ZH
RU
ES

Ion concentration meter

Ion concentration meter, Total:463 items.

In the international standard classification, Ion concentration meter involves: Geology. Meteorology. Hydrology, Construction materials, Non-metalliferous minerals, Farming and forestry, Pesticides and other agrochemicals, Adhesives, Photography, Meat, meat products and other animal produce, Air quality, Testing of metals, Paints and varnishes, Laboratory medicine, Optics and optical measurements, Semiconducting materials, Chipless working equipment, Body care equipment, Wood-based panels, Power stations in general, Products of the chemical industry, Aerospace fluid systems and components, Water quality, Pulps, Astronomy. Geodesy. Geography, Pharmaceutics, Analytical chemistry, Wastes, Paper and board, Products of the textile industry, Nuclear energy engineering, Vocabularies, Environmental testing, Metrology and measurement in general, Semiconductor devices, Beverages, Radiation measurements, Radiation protection, Coals, Road engineering, Particle size analysis. Sieving, Metalliferous minerals, Measurement of volume, mass, density, viscosity, Equipment for processing of minerals, Welding, brazing and soldering, Measurement of fluid flow, Mining and quarrying, Electricity. Magnetism. Electrical and magnetic measurements, Medical equipment, Protection against fire, Electromechanical components for electronic and telecommunications equipment, Electrical engineering in general, Electrical wires and cables, Installations in buildings, AIRCRAFT AND SPACE VEHICLE ENGINEERING, Non-ferrous metals, Lamps and related equipment, Linear and angular measurements, Test conditions and procedures in general, Inorganic chemicals, Insulating fluids, Tobacco, tobacco products and related equipment, On-board equipment and instruments, Law. Administration, Miscellaneous domestic and commercial equipment, Hydraulic energy engineering, Organic chemicals, Plastics, Surface treatment and coating, Fuels, Fruits. Vegetables, Biology. Botany. Zoology, Thermodynamics and temperature measurements, Paint ingredients, Elements of buildings, Electronic tubes, Lubricants, industrial oils and related products, Waxes, bituminous materials and other petroleum products, Electronic display devices, Optoelectronics. Laser equipment.

中国气象局, Ion concentration meter

QX/T 380-2017 Air negative (oxygen) ion concentration level
QX/T 509-2019 GRIMM 180 Particulate Matter Concentration Monitor Calibration Specifications
QX/T 475-2019 Technical requirements for air negative ion automatic measuring instrument capacitive inhalation method

HU-MSZT, Ion concentration meter

CZ-CSN, Ion concentration meter

CSN 68 4154-1989 Concentration of the inpurities by he ion exchange method
CSN 68 1102-1980 Tlie syntheliral detergents. elevmirialion of conuentration of the ydrogen ions (pH)
CSN 65 9037-1984 Vat dyestuffs. Metods of determination: — point of congelation — stability at centrifuging — concentration of hydrogen ions [pH - value)
CSN 64 0905-1989 Plastics. Ion exchangers. Determination of apparent density

Professional Standard - Building Materials, Ion concentration meter

JC/T 2110-2012 Indoor air ion concentration test method
JC/T 781-1989 Test method for delamination strength of honeycomb type core
JC/T 781-2006 Test method for delamiation strength of honeycomb core

Group Standards of the People's Republic of China, Ion concentration meter

T/CMSA 0029-2022 Air negative oxygen ion concentration level icon
T/GIEHA 012-2019 Indoor environmental ecological negative (oxygen) ion concentration level
T/SZJL 4-2023 Determination of glucose concentration in human saliva－Ion chromatography
T/QGCML 018-2020 Negative ion emitter
T/CAQI 202-2021 Air ion detector
T/CAIA YQ006-2018 Performance testing method of Ion chromatography
T/CASAS 010-2019 Determination of Trace Impurities Concentration and Distribution in GaN Materials by Secondary Ion Mass Spectrometry
T/WJZZ 009-2021 Whole measurement calibration method of particle number concentration measuring instrument
T/AHFIA 042-2019 Determination of water-soluble potassium in cellar mud of nongxiangxing baijiu by ion chromatography
T/CASAS 009-2019 Determination of Trace Impurities Concentration and Distribution in Semi-insulating SiC Materials by Secondary Ion Mass Spectrometry
T/CMSA 0024-2021 Air negative ion measuring instrument performance test specification
T/SSM 5-2022 Calibration specifications for particle number concentration measuring instruments used in motor vehicle emissions
T/CWAN 0036-2021 CNC high precision plasma cutting machine
T/BEA 43002-2023 Calibration Specification for Single Langmuir Probe Plasma Instrument
T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
T/CBMMAS 11-2020 Technical requirements for bioaerosol particle concentrationmonitoring in ship cabin
T/IAWBS 003-2017 Determination of Carrier Concentration in SiC Epitaxial Layer_Mercury Probe Capacitance-Voltage Method
T/CIMA 0023-2020 Technical requirements for vehicle-mounted inductively coupled plasma quadrupole mass spectrometer
T/ZZB 1574-2020 Portable explosion-proof analyzer for volatile organic gas (hydrogen flame ionization detector)

RU-GOST R, Ion concentration meter

GOST 19609.19-1989 Concentrated kaolin. Method for determination of hydrogen ions concentration of water suspension
GOST 17818.6-1990 Graphite. Method for determination of hydrogen ions concentration of water suspension and water extract
GOST 25183.9-1982 Photographic gelatine. Method of determination of hydrogen ions concentration
GOST 24892-1981 Organic cationic dyes. Determinations of concentrations of shade
GOST 3594.5-1977 Moulding clay. Method for the determination of hydrogen ion concentration of water extract
GOST 22567.5-1993 Synthetic detergents and surfactants. Methods for determination of hydrogen ions concentration
GOST 29234.6-1991 Moulding sands. Methods for determination of water extract hydrodgen ions concentration (pH)
GOST 22567.5-1977 Synthetic detergents. Method for determination of ph
GOST 23409.22-1978 Moulding sands and sand mixtures. Method for determination of water extract hydrogen ions concentration
GOST 25645.146-1989 Earth's ionosphere. Model of global distribution of concentration, temperature and effective collision frequency of electrons
GOST R 25645.158-1994 Earth's uppermost ionosphere. Model of distribution of the concentration of electrons in the flat of geomagnetic equator
GOST R 50729-1995 Textiles. Limit permissible concentration of free formaldehyde
GOST 19728.18-2001 Talc and talcomagnesite. Method for determination of hydrogen ions concentration (pH) of water suspension and water extract
GOST 19728.18-1988 Talc and talcomagnesite. Method for determination of hydrogen ions concentration of water suspension and water extract
GOST R ISO 25140-2017 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection
GOST 30386-1995 Textiles. Maximum permissible concentrations of free formaldehyde
GOST R 55761-2013 Batches, sugar mash, brew from food raw material. Determination mass concentration of cations, anions of non-organic and organic acids content by capillary electrophoresis method
GOST R 8.845-2013 State system for ensuring the uniformity of measurements. Air ion composition measurements. Method of measuring volume density of electric charge of air and air ion concentration using aspiration capacitor
GOST R 51821-2001 Vodkas and special vodkas. Ion chromatography method of determination of potassium, sodium, ammonium, calcium, magnesium, strontium cations and fluorides, chlorides, nitrates, nitrites, phosphates and sulphates anions mass concentration
GOST 29232-1991 Anionic and non-ionic surface active agents. Determination of the critical micellization concentration. Method by measuring surface tension with a plate, stirrup or ring
GOST 13005-1967 Interferometers for determination of liqnid and gas concentration. Methods and means for verification
GOST R 25645.157-1994 Earth's lower ionosphere. Model of global distribution of concentration and effective collision frequency of electrons for VLE-LF radio foreacast
GOST 27403-1987 Vat dyes. Determination of freezing point, centrifuging fastness and value of hydrogen ion concentration (pH)
GOST IEC 60754-3-2021 Test on gases evolved during combustion of materials from cables. Part 3. Measurement of low level of halogen content by ion chromatography
GOST 5365-1983 Electrical measuring instruments. Dials and scales. General technical requirements
GOST R 51655-2000 Alcohol products and raw material for it's production. Method for determination of free and total sulphurous acid mass concentration
GOST 20271.1-1991 Microwave electronic devices. Methods of measuring electrical parameters
GOST R 52666-2006 Lubricating oils. Determination of barium, calcium, magnesium and zinc concentrations by atomic absorption spectrometry method
GOST EN 237-2013 Liquid petroleum products. Determination of low lead concentrations by atomic absorption spectrometry

Hubei Provincial Standard of the People's Republic of China, Ion concentration meter

DB42/T 1198-2016 Concentration levels of air negative oxygen ions in Hubei Province
DB42/T 1914-2022 Technical specifications for monitoring the concentration of negative oxygen ions in forest environment

Professional Standard - Forestry, Ion concentration meter

LY/T 2586-2016 Specification on observation on air negative oxygen ion concentration
LY/T 2587-2016 Specification on station construction for monitoring air negative oxygen ion concentration

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Ion concentration meter

GB/T 3776.2-1983 Method of hydrogen ion concentration determination for pesticide emulsifiers
GB/T 8757-1988 Determination of carrier concentration in gallium arsenide by the plasma resonance minimum
GB/T 8757-2006 Determination of carrier concentration in gallium arsenide by the plasma resonance minimum
GB/T 11276-1989 Cationic surface active agents(hydrochlorides and hydrobromides)--Determination of critical micellization concentration--Method by measurement of counter ion activity
GB/T 11278-1989 Anionic and non-ionic surface active agents--Determination of the critical micellization concentration--Method by measuring surface tension with ring
GB/T 15434-1995 Ambient air--Determination of the mass concentration of fluoride--Method by filter sampling and fluorine ion- selective electrode analysis
GB/T 20176-2006 Surface chemical analysis.Secondary-ion mass spectrometry.Determination of boron atomic concentration in silicon using uniformly doped materials
GB/T 18809-2002 General specification for air ion measuring instruments
GB/T 36244-2018 Inductively coupled plasma atomic emission spectrometer
GB 11848.6-1989 Determination of Fluorine in Uranium Ore Concentrates by Ion Selective Electrode Method
GB/T 11848.6-1989 Determination of fluoride in uranium ore concentrate by ion-selective electrode
GB/T 15818-1995 Testing method for biodegradability of anionic and nonionic surfactants
GB/T 6587.2-1986 Temperature tests for electronic measuring instruments
GB/T 6587.3-1986 Humidity tests for electronic measuring instruments
GB/T 6167.2-1985 Methods for testing the performance of dust particle counter--Particle concentration
GB/T 25186-2010 Surface chemical analysis.Secondary-ion mass spectrometry.Determination of relative sensitivity factors from ion-implanted reference materials
GB/T 36705-2018 Test method for carrier concentration of gallium nitride substrates—Raman spectrum method
GB/T 11068-1989 Gallium arsenide epitaxial layer--Determination of carrier concentration--Voltage-capacitance method
GB/T 14146-1993 Silicon epitaxial layers--Determination of carrier concentration--Mercury probe Valtage-capacitance method
GB/T 11068-2006 Gallium arsenide epitaxial layer.Determination of carrier concentration voltage-capacitance method
GB/T 14146-2009 Silicon epitaxial layers-determination of carrier concentration-mercury probe voltages-capacitance method
GB 11068-1989 GaAs Epitaxial Layer Carrier Concentration Capacitance-Voltage Measurement Method
GB/T 42732-2023 Size Distribution and Concentration Measurement of Inorganic Nanoparticles in Aqueous Phases in Nanotechnology by Single Particle Inductively Coupled Plasma Mass Spectrometry
GB/T 8331-1987 Method for the determination of bulk density for ion exchange resins in wet state
GB/T 8330-2008 Determination of specific gravity of ion exchange resins in wet state
GB/T 8331-2008 Determination of bulk density of ion exchange resins in wet state
GB/T 8330-1987 Method for the determination of true density of ion exchange resins in wet state
GB/T 2399-2014 Cationic dyes.Determination of dyeing shade and relative strength
GB/T 2399-2003 Cationic dyes-Determination of dyeing shade and relative strength
GB/T 8331-2008(英文版) Determination of bulk density of ion exchange resins in wet state
GB/T 21006-2007 Surface chemical analysis.X-ray photoelectron and Auger electron spectrometers.Linearity of intensity scale
GB/T 17593-1998 Textiles--Test method of heavy metal ions--Atomic absorption spectrophotometry

American Society for Testing and Materials (ASTM), Ion concentration meter

ASTM D1583-01(2008) Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D1583-01(2018) Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D1583-01 Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D1583-00 Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D1583-01(2013) Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM F862-11(2017) Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
ASTM D3561-11 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
ASTM F862-93(1998) Standard Test Method for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
ASTM F862-93(2002) Standard Test Method for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
ASTM F862-11(2022) Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
ASTM F862-11 Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
ASTM D778-97(2007) Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot-Extraction and Cold-Extraction Procedures)
ASTM C1625-19 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
ASTM D778-97(2002) Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot- Extraction and Cold-Extraction Procedures)
ASTM D778-97 Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot- Extraction and Cold-Extraction Procedures)
ASTM F398-92(1997) Standard Test Method for Majority Carrier Concentration in Semiconductors by Measurement of Wavenumber or Wavelength of the Plasma Resonance Minimum
ASTM D7512-09 Standard Guide for Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical Instrumentation
ASTM E1413-06 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM C1625-05 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
ASTM D5542-04 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM D5542-04(2009) Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM E1832-08 Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer
ASTM E1832-08(2017) Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer
ASTM C1625-12 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
ASTM D3561-16 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
ASTM D5542-94(1999)e1 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM D5542-16 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM D5996-05 Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
ASTM E1479-16 Standard Practice for Describing and Specifying Inductively Coupled Plasma Atomic Emission Spectrometers
ASTM D4519-94(2005) Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
ASTM D4519-16 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
ASTM E611-92 Test Methods for Low Concentrations of Diethylene Glycol in Ethylene Glycol by Gas Chromatography
ASTM D4519-94(1999)e1 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
ASTM D8049-17 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D5996-05(2009) Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
ASTM D3624-85a(2005) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D3718-85a(2005) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM D3717-85a(2005) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D3624-85a(2010) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D3717-85a(2010) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D3718-85a(2010) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM E1413-07 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM E2330-19 Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons
ASTM D8049-16 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer

Professional Standard - Agriculture, Ion concentration meter

GB 3776.2-1983 Method for Determination of Hydrogen Ion Concentration of Pesticide Emulsifier
JJG(教委) 020-1996 Verification Regulations for Ion Chromatography
JJG(教委) 015-1996 Verification Regulations for Inductively Coupled Plasma Atomic Emission Spectrometer

CH-SNV, Ion concentration meter

VSM 23745.2-1967

National Metrological Verification Regulations of the People's Republic of China, Ion concentration meter

JJG 846-2015 Dust Concentration Measuring Instruments
JJG 823-1993 Verification Regulation for Ion Chromatograph
JJG 823-2014 Verification Regulation for Ion Chromatograph
JJG(地质) 1008-1990 Verification Regulations for Ion Chromatography
JJG 950-2000 Verification Regulation of Oil Content in Water Analyzers
JJG 950-2012 Verification Regulation of Analyzers for Oil Content in Water
JJG 155-2020 Chloride ion diffusion coefficient tester
JJG 1089-2013 Osmometers
JJG(交通) 115-2014 Tester for Separating Emulsified Bitumen Particle Ions
JJG 134-2017 Concrete Chloride Ion Content Rapid Tester
JJG(煤炭) 08-1996 Verification Regulation of Direct Reading Mine Dust Concentration Measuring Instrument
JJG(交通) 068-2006 Verification Regulation of Nuclear Density and Moisture Gage
JJG(地质) 1015-1990 Verification regulations for inductively coupled plasma direct reading spectrometer
JJG(铁道) 128-1991 Verification Regulations for Nucleon Humidity and Density Tester (Trial)
JJG(铁道) 150-1994 Verification Regulation of Optical Instrument for the Height and off Center Deviation of Contact Wire
JJG 1023-2007 Testing Instrument for Density and Moisture with Nuclear Radiation Method

Association of German Mechanical Engineers, Ion concentration meter

VDI 2452 Blatt 1-1978 Air pollution measurement; measurement of total fluoride ion concentration; impinger method
VDI 2452 Blatt 2-1975 Gaseous air pollution measurement; determination of fluoric ion concentration; preseparation and electrometric detection
VDI 3481 Blatt 4-2007 Gaseous emission measurement - Measurement of the concentrations of total organic carbon and methane carbon using the flame ionisation detector (FID)
VDI 2459 Blatt 1-2000 Gaseous emission measurement - Determination of carbon monoxide concentration using flame ionisation detection after reduction to methane
VDI 2452 Blatt 3-1987 Gaseous air pollution measurement; measurement of fluoride ion concentration; sorption method with prepared silver balls and heated membrane filter

GOSTR, Ion concentration meter

GOST R 59016-2020 Mineral natural drinking waters. Determination of the mass concentration of bromide ions by the photometric method

Professional Standard - Urban Construction, Ion concentration meter

CJ/T 524-2018 Odorant Concentration Monitor

国家市场监督管理总局、中国国家标准化管理委员会, Ion concentration meter

GB/T 36240-2018 Ion chromatographs
GB/T 18809-2019 General specification for air ion measuring instruments
GB/T 40129-2021 Surface chemical analysis—Secondary ion mass spectrometry—Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
GB/T 14146-2021 Test method for carrier concentration of silicon epitaxial layers—Capacitance-voltage method
GB/T 38165-2019 Detection of circulating cell-free DNA concentration in human peripheral blood—Real-time PCR method based on Alu sequence

European Committee for Standardization (CEN), Ion concentration meter

EN 13205:2001 Workplace Atmospheres - Assessment of Performance of Instruments for Measurement of Airborne Particle Concentrations
EN ISO 19448:2018 Dentistry - Analysis of Fluoride Concentration in Aqueous Solutions by use of Fluoride-Ion Selective Electrode
EN ISO 13161:2020 Water quality - Polonium 210 - Test method using alpha spectrometry (ISO 13161:2020)
EN ISO 13161:2015 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry
CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
EN 12619:1999 Stationary Source Emissions - Determination of the Mass Concentration of Total Gaseous Organic Carbon at Low Concentrations in Flue Gases - Continuous Flame Ionization Detector Method
PD CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
PD CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
PD CEN/TS 16976:2016 Ambient air - Determination of the particle number concentration of atmospheric aerosol
PD CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
prEN 237-1985 Liquid petroleum products; determination of low lead concentrations; atomic absorption spectrometric methode
EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters

Professional Standard - Electron, Ion concentration meter

SJ/T 11493-2015 Test method for measuring nitrogen concentration in silicon substrates by secondary ion mass spectrometry
SJ/T 11498-2015 Test method for measuring oxygen contamination in heavily doped silicon substrates by secondary ion mass spectrometry
SJ 2757-1987 Method of measurement by infra-red reflection for charge carrier concentraiton of heavily doped semiconductors
SJ/T 10925-1996 Methods for calculation of concentration and modulus of potassium silicate solution for use in electronic industry
SJ 1152-1977 Specification for electronic temperature meters for cereal grains

Association Francaise de Normalisation, Ion concentration meter

NF ISO 11632:1998 Émission de sources fixes - Détermination de la concentration en masse de dioxyde de soufre - Méthode par chromatographie ionique.
NF EN 15763:2010 Produits alimentaires - Dosage des éléments traces - Dosage de l'arsenic, du cadmium, du mercure et du plomb par spectrométrie d'émission avec plasma induit par haute fréquence et spectromètre de masse (ICP-MS) après digestion sous pression
NF EN ISO 25140:2010 Émissions de sources fixes - Méthode automatique pour la détermination de la concentration en méthane par détection à ionisation de flamme (FID)
NF EN ISO 19448:2018 Médecine bucco-dentaire - Analyse de la concentration en fluorure dans les solutions aqueuses en utilisant une électrode sélective d'ions fluorures
NF X21-070*NF ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials.
NF T73-411:1980 Anionic and non-ionic surface active agents. Determination of the critical micellization concentration. Method by measuring surface tension with a plate, stirrup or ring.
NF S91-275*NF EN ISO 19448:2018 Dentistry - Analysis of fluoride concentration in aqueous solutions by use of fluoride-ion selective electrode
NF EN 12619:2013 Émissions de sources fixes - Détermination de la concentration massique en carbone organique total - Méthode du détecteur continu à ionisation de flamme
NF T73-414:1983 Surface active agents. Cationic surface active agents (hydrochlorides and hydrobromides). Determination of critical micellization concentration. Method by measurement of counter ion activity.
NF X43-353*NF EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID).
XP T16-401*XP CEN ISO/TS 19590:2019 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
NF X43-338*NF ISO 11632:1998 Stationary source emissions. Determination of the mass concentration of sulfur dioxide. Ion chromatography method.
XP CEN/TS 17021:2018 Émissions de sources fixes - Détermination de la concentration massique en dioxyde de soufre par des techniques instrumentales
NF M60-805-2:2003 Nuclear energy - Measurement of radioactivity in the environment - Water - Part 2 : measurement of the concentration of uranium in water by inductively coupled plasma atomic emission spectroscopy.
NF B56-017:1980 Panneaux fibragglo - Détermination de la teneur en ions chlorure
NF EN ISO 10304-4:2022 Qualité de l'eau - Dosage des anions dissous par chromatographie des ions en phase liquide - Partie 4 : dosage des ions chlorate, chlorure et chlorite dans des eaux faiblement contaminées
FD X43-711-2*FD CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2 : evaluating airborne particle concentrations using Optical Particle Counters
XP X43-043*XP CEN/TS 17021:2018 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
NF EN 16476:2014 Produits pétroliers liquides - Détermination des concentrations en sodium, potassium, calcium, phosphore, cuivre et zinc dans le gazole - Méthode par spectrométrie d'émission atomique par plasma à couplage inductif (ICP OES)
XP X43-075*XP CEN/TS 16976:2016 Ambient air - Determination of the particle number concentration of atmospheric aerosol
XP CEN/TS 16976:2016 Air ambiant - Détermination de la concentration en nombre de particules de l'aérosol atmosphérique
FD X43-283-3*FD CEN/TR 13205-3:2014 Workplace exposure - Assessment of performance of instruments for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
XP X43-321:2018 Qualité de l'air - Émissions de sources fixes - Détermination de la concentration massique d'ammoniac par des techniques instrumentales
NF C19-563*NF EN IEC 61563:2021 Radiation protection instrumentation - Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs
NF EN IEC 61563:2021 Instrumentation pour la radioprotection - Equipement de mesure de la concentration d'activité des radionucléides émetteurs gamma dans les aliments
XP X43-322:2018 Air quality - Stationary source emission - Determination of the mass concentration of formaldehyde by instrumental techniques
NF ISO 920:2018 Laine - Détermination de la longueur de barbe et de la hauteur des fibres sur appareil à peignes
FD CEN/TR 16013-2:2010 Exposition au poste de travail - Guide d'utilisation des instruments à lecture directe pour la surveillance des aérosols - Partie 2 : évaluation des concentrations de particules en suspension dans l'air à l'aide de compteurs optiques de particules
NF ISO 23830:2009 Analyse chimique des surfaces - Spectrométrie de masse des ions secondaires - Répétabilité et constance de l'échelle des intensités relatives en spectrométrie statique de masse des ions secondaires
NF T30-110-2*NF EN ISO 15181-2:2007 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 2 : determination of copper-ion concentration in the extract and calculation of the release rate
NF EN ISO 15181-2:2007 Peintures et vernis - Détermination du taux de lixiviation des biocides contenus dans les peintures antisalissures - Partie 2 : détermination de la concentration ionique du cuivre dans l'extrait et calcul du taux de lixiviation
XP CEN ISO/TS 19590:2019 Nanotechnologies - Distribution granulométrique et concentration de nanoparticules inorganiques en milieu aqueux par spectrométrie de masse à plasma induit en mode particule unique
NF M07-061*NF EN 237:2005 Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry.
NF M07-061:1996 Liquid petroleum products. Petrol. Determination of low lead concentrations by atomic absorption spectrometry.

Korean Agency for Technology and Standards (KATS), Ion concentration meter

KS E ISO 12739:2007 Zinc sulfide concentrates－Determination of zinc content－Ion-exchange and EDTA titrimetric method
KS M ISO 6840:2003 Cationic surface active agents(hydrochlorides and hydrobromides)-Determination of critical micellization concentration-Method by measurement of counter ion activity
KS M ISO 6840:2013 Cationic surface active agents(hydrochlorides and hydrobromides)－Determination of critical micellization concentration－Method by measurement of counter ion activity
KS M ISO 6840-2003(2008) Cationic surface active agents(hydrochlorides and hydrobromides)－Determination of critical micellization concentration－Method by measurement of counter ion activity
KS I ISO 11632:2004 Stationary source emissions-Determination of the massconcentration of sulfur dioxide(Ion chromatography method)
KS P ISO 19448:2021 Dentistry — Analysis of fluoride concentration in aqueous solutions by use of fluoride ion-selective electrode
KS I ISO 11632:2014 Stationary source emissions — Determination of the mass concentration of sulfur dioxide(ion chromatography method)
KS I ISO 11632-2014(2019) Stationary source emissions — Determination of the mass concentration of sulfur dioxide(ion chromatography method)
KS M ISO 4311-2003(2018) Anionic and non-ionic surface active agents－Determination of the critical micellization concentration－Method by measuring surface tension with a plate, stirrup or ring
KS M ISO 4311:2003 Anionic and non-ionic surface active agents－Determination of the critical micellization concentration－Method by measuring surface tension with a plate, stirrup or ring
KS I ISO 25140-2012(2017) Stationary source emissions－Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS I ISO 25140:2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS D ISO 14237-2003(2018)
KS D ISO 14237:2003 Surface chemical analysis－Secondary-ion mass spectrometry－Determination of boron atomic concentration in silicon using uniformly doped materials
KS M ISO 2272:2007 Surface active agents－Soaps－Determination of low contents of free glycerol by molecular absorption spectrometry
KS A 4048-1995 Measurementing methods of concentration of airborne radioactive particle
KS C IEC 61034-1:2008 Measurement of smoke density of cables burning under defined conditions－Part 1：Test apparatus
KS D ISO 21270-2005(2020) Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
KS C 7619-1979(2017) Photometric measurement on mirror - condenser lamps for projector
KS C IEC 60692:2009 Nuclear instrumentation-Density gauges utilizing ionizing radiation-Definitions and test methods
KS C IEC 60692-2009(2019) Nuclear instrumentation－Density gauges utilizing ionizing radiation－Definitions and test methods
KS D ISO 18114-2005(2020) Surface chemical analysis－Secondary-ion mass spectrometry－Determination of relative sensitivity factors from ion-implanted reference materials
KS M 5985-2008 Standard test method for low concentrations of lead, cadmium and cobalt in paint by atomic absorption spectroscopy
KS M ISO 6839:2003 Anionic surface N agents-Determination of solubility in water
KS I 3205-2007 Testing methods for determination of anions in highly purified water
KS I 3205-2021 Testing methods for determination of anions in highly purified water
KS I ISO 14965:2007 Air quality－Determination of total non-methane organic compounds－Cryogenic preconcentration and direct flame ionization detection method
KS I ISO 14965:2017 Air quality－Determination of total non-methane organic compounds－Cryogenic preconcentration and direct flame ionization detection method
KS M ISO 15181-2:2008 Paints and varnishes-Determination of release rate of biocides from antifouling paints-Part 2:Determination of copper-ion concentration in the extract and calculation of the release rate
KS M ISO 15181-2:2013 Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate
KS D ISO 18114:2005 Surface chemical analysis－Secondary-ion mass spectrometry－Determination of relative sensitivity factors from ion-implanted reference materials
KS D ISO 21270:2005 Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale

Professional Standard - Electricity, Ion concentration meter

DL/T 1479-2015 Analytical method for ethanolamine in steam and water in power plant ion chromatography

International Organization for Standardization (ISO), Ion concentration meter

ISO 6840:1982 Cationic surface active agents (Hydrochlorides and hydrobromides); Determination of critical micellization concentration; Method by measurement of counter ion activity
ISO 19448:2018 Dentistry - Analysis of fluoride concentration in aqueous solutions by use of fluoride ion-selective electrode
ISO 11632:1998 Stationary source emissions - Determination of mass concentration of sulfur dioxide - Ion chromatography method
ISO 23777:2023 Pulps — Kraft liquor — Determination of hydrosulphide ion concentration using potentiometric titration
ISO 178:1975 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
ISO 17862:2013 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
ISO 178:2019 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
ISO 17862:2022 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
ISO 14237:2000 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
ISO 4311:1979 Anionic and non-ionic surface active agents; Determination of the critical micellization concentration; Method by measuring surface tension with a plate, stirrup or ring
ISO 13084:2011 Surface chemical analysis - Secondary-ion mass spectrometry - Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
ISO 27891:2015 Aerosol particle number concentration - Calibration of condensation particle counters
ISO 8299:2019 Nuclear fuel technology — Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry
ISO/TS 19590:2017 Nanotechnologies — Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
ISO 13547-1:2014 Copper, lead, zinc and nickel sulfide concentrates - Determination of arsenic - Part 1: Iron hydroxide concentration and inductively coupled plasma atomic emission spectrometric method
ISO/FDIS 16000-42 Indoor air — Part 42: Measurement of the particle number concentration by condensation particle counters
ISO 16000-42:2023 Indoor air — Part 42: Measurement of the particle number concentration by condensation particle counters
ISO 13084:2018 Surface chemical analysis — Secondary ion mass spectrometry — Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
ISO 20411:2018 Surface chemical analysis - Secondary ion mass spectrometry - Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
ISO 23920:2020 Cigarettes — Determination of ammonia in cigarette mainstream smoke with an intense smoking regime using ion chromatography
ISO 12756:1998/Amd 1:2011 Drawing and writing instruments - Ball point pens and roller ball pens - Vocabulary - Amendment 1: Viscosity of the writing fluid
ISO/DIS 19430 Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
ISO 14965:2000 Air quality - Determination of total non-methane organic compounds - Cryogenic preconcentration and direct flame ionization detection method
ISO 18114:2003 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials
ISO 18114:2021 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials
ISO 21270:2004 Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
ISO 6839:1982 Anionic surface active agents; Determination of solubility in water

BE-NBN, Ion concentration meter

NBN T 63-129-1980 Anionic and non-ionic surface active agents - Dermination of the critical micellization concentration - Method by measuring surface tension with a plate, stirrup or ring
NBN T 63-152-1983 Cationic surface active agents (hydrochlorides and hydrobromides) - Determination of critical micellization concentration - Method by measurement of counter ion activity
NBN T 63-123-1980 Surface active agents - Analysis of soaps - Determination of low contents of free glycerol - Spectrophotometric method
NBN T 63-151-1983 Anionic surface active agents - Determination of solubility in water

British Standards Institution (BSI), Ion concentration meter

BS ISO 23777:2023 Pulps. Kraft liquor. Determination of hydrosulphide ion concentrationusing potentiometric titration
BS EN ISO 19448:2018 Dentistry. Analysis of fluoride concentration in aqueous solutions by use of fluoride ion-selective electrode
BS EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
BS ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
BS ISO 17862:2022 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
20/30409963 DC BS ISO 17862. Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
BS ISO 13084:2018 Tracked Changes. Surface chemical analysis. Secondary ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
BS EN IEC 61563:2021 Radiation protection instrumentation. Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs
BS EN 13526:2002 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes - Continuous flame ionisation detector method
BS EN ISO 25140:2010 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
BS ISO 11632:1998 Stationary source emissions - Determination of mass concentration of sulfur dioxide - Ion chromatography method
BS ISO 13547-1:2014 Copper, lead, zinc and nickel sulfide concentrates. Determination of arsenic. Iron hydroxide concentration and inductively coupled plasma atomic emission spectrometric method
BS ISO 16000-42:2023 Indoor air - Measurement of the particle number concentration by condensation particle counters
BS IEC 60692:1999 Nuclear instrumentation. Density gauges utilizing ionizing radiation. Definitions and test methods
BS PD CEN/TS 17021:2017 Stationary source emissions. Determination of the mass concentration of sulphur dioxide by instrumental techniques
BS ISO 20411:2018 Surface chemical analysis. Secondary ion mass spectrometry. Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
PD IEC/TS 62743:2012 Radiation protection instrumentation. Electronic counting dosemeters for pulsed fields of ionizing radiation
BS ISO 21270:2004 Surface chemical analysis. X-ray photoelectron and Auger electron spectrometers. Linearity of intensity scale
BS ISO 27891:2015 Aerosol particle number concentration. Calibration of condensation particle counters
BS IEC 61336:1996 Nuclear instrumentation. Thickness measurement systems utilizing ionizing radiation. Definitions and test methods
BS ISO 11704:2010 Water quality - Measurement of gross alpha and beta activity concentration in non-saline water - Liquid scintillation counting method
BS PD CEN/TR 16013-2:2010 Workplace exposure — Guide for the use of direct-reading instruments for aerosol monitoring Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
23/30464870 DC BS EN 16976. Ambient air. Determination of the particle number concentration of atmospheric aerosol
BS EN 13205-4:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Laboratory performance test based on comparison of concentrations
BS EN ISO 15181-2:2007 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Determination of copper-ion concentration in the extract and calculation of the release rate
20/30409889 DC BS ISO 18114. Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative sensitivity factors from ion-implanted reference materials
21/30396033 DC BS ISO 16000-42. Indoor air - Part 42. Measurement of the particle number concentration by Condensation Particle Counters
PD CEN ISO/TS 19590:2019 Nanotechnologies. Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
BS ISO 13084:2011 Surface chemical analysis. Secondary-ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
BS ISO 18114:2021 Tracked Changes. Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative sensitivity factors from ion-implanted reference materials
PD IEC TS 62607-5-3:2020 Nanomanufacturing. Key control characteristics. Thin-film organic/nano electronic devices. Measurements of charge carrier concentration
BS IEC 61988-4-2:2012 Plasma display panels. Environmental testing methods. Panel strength

Canadian General Standards Board （CGSB), Ion concentration meter

CGSB 2.175-93-CAN/CGSB-1993 Concentrated Nonionic, Unbuilt Liquid Detergent
CGSB 1-GP-71 METH 4.7-1974 Methods of Testing Paints and Pigments Consistency Consistency of Putty by Means of Gardner Mobilometer

VN-TCVN, Ion concentration meter

TCVN 6750-2000 Stationary source emissions.Determination of mass concentration of sulfur dioxide.Ion chromatography method

IT-UNI, Ion concentration meter

UNI 7118-1972

AENOR, Ion concentration meter

UNE 77226:1999 STATIONARY SOURCE EMISSIONS. DETERMINATION OF MASS CONCENTRATION OF SULFUR DIOXIDE. ION CHROMATOGRAPHY METHOD.
UNE 55700:1982 SURFACE ACTIVE AGENTS. ANIONIC AND NON-IONIC SURFACE ACTIVE AGENTS. DETERMINATION OF THE CRITICAL MICELLIZATION CONCENTRATION. METHOD BY MEASURING SURFACE TENSION WITH A PLATE, STIRRUP OR RING
UNE 55802:1985 SURFACE ACTIVE AGENTS. CATIONIC SURFACE ACTIVE AGENTS (HYDROCHLORIDES AND HYDROBROMIDES). DETERMINATION OF CRITICAL MICELLIZATION CONCENTRATION. METHOD BY MEASUREMENT OF COUNTER ION ACTIVITY
UNE-EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
UNE-EN ISO 25140:2011 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
UNE 55725:1987 SURFACE ACTIVE AGENTS. DETERMINATION OF LOW CONCENTRATIONS OF NON-IONIC SUFACTANTS IN AQUEOUS MEDIA USING DRAGENDORFF REAGENT
UNE 35054-1:1985 FERRONIOBIUM. SPECTROPHOTOMETRIC DETERMINATION OF NIOBIUM AFTER SEPARATION ON ION EXCHANGE RESIUS
UNE 40225-2:1974 IN PERIODICAL CONTROLS OF THE ELECTRONIC EVENESS TESTER.
UNE-EN 237:2005 Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry

Danish Standards Foundation, Ion concentration meter

DS/ISO 11632:1998 Stationary source emissions - Determination of mass concentration of sulfur dioxide - Ion chromatography method
DS/EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
DS/EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
DS/EN IEC 61563:2021 Radiation protection instrumentation – Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs
DS/EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
DS/CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
DS/EN 237:2004 Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry

KR-KS, Ion concentration meter

KS P ISO 19448-2021 Dentistry — Analysis of fluoride concentration in aqueous solutions by use of fluoride ion-selective electrode
KS M ISO 4311-2003(2023) Anionic and non-ionic surface active agents－Determination of the critical micellization concentration－Method by measuring surface tension with a plate, stirrup or ring
KS D ISO 14237-2003(2023)
KS I ISO 25140-2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)

未注明发布机构, Ion concentration meter

BS ISO 11632:1998(1999) Stationary source emissions — Determination of mass concentration of sulfur dioxide — Ion chromatography method
BS ISO 21270:2004(2010) Surface chemical analysis — X - ray photoelectron and Auger electron spectrometers — Linearity of intensity scale
BS IEC 61336:1996(1999) Nuclear instrumentation — Thickness measurement systems utilizing ionizing radiation — Definitions and test methods

Professional Standard - Nuclear Industry, Ion concentration meter

EJ/T 20216-2018 Environmental radon concentration double filter membrane measuring instrument
EJ/T 904-1994 Single Photon Bone Mineral Densitometer

工业和信息化部, Ion concentration meter

JB/T 20201-2021 Vaporized hydrogen peroxide concentration detector

National Metrological Technical Specifications of the People's Republic of China, Ion concentration meter

JJF 1659-2017 Calibration Specification for PM2.5 Mass Concentration Measurement Instruments
JJF 1716-2018 Program of Pattern Evaluation of Dust Concentration Measuring Instruments
JJF 1715-2018 Program of Pattern Evaluation of Ion Chromatographs
JJF 1348-2012 Program of Pattern Evaluation of Analyzers for Oil Content in Water
JJF 1159-2006 Calibration Specification for Quadrupole Inductively Coupled Plasma Mass Spectrometers
JJF(建材)148-2018 Calibration Specification for Distillation Instruments for Determination of Chloride Content in Cement
JJF(建材) 148-2018 Specification for calibration of distiller for determination of chloride ion content in cement
JJF 1172-2007 Calibration Specification for Volatile Organic Compounds Photo Ionization Detectors

Lithuanian Standards Office , Ion concentration meter

LST EN 13205-2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
LST EN 12619-2000 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases - Continuous flame ionisation detector method
LST EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
LST EN IEC 61563:2021 Radiation protection instrumentation - Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs (IEC 61563:2019)
LST EN 13526-2002 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes - Continuous flame ionisation detector method
LST EN 237-2004 Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry

Japanese Industrial Standards Committee (JISC), Ion concentration meter

JIS K 0155:2018 Surface chemical analysis -- Secondary ion mass spectrometry -- Linearity of intensity scale in single ion counting time-flight mass analysers
JIS K 0127:1992 General rules for ion chromatographic analysis
JIS K 0143:2023 Surface chemical analysis -- Secondary-ion mass spectrometry -- Determination of boron atomic concentration in silicon using uniformly doped materials
JIS K 0143:2000 Surface chemical analysis -- Secondary ion mass spectrometry -- Determination of boron atomic concentration in silicon using uniformly doped materials
JIS K 0157:2021 Surface chemical analysis -- Secondary ion mass spectrometry -- Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
JIS K 0554:1995 Testing methods for concentration of fine particles in highly purified water
JIS Z 4512:1995 Measuring methods of concentration of airborne radioactive particle
JIS B 7996:2018 Performance evaluation test method of automated concentration monitoring instrument of dust in flue gas
JIS H 1632-3:2014 Titanium.ICP atomic emission spectrometry.Part 3: Determination of boron
JIS K 0158:2021 Surface chemical analysis -- Secondary ion mass spectrometry -- Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
JIS B 9929:2006 Standard for measuring methods of airborne ion density
JIS B 7922:2017 Electronic Wet-bulb globe temperature (WBGT) index meter
JIS K 0556:1995 Testing methods for determination of anions in highly purified water
JIS K 0163:2010 Surface chemical analysis -- Secondary-ion mass spectrometry -- Determination of relative sensitivity factors from ion-implanted reference materials

German Institute for Standardization, Ion concentration meter

DIN EN ISO 19448:2018-04 Dentistry - Analysis of Fluoride Concentration in Aqueous Solutions by use of Fluoride-Ion Selective Electrode (ISO 19448:2018); German version EN ISO 19448:2018
DIN 18723-6:1990 Field procedure for precision testing of surveying instruments; electro-optical distance measuring instruments for short ranges
DIN EN ISO 19448:2018 Dentistry - Analysis of Fluoride Concentration in Aqueous Solutions by use of Fluoride-Ion Selective Electrode (ISO 19448:2018)
DIN EN ISO 25140:2010-12 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010); German version EN ISO 25140:2010
DIN EN 12619:2013-04 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method; German version EN 12619:2013
DIN CEN/TS 17021:2017-05*DIN SPEC 33976:2017-05 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques; German version CEN/TS 17021:2017
DIN EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations; German version EN 13205:2001
DIN CEN/TS 16976:2016-11*DIN SPEC 33974:2016-11 Ambient air - Determination of the particle number concentration of atmospheric aerosol; German version CEN/TS 16976:2016
DIN EN 16976:2023-06 Ambient air - Determination of the particle number concentration of atmospheric aerosol; German and English version prEN 16976:2023 / Note: Date of issue 2023-04-28*Intended as replacement for DIN CEN/TS 16976 (2016-11).
DIN 54410:2007 Testing of ion exchangers - Determination of density
DIN 54410:1985 Testing of ion exchangers; determination of density
DIN ISO 16000-42:2022-01 Indoor air - Part 42: Measurement of the particle number concentration by Condensation Particle Counters (ISO/DIS 16000-42:2021); Text in German and English / Note: Date of issue 2021-12-10
DIN EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method; German version EN 12619:2013
DIN 54410:2007-10 Testing of ion exchangers - Determination of density
DIN IEC 61336:1999-05 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods (IEC 61336:1996)
DIN VDE 0405-2:2005 Determination of breath alcohol concentration - Part 2: Specification of evidential breath analyzers
DIN VDE 0405-1:2017 Determination of breath alcohol concentration - Part 1: Specification of evidential breath analyzers
DIN 51008-2:2001-12 Optical Emission Spectrometry (OES) - Part 2: Terms for flame and plasma systems
DIN EN 237:2004-12 Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry; German version EN 237:2004
DIN CEN ISO/TS 19590:2019-11*DIN SPEC 19286:2019-11 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry (ISO/TS 19590:2017); German version CEN ISO/TS 19590:2019
DIN EN 237:2004 Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry; German version EN 237:2004
DIN 33899-2:2014-02 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters

ES-UNE, Ion concentration meter

UNE-EN ISO 19448:2019 Dentistry - Analysis of Fluoride Concentration in Aqueous Solutions by use of Fluoride-Ion Selective Electrode (ISO 19448:2018)
UNE-EN IEC 61563:2021 Radiation protection instrumentation - Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs (Endorsed by Asociación Española de Normalización in March of 2021.)

Professional Standard - Light Industry, Ion concentration meter

QB/T 1669-1992 Canadian Standard Freeness Meter
QB/T 1663-1992 Electronic paper oil permeability tester

Shaanxi Provincial Standard of the People's Republic of China, Ion concentration meter

DB61/T 1294-2019 Determination of low-concentration sulfur dioxide in exhaust gas from stationary pollution sources Molecular sieve adsorption tube sampling-ion chromatography

CU-NC, Ion concentration meter

NC 20-06-24-1987 Medical Sciences. Electrolytic and Basic Acid Equilibrium Study. Determination of Ion Potassium Concentration. Chemical Analysis Method

TH-TISI, Ion concentration meter

TIS 1765-1999 Anionic and non.ionic surface active agents.determination of the critical micellization concentration.method by measuring surface tension with a plate, stirrup or ring
TIS 1766-1999 Anionic surface active agents.determination of solubility in water

Professional Standard - Traffic, Ion concentration meter

JT/T 658-2006 Nuclear density and moisture gauge
JT/T 923-2014 Tester for separating emulsifled bitumen particle ions
JT/T 1150-2017 Rapid measuring instrument for chloride ion of concrete

SE-SIS, Ion concentration meter

SIS SS IEC 577:1981 Nuclear instrumentation - lonizing radiation thickness meters
SIS SS IEC 692:1984 Nuclear instrumentation — Density meters utilizing ionizing radiation — Definitions and test methods
SIS SS IEC 731:1988 Medical electrical equipment — Dos/meters with ionization chambers as used in radiotherapy

Professional Standard - Construction Industry, Ion concentration meter

JG/T 261-2009 Concrete Chloride Ion Flux Meter
JG/T 262-2009 Concrete Chloride Ion Diffusion Coefficient Meter

Professional Standard - Coal, Ion concentration meter

MT 163-1997 General technical condition for direct reading instrument for dust concentration measurement
MT/T 163-1997 General technical condition for direct reading instrument for dust concentration measurement

国家煤矿安全监察局, Ion concentration meter

MT/T 163-2019 General technical conditions for direct-reading dust concentration measuring instruments

RO-ASRO, Ion concentration meter

STAS SR 13346-1996 Cationic dyestuffs in concentrated solution. Determination of stability to storage
STAS 9475/2-1974 ION EXCHANGERS Size analysis
STAS SR ISO 8322-8:1995 Bullding construction - Measuring instrumenta - Procedures for determining accuracy in use. Part 8: Electronic distance measuring instruments up to 150 m.

Professional Standard - Petroleum, Ion concentration meter

SY/T 6323-1997 Neutron logging tool calibration
SY/T 6582.4-2003 The calibration for petroleum nuclear logging tool Part 4:The calibration for compensated neutron tool
SY/T 6545-2012 Specification for calibration of the pulsed neutron logging tool
SY/T 6179-1996 Calibration Regulations for Compensated Neutron Logging Tool

ES-AENOR, Ion concentration meter

Standard Association of Australia （SAA）, Ion concentration meter

AS ISO 14237:2006 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
AS ISO 13547.1:2015 Copper, lead, zinc and nickel sulfide concentrates-Determination of arsenic, Part 1: Iron hydroxide concentration and inductively coupled plasma atomic emission spectrometric method

CEN - European Committee for Standardization, Ion concentration meter

CEN ISO/TS 19590:2019 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry

International Electrotechnical Commission (IEC), Ion concentration meter

IEC 61563:2019 Radiation protection instrumentation - Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs
IEC 61034-1:1990 Measurement of smoke density of electric cables burning under defined conditions; part 1: test apparatus
IEC 60692:1999 Nuclear instrumentation - Density gauges utilizing ionizing radiation - Definitions and test methods

AT-ON, Ion concentration meter

ONORM M 9418-2001 Automatic concentration measuring instruments for carbon monoxide in garages - Specifications and testing
ONORM M 5861-1-1993 Manual determination of particle concentrations in fluid gases - Gravimetrie method - General requirements

Professional Standard - Machinery, Ion concentration meter

JB/T 10968-2010 Vibration monitor & electron vibration switch for centrifuges and separators
JB/T 7707-1995 Test method for thickness of hard film of ion plating Ball milling method

NL-NEN, Ion concentration meter

NEN 6535-1986 Water - Calculation or estimation of the ionic strength
NEN 6674-1981 Waste water - Photometric determination of anionactive detergents

IPC - Association Connecting Electronics Industries, Ion concentration meter

IPC TR-583 CD-2002 An In-Depth Look At Ionic Cleanliness Testing
IPC TM-650 2.3.28.2-2009 Bare Printed Board Cleanliness by Ion Chromatography
IPC WP-019-2017 An Overview on Global Change in Ionic Cleanliness Requirements
IPC WP-019A-2018 An Overview on Global Change in Ionic Cleanliness Requirements
IPC WP-019A JAPANESE-2018 An Overview on Global Change in Ionic Cleanliness Requirements

BELST, Ion concentration meter

STB 17.13.05-42-2015 Еnvironmental pгоtесtion. Analitical (laboratory) control and monitoring of the environment. Water quality. Determination of sulfat-ions concentration by turbidimetric metod
STB 17.13.05-37-2015 Environmental protection and nature use. Analytical (laboratory) control and monitoring. Atmospheric air. Determination of sulphate-ion concentration in liquid matrix

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Ion concentration meter

IPC TR-583-2002 An In-Depth Look At Ionic Cleanliness Testing

European Committee for Electrotechnical Standardization（CENELEC）, Ion concentration meter

EN IEC 61563:2021 Radiation protection instrumentation - Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs

Military Standards (MIL-STD), Ion concentration meter

DOD A-A-55712-1996 METER, HYDROGEN ION TEST, 115/230 VOLTS, 50/60 HZ, AC

Shandong Provincial Standard of the People's Republic of China, Ion concentration meter

DB37/T 2418-2013 Electronic pavement material strength tester

Professional Standard - Military and Civilian Products, Ion concentration meter

WJ 2299-1995 Inductively Coupled Plasma Sequential Scanning Spectrometer Verification Regulations

Institute of Electrical and Electronics Engineers (IEEE), Ion concentration meter

IEEE 836-2001 Recommended practice for precision centrifuge testing of linear accelerometers
IEEE 836-2009 Recommended practice for precision centrifuge testing of linear accelerometers
IEEE 1227-1990 Guide for the Measurement of DC Electric-Field Strength and Ion Related Quantities

Professional Standard - Water Conservancy, Ion concentration meter

SL 275-2014 Field test methods for nuclear density-moisture gauges.Part 2: Field test methods for nuclear depth density-moisture probes
SL 275-2001 Field test methods for nuclear density-moisture gauges

水利部, Ion concentration meter

SL/T 275-2014 Nuclear moisture-densitometer field test procedures

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Ion concentration meter

GB/T 34826-2017 Method of performance testing for quadrupole inductively coupled plasma mass spectrometer

IEC - International Electrotechnical Commission, Ion concentration meter

TS 62743-2012 Radiation protection instrumentation – Electronic counting dosemeters for pulsed fields of ionizing radiation (Edition 1.0)