ZH
RU
ES

Detect metal spectrometer

Detect metal spectrometer, Total:495 items.

In the international standard classification, Detect metal spectrometer involves: Water quality, Geology. Meteorology. Hydrology, Non-destructive testing, Surface treatment and coating, Jewellery, Farming and forestry, Measurement of volume, mass, density, viscosity, Construction of waterways and ports, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Mechanical testing, Wastes, Protection against crime, Optics and optical measurements, Analytical chemistry, Dentistry, Quality, Ferrous metals, Metrology and measurement in general, Testing of metals, Non-ferrous metals, Linear and angular measurements, Rubber, Semiconducting materials, Lamps and related equipment, Medical equipment, Equipment for the chemical industry, Welding, brazing and soldering, Inorganic chemicals, Iron and steel products, Measurement of force, weight and pressure, Products of the textile industry, Environmental protection, Insulating materials, Ferroalloys, Products of the chemical industry, Fuels, Air quality, Raw materials for rubber and plastics, Powder metallurgy, Nuclear energy engineering, Soil quality. Pedology, Sugar. Sugar products. Starch, Lubricants, industrial oils and related products, Insulating fluids, Photography, Paints and varnishes, Conducting materials, Radiation protection, Fibre optic communications, Metalliferous minerals, Organic chemicals, Rubber and plastics products, Physics. Chemistry, Materials for the reinforcement of composites, Leather technology, Footwear, Vocabularies.

Professional Standard - Aviation, Detect metal spectrometer

HB 20094.3-2012 Test method for determination of wear metals in operating liquid for aviation.Part 3: Energy dispersion X-ray fluorescence spectrometry
HB 20094.1-2012 Test method for determination of wear metals in operating liquid for aviation.Part 1: Rotating disc electrode atomic emission spectrometry
HB 20094.2-2012 Test method for determination of wear metals in operating liquid for aviation.Part 2: Inductively coupled plasma automic emission spectrometry (ICP-AES)
HB 5416-1988 Infrared Spectral Inspection Method for Aeronautical Non-metallic Materials
HB 20094.4-2012 Test method for determination of wear metals in operating liquid for aviation.Part 4: Scanning electron microscopy and energy dispersive spectrometry

National Metrological Verification Regulations of the People's Republic of China, Detect metal spectrometer

JJG 867-1994 Verification Regulation of Spectrocolorimeter
JJG(交通) 027-2015 Water Transport Engineering.Nonmetal Ultrasonic Detector
JJG(交通) 027-2004 Water Transport Engineering-Nonmetal Ultrasonic Detector
JJG 027-2015 Non-metallic acoustic wave detector for water transport engineering

Indonesia Standards, Detect metal spectrometer

SNI 06-6596-2001 Water treatment for metal analysis by atomic absorption spectrophotometers
SNI 18-6931-2002 Non-destructive testing radiograpic examination of metallic materials by X-rays and Y-rays - Basic rules
SNI ISO 6101-4:2016 Karet – Penentuan kadar logam dengan spektrometri serapan atom – Bagian 4: Penentuan kadar mangan
SNI 06-6989.56-2005 Water and waste water - Part 56: Test methods of calcium (Ca) content by atomic absorption spectrophotometers
SNI 06-6989.55-2005 Water and waste water - Part 55: Test methods of magnesium (Mg) content by atomic absorption spectrophotometers (AAS)
SNI 06-6989.37-2005 Water and waste water - Part 37: Test methods of cadmium (Cd) content with atomic absorption spectrophotometers (AAS) by extraction
SNI 06-6989.49-2005 Water and waste water - Part 49: Test methods of iron (Fe) content with atomic absorption spectrophotometers (AAS) by extraction
SNI 06-6989.47-2005 Water and wastewater - Part 47: Test methods of nickel (Ni) content with atomic absorption spectrophotometers (AAS) by extraction
SNI 06-6989.52-2005 Water and waste water - Part 52: Test methods of nitrogen organic content by macro Kjeldahl and titration
SNI 06-6989.38-2005 Water and waste water - Part 38: Test methods of cadmium (Cd) content with atomic absorption spectrophotometers (AAS) by carbon stoves
SNI 06-6989.48-2005 Water and waste water - Part 48: Test methods of nickel (Ni) content with atomic absorption spectrophotometers (AAS) by carbon stoves
SNI 06-6989.50-2005 Water and waste water - Part 50: Test methods of iron (Fe) content by atomic absorption spectrophotometers (AAS) with carbon stoves
SNI 06-6989.40-2005 Water and waste water - Part 40: Test methods of barium (Ba) content with atomic absorption spectrophotometers (AAS) by carbon stoves

Professional Standard - Ocean, Detect metal spectrometer

HY/T 125-2009 Test method of ocean color spectrograph

Professional Standard - Machinery, Detect metal spectrometer

JB/T 11605-2013 Non-destructive testing instruments.Metal magnetic memory instrument specification
JB/T 11606-2013 Non-destructive testing instruments.Metal magnetic memory instrument verification

Korean Agency for Technology and Standards (KATS), Detect metal spectrometer

KS D ISO 3497-2002(2017) Metallic coatings－Measurement of coating thickness－X-ray spectrometric methods
KS D ISO 3497-2002(2022) Metallic coatings－Measurement of coating thickness－X-ray spectrometric methods
KS D ISO 3497:2002 Metallic coatings－Measurement of coating thickness－X-ray spectrometric methods
KS D 1680-2008 General rules for photographic emission spectrochemical analysis of metal materials
KS D ISO 4519:2009 Electrodeposited metallic coatings and related finishes－Sampling procedures for inspection by attributes
KS M 6584-2008 Standard test method for rubber－Determination of metal content by Flame Atomic Absorption(AAS) analysis
KS M ISO 6101-5:2019 Rubber — Determination of metal content by atomic absorption spectrometry — Part 5: Determination of iron content
KS M ISO 6101-5:2009 Rubber-Determination of metal content by atomic absorption spectrometry-Part 5:Determination of iron content
KS M ISO 6101-2:2007 Rubber－Determination of metal content by atomic absorption spectrometry－Part 2：Determination of lead content
KS M ISO 6101-2-2007(2022) Rubber－Determination of metal content by atomic absorption spectrometry－Part 2：Determination of lead content
KS M ISO 6101-2-2007(2017) Rubber－Determination of metal content by atomic absorption spectrometry－Part 2：Determination of lead content
KS I ISO 15202-1:2006 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry-Part 1:Sampling
KS I ISO 15202-1:2014 Workplace air — Determination of metals and metalloids in Workplace air — Determination of metals and metalloids in emission spectrometry — Part 1: Sampling
KS H ISO 11212-1-2008(2018) Starch and derived products－Heavy metals content－Part 1：Determination of arsenic content by atomic absorption spectrometry
KS I 30011-2012 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
KS M ISO 3856-4:2022 Paints and varnishes — Determination of “soluble” metal content — Part 4: Determination of cadmium content — Flame atomic absorption spectrometric method and polarographic method
KS H ISO 11212-2-2008(2018) Starch and derived products－Heavy metals content－Part 2：Determination of mercury content by atomic absorption spectrometry
KS M ISO 3856-4:2007 Paints and varnishes－Determination of “soluble” metal content－Part 4：Determination of cadmium content－Flame atomic absorption spectrometric method and polarographic method
KS C IEC 62484:2014 Radiation protection instrumentation — Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material
KS M ISO 3856-4-2007(2017) Paints and varnishes－Determination of “soluble” metal content－Part 4：Determination of cadmium content－Flame atomic absorption spectrometric method and polarographic method
KS I ISO 15202-3:2005 Workplace air ― Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry ― Part 3: Analysis
KS D ISO 3868:2002 Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
KS M ISO 3856-1:2022 Paints and varnishes — Determination of “soluble” metal content — Part 1: Determination of lead content — Flame atomic absorption spectrometric method and dithizone spectrophotometric method
KS H ISO 11212-2:2008 Starch and derived products－Heavy metals content－Part 2：Determination of mercury content by atomic absorption spectrometry
KS H ISO 11212-1:2008 Starch and derived products－Heavy metals content－Part 1：Determination of arsenic content by atomic absorption spectrometry
KS I ISO 15202-3:2021 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 3: Analysis
KS C IEC 62484-2014(2019) Radiation protection instrumentation — Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material
KS M ISO 3856-2:2007 Paints and varnishes－Determination of “soluble” metal content－Part 2：Determination of antimony content－Flame atomic absorption spectrometric method and Rhodamine B spectrophotometric method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Detect metal spectrometer

GB/T 18043-2000 Precious metal jewellery content non-damaged test method X-ray fluorescence spectrometry
GB/T 18043-2008 Jewellery.Determination of precious metal content.Method using X.Ray fluorescence spectrometry
GB/T 18043-2013 Jewellery.Determination of precious metal content.Method using X-Ray fluorescence spectrometry
GB/T 16921-1997 Measurement of metallic coating thickness X-ray spectrometric methods
GB/T 41945-2022 Rubber, raw, vulcanised—Determination of metal content by ICP-OES
GB/T 24578-2015 Test method for measuring surface metal contamination on silicon wafers by total reflection X-Ray fluorescence spectroscopy
GB/T 24578-2009 Test method for measuring surface metal contamination on silicon wafers by total reflection X-ray fluorescence spectroscopy
GB/T 21198.4-2007 Determination of precious metals in precious metals jewellery alloys.Method using ICP spectrometry.Part 4: 999‰ precious metals jewellery alloys.Determination of precious metals.Difference method
GB/T 21198.6-2007 Determination of precious metals in precious metals jewellery alloys-Method using ICP spectrometry-Part 6:Difference method
GB/T 26836-2011 Non-destructive testing instruments.Specification for metal ceramic X-ray tube
GB/T 16921-2005 Metallic coatings.Measurement of coating thickness.X-ray spectrometric methods
GB/T 17593-1998 Textiles--Test method of heavy metal ions--Atomic absorption spectrophotometry
GB/T 24582-2009 Test method for measuring surface metal contamination of polycrystalline silicon by acid extraction-inductively coupled plasma mass spectrometry
GB/T 21198.5-2007 Determination of precious metals in precious metals jewellery alloys.Method using ICP spectrometry.Part 5: 999‰silver jewellery alloys.Determination of silver.Difference method
GB/T 21198.1-2007 Determination of precious metals in precious metals jewellery alloys- Method using ICP spectrometry- Part 1: Platinum jewellery alloys- Determination of platinum-Method using a solution with yttrium as internal standard element
GB/T 21198.3-2007 Determination of precious metals in precious metals jewellery alloys.Method using ICP spectrometry.Part 3: Palladium jewellery alloys.Determination of palladium.Method using a solution with yttrium as internal standard element
GB/T 24579-2009 Test methods for measuring surface metal contamination of polycrystalline silicon by acid extraction-atomic absorption spectroscopy
GB/T 10726-1989 Chemical reagent--General method for the determination of metals by solvent extraction followed by AAS
GB/T 10726-2007 Chemical reagent.General method for the determination of metals by solvent extraction followed by AAS
GB/T 17418.6-1998 Methods for analysis of noble metals in geochemical samples--Determination of platinum, palladium and gold content-Preconcentration by fire assay-Emission spectrographic method
GB/T 15917.2-1995 Dysprosium and dysprosium oxide--Determination of copper, molybdenum, nickel and titanium contents--Inductively coupled plasma atomic emission spectrographic method
GB/T 15072.11-2008 Test method of precious metal alloys.Determination of gadolinium and beryllium contents for gold alloys.Inductively coupled plasma atomic emission spectrometry
GB/T 15072.16-2008 Test method of precious metal alloys.Determination of copper and manganese contents for gold alloys.Inductively coupled plasma atomic emission spectrometry
GB/T 15072.18-2008 Test method of precious metal alloys.Determination of zirconium and gadolinium contents for gold alloys.Inductively coupled plasma atomic emission spectrometry
GB/T 15072.7-2008 Test methods of precious metal alloys.Determination of chromium and iron contents for gold alloys.Inductively coupled plasma atomic emission spectrometry
GB/T 20380.1-2006 Starch and derived products.Heavy metals content.Part 1:Determination of arsenic content by atomic absorption spectrometry
GB/T 20380.2-2006 Starch and derived products.Heavy metals content .Part 2: Determination of mercury content by atomic absorption spectrometry
GB/T 21198.2-2007 Determination of precious metals in precious metals j ewellery alloys.Method using ICP spectrometry.Part 2：Platinum jewellery alloys--Determination of platinum.Method using the intensity ratios of all minor constituents with reference to platinum
GB 9758.4-1988 Paints and varnishes - Determination of "soluble" metal content - Part 4: Determination of cadmium content by flame atomic absorption spectrometry and polarography
GB/T 9758.4-1988 Paints and varnishes--Determination of "soluble" metal content--Part 4:Determination of cadmium content--Flame atomic absorption spectrometric method and polarographic method
GB/T 17593.2-2007 Textiles.Determination of heavy metals.Part 2: Inductively coupled plasma atomic emission spectrometry
GB/T 12690.16-1990 Rare-earth metals and their oxides--Determination of calcium content--Flame atomic absorption spectrometric method
GB/T 15072.14-2008 Test method of precious metal alloys.Determination of aluminium and nickel contents for silver alloys.Inductively coupled plasma atomic emission spectrometry
GB/T 15072.19-2008 Test method of precious metal alloys.Determination of vanadium and magnesium contents for silver alloys.Inductively coupled plasma atomic emission spectrometry
GB 9758.1-1988 Paints and varnishes - Determination of "soluble" metal content - Part 1: Determination of lead content by flame atomic absorption spectrometry and dithizone spectrophotometry
GB/T 9758.1-1988 Paints and varnishes--Determination of "soluble" metal content--Part 1:Determination of lead content--Flame atomic absorption spectrometric method and dithizone spectrophotometric method
GB/T 15072.15-2008 Test method of precious metal alloys.Determination of nickel,zinc and manganese contents for gold,silver and palladium alloys.Inductively coupled plasma atomic emission spectrometry
GB/T 32433-2015 Footwear.Chemical test method.Heavy metal content.Microwave plasma atomic emission spectroscopy
GB/T 37211.3-2022 Method for chemical analysis of metal germanium—Part 3: Determination of trace impurity elements content—Glow discharge mass spectrometry
GB/T 20380.3-2006 Starch and derived products.Heavy metals content .Part 3: Determination of lead content by atomic absorption spectrometry with electrothermal atomization
GB/T 20380.4-2006 Starch and derived products.Heavy metals content .Part 4: Determination of cadmium content by atomic absorption spectrometry with electrothermal atomization
GB/T 15072.13-2008 Test method of precious metal alloys.Determination of tin,cerium and lanthanium contents for silver alloys.Inductively coupled clasma atomic emission spectrometry
GB/T 17418.6-2010 Methods for analysis of noble metals in geochemical samples.Part 6:Determination of platinum,palladium and gold content.Preconcentration by fire assay-emission spectrometry
GB/T 12690.7-1990 Neodymium and neodymium oxide--Determination of lanthanum oxide, cerium oxide, praseodymium oxide, samarium oxide, yttrium oxide contents--X-ray fluorescence spectrometric method

Group Standards of the People's Republic of China, Detect metal spectrometer

T/YNBX 081-2023 Rapid determination of heavy metals in soil from agricultural production areas by x-ray fluorescence spectrometry
T/CSTM 00761-2021 Nickel—Determination of selenium and tellurium contents —Hydride generation- atomic fluorescence spectrometric method
T/CSTM 00760-2021 Nickel—Determination of arsenic, antimony and bismuth contents —Hydride generation- atomic fluorescence spectrometric method
T/HEEPA 7-2023 Technical specifications for on-site monitoring of soil heavy metal elements by laser-induced breakdown spectroscopy
T/GAMA 18-2021 Laser Ultrasonic Method for Online Inspection of Metal Additively Manufactured Components
T/QAS 081.5-2023 Chemical analysis of polymetallic minerals - Part 5: Determination of gold by foam adsorption - atomic absorption spectrometry
T/QAS 081.4-2023 Chemical analysis of polymetallic minerals - Part 4: Determination of tin by hydride generation - atomic fluorescence spectrometry
T/SDAQI 015-2021 Textiles—Determination of heavy metal migration in accessories(Inductively coupled plasma optic emission spectrometry)
T/GAMA 22-2021 Additive manufacturing Non-destructive testing of surface defects of metal components Laser thermography method
T/CGIA 012-2019 Determination of metallic elements in graphene materials — Inductively coupled plasma emission spectrometry

American Society for Testing and Materials (ASTM), Detect metal spectrometer

ASTM E2001-98 Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-Metallic Parts
ASTM E2001-18 Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts
ASTM E1217-11 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
ASTM E1217-00 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
ASTM E1217-05 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
ASTM B890-07(2012) Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
ASTM B890-07 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
ASTM E2001-13 Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts
ASTM E2626-08 Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals
ASTM E2626-08e1 Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals
ASTM E1447-22 Standard Test Method for Determination of Hydrogen in Reactive Metals and Reactive Metal Alloys by Inert Gas Fusion with Detection by Thermal Conductivity or Infrared Spectrometry
ASTM F601-98 Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants
ASTM F2401-16 Standard Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices
ASTM E1085-95(2004) Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels
ASTM E1085-95(2000) Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels
ASTM E1085-95(2004)e1 Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels
ASTM F1710-97 Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
ASTM F1710-97(2002) Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
ASTM UOP407-09 Trace Metals in Organics by Dry Ashing - ICP-OES
ASTM B890-20 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
ASTM B890-02 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
ASTM B890-98 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
ASTM F2405-04(2011) Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
ASTM F2405-04 Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
ASTM F1593-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
ASTM F1710-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
ASTM C1517-16 Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy
ASTM F1375-92(1999) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM F1375-92(2020) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM C1517-02 Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy
ASTM C1517-09 Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy
ASTM E1217-11(2019) Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
ASTM UOP391-09 Trace Metals in Petroleum Products or Organics by AAS
ASTM D6376-09 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy
ASTM D6376-10(2017)e1 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-ray Fluorescence Spectroscopy
ASTM F601-03 Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants
ASTM F601-03(2008) Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants
ASTM E826-85(1996)e1 Standard Practice for Testing Homogeneity of Materials for Development of Reference Materials
ASTM E826-14 Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry
ASTM E826-08(2013) Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry
ASTM D3605-00(2011) Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
ASTM F1845-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Resolution Glow Discharge Mass Spectrometer
ASTM F1375-92(2012) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM E1552-93(1998) Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys Using the D-C Argon Plasma Spectrometer
ASTM E2985/E2985M-14(2019) Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy
ASTM E2985/E2985M-14 Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy
ASTM F1845-97 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Reduction Glow Discharge Mass Spectrometer
ASTM F1845-97(2002) Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Reduction Glow Discharge Mass Spectrometer
ASTM F1845-08 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Resolution Glow Discharge Mass Spectrometer
ASTM E826-08 Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry
ASTM D6376-05 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy
ASTM D6376-06 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy
ASTM D6376-99 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy
ASTM D7303-06 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D7303-12 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D6376-10 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy
ASTM D7035-16 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D7035-04 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D7035-21 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D7035-10 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D8207-18 Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PAT) by Atomic Absorption (AA) Spectrometry
ASTM D4185-06 Standard Practice for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry

Professional Standard - Traffic, Detect metal spectrometer

JT/T 576-2015 Water transport engineering.Nonmetal ultrasonic detector
JT/T 576-2004 Water transport engineering.Nonmetal ultrasonic detector

Jilin Provincial Standard of the People's Republic of China, Detect metal spectrometer

DB22/T 1930-2013 Metal Rockwell Hardness Tester Depth Sounding Device Detector

工业和信息化部, Detect metal spectrometer

HG/T 6114-2022 Rapid detection method for heavy metals in waste acid: energy-dispersive X-ray fluorescence spectrometry
YB/T 4143-2019 Inspection method for uniformity determination of solid metals using spark source atomic emission spectrometry
JB/T 13767-2020 Non-destructive testing of welds Ultrasonic testing of laser welded lap joints of metal sheets
YB/T 6028-2022 Determination of ferromanganese, manganese-silicon alloy, metallic manganese and magnesium content by flame atomic absorption spectrometry
YB/T 6027-2022 Determination of ferromanganese, manganese-silicon alloy, metallic manganese-calcium content by flame atomic absorption spectrometry
HG/T 5763-2020 Determination of metal elements in metallocene polyolefin catalysts by inductively coupled plasma optical emission spectrometry
YB/T 4907-2021 Determination of ferromanganese, manganese-silicon alloys and metal manganese manganese, silicon, iron and phosphorus contents by wavelength dispersive X-ray fluorescence spectrometry
YB/T 4936-2021 Determination of ferromanganese, manganese-silicon alloy, and metallic manganese-copper content by dicyclohexanone oxalyl dihydrazone spectrophotometry and flame atomic absorption spectrometry
SJ/T 11554-2015 Determination of metal element content in hydrofluoric acid using inductively coupled plasma optical emission spectrometry
XB/T 628-2020 Chemical Analysis Methods for High Purity Rare Earth Metals Determination of Trace Element Content Glow Discharge Mass Spectrometry

Professional Standard - Public Safety Standards, Detect metal spectrometer

GA/T 1995-2022 Forensic Science Metal Examination Wavelength Dispersive X-ray Fluorescence Spectrometry

SE-SIS, Detect metal spectrometer

SIS SS IEC 250:1982 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
SIS SS IEC 248:1988 Nuclear instrumen ta tion — Dimensions of planchets usedin nuclear electronic instruments
SIS SS-EN 10 184-1990 Chemical analysis of ferrous materials — Determination of phosfor in steels and irons — Spectrophotometric method
SIS SS-EN 24 943-1991 Chemical analysis of ferrous metal — Deter- mination of copper content — Flame atomic absorption spectrometric method
SIS SS 02 81 87-1986 Metal content of biological material determined by atomic absorption spectrometry — Digestion
SIS SS-EN 10 181-1989 Chemical analysis of ferrous materials — Determination of lead in steels — Flame atomic absorption spectrometric method
SIS SS-EN 10 188-1990 Chemical analysis of ferrous materials — Determination of chromium in steels and irons — Flame atomic absorption spectro- metric method
SIS SS-EN 10 177-1989 Chemical analysis of ferrous materials — Determination of calcium in steels — Flame atomic absorption spectrometric method
SIS SS-EN 10 136-1989 Chemical analysis of ferrous materials — Determination of nickel in steels and irons — Flame atomic absorption spectrometric method
SIS SS 02 81 75-1989 Metal content of water, sludge and sediment determined by flameless atom/c absorption spectrometry — Special guidelines for mercury

Fujian Provincial Standard of the People's Republic of China, Detect metal spectrometer

JJF（闽）1085-2018 Calibration Specification for Portable Raman spectrum fast detection instruments
DB35/T 1564-2016 Technical Requirements for Portable Rapid Raman Spectroscopy Detector

Professional Standard - Medicine, Detect metal spectrometer

YY/T 1807-2022 Rapid non-destructive testing of main components in metal materials for dental restorations Hand-held X-ray fluorescence spectrometer method (semi-quantitative method)

Shanxi Provincial Standard of the People's Republic of China, Detect metal spectrometer

DB1404/T 18-2021 Inspection and testing laboratory instrument analysis method validation requirements Spectroscopy

National Metrological Technical Specifications of the People's Republic of China, Detect metal spectrometer

JJF 1953-2021 Calibration Specification for Gas Chromatographs with Sulfur Chemiluminescence Detector
JJF 2037-2023

RU-GOST R, Detect metal spectrometer

GOST 8.398-1980 State system for ensuring the uniformity of measurements. Hardness testing machines for metals and alloys. Methods and means of verification
GOST 8.044-1980 State system for ensuring the uniformity of measurements. Diamond indentors of the hardness testing machines for metal and alloys. Verification methods and means
GOST R 50233.5-1992 Niobium pentoxide. Chemical-atomic-emission method for determination of impurity metals
GOST 24507-1980 Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection
GOST 25278.12-1982 Alloys and foundry alloys of rare metals. Spectral method for determination of silicon, iron, aluminium, manganese and chromium in alloys on vanadium base
GOST 25278.17-1987 Alloys and foundry alloys of rare metals. Spectral (with induction hign-frequency plasma) method for determination of elements and impurities in alloys on the base of niobium
GOST 25278.11-1982 Alloys and foundry alloys of rare metals. Spectral method for determination of silicon, iron, aluminium, titanium, calcium in alloys on niobium base
GOST 23862.1-1979 Rare-earth metals and their oxides. Spectral method of determination of impurities in oxides of rare-earth elements
GOST 23862.2-1979 Rare-earth metals and their oxides. Direct spectral method of determination of impurities in oxides of rare-earth elements
GOST 23862.4-1979 Rare-earth metals and their oxides. Spectral method of determination of vanadium, iron, cobalt, silicon, manganese, copper, nickel, lead, titanium, chromium
GOST 23862.11-1979 Rare-earth metals and their oxides. Chemical-spectral method of determination of impurities of vanadium, iron, cobalt, manganese, copper, nickel
GOST R 50279.3-1992 Paints and varnishes. Test methods of metal content. Determination of "soluble" lead content. Flame atomic absorption spectrometric method and dithizone spectrophotometric method
GOST R 50279.4-1992 Paints and varnishes. Test methods of metal content. Determination of "soluble" antimony content. Flame atomic absorption spectrometric method and rhodamine B spectrophotometric method
GOST R 50279.6-1992 Paints and varnishes. Test methods of metal content. Determination of "soluble" cadmium. Flame atomic absorption spectrometric method and polarographic method
GOST R 50279.10-1992 Paints and varnishes. Test methods of metal content. Determination of total lead. Flame atomic absorption spectrometric method
GOST R 50279.11-1992 Paints and varnishes. Test methods of metal content. Determination of total mercury. Flameless atomic absorption spectrometric method
GOST 23862.7-1979 Rare-earth metals and their oxides. Chemical-spectral methods of determination of impurities in oxides of rare-earth elements
GOST R 50279.5-1992 Paints and varnishes. Test methods of metal content. Determination of "soluble" barium content. Flame atomic emission spectrometric method
GOST R 54420-2011 Ophthalmic optics. Metal and combination spectacle frames. Method for the simulation of wear and detection of nickel release

Professional Standard - Building Materials, Detect metal spectrometer

JC/T 2147-2012 Determination of trace metal elements in high purity alumina by inductively coupled plasma atomic emission spectrometry

机械电子工业部, Detect metal spectrometer

JB/T 5068-1991 Metal coating thickness measurement X-ray spectroscopy

Professional Standard - Light Industry, Detect metal spectrometer

QB/T 1912-1993 Test method for metal coating thickness of spectacle frames X-ray fluorescence spectrometry
QB/T 4337-2012 Shoe polish.Chemical test method.Heavy metal content.Inductively coupled plasma emission spectroscopy

Association Francaise de Normalisation, Detect metal spectrometer

NF A07-001:1970 Metal products. General data on emission spectrometry.
NF A91-116:1976 METALLIC COATINGS. THICKNESS MEASUREMENT BY X-RAY SPECTROMETRY.
NF A91-114:1995 Metallic coatings. Measurement of coating thickness. Profilometric method.
NF A91-116*NF EN ISO 3497:2001 Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods.
NF A09-320:1984 NON DESTRUCTIVE TESTING. MANUAL ULTRASONIC INSPECTION OF METALLIC PRODUCTS. SIMPLE IN-SERVICE CHECKING OF APPARATUS CHARACTERISTICS.
NF EN ISO 3497:2001 Revêtements métalliques - Mesurage de l'épaisseur du revêtement - Méthodes par spectrométrie de rayons X
NF ISO 6101-3:2022 Caoutchouc - Détermination de la teneur en métal par spectrométrie d'absorption atomique - Partie 3 : dosage du cuivre
NF ISO 6101-4:2022 Caoutchouc - Détermination de la teneur en métal par spectrométrie d'absorption atomique - Partie 4 : dosage du manganèse
NF EN ISO 11876:2010 Métaux-durs - Dosage du calcium, du cuivre, du fer, du potassium, du magnésium, du manganèse, du sodium, du nickel et du zinc dans les poudres métalliques de cobalt - Méthode par spectrométrie d'absorption atomique dans la flamme
NF EN IEC 62484:2021 Instrumentation pour la radioprotection - Portiques spectrométriques de détection des rayonnements (SRPMs) utilisés pour la détection et l'identification du trafic illicite des matières radioactives
NF EN 13068-3:2002 Essais non destructifs - Contrôle par radioscopie - Partie 3 : principes généraux de contrôle par radioscopie à l'aide de rayons X et gamma des matériaux métalliques
NF T43-107-4*NF ISO 6101-4:2022 Rubber - Determination of metal content by atomic absorption spectrometry - Part 4 : determination of manganese content
NF A06-902*NF EN 12938:2000 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry.
NF T43-107-3:2014 Rubber - Determination of metal content by atomic absorption spectrometry - Part 3 : determination of copper content
NF T43-107-4:2014 Rubber - Determination of metal content by atomic absorption spectrometry - Part 4 : determination of manganese content
NF T43-108:1992 Rubber. Determination of metal content by atomic absorption spectrometry. Part 3 : determination of copper content.
NF T43-107:1992 Rubber. Determination of metal content by atomic absorption spectrometry. Part 4 : determination of manganese content.
NF T43-107-3*NF ISO 6101-3:2022 Rubber - Determination of metal content by atomic absorption spectrometry - Part 3 : determination of copper content
NF A08-313:1995 Chemical analysis of ferrous materials. Determination of titanium in steel and iron. Flame atomic absorption spectrometric method.
NF C93-903-25:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-25 : examinations and measurements. Concentricity of the ferrules and ferrules with fibre installed.
NF A08-318:1989 Chemical analysis of ferrous materials. Determination of lead in steels. Flame atomic absorption spectrometric method.
NF EN 62618:2017 Instrumentation pour la radioprotection - Détecteurs individuels spectroscopiques d'alarme aux rayonnements (SPRD) pour la détection du trafic illicite des matières radioactives
NF A08-361:1989 Chemical analysis of ferrous materials. Determination of calcium in steels. Flame atomic absorption spectrometric method.
NF A91-117*NF EN ISO 3868:1995 Metallic and other non-organic coatings. Measurement of coating thicknesses. Fizeau multiple-beam interferometry method.
NF C19-484*NF EN IEC 62484:2021 Radiation protection instrumentation - Spectrometric radiation portal monitors (SRPMs) used for the detection and identification of illicit trafficking of radioactive material
NF A08-328*NF EN 10188:1989 Chemical analysis of ferrous materials. Determination of chromium in steels and irons. Flame atomic absorption spectrometric method.
FD A06-326*FD CEN/TR 10354:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al in ferro-silicon by X-ray fluorescence spectrometry
NF C19-484*NF EN 62484:2016 Radiation protection instrumentation - Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material
NF C93-805-5-3*NF EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Part 5-3 : test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser.
NF X43-265-3*NF ISO 15202-3:2005 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 3 : analysis
NF A08-307:1989 Chemical analysis of ferrous materials. Determination of nickel in steels and irons. Flame atomic absorption spectrometric method.
NF EN 10211:2014 Analyse chimique des produits ferreux - Détermination du titane dans les aciers et les fontes - Méthode par spectrométrie d'absorption atomique dans la flamme
NF T30-216:1981 Paints and varnishes. Determination of "soluble" metal content. Determination of soluble cadmium content. Flame atomic absorption spectroscopic and polarographic methods.
NF EN ISO 11212-2:1997 Amidons, fécules et produits dérives - Teneur en métaux lourds - Partie 2 : détermination de la teneur en mercure par spectrométrie d'absorption atomique.
NF EN ISO 11212-1:1997 Amidons, fécules et produits dérives - Teneur en métaux lourds - Partie 1 : détermination de la teneur en arsenic par spectrométrie d'absorption atomique.
NF ISO 15202-3:2005 Air des lieux de travail - Détermination des métaux et métalloïdes dans les particules en suspension dans l'air par spectrométrie d'émission atomique avec plasma à couplage inductif - Partie 3 : analyse
NF ISO 15202-1:2020 Air des lieux de travail - Détermination des métaux et métalloïdes dans les particules en suspension dans l'air par spectrométrie d'émission atomique avec plasma à couplage inductif - Partie 1 : prélèvement d'échantillons
NF C19-118*NF EN 62618:2017 Radiation protection instrumentation - Spectroscopy-based alarming personal radiation detectors (SPRD) for the detection of illicit trafficking of radioactive material

ZA-SANS, Detect metal spectrometer

SANS 3497:2008 Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods
SANS 3497:1990 Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods
SANS 4518:1980 Metallic coatings - Measurement of coating thickness - Profilometric method

Professional Standard - Petroleum, Detect metal spectrometer

SY 5161-2002 Atomic absorption spectrometry method for determination of metal elements in rocks
SY/T 5161-2002 Determination of some metal elements in rocks by atomic absorption spectrometry
SY 5982-1994 Determination of metal elements in oil and gas field water by atomic absorption spectrometry
SY/T 5982-1994 Determination of metal elements in oil and gas field water by atomic absorption spectrometry

German Institute for Standardization, Detect metal spectrometer

DIN EN ISO 3497:2001 Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods (ISO 3497:2000); German version EN ISO 3497:2000
DIN 49860-2:2000 Metal halide lamps with spectral energy distribution similar to natural light - Part 2: Sports lighting
DIN EN 12938:2000 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry (includes AC:2000); German version EN 12938:1999 + AC:2000
DIN EN ISO 3497:2001-12 Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods (ISO 3497:2000); German version EN ISO 3497:2000
DIN EN 13523-3:2020 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison; German and English version prEN 13523-3:2020
DIN EN 13523-3:2023-08 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison; German and English version prEN 13523-3:2023 / Note: Date of issue 2023-07-14*Intended as replacement for DIN EN 13523-3 (2022-01).
DIN EN 13523-3:2022-01 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison; German version EN 13523-3:2021
DIN 50990:2018-12 Measurement of coating thickness - Measurement of the area-related mass of metallic layers by means of spectrometric measurement methods
DIN 25708:1995 Determination of metallic impurities in nuclear fuels by optical emission spectrometry with inductively coupled plasma excitation
DIN EN ISO 11876:2010-12 Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010); German version EN ISO 11876:2010
DIN 50157-2:2008 Metallic materials - Hardness testing with portable measuring instruments operating with mechanical penetration depth - Part 2: Verification and calibration of the testing devices
DIN 50990:1993 Measurement of coating thickness; determination of the mass per unit area of metallic coatings by atomic absorption spectrometric method; flame method, F AAS
DIN EN 10188:1990 Chemical analysis of ferrous materials; determination of chromium in steels and iron; flame atomic absorption spectrometric method; German version EN 10188:1989
DIN EN ISO 11212-2:1997 Starch and derived products - Heavy metals content - Part 2: Determination of mercury content by atomic absorption spectrometry (ISO 11212-2:1997); German version EN ISO 11212-2:1997
DIN EN ISO 11212-1:1997 Starch and derived products - Heavy metals content - Part 1: Determination of arsenic content by atomic absorption spectrometry (ISO 11212-1:1997); German version EN ISO 11212-1:1997
DIN EN 10188:1990-04 Chemical analysis of ferrous materials; determination of chromium in steels and iron; flame atomic absorption spectrometric method; German version EN 10188:1989
DIN EN 10211:2014-03 Chemical analysis of ferrous materials - Determination of titanium in steels and cast irons - Flame atomic absorption spectrometric method; German version EN 10211:2013
DIN EN 13523-3:2022 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison; German version EN 13523-3:2021
DIN EN ISO 11876:2010 Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010); German version EN ISO 11876:2010

CZ-CSN, Detect metal spectrometer

CSN 75 7554-1998 Water quality - Determination of selected polynuclear aromatic hydrocarbons (PAH) - HPLC (FLD) and GC (MSD) methods
CSN 42 0648 Cast.4-1986 Chemical analysis of metallic chromium. Determination of iron by the photometric and the atomic absorption method methods
CSN 42 0648 Cast.6-1986 Chemical analysis of metallic chromium. Determination of copper by the photometric and the atomic absorption method methods
CSN 42 0648 Cast.9-1986 Chemical analysis of metallic chromium. Determination of bismuth, lead and zinc by the polarographic method and determination of lead by the atomic absorption method
CSN 42 0613 Cast.11-1974 Chemical analysis of bearing lead and calcium metala. Determination of iron by atomic absorption
CSN 42 0648 Cast.10-1986 Chemical analysis of metallic chromium. Determination of aluminum by titration and atomic absorption method
CSN 40 4009-1974 Determination of concentrations of heavy metals and foreign mattere in radioactive preparations by emission spectrography
CSN ISO 3846-4:1994 Paints and vamishes. Determination of ?soluble" metal content Part 4: Determinalion of cadmium content. Flame atomic absorption spectrometric method and polarographic method

BE-NBN, Detect metal spectrometer

NBN EN ISO 3868:1995 Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam nterferometry method (ISO 3868:1976)

Danish Standards Foundation, Detect metal spectrometer

DS/EN ISO 3497:2001 Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods
DS/EN ISO 4518:1995 Metallic coatings - Measurement of coating thickness - Profiliometric method
DS/EN 13523-3:2021 Coil coated metals – Test methods – Part 3: Colour difference and metamerism – Instrumental comparison
DS/CEN/TR 10354:2012 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
DS/ISO 6101/1:1984 Rubber. Determination of metal content. Flame atomic absorption spectrometric method. Part 1: Determination of zinc content
DS/EN 10136:1989 Chemical analysis of ferrous materials - Determination of nickel in steels and irons - Flame atomic absorption spectrometric method
DS 259:1982 Determination of metals in water, sludge and sediment. General guidelines for detrmination by atomic absorption spectrophotometry in flame
DS/EN ISO 11212-1:1997 Starch and derived products - Heavy metals content - Part 1: Determination of arsenic content by atomic absorption spectrometry
DS/EN 10211:1996 Chemical analysis of ferrous materials - Determination of titanium in steel and iron - Flame atomic absorption spectrometric method
DS/EN ISO 11876:2010 Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method
DS/ISO 3856/4:1982 Paints and varnishes. Determination of "soluble" metal content. Part 4: Determination of cadmium content. Flame atomic absorption spectroscopic method and polarographic method
DS/EN 10188:1989 Chemical analysis of ferrous materials. Determination of chromium in steels and irons. Flame atomic absorption spectrometric method
DS/ISO 3856/1:1982 Paints and varnishes.Determination of"soluble"metal content. Part 1: Determination of lead content. Flame atomic absorption spectroscopic method and dithizione spectrophotometric method

RO-ASRO, Detect metal spectrometer

STAS SR ISO 3497:1992 Metallic coatings. Measurement of coating thickness. X-ray spectro-metrie methods
STAS SR EN 24943-1994 Chemical analysis of ferrous metal. Determination of copper content. Flame atomic absorption spectrometric method
STAS SR EN 10188-1994 Chemical analysis of ferrous materials. Determination of chromium in steels and irons. Flame atomic absorption spectrometric method

International Organization for Standardization (ISO), Detect metal spectrometer

ISO 3497:1990 Metallic coatings; measurement of coating thickness; X-ray spectrometric methods
ISO 3497:1976 Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods
ISO 3497:2000 Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods
ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
ISO 6101-6:2011 Rubber - Determination of metal content by atomic absorption spectrometry - Part 6: Determination of magnesium content
ISO 6101-6:2018 Rubber - Determination of metal content by atomic absorption spectrometry - Part 6: Determination of magnesium content
ISO 11876:2010 Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method
ISO/TS 25138:2010 Surface chemical analysis - Analysis of metal oxide films by glow-discharge optical-emission spectrometry
ISO 16962:2005 Surface chemical analysis - Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
ISO 6101-5:2006 Rubber - Determination of metal content by atomic absorption spectrometry - Part 5: Determination of iron content
ISO 6101-5:1990 Rubber; determination of metal content by atomic absorption spectrometry; part 5: determination of iron content
ISO 6101-5:2018 Rubber - Determination of metal content by atomic absorption spectrometry - Part 5: Determination of iron content
ISO 6101-3:2014 Rubber - Determination of metal content by atomic absorption spectrometry - Part 3: Determination of copper content
ISO 6101-4:2014 Rubber - Determination of metal content by atomic absorption spectrometry - Part 4: Determination of manganese content
ISO 6101-3:1988 Rubber; determination of metal content by atomic absorption spectrometry; part 3: determination of copper content
ISO 6101-4:1988 Rubber; determination of metal content by atomic absorption spectrometry; part 4: determination of manganese content
ISO 6101-1:1991 Rubber; determination of metal content by atomic absorption spectrometry; part 1: determination of zinc content
ISO 6101-4:2022 Rubber — Determination of metal content by atomic absorption spectrometry — Part 4: Determination of manganese content
ISO 6101-2:2019 Rubber — Determination of metal content by atomic absorption spectrometry — Part 2: Determination of lead content
ISO 6101-1:2019 Rubber — Determination of metal content by atomic absorption spectrometry — Part 1: Determination of zinc content
ISO 6101-3:2022 Rubber — Determination of metal content by atomic absorption spectrometry — Part 3: Determination of copper content
ISO 15202-1:2012 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling
ISO 15202-1:2000 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling
ISO 3856-1:1983 Paints and varnishes — Determination of "soluble" metal content — Part 1: Determination of lead content — Flame atomic absorption spectroscopic method and dithizone spectrometric method
ISO 3856-1:1980 Title missing - Legacy paper document
ISO 3868:1976 Metallic and other non-organic coatings; Measurement of coating thicknesses; Fizeau multiple-beam interferometry method
ISO 6101-1:1981 Rubber; Determination of metal content; Flame atomic absorption spectrometric method; Part 1 : Determination of zinc content
ISO 6101-2:1986 Rubber; Determination of metal content; Flame atomic absorption spectrometric method; Part 2 : Determination of lead content
ISO 19050:2015 Rubber, raw, vulcanised - Determination of metal content by ICP-OES
ISO 3856-4:1984 Paints and varnishes; Determination of "soluble" metal content; Part 4 : Determination of cadmium content; Flame atomic absorption spectrometric method and polarographic method
ISO 3856-4:1980 Paints and varnishes — Determination of "soluble" metal content — Part 4: Determination of cadmium content — Flame atomic absorption spectroscopic method and polarographic method
ISO 15202-3:2004 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 3: Analysis
ISO 3856-1:1984 Paints and varnishes; Determination of "soluble" metal content; Part 1 : Determination of lead content; Flame atomic absorption spectrometric method and dithizone spectrophotometric method
ISO 3856-2:1984 Paints and varnishes; Determination of "soluble" metal content; Part 2 : Determination of antimony content; Flame atomic absorption spectrometric method and Rhodamine B spectrophotometric method

British Standards Institution (BSI), Detect metal spectrometer

BS EN ISO 3497:2001 Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods
BS ISO 6101-2:2019 Rubber. Determination of metal content by atomic absorption spectrometry - Determination of lead content
BS ISO 6101-1:2019 Rubber. Determination of metal content by atomic absorption spectrometry - Determination of zinc content
BS EN ISO 376:2011 Metallic materials. Calibration of force-proving instruments used for the verification of uniaxial testing machines
BS ISO 6101-3:2014 Rubber. Determination of metal content by atomic absorption spectrometry. Determination of copper content
BS ISO 6101-4:2014 Rubber. Determination of metal content by atomic absorption spectrometry. Determination of manganese content
BS ISO 6101-5:2006 Rubber - Determination of metal content by atomic absorption spectrometry - Determination of iron content
BS ISO 6101-5:2018 Rubber. Determination of metal content by atomic absorption spectrometry. Determination of iron content
BS EN 60811-202:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General tests. Measurement of thickness of non-metallic sheath
BS EN 60811-100:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General
BS ISO 15202-1:2012 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sampling
BS EN 60811-606:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Methods for determining the density
BS EN 60811-502:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Shrinkage test for insulations
BS ISO 6101-6:2011 Rubber. Determination of metal content by atomic absorption spectrometry. Determination of magnesium content
BS ISO 6101-6:2018 Rubber. Determination of metal content by atomic absorption spectrometry. Determination of magnesium content
BS ISO 6101-3:2022 Tracked Changes. Rubber. Determination of metal content by atomic absorption spectrometry. Determination of copper content
BS ISO 6101-4:2022 Tracked Changes. Rubber. Determination of metal content by atomic absorption spectrometry. Determination of manganese content
BS 6810-1:1987 Determination of metals in textiles - Analysis by atomic absorption and colorimetric spectroscopy
BS EN ISO 11212-1:1997 Starch and derived products. Heavy metals content. Determination of arsenic content by atomic absorption spectrometry
BS EN ISO 11212-2:1997 Starch and derived products. Heavy metals content. Determination of mercury content by atomic absorption spectrometry
BS EN IEC 62484:2021 Tracked Changes. Radiation protection instrumentation. Spectrometric radiation portal monitors (SRPMs) used for the detection and identification of illicit trafficking of radioactive material
BS EN ISO 3868:1995 Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method
BS ISO 15093:2015 Jewellery. Determination of precious metals in 999 0/00 gold, platinum and palladium jewellery alloys. Difference method using ICP-OES
BS ISO 15093:2008 Jewellery - Determination of precious metals in 999 0/00 gold, platinum and palladium jewellery alloys - Difference method using inductively coupled plasma optical emission spectroscopy (ICP-OES)
BS ISO 15093:2020 Tracked Changes. Jewellery and precious metals. Determination of high purity gold, platinum and palladium. Difference method using ICP-OES
BS EN 10177:2019 Chemical Analysis of Ferrous Materials Determination of Calcium in Steels Flame Atomic Absorption Spectrometric Method
BS 6810-2:2005 Determination of metals in textiles - Analysis by atomic emission spectroscopy
18/30359447 DC BS ISO 6101-1. Rubber. Determination of metal content by atomic absorption spectrometry. Part 1. Determination of zinc content
21/30410888 DC BS ISO 6101-4. Rubber. Determination of metal content by atomic absorption spectrometry. Part 4. Determination of manganese content
21/30410885 DC BS ISO 6101-3. Rubber. Determination of metal content by atomic absorption spectrometry. Part 3. Determination of copper content
BS EN ISO 11876:2010 Hardmetals. Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders. Flame atomic absorption spectrometric method
BS ISO 15202-1:2020 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Sampling
BS ISO 15202-2:2012 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sample preparation
BS ISO 15202-2:2020 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Sample preparation
BS ISO 15202-3:2004 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Analysis
BS EN 10181:2019 Chemical Analysis of Ferrous Materials Determination of Lead in Steels Flame Atomic Absorption Spectrometric Method
BS EN 10136:1991 Chemical analysis of ferrous materials - Determination of nickel in steels and irons - Flame atomic absorption spectrometric method
BS EN 60811-507:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Hot set test for cross-linked materials
BS EN ISO 11212-4:1997 Starch and derived products - Heavy metals content - Determination of cadmium content by atomic absorption spectrometry with electrothermal atomization
BS EN ISO 11212-3:1997 Starch and derived products. Heavy metals content. Determination of lead content by atomic absorption spectrometry with electrothermal atomization
18/30373525 DC BS IEC 62484. Radiation protection instrumentation. Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material
18/30385699 DC BS IEC 62484. Radiation protection instrumentation. Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material

Professional Standard - Chemical Industry, Detect metal spectrometer

HG/T 4079-2009 Metal surface polishing inspecting procedure and rule
HG/T 2415-2007 Photographic chemicals.Measurement methods of the trace-metals in the color couples.Flame photometry of the atomic absorbs
HG/T 2415-1993 Photographic Chemicals - Determination of Trace Metals in Couplers - Flame Atomic Absorption Spectrometry

TR-TSE, Detect metal spectrometer

TS 3181-1978 Metallic Coatings Measurement Of Coating Thickness - X - Ray Spectrometric Methods

Shaanxi Provincial Standard of the People's Republic of China, Detect metal spectrometer

DB61/T 1162-2018 Determination of Heavy Metal Elements in Soil by Energy Dispersive X-ray Fluorescence Spectrometry

AENOR, Detect metal spectrometer

UNE 81587:2017 Workplace exposure. Determination of metals and metalloids in airborne particles. Atomic Spectrometry method.
UNE-EN ISO 3497:2001 Metallic coatings. Measurement of coating thickness. X-ray spectrometric methods. (ISO 3497:2000).
UNE 36329-1:1991 CHEMICAL ANALYSIS OF FERROUS METAL. DETERMINATION OF COPPER CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.
UNE 36339-1:1989 Chemical analysis of ferrous materials - Determination of lead in steels - Flame atomic absorption spectrometric method
UNE 36320-1:1989 Chemical analysis of ferrous materials - Determination of calcium in steels - Flame atomic absorption spectrometric method
UNE 36326-1:1989 Chemical analysis of ferrous materials - Determination of nickel in steels and irons - Flame atomic absorption spectrometric method
UNE 36324-1:1991 Chemical analysis of ferrous materials - Determination of chromium in steels and irons - Flame atomic absorption spectrometric method
UNE-EN 10211:2014 Chemical analysis of ferrous materials - Determination of titanium in steels and cast irons - Flame atomic absorption spectrometric method
UNE-EN ISO 11876:2011 Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010)

PL-PKN, Detect metal spectrometer

PN C04570-08-1987 Water and waste water Tests for metals by atomie absorption spectrometry Determination of total chromium
PN EN 24943-1992 Chemical analysis of ferrous metal. Determination of copper content. Flame atomic absorption spectrometric method
PN C04570-01-1992 Water and waste water Test tor metals by atomie absorption spectrometry Determination ot zinc, copper, cadmium, nickel, manganese, lead, cobalt and iron
PN EN 10181-1992 Chemical analysis of ferrous materials. Determination of lead in steels. Flame atomic absorption spectrometric method
PN EN 10177-1993 Chemical analysis of ferrous materials Determination of calcium in steels Flame atomie absorption spectrometric method
PN EN 10136-1992 Chemical analysis of ferrous materials. Determination of knickel in steels and irons. Flame atomic absorption spectrometric method
PN EN 10188-1992 Chemical analysis of ferrous materials Determination of chromi um in steels and irons Flame atomie absorption spectrometric inethod

国家市场监督管理总局、中国国家标准化管理委员会, Detect metal spectrometer

GB/T 13634-2019 Metallic materials—Calibration of force-proving instruments used for the verification of uniaxial testing machines
GB/T 36764-2018 Rubber compounding ingredients—Silica, precipitated, hydrated—Determination of heavy metal content by inductively coupled plasma atomic emission spectrometric method
GB/T 37248-2018 High purity aluminium oxide—Determination of trace metal elements—Inductively coupled plasma optical emission spectrometry
GB/T 26642-2022 Non-destructive testing—Industrial computed radiography with storage phosphor imaging plates—General principles for testing of metallic materials using X-rays and gamma rays

European Committee for Standardization (CEN), Detect metal spectrometer

EN ISO 4518:2021 Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:2021)
EN ISO 3497:2000 Metallic Coatings - Measurement of Coating Thickness - X-Ray Spectrometric Methods ISO 3497:2000
EN ISO 11876:2010 Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010)
EN ISO 4518:1995 Metallic Coatings - Measurement of Coating Thickness - Profilometric Method (ISO 4518:1990)
CEN/TR 10354:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
prEN 10002-4-1991 Metallic materials; part 1: verification of extensometers used in uniaxial testing
EN 24943:1990 Steel and cast iron ?Determination of copper content ?Flame atomic absorption spectrometric method
PD CEN/TR 10354:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
CEN/TR 10362:2014 Chemical analysis of ferrous materials - Determination of selenium in steels - Electrothermal atomic absorption spectrometric method
EN 10177:1989 Chemical Analysis of Ferrous Materials Determination of Calcium in Steels Flame Atomic Absorption Spectrometric Method
PD CEN/TR 10362:2014 Chemical analysis of ferrous materials - Determination of selenium in steels - Electrothermal atomic absorption spectrometric method
EN 24943:1990/AC:1991 Chemical analysis of ferrous metal; determination of copper content; flame atomic absorption spectrometric method; amendment (ISO 4943:1985)
EN 10047:1989 Chemical Analysis of Ferrous Materials Determination of Calcium in Steels Flame Atomic Absorption Spectrometric Method
EN 10188:1989 Chemical Analysis of Ferrous Materials Determination of Chromium in Steels and Irons Flame Atomic Absorption Spectrometic Method
EN 10136:1989 Chemical Analysis of Ferrous Materials Determination of Nickel in Steels and Irons Flame Atomic Absorption Spectrometric Method
EN 10181:1989 Chemical Analysis of Ferrous Materials Determination of Lead in Steels Flame Atomic Absorption Spectrometric Method
EN ISO 3868:1994 Metallic and Other Non- Organic Coatings - Measurement of Coating Thicknesses - Fizeau Multiple-Beam Interferometry Method (ISO 3868 : 1976)
PD CEN/TR 10353:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry

Lithuanian Standards Office , Detect metal spectrometer

LST EN ISO 3497:2002 Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods (ISO 3497:2000)
LST EN 10181-2000 Chemical analysis of ferrous materials - Determination of lead in steels - Flame atomic absorption spectrometric method
LST EN 10177-2000 Chemical analysis of ferrous materials - Determination of calcium in steels - Flame atomic absorption spectrometric method
LST EN 10136-2000 Chemical analysis of ferrous materials - Determination of nickel in steels and irons - Flame atomic absorption spectrometric method
LST EN 24943-2000 Chemical analysis of ferrous metal - Determination of copper content - Flame atomic absorption spectrometric method (ISO 4943:1985)
LST EN 10188-2000 Chemical analysis of ferrous materials - Determination of chromium in steels and irons - Flame atomic absorption spectrometric method
LST EN 10211-2000 Chemical analysis of ferrous materials - Determination of titanium in steel and iron - Flame atomic absorption spectrometric method
LST EN ISO 11876:2010 Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010)

国家能源局, Detect metal spectrometer

NB/SH/T 0934-2016 Standard test method for determination of trace elements in petroleum coke by wavelength dispersive X-ray fluorescence Spectroscopy
SH/T 0934-2016 Determination of trace metal elements in petroleum coke by wavelength dispersive X-ray fluorescence spectrometry

KR-KS, Detect metal spectrometer

KS M ISO 6101-5-2019 Rubber — Determination of metal content by atomic absorption spectrometry — Part 5: Determination of iron content
KS D 1813-2003(2023) Chemical analysis of ferrous materials determination of lead in steels－Flame atomic absorption spectrometric method
KS M ISO 3856-4-2022 Paints and varnishes — Determination of “soluble” metal content — Part 4: Determination of cadmium content — Flame atomic absorption spectrometric method and polarographic method
KS M ISO 3856-1-2017 Paints and varnishes－Determination of “soluble” metal content－Part 1：Determination of lead content－Flame atomic absorption spectrometric method and dithizone spectrophotometric method
KS M ISO 3856-1-2022 Paints and varnishes — Determination of “soluble” metal content — Part 1: Determination of lead content — Flame atomic absorption spectrometric method and dithizone spectrophotometric method
KS I ISO 15202-3-2021 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 3: Analysis

NO-SN, Detect metal spectrometer

NS 4783-1988 Water analysis - Metal content of biological material determined by atomic absorption spectrometry
NS 4770-1994 Water analysis. Determination of metals by atomic absorption spectrometry, atomization in flame. General principles and guidelines

Professional Standard - Electricity, Detect metal spectrometer

DL/T 2220-2021 Technical regulations for instrumented indentation method testing of mechanical properties of metal materials in power stations
DL/T 1458-2015 Determination of copper, iron, aluminum and zinc contents in mineral insulating oil-Atomic absorption spectrometry method
DL/T 1550-2016 Method for Determination of Copper and Iron Content in Mineral Insulating Oil Rotating Disk Electrode Emission Spectrometry

Professional Standard - Non-ferrous Metal, Detect metal spectrometer

YS/T 372.15-2006 Methods for elementary analysis of precious alloy. Determination of antimony content. The flame atomic absorption spectrometric method
YS/T 372.6-2006 Methods for elementary analysis of precious alloy. Determination of copper content and manganese contents. The flame atomic absorption spectrometric method
YS/T 372.6-1994 Methods for elementary analysis of precious alloy. Determination of copper content and manganese contents. The flame atomic absorption spectrometric method

ES-UNE, Detect metal spectrometer

UNE-EN 13523-3:2022 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison
UNE-EN IEC 62484:2021 Radiation protection instrumentation - Spectrometric radiation portal monitors (SRPMs) used for the detection and identification of illicit trafficking of radioactive material (Endorsed by Asociación Española de Normalización in January of 2022.)
UNE-EN 62484:2015 Radiation protection instrumentation - Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material (Endorsed by AENOR in January of 2016.)
UNE-EN 62618:2016 Radiation protection instrumentation - Spectroscopy-based alarming Personal Radiation Detectors (SPRD) for the detection of illicit trafficking of radioactive material (Endorsed by AENOR in December of 2016.)

Inner Mongolia Provincial Standard of the People's Republic of China, Detect metal spectrometer

DB15/T 1462-2018 Determination of gold content in polymetallic ores Polyurethane foam adsorption-flame atomic absorption spectrometry

Japanese Industrial Standards Committee (JISC), Detect metal spectrometer

JIS K 0150:2009 Surface chemical analysis -- Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
JIS G 1323-7:2017 Method for chemical analysis of chromium metal -- Part 7: Determination of various elements -- ICP atomic emission spectrometric method

Military Standard of the People's Republic of China-General Armament Department, Detect metal spectrometer

GJB 770.201-1989 Test methods for gunpowder analysis Determination of metal element content Atomic absorption spectrometry
GJB 950.7-1990 Analysis method of trace elements of precious metals and their alloys. Determination of trace amounts of lead, antimony and bismuth in palladium alloys by graphite furnace atomic absorption spectrometry.

Standard Association of Australia （SAA）, Detect metal spectrometer

AS 4479.4:1999 Analysis of soils - Determination of metals in aqua regia extracts of soil by inductively coupled plasma-atomic emission spectrometry

Malaysia Standards, Detect metal spectrometer

Professional Standard - Energy, Detect metal spectrometer

NB/SH/T 0864-2013 Standard test method for determination of metals in lubricating greases by inductively coupled plasma atomic emission spectrometry

Professional Standard - Agriculture, Detect metal spectrometer

GB 10726-1989 General method for the determination of metal impurities by chemical reagent solvent extraction-atomic absorption spectrometry

International Electrotechnical Commission (IEC), Detect metal spectrometer

IEC 62484:2020 Radiation protection instrumentation - Spectrometric radiation portal monitors (SRPMs) used for the detection and identification of illicit trafficking of radioactive material
IEC 62618:2022 Radiation protection instrumentation - Spectroscopy-based alarming personal radiation detectors (SPRD) for the detection of illicit trafficking of radioactive material

ES-AENOR, Detect metal spectrometer

UNE 142-400-1994 Fertilizers Sampling from a conveyor by stopping the belt

Professional Standard - Commodity Inspection, Detect metal spectrometer

SN/T 2413-2010 Determination of total carbon and sulfur contents of silicon metal for import and export-Infrared absorption spectromentry
SN/T 2829-2011 Determination of heavy metal content in metal materials and food simulants of export food contact materials Inductively coupled plasma emission spectrometry
SN/T 3339-2012 Determination of heavy metal content on import and export textile.Inductively coupled plasma atomic emission spectrometric method(ICP-AES)
SN/T 1427-2004 Determination of silicon,iron,phosphorus in manganese metal--Inductively coupled plasma atomic emission spectrometry

Professional Standard - Environmental Protection, Detect metal spectrometer

HJ 781-2016 Solid waste – Determination of 22 metal elements – Inductively coupled plasma optical emission spectrometry
HJ 777-2015 Ambient air and waste gas from stationary sources emission -Determination of metal elements in ambient particle matter-Inductively coupled plasma optical emission spectrometry

Professional Standard - Petrochemical Industry, Detect metal spectrometer

SH/T 1835-2022 Determination of metal content of low carbon α-olefins by inductively coupled plasma emission spectrometry

未注明发布机构, Detect metal spectrometer

DIN EN 10211:1996 Chemical analysis of ferrous materials – Determination of titanium in steel and iron — Flame atomic absorption spectrometric method
BS EN ISO 11212-2:1997(1999) Starch and derived products — Heavy metals content — Part 2 : Determination of mercury content by atomic absorption spectrometry
BS EN ISO 11212-1:1997(1999) Starch and derived products — Heavy metals content — Part 1 : Determination of arsenic content by atomic absorption spectrometry

General Motors do Brasil, Detect metal spectrometer

GMSA LTP 356-2011 Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Spectrometry Determina莽茫o de Metais de Desgaste, e Contaminantes em 脫leos lubrificantes ou Flu铆dos Hidr谩ulicos usados Do Not use on New Programs; No Replacement

European Committee for Electrotechnical Standardization（CENELEC）, Detect metal spectrometer

EN 62484:2015 Radiation protection instrumentation - Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material
EN 62618:2016 Radiation protection instrumentation - Spectroscopy-based alarming Personal Radiation Detectors (SPRD) for the detection of illicit trafficking of radioactive material

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Detect metal spectrometer

GB/T 33324-2016 Determination of heavy metal content of latex products—Inductively coupled plasma atomic emission spectrometry
GB/T 4702.6-2016 Chromium metal—Determination of iron, aluminium, silicon and copper content—Inductively coupled plasma atomic emission spectrometry method
GB/T 33422-2016 Thermoplastic elastomer—Determination of heavy metal contents— Inductively coupled plasma atomic emission spectrometric method

廊坊市市场监督管理局, Detect metal spectrometer

DB1310/T 229-2020 Determination of metal element content in high-purity carbon materials by inductively coupled plasma optical emission spectrometry

FI-SFS, Detect metal spectrometer

SFS 5071-1989

Shandong Provincial Standard of the People's Republic of China, Detect metal spectrometer

DB37/T 4493-2022 Determination of major heavy metal elements in marine sediments by inductively coupled plasma emission spectrometry
DB37/T 4494-2022 Determination of major heavy metal elements in marine organisms by inductively coupled plasma emission spectrometry

BR-ABNT, Detect metal spectrometer

ABNT ISO/TS 24348:2020 Ophthalmic optics - Spectacle frames - Method for the simulation of wear and detection of nickel release from metal and combination spectacle frames