ZH
RU
ES

Temperature field picture

Temperature field picture, Total:326 items.

In the international standard classification, Temperature field picture involves: Soil quality. Pedology, Earthworks. Excavations. Foundation construction. Underground works, Petroleum products in general, Construction materials, Cinematography, Thermodynamics and temperature measurements, Lamps and related equipment, Document imaging applications, Analytical chemistry, Photography, Equipment for entertainment, Graphical symbols, Components and accessories for telecommunications equipment, Pipeline components and pipelines, Rubber and plastics products, Testing of metals, Environmental protection, Astronomy. Geodesy. Geography, Optical equipment, Resistors, Integrated circuits. Microelectronics, Electricity. Magnetism. Electrical and magnetic measurements, Optics and optical measurements, Audio, video and audiovisual engineering, Electrical accessories, Seals, glands, Plastics, Textile fibres, Kitchen equipment, Medical equipment, Applications of information technology, Valves, Fluid power systems, Alarm and warning systems, Welding, brazing and soldering, Technical drawings, Construction of airports, Non-destructive testing, Ceramics, Nuclear energy engineering, Energy and heat transfer engineering in general, Protection of and in buildings, Semiconductor devices, Iron and steel products, Installations in buildings, Transport, Refractories, Fluid storage devices, Refrigerating technology, Mechanical testing, Geology. Meteorology. Hydrology, Rubber, Aerospace electric equipment and systems, Graphic technology, Fasteners.


ES-AENOR, Temperature field picture

PL-PKN, Temperature field picture

  • PN N84455-1992 Photography Slide projectors Determination of temperature rise in the picture area using a glass sandwich test slide

RU-GOST R, Temperature field picture

  • GOST 25358-1982 Soils. Field method of determining temperature
  • GOST 25358-2012 Soils. Field method of determining temperature
  • GOST 27428-1987 Standart method of measuring the pinch temperature of quarts-tungsten-halogen lamps
  • GOST 8.558-1993 State system for ensuring the uniformity of measurements. State verification schedule for means measuring temperature
  • GOST R 52728-2007 Method of strain-and-temperature measurements in situ. General requirements
  • GOST 17706-1983 Projectors and projection units for 70-, 35- and 16-mm motion pictures. Dimensions and position of projectable image areas. Control methods
  • GOST 25704-1983 Film materials. Image areas and sound records. Magnetic tracks. Dimensions and position. Control methods
  • GOST 9877-1973 Television program backing - 35 mm usual size cinematograph film. Dimensions and dispositions of fields of images and of photographic sound records
  • GOST 8.188-1985 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring magnetic induction of constant field in the range of 2-10 T for temperature range from 4,2 to 300 K and from 0,1 up to
  • PNST 44-2015 Renewable power engineering. Solar energy. Calibration of field pyrheliometers by comparison to a reference pyrheliometer
  • GOST R 58031-2017 Design and execution rules site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above

GOSTR, Temperature field picture

  • GOST 25358-2020 Soils. Field method of determining the temperature
  • GOST R 58888-2020 Soils. Field test method with the use of cone penetration with temperature measurement
  • GOST R 59242-2020 Buildings and constructions. Calculation of temperature field nodes of enclosing structures

Professional Standard - Chemical Industry, Temperature field picture

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Temperature field picture

  • GB 8023-1987 Liquid petroleum product viscosity temperature calculation chart
  • GB/T 8023-1987 Liquid petroleum products--Viscosity--Temperature charts
  • GB/T 22307-2008 Standard test method for compressive strength of gasket at elevated temperatures
  • GB 936-1989 Colour TV receiver－Colour temperature of white point－Reference white and it's tolerance
  • GB/T 936-1989 Colour TV receiver--Colour temperature of white point--Reference white and it's tolerance
  • GB/T 41792-2022 Plastics—Film and sheeting—Determination of cold-crack temperature
  • GB/T 20831-2007 Methods of assessment of temperature capability of inter laminar insulation coatings of electrical sheet and strip
  • GB/T 18021-2000 In-situ measurements of heat loss through thermal insulation of equipments and pipes-Surface temperature method
  • GB/T 41872-2022 Heat exchanger for refrigerating systems and heat pumps—Performance test and evaluation method based on three-field synergy of temperature, pressure and velocity fields
  • GB/T 17357-2008 In-situ measurements of heat loss through thermal insulation of equipments and pipes. Heat flow meter apparatus and surface temperature method
  • GB/T 20028-2005 Rubber,vulcanized or thermoplastic.Estimation of life-time and maximum temperature of use from an Arrhenius plot
  • GB/T 23901.5-2009 Non-destructive testing.Image quality of radiographs.Part 5:Image quality indicators(duplex wire type).Determination of image unsharpness value

American Welding Society (AWS), Temperature field picture

  • WRC 575:2019 Revisiting the Bree Diagram: Derivation with Temperature Dependent Properties
  • AWS PHSS WC& DC-1996 Suggested Pretemperatures for Welding Structural Steel Materails Wall and Desk Charts
  • AWS PHSP WC& DC-1996 Suggester Filler Materials and Minimum Preheat Temperatures for Welding Steel Pipe with Wall Thickness Less than 3/4", Wall and Desk Charts

American Society for Testing and Materials (ASTM), Temperature field picture

  • ASTM D2493/D2493M-16 Standard Practice for Viscosity-Temperature Chart for Asphalt Binders
  • ASTM D341-09 Standard Practice for Viscosity-Temperature Charts for Liquid Petroleum Products
  • ASTM D341-17 Standard Practice for Viscosity-Temperature Charts for Liquid Petroleum Products
  • ASTM D341-93(1998) Standard Test Method for Viscosity-Temperature Charts for Liquid Petroleum Products
  • ASTM E988-96 Standard Temperature-Electromotive Force (EMF) Tables for Tungsten-Rhenium Thermocouples
  • ASTM E988-96(2002) Standard Temperature-Electromotive Force (EMF) Tables for Tungsten-Rhenium Thermocouples
  • ASTM F1574-03a(2009) Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures
  • ASTM F874-98(2003) Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors
  • ASTM F874-98 Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors
  • ASTM D1790-21 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
  • ASTM F1574-03a(2017) Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures
  • ASTM E230-98 Standard Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples
  • ASTM E230-98e1 Standard Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples
  • ASTM E230-03 Standard Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples
  • ASTM E230/E230M-12 Standard Specification and Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples
  • ASTM E230/E230M-11 Standard Specification and Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples
  • ASTM C1273-05 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
  • ASTM C1273-05(2010) Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
  • ASTM E2488-09 Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison
  • ASTM F874-98(2008) Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors
  • ASTM F874-98(2014) Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors
  • ASTM C1046-95 Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
  • ASTM D341-20 Standard Practice for Viscosity-Temperature Equations and Charts for Liquid Petroleum or Hydrocarbon Products
  • ASTM D341-20e1 Standard Practice for Viscosity-Temperature Equations and Charts for Liquid Petroleum or Hydrocarbon Products
  • ASTM B114-07(2018) Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
  • ASTM C1046-95(2001) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
  • ASTM C1046-95(2007) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
  • ASTM C1046-95(2013) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
  • ASTM E1949-03 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
  • ASTM E1949-03(2014) Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
  • ASTM E1949-03(2014)e1 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
  • ASTM E1949-21 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
  • ASTM C1046-95(2021) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Temperature field picture

  • ASHRAE DA-00-3-5-2000 Impact of Heating Systems and Wall Surface Temperatures on Room Operative Temperature Fields
  • ASHRAE 3901-1995 Experimental Study of Temperature@ Pressure@ Humidity@ and/or Density Effects on Vane Anemometers
  • ASHRAE PH-97-6-3-1997 Investigations of the EPA Refrigerator Analysis (ERA) Software: Compressor Map and Ambient Temperature Effects
  • ASHRAE SA-96-10-4-1996 Field Experiences in Residential Humidification Control with Temperature-Compensated Automatic Humidistats
  • ASHRAE HI-02-6-4-2002 Field Measurements of Operative Temperatures in Buildings Heated or Cooled by Embedded Water-Based Radiant Systems

RO-ASRO, Temperature field picture

  • STAS 11071/14-1988 Block diagrams of hierarchy NBLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTSFOR TEMPERATURE
  • STAS 11200/533-1979 GRAPHICAL SYMBOLS Graphical symbol for engine coolant temperature

British Standards Institution (BSI), Temperature field picture

  • BS ISO 17266:2002 Cinematography - Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives - Position and width dimensions
  • BS ISO 19012-1:2013 Microscopes. Designation of microscope objectives. Flatness of field/Plan
  • BS 4044:1989 Methods for determination of fibre length by comb sorter diagram
  • DD IEC/TS 62306:2006 Ultrasonics. Field characterisation. Test objects for determining temperature elevation in diagnostic ultrasound fields
  • BS DD IEC/TS 62306:2008 Ultrasonics - Field characterisation - Test objects for determining temperature elevation in diagnostic ultrasound fields
  • BS ISO 17744:2004 Plastics - Determination of specific volume as a function of temperature and pressure (pVT diagram) - Piston apparatus method
  • BS ISO 7187:1996 Photography - Materials for direct-positive colour-print cameras - Determination of ISO speed
  • BS EN 62373:2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET)
  • BS EN 14015:2004(2005) Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
  • BS EN ISO 19232-5:2018 Tracked Changes. Non-destructive testing. Image quality of radiographs. Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators
  • 17/30350291 DC BS EN 14015. Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
  • BS 2782-1 Method 150D:1976 Methods of testing plastics - Thermal properties - Cold crack temperature of film and thin sheeting
  • BS ISO 14705:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for hardness of monolithic ceramics at room temperature
  • BS EN 843-4:2005 Advanced technical ceramics — Mechanical properties of monolithic ceramics at room temperature — Part 4: Vickers, Knoop and Rockwell superficial hardness
  • BS EN 843-4:2007 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Vickers, Knoop and Rockwell superficial hardness
  • BS EN ISO 19232-5:2013 Non-destructive testing. Image quality of radiographs. Determination of the image unsharpness value using duplex wire-type image quality indicators
  • BS ISO 8126:2019 Tracked Changes. Micrographics. Duplicating film, silver, diazo and vesicular. Specifications and measurement for visual density
  • BS EN 843-1:2007 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Determination of flexural strength
  • BS EN 843-1:2006 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength
  • BS ISO 12647-2:1997 Graphic technology - Process control for the manufacture of half-tone colour separations, proof and production prints - Offset lithographic processes
  • BS EN 2591-218:2002 Elements of electrical and optical connection - Test methods - Ageing of terminal lugs and in-line splices by temperature and current cycling

AR-IRAM, Temperature field picture

未注明发布机构, Temperature field picture

  • BS 1794:1952(1999) Specification for Chart ranges for temperature recording instruments
  • BS EN 462-5:1996 Non - destructive testing - Image quality of radiographs Part 5. Image quality indicators ( duplex wire type ), determination of image unsharpness value

Group Standards of the People's Republic of China, Temperature field picture

  • T/SJZJLXH 0003-2018 Calibration specification for on-site temperature detection system
  • T/SJZJLXH 0011-2020 Calibration specification for on-site temperature detection system
  • T/CASAS 013-2021 Measuring method for testing the density of dislocation in SiC crystal Combined KOH etching and image recognition methods
  • T/SDAS 2-2016 QY steel wire grid (sheet) integrated slab cast-in-place concrete composite thermal insulation system building standard design atlas
  • T/SHJX 022-2021 Vehicle infrastructure cooperative systems technical requirements of high-precision maps for vehicle-road collaboration application scenarios
  • T/SICA 003-2022 Technical specification for dual-frequency multi-interface temperature and humidity detection tag chip based on RFID transmission and storage technology

German Institute for Standardization, Temperature field picture

  • DIN 16196:1991 Dial indicating thermometers with electrical limit contact devices; filled system thermometers and bimetallic-thermometers
  • DIN 16196:2015 Dial indicating thermometers with electrical limit contact devices - Filled system thermometers and bimetallic thermometers
  • DIN 16196:2013 Dial indicating thermometers with electrical limit contact devices - Filled system thermometers and bimetallic thermometers
  • DIN 19046-3:1981 Stage and theatre projection for still picture (slides), slow running picture and motion-picture; stage lighting and projection in scenery
  • DIN 19045-3:1998-12 Projection of still pictures and motion-pictures - Part 3: Minimum dimensions for elements, width of lines, dimensions of lettering and graphical symbols in originals for projection
  • DIN 51866-1:2000 Temperature measurement - Part 1: Survey of laser spectroscopic methods
  • DIN 19045-3:1998 Projection of still pictures and motion-pictures - Part 3: Minimum dimensions for elements, width of lines, dimensions of lettering and graphical symbols in originals for projection
  • DIN 19045-9:1993 Projection of still pictures and motion-pictures; light measurements of projection units
  • DIN EN 62373:2007 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) (IEC 62373:2006); German version EN 62373:2006
  • DIN EN 14015:2017 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above; German and English version prEN 14015:2017
  • DIN EN 62373:2007-01 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) (IEC 62373:2006); German version EN 62373:2006
  • DIN EN ISO 19232-5:2018-12 Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators (ISO 19232-5:2018); German version EN ISO 19232-5:2018
  • DIN EN 14015:2005-02 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above; German version EN 14015:2004 / Note: To be replaced by DIN ...
  • DIN 19021-2:1985 Evaluation of still projectors with incandescent lamps; measurement of temperature in the picture area of slides
  • DIN EN ISO 19232-5:2018 Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators (ISO 19232-5:2018)
  • DIN EN 843-1:2008 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength; English version of DIN EN 843-1:2008-08
  • DIN 19021-3:1987 Evaluation of still projectors with incandescent lamps; measurement of temperature in the projection area of overhead projectors
  • DIN EN 843-1:2008-08 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength; German version EN 843-1:2006
  • DIN EN 820-1:2003 Advanced technical ceramics - Methods of testing monolithic ceramics; Thermo-mechanical properties - Part 1: Determination of flexural strength at elevated temperatures; German version EN 820-1:2002
  • DIN EN 3774-006:2023-06 Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A - Part 006: 6,3 blade terminal - Product standard; German version ASD-STAN prEN 3774-006:2023 / Note: Date of issue 2023-05-05

Professional Standard - Aerospace, Temperature field picture

  • QJ 1138-1987 Ablation of silicon-based materials—calculation method of temperature field
  • QJ 1409-1988 Calculation method and computer program for temperature field of solid rocket motor nozzle

Korean Agency for Technology and Standards (KATS), Temperature field picture

  • KS A ISO 6036-2003(2018) Cinematography -- Colour motion-picture prints and slides for television -- Density specifications
  • KS X 5908-2009 Resolution test chart for microfilming-description and use in photographic documentary reproduction
  • KS M ISO 8570:2014 Plastics — Films and sheeting — Determination of cold-crack temperature
  • KS M ISO 8570-2014(2019) Plastics — Films and sheeting — Determination of cold-crack temperature
  • KS X 5912-2009(2020) Density of silver-gelatin type microfilms for micrographics
  • KS M 3038-2006(2011) Test method for tensile heat distortion temperature of plastic sheeting
  • KS C 6200-2018 Environmental test methods for robust image quality in video surveillance systems - temperature and humidity
  • KS C IEC 61224-2012(2022) Nuclear reactors－Response time in resistance temperature detectors(RTD)－In situ measurements
  • KS C IEC 61224-2012(2017) Nuclear reactors－Response time in resistance temperature detectors(RTD)－In situ measurements
  • KS M 3005-2002(2022) Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis
  • KS A ISO 6-2007(2022) Photography－Black－and－white pictorial still camera negative film/process systems－Determination of ISO speed
  • KS L 1599-2001(2021) Fine ceramics(advanced ceramics, advanced technical ceramics)－Test methodfor tensile strength of monolithic ceramics at room and elevated temperature
  • KS L 1599-2001(2016) Fine ceramics(advanced ceramics, advanced technical ceramics)－Test methodfor tensile strength of monolithic ceramics at room and elevated temperature
  • KS M 3005-2002(2017) Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis
  • KS A ISO 6:2007 Photography－Black－and－white pictorial still camera negative film/process systems－Determination of ISO speed
  • KS B ISO 19232-5:2021 Non-destructive testing — Image quality of radiographs —Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators
  • KS B ISO 13653-2006(2021) Optics and optical instruments — General optical test methods —Measurement of relative irradiance in the image field
  • KS B ISO 13653-2006(2016) Optics and optical instruments — General optical test methods —Measurement of relative irradiance in the image field
  • KS L 1601-2006(2016) Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for compressive strength of monolithicceramics at room temperature
  • KS L ISO 17565-2006(2016) Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for flexural strength of monolithic ceramics at elevated temperature
  • KS B ISO 19232-5:2005 Non-destructive testing-Image quality of radiographs-Part 5:Image quality indicators(duplex wire type)-Determination of image unsharpness value
  • KS L 1601-2006(2021) Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for compressive strength of monolithicceramics at room temperature
  • KS L ISO 14705:2018 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature

Defense Logistics Agency, Temperature field picture

Association Francaise de Normalisation, Temperature field picture

  • NF T60-148:1976 VISCOSITY-TEMPERATURE CHARTS FOR LIQUID PETROLEUM PRODUCTS.
  • NF C96-051*NF EN 62373:2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET)
  • NF EN 62373:2006 Essai de stabilité de température en polarisation pour transistors à effet de champ métal-oxyde-semiconducteur (MOSFET)
  • NF A09-205-5*NF EN ISO 19232-5:2018 Non-destructive testing - Image quality of radiographs - Part 5 : determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators
  • NF EN 14015:2005 Spécification pour la conception et la fabrication de réservoirs en acier, soudés, aériens, à fond plat, cylindriques, verticaux, construits sur site destinés au stockage des liquides à la température ambiante ou supérieure
  • NF M88-531-1*NF EN 14620-1:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0oC and -165oC - Part 1 : general
  • NF B43-362:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature
  • NF B41-206:1995 Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature. Part 1 : determination of flexural strength.
  • NF M88-531-4*NF EN 14620-4:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 oC and -165 oC - Part 4 : insulation components.
  • NF M88-531-2*NF EN 14620-2:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0oC and -165oC - Part 2 : metallic components
  • NF M88-531-3*NF EN 14620-3:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0oC and -165oC - Part 3 : concrete components
  • NF B41-206-1*NF EN 843-1:2007 Advenced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1 : determination of flexural strength
  • NF EN 843-1:2007 Céramiques techniques avancées - Propriétés mécaniques des céramiques monolithiques à température ambiante - Partie 1 : détermination de la résistance à la flexion
  • NF P84-102*NF EN 1108:1999 Flexible sheets for waterprooffing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclic temperature change
  • NF M88-531-5*NF EN 14620-5:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0oC and -165oC - Part 5 : testing, drying, purging and cool-down
  • NF A09-212:1984 Industrial radiography. Determination of the speed and average gradient of film-based image receiving systems for use in the energy range from 50 keV to 300 keV.
  • NF A09-211:1984 Industrial radiography. Determination of the speed and average gradient of film-based image receiving systems for use in the energy range from 300 keV to 1,5 meV with iridium 192.
  • NF R10-304:1994 Véhicules routiers - Détermination du niveau de puissance acoustique des groupes frigorifiques équipant les engins de transport de marchandises à température dirigée - Classe expertise.

SE-SIS, Temperature field picture

Taiwan Provincial Standard of the People's Republic of China, Temperature field picture

  • CNS 15091-1-2007 Method of test for deep sea water - Measurement of in-situ temperature

Indonesia Standards, Temperature field picture

Professional Standard - Electron, Temperature field picture

  • SJ 2534.7-1986 Test procedures for antennas--On-site measurements of amplitude pattens

IT-UNI, Temperature field picture

HU-MSZT, Temperature field picture

Professional Standard - Aviation, Temperature field picture

  • HB 6219-1989 The installation of aircraft guns requires the protection of the muzzle shock wave pressure field and temperature field

International Organization for Standardization (ISO), Temperature field picture

  • ISO 2910:2018 Cinematography - Screen luminance and chrominance for the projection of film motion pictures
  • ISO 19012-1:2011 Microscopes - Designation of microscope objectives - Part 1: Flatness of field/Plan
  • ISO 19012-1:2013 Microscopes.Designation of microscope objectives .Part 1: Flatness of field/Plan
  • ISO 8538:1999 Aerospace - Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
  • ISO/CD 17744:2023 Plastics — Determination of specific volume as a function of temperature and pressure, pvT diagram — Piston apparatus method
  • ISO 17744:2004 Plastics - Determination of specific volume as a function of temperature and pressure (pvT diagram) - Piston apparatus method
  • ISO 13653:2019 Optics and photonics — General optical test methods — Measurement of relative irradiance in the image field
  • ISO 10059-2:2003 Dense, shaped refractory products - Determination of cold compressive strength - Part 2: Test with packing
  • ISO 10059-1:1992 Dense, shaped refractory products; determination of cold compressive strength; part 1: referee test without packing
  • ISO 162:1975 Cinematography — Recording and reproducing head gaps for three magnetic sound records on 35 mm motion-picture film containing no picture — Positions and width dimensions
  • ISO 360:1975 Cinematography — Recording and reproducing head gaps for four magnetic sound records on 35 mm motion-picture film containing no picture — Positions and width dimensions
  • ISO 1753:1975 Cinematography — Recording and reproducing head gaps for six-track magnetic sound records on 35 mm motion-picture film containing no picture — Positions and width dimensions
  • ISO 14705:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature
  • ISO 14704:2008 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature
  • ISO 14704:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature

National Metrological Technical Specifications of the People's Republic of China, Temperature field picture

  • JJF 1184-2007 Testing Specification of Temperature Uniformity in Thermocouple Calibration Furnaces

中华人民共和国国家卫生和计划生育委员会, Temperature field picture

民政部, Temperature field picture

  • MZ/T 066-2016 On-site identification of winter wheat low temperature and freezing damage degree

Standard Association of Australia （SAA）, Temperature field picture

  • AS 3894.7:2002(R2013)
  • AS 4032.3:2004 Water supply - Valves for the control of hot water supply temperatures - Requirements for field testing, maintenance or replacment of thermostatic mixing valves, tempering valves and end of line temperature control devices

国家能源局, Temperature field picture

  • NB/T 10308-2019 Infrared temperature field distribution test method for electric heating elements

ZA-SANS, Temperature field picture

  • SANS 4044:2007 Methods for determination of fibre length by comb sorter diagram
  • SANS 11346:2003 Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use from an Arrhenius plot

American National Standards Institute （ANSI), Temperature field picture

  • ANSI/ASTM E230:2012 Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples
  • ANSI PH2.50-1983 Photography - Direct-Exposure Medical and Dental Radiographic Film/Process Combinations - Determination of ISO Speed and Average Gradient

Danish Standards Foundation, Temperature field picture

  • DS/IEC/TS 62306:2007 Ultrasonics - Field characterisation - Test objects for determining temperature elevation in diagnostic ultrasound fields
  • DS/EN ISO 19232-5:2013 Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness value using duplex wire-type image quality indicators
  • DS/EN 14015:2005 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
  • DS/EN 62373:2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET)

Association of German Mechanical Engineers, Temperature field picture

  • VDI/VDE 2650 Blatt 5-2006 Requirements regarding self-monitoring and diagnosis in field instumentation - Temperature measurement

工业和信息化部, Temperature field picture

  • JB/T 13778-2020 Positive temperature coefficient thermistor chip for compressor starter

Professional Standard - Civil Aviation, Temperature field picture

  • MH 5022-2005 The compiling content and depth demand For detail design documents of civil airport project

Lithuanian Standards Office , Temperature field picture

  • LST EN 462-5-2001 Non-destructive testing - Image quality of radiographs - Part 5: Image quality indicators (duplex wire type), determination of image unsharpness value
  • LST EN 14015-2005 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
  • LST EN 62373-2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) (IEC 62373:2006)

Liaoning Provincial Standard of the People's Republic of China, Temperature field picture

  • DB21/T 2838-2017 On-site test method for core material thickness of polymer waterproof material composite sheet (FS2)

SAE - SAE International, Temperature field picture

  • SAE AS21-1941 Symbols and Sketches for Pressures and Temperatures in Induction System - Aircraft Engine
  • SAE AS21004A-2014 TERMINAL, LUG, UNINSULATED, RECTANGULAR TONGUE, CRIMP STYLE, COPPER, TYPE I, CLASS 1, FOR 150 °C TOTAL CONDUCTOR TEMPERATURE
  • SAE AS21004B-2016 TERMINAL, LUG, UNINSULATED, RECTANGULAR TONGUE, CRIMP STYLE, COPPER, TYPE I, CLASS 1, FOR 150 °C TOTAL CONDUCTOR TEMPERATURE
  • SAE AS21004C-2016 TERMINAL@ LUG@ UNINSULATED@ RECTANGULAR TONGUE@ CRIMP STYLE@ COPPER@ TYPE I@ CLASS 1 FOR 175 °C TOTAL CONDUCTOR TEMPERATURE
  • SAE AS7928/4-A1-2004 Terminals@ Lug and Splices@ Conductor@ Crimp Style@ Copper Terminal@ Lug@ Insulated@ Ring Tongue@ Bell-Mouthed@ Type II@ Class 1 (for 150 Degrees C Total Conductor Temperature)
  • SAE AS7928/1A-A1-2004 Terminals@ Lug and Splices@ Conductor@ Crimp Style@ Copper Terminal@ Lug@ Crimp Style@ Copper@ Insulated@ Ring Tongue@ for Thin Wall Wire@ Type II Class 1 for 105 Degrees C Total Conductor Temperature
  • SAE AS7928/1A-1999 Terminals@ Lug and Splices@ Conductor@ Crimp Style@ Copper Terminal@ Lug@ Crimp Style@ Copper@ Insulated@ Ring Tongue@ for Thin Wall Wire@ Type II Class 1 for 105 Degrees C Total Conductor Temperature
  • SAE AS7928/1-1999 Terminals@ Lug and Splices@ Conductor@ Crimp Style@ Copper Terminal@ Lug@ Crimp Style@ Copper@ Insulated@ Ring Tongue@ for Thin Wall Wire@ Type II Class 1 for 150 Degrees C Total Conductor Temperature
  • SAE AS25036A-A1-2008 Terminal@ Lug@ Crimp Style@ Copper@ Insulated@ Ring Tongue@ Bell-Mouthed@ Type II@ Class 1 (for 105 °C Total Conductor Temperature)
  • SAE AS7928/4C-2015 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, INSULATED, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 150 °C TOTAL CONDUCTOR TEMPERATURE)
  • SAE AS7928/2C-2016 TERMINALS@ LUG AND SPLICES@ CONDUCTOR@ CRIMP STYLE@ COPPER@ INSULATED@ RECTANGULAR TONGUE@ FOR THIN WALL WIRE@ TYPE II@ CLASS 1 FOR 105 C TOTAL CONDUCTOR TEMPERATURE
  • SAE AS25036D-2012 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ INSULATED@ RING TONGUE@ BELL-MOUTHED@ TYPE II@ CLASS 1 (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE)
  • SAE AS25036C-2011 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ INSULATED@ RING TONGUE@ BELL-MOUTHED@ TYPE II@ CLASS 1 (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE)
  • SAE AS25036E-2015 Terminal, Lug, Crimp Style, Copper, Insulated, Ring Tongue, Bell-Mouthed, Type II, Class 1, (For 105°C Total Conductor Temperature)
  • SAE AS7928/11C-2015 Terminal, Lug, Crimp Style, copper, Uninsulated, Ring Tongue, Tin Whisker Resistant, Type I, Class I, for 175 °C Total conductor Temperature
  • SAE AS7928/11B-2011 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ UNINSULATED@ RING TONGUE@ TIN WHISKER RESISTANT@ TYPE I@ CLASS I@ FOR 175 °C TOTAL CONDUCTOR TEMPERATURE
  • SAE AS7928/11A-2010 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ UNINSULATED@ RING TONGUE@ TIN WHISKER RESISTANT@ TYPE I@ CLASS I@ FOR 175 °C TOTAL CONDUCTOR TEMPERATURE
  • SAE AS7928/2A-1999 Terminals@ Lug and Splices@ Conductor@ Crimp Style@ Copper@ Insulated@ Rectangular Tongue@ for Thin Wall Wire@ Type II@ Class 1 for 105 Degrees C Total Conductor Temperature
  • SAE AS7928/2A-A1-2004 Terminals@ Lug and Splices@ Conductor@ Crimp Style@ Copper@ Insulated@ Rectangular Tongue@ for Thin Wall Wire@ Type II@ Class 1 for 105 Degrees C Total Conductor Temperature
  • SAE AS7928/2-1999 Terminals@ Lug and Splices@ Conductor@ Crimp Style@ Copper@ Insulated@ Rectangular Tongue@ for Thin Wall Wire@ Type II@ Class 1 for 150 Degrees C Total Conductor Temperature
  • SAE AS7928/12-A1-2008 Terminal@ Lug@ Crimp Style@ Copper@ Insulated@ Ring Tongue@ Bell-Mouthed@ Tin Whisker@ Type II@ Class 1@ (for 105 °C Total Conductor Temperature)
  • SAE AS7928/12D-2015 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ INSULATED@ RING TONGUE@ BELL-MOUTHED@ TIN WHISKER@ TYPE II@ CLASS 1@ (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE)
  • SAE AS7928/12C-2012 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ INSULATED@ RING TONGUE@ BELL-MOUTHED@ TIN WHISKER@ TYPE II@ CLASS 1@ (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE)
  • SAE AS7928/12A-2010 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ INSULATED@ RING TONGUE@ BELL-MOUTHED@ TIN WHISKER RESISTANT@ TYPE II@ CLASS 1@ (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE)
  • SAE AS7928/12B-2011 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ INSULATED@ RING TONGUE@ BELL-MOUTHED@ TIN WHISKER RESISTANT@ TYPE II@ CLASS 1@ (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE)
  • SAE AS7928/12-2007 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ INSULATED@ RING TONGUE@ BELL-MOUTHED@ TIN WHISKER@ TYPE II@ CLASS 1@ (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE)

Society of Automotive Engineers (SAE), Temperature field picture

  • SAE AS21-1995 Symbols and Sketches for Pressures and Temperatures in Induction System - Aircraft Engine
  • SAE AS20659B_A1-2008 Terminal, Lug, Crimp Style, Copper, Uninsulated, Ring Tongue, Type I, Class I, for 175°C Total Conductor Temperature
  • SAE AS20659A_A1-2004 Terminal, Lug, Crimp Style, Copper, Uninsulated, Ring Tongue, type I, Class I, for 175°C Total Conductor Temperature
  • SAE AS17143-2012 TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, TYPE II, CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
  • SAE AS17143B-2020 TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, TYPE II, CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
  • SAE AS21004E-2023 TERMINAL, LUG, UNINSULATED, RECTANGULAR TONGUE, CRIMP STYLE, COPPER, TYPE I, CLASS 1, FOR 150 °C TOTAL CONDUCTOR TEMPERATURE
  • SAE AS21004D-2022 TERMINAL, LUG, UNINSULATED, RECTANGULAR TONGUE, CRIMP STYLE, COPPER, TYPE I, CLASS 1, FOR 150 °C TOTAL CONDUCTOR TEMPERATURE
  • SAE AS7928/11_A1-2008 Terminal, Lug, Crimp Style, Copper, Uninsulated, Ring Tongue, Tin Whisker Resistant, Type I, Class I, for 175 °C Total Conductor Temperature
  • SAE AS7928/7-2011 TERMINAL LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, TERMINAL LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE TYPE I, CLASS 1 FOR 175°C TOTAL CONDUCTOR TEMPERATURE
  • SAE AS7928/4_A1-2004 Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Insulated, Ring Tongue, Bell-Mouthered, Type II, Class 1 (for 105°C Total Conductor Temperature)
  • SAE AS25036A_A1-2008 Terminal, Lug, Crimp Style, Copper, Insulated, Ring Tongue, Bell-Mouthed, Type II, Class 1 (for 105 °C Total Conductor Temperature)
  • SAE AS7928/1A_A1-2004 Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Crimp Style, Copper, Insulated, Ring Tongue, for Thin Wall Wire, Type II Class 1 for 150°C Total Conductor Temperature
  • SAE AS7928/4C-2020 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, INSULATED, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 150 °C TOTAL CONDUCTOR TEMPERATURE)
  • SAE AS7928/2B-2007 (R) TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, FOR THIN WALL WIRE, TYPE II, CLASS 1 FOR 105 °C TOTALCONDUCTOR TEMPERATURE
  • SAE AS25036A-2007 Terminal, Lug, Crimp Style, Copper, Insulated, Ring Tongue, Bell-Mouthed, Type II, Class 1, (For 105°C Total Conductor Temperature)
  • SAE AS25036B-2010 Terminal, Lug, Crimp Style, Copper, Insulated, Ring Tongue, Bell-Mouthed, Type II, Class 1, (For 105°C Total Conductor Temperature)
  • SAE AS1426C-1998 TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE, TYPE I, CLASS I, FOR 175°C TOTAL CONDUCTOR TEMPERATURE
  • SAE AS7928/11-2007 Terminal, Lug, Crimp Style, copper, Uninsulated, Ring Tongue, Tin Whisker Resistant, Type I, Class I, for 175 °C Total conductor Temperature
  • SAE AS25036-2004 TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1, (FOR 105°C TOTAL CONDUCTOR TEMPERATURE)
  • SAE AS7928/12_A1-2008 Terminal, Lug, Crimp Style, Copper, Insulated, Ring Tongue, Bell-Mouthed, Tin Whisker, Type II, Class 1 (for 105 °C Total Conductor Temperature)
  • SAE AS25036E-2020 TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE)
  • SAE AS7928/13C-2020 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, INSULATED, TIN WHISKER RESISTANT, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 150 °C TOTAL CONDUCTOR TEMPERATURE)
  • SAE AS7928/13D-2023 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, INSULATED, TIN WHISKER RESISTANT, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 150 °C TOTAL CONDUCTOR TEMPERATURE)
  • SAE AS7928/4A-2009 Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Insulated, Ring Tongue, Bell-Mouthered, Type II, Class 1 (for 150°C Total Conductor Temperature)
  • SAE AS7928/8-2013 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TIN WHISKER RESISTANT, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
  • SAE AS7928/7A-2018 TERMINAL LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, TERMINAL LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE TYPE I, CLASS 1 FOR 175 °C TOTAL CONDUCTOR TEMPERATURE
  • SAE AS7928/8B-2021 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TIN WHISKER RESISTANT, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
  • SAE AS20659F-2017 TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE, TYPE I, CLASS 1, FOR 175 °C OR 260 °C TOTAL CONDUCTOR TEMPERATURE
  • SAE AS7928/11D-2019 TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE, TIN WHISKER RESISTANT, TYPE I, CLASS I, FOR 150 °C TOTAL CONDUCTOR TEMPERATURE
  • SAE AS7928/12E-2020 TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL-MOUTHED, TIN WHISKER RESISTANT, TYPE II, CLASS 1, (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE)
  • SAE AS7928/6_A1-2004 Terminals, Lug and Splices, Conductor, Crimp Style, Splice, Electric, (Permanent, Type II, Class 1) for 150°C Total Conductor Temperature
  • SAE AS7928/12F-2023 TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL-MOUTHED, TIN WHISKER RESISTANT, TYPE II, CLASS 1 (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE)

Society of Motion Picture and Television Engineers (SMPTE), Temperature field picture

  • SMPTE RP 14-1997 Plotting Data from Sensitometric Strips Exposed on Type Ib (Intensity Scale) Sensitometers

Japanese Industrial Standards Committee (JISC), Temperature field picture

  • JIS B 7231:1992 HDTV monitor -- Picture area for 35 mm motion picture filming
  • JIS B 7230:1992 Image area produced by high-definition television (HDTV) on 35 mm motion-picture film -- Position and dimensions
  • JIS K 7196 AMD 1:2012 Testing method for softening temperature of thermoplastic film and sheeting by thermomechanical analysis (Amendment 1)

International Electrotechnical Commission (IEC), Temperature field picture

  • IEC 61224:1993 Nuclear reactors; response time in resistance temperature detectors (RTD); in situ measurements
  • IEC 62373:2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET)
  • IEC TS 62306:2006 Ultrasonics - Field characterisation - Test objects for determination temperature elevation in diagnostic ultrasonic fields

IPC - Association Connecting Electronics Industries, Temperature field picture

  • IPC TM-650 5.5.4.5-1998 Test Coupon C - Circuit Continuity@ Temperature Cycling@ Thermal Cycling@ and Construction Integrity

AENOR, Temperature field picture

  • UNE 40462:1983 TEXTILE FLOOR COVERINGS. BURNING BEHAVIOUR. TABLET TES AT AMBIENT TEMPERATURE
  • UNE-EN ISO 19232-5:2014 Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness value using duplex wire-type image quality indicators (ISO 19232-5:2013)
  • UNE-EN 14015:2005 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above

AWS - American Welding Society, Temperature field picture

  • PHSP WC & DC-1996 "Suggester Filler Materials and Minimum Preheat Temperatures for Welding Steel Pipe with Wall Thickness Less than 3/4""@ Wall and Desk Charts"

KR-KS, Temperature field picture

  • KS B ISO 19232-5-2021 Non-destructive testing — Image quality of radiographs —Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators
  • KS L ISO 14705-2018 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature

BE-NBN, Temperature field picture

(U.S.) Ford Automotive Standards, Temperature field picture

  • FORD WSE-M2D394-A-2009 SILICONE RUBBER (VMQ), HIGH DUROMETER HARDNESS, HIGH TEMPERATURE, GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESE-M2D347-A2-2004 SILICONE RUBBER, HIGH TEMPERATURE - LOW DUROMETER - LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESE-M2D347-A2-2009 SILICONE RUBBER, HIGH TEMPERATURE - LOW DUROMETER - LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSE-M2D399-A3-2009 SILICONE RUBBER (VMQ), MEDIUM HARDNESS, HIGH TEMPERATURE, LOW VOLATILE SILICONE, GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***

Association for Information and Image Management (AIIM), Temperature field picture

  • AIIM MS26-1990 35 mm Planetary Cameras (Top-Light) - Procedures for Determining Illumination Uniformity of Microfilming Engineering Drawings Includes Errata and Amendment 1: 1998
  • AIIM MS9-1987(R1996) Method for Measuring Thickness of Buildup Area on Unitized Microfilm Carriers (Aperture, Camera, Copy, and Image Cards) Addenda - 1996

CEN - European Committee for Standardization, Temperature field picture

  • PREN 14015-2017 Specification for the design and manufacture of site built@ vertical@ cylindrical@ flat-bottomed@ above ground@ welded@ steel tanks for the storage of liquids at ambient temperature and above

ES-UNE, Temperature field picture

  • UNE-EN 62373:2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) (IEC 62373:2006). (Endorsed by AENOR in November of 2006.)
  • UNE-EN ISO 19232-5:2019 Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators (ISO 19232-5:2018)

U.S. Military Regulations and Norms, Temperature field picture

  • ARMY MIL-PRF-55365 G (2)-2008 CAPACITOR, FIXED, ELECTROLYTIC (TANTALUM), CHIP, ESTABLISHED RELIABILITY, NONESTABLISHED RELIABILITY, AND HIGH RELIABILITY, GENERAL SPECIFICATION FOR

European Committee for Electrotechnical Standardization（CENELEC）, Temperature field picture

  • EN 62373:2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET)

ANSI - American National Standards Institute, Temperature field picture

  • IT2.40-2003 Approved American National Standard for Photography Root Mean Square (rms) Granularity of Film (Images on One Side Only) Method for Measuring

European Committee for Standardization (CEN), Temperature field picture

  • prEN 843-1-1992 Advanced technical ceramics; mechanical properties of monolithic ceramics at room temperature; part 1: determination of flexural strength
  • EN 843-6:2009 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 6: Guidance for fractographic investigation
  • EN 14015:2004 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
  • EN 2997-002:2016 Aerospace series - Connectors@ electrical@ circular@ coupled by threaded ring@ fire-resistant or non fire-resistant@ operating temperatures - 65 ��to 175 ��continuous@ 200 ��continuous@ 260 ��peak - Part 002: Specification of performance and contact arran
  • EN 843-5:2006 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 5: Statistical analysis

CN-QIYE, Temperature field picture

  • Q/GDW 381.10-2011 State Grid Corporation of China power transmission and transformation project construction drawing design content depth regulation? Part 10: Wind farm booster station

European Association of Aerospace Industries, Temperature field picture

  • AECMA PREN 4126-1994 Aerospace Series Nuts, Anchor, Self-Locking, Floating, Two Lug, Reduced Series, with Incremental Counterbore, in Heat Resisting Steel, MoS2 Lubricated Classification: 900 MPa (at Ambient Temperature) /315 Degrees C Edition P1

  picture, best picture, picture ratio, Analyze pictures, Temperature field test picture, picture ruler, Image analysis, format picture, image processing, Equipment pictures, opposite picture, group pictures, software image, data picture, image application, image value, standard picture, picture instrument, picture strip, Temperature field picture.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved