bolt, 100 Degree Flush Head .0156 Oversize Alloy Steel, 160,000 psi Rev. 9
  • AIA/NAS NAS 1703-1988 Bolt, 100 Degree Flush Head .0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
  • AIA/NAS NAS 1704-1988 Bolt, 100 Degree Flush Head .0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
  • AIA/NAS NAS 1705-1988 Bolt, 100 Degree Flush Head .0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
  • AIA/NAS NAS 1706-1988 Bolt, 100 Degree Flush Head .0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
  • AIA/NAS NAS 1707-1988 Bolt, 100 Degree Flush Head .0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
  • AIA/NAS NAS 1708-1988 Bolt, 100 Degree Flush Head .0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
  • AIA/NAS NAS 1709-1988 Bolt, 100 Degree Flush Head .0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
  • AIA/NAS NAS 1710-1988 Bolt, 100 Degree Flush Head .0156 Oversize Alloy Steel, 160,000 psi (Rev. 9)
  • AIA/NAS NAS 2005-1973 Bolt-Lock, Tension, Protruding Head, Standard and Oversize, Pull-Type, Titanium Alloy Rev. 4
  • AIA/NAS NAS 2005-2012-1973 Bolt-Lock, Tension, Protruding Head, Standard ans Rversize, Pull-Type, Titanium Alloy Rev. 4
  • AIA/NAS NAS 2006-1973 Bolt-Lock, Tension, Protruding Head, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 4)
  • AIA/NAS NAS 2008-1973 Bolt-Lock, Tension, Protruding Head, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 4)
  • AIA/NAS NAS 2010-1973 Bolt-Lock, Tension, Protruding Head, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 4)
  • AIA/NAS NAS 2012-1973 Bolt-Lock, Tension, Protruding Head, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 4)
  • AIA/NAS NAS 2125-1973 Bolt-Lock, Tension, 100 Degree Crown Head, Standard and Oversize, Pull-Type, Titanium Alloy
  • AIA/NAS NAS 2125-2132-1973 Bolt-Lock, Tension, 100 Degree Crown Head, Standard and Oversize, Pull-Type, Titanium Alloy
  • AIA/NAS NAS 2126-1973 Bolt-Lock, Tension, 100 Degree Crown Head, Standard and Oversize, Pull-Type, Titanium Alloy
  • AIA/NAS NAS 2128-1973 Bolt-Lock, Tension, 100 Degree Crown Head, Standard and Oversize, Pull-Type, Titanium Alloy
  • AIA/NAS NAS 2130-1973 Bolt-Lock, Tension, 100 Degree Crown Head, Standard and Oversize, Pull-Type, Titanium Alloy
  • AIA/NAS NAS 2132-1973 Bolt-Lock, Tension, 100 Degree Crown Head, Standard and Oversize, Pull-Type, Titanium Alloy
  • AIA/NAS NAS 2406-1973 Bolt-Lock, Shear, Protruding Head, Standard and Oversize, Pull-Type, Titanium Alloy Revision 3
  • AIA/NAS NAS 2406-2412-1973 Bolt-Lock, Shear, Protruding Head, Standard and Oversize, Pull-Type, Titanium Alloy Revision 3
  • AIA/NAS NAS 2408-1973 Bolt-Lock, Shear, Protruding Head, Standard and Oversize, Pull-Type, Titanium Alloy Revision 3
  • AIA/NAS NAS 2410-1973 Bolt-Lock, Shear, Protruding Head, Standard and Oversize, Pull-Type, Titanium Alloy Revision 3
  • AIA/NAS NAS 2412-1973 Bolt-Lock, Shear, Protruding Head, Standard and Oversize, Pull-Type, Titanium Alloy Revision 3
  • AIA/NAS NAS 2506-1973 Bolt-Lock, Shear, 100 Degree Head, Standard and Oversize, Pull-Type, Titanium Alloy Revision 3
  • AIA/NAS NAS 2506-2512-1973 Bolt-Lock, Shear, 100 Degree Head, Standard and Oversize, Pull-Type, Titanium Alloy Rev. 3
  • AIA/NAS NAS 2508-1973 Bolt-Lock, Shear, 100 Degree Head, Standard and Oversize, Pull-Type, Titanium Alloy Revision 3
  • AIA/NAS NAS 2510-1973 Bolt-Lock, Shear, 100 Degree Head, Standard and Oversize, Pull-Type, Titanium Alloy Revision 3
  • AIA/NAS NAS 2512-1973 Bolt-Lock, Shear, 100 Degree Head, Standard and Oversize, Pull-Type, Titanium Alloy Revision 3
  • AIA/NAS NAS 1603-1610-1992 Bolt, 100 Deg Head Slotted Dovetail, .0312 Oversize, Alloy Steel, 160,000 psi Rev. 9
  • AIA/NAS NAS 2115-1973 Bolt-Lock, Tension, 100 Degree Head (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy
  • AIA/NAS NAS 2115-2122-1973 Bolt-Lock, Tension, 100 Degree Head (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy
  • AIA/NAS NAS 2116-1973 Bolt-Lock, Tension, 100 Degree Head (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy
  • AIA/NAS NAS 2118-1973 Bolt-Lock, Tension, 100 Degree Head (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy
  • AIA/NAS NAS 2120-1973 Bolt-Lock, Tension, 100 Degree Head (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy
  • AIA/NAS NAS 2122-1973 Bolt-Lock, Tension, 100 Degree Head (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy
  • AIA/NAS NAS 1603-1992 Bolt, 100 Deg Head Slotted Dovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9)
  • AIA/NAS NAS 1604-1992 Bolt, 100 Deg Head Slotted Dovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9)
  • AIA/NAS NAS 1605-1992 Bolt, 100 Deg Head Slotted Dovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9)
  • AIA/NAS NAS 1606-1992 Bolt, 100 Deg Head Slotted Dovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9)
  • AIA/NAS NAS 1607-1992 Bolt, 100 Deg Head Slotted Dovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9)
  • AIA/NAS NAS 1608-1992 Bolt, 100 Deg Head Slotted Dovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9)
  • AIA/NAS NAS 1609-1992 Bolt, 100 Deg Head Slotted Dovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9)
  • AIA/NAS NAS 1610-1992 Bolt, 100 Deg Head Slotted Dovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9)

工业和信息化部/国家能源局, large metallographic

  • JB/T 4120-2017 Technical conditions for large forged alloy steel backup rollers
  • JB/T 3733-2017 Technical conditions for large forged alloy steel hot rolling work rolls
  • JB/T 12970-2016 Technical conditions of three-phase asynchronous motor for large main drainage pump (dry type) for mining
  • JB/T 12971-2016 Technical conditions of three-phase asynchronous motor for large main drainage pump (submersible type) for mining

PT-IPQ, large metallographic

  • NP 3315-1988 Packing glass Normal manufacture glass bottles. Dimensional relationship and tolerances
  • NP 3745-1991 Copper alloys Forgings. Mechanical properties
  • NP 3744-1991 Copper alloys Extruded sections. Mechanical properties
  • NP 2762/2-1984
  • NP 3639-1989 Cooper alloys Wrought copper-tin alloys. Chemical composition and forms of wrought products
  • NP 2762/1-1984
  • NP 3663-1989 Cooper alloys Special wrought alloys. Chemical composition and forms of wrought products

Association Francaise de Normalisation, large metallographic

  • NF G07-192*NF EN 14115:2002 Textiles - Burning behaviour of materials for marquees, largs tents and related products - Ease of ignition
  • NF EN 14115:2002 Textiles - Comportement au feu des marquises, tentes de grandes dimensions et produits apparentés - Allumabilité
  • NF EN 2321:2019 Série aérospatiale - Alliage d'aluminium 2024-T3 - Barres et profilés - a supérieure ou égale à 150 mm
  • UTE C53-240-6:2007 Entraînements électriques de puissance à vitesse variable - Partie 6 : guide de détermination du type de régime de charge et de dimensionnement en courant correspondant
  • NF EN 4265:2014 Série aérospatiale - Rotules lisses, métal à métal en acier résistant à la corrosion - Série large - Dimensions et charges - Séries en inches
  • NF EN 4266:2013 Série aérospatiale - Rotules lisses métal à métal en acier à la corrosion, cadmiées - Série large - Dimensions et charges - Séries en inches
  • FD X43-121:2021 Atmosphères ambiantes - Capteurs pour la qualité de l'air - Concepts relatifs à l'utilisation de dispositifs de type "capteur"/"système-capteur"
  • NF EN 300127:2000 Télécommunications - Compatibilité électromagnétique et spectre radioélectrique (ERM) - Essais relatifs aux rayonnements émis par les grands systèmes de télécommunications
  • NF EN ISO 9692-3:2016 Soudage et techniques connexes - Types de préparation de joints - Partie 3 : soudage MIG et TIG de l'aluminium et de ses alliages
  • NF H31-400-1*NF EN 13025-1:2006 Packaging - Light gauge metal containers - Part 1 : nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml

Japanese Industrial Standards Committee (JISC), large metallographic

  • JIS H 7101:1989 Method for determining the transformation temperatures of shape memory alloys

Professional Standard - Electron, large metallographic

  • SJ 774-1974 Detail specification for silicon NPN alloy diffused low-frequency high power transistors,Type 3DD64
  • SJ 768-1974 Detail specification for silicon NPN alloy diffused low-frequency high power transistors,Type 3DD55
  • SJ 770-1974 Detail specification for silicon NPN alloy diffused low-frequency high power transistors,Type 3DD58
  • SJ 772-1974 Detail specification for silion NPN alloy diffused low-frequency high power transistors,Type 3DD61
  • SJ 776-1974 Detail specification for silicon NPN alloy diffused low-frequency high power transistors,Type 3DD67
  • SJ 778-1974 Detail specification for silicon NPN alloy diffused low-frequency high power transistors,Type 3DD70
  • SJ 780-1974 Detail specification for silicon NPN alloy diffused low-frequency high power transistors,Type 3DD72
  • SJ 766-1974 Detail specification for silicon NPN alloy diffused low-frequency high power transistors,Type 3DD52

Defense Logistics Agency, large metallographic

YU-JUS, large metallographic

  • JUS C.A7.091-1985 Non-destructive testing. Metallographic replica technigues ofsurface examination
  • JUS D.F1.042-1984 Wooden packaging. Tray with lid, large, framvvork with wire

TR-TSE, large metallographic

  • TS 2310-1976 Non- Destructive Testing- Metallographic Replica Technigues of Surface examination

RO-ASRO, large metallographic

BE-NBN, large metallographic

  • NBN-ISO 2790:1991 Belt drives - Narrow V-belts for the automotive industry and corresponding pulleys - Dimensions

American Society of Mechanical Engineers (ASME), large metallographic

  • ASME B16.38-2007 Large Metallic Valves for Gas Distribution Manually Operated, NPS 21/2 (DN 65) to NPS 12 (DN 300), 125 psig (8.6 bar) Maximum
  • ASME B16.38-2012 Large Metallic Valves for Gas Distribution Manually Operated@ NPS 2 1/2 (DN 65) to NPS 12 (DN 300)@ 125 psig (8.6 bar) Maximum
  • ASME B16.38-1978 Large Metallic Valves for Gas Distn: Mnl Oprd,NPS 2 1/2 (DN 65) to NPS 12 (DN 300), 125 psig (8.6 bar) Maximum
  • ASME B16.38-2012(R2017) Large Metallic Valves for Gas Distribution: Manually Operated, NPS 2 1/2 (DN 65) to NPS 12 (DN 300), 125 psig (8.6 bar) Maximum
  • ASME B16.38-1985 Large metallic valves for gas distribution (manually operated, NPS 2 1/2 to 12, 125 psig maximum)

Professional Standard - Ferrous Metallurgy, large metallographic

  • YB/T 4290-2012 Determination method of the largest grain size grade (ALA grain size) on the metallographic inspection surface

Taiwan Provincial Standard of the People's Republic of China, large metallographic

  • CNS 9965-1989 Dimensions Relating to Molds for Plastics Injection Molding Machines
  • CNS 9966-1986 Dimensions Relating to Molds for Plastics Compression Molding Machines and Plastics Transfer Molding Machines

AGMA - American Gear Manufacturers Association, large metallographic

  • P84FTM7-1984 Hobs with Carbide Inserts for Machining of Large Gears

American Society for Testing and Materials (ASTM), large metallographic

  • ASTM D4557-85(1995) Standard Practice for Collecting Benthic Macroinvertebrates with Surber and Related Type Samplers
  • ASTM D4557-85(2002) Standard Practice for Collecting Benthic Macroinvertebrates with Surber and Related Type Samplers
  • ASTM E930-99 Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
  • ASTM E930-99(2007) Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
  • ASTM E930-18 Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
  • ASTM E930-99(2015) Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
  • ASTM A90/A90M-07 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
  • ASTM A690/A690M-05 Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
  • ASTM A847/A847M-21 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance

German Institute for Standardization, large metallographic

  • DIN EN 14115:2002-04 Textiles - Burning behaviour of materials for marquees, large tents and related products - Ease of ignition; German version EN 14115:2001
  • DIN 42677-4:1974 Totally enclosed fan-cooled alternating-current polyphase motors with squirrel-cage, design B5, B10, B14, with ball bearings; maximum envelope dimensions for design B5, B14
  • DIN 18865-10:2004 Equipment for commercial kitchens - Food distribution equipment - Part 10: Cash module - Requirements and testing
  • DIN V 42672:2011 Three phase asynchronous motors with squirrel-cage and with ventilated enclosures - design IM B3, IM B5 with bearings - maximum envelope dimensions
  • DIN EN 13025-1:2006-01 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml; German version EN 13025-1:2005
  • DIN 42672-2:1974 Alternating-current polyphase motors with ventilated enclosures and squirrel-cage, design B3, with ball bearings; maximum envelope dimensions
  • DIN 42673-4:1974 Totally-enclosed fan-cooled alternating-current polyphase motors with squirrel-cage, design B3, with ball bearings, maximum envelope dimensions
  • DIN 42676-2:1974 Alternating-current polyphase motors with ventilated enclosures and squirrel-cage, design B5, with ball bearings; maximum envelope dimensions
  • DIN EN 13025-1:2006 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml; English version of DIN EN 13025-1:2006
  • DIN 28084:2020 Support rings and ring supports on non-alloy and stainless steel apparatus - Dimensions, types, forms and maximum operating load
  • DIN 28084:2020-12 Support rings and ring supports on non-alloy and stainless steel apparatus - Dimensions, types, forms and maximum operating load
  • DIN V 42673-4:2011 Totally-enclosed fan-cooled three phase asynchronous motors with squirrel-cage - design IM B3, IM B5, IM B14 with bearings - maximum envelope dimensions

Indonesia Standards, large metallographic

  • SNI 05-6521.3-2001 Metal cutting band saw blades - Part 3: Characteristics relating to each type

Society of Automotive Engineers (SAE), large metallographic

  • SAE MS1008-2021 Lubricants, Industrial Oils, and Related Products, Type M (Metal Removal Fluids) - Specification
  • SAE MS1008-2007 Lubricants, Industrial Oils and Related Products Type M (Metal Removal Fluids) Specificationc
  • SAE AS3588A-2009 Pin and Plug, Expansion, Set of Parts AL Alloy 2024-T4 and 2024-T351, Short; STD and .010 Oversize Diameters, UNS A92024

US-CFR-file, large metallographic

  • CFR 17-43.6-2013 Commodity and Securities Exchanges. Part43:Real-time public reporting. Section43.6:Block trades and large notional off-facility swaps.

SAE - SAE International, large metallographic

  • SAE MS1008-2002 Lubricants@ Industrial Oils and Related Products Type M (Metal Removal Fluids) Specification
  • SAE AMS4769G-2015 Silver Alloy@ Brazing Filler Metal 45Ag - 24Cd - 16Zn - 15Cu 1125 to 1145 Degrees F (607 to 618 Degrees C) Solidus-Liquidus Range (Stabilzed Type) (UNS P07450)

International Organization for Standardization (ISO), large metallographic

  • ISO/TS 15827:2007 Road vehicles - Test procedures - Evaluating small female dummy arm and forearm interactions with driver frontal airbags and side airbags
  • ISO 3004-6:1986 Light gauge metal containers — Capacities and related cross-sections — Part 6: Open-top cans for milk
  • ISO 3004-4:1986 Light gauge metal containers — Capacities and related cross-sections — Part 4: Open-top cans for edible oil
  • ISO 3004-3:1986 Light gauge metal containers — Capacities and related cross-sections — Part 3: Open-top cans for drinks
  • ISO 6171:1982 Textile machinery and accessories; Bead wires and corresponding grooves for cards; Main types and dimensions
  • ISO 3004-5:1988 Light gauge metal containers — Capacities and related cross-sections — Part 5: Open-top cans for fish and other fishery products

Anhui Provincial Standard of the People's Republic of China, large metallographic

  • DB34/T 2844.2-2017 Design Guidelines for Structural Components of Large Low Temperature Superconducting Magnets Part 2: Metallic Components
  • DB34/T 2844.3-2017 Design criteria for structural components of large low-temperature superconducting magnets Part 3: Non-metallic components

ES-UNE, large metallographic

  • UNE-HD 123.6S2:1974 HOLLOW METALLIC WAVEGUIDES. PART 6: RELEVANT SPECIFICATIONS FOR MEDIUM FLAT RECTANGULAR WAVEGUIDES. (Endorsed by AENOR in May of 1995.)

Korean Agency for Technology and Standards (KATS), large metallographic

  • KS D ISO 10193-2004(2019) General use light gauge metal containers－Nominal filling volumes of round cylindrical and tapered containers of up to 40 000 mL
  • KS B ISO 9692-3:2019 Welding and allied processes — Types of joint preparation — Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys

Professional Standard - Nuclear Industry, large metallographic

  • EJ/T 20150.25-2018 Post-irradiation inspection of pressurized water reactor bundle fuel assemblies - Part 25: Metallographic examination of fuel rods

SE-SIS, large metallographic

  • SIS SMS 1297-1968 Fittings for piping. Sluice valves. Stuffing boxes for O-rings or similar components. Nominal pressure 10 kgf/cm' above atmospheric.

AENOR, large metallographic

  • UNE-EN 13026:2001 Packaging. Light-gauge metal packaging. Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml.
  • UNE-EN 13025-1:2006 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml

International Electrotechnical Commission (IEC), large metallographic

  • IEC 60153-6:1967/AMD1:1977 Amendment 1 - Hollow metallic waveguides - Part 6: Relevant specifications for medium flat rectangular waveguides

CH-SNV, large metallographic

  • SN 219 505/1-1982 Gas cylinders and gas cylinder valvesClassification of the valve connections for filling pressure S 200 barPart 1: General terms
  • VSM 34250-1950

United States Navy, large metallographic

  • NAVY QPL-22052-QPD-2011 VALVE, STOP AND STOP CHECK, GLOBE, ANGLE, AND Y PATTERN, CAST OR FORGED CARBON OR ALLOY STEEL, OUTSIDE SCREW AND YOKE (SIZES 2-1/2 INCHES AND LARGER)

British Standards Institution (BSI), large metallographic

  • BS EN 13025-1:2006 Packaging. Light gauge metal containers. Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml
  • BS EN 13025-1:2005 Packaging — Light gauge metal containers — Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml
  • BS DD ISO/TS 15827:2007 Road vehicles - Test procedures - Evaluating small female dummy arm and forearm interactions with driver frontal airbags and side airbags

Aerospace, Security and Defence Industries Association of Europe (ASD), large metallographic

  • ASD-STAN PREN 2061-1995 Aerospace Series Folded Profiles Top Hat-Section with Lipped Flanges in Aluminium and Aluminium Alloys Dimensions (Edition 2)

European Committee for Standardization (CEN), large metallographic

  • EN 4318:2007 Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated, bar and section De <= 100 mm, Rm >= 960 MPa
  • prEN 17634-2021 Electronic cigarettes and e-liquids - Determination of nicotine delivery consistency over defined puff sequences of a number of e-cigarettes of identical type
  • EN 13025-1:2005 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml

Danish Standards Foundation, large metallographic

  • DS/ISO 23472-3:2021 Foundry machinery – Vocabulary – Part 3: Die casting machines and other equipment related to permanent mold casting process
  • DS/EN 13025-1:2006 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml

KR-KS, large metallographic

  • KS B ISO 9692-3-2019 Welding and allied processes — Types of joint preparation — Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys

Lithuanian Standards Office , large metallographic

  • LST EN 13025-1-2005 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml

  Metallographic, Metallographic, Metallographic, Metallographic measurement, Large Metallographic Microscope, metallographic technique, Metallographic grain, Metallographic examination, Metallographic testing, metallographic polishing metallographic, Metallography and metallography, Small Large Metallographic Microscope, Metallographic, Metallographic structure, Metallographic structure, large metallographic, Metallographic microscope, How to use a large metallographic microscope, Metallographic low magnification Metallographic high magnification, large metallographic.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved