ZH
RU
ES

The relative molecular mass of the ion

The relative molecular mass of the ion, Total:433 items.

In the international standard classification, The relative molecular mass of the ion involves: Analytical chemistry, Crude petroleum, Water quality, Petroleum products in general, Spices and condiments. Food additives, Products of the chemical industry, Non-ferrous metals, Fuels, Milk and milk products, Animal feeding stuffs, Soil quality. Pedology, Beverages, Microbiology, Ferrous metals, Inorganic chemicals, Plastics, Organic chemicals, Radiation measurements, Air quality, Products of non-ferrous metals, Metalliferous minerals, General methods of tests and analysis for food products, Nuclear energy engineering, Semiconductor devices, Meat, meat products and other animal produce, Photography, Testing of metals, Powder metallurgy, Laboratory medicine, Medical equipment, Electronic display devices, Materials and articles in contact with foodstuffs, Safety of machinery, Electrical and electronic testing, Natural gas, Food products in general, Glass, Agricultural machines, implements and equipment, Surface treatment and coating, Pharmaceutics, Electrical engineering in general, Road vehicle systems, Geology. Meteorology. Hydrology, Shafts and couplings, Environmental protection, Waxes, bituminous materials and other petroleum products, Fertilizers.


Korean Agency for Technology and Standards (KATS), The relative molecular mass of the ion

  • KS D ISO 18114-2005(2020) Surface chemical analysis－Secondary-ion mass spectrometry－Determination of relative sensitivity factors from ion-implanted reference materials
  • KS D ISO 18114:2005 Surface chemical analysis－Secondary-ion mass spectrometry－Determination of relative sensitivity factors from ion-implanted reference materials
  • KS M ISO 2871-2007(2022) Surface active agents－Detergents－Determination of cationic-active matter content－High-molecular-mass cationic-active matter
  • KS M ISO 2871-2007(2017) Surface active agents－Detergents－Determination of cationic-active matter content－High-molecular-mass cationic-active matter
  • KS M ISO 2871-2-2007(2017) Surface active agents－Detergents－Determination of cationic-active matter content－Cationic-active matter of low molecular mass(between 200 and 500)
  • KS M ISO 2871-2-2007(2022) Surface active agents－Detergents－Determination of cationic-active matter content－Cationic-active matter of low molecular mass(between 200 and 500)
  • KS I ISO 13536:2008 Soil quality-Determination of the potential cation exchange capacity and exchangeable cations using barium chloride solution buffered at pH = 8.1
  • KS M ISO 2871-2:2007 Surface active agents－Detergents－Determination of cationic-active matter content－Cationic-active matter of low molecular mass(between 200 and 500)
  • KS M ISO 2871:2007 Surface active agents－Detergents－Determination of cationic-active matter content－High-molecular-mass cationic-active matter
  • KS D ISO 14237-2003(2018)
  • KS M ISO 2868-2007(2022) Surface active agents－Detergents－Anionic-active matter stable to acid hydrolysis－Determination of trace amounts
  • KS M ISO 6841-2007(2018) Surface active agents－Technical straight-chain sodium alkylbenzenesulfonates－Determination of mean relative molecular mass by gas-liquid chromatography
  • KS I ISO 10304-4-2008(2018) Water quality－Determination of dissolved anions by liquid chromatography of ions－Part 4：Determination of chlorate, chloride and chlorite in water with low contamination
  • KS D ISO 18118:2005 Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • KS I ISO 10304-3-2008(2018) Water quality－Determination of dissolved anions by liquid chromatography of ions－Part 3：Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate
  • KS D ISO 17560:2003 Surface chemical analysis－Secondary-on mass spectrometry－ Method for depth profiling of boron in silicon
  • KS I ISO 10304-1:2006 Water quality-Determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions, using liquid chromatography of ions-Part 1:Method for water with low contamination
  • KS I ISO 10304-1:2017 Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
  • KS M ISO 6845-2007(2018) Surface active agents－Technical alkane sulfonates－Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content
  • KS D ISO 18118-2005(2020) Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of h
  • KS M ISO 10304-2:2008 Water quality－Determination of dissolved anions by liquid chromatography of ions－Part 2：Determination of bromide, chloride, nitrate,nitrite, orthophosphate and sulfate in waste water
  • KS M ISO 10304-2:2003 Water quality－Determination of dissolved anions by liquid chromatography of ions－Part 2：Determination of bromide, chloride, nitrate,nitrite, orthophosphate and sulfate in waste water
  • KS D ISO 17925:2021 Zinc and/or aluminium based coatings on steel — Determination of coating mass per unit area and chemical composition — Gravimetry,inductively coupled plasma atomic emission spectrometry and flame atom
  • KS D ISO 17925-2006(2016) Zinc and/or aluminium based coatings on steel－Determination of coating mass per unit area and chemical composition－Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic
  • KS D ISO 17925:2006 Zinc and/or aluminium based coatings on steel－Determination of coating mass per unit area and chemical composition－Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
  • KS M ISO 6843:2008 Surface active agents-Sulfated ethoxylated alcohols and alkylphenols-Estimation of the mean relative molecular mass
  • KS M ISO 6843:2013 Surface active agents－Sulfated ethoxylated alcohols and alkylphenols－Estimation of the mean relative molecular mass
  • KS M ISO 6841:2007 Surface N agents-Technical straight-chain sodium alkylbenzenesulfonates-Determination of mean relative molecular mass by gas-liquid chromatography
  • KS I ISO 7875-1:2011 Water quality－Determination of surfactants－Part 1：Determination of anionic surfactants by measurement of the methylene blue index(MBAS)
  • KS M ISO 6845:2007 Surface N agents-Technical alkane sulfonates-Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The relative molecular mass of the ion

  • GB/T 25186-2010 Surface chemical analysis.Secondary-ion mass spectrometry.Determination of relative sensitivity factors from ion-implanted reference materials
  • GB/T 17282-1998 Method for estimation of molecular weight (relative molecular mass) of petroleum oils from viscosity measurements
  • GB/T 17282-2012 Test method for estimation of mean relative molecular mass of petroleum oils from viscosity measurements
  • GB/T 13530.3-1992 Sodium ethoxylated alkyl sulfate--Determination of the mean relative molecular mass
  • GB/T 5177.3-1985 Determination of mean relative molecular mass for industrial alkylbenzene--Gas-liquid chromatographic method
  • GB/T 11988-2008 Surface active agents-Technical alkane sulfonates-Determination of mean relative molecular mass and content of the alkane monosulfonate
  • GB/T 5178-2008 Surface active agentsm-Determination of mean relative molecular mass for technical straight-chain sodium alkylbenzenesulfonates-- Gas-liquid chromatographic method
  • GB/T 24794-2009 Photographic chemicals.Measurement methods of the trace elements in the organic compounds.Inductively coupled plasma atomic emission spectrometry(ICP-AES)
  • GB/T 27598-2011 Photographic chemicals.Measurement methods of the trace elements in the inorganic compounds.Inductively coupled plasma atomic emission spectrometry(ICP-AES)
  • GB/T 25934.3-2010(英文版) "Methods for chemical analysis of high purity gold—Part 3：Ethyl ether extraction separation inductively coupled plasma atomic emission spectrometry—Determination of impurity elements contents"
  • GB/T 42274-2022 Determination of the content and distribution of trace elements (magnesium, gallium) in aluminum nitride materials—Secondary ion mass spectrometry
  • GB/T 5178-1985 Determination of mean relative molecular mass for technical straight-chain sodium alkyl benzene sulphonates--Gas-liquid chromatographic method
  • GB/T 25934.1-2010(英文版) Methods for chemical analysis of high purity gold—Part 1: Ethyl acetate extraction separationinductively coupled plasmaatomic emission spectrometry—Determination of impurity elements contents
  • GB/T 14849.4-2014 Methods for chemical analysis of silicon metal.Part 4:Determination of impurity contents.Inductively coupled plasma atomic emission spectrometric method
  • GB/T 42732-2023 Size Distribution and Concentration Measurement of Inorganic Nanoparticles in Aqueous Phases in Nanotechnology by Single Particle Inductively Coupled Plasma Mass Spectrometry
  • GB/T 30702-2014 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • GB/T 11988-1989 Surface active agent--Technical alkane sulfonates--Determination of mean relative molecular mass and content of alkane monosulfonates
  • GB/T 12690.13-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides-Determination of molybdenum and tungsten content-Inductively coupled plasma atomic emission spectrographic method and inductively coupled plasma mass spectrum me
  • GB/T 13747.27-2020 Methods for chemical analysis of zirconium and zirconium alloys—Part 27：Determination of trace impurities content—Inductively coupled plasma mass spectrometry
  • GB/T 7717.16-2022 Acrylonitrile for industrial use—Part 16: Determination of iron and copper content—Graphite furnace atomic absorption spectrometry and inductively coupled plasma mass spectrometry
  • GB/T 20127.11-2006 Steel and alloy - Determination of trace element contents - Part 11: Determination of indium and thallium contents by inductively coupled plasma-mass spectrometric method
  • GB/T 14352.24-2022 Methods for chemical analysis of tungsten ores and molybdenum ores—Part 24: Determination of germanium conten—Inductively coupled plasma mass spectrometry
  • GB/T 26416.2-2010 Chemical analysis methods of dysprosium ferroalloy.Part 2: Determination of rare earth impurity contents.Inductively coupled plasma atomic emission spectrometry

ZA-SANS, The relative molecular mass of the ion

  • SANS 163-2:1995 Water quality - Determination of dissolved anions by liquid chromatography of ions Part 2: Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water
  • SANS 163-1:1992 Water quality - Determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions, using liquid chromatography of ions Part 1: Method for water with low contamination

British Standards Institution (BSI), The relative molecular mass of the ion

  • BS ISO 18114:2003 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials
  • 20/30409889 DC BS ISO 18114. Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative sensitivity factors from ion-implanted reference materials
  • BS ISO 18114:2021 Tracked Changes. Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative sensitivity factors from ion-implanted reference materials
  • BS ISO 23830:2008 Surface chemical analysis - Secondary-ion mass spectrometry - Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
  • BS ISO 18329:2004 Milk and milk products - Determination of furosine content - Ion-pair reverse-phase high-performance liquid chromatography method
  • BS ISO 13084:2011 Surface chemical analysis. Secondary-ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
  • BS EN 13273:2001 Surface active agents - Determination of the content of non-ionic substances in anionic surface active agents by high performance liquid chromatography (HPLC)
  • BS ISO 17862:2013 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • BS ISO 13084:2018 Tracked Changes. Surface chemical analysis. Secondary ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
  • BS ISO 17862:2022 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • BS EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - High-molecular-mass cationic-active matter
  • 20/30409963 DC BS ISO 17862. Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • BS 6829-3.1:1989 Analysis of surface active agents (raw materials). Sodium alkylbenzenesulphonates. Method for determination of mean relative molecular mass
  • BS EN ISO 10927:2011 Plastics. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • BS EN ISO 10927:2018 Plastics. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • BS ISO 17091:2013 Workplace air. Determination of lithium hydroxide, sodium hydroxide, potassium hydroxide and calcium dihydroxide. Method by measurement of corresponding cations by suppressed ion chromatography
  • 23/30461294 DC BS ISO 18118. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • BS 3762-3.7:1986 Analysis of formulated detergents - Quantitative test methods - Method for determination of total non-ionic matter content
  • BS ISO 18118:2015 Tracked Changes. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • BS 6829-5.2:1989 Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulphates. Method for estimation of mean relative molecular mass
  • BS ISO 23812:2009 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth calibration for silicon using multiple delta-layer reference materials
  • BS 3762-3.1:1990 Analysis of formulated detergents. Quantitative test methods. Method for determination of anionic-active matter content
  • 21/30424859 DC BS EN ISO 10304-4. Water quality. Determination of dissolved anions by liquid chromatography of ions. Part 4. Determination of chlorate, chloride and chlorite in water with low contamination
  • BS ISO 17560:2002 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth profiling of boron in silicon
  • BS ISO 17560:2014 Surface chemical analysis. Secondary-ion mass spectrometry. Method for depth profiling of boron in silicon
  • BS ISO 12010:2012 Water quality. Determination of short-chain polychlorinated alkanes (SCCPs) in water. Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)
  • BS 7755-3.3:1995 Soil quality. Chemical methods. Determination of effective cation exchange capacity and base saturation level using barium chloride solution
  • 19/30376495 DC BS EN 17374. Animal feeding stuffs: Methods of sampling and analysis. Determination of inorganic arsenic in animal feed by anion-exchange HPLC-ICPMS
  • BS ISO 16531:2020 Surface chemical analysis. Depth profiling. Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
  • BS EN ISO 6845:1989 Surface active agents - Technical alkane sulfonates - Determination of mean relative molecular mass and content of the alkane monosulphonates and the alkane monosulfonate content
  • BS EN ISO 6845:2003 Surface active agents. Technical alkane sulfonates. Determination of mean relative molecular mass and content of the alkane monosulphonates and the alkane monosulfonate content
  • BS EN 15111:2007 Foodstuffs - Determination of trace elements - Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry)
  • BS ISO 18118:2005 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • 19/30399949 DC BS ISO 16531. Surface chemical analysis. Depth profiling. Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
  • BS 3762 Sec.3.7:1986 Analysis of formulated detergents. Quantitative test methods. Method for determination of total non-ionic matter content
  • BS 3762 Sec.3.1:1990 Analysis of formulated detergents. Quantitative test methods. Method for determination of anionic-active matter content
  • BS EN ISO 10304-1:2009 Water quality. Determination of dissolved anions by liquid chromatography of ions. Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
  • BS ISO 16531:2013 Surface chemical analysis. Depth profiling. Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
  • 21/30434687 DC BS EN ISO 11268-2. Soil quality. Effects of pollutants on earthworms. Part 2. Determination of effects on reproduction of <i>Eisenia fetida/Eisenia andrei</i>
  • BS EN ISO 15192:2021 Soil and waste. Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection
  • BS ISO 22415:2019 Surface chemical analysis. Secondary ion mass spectrometry. Method for determining yield volume in argon cluster sputter depth profiling of organic materials

International Organization for Standardization (ISO), The relative molecular mass of the ion

  • ISO 18114:2003 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials
  • ISO 18114:2021 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials
  • ISO/TS 22933:2022 Surface chemical analysis — Secondary ion mass spectrometry — Method for the measurement of mass resolution in SIMS
  • ISO 18329:2004 Milk and milk products - Determination of furosine content - Ion-pair reverse-phase high-performance liquid chromatography method
  • ISO 18329:2004|IDF 193:2004 Determination of furosine content in milk and dairy products by ion-pair reversed-phase high-performance liquid chromatography
  • ISO 23830:2008 Surface chemical analysis - Secondary-ion mass spectrometry - Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
  • ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter
  • ISO 2871-1:1988 Surface active agents; detergents; determination of cationic-active matter content; part 1: high-molecular-mass cationic-active matter
  • ISO 18329:2004 | IDF 193:2004 Milk and milk products — Determination of furosine content — Ion-pair reverse-phase high-performance liquid chromatography method
  • ISO 13084:2011 Surface chemical analysis - Secondary-ion mass spectrometry - Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
  • ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500)
  • ISO 2871-2:1990 Surface active agents; detergents; determination of cationic-active matter content; part 2: cationic active matter of low molecular mass (between 200 and 500)
  • ISO 13536:1995 Soil quality - Determination of the potential cation exchange capacity and exchangeable cations using barium chloride solution buffered at pH = 8,1
  • ISO 178:1975 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 17862:2013 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 178:2019 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 17862:2022 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • ISO 6841:1983 Surface active agents — Technical straight-chain sodium alkylbenzenesulphonates — Determination of mean relative molecular mass — Gas-liquid chromatographic method
  • ISO 6843:1988 Surface active agents; sulfated ethoxylated alcohols and alkylphenols; estimation of the mean relative molecular mass
  • ISO 6845:1982 Surface active agents — Technical alkane sulphonates — Determination of mean relative molecular mass of alkane monosulphonates
  • ISO/DIS 18118:2023 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • ISO/FDIS 18118:2023 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • ISO 10304-4:2022 Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 4: Determination of chlorate, chloride and chlorite in water with low contamination
  • ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • ISO 18118:2015 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • ISO 16531:2020 Surface chemical analysis — Depth profiling — Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
  • ISO 6841:1988 Surface active agents; technical straight-chain sodium alkylbenzenesulfonates; determination of mean relative molecular mass by gas-liquid chromatography
  • ISO 17560:2002 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth profiling of boron in silicon
  • ISO 10304-2:1995 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 2: Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water
  • ISO 10304-1:1992 Water quality; determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions, using liquid chromatography of ions; part 1: method for water with low contamination
  • ISO 10304-1:2007 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
  • ISO 6845:1989 Surface active agents; technical alkane sulfonates; determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content
  • ISO 13876:2013 Soil quality.Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD)
  • ISO 29042-5:2010 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet
  • ISO 29042-6:2010 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet
  • ISO/FDIS 2613-2:2023 Analysis of natural gas — Silicon content of biomethane — Part 2: Determination of siloxane content by gas chromatography with ion mobility spectrometry
  • ISO 10304-1:2007/Cor 1:2010 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate; Technical Corrigendum 1
  • ISO 17925:2004 Zinc and/or aluminium based coatings on steel - Determination of coating mass per unit area and chemical composition - Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
  • ISO 16531:2013 Surface chemical analysis - Depth profiling - Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
  • ISO 22863-5:2021 Fireworks - Test methods for determination of specific chemical substances - Part 5: Analysis of lead and lead compounds by inductively coupled plasma spectrometry (ICP)
  • ISO 7875-1:1996 Water quality - Determination of surfactants - Part 1: Determination of anionic surfactants by measurement of the methylene blue index (MBAS)
  • ISO 15192:2010 Soil quality - Determination of chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection
  • ISO 15192:2021 Soil and waste - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection

Japanese Industrial Standards Committee (JISC), The relative molecular mass of the ion

  • JIS K 0163:2010 Surface chemical analysis -- Secondary-ion mass spectrometry -- Determination of relative sensitivity factors from ion-implanted reference materials
  • JIS K 0153:2015 Surface chemical analysis -- Secondary-ion mass spectrometry -- Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
  • JIS K 0157:2021 Surface chemical analysis -- Secondary ion mass spectrometry -- Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
  • JIS K 0155:2018 Surface chemical analysis -- Secondary ion mass spectrometry -- Linearity of intensity scale in single ion counting time-flight mass analysers
  • JIS K 0400-35-40:2000 Water quality -- Determination of dissolved anions by liquid chromatography of ions -- Part 2: Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water
  • JIS K 0400-52-30:2001 Water quality -- Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy
  • JIS K 0167:2011 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • JIS K 0400-35-30:1999 Water quality -- Determination of dissolved fluoride, chrolide, nitrite, orthophosphate, bromide, nitrate and sulfate ions, using liquid chromatography of ions Part 1: Method for water with low contamination
  • JIS K 0164:2010 Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth profiling of boron in silicon
  • JIS K 0169:2012 Surface chemical analysis -- Secondary-ion mass spectrometry (SIMS) -- Method for estimating depth resolution parameters with multiple delta-layer reference materials

Standard Association of Australia （SAA）, The relative molecular mass of the ion

  • AS ISO 18114:2006 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials
  • AS ISO 14237:2006 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
  • AS ISO 18118:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • AS ISO 17560:2006 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth profiling of boron in silicon

American Society for Testing and Materials (ASTM), The relative molecular mass of the ion

  • ASTM D2502-04(2009) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
  • ASTM D2502-92(1996) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
  • ASTM D2502-12 adjunct(2020) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
  • ASTM D2502-92(2002) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
  • ASTM D2503-92(2002)e1 Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D2503-92(2007) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D2503-92(2012) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D2503-92(1997) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D2503-92(2016) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D2503-82(1987)e1 Standard Test Method for Molecular Weight (Relative Molecular Mass) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D2502-04 Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
  • ASTM D2502-14(2019) Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
  • ASTM D2502-14(2019)e1 Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
  • ASTM D2502-14 Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
  • ASTM E1881-12 Standard Guide for Cell Culture Analysis with SIMS
  • ASTM UOP1031-19 Chromium (III) and Chromium (VI) Speciation in Water by IC-ICP-MS (Ion Chromatography- Inductively Coupled Plasma Mass Spectrometry)
  • ASTM D5739-00 Standard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry
  • ASTM D5739-06(2020) Standard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry
  • ASTM D5739-06 Standard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry
  • ASTM D5739-06(2013) Standard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry
  • ASTM UOP990-11 Organic Analysis of Distillate by Comprehensive Two-Dimensional Gas Chromatography with Flame Ionization Detection
  • ASTM C1816-15 Standard Practice for The Ion Exchange Separation of Small Volume Samples Containing Uranium, Americium, and Plutonium Prior to Isotopic Abundance and Content Analysis
  • ASTM C1816-16 Standard Practice for The Ion Exchange Separation of Small Volume Samples Containing Uranium, Americium, and Plutonium Prior to Isotopic Abundance and Content Analysis
  • ASTM D7134-05 Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
  • ASTM E1735-95(2000)e1 Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MV
  • ASTM E1735-19 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems from 4 to 25 MeV
  • ASTM C1379-10 Standard Test Method for Analysis of Urine for Uranium-235 and Uranium-238 Isotopes by Inductively Coupled Plasma-Mass Spectrometry
  • ASTM D7134-05(2012) Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
  • ASTM UOP1037-20 Trace Metals Analysis in Liquefied Petroleum Gases by Inductively Coupled Plasma-Mass Spectrometry
  • ASTM C1379-97 Standard Test Method for Analysis of Urine for Uranium-235 and Uranium-238 Isotopes by Inductively Coupled Plasma-Mass Spectrometry
  • ASTM D8110-17 Standard Test Method for Elemental Analysis of Distillate Products by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
  • ASTM E2426-10 Standard Practice for Pulse Counting System Dead Time Determination by Measuring Isotopic Ratios with SIMS
  • ASTM E2330-12 Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons

Association Francaise de Normalisation, The relative molecular mass of the ion

  • NF ISO 23830:2009 Analyse chimique des surfaces - Spectrométrie de masse des ions secondaires - Répétabilité et constance de l'échelle des intensités relatives en spectrométrie statique de masse des ions secondaires
  • NF T73-320-1*NF EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1 : high-molecular-mass cationic-active matter.
  • NF T73-320:1994 Surface active agents. Detergents. Determination of cationic-active matter content. Part 1 : high-molecular-mass cationic-active matter.
  • NF EN ISO 10304-4:2022 Qualité de l'eau - Dosage des anions dissous par chromatographie des ions en phase liquide - Partie 4 : dosage des ions chlorate, chlorure et chlorite dans des eaux faiblement contaminées
  • NF X21-064*NF ISO 23830:2009 Surface chemical analysis - Secondary-ion mass spectrometry - Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry.
  • NF T73-321:1994 Surface active agents. Detergents. Determination of cationic-active matter content. Part 2 : cationic-active matter of low molecular mass (between 200 and 500).
  • NF T73-320-2*NF EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2 : cationic-active matter of low molecular mass (between 200 and 500).
  • NF EN 13273:2001 Agents de surface - Détermination de la teneur en substances non-ioniques dans les agents de surface anioniques par chromatographie liquide à haute performance (CLHP)
  • NF T73-263*NF EN 13273:2001 Surface active agents - Determination of the contents of non-ionic susbstances in anionic surface active agents by high performance liquid chromatography (HPLC).
  • NF T73-259:1973 Surface active agents. Anionic active matter stable to acid hydrolysis. Determination of trace amounts.
  • NF EN 1784:2003 Produits alimentaires - Détection d'aliments ionisés contenant des lipides - Analyse par chromatographie en phase gazeuse des hydrocarbures
  • NF EN ISO 10304-3:1997 Qualité de l'eau - Dosage des anions dissous par chromatographie des ions en phase liquide - Partie 3 : dosage des ions chromate, iodure, sulfite, thiocyanate et thiosulfate
  • NF T30-711:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS).
  • NF T51-241:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • NF ISO 6843:1988 Agents de surface - Sulfates d'alcools et d'alkylphenols éthoxylés - Évaluation de la masse moléculaire relative moyenne.
  • NF X43-268*NF ISO 17091:2013 Workplace air - Determination of lithium hydroxide, sodium hydroxide, potassium hydroxide and calcium dihydroxide - Method by measurement of corresponding cations by suppressed ion chromatography
  • NF ISO 14237:2010 Analyse chimique des surfaces - Spectrométrie de masse des ions secondaires - Dosage des atomes de bore dans le silicium à l'aide de matériaux dopés uniformément
  • NF T90-049*NF EN ISO 10304-4:2022 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4 : determination of chlorate, chloride and chlorite in water with low contamination
  • NF EN ISO 10927:2018 Plastiques - Détermination de la masse moléculaire et de la distribution des masses moléculaires des polymères par spectrométrie de masse, à temps de vol, après désorption/ionisation laser assistée par matrice (SM-MALDI-TOF)
  • NF EN ISO 6845:2003 Agents de surface - Alcanesulfonates techniques - Détermination de la masse moléculaire relative moyenne des alcanemonosulfonates et de leur teneur
  • NF EN 1785:2003 Produits alimentaires - Détection d'aliments ionisés contenant des lipides - Analyse par chromatographie en phase gazeuse/Spectrométrie de masse des 2-alkylcytobutanones
  • NF T51-241:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS).
  • NF ISO 6841:1988 Agents de surface - Alkylbenzène sulfonates de sodium linéaires techniques - Détermination de la masse moléculaire relative moyenne par chromatographie gaz-liquide.
  • NF M60-804-2:2004 Nuclear energy - Activity measurement of transuranium elements (Pu, Am, Cm) in water with alpha spectrometry - Part 2 : radionuclides separation with anionic and cationic resines and chromatographic extraction.
  • NF T90-046:2014 Water quality - Determination of short-chain polychlorinated alkanes (SCCPs) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)
  • NF X21-066*NF ISO 23812:2009 Surface chemical analysis - Secondary ion mass spectrometry - Method for depth calibration for silicon using multiple delta-layer reference materials
  • NF EN 17374:2020 Aliments des animaux - Méthodes d'échantillonnage et d'analyse - Détermination de la teneur en arsenic inorganique dans les aliments pour animaux, par CLHP avec échange d'anions et spectrométrie de masse à plasma induit par haute fréquence (I...
  • NF X21-051*NF ISO 17560:2006 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth profiling of boron in silicon
  • NF ISO 17560:2006 Analyse chimique des surfaces - Spectrométrie de masse des ions secondaires - Dosage du bore dans le silicium par profilage d'épaisseur
  • NF T73-238*NF EN ISO 6845:2003 Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content
  • NF T73-241*NF ISO 6843:1988 Surface active agents. Sulfated ethoxylated alcohols and alkylphenols. Estimation of the mean relative molecular mass.
  • NF X43-265-1:2012 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1 : sampling.
  • XP X31-430-2-2016 Soil quality - Risk-based petroleum hydrocarbons - Part 2 : determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionization detection (GC/FID)
  • NF EN ISO 13304-2:2022 Radioprotection - Critères minimaux pour la spectroscopie par résonance paramagnétique électronique (RPE) pour la dosimétrie rétrospective des rayonnements ionisants - Partie 2 : dosimétrie ex vivo à partir de l'émail dentaire humain
  • NF C05-100-3-2*NF EN 62321-3-2:2014 Determination of certain substances in electrotechnical products - Part 3-2 : screening - Total bromine in polymers and electronics by Combustion - Ion Chromatography
  • NF T73-238:1989 Surface active agents. Technical alkane sulfonates. Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content.
  • NF X31-171:2011 Soil quality - Determination of chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection.
  • NF ISO 11916-2:2013 Qualité du sol - Dosage d'une sélection d'explosifs de composés apparentés - Partie 2 : méthode utilisant la chromatographie en phase gazeuse (CG) avec détection à capture d'électrons (DCE) ou détection par spectrométrie de masse (SM)
  • NF U42-421*NF EN 16318+A1:2016 Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
  • NF U42-421:2014 Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
  • NF EN ISO 11268-1:2015 Qualité du sol - Effets des polluants vis-à-vis des vers de terre - Partie 1 : détermination de la toxicité aiguë vis à vis de Eisenia fetida/Eisenia andrei

RU-GOST R, The relative molecular mass of the ion

  • GOST R 54352-2011 Food common salt. Determination of a mass fraction of magnesium-ion and calcium-ion by complexonometric method
  • GOST R 57060-2016 Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma atomic emission spectrometry method
  • GOST R 54353-2011 Food common salt. Determination of sulphate-ion mass fraction by gravimetric method
  • GOST R 57061-2016 Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma mass spectrometry method
  • GOST R 55761-2013 Batches, sugar mash, brew from food raw material. Determination mass concentration of cations, anions of non-organic and organic acids content by capillary electrophoresis method
  • GOST 33769-2016 Food common salt. Mercurymetric method of chlor-ion mass fraction determination
  • GOST R 50061-1992 Surface active agents. Sulfated ethoxylated alcohols and alkylphenols. Estimation of the mean relative molecular mass
  • GOST R 54730-2011 Food common salt. Measurement (determination) of potassium-ion mass fraction by flame-photometric method
  • GOST 34247-2017 Copper concentrate. Measurement of copper and impurities weight fraction by an inductively coupled plasma atomic emission spectrometry method
  • GOST 33616-2015 Food products, food raw materials. Method for determination of residues of arsenic containing growth stimulators using high performance liquid chromatography-mass spectrometry with inductively coupled plasma
  • GOST R ISO 13899-2-2009 Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method. Part 2. Determination of Nb content
  • GOST 34248-2017 Copper and polymetallic ores. Measurement of copper and impurities weight fraction by an inductively coupled plasma atomic emission spectrometry method
  • GOST R ISO 15202-3-2008 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 3. Analysis
  • GOST 28954-1991 Surface active agents and detergents. Determination of anionic-active matter by manual or mechanical direct two-phase titration procedure
  • GOST R ISO 15202-1-2007 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 1. Sampling
  • GOST R ISO 15202-2-2008 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 2. Sample preparation
  • GOST R ISO 16918-1-2013 Steel and iron. Inductively coupled plasma mass spectrometric method. Part 1. Determination of tin, antimony, cerium, lead and bismuth content
  • GOST R ISO 17925-2012 Zinc and/or aluminium based coatings on steel. Determination of chemical composition and coating mass per unit area. Gravimetry, atomic emission spectrometry with inductively coupled plasma and flame atomic absorption spectrometry methods
  • GOST ISO 1940-2-1999 Mechanical vibration. Balance quality requirements of rigid rotors. Part 2. Balance errors
  • GOST R 56374-2015 Feedstuffs, compound feeds, feed raw materials. Determination of mass fraction of ammonium, potassium, sodium, magnesium and calcium cations using capillary electrophoresis

Professional Standard - Rare Earth, The relative molecular mass of the ion

  • XB/T 619-2015 Chemical analysis methods of ion type rare earth ore.Determination of total rare earth ion phase
  • XB/T 616.2-2012 Chemical analysis methods of gadolinium ferroalloy.Part 2:Determination of rare earth impurity contents.Inductively coupled plasma atomic emission spectrometry

Danish Standards Foundation, The relative molecular mass of the ion

  • DS/EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter
  • DS/ISO 18329:2004 Milk and milk products - Determination of furosine content - Ion-pair reverse-phase high-performance liquid chromatography method
  • DS/EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500)
  • DS/EN 13273:2001 Surface active agents - Determination of the content of non-ionic substances in anionic surface active agents by high performance liquid chromatograph (HPLC)
  • DS/EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • DS/EN ISO 10304-4:2000 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination
  • DS/EN ISO 10304-3:1998 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate
  • DS/EN ISO 10304-1:2009 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
  • DS/EN ISO 6845:2003 Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content
  • DS/ISO 11916-2:2013 Soil quality - Determination of selected explosives and related compounds - Part 2: Method using gas chromatography (GC) with electron capture detection (ECD) or mass spectrometric detection (MS)

German Institute for Standardization, The relative molecular mass of the ion

  • DIN EN ISO 2871-1:2010-06 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010); German version EN ISO 2871-1:2010
  • DIN EN ISO 2871-2:2010-06 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010); German version EN ISO 2871-2:2010
  • DIN EN 13273:2001-06 Surface active agents - Determination of the contents of non-ionic substances in anionic surface active agents by high performance liquid chromatograph (HPLC); German version EN 13273:2001
  • DIN EN ISO 10927:2018-10 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018); German version EN ISO 10927:2018
  • DIN 6802-6:2013 Neutron dosimetry.Part 6: Methods for determination of absorbed dose using ionisation chambers
  • DIN EN ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018)
  • DIN EN ISO 10304-4:1999-07 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO 10304-4:1997); German version EN ISO 10304-4:1999 / Note: To be replaced ...
  • DIN EN ISO 10304-4:2021-08 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO/DIS 10304-4:2020); German and English version prEN ISO 10304-4:2020 / Not...
  • DIN EN ISO 10304-4:1999 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO 10304-4:1997); German version EN ISO 10304-4:1999
  • DIN EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010); German version EN ISO 2871-2:2010
  • DIN EN ISO 10304-3:1997-11 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate (ISO 10304-3:1997); German version EN ISO 10304-3:1997
  • DIN EN ISO 10304-1:2009-07 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007); German version EN ISO 10304-1:2009
  • DIN EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011); German version EN ISO 10927:2011
  • DIN EN ISO 6845:2003 Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content (ISO 6845:1989); German version EN ISO 6845:2003
  • DIN 38406-33:2000 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 33: Determination of manganese by atomic absorption spectrometry (E 33)
  • DIN EN ISO 6845:2003-06 Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content (ISO 6845:1989); German version EN ISO 6845:2003
  • DIN 38406-6:1998 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 6: Determination of lead by atomic absorption spectrometry (AAS) (E 6)
  • DIN 19682-13:2009-01 Soil quality - Field tests - Part 13: Determination of carbonate, sulfide, pH-value and iron(II)-ions
  • DIN EN ISO 2871-2:1994 Surface active agents - Detergents - Determination of cationic-active matter content; Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:1990); German version EN ISO 2871-1:1994
  • DIN 19682-13:2009 Soil quality - Field tests - Part 13: Determination of carbonate, sulfide, pH-value and iron(II)-ions
  • DIN EN ISO 11268-2:2021-12 Soil quality - Effects of pollutants on earthworms - Part 2: Determination of effects on reproduction of Eisenia fetida/Eisenia andrei (ISO/DIS 11268-2:2021); German and English version prEN ISO 11268-2:2021 / Note: Date of issue 2021-11-12*Intended as...
  • DIN EN ISO 11268-1:2015-11 Soil quality - Effects of pollutants on earthworms - Part 1: Determination of acute toxicity to Eisenia fetida/Eisenia andrei (ISO 11268-1:2012); German version EN ISO 11268-1:2015
  • DIN 38405-35:2004 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 35: Determination of arsenic - Method by graphite furnace atomic absorption spectrometry (GF-AAS) (D 35)
  • DIN EN ISO 12010:2014 Water quality - Determination of short-chain polychlorinated alkanes (SCCPs) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI) (ISO 12010:2012); German version EN ISO 12010:2014
  • DIN EN ISO 10304-1:2009 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007); English version of DIN EN ISO 10304-1:2009-07
  • DIN CEN ISO/TS 16558-2:2015-12*DIN SPEC 8109:2015-12 Soil quality - Risk-based petroleum hydrocarbons - Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionization detection (GC/FID) (ISO/TS 16558-2:2015); German version...
  • DIN EN ISO 13304-2:2023-04 Radiological protection - Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation - Part 2: Ex vivo human tooth enamel dosimetry (ISO 13304-2:2020); German version EN ISO 13304-2:2022
  • DIN ISO 11916-2:2014-11 Soil quality - Determination of selected explosives and related compounds - Part 2: Method using gas chromatography (GC) with electron capture detection (ECD) or mass spectrometric detection (MS) (ISO 11916-2:2013)

Professional Standard - Commodity Inspection, The relative molecular mass of the ion

  • SN/T 3002-2011 Determication of relative molecular weight and molecular weight distribution of polyethylene.Gel permeation chromatography method
  • SN/T 4183-2015 Determination of relative molecular weight and molecular weight distribution of polyolefins.High temperature gel permeation chromatography method

ES-AENOR, The relative molecular mass of the ion

TH-TISI, The relative molecular mass of the ion

  • TIS 1762.1-1999 Surface active agents.detergents.determination of cationic-active matter content.part 1: high-molecular-mass cationic-active matter
  • TIS 1762.2-1999 Surface active agents.detergents.determination of cationic-active matter content.part 2 : cationic-active matter of low molecular mass (between 200 and 500)

European Committee for Standardization (CEN), The relative molecular mass of the ion

  • EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter
  • EN ISO 2871-2:1994 Surface Active Agents - Detergents - Determination of Cationic-Active Matter Content - Part 2: Cationic-Active Matter of Low Molecular Mass (Between 200 and 500) (ISO 2871-2:1990)
  • EN ISO 15061:2001 Water Quality - Determination of Dissolved Bromate - Method by Liquid Chromatography of Ions ISO 15061:2001
  • EN ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)
  • EN ISO 2871-1:1994 Surface Active Agents - Detergents - Determination of Cationic-Active Matter Content - Part 1: High - Molecular-Mass Cationic-Active Matter (ISO 2871-1:1988)
  • EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010)
  • EN ISO 11268-2:2023 Soil quality - Effects of pollutants on earthworms - Part 2: Determination of effects on reproduction of Eisenia fetida/Eisenia andrei and other earthworm species (ISO 11268-2:2023)
  • FprEN ISO 10304-4:2021 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO/FDIS 10304-4:2021)
  • EN ISO 11268-2:2015 Soil quality - Effects of pollutants on earthworms - Part 2: Determination of effects on reproduction of Eisenia fetida/Eisenia andrei
  • EN ISO 6845:2003 Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content
  • EN 15111:2007 Foodstuffs - Determination of trace elements - Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry)
  • EN ISO 10304-1:2009/AC:2012 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate - Technical Corrigendum 1 (ISO 10304-1:2007/Cor 1:2010)
  • EN ISO 10304-1:2009 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007)
  • EN ISO 10304-1:1995 Water Quality - Determination of Dissolved Fluoride, Chloride, Nitrite, Orthophosphate, Bromide, Nitrate and Sulfate Ions, Using Liquid Chromatography of Ions - Part 1: Method for Water with Low Contamination (ISO 10304-1 : 1992)
  • EN ISO/TS 16558-2:2015 Soil quality - Risk-based petroleum hydrocarbons - Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionization detection (GC/FID)
  • EN ISO 11268-1:2015 Soil quality - Effects of pollutants on earthworms - Part 1: Determination of acute toxicity to Eisenia fetida/Eisenia andrei (ISO 11268-1:2012)
  • EN 12582:1999 Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD
  • EN ISO 15192:2021 Soil and waste - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection (ISO 15192:2021)

Lithuanian Standards Office , The relative molecular mass of the ion

  • LST EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010)
  • LST EN 13273-2002 Surface active agents - Determination of the content of non-ionic substances in anionic surface active agents by high performance liquid chromatography (HPLC)
  • LST EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010)
  • LST EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)
  • LST EN ISO 10304-4:2000 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO 10304-4:1997)
  • LST EN ISO 10304-3:2000 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate (ISO 10304-3:1997)
  • LST EN ISO 6845:2003 Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content (ISO 6845:1989)
  • LST EN ISO 10304-1:2009 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007)

AENOR, The relative molecular mass of the ion

  • UNE-EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010)
  • UNE-EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010)
  • UNE 55533:1976 SURFACE ACTIVE AGENTS. DETERGENTS. ANIONIC-ACTIVE MATTER STABLE TO ACID HYDROLYSIS. DETERMINATION OF TRACE AMOUNTS
  • UNE 55842:1990 SURFACE ACTIVE AGENTS. SULFATED ETHOXYLATED ALCOHOLS AND ALKYLPHENOLS. ESTIMATION OF THE MEAN RELATIVE MOLECULAR MASS
  • UNE-EN ISO 10927:2012 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)
  • UNE 55806:1990 SURFACE ACTIVE AGENTS. TECHNICAL STRAIGHT-CHAIN SODIUM ALKYLBENZENESULFONATES. DETERMINATION OF MEAN RELATIVE MOLECULAR MASS BY GAS-LIQUID CHROMATOGRAPHY
  • UNE-EN ISO 10304-4:1999 WATER QUALITY. DETERMINATION OF DISSOLVED ANIONS BY LIQUID CHROMATOGRAPHY OF IONS. PART 4: DETERMINATION OF CHLORATE, CHLORIDE AND CHLORITE IN WATER WITH LOW CONTAMINATION (ISO 10304-4:1997)
  • UNE-EN ISO 10304-3:1997 WATER QUALITY. DETERMINATION OF DISSOLVED ANIONS BY LIQUID CHROMATOGRAPHY OF IONS. PART 3: DETERMINATION OF CHROMATE, IODIDE, SULFITE ,THIOCYANATE AND THIOSULFATE. (ISO 10304-3:1997).
  • UNE-EN ISO 6845:2003 Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content (ISO 6845:1989)
  • UNE-EN ISO 10304-1:2009 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007)

Jiangxi Provincial Standard of the People's Republic of China, The relative molecular mass of the ion

  • DB36/T 689-2012 Chemical analysis method of ionic rare earth raw ore Determination of total amount of rare earth in ionic phase EDTA titration method
  • DB36/T 814.2-2014 Methods for chemical analysis of holmium-iron alloys part 2: Determination of rare earth impurity content by inductively coupled plasma emission spectrometry

ES-UNE, The relative molecular mass of the ion

  • UNE-EN 13273:2002 Surface active agents - Determination of the content of non-ionic substances in anionic surface active agents by high performance liquid chromatography (HPLC).
  • UNE-EN ISO 10927:2019 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018)
  • UNE 55533:1990 ERRATUM SURFACE ACTIVE AGENTS. DETERGENTS. ANIONIC-ACTIVE MATTER STABLE TO ACID HYDROLYSIS. DETERMINATION OF TRACE AMOUNTS
  • UNE-EN ISO 10304-4:2022 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO 10304-4:2022)
  • UNE-EN ISO 11268-1:2015 Soil quality - Effects of pollutants on earthworms - Part 1: Determination of acute toxicity to Eisenia fetida/Eisenia andrei (ISO 11268-1:2012) (Endorsed by AENOR in September of 2015.)
  • UNE-CEN ISO/TS 16558-2:2015 Soil quality - Risk-based petroleum hydrocarbons - Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionization detection (GC/FID) (ISO/TS 16558-2:2015) (Endorsed by AE...

Professional Standard - Light Industry, The relative molecular mass of the ion

  • QB/T 2345-2013 Determination of mean relative molecular weight of alkyldimethylbetain by GC
  • QB/T 2345-1997 Determination of the Average Relative Molecular Mass of Fatty Alkyl Dimethyl Betaines by Gas-Liquid Chromatography
  • QB/T 1914-2013 Determination of mean relative molecular weight of alkyltrimethylammonium halide and alkyldimethylbenzylammonium halide by GC

Professional Standard - Military and Civilian Products, The relative molecular mass of the ion

  • WJ 2122-1993 Determination of water quality 2,4-dihydroxy-1,3,5-trinitrobenzene (stephanic acid) by reversed-phase ion-pair liquid chromatography

Group Standards of the People's Republic of China, The relative molecular mass of the ion

  • T/ZJBX 10-2021 Determination of the proportion of protein hydrolysates with relative molecular weight less than 1000u in protein feed
  • T/SATA 041-2023 Determination of organic selenium content by liquid chromatography-inductively coupled plasma mass spectrometry in foods
  • T/CASAS 010-2019 Determination of Trace Impurities Concentration and Distribution in GaN Materials by Secondary Ion Mass Spectrometry
  • T/CASAS 009-2019 Determination of Trace Impurities Concentration and Distribution in Semi-insulating SiC Materials by Secondary Ion Mass Spectrometry
  • T/CGA 031-2022 Method for chenical analysis of water in gold industry—Determination of silver, arsenic, barium, cadmium, chromium, copper, iron, manganese, nickel, lead and zinc content—Inductively coupled plasma optical emission spectrometry
  • T/CSTM 00780.3-2023 Methods for chemical analysis of sodium vanadate—Part 3: Determination of silicon，aluminum，etc. 12 impurity elements content —Inductively coupled plasma

工业和信息化部, The relative molecular mass of the ion

  • YB/T 4799-2018 Determination of the precipitated phase amount of aluminum nitride in steel by electrolytic separation-inductively coupled plasma atomic emission spectrometry
  • YS/T 1050.10-2016 Methods for chemical analysis of lead and antimony concentrates Part 10 Determination of thallium content Inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry
  • YS/T 445.14-2019 Methods for chemical analysis of silver concentrates Part 14: Determination of thallium content by inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry
  • YS/T 1261-2018 Hafnium Chemical Analysis Method Determination of Impurity Element Content Inductively Coupled Plasma Atomic Emission Spectrometry
  • YS/T 1171.13-2021 Methods for chemical analysis of recycled zinc raw materials Part 13: Determination of thallium content by inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry
  • YS/T 461.12-2016 Methods for chemical analysis of mixed lead-zinc concentrates Part 12: Determination of thallium content by inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry
  • YS/T 870-2020 Chemical Analysis Methods for Pure Aluminum Determination of Trace Impurity Element Contents Inductively Coupled Plasma Mass Spectrometry
  • YB/T 4700-2018 Determination of the amount of precipitated phase of manganese sulfide in iron and steel by electrolytic separation-flame atomic absorption spectrometry
  • YS/T 630-2016 Chemical analysis method of alumina Determination of impurity element content Inductively coupled plasma atomic emission spectrometry
  • XB/T 623.2-2018 Methods for chemical analysis of ferrocerium alloys Part 1: Determination of rare earth impurity content by inductively coupled plasma atomic emission spectrometry
  • XB/T 624.1-2018 Methods for chemical analysis of yttrium-iron alloys Part 1: Determination of rare earth impurity content by inductively coupled plasma atomic emission spectrometry
  • XB/T 623.1-2018 Methods for chemical analysis of ferrocerium alloys Part 1: Determination of rare earth impurity content by inductively coupled plasma atomic emission spectrometry
  • YS/T 474-2021 Chemical Analysis Methods for High Purity Gallium Determination of Trace Elements Inductively Coupled Plasma Mass Spectrometry
  • YS/T 739.3-2020 Methods for chemical analysis of aluminum electrolytes Part 3: Determination of elemental contents of sodium, calcium, magnesium, potassium and lithium by inductively coupled plasma atomic emission spectrometry

国家市场监督管理总局、中国国家标准化管理委员会, The relative molecular mass of the ion

  • GB/T 40798-2021 Chemical analysis method of ion-adsorption rare earth ore—Determination of total rare earth contents—Inductively coupled plasma mass spectrometry
  • GB/T 7739.14-2019 Methods for chemical analysis of gold concentrates—Part 14: Determination of thallium content—Inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry
  • GB/T 40374-2021 Hardmetals—Determination of lead and cadmium content—Flame atomic absorption spectrometric method and inductively coupled plasma atomic emission spectrometry
  • GB/T 37160-2019 Standard test method for determination of trace metals in heavy distillate,residual oil and crude oil—Inductively coupled plasma optical emission spectrometry（ICP-OES）
  • GB/T 41330-2022 Analysis of water used in boiler and cooling system—Determination of trace copper, iron, sodium, calcium and magnesium—Inductively coupled plasma mass spectrometry (ICP-MS)

BE-NBN, The relative molecular mass of the ion

  • NBN EN ISO 2871-2:1995 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2 : Cationic- active matter of low molecular mass (between 200 and 500) (ISO 2871-2:1990)
  • NBN T 63-124-1980 Surface active agents - Deergents - Anionic-active matter stable to acid hydrolysis - Deermination of trace amounts
  • NBN T 63-162-1988 Surface active agents - Sulfated ethoxylated alcohols and alkylphenols - Estimation of the mean relative molecular mass
  • NBN T 63-161-1988 Surface active agents - Technical straight-chain sodium alkylbenzene sulfonates - Determination of mean relative molecular mass by gas-liquid chromatography
  • NBN-ISO 6845:1990 Oppervlakactieve stoffen - Technische alkaansulfonaten - Bepaling van de gemiddelde relatieve moléculaire massa van de alkaanmonosulfonaten en van hun gehalte
  • NBN T 63-154-1983 Surface active agents - Technical alkane sulphonates - Determination of mean relative molecular mass of alkane monosulphonates

KR-KS, The relative molecular mass of the ion

  • KS M ISO 6843-2008 Surface active agents－Sulfated ethoxylated alcohols and alkylphenols－Estimation of the mean relative molecular mass
  • KS I ISO 14154-2016 Soil quality－Determination of some selected chlorophenols－ Gas-chromatographic method with electron-capture detection
  • KS M ISO 6841-2007(2023) Surface active agents－Technical straight-chain sodium alkylbenzenesulfonates－Determination of mean relative molecular mass by gas-liquid chromatography
  • KS I ISO 10304-1-2023 Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
  • KS I ISO 10304-1-2017 Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
  • KS M ISO 6845-2007(2023) Surface active agents－Technical alkane sulfonates－Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content
  • KS M ISO 10304-2-2003 Water quality－Determination of dissolved anions by liquid chromatography of ions－Part 2：Determination of bromide, chloride, nitrate,nitrite, orthophosphate and sulfate in waste water
  • KS D ISO 17925-2021 Zinc and/or aluminium based coatings on steel — Determination of coating mass per unit area and chemical composition — Gravimetry,inductively coupled plasma atomic emission spectrometry and flame atom

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, The relative molecular mass of the ion

  • GB/T 20899.14-2017 Methods for chemical analysis of gold ores-Part 14: Determination of thallium content - Inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry
  • GB/T 8152.13-2017 Methods for chemical analysis of lead concentrates—Part 13：Determination of thallium content—Inductively coupled plasma mass spectrometry and inductively coupled plasma-atomic emission spectrometry
  • GB/T 8151.21-2017 Methods for chemical analysis of zinc concentrates—Part 21：Determination of thallium content—Inductively coupled plasma mass spectrometry and inductively coupled plasma-atomic emission spectrometry
  • GB/T 3884.19-2017 Methods for chemical analysis of copper concentrates—Part 19: Determination of thallium content—Inductively coupled plasma mass spectrometry
  • GB/T 34174-2017 Surface chemical analysis—Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation

CZ-CSN, The relative molecular mass of the ion

  • CSN 40 4012-1971 Measurement of ionizing radiation and particle emission of radionuclides. Relative activity measurement with internal proporlional counters.

VN-TCVN, The relative molecular mass of the ion

  • TCVN 6494-4-2000 Water quality.Determination of dissolved anion by liquid chromatography of ions.Part 4: Determination of chlorrate, chlorride and chlorite in water with low contaminationa
  • TCVN 6494-1-2011 Water quality.Determination of dissolved anions by liquid chromatography of ions.Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
  • TCVN 6494-3-2000 Water quality.Determination of dissolved anion by liquid chromatography of ions.Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulffate
  • TCVN 6622-1-2009 Water quality.Determination of surfactants.Part 1: Determination of anionic surfactants by measurement of the methylene blue index (MBAS)

GOSTR, The relative molecular mass of the ion

  • GOST R IEC 61190-1-1-2020 Materials for electronic modules. Part 1-1. Requirements for soldering fluxes for high-quality interconnections in electronics assembly
  • GOST 34596-2019 Food products, feed, food raw materials. Determination of the mass fraction of methylmercury compounds and inorganic mercury compounds by high performance liquid chromatography-mass spectrometry with inductively coupled plasma

Universal Oil Products Company (UOP), The relative molecular mass of the ion

  • UOP 990-2011 Organic Analysis of Distillate by Comprehensive Two-Dimensional Gas Chromatography with Flame Ionization Detection

Jilin Provincial Standard of the People's Republic of China, The relative molecular mass of the ion

  • DB22/T 2465-2016 Determination of triazotin and fenbutyltin residues in water by liquid chromatography-inductively coupled plasma mass spectrometry

农业农村部, The relative molecular mass of the ion

  • NY/T 1860.38-2016 Test Guidelines for Determination of Physicochemical Properties of Pesticides Part 38: Stability to metals and metal ions

Professional Standard - Geology, The relative molecular mass of the ion

  • DZ/T 0064.28-2021 Methods of analysis of groundwater quality - Part 28: Determination of potassium, sodium, lithium and ammonium by ion chromatography
  • DZ/T 0064.80-2021 Groundwater Quality Analysis Methods Part 80: Determination of Lithium, Rubidium, Cesium and Other 40 Elements by Inductively Coupled Plasma Mass Spectrometry

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., The relative molecular mass of the ion

  • ASHRAE 3909-1995 Inorganic Fluoride Uptake as a Measure of Relative Compatibility of Molecular Sieve Desiccants with Fluorocarbon Refrigerants

Professional Standard - Non-ferrous Metal, The relative molecular mass of the ion

  • YS/T 870-2013 Chemical analysis of high purity aluminium.Determination of trace impurities.Inductively coupled plasma mass spectrometry
  • YS/T 896-2013 Methods for chemical analysis of high purity niobium.Determination of trace impurity element content.Inductively coupled plasma mass spectrometry
  • YS/T 892-2013 Methods for chemical analysis of high purity titanium.Determination of trace impurity element content.Inductively coupled plasma mass spectrometry
  • YS/T 898-2013 Methods for chemical analysis of the high purity tantalum.Determination of trace impurity element content.Inductively coupled plasma mass spectrometry
  • YS/T 900-2013 Methods for chemical analysis of the high purity tungsten.Determination of trace impurity element content.Inductively coupled plasma mass spectrometry
  • YS/T 630-2007 Chemical analysis methods of alumina.Determination of impurities in alumina.Inductively coupled plasma atomic emission spectrometric method
  • YS/T 474-2005 Determination of trace elements in high-purity gallium -ICP-MS analytical method
  • YS/T 928.5-2013 Methods for chemical analysis of nickel cobalt manganese composite hydroxide.Part 5:Determination of lead contents.Inductively coupled plasma mass spectrometry
  • YS/T 276.11-2011 Methods for chemical analysis of indium.Part 11:Determination of arsenic,aluminium,lead,iron,copper,cadmium,tin,thallium,zinc and bismuth content.Inductively coupled plasma mass spectrometry
  • YS/T 281.17-2011 Methods for chemical analysis of cobalt.Part 17：Determination of aluminum,manganese,nickel,copper,zinc,cadmium,tin,antimony,lead and bismuth content.Inductively coupled plasma mass spectrometry
  • YS/T 1603.3-2023 Methods for chemical analysis of tungsten-based high specific gravity alloys Part 3: Determination of aluminum, magnesium and calcium contents by inductively coupled plasma mass spectrometry

国家食品药品监督管理局, The relative molecular mass of the ion

  • YY/T 1507.2-2016 Determination of impurity elements in ultra-high molecular weight polyethylene powder for surgical implants Part 2: Determination of chlorine (Cl) element content by ion chromatography

未注明发布机构, The relative molecular mass of the ion

  • BS EN ISO 10304-2:1997(1998)*BS 6068-2.53:1997 Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 2 : Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water
  • BS 3762-3.7:1986(2008) Analysis of formulated detergents — Part 3 : Quantitative test methods — Section 3.7 Method for determination of total non - ionic matter content

International Electrotechnical Commission (IEC), The relative molecular mass of the ion

  • IEC 61988-2-6:2015 Plasma display panels - Part 2-6: Measuring methods - APL dependent gamma and colour characteristics
  • IEC 62321-3-2:2013 Determination of certain substances in electrotechnical products - Part 3-2: Screening test methods - Screening of total bromine in polymers and electronics by combustion - Ion chromatography (C-IC)

海关总署, The relative molecular mass of the ion

  • SN/T 5323-2021 Determination of the migration amount of parabens in food contact materials, polymer materials, plastics, liquid chromatography-tandem mass spectrometry

SE-SIS, The relative molecular mass of the ion

  • SIS SEN 01 02 66-1968 Electrotechnical vocabulary Detection and measurement of ionizing radiation by electric means

European Committee for Electrotechnical Standardization（CENELEC）, The relative molecular mass of the ion

  • EN 61010-2-061:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
  • EN 61010-2-061:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization (Remains Current)

CENELEC - European Committee for Electrotechnical Standardization, The relative molecular mass of the ion

  • EN 61010-2-061:1996 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use Part 2-061: Particular Requirements for Laboratory Atomic Spectrometers with Thermal Atomization and Ionization

国家质量监督检验检疫总局, The relative molecular mass of the ion

  • SN/T 4585-2016 Determination of methylarsonic acid and dimethylarsinic acid residues in exported foods by liquid chromatography-inductively coupled plasma mass spectrometry
  • SN/T 4501.3-2017 Methods for chemical analysis of nickel concentrates Part 3: Determination of gold, platinum and palladium content by inductively coupled plasma mass spectrometry
  • SN/T 3850.1-2014 Determination of various sugar alcohol sweeteners in exported foods Part 1: Liquid chromatography-tandem mass spectrometry and ion chromatography

Anhui Provincial Standard of the People's Republic of China, The relative molecular mass of the ion

  • DB34/T 2432-2015 Determination of Photoinitiator Migration in Polymer Base Films, Bags by Liquid Chromatography-Tandem Mass Spectrometry
  • DB34/T 2127.4-2014 Methods of Analytical Samples for Regional Geochemical Surveys Part 4: Determination of Multielement Content by Plasma Mass Spectrometry
  • DB34/T 3368.5-2019 Methods of analysis of hazardous substances in printed circuit boards - Part 5: Determination of mercury content by inductively coupled plasma spectrometry
  • DB34/T 2127.5-2014 Methods of Analytical Samples for Regional Geochemical Surveys Part 5: Determination of Gold Content by Foam Adsorption-Plasma Mass Spectrometry

Hebei Provincial Standard of the People's Republic of China, The relative molecular mass of the ion

  • DB13/T 5127.8-2019 Determination of Toxic and Hazardous Substances in Extracts of Implantable Medical Device Polymer Materials by High Performance Liquid Chromatography for Migration of Terephthalic Acid
  • DB13/T 5127.15-2019 Determination of Toxic and Hazardous Substances in Extracts of Implantable Medical Devices’ Polymer Materials Lead, Arsenic, Cadmium, Chromium, Copper, Antimony, Barium, Aluminum, Zinc, Tin Migration Inductively Coupled Plasma Mass Spectrometry

IN-BIS, The relative molecular mass of the ion

  The relative molecular mass of the ion.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved