ZH
RU
ES

Acrylic Resin Acrylic Content

Acrylic Resin Acrylic Content, Total:248 items.

In the international standard classification, Acrylic Resin Acrylic Content involves: Dentistry, Paints and varnishes, Rubber and plastics products, Interior finishing, Paint ingredients, Plastics, Inks. Printing inks, Analytical chemistry, Medical equipment, Products of the textile industry, Clothes, Organic chemicals, Products of the chemical industry, Leather technology, Surface treatment and coating, Construction materials, Aids for disabled or handicapped persons, Protection of and in buildings, Installations in buildings, Spices and condiments. Food additives, Wood, sawlogs and sawn timber, Textile fibres, Radiation measurements, Aerospace fluid systems and components, Pipeline components and pipelines, Structure and structure elements, Food products in general.


Korean Agency for Technology and Standards (KATS), Acrylic Resin Acrylic Content

TH-TISI, Acrylic Resin Acrylic Content

Military Standards (MIL-STD), Acrylic Resin Acrylic Content

Japanese Industrial Standards Committee (JISC), Acrylic Resin Acrylic Content

(U.S.) Ford Automotive Standards, Acrylic Resin Acrylic Content

  • FORD ESA-M4D396-A-1979 ACRYLIC, STYRENE MODIFIED
  • FORD ESF-M4D9-A-2013 ACRYLIC RESIN ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M9H41-A-1978 SHEETING, COTTON - VINYL/ POLYAMIDE/ACRYLIC COATED
  • FORD ESF-M4D9-A-2005 ACRYLIC RESIN ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESP-M8G199-A1-1990 GASKET, CORK - ETHYLENE ACRYLIC BINDER - LARGE GRANULE
  • FORD ESA-M4D396-A-2009 ACRYLIC, STYRENE MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D776-B1-2013 ACRYLIC (PMMA), OPTICAL GRADE, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D776-B1-2014 ACRYLIC (PMMA), OPTICAL GRADE, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M4G290-A-1988 SEALER, ACRYLIC BASED - HEAT CURING - EXTRUDABLE - PAINTABLE
  • FORD ESB-M4D9-A2-2007 ACRYLIC MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M36J1-A1-1996 ENAMEL, THERMOSETTING, ACRYLIC BASECOAT, HIGH SOLIDS, WET ON WET PROCESS EXTERIOR
  • FORD ESP-M8G199-A2-1990 GASKET, CORK - ETHYLENE ACRYLIC BINDER - SMALL GRANULE Shown on ESP-M8G199-A1
  • FORD WSS-M99C113-B-2009 LUBRICANT, TETRAFLUOROETHYLENE - ACRYLIC RESIN BINDER - WATER BORNE - SPRAY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M2D444-A-2004 ETHYLENE/ACRYLIC (AEM) RUBBER, ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WRS-M4D585-C2-2015 POLYCARBONATE/ ACRYLONITRILE BUTADIENE STYRENE BLEND (PC+ABS) MOLDING COMPOUND, RECYCLED 100% PCR/PIR CONTENT POLYCARBONATE RESIN ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D585-C1)
  • FORD ESB-M2G291-A-2002 PRIMER, ADHESION, ACRYLIC - FOR POLYVINYL CHLORIDE WEATHERSTRIPS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M2G291-A-2010 PRIMER, ADHESION, ACRYLIC - FOR POLYVINYL CHLORIDE WEATHERSTRIPS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D776-B5-2014 ACRYLIC (PMMA), TRIM GRADE, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D776-B1)
  • FORD WSS-M4D776-B5-2021 ACRYLIC (PMMA), TRIM GRADE, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D776-B1)
  • FORD SK-M6J9556-A-1994 PRIMER SURFACER, FOR ACRYLIC AND ALKYD ENAMELS, SPRAY APPLICATION AFTER ELECTROCOATING [Replaced: FORD S-M99J4521-A]
  • FORD ESB-M4D489-A2-1999 STYRENE MALEIC ANHYDRIDE COPOLYMER (SMA) RUBBER MODIFIED, 20 % GLASS FIBER/10% ACRYLIC REGRIND REINFORCED
  • FORD WSP-M2D377-A-2004 ETHYLENE/ACRYLIC (AEM) RUBBER, LOW COMPRESSION SET - GROMMET ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M3G133-A-2005 ADHESIVE, FILM, PRESSURE SENSITIVE - ACRYLIC WITH BIOCIDE *** TO BE USED WITH WSS-M99P1111-A ***
  • FORD ESB-M33J100-A-1990 ENAMEL, ACRYLIC, HIGH SOLIDS, LOW VOC, EXTERIOR
  • FORD ESP-M2D373-A-2004 ETHYLENE/ACRYLIC (AEM) RUBBER LOW COMPRESSION SET - OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M4D9-A10-2005 ACRYLIC (PMMA), MEDIUM HEAT DEFLECTION TEMPERATURE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M50J107-A-1980 ENAMEL, ACRYLIC BAKING- INTERMEDIATE SOLIDS - NON-AQUEOUS DISPERSION (NAD), EXTERIOR BODY QUALITY
  • FORD WSB-M3G195-A-2006 TAPE, ACRYLIC BASE, TWO SIDE PRESSURE SENSITIVE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSP-M2D432-A-2004 ETHYLENE/ACRYLIC (AEM) ELASTOMER AUTOMATIC TRANSMISSION CLUTCH PISTON SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M99J228-C-2005 CATALYST, ACID, ACRYLIC REPAIR ENAMELS (50/50 BLEND, MONOBUTYL MALEATE/ MONOBUTYL PHOSPHATE) ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WRS-M4D483-D2-2015 ACRYLONITRILE BUTADIENE STYRENE (ABS) MOLDING COMPOUND, RECYCLED, 100% PIR RESIN CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D483-D1)
  • FORD ESB-M32J106-A-1996 ENAMEL, ACRYLIC BAKING, POLISH RESISTANT, INTERMEDIATE HIGH SOLIDS, EXTERIOR LOW AND MEDIUM GLOSS
  • FORD ESB-M32J126-A-1991 ENAMEL, ACRYLIC BAKING, POLISH RESISTANT, HIGH SOLIDS, EXTERIOR, LOW AND MEDIUM GLOSS
  • FORD WSB-M3G221-A-2006 TAPE, ADHESIVE, PRESSURE SENSITIVE, TWO SIDED, ACRYLIC, MEDIUM TACK, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M80J4-A-2005 CLEAR TOPCOAT, UV CURABLE, ABRASION RESISTANT, TRANSPARENT ACRYLIC PARTS ***TO BE USED WITH FORD WSS-M99P1111-A***

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Acrylic Resin Acrylic Content

  • GB/T 42790-2023 Acrylic copolymer polyvinyl chloride resin
  • GB/T 25264-2010 Solvent-based acrylic resin coatings
  • GB/T 32472-2016 D113 macroporous weak acid acrylic type cation exchange resins
  • GB/T 24147-2009 Waterborne ultraviolet curable resin.Water soluble unsaturated polyester acrylate resin
  • GB/T 8661-1988 Determination of residual acrylonitrile monomer content in acrylonitrile-butadiene-styrene resin by gas chromatography
  • GB/T 12010.6-1989 Determination for sodium acetate contents of polyvinyl alcohol resins
  • GB/T 19861-2005 Determination for strong-base group,weak-base group and weak-acid group exchange capacity of acrylic type anion exchange resins
  • GB/T 15053-1994 Standard method for using radiochromic film and polymthymethacrylate dosimetry systems to measure absorbed dose

Professional Standard - Chemical Industry, Acrylic Resin Acrylic Content

  • HG/T 4758-2014 Water-based acrylic resin coatings
  • HG/T 2166-1991 116 weakly acidic acrylic cation exchange resin
  • HG/T 2164-1991 D113 macroporous weakly acidic acrylic cation exchange resin
  • HG/T 5471～5473-2018 Methyl Methacrylate, Butadiene, Styrene Terpolymer (MBS) Resins, Triallyl Isocyanurate and Polyethylene Oxide (2018)
  • HG/T 3528-1985 Method for Determination of Trace Polyacrylic Acid and Polymaleic Acid in Industrial Circulating Cooling Water
  • HG 5-1597-1985 Method for Determination of Trace Polyacrylic Acid and Polymaleic Acid in Industrial Circulating Cooling Water

Group Standards of the People's Republic of China, Acrylic Resin Acrylic Content

IN-BIS, Acrylic Resin Acrylic Content

Taiwan Provincial Standard of the People's Republic of China, Acrylic Resin Acrylic Content

  • CNS 12143-1987 Acrylic Resin Varnish
  • CNS 4933-1987 Acrylic Resin Baking Enamel
  • CNS 11605-1986 Method of Test for Acrylic Resin Baking Enamel
  • CNS 12144-1987 Method of Test for Acrylic Resin Varnish
  • CNS 2637-1984 Polymethyl Acrylate Resin Treated Waterproof Nylon Cloth
  • CNS 2228-1971 Methylacrylate Sheet for General Use
  • CNS 2638-1984 Method of Test for Polymethyl Acrylate Resin Treated Waterproof Nylon Cloth
  • CNS 9897-1983 Method of Test for Vinyl Acetate Content in EVA Resin
  • CNS 8637-1989 Heat Curing Acrylic Resin for Dental Crown
  • CNS 2229-1971 Method of Test for Methylacrylate Sheet for General Use
  • CNS 9898-1983 Method of Test for Vinyl Acetate Content in EVA Resin (Saponification Method)
  • CNS 8636-1989 Self-Curing Acrylic Resin for Dental Restoration
  • CNS 3278-1971 Method of Test for Polymethylacrylate Corrugated Sheet (Aging Test)
  • CNS 3274-1971 Method of Test for Polymethylacrylate Corrugated Sheet (Load Test)
  • CNS 3276-1971 Method of Test for Polymethylacrylate Corrugated Sheet (Water Absorption)
  • CNS 3280-1971 Method of Test for Polymethylacrylate Corrugated Sheet (Weathering Test)
  • CNS 3277-1971 Method of Test for Polymethylacrylate Corrugated Sheet (Impact Test)
  • CNS 3279-1971 Method of Test for Polymethylacrylate Corrugated Sheet (Tensile Strength)
  • CNS 8641-1988 Roof Coating for Waterproofing (Ropylene Rubber Type)
  • CNS 3275-1971 Method of Test for Polymethylacrylate Corrugated Sheet (Light Penetration)
  • CNS 6604-1980 Determination of Allyl Isothiocyanate in Mustard Seed
  • CNS 13382-14-1995 Implants for Surgery - Acrylic Resin Cements - Part 1: Orthopaedic Applications
  • CNS 13382.14-1995 Implants for Surgery - Acrylic Resin Cements - Part 1: Orthopaedic Applications

British Standards Institution (BSI), Acrylic Resin Acrylic Content

  • BS 6747:1987 Specification for orthodontic resins
  • BS ISO 16402:2008 Implants for surgery. Acrylic resin cement. Flexural fatigue testing of acrylic resin cements used in orthopaedics
  • BS ISO 5833:2002 Implants for surgery - Acrylic resin cements
  • BS ISO 16402:2009 Implants for surgery - Acrylic resin cement - Flexural fatigue testing of acrylic resin cements used in orthopaedics
  • BS ISO 4907-1:2023 Plastics. Ion exchange resin - Determination of exchange capacity of acrylic anion exchange resins
  • BS EN ISO 19065-1:2014 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Designation system and basis for specifications
  • BS ISO 17190-2:2021 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders. Test method for determination of the amount of residual acrylate monomers
  • BS ISO 19699-2:2017 Superabsorbent polymer. Sodium polyacrylate resin for absorbing blood. Specifications
  • 22/30423462 DC BS ISO 4907-1. Plastics. Ion exchange resin. Part 1. Determination of exchange capacity of acrylic anion exchange resins
  • BS EN 15334:2007 Sanitary appliances - Methacrylic dispersions of high filler content
  • BS ISO 19699-1:2017 Superabsorbent polymer. Sodium polyacrylate resin for absorbing blood. Test methods
  • BS ISO/ASTM 51276:2019 Practice for use of a polymethylmethacrylate dosimetry system
  • 19/30394360 DC BS ISO 17190-2. Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders. Part 2. Test method for determination of the amount of residual acrylate monomers
  • BS ISO 15558:1998 Practice for use of a polymethylmethacrylate dosimetry system

Professional Standard - Light Industry, Acrylic Resin Acrylic Content

  • QB/T 1331-1998 Acrylic resin emulsion for tanning
  • QB/T 2223-1996 Test method for acrylic resin emulsion for tanning
  • QB/T 4539-2013 Alcohol and alcohol-water soluble resin for printing ink.Acrylic type (including modified by copolymerization)

General Motors Corporation (GM), Acrylic Resin Acrylic Content

CZ-CSN, Acrylic Resin Acrylic Content

KR-KS, Acrylic Resin Acrylic Content

  • KS P ISO 5833-2012(2022) Implants for surgery－Acrylic resin cements
  • KS P ISO 17190-2-2021 Urine-absorbing aids for incontinence - Polyacrylate superabsorbent powders - Part 2:Test method for determination of the amount of residual acrylate monomers

化学工业部, Acrylic Resin Acrylic Content

  • HG 2166-1991 116 weakly acidic acrylic cation exchange resin

RU-GOST R, Acrylic Resin Acrylic Content

ES-AENOR, Acrylic Resin Acrylic Content

International Organization for Standardization (ISO), Acrylic Resin Acrylic Content

  • ISO 5833:2002 Implants for surgery - Acrylic resin cements
  • ISO 5833:1992 Implants for surgery; acrylic resin cements
  • ISO 16402:2008 Implants for surgery - Acrylic resin cement - Flexural fatigue testing of acrylic resin cements used in orthopaedics
  • ISO 4907-1:2023 Plastics — Ion exchange resin — Part 1: Determination of exchange capacity of acrylic anion exchange resins
  • ISO 5833-1:1979 Implants for surgery — Acrylic resin cements — Part 1: Orthopaedic applications
  • ISO 19699-2:2017 Superabsorbent polymer — Sodium polyacrylate resin for absorbing blood — Part 2: Specifications
  • ISO/ASTM 51276:2002 Practice for use of a polymethylmethacrylate dosimetry system
  • ISO/ASTM 51276:2012 Practice for use of a polymethylmethacrylate dosimetry system
  • ISO 19699-1:2017 Superabsorbent polymer — Sodium polyacrylate resin for absorbing blood — Part 1: Test methods
  • ISO 15558:1998 Practice for use of a polymethylmethacrylate dosimetry system
  • ISO/ASTM 51276:2019 Practice for use of a polymethylmethacrylate dosimetry system
  • ISO 1833-21:2019 Textiles — Quantitative chemical analysis — Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates with certain other fibres (method using cyclohexanone)
  • ISO 1833-12:2006 Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide)

Standard Association of Australia （SAA）, Acrylic Resin Acrylic Content

  • AS 5833:2005 Implants for surgery - Acrylic resin cements
  • AS 2265:1983 SURGICAL IMPLANTS - ACRYLIC RESIN CEMENTS,FOR USE IN SURGERY

Fujian Provincial Standard of the People's Republic of China, Acrylic Resin Acrylic Content

  • DB35/T 1641-2017 Acrylonitrile-styrene-acrylate terpolymer (ASA) synthetic resin tile technical conditions

Professional Standard - Petrochemical Industry, Acrylic Resin Acrylic Content

  • SH 2605.04-2003 D111 Wealy acidic macroporous polyacrylic type cation exchange resins
  • SH 2605.05-2003 D113 Weakly acidic macroporous polyacrylic type cation exchange resins
  • SH 2605.04-1997 D111 macroporous weakly acidic acrylic cation exchange resin
  • SH 2605.05-1997 D113 macroporous weakly acidic acrylic cation exchange resin
  • SH/T 1837-2023 Plastics — Determination of chloride content in Polypropylene resin powder — Potentiometric titration

Professional Standard - Medicine, Acrylic Resin Acrylic Content

  • YY 0459-2003 Implants for surgery-Acrylic resin cements
  • YY/T 1429-2016 Implants for surgery.Acrylic resin cement-Flexural fatigue testing of acrylic resin cements used in orthopaedics

Professional Standard - Agriculture, Acrylic Resin Acrylic Content

American Society for Testing and Materials (ASTM), Acrylic Resin Acrylic Content

  • ASTM D3594-93(2006) Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
  • ASTM D7733-12 Standard Specification for Acrylic Dispersion Ground
  • ASTM D4094-00 Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers
  • ASTM D4094-07 Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers
  • ASTM D6083-97a Standard Specification for Liquid Applied Acrylic Coating Used in Roofing
  • ASTM F3087-15 Standard Specification for Acrylic Molding Resins for Medical Implant Applications
  • ASTM ISO/ASTM 51276-19 Standard Practice for Use of a Polymethylmethacrylate Dosimetry System
  • ASTM ISO/ASTM51276-12 Standard Practice for Use of a Polymethylmethacrylate Dosimetry System
  • ASTM ISO/ASTM51276-19 Standard Practice for Use of a Polymethylmethacrylate Dosimetry System
  • ASTM ISO/ASTM 51276-12 Standard Practice for Use of a Polymethylmethacrylate Dosimetry System

Professional Standard - Commodity Inspection, Acrylic Resin Acrylic Content

  • SN/T 3342-2012 Determination of residual monomers in acrylic resin.Gas chromatography-mass spectrometry

Shanghai Provincial Standard of the People's Republic of China, Acrylic Resin Acrylic Content

工业和信息化部, Acrylic Resin Acrylic Content

  • HG/T 5471-2018 Methyl methacrylate, butadiene, styrene terpolymer (MBS) resin
  • SH/T 1829-2020 Determination of trace element content in plastic polyethylene and polypropylene resins by inductively coupled plasma optical emission spectrometry

Canadian Standards Association (CSA), Acrylic Resin Acrylic Content

GM Europe, Acrylic Resin Acrylic Content

  • GME QK 001909-2007 Blend aus PBT und ASA mit Glasfasern Blend from PBT and ASA with Glass Fibres English/German
  • GME QK 000228-1987 ABS/PC - Blend mit Glasfasern ABS/PC - Blend with Glass Fibres German

Association Francaise de Normalisation, Acrylic Resin Acrylic Content

  • NF EN ISO 1833-12:2020 Textiles - Analyse chimique quantitative - Partie 12 : mélanges d'acrylique, certains modacryliques, certaines chlorofibres, certains élasthannes avec certaines autres fibres (méthode au diméthylformamide)
  • NF D14-400*NF EN 15334:2008 Sanitary appliances - Methacrylic dispersions of high filler content.
  • NF L46-013:1986 Joints toriques - Élastomère butadiene-nitrile acrylique 21A7 - Classe de précision A - Classe de qualité 3.
  • NF G06-006-12:2010 Textiles - Quantitative chemical analysis - Part 12 : mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide).

European Committee for Standardization (CEN), Acrylic Resin Acrylic Content

  • EN 15334:2007 Sanitary appliances - Methacrylic dispersions of high filler content
  • EN ISO 1833-12:2020 Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with certain other fibres (method using dimethylformamide) (ISO 1833-12:2020)
  • EN ISO 1833-12:2010 Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide) (ISO 1833-12:2006)

Danish Standards Foundation, Acrylic Resin Acrylic Content

  • DS/EN 15334:2007 Sanitary appliances - Methacrylic dispersions of high filler content
  • DS/ISO 17190-2:2021 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders – Part 2: Test method for determination of the amount of residual acrylate monomers

Lithuanian Standards Office , Acrylic Resin Acrylic Content

  • LST EN 15334-2007 Sanitary appliances - Methacrylic dispersions of high filler content

AENOR, Acrylic Resin Acrylic Content

  • UNE-EN 15334:2007 Sanitary appliances - Methacrylic dispersions of high filler content

German Institute for Standardization, Acrylic Resin Acrylic Content

  • DIN EN 15334:2007 Sanitary appliances - Methacrylic dispersions of high filler content English version of DIN EN 15334:2007-05
  • DIN EN 15334:2007-05 Sanitary appliances - Methacrylic dispersions of high filler content; German version EN 15334:2007
  • DIN 29502-1:1986 Aerospace; edge reinforcements for aircraft glazings of fabric reinforced acrylic resins; directives for design
  • DIN 54217:1975 Testing of textiles; quantitative analysis of binary mixtures, acrylic, modacrylic and certain polyvinyl chloride fibres with other fibres, dimethyl formamide method

RO-ASRO, Acrylic Resin Acrylic Content

  • STAS 10054-1975 PLASTICS Determination of the acetone soluble matter (resin content) of phenolic moulding materials
  • STAS 10577-1982 POLYACRIL KUBBER General technical requirements for quality

YU-JUS, Acrylic Resin Acrylic Content

  • JUS F.S3.150-1992 Textile. Testing of mixtures of fibres. Determination of nitrogen content for identification of acrylic and modacrylic fibres

Indonesia Standards, Acrylic Resin Acrylic Content

  • SNI 01-7147-2005 Test methods of formaldehyde emissions for laminated timber and veneer by acrylic desiccator methods

Professional Standard - Machinery, Acrylic Resin Acrylic Content

ZA-SANS, Acrylic Resin Acrylic Content

  • SANS 1833-12:2007 Textiles - Quantitative chemical analysis Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide)

Professional Standard - Textile, Acrylic Resin Acrylic Content

  • FZ/T 10016-2011 Testing method for polyacrylic sizes used in textile warp sizing.Determination of involatile substance content
  • FZ/T 10017-2011 Testing method for polyacrylic sizes used in textile warp sizing.Determination of residual monomer content
  • FZ/T 10016-2020 Test method for polyacrylic acid size for textile warp yarn sizing Non-volatile content determination

CH-SNV, Acrylic Resin Acrylic Content

American National Standards Institute （ANSI), Acrylic Resin Acrylic Content

Anhui Provincial Standard of the People's Republic of China, Acrylic Resin Acrylic Content

  • DB34/T 2434-2015 Quantitative chemical analysis of textiles blends of polyacrylonitrile fibers, certain modacrylic fibers and cotton (formic acid/zinc chloride method)

Aerospace, Security and Defence Industries Association of Europe (ASD), Acrylic Resin Acrylic Content

  • ASD-STAN PREN 4365-2001 Aerospace Series Heat and Crazing Resistant Cast Acrylic, Crosslinked, and Low Moisture Absorption Properties (Edition P 1)

Military Standard of the People's Republic of China-General Armament Department, Acrylic Resin Acrylic Content

  • GJB 533.18-1988 Detection methods for 45 components of submarine cabin air Determination of acrolein content Tryptophan absorbance method

  Acrylic resin water-based paint, Waterborne Acrylic Coatings, Waterborne Acrylic Coatings, acrylic paint, Waterborne Acrylic Resin, Acrylic acid content, Acrylic acid content, what to use for acrylic resin, Acrylic, Acrylic content, content acrylic acid, Acrylic resin naphthalene content, Acrylic content, acrylic temperature, acrylic paint, Acrylic Resin Acrylic Content, Acrylic + content, Methacrylic resin, Acrylic acid monomer content in acrylic resin, polyacrylic resin.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved