ZH
RU
ES

Electrical aging and thermal aging tests of insulating parts

Electrical aging and thermal aging tests of insulating parts, Total:333 items.

In the international standard classification, Electrical aging and thermal aging tests of insulating parts involves: Insulating materials, Insulating fluids, Electricity. Magnetism. Electrical and magnetic measurements, Cellular materials, Glass, Construction materials, Electrical wires and cables, Elements of buildings, Leather technology, Insulation, Rubber, Industrial furnaces, Aerospace electric equipment and systems, Solar energy engineering, Reinforced plastics, Power transmission and distribution networks, Road engineering, Waxes, bituminous materials and other petroleum products, Materials for aerospace construction, Capacitors, Piezoelectric and dielectric devices, Protection of and in buildings, Electromechanical components for electronic and telecommunications equipment, Pipeline components and pipelines, Technical drawings, Semiconductor devices, Mechanical structures for electronic equipment, Nuclear energy engineering, Electrical accessories, On-board equipment and instruments, Fruits. Vegetables, Welding, brazing and soldering, Domestic, commercial and industrial heating appliances.

RU-GOST R, Electrical aging and thermal aging tests of insulating parts

GOST R IEC 811-1-2-1994 Common test methods for insulating and sheathing materials of electric cables. Termal ageing methods
GOST IEC 60811-401-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 401. Miscellaneous tests. Thermal ageing methods. Ageing in an air oven
GOST IEC 60811-1-2-2011 Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-2. Methods for general application. Thermal ageing methods
GOST IEC 60811-412-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 412. Miscellaneous tests. Thermal ageing methods. Ageing in an air bomb
GOST 27905.2-1988 Electrical insulation systems. Evaluation of performances evaluation, ageing mechanism, diagnostic procedures
GOST R 56773-2015 Composites. Method of accelerated ageining tests of absorptive electrochromic coatings on sealed insulating glass units
GOST R IEC 60811-1-2-2006 Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-2. Methods for general application. Thermal ageing methods
GOST IEC 60811-510-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 510. Mechanical tests. Methods specific to polyethylene and polypropylene compounds. Wrapping test after thermal ageing in air
GOST R IEC 60811-3-2-1994 Methods specific to PVC compaunds of insulating and sheathing materials of electric cables. Loss of mass test. Thermal stability test
GOST IEC 60034-18-22-2014 Rotating electrical machines. Part 18-22. Functional evaluation of insulation systems. Test procedures for wire-wound windings. Classification of changes and insulation component substitutions
GOST R IEC 60811-3-1-1994 Test methods specific to PVC insulating and sheathing compaunds of electric and optical cables. Pressure test at high temperature. Test for resistance to cracking
GOST IEC 60931-2-2013 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V. Part 2. Ageing test and destruction test
GOST IEC 60811-410-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 410. Miscellaneous tests. Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors

British Standards Institution (BSI), Electrical aging and thermal aging tests of insulating parts

BS EN 60216-1:2013 Electrical insulating materials. Thermal endurance properties. Ageing procedures and evaluation of test results
BS EN 60216-1:2002 Guide for the determination of thermal endurance properties of electrical insulating materials - Ageing procedures and evaluation of test results
BS EN 60811-401:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Thermal ageing methods. Ageing in an air oven
BS EN 60811-412:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Thermal ageing methods. Ageing in an air bomb
BS 7836:1996 Measurement of the average viscometric degree of polymerization of new and aged electric papers
BS ISO 11561:1999 Ageing of thermal insulation materials - Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
BS EN 60811-1-2:1995 Insulating and sheathing materials of electric cables - Common test methods - General application - Thermal ageing methods
BS EN 60811-401:2012+A1:2017 Electric and optical fibre cables. Test methods for non-metallic materials - Miscellaneous tests. Thermal ageing methods. Ageing in an air oven
BS EN 12697-45:2012 Bituminous mixtures. Test methods for hot mix asphalt. Saturation Ageing Tensile Stiffness (SATS) conditioning test
BS EN 1367-1:2007 Tests for thermal and weathering properties of aggregates - Determination of resistance to freezing and thawing
BS PD IEC/TS 62332-2:2014 Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components. Simplified test
BS EN 2591-220:2005 Elements of electrical and optical connection — Test methods — Part 220: Contact/conductor joint ageing by current and temperature cycling
BS EN 60811-4-2:2004 Insulating and sheathing materials of electric and optical cables - Common test methods - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test af
BS EN 60512-9-4:2011 Connectors for electronic equipment. Tests and measurements. Endurance tests. Test 9d. Durability of contact retention system and seals (maintenance, ageing)
BS 5173-106.2:1990 Methods of test for rubber and plastics hoses and hose assemblies - Environmental tests - General requirements for high temperature ageing tests
BS 6622:2007 Electric cables - Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV - Requirements and test methods
BS EN 60831-2:1996 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V. Ageing test, self-healing test and destruction test
BS EN 60831-2:2014 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V. Ageing test, self-healing test and destruction test
BS EN 60811-2-1:1998 Insulating and sheathing materials of electric cables - Common test methods - Methods specific to elastomeric compounds - Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests
PD IEC/TS 62332-2:2014 Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components. Simplified test
BS EN ISO 9455-17:2003 Soft soldering fluxes - Test methods - Surface insulation resistance comb test and electrochemical migration test of flux residues
BS 5173 Sec.106.2:1990 Methods of test for rubber and plastics hoses and hose assemblies. Environmental tests. General requirements for high temperature ageing tests
BS EN 60811-410:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
BS EN 60811-3-2:1995 Insulating and sheathing materials of electric cables - Common test methods - Methods specific to PVC compounds - Loss of mass test - Thermal stability test

American National Standards Institute （ANSI), Electrical aging and thermal aging tests of insulating parts

ANSI/ASTM D3251:2004 Test Method for Thermal-Aging Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire (10.02)

Professional Standard - Machinery, Electrical aging and thermal aging tests of insulating parts

JB/T 1544-2015 Rapid test procedure for thermal endurance of electrical insulating impregnting varnishes and varnished fabrics.Thermogravameric point slope(TPS) method
JB/T 1544-1999 Rapid test procedure for thermal endurance of electrical insulating impregnating varnishes and varnished fabrics-thermogravameric point slope (TPS)method

未注明发布机构, Electrical aging and thermal aging tests of insulating parts

DIN EN 60811-1-2-DIN VDE 0473 Teil 811-1-2:2001 Insulating and sheathing materials for cables and insulated lines General test methods Part 1: General application – Main section 2: Thermal aging
BS 903-A19:1986(1999) Methods of testing vulcanized rubber — Part A19 : Heat resistance and accelerated ageing tests — [ ISO title : Rubber, vulcanized — Accelerated ageing or heat - resistance tests ]
BS EN 60811-1-2:1995(2002) Common test methods for insulating and sheathing materials of electric and optical cables — Part 1 - 2 : General application — Thermal ageing methods
BS ISO 11561:1999(2000) Ageing of thermal insulation materials — Determination of the long - term change in thermal resistance of closed - cell plastics (accelerated laboratory test methods)
BS EN 60450:2004(2007) Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials

Professional Standard - Energy, Electrical aging and thermal aging tests of insulating parts

NB/T 42005-2013 Test method for thermal voltage-endurance testing on groundwall insulation of stator coil of high voltage AC machines
NB/T 42004-2013 Test method for voltage-endurance test on groundwall insulation of stator coil of high voltage AC machines

PT-IPQ, Electrical aging and thermal aging tests of insulating parts

American Society for Testing and Materials (ASTM), Electrical aging and thermal aging tests of insulating parts

ASTM D1934-95(2005) Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
ASTM D3251-99 Standard Test Method for Thermal-Aging Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire
ASTM D1934-20 Standard Test Method for Oxidative Aging of Electrical Insulating Liquids by Open-Beaker Method
ASTM D2126-15 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM E2141-21 Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units
ASTM D1934-95(2000) Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
ASTM D1934-95(2012) Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
ASTM D2126-99 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM E773-97 Standard Test Method for Accelerated Weathering of Sealed Insulating Glass Units
ASTM E773-01 Standard Test Method for Accelerated Weathering of Sealed Insulating Glass Units
ASTM E773-88 Standard Test Methods for Seal Durability of Sealed Insulating Glass Units
ASTM D2126-04 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM D4243-99(2009) Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards
ASTM E2141-14 Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units
ASTM D1698-03 Standard Test Method for Sediments and Soluble Sludge in Service-Aged Insulating Oils
ASTM D1698-03(2008) Standard Test Method for Sediments and Soluble Sludge in Service-Aged Insulating Oils
ASTM D4243-99(2004)e1 Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards
ASTM D4243-99 Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards
ASTM E2953-14 Standard Specification for Evaluating Accelerated Aging Performance of Electrochromic Devices in Sealed Insulating Glass Units
ASTM E1596-99 Standard Test Methods for Solar Radiation Weathering of Photovoltaic Modules
ASTM D2126-09 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM E2953-14(2020)e1 Standard Specification for Evaluating Accelerated Aging Performance of Electrochromic Devices in Sealed Insulating Glass Units
ASTM C792-04 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C792-93(1998) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C792-15(2020) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C792-23 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C792-15 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C1246-17(2022) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM D4798-01 Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798-00 Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798/D4798M-11 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798/D4798M-11(2021) Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798-08 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798/D4798M-10 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798-04 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798/D4798M-09 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D1148-95(2001) Standard Test Method for Rubber Deterioration8212;Heat and Ultraviolet Light Discoloration of Light-Colored Surfaces
ASTM C1246-00 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM C1246-17 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM C1246-00(2006) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM C1246-00(2012) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM D4798/D4798M-11(2016) Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4243-23 Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards
ASTM D4799/D4799M-08(2013)e1 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
ASTM D4799/D4799M-17(2023) Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
ASTM D4799/D4799M-17 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)

International Electrotechnical Commission (IEC), Electrical aging and thermal aging tests of insulating parts

IEC 60216-1:2001 Electrical insulating materials - Properties of thermal endurance - Part 1: Ageing procedures and evaluation of test results
IEC 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
IEC 60450:2004/AMD1:2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials; Amendment 1
IEC 60811-401:2012/AMD1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven; Amendment 1
IEC 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC 60811-401:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
IEC 60811-401:2012+AMD1:2017 CSV Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC 60216-1:1990 Guide for the determination of thermal endurance properties of electrical insulating materials; part 1: general guidelines for ageing procedures and evaluation of test results
IEC 60450:2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
IEC 60811-1-2:1985 Common test methods for insulating and sheathing materials of electric cables; part 1: methods for general application; section two: thermal ageing methods
IEC 60610:1978 Principal aspects of functional evaluation of electrical insulation systems; Ageing mechanisms and diagnostic procedures
IEC 60450:2004 Measurement of the average viscometric degree of polymerisation of new and aged cellulosic electrically insulating materials
IEC 60216-4-2:2000 Electrical insulating materials - Thermal endurance porperties - Part 4-2: Ageing ovens; Precision ovens for use up to 300 °C
IEC 60450:2004+AMD1:2007 CSV Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
IEC 60811-1-2:1985/AMD1:1989 Common test methods for insulating and sheathing materials of electric cables; part 1: methods for general application; section two: thermal ageing methods; amendment No. 1 to IEC 60811-1-2:1985
IEC 60811-1-2/COR1:1986 Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section 2: Thermal ageing methods; Corrigendum 1
IEC 60216-4-1:1990 Guide for the determination of thermal endurance properties of electrical insulating materials; part 4: ageing ovens; section 1: single-chamber ovens
IEC 60811-1-2:1985/AMD2:2000 Common tests methods for insulating and sheathing materials of electric and optical cables - Part 1-2: Methods for general application; Thermal ageing methods; Amendment 2
IEC 60811-4-1:1985 Common test methods for insulating and sheathing materials of electric cables. Part 4 : Methods specific to polythylene and polypropylene compounds. Section One - Resistance to environmental stress cracking - Wrapping test after thermal ageing in air - Me
IEC TS 60110-2:2000 Power capacitors for induction heating installations - Part 2: Ageing test, destruction test and requirements for disconnecting internal fuses
IEC TS 62332-2:2014 Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 2: Simplified test
IEC 60811-4-2:1990 Common test methods for insulating and sheathing materials of electric cables; part 4: methods specific to polyethylene and polypropylene compounds; section two: elongation at break after pre-conditioning; wrapping test after pre-conditioning; wrapping te
IEC 60811-4-1/AMD2:1993 Common test methods for insulating and sheathing materials of electric cables; part 4: methods specific to polyethylene and polypropylene compounds; section 1: resistance to environmental stress cracking; wrapping test after thermal ageing in air; measure
IEC 60811-510:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air
IEC 62884-3:2018 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 3: Frequency aging test methods
IEC 60811-4-2:2004 Insulating and sheathing materials of electric and optical fibre cables - Common test methods - Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature -
IEC 60191-6-16:2007 Mechanical standardization of semiconductor devices - Part 6-16: Glossary of semiconductor tests and burn-in sockets for BGA, LGA, FBGA and FLGA
IEC 112/233/CD:2012 IEC/TS 62332-2, Ed. 1: Electrical Insulation Systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 2: Simplified Test
IEC 60540:1982 Test methods for Insulations and sheaths of electric cables and cords (elastomeric and thermoplastic compounds) (Edition 2.0; Replaced by IEC 60811: 1990 Series)
IEC 60831-2:1988 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 660 V. Part 2: Ageing test, self-healing test and destruction test
IEC 112/256/DTS:2013 IEC/TS 62332-2, Ed. 1: Electrical Insulation Systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 2: Simplified Test
IEC 60811-410:2012/AMD1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors; Amendment 1
IEC 60512-9-4:2011 Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing)
IEC 60811-410:2012+AMD1:2017 CSV Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Electrical aging and thermal aging tests of insulating parts

GB/T 11026.1-2003 Electrical insulating materials-Properties of thermal endurance-Part 1:Ageing procedures and evaluation of test results
GB/T 11026.1-2016 Heat resistance of electrical insulating materials - Part 1: Aging procedures and evaluation of test results
GB/T 2951.12-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part 12:Methods for general application.Thermal ageing methods
GB/T 2951.2-1997 Common test methods for insulating and sheating materials of electric cables. Part 1: Methods for general application. Section two: Thermal ageing methods
GB/T 42164-2022 Leather—Chemical tests—Thermal ageing of leather and determination of hexavalent chromium
GB/T 11026.1-1989 Guide for the determination of thermal endurance properties of electrical insulating materials--Part 1:General guidelines for ageing procedures and evaluation of test results
GB/T 11026.4-1999 Guide for the determination of thermal endurance properties of electrical insulating materials-Part 4: Ageing ovens-Single-chamber ovens
GB/T 11026.5-2010 Electrical insulating materials.Thermal endurance properties.Part 5:Ageing ovens.Precision ovens for use up to 300℃
GB/T 29305-2012 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
GB/T 3984.2-2004 Power capacitors for induction heating installations Part 2:Ageing test,destruction test and requirements for disconnecting internal fuses
GB/T 2951.42-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part 42:Methods specific to polyethylene and polypropylene compounds.Tensile strength and elongation at break after conditioning at elevated temperature.Wrapping tes
GB/T 2951.9-1997 Common test methods for insulating and sheathing materials of electric cables. Part 4: Methods specific to polyethylene and polypropylene compounds. Section two: Elongation at break after pre-conditioning--Wrapping test after pre-conditioning--Wrapping
GB/T 6553-2014 Electrical insulating materials used under severe ambient conditions.Test methods for evaluating resistance to tracking and erosion
GB/T 6553-2003 Test methods for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions
GB/T 26169-2010 Electrical insulating materials.Method to evaluate the resistance to tracking and erosion.Rotating wheel dip test
GB/T 38265.17-2022 Test methods for soft soldering fluxes—Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues

Association Francaise de Normalisation, Electrical aging and thermal aging tests of insulating parts

NF C26-301:2002 Electrical insulating materials - Properties of thermal endurance - Part 1 : ageing procedures and evaluation of test results.
NF EN 60216-1:2013 Matériaux isolants électriques - Propriétés d'endurance thermique - Partie 1 : méthodes de vieillissement et évaluation des résultats d'essai
NF C26-301*NF EN 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: ageing procedures and evaluation of test results
NF C26-301:1990 Determination of thermal endurance properties of electrical insulating materials. General guidelines for ageing procedures and evaluation of test results.
NF C32-011-401*NF EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: miscellaneous tests - Thermal ageing methods - Ageing in an air oven
NF C32-025/A2:2001 Insulating and sheathing materials of electric cables - Common test methods - Part 1 : general application - Section 2 : thermal ageing methods.
NF C32-011-412*NF EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
NF EN 60811-412:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 412 : essais divers - Méthode de vieillissement thermique - Vieillissement dans une bombe à air
NF EN 60811-401/A1:2017 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 401 : essais divers - Méthodes de vieillissement thermique - Vieillissement en étuve à air
NF EN 60811-401:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 401 : essais divers - Méthodes de vieillissement thermique - Vieillissement en étuve à air
NF C32-025:1996 Insulating and sheathing materials of electric cables - Common test methods - Part 1 : general application - Section 2 : thermal ageing methods.
NF C26-270/A1*NF EN 60450/A1:2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
NF C32-011-401/A1*NF EN 60811-401/A1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401 : miscellaneous tests - Thermal ageing methods - Ageing in an air oven
NF C26-270*NF EN 60450:2004 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
NF L54-002-099*NF EN 2591-218:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 218 : ageing of terminal lugs and in-line splices by temperature and current cycling.
NF C26-304-2*NF EN 60216-4-2:2001 Electrical insulating materials - Thermal endurance properties - Part 4-2 : ageing ovens - Precision ovens for use up to 300 oC
NF EN 60450/A1:2007 Mesure du degré de polymérisation moyen viscométrique des matériaux isolants cellulosiques neufs et vieillis à usage électrique
NF EN 60450:2004 Mesure du degré de polymérisation moyen viscométrique des matériaux isolants cellulosiques neufs et vieillis à usage électrique
NF C32-032:1993 COMMON TEST METHODS FOR INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES. PART 4 : METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUDS. SECTION TWO. ELONGATION AT BREAK AFTER PRE-CONDITIONING. WRAPPING TEST AFTER THERMAL AGEING IN AIR. MEASUR
NF EN 60216-4-2:2001 Matériaux isolants électriques - Propriétés d'endurance thermique - Partie 4-2 : étuves de vieillissement - Étuves de précision pour des utilisations pouvant atteindre 300 oC
NF C33-045-5*NF EN 50483-5:2009 Test requirements for low voltage aerial bundled cable accessories - Part 5 : electrical ageing test.
NF P18-653-4*NF EN 1367-4:2008 Tests for thermal and weathering properties of aggregates - Part 4 : determination of drying shrinkage
NF P98-818-45:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 45 : Saturation Ageing Tensile Stiffness (SATS) conditioning test.
NF C32-011-510*NF EN 60811-510:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 510 : mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air
NF C93-684-3*NF EN IEC 62884-3:2018 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 3 : frequency aging test methods
NF C32-032:2004 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-2 : methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapp
NF C54-109*NF EN 60831-2:2014 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 2 : ageing test, self-healing test and destruction test
NF C54-109:1996 Shunt power capacitors of the self-healing type for A.C. Systems having a rated voltage up to and including 1 kv. Part 2 : ageing test self-heating test and destruction test.
NF C93-400-9-4*NF EN 60512-9-4:2012 Connectors for electronic equipment - Tests and measurements - Part 9-4 : endurance tests - Test 9d : durability of contact retention system and seals (maintenance, ageing).
NF EN 15062:2006 Adhésifs pour cuir et matériaux de la chaussure - Adhésifs à base de solvant et en dispersion - Essai de vieillissement des collages dans des conditions spécifiées
NF C96-013-6-16*NF EN 60191-6-16:2013 Mechanical standardization of semiconductor devices - Part 6-16 : glossary of semiconductor test and burn-in sockets for BGA, LGA, FBGA and FLGA
NF C26-221*NF EN 60587:2010 Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion.
NF C32-031:1996 Insulating and sheathing materials of electric cables. Common test methods. Part 4 : methods specific to polyethylene and polypropylene compounds. Section 1 : resistance to environmental stress cracking. Wrapping test after thermal ageing in air. Measurem
NF EN 60811-410/A1:2017 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 410 : essais divers - Méthode d'essai pour la mesure de la dégradation par oxydation catalytique par le cuivre des conducteurs isolés aux ...
NF EN 60811-410:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 410 : essais divers - Méthode d'essai pour la mesure de la dégradation par oxydation catalytique par le cuivre des conducteurs isolés aux ...
NF C32-011-410/A1*NF EN 60811-410/A1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 410 : miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
NF C32-011-410*NF EN 60811-410:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 410 : miscellaneous tests - Test method for copper-catalysed oxidative degradation of polyolefin insulated conductors
NF EN 60811-510:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 510 : essais mécaniques - Méthodes spécifiques pour les mélanges polyéthylène et polypropylène - Essai d'enroulement après vieillisse...
NF EN 2591-218:2002 Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 218 : vieillissement des cosses et des prolongateurs par cyclage en température et en courant

RO-ASRO, Electrical aging and thermal aging tests of insulating parts

STAS 10514/1-1991 DETERMINATION OF THERMAL RNDURANCE PROFERTIES OF ELECTRICAL INSULATING MATERIALS General guidelines for ageing and evaluation of test results
STAS 11388/2-1983 GABLES AND CORDS METHODS OF TEST Thermal aging
STAS 5162/4-1973 CABLES WITH THERMOPLASTIC MATERIAL, ELASTOMERE AND NATURAL RUBBER INSULATION AND SHEATH Methods of acceleiated aging
STAS SR CEI 811-4-2-1995 Common test methods for insulating and sheathing materials of electric cables. Part 4: Methods specific to polyethylene and polypropylene compounds. Section Two: Elongation at break after pre-conditioning-Wrapping test after pre-conditioning-Wrapping test

Korean Agency for Technology and Standards (KATS), Electrical aging and thermal aging tests of insulating parts

KS C IEC 60216-1:2008 Electrical insulating materials－Properties of thermal endurance－Part 1：Ageing procedures and evaluation of test results
KS C IEC 60216-1:2019 Electrical insulating materials — Thermal endurance properties — Part 1: Ageing procedures and evaluation of test results
KS C IEC 60450-2008(2018) Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulation materials
KS C IEC 60811-412:2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
KS C IEC 60811-412-2016(2021) Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
KS C IEC 60450:2008 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulation materials
KS M ISO 11561-2009(2019) Ageing of thermal insulation materials－Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods)
KS C IEC 60811-1-2:2002 Common test methods for insulating and sheathing materials of electric cables－Part 1：Methods for general application－Section 2：Thermal ageing methods
KS C IEC 60216-4-2:2002 Electrical insulating materials－Thermal endurance properties－Part 4－2：Ageing ovens－Precision ovens for use up to 300 ℃
KS C IEC 60216-4-1:2008 Guide for the determination of thermal endurance properties of electrical insulating materials－Part 4：Ageing ovens－Section 1：Single-chamber ovens
KS C IEC 60216-4-2-2002(2022) Electrical insulating materials－Thermal endurance properties－Part 4－2：Ageing ovens－Precision ovens for use up to 300 ℃
KS C IEC 60811-1-2:2020 Common test methods for insulating and sheathing materials of electric cables — Part 1: Methods for general application —Section 2: Thermal ageing methods
KS C IEC TS 60110-2-2017(2022) Power capacitors for induction heating installations - Part 2: Ageing test, destruction test and requirements for disconnecting internal fuses
KS C IEC 60811-510:2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 510: Mechanical tests ― Methods specific to polyethylene and polypropylene compounds ― Wrapping test after thermal ag
KS C IEC 60811-4-2-2005(2016) Insulating and sheathing materials of electric and optical cables－Common test methods－Part 4－2：Methods specific to polyethylene and polypropylene compounds－Tensile strength and elongation at break aft
KS C IEC 60811-510-2016(2021) Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 510: Mechanical tests ― Methods specific to polyethylene and polypropylene compounds ― Wrapping test after thermal ag
KS C IEC 60811-4-2:2005 Insulating and sheathing materials of electric and optical cables-Common test methods-Part 4-2:Methods specific to polyethylene and polypropylene compounds-Tensile strength and elongation at break after conditioning at elevated temperature-Wrapping test a
KS C IEC 60811-4-2-2005(2021) Insulating and sheathing materials of electric and optical cables－Common test methods－Part 4－2：Methods specific to polyethylene and polypropylene compounds－Tensile strength and elongation at break aft
KS C IEC 60831-2:2020 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V —Part 2: Ageing test, self-healing test and destruction test
KS C IEC TS 60110-2:2017 Power capacitors for induction heating installations - Part 2: Ageing test, destruction test and requirements for disconnecting internal fuses
KS C IEC 60831-2:2003 Shunt power capacitors of the self－healing type for a.c. systems having a rated voltage up to and including 1 000 V－Part 2：Ageing test, self－healing test and destruction test
KS C IEC 60811-410:2021 Electric and optical fibre cables — Test methods for non-metallic materials — Part 410: Miscellaneous tests — Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors

KR-KS, Electrical aging and thermal aging tests of insulating parts

KS C IEC 60216-1-2019 Electrical insulating materials — Thermal endurance properties — Part 1: Ageing procedures and evaluation of test results
KS C IEC 60811-412-2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
KS C IEC 60811-1-2-2020 Common test methods for insulating and sheathing materials of electric cables — Part 1: Methods for general application —Section 2: Thermal ageing methods
KS C IEC 60811-510-2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 510: Mechanical tests ― Methods specific to polyethylene and polypropylene compounds ― Wrapping test after thermal ag
KS C IEC 62884-3-2023 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators — Part 3: Frequency aging test methods
KS C IEC 60831-2-2020 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V —Part 2: Ageing test, self-healing test and destruction test
KS C IEC TS 60110-2-2017 Power capacitors for induction heating installations - Part 2: Ageing test, destruction test and requirements for disconnecting internal fuses
KS C IEC 60811-410-2021 Electric and optical fibre cables — Test methods for non-metallic materials — Part 410: Miscellaneous tests — Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors

YU-JUS, Electrical aging and thermal aging tests of insulating parts

JUS N.A5.200-1979 Ageing testing of electrical insulating materials. Statistical analysis ofageing test data. Methods based on mean values ofnormally distributed test results

Japanese Industrial Standards Committee (JISC), Electrical aging and thermal aging tests of insulating parts

JIS C 2143-1:2011 Electrical insulating materials -- Properties of thermal endurance -- Part 1: Ageing procedures and evaluation of test results
JIS C 2143-1:2015 Electrical insulating materials -- Thermal endurance properties -- Part 1: Ageing procedures and evaluation of test results
JIS C 3660-1-2:2003 Common test methods for insulating and sheathing materials of electric and optical cables -- Part 1-2: Methods for general application -- Thermal ageing methods
JIS C 3660-1-2:1998 Common test methods for insulating and sheathing materials of electric cables -- Part 1: Methods for general application -- Section 2: Thermal ageing methods
JIS C 2143-4-2:2014 Electrical insulating materials -- Thermal endurance properties -- Part 4-2: Ageing ovens -- Precision ovens for use up to 300 degree C
JIS C 3660-4-2:1998 Common test methods for insulating and sheathing materials of electric cables -- Part 4: Methods specific to polyethylene and polypropylene compounds -- Section 2: Elongation at break after pre-conditioning -- Wrapping test after pre-conditioning -- Wrapp
JIS C 3660-4-1:1998 Common test methods for insulating and sheathing materials of electric cables -- Part 4: Methods specific to polyethylene and polypropylene compounds -- Section 1: Resistance to environmental stress cracking -- Wrapping test after thermal ageing in air --

IN-BIS, Electrical aging and thermal aging tests of insulating parts

IS 12177-1987

Institute of Electrical and Electronics Engineers (IEEE), Electrical aging and thermal aging tests of insulating parts

IEEE 775-1993 Guide for designing multistress aging tests of electrical insulation in a radiation environment
IEEE Std 775-1993 IEEE Guide for Designing Multistress Aging Tests of Electrical Insulation in a Radiation Environment
ANSI/IEEE Std 943-1986 IEEE Guide for Aging Mechanisms and Diagnostic Procedures in Evaluating Electrical Insulation Systems

Danish Standards Foundation, Electrical aging and thermal aging tests of insulating parts

DS/EN 60216-1:2002 Electrical insulating materials - Properties of thermal endurance - Part 1: Ageing procedures and evaluation of test results
DS/EN 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
DS/EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
DS/IEC 216-1:1991 Guide for the determination of thermal endurance properties of electrical insulating materials. Part 1: General guidelines for ageing procedures and evaluation of test results
DS/EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
DS/EN 60450:2004 Measurement of the average viscometric degree of polymerisation of new and aged cellulosic electrically insulating materials
DS/IEC 216-4:1982 Guide for the determination of thermal endurance properties of electrical insulating materials. Part 4: Instruction for calculating the thermal endurance profile
DS/EN 60216-4-2:2001 Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C
DS/EN 60811-510:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air
DS/EN 12697-45:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test
DS/EN 60931-2:1997 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 2: Ageing test and destruction test
DS/EN 60811-410:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
DS/IEC 811-4-2:1991 Common test methods for insulating and sheething materials of electric cables. Part 4: Methods specific to polyethylene and polypropylene compounds. Section two: Elongation at break after pre-conditioning. Wrapping test after pre-conditioning. Wrappi

CENELEC - European Committee for Electrotechnical Standardization, Electrical aging and thermal aging tests of insulating parts

EN 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
EN 60216-1:2001 Electrical Insulating Materials - Properties of Thermal Endurance Part 1: Ageing Procedures and Evaluation of Test Results
EN 60811-1-2:1995 Insulating and Sheathing Materials of Electric Cables Common Test Methods Part 1: General Application Section 2: Thermal Ageing Methods
EN 60811-4-1:1995 Insulating and Sheathing Materials of Electric Cables Common Test Methods Part 4: Methods Specific to Polyethylene and Polypropylene Compounds Section 1: Resistance to Environmental Stress Cracking - Wrapping Test After Thermal Ageing in Air - Measurement
EN 60811-510:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air
EN 60811-410:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors

ES-UNE, Electrical aging and thermal aging tests of insulating parts

UNE-EN 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results (Endorsed by AENOR in October of 2013.)
UNE-EN 60811-401:2012/A1:2018 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
UNE-HD 60364-7-718:2014/A12:2018 Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
UNE-EN 60811-410:2012/A1:2018 Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors

Lithuanian Standards Office , Electrical aging and thermal aging tests of insulating parts

LST EN 60216-1-2013 Electrical insulating materials - Thermal endurance properties -- Part 1: Ageing procedures and evaluation of test results (IEC 60216-1:2013)
LST EN 60216-1-2002 Electrical insulating materials. Properties of thermal endurance. Part 1: Ageing procedures and evaluation of test results (IEC 60216-1:2001)
LST EN 60811-412-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb (IEC 60811-412:2012)
LST EN 60811-401-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven (IEC 60811-401:2012)
LST EN 12697-45-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test

VN-TCVN, Electrical aging and thermal aging tests of insulating parts

TCVN 6614-1-2-2008 Common test methods for insulating and sheathing materials of electric cables and optical cables.Part 1-2: Methods for general application.Thermal ageing methods

AENOR, Electrical aging and thermal aging tests of insulating parts

UNE-EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
UNE-EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
UNE-EN 60216-4-2:2001 Electrical insulating materials - Thermal endurance properties -- Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C.
UNE-EN 60811-510:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air
UNE-EN 12697-45:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test
UNE-EN 60034-18-22:2003 Rotating electrical machines -- Part 18-22: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Classification of changes and insulation component substitutions
UNE-EN 60811-410:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors

European Committee for Electrotechnical Standardization（CENELEC）, Electrical aging and thermal aging tests of insulating parts

EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
HD 611.1 S1-1992 Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 1: General Guidelines for Ageing Procedures and Evaluation of Test Results
EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
HD 505.1.2 S1-1988 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General Application Section Two - Thermal Ageing Methods
EN 60450:2004 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (Incorporates Amendment A1: 2007)
HD 505.1.2 S2-1991 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General Application Section Two - Thermal Ageing Methods
EN 60216-4-2:2000 Electrical Insulating Materials - Thermal Endurance Properties Part 4-2: Ageing Ovens - Precision Ovens for Use up to 300 Degrees Celsius
HD 385 S2-1986 Test Methods for Insulations and Sheaths of Electric Cables and Cords (Elastomeric and Thermoplastic Compounds)
EN 60191-6-16:2007 Mechanical standardization of semiconductor devices - Part 6-16: Glossary of semiconductor tests and burn-in sockets for BGA, LGA, FBGA and FLGA
HD 505.4.1 S2-1990 Common Test Methods- Insulating/Sheathing Materials Electric Cables Part 4: Methods Polyethylene/ Polypropylene Compounds Sec 1-Resistance Environmental Stress- Cracking/Wrapping Test After Thermal Ageing in Air-Measurement of Melt Flow Index-Carbon Black
EN 60512-9-4:2011 Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing)
HD 505.4.2 S1-1992 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 4: Methods Specific to Polyethylene and Polypropylene Compounds Section Two - Elongation at Break After Pre-Conditioning - Wrapping Test After Thermal Ageing in Air - Measu

ZA-SANS, Electrical aging and thermal aging tests of insulating parts

SANS 6284-5:2007 Test methods for cross-linked polyethylene (XLPE) insulated electric cables Part 5: Ageing tests
SANS 60811-1-2:1985 Common test methods for insulating and sheathing materials of electric and optical cables Part 1: Methods for general application Section 2: Thermal ageing methods
SANS 60811-4-2:2004 Insulating and sheathing materials of electric and optical cables - Common test methods Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping

BE-NBN, Electrical aging and thermal aging tests of insulating parts

NBN C 30-811-1-2-1992 COMMON TEST METHODS FOR INSULATING AND SHEATING MATERIALS OF ELECTRIC CABLES Part 1 : Methods for general application Section Two - Thermal ageing methods
NBN C 30-811-2-1-1992 COMMON TEST METHODS FOR INSULATING AND SHEATING MATERIALS OF ELECTRIC CABLES Part 2 : Methods specific to elastomeric compounds Section One - Ozone resistance test - Hot set test - Mineral oil immersion test
NBN-EN 60931-2-1994 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V Part 2 : Ageing test and destruction test

SE-SIS, Electrical aging and thermal aging tests of insulating parts

SIS SS IEC 450:1983 Measurement ofthe average viscometric degree of polymerization of new and aged electrical papers

CZ-CSN, Electrical aging and thermal aging tests of insulating parts

CSN 34 6422-1961 Tests of thermal aging of varnished wires on basis of decrease of electric strength of lacquer film
CSN 35 4055 Cast.26-1984 Electromechanical components for electronic equipment. Durability of contact retention system and seals /maintenance, ageing/ test

ES-AENOR, Electrical aging and thermal aging tests of insulating parts

Standard Association of Australia （SAA）, Electrical aging and thermal aging tests of insulating parts

AS 1683.26:2001 Methods of test for elastomers - Rubber, vulcanizedor thermoplastic - Accelerated ageing and heat resistance tests

German Institute for Standardization, Electrical aging and thermal aging tests of insulating parts

DIN EN 60450:2008 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (IEC 60450:2004 + A1:2007); German version EN 60450:2004 + A1:2007
DIN EN 60216-4-2:2001 Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens; Precision ovens for use up to 300 °C (IEC 60216-4-2:2000); German version EN 60216-4-2:2000
DIN EN 60216-1:2014 Electrical insulating materials.Thermal endurance properties.Part 1: Ageing procedures and evaluation of test results (IEC 60216-1:2013); German version EN 60216-1:2013
DIN EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven (IEC 60811-401:2012); German version EN 60811-401:2012
DIN EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb (IEC 60811-412:2012); German version EN 60811-412:2012
DIN IEC/TS 62332-2:2014 Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 2: Simplified test (IEC/TS 62332-2:2014)
DIN EN 61074:1994-07 Methods of test for the determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry (IEC 61074:1991); German version EN 61074:1993
DIN EN 12697-45:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test; German version EN 12697-45:2012
DIN EN 2591-218:2003 Aerospace series - Elements of electrical and optical connection; Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling; German and English version EN 2591-218:2002
DIN 44874-3:1980 Electrical metal sheated tubular heating elements; 6,5 mm and 8,5 mm diameter, determination of ageing and overload characteristics
DIN EN 60191-6-16:2007 Mechanical standardization of semiconductor devices - Part 6-16: Glossary of semiconductor tests and burn-in sockets for BGA, LGA, FBGA and FLGA (IEC 60191-6-16:2007); German version EN 60191-6-16:2007

Taiwan Provincial Standard of the People's Republic of China, Electrical aging and thermal aging tests of insulating parts

CNS 14952-1-2005 Guide for the determination of thermal endurance properties of electrical insulating materials - Part 1: General guidelines for ageing procedure and evaluation of test results

European Committee for Standardization (CEN), Electrical aging and thermal aging tests of insulating parts

HD 611.4.1 S1-1992 Guide for the determination of thermal endurance properties of electrical insulating materials; part 4: ageing ovens; section 1: single-chamber ovens (IEC 216-4-1:1990)
EN 1367-1:2007 Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing
EN 1367-1:1999 Tests for Thermal and Weathering Properties of Aggregates - Part 1: Determination of Resistance to Freezing and Thawing
prEN ISO 18393-1 Thermal insulation products - Determination of ageing by settlement - Part 1: Blown loose fill insulation for ventilated attics simulating humidity and temperature cycling (ISO/DIS 18393-1:2022)
EN 2591-220:2005 Aerospace series - Elements of electrical and optical connection - Test methods - Part 220: Contact/conductor joint ageing by current and temperature cycling
EN 3745-401:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 401: Accelerated ageing
EN 2591-218:2002 Aerospace series - Elements of electrical and optical connection; Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling
prEN 60831-2-1992 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V; part 2: ageing test, self-healing test and destruction test (IEC 831-2:1988 + A1:1991 + IEC/DIS 33(Central 0ffice)103, modified)

Indonesia Standards, Electrical aging and thermal aging tests of insulating parts

SNI 04-6190.1.2-2001 Common test methods for insulating and sheathing materials of electric cables. Part 1: Methods for general application - Section 2: Thermal ageing methods
SNI 04-6190.4.1-1999

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Electrical aging and thermal aging tests of insulating parts

JEDEC JEP163-2015 Selection of Burn-In/Life Test Conditions and Critical Parameters for QML Microcircuits

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Electrical aging and thermal aging tests of insulating parts

GB/T 22578.2-2017 Electrical insulation system(EIS)—Thermal evaluation of combined liquid and solid components—Part 2: Simplified test

Society of Automotive Engineers (SAE), Electrical aging and thermal aging tests of insulating parts

SAE AMS4965K-2011 Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al 4.0V Solution Heat Treated and Aged
SAE AMS4965L-2014 Titanium Alloy, Bars, Wire, Forgings, and Rings, 6.0AI - 4.0V, Solution Heat Treated and Aged
SAE AMS4983D-2007 Titanium Alloy, Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Aged 180 ksi (1241 MPa) Tensile Strength
SAE AMS4984D-2007 Titanium Alloy Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Solution Heat Treated and Aged 173 ksi (1193 MPa) Tensile Strength UNS R56410
SAE AMS4987C-2007 Titanium Alloy, Forgings 10V - 2Fe - 3AI Consumable Electrode Melted, Single Solution Heat Treated and Overaged 140 ksi (965 MPa) Tensile Strength
SAE AMS4987D-2011 Titanium Alloy, Forgings 10V 2Fe 3Al, Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged, 140 ksi (965 MPa) Tensile Strength
SAE AMS4983E-2011 Titanium Alloy, Forgings 10V-2Fe-3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Aged, 180 ksi (1241 MPa) Tensile Strength
SAE AMS4986C-2007 Titanium Alloy, Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged 160 ksi (1103 MPa) Tensile Strength
SAE AMS4984E-2011 Titanium Alloy Forgings 10V 2Fe 3Al Consumable Electrode Melted, Solution Heat Treated and Aged, 173 ksi (1193 MPa) Tensile Strength

Professional Standard - Nuclear Industry, Electrical aging and thermal aging tests of insulating parts

EJ/T 820-1994 Regulation and Selection of Accelerated Aging Test Procedures for Quality Appraisal of Electrical Items in Nuclear Power Plant Safety System

European Association of Aerospace Industries, Electrical aging and thermal aging tests of insulating parts

AECMA PREN 2591-220-2000 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 220: Contact/Conductor joint Ageing by Current and Temperature Cycling Edition P 1
AECMA PREN 2591-B18-1993 Aerospace Series Elements in Electrical and Optical Connection Test Methods Part B18 - Current Cycling for Lugs and in-Line Splices

GOSTR, Electrical aging and thermal aging tests of insulating parts

GOST IEC 60811-3-2-2011 Test methods specific to PVC insulating and sheathing compounds of electric and optical cables. Loss of mass test. Thermal stability test

Aerospace, Security and Defence Industries Association of Europe (ASD), Electrical aging and thermal aging tests of insulating parts

ASD-STAN PREN 2591-220-2000 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 220: Contact/Conductor joint Ageing by Current and Temperature Cycling (Edition P 1)
ASD-STAN PREN 2591-218-1995 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 218: Ageing of Terminal Lugs and In-Line Splices by Temperature and Current Cycling (Edition P 1)
ASD-STAN PREN 2591-D7-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part D7 - Durability of Contact Retention System and Seals (Maintenance Ageing) (Issue P 1)