ZH
RU
ES

tensile strength

tensile strength, Total:499 items.

In the international standard classification, tensile strength involves: Materials for aerospace construction, Waxes, bituminous materials and other petroleum products, Leather technology, Analytical chemistry, Metalliferous minerals, Textile fibres, Fibre optic communications, Products of the textile industry, Paper and board, Products of the chemical industry, Testing of metals, Plastics, Iron and steel products, Construction materials, Conducting materials, Wood technology processes, Insulating fluids, Ferrous metals, Adhesives, Surface treatment and coating, Fasteners, Ceramics, Refractories, Continuous handling equipment, Electrical accessories, Mechanical testing, Earthworks. Excavations. Foundation construction. Underground works, Equipment for the chemical industry, Electronic components in general, Fasteners for aerospace construction, Powder metallurgy, Materials for the reinforcement of composites, Non-textile floor coverings, Sports equipment and facilities, Inorganic chemicals, Cutting tools, Wood-based panels, Mining and quarrying, Footwear, Pulps, Structures of buildings, Reinforced plastics, Processes of the textile industry, Welding, brazing and soldering, Rubber, Seals, glands, Electrical and electronic testing, Springs, Jewellery, Flexible drives and transmissions, Rubber and plastics products, Protection of and in buildings, Water quality, Chipless working equipment, Fluid power systems, Wastes, Aerospace electric equipment and systems, Aerospace fluid systems and components.


British Standards Institution (BSI), tensile strength

  • BS 2TA 56:2009 Specification for plate of titanium-aluminium-vanadium alloy (tensile strength 895-1150 MPa) (maximum thickness 100 mm)
  • BS ISO 3781:2011 Paper and board. Determination of tensile strength after immersion in water
  • BS EN 15870:2009 Adhesives - Determination of tensile strength of butt joints
  • BS ISO 15754:2009 Paper and board - Determination of z-directional tensile strength
  • BS EN ISO 21180:2013 Light conveyor belts. Determination of the maximum tensile strength
  • BS EN 60793-1-31:2002 Optical fibres - Measurement methods and test procedures - Tensile strength
  • BS EN 60793-1-31:2010 Optical fibres. Measurement methods and test procedures. Tensile strength
  • 2TA 10-1974 Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa)
  • BS ISO 3342:2011 Textile glass. Mats. Determination of tensile breaking force
  • BS 2TA 10:1974 Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa)
  • BS EN 13864:2004 Surfaces for sports areas - Determination of tensile strength of synthetic yarns
  • 2TA 5-1973 Specification for forgings of commercially pure titanium (tensile strength 390-540 N/mm)
  • 2TA 9-1973 Specification for forgings of commercially pure titanium (tensile strength 540-740 N/mm)
  • 2TA 23-1973 Specification for forging stock of titanium-copper alloy (tensile strength 540-770 N/mm)
  • 2TA 24-1973 Specification for forgings of titanium-copper alloy (tensile strength 540-770 N/mm)
  • BS EN ISO 17706:2018 Footwear. Test methods for uppers. Tensile strength and elongation
  • BS EN 12803:2000 Footwear - Test methods for outsoles - Tensile strength and elongation
  • BS EN 12803:2000(2004) Footwear - Test methods for outsoles - Tensile strength and elongation
  • 2TA 1-1974 Specification for sheet and strip of commercially pure titanium (tensile strength 290-420 MPa)
  • BS 3TA 10:2009 Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa)
  • BS 2TA 59:2009 Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 920-1180 MPa)
  • BS 2TA 1:1974 Specification for sheet and strip of commercially pure titanium (tensile strength 290-420 MPa)
  • BS TA 59:1980 Specification for sheet and strip of titanium-aluminium-vanadium alloy (tensile strength 920 MPa to 1180 MPa)
  • 2TA 4-1973 Specification for forging stock of commercially pure titanium (tensile strength 390-540 N/mm)
  • 2TA 8-1973 Specification for forging stock of commercially pure titanium (tensile strength 540-740 N/mm)
  • BS 3TA 21:2009 Specification for sheet and strip of titanium-copper alloy (tensile strength 540-700 MPa)
  • BS 3TA 2:2009 Specification for sheet and strip of commercially pure titanium (tensile strength 390-540 MPa)
  • BS TA 58:1974 Specification for plate of titanium-copper alloy (tensile strength 520-640 MPa) (maximum thickness 10 mm)
  • BS 2TA 5:1973 Specification for forgings of commercially pure titanium (tensile strength 390-540 N/mm2)
  • BS 2TA 24:1973 Specification for forgings of titanium-copper alloy (tensile strength 540-770 N/mm2)
  • BS 2TA 8:1973 Specification for forging stock of commercially pure titanium (tensile strength 540-740 N/mm2)
  • BS 2TA 9:1973 Specification for forgings of commercially pure titanium (tensile strength 540-740 N/mm2)
  • BS 2TA 23:1973 Specification for forging stock of titanium-copper alloy (tensile strength 540-770 N/mm2)
  • BS A 31-54:1951 Specification for British Association (B.A.) low tensile screws and nuts for aeronautical purposes
  • 2TA 2-1973 Specification for sheet and strip of commercially pure titanium (tensile strength 390-540 N/mm)
  • 2TA 6-1973 Specification for sheet and strip of commercially pure titanium (tensile strength 570-730 N/mm)
  • 2TA 21-1973 Specification for sheet and strip of titanium-copper alloy (tensile strength 540-700 N/mm)
  • 2TA 22-1973 Specification for bar and section for machining of titanium-copper alloy (tensile strength 540-770 N/mm)
  • BS 2TA 52:2009 Specification for sheet and strip of titanium- copper alloy (tensile strength 690-920 MPa)
  • BS 3TA 7:2009 Specification for bar and section for machining of commercially pure titanium (tensile strength 540-740 MPa)
  • BS EN 1608:2013 Thermal insulating products for building applications. Determination of tensile strength parallel to faces
  • BS 3TA 6:2009 Specification for sheet and strip of commercially pure titanium (tensile strength 570-730 MPa)
  • BS EN IEC 60793-1-31:2019 Tracked Changes. Optical fibres. Measurement methods and test procedures. Tensile strength
  • BS 3TA 1:2009 Specification for sheet and strip of commercially pure titanium (tensile strength 290-420 MPa)
  • BS 2922-2:1984 Strength of wet paper and board - Method for determination of the tensile strength of paper and board after immersion in water
  • BS TA 56:1974 Specification for plate of titanium-aluminium-vanadium alloy (tensile strength 895-1150 MPa) (maximum thickness 100 mm)
  • BS EN ISO 3376:2011 Leather. Physical and mechanical tests. Determination of tensile strength and percentage extension
  • BS A 274:1981 Specification for procurement of alloy steel bolts, metric, with a minimum tensile strength of 1100 MPa
  • BS 2TA 58:2009 Specification for plate of titanium-copper alloy (tensile strength 520-640 MPa) (maximum thickness 10 mm)
  • BS 2TA 4:1973 Specification for forging stock of commercially pure titanium (tensile strength 390-540 N/mm2)
  • BS EN 2591-417:2001 Elements of electrical and optical connection - Test methods - Tensile strength (crimped connection)
  • BS EN 1607:2013 Thermal insulating products for building applications. Determination of tensile strength perpendicular to faces
  • BS A 31-54:1951+A6:2012 Specification for British Association (B.A.) low tensile screws and nuts for aeronautical purposes
  • BS TA 57:1974 Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1030-1220 MPa) (maximum thickness 65 mm)
  • BS ISO 4347:2015 Leaf chains, clevises and sheaves. Dimensions, measuring forces, tensile strengths and dynamic strengths
  • BS 2TA 12:1974 Specification for forging stock of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)
  • BS 2TA 13:1974 Specification for forgings of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)
  • BS EN 1608:1997 Thermal insulating products for building applications - Determination of tensile strength parallel to faces
  • BS EN 1607:1997 Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces
  • 2TA 3-1973 Specification for bar and section for machining of commercially pure titanium (tensile strength 390-540 N/mm)
  • 2TA 7-1973 Specification for bar and section for machining of commercially pure titanium (tensile strength 540-740 N/mm)

RO-ASRO, tensile strength

  • STAS 10077-1975 EBONITE Determination of tensile strength
  • STAS 6834-1975 Tests of metals TENSILE TEST AT LOW TEMPERATURES
  • STAS 8915-1978 CONVEYOR BELTS Determination of full thickness tensile strcngh and elongation
  • STAS 8665-1970 TESTING OF TENSILE STRENGTH AND ELONGATION AT BREAK OF FLEXIBLE CELLULAR MATERIALS

Association Francaise de Normalisation, tensile strength

  • NF T60-127:1974 Tensile strength of paraffin wax.
  • NF A91-211:1994 Thermal spraying. Determination of tensile adhesive strength.
  • NF T47-156*NF EN ISO 21180:2013 Light conveyor belts - Determination of the maximum tensile strength
  • NF T76-123:1993 Adhesives. Determination of tensile strength of butt joints.
  • NF G52-007:1976 Determination of extension and tensile strength of the surface of a leather.
  • NF P90-134*NF EN 13864:2004 Surfaces for sports areas - Determination of tensile strength of synthetic yarns
  • NF P75-211:1997 Thermal insulating products for building applications. Determination of tensile strength perpendicular to faces.
  • NF P75-212:1997 Thermal insulating products for building applications. Determination of tensile strength parallel to faces.
  • NF P94-422:2001 Roches - Détermination de la résistance à la traction - Méthode indirecte - Essai brésilien
  • NF P75-212*NF EN 1608:2013 Thermal insulating products for building applications - Determination of tensile strength parallel to faces
  • NF E26-107:2004 Leaf chains, clevises and sheaves - Dimensions, measuring forces and tensile strengths.
  • NF P75-211*NF EN 1607:2013 Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces
  • NF T48-103:1994 Asbestos and rubber compressed sheets for seals. Determination of tensile strength.
  • NF G52-002:1976 DETERMINATION OF STRENGTH AND ELONGATION OF LEATHER UNDER TRACTION.
  • NF Q03-056:1973 Paper and board tests. Determination of the wet tensile strength of paper and board.
  • NF P98-283:1992 Tests relating to pavements. Waterproofing materials for structures. Determination of tensile strength and deformation.
  • NF E26-107*NF ISO 4347:2015 Leaf chains, clevises and sheaves - Dimensions, measuring forces, tensile strengths and dynamic strengths
  • NF G52-002:2012 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension.
  • NF C93-840-1-31:2011 Optical fibres - Part 1-31 : measurement methods and test procedures - Tensile strength.
  • NF T76-052:2006 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91).

Taiwan Provincial Standard of the People's Republic of China, tensile strength

  • CNS 1278-1981 Method of Test for Tensile Strength of Leather
  • CNS 5605-1980 Method of Determination for Tensile Strength of Adhesives
  • CNS 5366-1980 Indirected Test Method for Tensile Strength of Rock
  • CNS 1011-1983 Method of Test for Tensile Strength of Hydraulic Cement Mortar
  • CNS 13957-1997 Method of test for tensile strength of fine ceramics at room and elevated temperature
  • CNS 9532-1982 Method of Test for Direct Tensile Strength of Intact Rock Core Specimens
  • CNS 13039-1992 Covered electrodes for low alloy high tensile strength steel
  • CNS 13483-1995 Method of Test for Breaking Load and Elongation of Geotextiles (Grab Method)
  • CNS 5141-1980 Method of Test for Tensile Strength and Elongation at Break of Ebonite
  • CNS 10933-1984 Method of Test for Fiber Optic Devices (Cable Jacket Elongation and Tensile Strength)

RU-GOST R, tensile strength

  • GOST 938.11-1969 Leather. Tensile strength test
  • GOST 11262-1980 Plastics. Tensile strength test method
  • GOST R ISO 3781-2016 Paper and board. Determination of tensile strength after immersion in water
  • GOST 15613.3-1977 Massive glued wood. Method for determination of ultimate strength in tension of glued butt joint
  • GOST 9622-1987 Laminated glued wood. Methods for determination of ultimate strenght and modulus of elasticity in tension
  • GOST R 57159-2016 Timber structures. Test method for pull-through resistance of timber fasteners
  • GOST R 57867-2017 Polymer composites. Test methods for determination of pull-through resistance
  • GOST 473.7-1981 Chemically resistant and heat resistant ceramic wapes. The method for determination of tensile strength
  • GOST ISO 17706-2013 Footwear. Test methods for uppers. Tensile strength and elongation
  • GOST R 56763-2015 Polymer composites. Method for determination of tensile strength of sandwich core materials
  • GOST 23409.16-1978 Moulding sand mixtures. Method for determination of tensile strength limit in moisture condensation zone

Korean Agency for Technology and Standards (KATS), tensile strength

Japanese Industrial Standards Committee (JISC), tensile strength

  • JIS L 1069:1995 Tensile strength tests of natural fibres
  • JIS A 1113:2018 Method of test for splitting tensile strength of concrete
  • JIS L 1069 AMD 1:2008 Tensile strength tests of natural fibres (Amendment 1)
  • JIS R 1630:1997 Test methods for tensile strength of fine ceramic joint
  • JIS G 5111:1991 High tensile strength carbon steel castings and low alloy steel castings for structural purposes
  • JIS A 1185:1995 Method of test for splitting tensile strength of polyester resin concrete
  • JIS K 6557-2:2016 Leather -- Physical and mechanical tests -- Determination of tensile strength and percentage extension

SE-SIS, tensile strength

American National Standards Institute （ANSI), tensile strength

BR-ABNT, tensile strength

International Organization for Standardization (ISO), tensile strength

  • ISO 1924:1976 Paper and board — Determination of tensile strength
  • ISO 1924:1974 Title missing - Legacy paper document
  • ISO/TR 10108:1989 Steel; conversion of hardness values to tensile strength values
  • ISO 4108:1980 Concrete; Determination of tensile splitting strength of test specimens
  • ISO 21180:2005 Light conveyor belts - Determination of the maximum tensile strength
  • ISO 21180:2013 Light conveyor belts - Determination of the maximum tensile strength
  • ISO 17706:2003 Footwear - Test methods for uppers - Tensile strength and elongation
  • ISO 22654:2002 Footwear - Test methods for outsoles - Tensile strength and elongation
  • ISO 14590:1999 Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
  • ISO 14590:2005 Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
  • ISO 14590:2016 Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
  • ISO 4347:2004 Leaf chains, clevises and sheaves - Dimensions, measuring forces and tensile strengths
  • ISO 12625-5:2016 Tissue paper and tissue products - Part 5: Determination of wet tensile strength
  • ISO 283:1980 Full thickness tensile strength and elongation of conveyor belts — Specifications and method of test
  • ISO 4347:2015 Leaf chains, clevises and sheaves - Dimensions, measuring forces, tensile strengths and dynamic strengths

YU-JUS, tensile strength

TR-TSE, tensile strength

  • TS 2027-1975 DETERMINATION OF DIRECT TENSILE STRBNGTH OF ROCKS
  • TS 245-1965 METHOD OF DETERMINING THE TENSILE STRENGHT AND ELNGATION OF A SINGLE STRAND YARN

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, tensile strength

  • GB/T 8641-1988 Thermal sprayed coatings--Determination of tensile strength
  • GB/T 8721-2009 Method for the determination of tensile strength of carbonaceous materials
  • GB/T 8721-2019 The test method for tensile strength of carbon materials
  • GB/T 14017-2009 Method of testing in tensile strength perpendicular to grain of wood
  • GB/T 1938-2009 Methods of testing in tensile strength parallel to grain of wood
  • GB/T 8721-1988 Method for the determination of tensile strength of carbonaceous materials
  • GB/T 14017-1992 Method of testing in tensile strength perpendicular to grain of wood
  • GB/T 1938-1991 Method of testing in tensile stength parallel to grain of wood
  • GB/T 11718.7-1989 Medium density fiberboard--Determination of flush tensile strength
  • GB/T 21921-2008 Test method for tensile strength of impermeable graphite materials
  • GB/T 10423-2002 Sintered metal friction materials--Determination of tensile strength
  • GB/T 17911.5-1999 Refractory ceramic fibre products--Determination of tensile strength
  • GB/T 13465.9-2009 Test method of the adhesion tensile strength of graphite impermeable adhesion agent
  • GB/T 28487-2012 Precious metal alloys chains.Determination of tensile strength.Method of tensile testing
  • GB/T 7991.9-2014 Test method of viterous and porcelain enamels.Part 9:Determination of adhesion tensile strength
  • GB/T 6074-2006 Leaf chains,clevises and sheaves.Dimensions,measuring forces and tensile strengths
  • GB/T 30804-2014 Thermal insulating products for building applications.Determination of tensile strength perpendicular to faces

Danish Standards Foundation, tensile strength

  • DS/EN 26922:1994 Adhesives-Determination of tensile strength of butt joints
  • DS 423.24:1984 Testing of concrete. Hardened concrete. Tensile strength
  • DS/EN 1608:2013 Thermal insulating products for building applications - Determination of tensile strength parallel to faces
  • DS/EN 1607:2013 Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces
  • DS/EN 319:1993 Particleboards and fibreboards. Determination of tensile strength perpendicular to the plane of the board
  • DS/EN 60793-1-31:2011 Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength
  • DS/EN 319:1994 Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board
  • DS 423.34:1985 Testing of concrete. Tensile strength deduced from splitting test on cylindrical specimens

KR-KS, tensile strength

Professional Standard - Non-ferrous Metal, tensile strength

  • YS/T 542-2006 Determination of tensile strength of thermal sprayed coatings

GM North America, tensile strength

Indonesia Standards, tensile strength

  • SNI 03-4812-1998 Test method for direct tensile strength of concrete
  • SNI 07-6403-2000 Specification for low and medium tensile strength carbon steel plates
  • SNI 2486-2011 Cara uji kuat tarik tidak langsung batu di laboratorium
  • SNI ASTM A325:2012 Structual bolts, Steel, Heat Treated 830 MPa minimum tensile strength (metric)
  • SNI 2491-2014 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

PT-IPQ, tensile strength

CH-SNV, tensile strength

American Society for Testing and Materials (ASTM), tensile strength

  • ASTM A70-44 Specification for Low and Intermediate Tensile Strength Carbon-Steel
  • ASTM D2209-00(2004) Standard Test Method for Tensile Strength of Leather
  • ASTM D2209-00 Standard Test Method for Tensile Strength of Leather
  • ASTM D2209-00(2010) Standard Test Method for Tensile Strength of Leather
  • ASTM A679/A679M-00 Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
  • ASTM A679/A679M-17 Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
  • ASTM A679/A679M-06(2012) Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
  • ASTM A283/A283M-03(2007) Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
  • ASTM D8480-23 Standard Test Method for Determining the Tensile Strength of GCCM Materials
  • ASTM D6644-01(2007) Standard Test Method for Tension Strength of Sew-Through Flange Buttons
  • ASTM D6644-01(2002) Standard Test Method for Tension Strength of Sew-Through Flange Buttons
  • ASTM A283/A283M-12 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
  • ASTM A78-43 Specification for Low Tensile Strength Carbon-Steel Plates of Structured Quality for Welding
  • ASTM D6644-01(2013) Standard Test Method for Tension Strength of Sew-Through Flange Buttons
  • ASTM D6768-04 Standard Test Method for Tensile Strength of Geosynthetic Clay Liners
  • ASTM D6768-04(2009) Standard Test Method for Tensile Strength of Geosynthetic Clay Liners
  • ASTM A307-97 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strangth
  • ASTM D6768/D6768M-04(2015)e2 Standard Test Method for Tensile Strength of Geosynthetic Clay Liners
  • ASTM C1366-04(2013) Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
  • ASTM C1557-14 Standard Test Method for Tensile Strength and Young’s Modulus of Fibers
  • ASTM C363/C363M-16 Standard Test Method for Node Tensile Strength of Honeycomb Core Materials
  • ASTM A283/A283M-12a Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
  • ASTM A283/A283M-13 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
  • ASTM D2936-95 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
  • ASTM D2936-95(2001)e1 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
  • ASTM A285/A285M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
  • ASTM D3967-05 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
  • ASTM D3967-95a(2001) Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
  • ASTM D3967-95a Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
  • ASTM D3759/D3759M-05 Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes
  • ASTM C1557-03 Standard Test Method for Tensile Strength and Young''s Modulus of Fibers
  • ASTM C1557-03e1 Standard Test Method for Tensile Strength and Young''s Modulus of Fibers
  • ASTM C297/C297M-04 Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
  • ASTM D3967-95a(2004) Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
  • ASTM A307-04e1 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
  • ASTM F1093-99(2023) Standard Test Methods for Tensile Strength Characteristics of Oil Spill Response Boom
  • ASTM D6768/D6768M-04(2015)e1 Standard Test Method for Tensile Strength of Geosynthetic Clay Liners
  • ASTM C1557-03(2008) Standard Test Method for Tensile Strength and Young''s Modulus of Fibers
  • ASTM D2936-20 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
  • ASTM D3967-08 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
  • ASTM D3967-16 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
  • ASTM A285-78 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
  • ASTM A285/A285M-90(1996)e1 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
  • ASTM A285/A285M-90(2001) Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
  • ASTM A307-07 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
  • ASTM A307-07a Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
  • ASTM D2936-95(2004)e1 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
  • ASTM D2936-95(2001) Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
  • ASTM A307-03 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
  • ASTM C1273-05 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
  • ASTM C1366-04 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
  • ASTM D6768-02 Standard Test Method for Tensile Strength of Geosynthetic Clay Liners
  • ASTM A307-04 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
  • ASTM C1366-97 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
  • ASTM D2936-08 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
  • ASTM C1366-04(2009) Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
  • ASTM C1273-05(2010) Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
  • ASTM A307-07b Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
  • ASTM A150-36 Specification for High Tensile Strength Carbon-Silicon Steel Plates for Boilers and Other Pressure Vessel
  • ASTM C1144-89(1997) Standard Test Method for Splitting Tensile Strength for Brittle Nuclear Waste Forms
  • ASTM A325M-03 Standard Specification for Structural Bolts, Steel, Heat Treated 830 Mpa Minimum Tensile Strength [Metric]
  • ASTM D2095-96(2023) Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
  • ASTM C297/C297M-04(2010) Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
  • ASTM A307-14e1 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
  • ASTM A307-10 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
  • ASTM F3125/F3125M-22 Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 M
  • ASTM F3125/F3125M-18 Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
  • ASTM C1273-95a(2000) Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
  • ASTM A307-00 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
  • ASTM A325-02 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
  • ASTM A325-00 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
  • ASTM A307-02 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
  • ASTM C496/C496M-02 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
  • ASTM C496/C496M-04 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

German Institute for Standardization, tensile strength

  • DIN 50125:2016 Testing of metallic materials - Tensile test pieces
  • DIN 50125:2009 Testing of metallic materials - Tensile test pieces
  • DIN 51914:1985 Testing of carbon materials; determination of tensile strength; solid matters
  • DIN ISO 3781:2012 Paper and board - Determination of tensile strength after immersion in water (ISO 3781:2011)
  • DIN EN 13864:2004 Surfaces for sports areas - Determination of tensile strength of synthetic yarns; German version EN 13864:2004
  • DIN 52377:1978 Testing of plywood; determination of modulus of elasticity in tension and of tensile strength
  • DIN 52377:2016 Testing of plywood - Determination of modulus of elasticity in tension and of tensile strength
  • DIN EN 319:1993 Particleboards and fibreboards; determination of tensile strength perpendicular to the plane of the board; German version EN 319:1993
  • DIN EN ISO 3376:2003 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2002); German version EN ISO 3376:2002
  • DIN EN ISO 3376:2012 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2011); German version EN ISO 3376:2011
  • DIN EN ISO 1421:1998 Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:1998); German version EN ISO 1421:1998

IN-BIS, tensile strength

PK-PSQCA, tensile strength

  • PS 151-1961 Method for Determination of Tensile strength and elongation of single yarns.

HU-MSZT, tensile strength

Society of Automotive Engineers (SAE), tensile strength

  • SAE AMS3345E-1992 Silicone Rubber 1000 psi (6.90 MPa) Tensile Strength 45 - 55
  • SAE AMS6315C-1946 Steel 1.8ni .25mo (0.38 - 0.43c) Heat Treated (105,000 Tensile Strength)
  • SAE AMS5315B-1981 DUCTILE (NODULAR) IRON CASTINGS, SAND 60,000 psi (414 MPa) Tensile Strength
  • SAE AMS5316D-2013 Ductile (Nodular) Iron Castings, Sand 80,000 psi (550 MPa) Tensile Strength As Cast
  • SAE AMS2310-1960 TRANSVERSE STRENGTH AND DUCTILITY REQUIREMENTS FOR STEEL Tensile Strength 260,000 psi, min
  • SAE AMS2310A-1963 TRANSVERSE STRENGTH AND DUCTILITY REQUIREMENTS FOR STEEL Tensile Strength 260,000 psi, min
  • SAE AMS3349C-1993 Silicone (VMQ) Rubber 1100 psi (7.58 MPa) Tensile Strength, High Resiliency 65 - 75
  • SAE AMS3348C-1994 Silicone (VMQ) Rubber 1150 psi (7.93 MPa) Tensile Strength, High Resiliency 25 - 35
  • SAE AMS5316C-2011 DUCTILE (NODULAR) IRON CASTINGS, SAND 80,000 psi (550 MPa) Tensile Strength As Cast
  • SAE AMS5316B-1982 DUCTILE (NODULAR) IRON CASTINGS, SAND 80,000 psi (550 MPa) Tensile Strength As Cast
  • SAE AMS6367-2002 Steel Tubing, (Seamless), Round Chromium Molybdenum (.32 - .39 Carbon) (150,000 Tensile Strength)
  • SAE AMS6368-2002 Steel Tubing, (Seamless), Round Chromium Molybdenum (.32 - .39 Carbon) (200,000 Tensile Strength)
  • SAE AMS6366-2002 Steel Tubing, (Seamless), Round Chromium Molybdenum (.32 - .39 Carbon) (125,000 Tensile Strength)
  • SAE AMS3348D-2014 Silicone (VMQ) Rubber 1150 Psi (7.93 MPa) Tensile Strength, High Resiliency 25-35
  • SAE AMS3349D-2014 Silicone (VMQ) Rubber, 1100 psi (7.58 MPa) Tensile Strength, High Resiliency, 65 - 75
  • SAE TS24-7-2019 TS24 Manufacturing Specification for Bolts 1275 MPa (185,000 lbf/in²) Tensile Strength at Room Temperature 1000 MPa (145,000 lbf/in²) Tensile Strength at 650°C
  • SAE AMS3892/12-1992 Tow, Carbon Fiber for Structural Composites 730 (5033) Tensile Strength, 41 (283) Tensile Modulus
  • SAE AMS3892/11A-1992 Tow, Carbon Fiber for Structural Composites 450 (3103) Tensile Strength, 32 (221) Tensile Modulus
  • SAE AMS3892/10A-1992 Tow, Carbon Fiber for Structural Composites 550 (3792) Tensile Strength, 38 (262) Tensile Modulus
  • SAE AMS3892/9B-1992 Tow, Carbon Fiber for Structural Composites 500 (3447) Tensile Strength, 32 (221) Tensile Modulus
  • SAE AMS5637D-1981 STEEL BARS, CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30302) Cold Drawn, 125,000 psi (860 MPa) Tensile Strength
  • SAE AMS5637C-1979 STEEL BARS, CORROSION RESISTANT 18Cr - 8.5Ni (SAE 30302) Cold Drawn, 125,000 psi (862 MPa) Tensile Strength
  • SAE AMS5636C-1981 STEEL BARS CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30302) Cold Drawn, 100,000 psi (690 MPa) Tensile Strength
  • SAE AMS3892/6A-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF 325 (2241) Tensile Strength, 57 (393) Tensile Modulus
  • SAE AMS3892/5B-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF 220 (1517) Tensile Strength, 75 (517) Tensile Modulus
  • SAE AMS3892/4B-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength, 75 (517) Tensile ModuluS
  • SAE AMS3892/2B-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength, 50 (345) Tensile Modulus
  • SAE AMS3892/1B-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF 400 (2758) Tensile Strength, 33 (228) Tensile Modulus
  • SAE AMS3349C-2007 Silicone (VMQ) Rubber 1100 psi (7.58 MPa) Tensile Strength, High Resiliency 65 - 75
  • SAE AMS5693-1982 STEEL WIRE, CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30302) Cryogenically Produced, High Tensile Strength
  • SAE AMS5693A-1988 STEEL WIRE, CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30302) Cryogenically Produced, High Tensile Strength
  • SAE AMS6362E-1999 Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 150 ksi (1034 MPa) Tensile Strength
  • SAE AMS6365A-2018 Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 150 ksi (1034 MPa) Tensile Strength
  • SAE AMS6361E-2009 Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 125 ksi (862 MPa) Tensile Strength
  • SAE AMS6362D-1994 STEEL TUBING, SEAMLESS 0.95Cr - 0.20Mo (0.28-0.33C) (SAE 4130) 150,000 psi (1034 MPa) Tensile Strength
  • SAE AMS6362F-2009 Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 150 ksi (1034 MPa) Tensile Strength
  • SAE AMS6362A-1972 STEEL TUBING, SEAMLESS 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 150,000 psi (1034 MPa) Tensile Strength
  • SAE AS7472A-2010 Bolts and Screws, Steel, Corrosion Resistant 125 000 psi Tensile Strength Roll Threaded
  • SAE AS7472-1991 Bolts and Screws, Steel, Corrosion Resistant 125 000 psi Tensile Strength Roll Threaded
  • SAE AS7475C-2007 Bolts, Cobalt-Chromium-Nickel Alloy, UNS R30159, Tensile Strength 260 ksi, Procurement Specification
  • SAE AS7468B-2012 Bolts, Cobalt-Chromium-Nickel Alloy UNS R30035, Tensile Strength 260 ksi, Procurement Specification
  • SAE AS7475D-2015 Bolts, Cobalt-Chromium-Nickel Alloy, UNS R30159, Tensile Strength 260 ksi, Procurement Specification
  • SAE AS4506B-2015 Bolts and Screws, Steel, UNS S66286 Tensile Strength 160 ksi, Procurement Specification
  • SAE AS4506A-2004 Bolts and Screws, Steel, UNS S66286 Tensile Strength 160 ksi, Procurement Specification
  • SAE AS7477D-2004 Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specification
  • SAE AS7477G-2017 Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specification
  • SAE AMS5315C-2011 DUCTILE (NODULAR) IRON CASTINGS, SAND 60,000 psi (415 MPa) Tensile Strength Ferritize Annealed
  • SAE AMS6531-2002 Steel Tubing (Seamless) Round 0.55ni 0.5cr 0.2mo (0.27 - 0.33c) Heat Treated (125,000 Tensile Strength)
  • SAE AS7477H-2020 Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specification
  • SAE AS4506C-2021 Bolts and Screws, Steel, UNS S66286 Tensile Strength 160 ksi, Procurement Specification
  • SAE AS7472B-2021 Bolts and Screws, Steel, Corrosion Resistant 125000 psi Tensile Strength Roll Threaded
  • SAE AS7468C-2020 Bolts, Cobalt-Chromium-Nickel Alloy UNS R30035, Tensile Strength 260 ksi, Procurement Specification
  • SAE AS7475E-2020 Bolts, Cobalt-Chromium-Nickel Alloy, UNS R30159, Tensile Strength 260 ksi, Procurement Specification
  • SAE AMS3892/8A-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength, 40 (276) Tensile Modulus
  • SAE AMS3892/7A-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength, 33 (228) Tensile Modulus
  • SAE AMS3892/3B-1992 Tow or Yarn, Carbon Fibers for Structural Composites GF 400 (2758) Tensile Strength, 40 (276) Tensile Modulus
  • SAE AMS03/4A-2017 The Pre-Treatment and Protection of Steel Items of Specified Maximum Tensile Strength Exceeding 1450 MPa
  • SAE AMS03/4-2015 The Pre-Treatment and Protection of Steel Items of Specified Maximum Tensile Strength Exceeding 1450 MPa
  • SAE AS7472A-2015 Bolts and Screws, Steel, Corrosion Resistant 125 000 psi Tensile Strength Roll Threaded
  • SAE AS7472-2006 Bolts and Screws, Steel, Corrosion Resistant 125 000 psi Tensile Strength Roll Threaded
  • SAE AMS5315D-2013 Ductile (Nodular) Iron Castings, Sand 60,000 psi (415 MPa) Tensile Strength Ferritize Annealed
  • SAE AMS6361D-2000 Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 125 ksi (862 MPa) Tensile Strength UNS G41300
  • SAE AMS6374A-1994 STEEL TUBING, SEAM-FREE, ROUND 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 95,000 psi (655 MPa) Tensile Strength
  • SAE AMS6361C-1994 STEEL TUBING, SEAMLESS ROUND 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 125,000 psi (862 MPa) Tensile Strength
  • SAE AMS6374C-2010 Steel Tubing, Seam-Free, Round 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 95.0 ksi (655 MPa) Tensile Strength
  • SAE AMS6374E-2020 Steel Tubing, Seam-Free, Round 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 95.0 ksi (655 MPa) Tensile Strength
  • SAE J2833-2009 Welded and Cold-Drawn, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending and Flaring
  • SAE AMS5518N-2020 Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 150 ksi (1034 MPa) Tensile Strength
  • SAE AMS6317G-2003 Steel Bars and Forgings 1.8Ni 0.25Mo (0.38-0.43C) (4640) Heat Treated, 125 ksi (862 MPa) Tensile Strength
  • SAE AMS6317F-1995 STEEL BARS AND FORGINGS 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640) Heat Treated, 125 ksi (862 MPa) Tensile Strength
  • SAE AMS6363-2002 Steel Tubing (Seamless), Round Chromium Molybdenum (0.27 - 0.33 Carbon) (180,000 Tensile Strength - 0.156 Maximum Wall Thickness)
  • SAE AMS6317L-2022 Steel Bars and Forgings 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640) Heat Treated, 125 ksi (862 MPa) Tensile Strength
  • SAE AS4470A-2001 Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, Straight to 45°

European Committee for Standardization (CEN), tensile strength

  • prEN 26922-1992 Adhesives; determination of tensile strength of butt joints (ISO 6922:1987)
  • EN ISO 21180:2013 Light conveyor belts - Determination of the maximum tensile strength
  • EN 26922:1993 Adhesives - Determination of Tensile Strength of Butt Joints (ISO 6922 : 1987)
  • EN 15870:2009 Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987 modified)
  • EN 13864:2004 Surfaces for sports areas - Determination of tensile strength of synthetic yarns
  • EN 1607:2013 Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces
  • EN ISO 3376:2020 Leather - Physical and mechanical tests - Determination of tensile strength and percentage elongation (ISO 3376:2020)
  • EN 1608:2013 Thermal insulating products for building applications - Determination of tensile strength parallel to faces
  • EN ISO 3376:2011 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2011)
  • EN ISO 3376:2002 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension ISO 3376:2002

IL-SII, tensile strength

  • S.I.455-1962 TESTING THE TENSILE STRENGTH OF FIBRES YARNS AND THREADS

Professional Standard - Aviation, tensile strength

  • HB 5475-1991 Test method for tensile strength of thermal sprayed coatings
  • HB 6853-1993 Bolts with a minimum tensile strength of 1470MPa use preloaded washers
  • HB 6852-1993 Bolts with a minimum tensile strength of 1075 MPa use preloaded washers

Aerospace Industries Association/ANSI Aerospace Standards, tensile strength

Professional Standard - Electron, tensile strength

  • SJ/T 3326-2016 Sealing tensile strength test method for ceramic-metal
  • SJ/T 3326-2001 Test method used in tensile strength of ceramic to metal seal
  • SJ 3226-1989 Test methods for ceramics-motal sealing strength against teusion

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, tensile strength

  • GB/T 34219-2017 Refractory matericals—Determination of tensile strength at room temperature
  • GB/T 34220-2017 Refractory Products—Determination of tensile strength at elevated temperature

CEN - European Committee for Standardization, tensile strength

  • EN ISO 21180:2006 Light conveyor belts - Determination of the maximum tensile strength
  • EN ISO 17706:2018 Footwear - Test methods for uppers - Tensile strength and elongation
  • EN 1608:1996 Thermal Insulating Products for Building Applications - Determination of Tensile Strength Parallel to Faces

PH-BPS, tensile strength

  • PTS 155-1972 Method of Test for Tensile Bneaking strength of Paper and Board

NO-SN, tensile strength

  • NS 3674-1987 Concrete testing - Hardened concrete - Tensile strength

Professional Standard - Coal, tensile strength

  • MT/T 47-1987 Method for determination of unidirectional tensile strength of coal and rock
  • MT 47-1987 Method for determination of unidirectional tensile strength of coal and rock

Professional Standard - Water Conservancy, tensile strength

Professional Standard - Forestry, tensile strength

  • LY/T 1410-1999 Laminated wood plastics.Compreg Determination of tension strength parallel to face grain

Professional Standard - Chemical Industry, tensile strength

  • HG/T 2642-2006 Test method for tensile strength of impermeable graphite materials
  • HG/T 2378-2007 Test method of the adhesion tensile strength of graphite adhesion agent
  • HG/T 2378-1992 Test method for bond tensile strength of graphite adhesive
  • HG/T 2642-1994 Test method for tensile strength of impermeable graphite materials

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., tensile strength

  • IEEE 84-1963 Test Procedure for DETERMINING TENSILE STRENGTH and HARDNESS OF LEAD SHEATHS

(U.S.) Ford Automotive Standards, tensile strength

Defense Logistics Agency, tensile strength

CZ-CSN, tensile strength

NL-NEN, tensile strength

  • NEN 2150-1986 Paper and board Determination of tensile strength after immersion in water
  • NEN-ISO 6922:1993 Adhesives. Determination of tensile strength of butt joints (ISO 6922:1987)
  • NEN 5969-1988 Concrete and mortar - Determination of the tensile splitting strength of testspecimens
  • NEN-EN 319-1993 Particleboards and fibreboards. Determination of tensile strength perpendicular to the plane of the board

ESDU - Engineering Sciences Data Unit, tensile strength

  • ESDU 88008-1988 Fatigue limit of unnotched steels (related to tensile strength).

Professional Standard - Machinery, tensile strength

  • JB/T 7424-2007 Coated abrasives.Determination of tensile strength and extensibility
  • JB/T 7424-1994 Method for determination of tensile strength and elongation of coated abrasives
  • JB/T 8133.9-1999 Test method for physical-chemical properties of electrical carbon product.Tensil strength
  • JB/T 9141.2-2013 Flexible graphite sheets.Part 2: Test method for tensile strength

Electronic Components, Assemblies and Materials Association, tensile strength

ECIA - Electronic Components Industry Association, tensile strength

  • EIA-364-08C-2015 TP-08C Crimp Tensile Strength Test Procedure for Electrical Connectors
  • RS-364-08A-1983 TP-08A Crimp Tensile Strength Test Procedure for Electrical Connectors

TIA - Telecommunications Industry Association, tensile strength

  • EIA-455-89A-1989 FOTP-89 Fiber Optic Cable Jacket Elongation and Tensile Strength

Anhui Provincial Standard of the People's Republic of China, tensile strength

  • DB34/T 2235-2014 Technical specification for testing the tensile strength of structural concrete by drilling and pulling method

BE-NBN, tensile strength

  • NBN EN 582-1994 Thermal spraying - Determination of tensile adhesive strength

IT-UNI, tensile strength

The American Road & Transportation Builders Association, tensile strength

US-FCR, tensile strength

AASHTO - American Association of State Highway and Transportation Officials, tensile strength

  • T 132-1987 Standard Method of Test for Tensile Strength of Hydraulic Cement Mortars
  • T 198-2009 Standard Method of Test for Splitting Tensile Strength of Cylindrical Concrete Specimens
  • T 198-2002 Standard Method of Test for Splitting Tensile Strength of Cylindrical Concrete Specimens
  • T 198-2015 Standard Method of Test for Splitting Tensile Strength of Cylindrical Concrete Specimens
  • TP10-1993 Standard Test Method for Thermal Stress Restrained Specimen Tensile Strength (2000 Edition)
  • M253-1994 Standard Specification for Heat-Treated Steel Structural Bolts@ 150 ksi Minimum Tensile Strength

SAE - SAE International, tensile strength

  • SAE AMS5693C-2001 Steel@ Corrosion Resistant@ Wire 18Cr - 9.0Ni Cryogenically Produced@ High Tensile Strength
  • SAE AS7475A-1997 Bolts@ Cobalt-Chromium-Nickel Alloy@ UNS R30159@ Tensile Strength 260 ksi@ Procurement Specification
  • SAE AS7477F-2016 Bolts and Screws@ Steel@ UNS S66286 Tensile Strength 130 ksi@ Procurement Specification
  • SAE AS7475C-2003 Bolts@ Cobalt-Chromium-Nickel Alloy@ UNS R30159@ Tensile Strength 260 ksi@ Procurement Specification
  • SAE AS4506B-2009 Bolts and Screws@ Steel@ UNS S66286 Tensile Strength 160 ksi@ Procurement Specification
  • SAE AS7475D-2010 Bolts@ Cobalt-Chromium-Nickel Alloy@ UNS R30159@ Tensile Strength 260 ksi@ Procurement Specification
  • SAE AS4506A-2000 Bolts and Screws@ Steel@ UNS S66286 Tensile Strength 160 ksi@ Procurement Specification
  • SAE AMS5316D-1992 Ductile (Nodular) Iron Castings@ Sand 80@000 psi (550 MPa) Tensile Strength As Cast (UNS F34100)
  • SAE AMS5518E-1978 Steel@ Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled@ 150@000 psi (1034 MPa) Tensile Strength (UNS S30100)
  • SAE AMS5693B-1994 Steel@ Corrosion Resistant@ Wire 18Cr - 9.0Ni Cryogenically Produced@ High Tensile Strength (UNS S30200)
  • SAE AMS6361A-1972 STEEL TUBING@ SEAMLESS 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 125@000 psi (862 MPa) Tensile Strength
  • SAE AMS6362A-1942 STEEL TUBING@ SEAMLESS 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 150@000 psi (1034 MPa) Tensile Strength
  • SAE AMS6362D-1990 Steel Tubing@ Seamless 0.95Cr - 0.20Mo (0.28- 0.33C) (SAE 4130) 150@000 psi (1034 MPa) Tensile Strength
  • SAE AMS5316E-2017 Ductile (Nodular) Iron Castings@ Sand 80@000 psi (550 MPa) Tensile Strength As Cast (UNS F34100)
  • SAE AMS03-4-2015 The Pre-Treatment and Protection of Steel Items of Specified Maximum Tensile Strength Exceeding 1450 MPa
  • SAE AMS03-4A-2017 The Pre-Treatment and Protection of Steel Items of Specified Maximum Tensile Strength Exceeding 1450 MPa
  • SAE AMS6361G-2018 Steel Tubing@ Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 125 ksi (862 MPa) Tensile Strength (UNS G41300)
  • SAE AMS6362H-2018 Steel Tubing@ Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 150 ksi (1034 MPa) Tensile Strength (UNS G41300)
  • SAE J2833-2018 Welded and Cold-Drawn, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending and Flaring
  • SAE AS7477C-1998 Bolts and Screws@ Steel@ UNS S66286 Tensile Strength 130 ksi@ Procurement Specification (FSC 5306)
  • SAE AS7468A-1997 Bolts@ Cobalt-Chromium-Nickel Alloy UNS R30035@ Tensile Strength 260 ksi@ Procurement Specification (FSC 5306)
  • SAE AS7475B-2000 Bolts@ Cobalt-Chromium-Nickel Alloy @ UNS R30159@ Tensile Strength 260 ksi@ Procurement Specification (FSC 5306)
  • SAE AMS6317F-1991 Steel Bars and Forgings 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640) Heat Treated@ 125 ksi (862 MPa) Tensile Strength
  • SAE AMS6362C-1985 STEEL TUBING@ SEAMLESS 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 150@000 psi (1035 MPa) Tensile Strength (UNS G41300)
  • SAE AMS6361C-1990 Steel Tubing@ Seamless Round 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 125@000 psi (862 MPa) Tensile Strength
  • SAE AMS6362B-1979 STEEL TUBING@ SEAMLESS 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 150@000 psi (1034 MPa) Tensile Strength (UNS G41300)
  • SAE AMS6374A-1990 Steel Tubing@ Seam-Free@ Round 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 95@000 psi (655 MPa) Tensile Strength
  • SAE AMS5315E-2017 Ductile (Nodular) Iron Castings@ Sand 60000 psi (415 MPa) Tensile Strength Ferritize Annealed (UNS F33101)

Institute of Electrical and Electronics Engineers (IEEE), tensile strength

  • IEEE Std 84-1963 IEEE Test Procedure for Determining Tensile Strength and Hardness of Lead Sheaths

Lithuanian Standards Office , tensile strength

  • LST 1551.1-1999/1K-2002 Concrete articles for tiding surroudings. Testing methods. Determination of compressive and tensile strength
  • LST 1551.1-1999 Concrete articles for tiding surroudings. Testing methods. Determination of compressive and tensile strength
  • LST EN 1608+AC-2000 Thermal insulating products for building applications - Determination of tensile strength parallel to faces
  • LST EN 15870-2009 Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987 modified)
  • LST EN 1607+AC-1999 Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces
  • LST EN 319-1999 Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board

ISUZU - Isuzu Motors Ltd., tensile strength

  • ISC-F12-012-1982 Method of Measuring Tensile Strength of Brake Drums (Japanese/English Version)

PL-PKN, tensile strength

AENOR, tensile strength

  • UNE-EN 1608:2013 Thermal insulating products for building applications - Determination of tensile strength parallel to faces
  • UNE-EN 1607:2013 Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces
  • UNE-EN 15870:2009 Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987 modified)
  • UNE-EN 319:1994 PARTICLEBOARDS AND FIBREBOARDS. DETERMINATION OF TENSILE STRENGTH PERPENDICULAR TO THE PLANE OF THE BOARD.

未注明发布机构, tensile strength

  • SAE AS7477J-2023 Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specification

Group Standards of the People's Republic of China, tensile strength

  • T/CIET 208-2023 High tensile strength ultra-thin copper foil for new energy vehicle power batteries
  • T/ZS 0336-2022 Technical specification for testing tensile strength of steel construction in site by Leeb-hardness method

International Electrotechnical Commission (IEC), tensile strength

  • IEC 60793-1-31:2001 Optical fibres - Part 1-31: Measurement methods and test procedures; Tensile strength
  • IEC 60793-1-31:2010 Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength

CENELEC - European Committee for Electrotechnical Standardization, tensile strength

AIA/NAS - Aerospace Industries Association of America Inc., tensile strength

  • NASM1312-23-1997 Fastener Test Methods; Method 23 Tensile Strength of Panel Fasteners
  • NAS495-2002 Bolt-Internal Wrenching-Steel (High Tensile and High Fatigue Strength) (Rev 3)

Standard Association of Australia （SAA）, tensile strength

  • AS/NZS 1301.437s:2007 Methods of test for pulp and paper - Tensile strength of wetted paper and paperboard

Shandong Provincial Standard of the People's Republic of China, tensile strength

  • DB37/T 5046-2015 Technical specification for on-site testing of tensile strength of building steel by Leeb hardness method

American Society of Mechanical Engineers (ASME), tensile strength

Aerospace Industries Association, tensile strength

  • AIA NAS 495-2002 Bolt-Internal Wrenching-Steel (High Tensile and High Fatigue Strength) FSC 5306; Rev 3

European Committee for Electrotechnical Standardization（CENELEC）, tensile strength

  • EN 60793-1-31:2010 Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength

  Tensile strength psi, tensile strength, Graphite tensile strength, Tensile strength machine, Tensile strength psi, Stone tensile strength, clay tensile strength, Screw tensile strength, Brass Tensile Strength, Tensile strength test, Graphite tensile strength, Tensile strength meter, Tensile strength test, Tensile strength+psi, Tensile strength test, Tensile strength test, Nominal Tensile Strength, Tensile strength astm, Tensile strength astm, astm tensile strength.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved