ZH
RU
ES
acidity material
acidity material, Total:497 items.
In the international standard classification, acidity material involves: Products of the chemical industry, Packaging materials and accessories, Raw materials for rubber and plastics, Water quality, Fuels, Inorganic chemicals, Beverages, Wood, sawlogs and sawn timber, Fertilizers, Protection of and in buildings, Refractories, Air quality, Pulps, Electromechanical components for electronic and telecommunications equipment, Products of the textile industry, Vocabularies, Non-metalliferous minerals, Linear and angular measurements, Rubber and plastics products, Plastics, Pipeline components and pipelines, Flexible drives and transmissions, Protection against fire, Wood-based panels, Nuclear energy engineering, Soil quality. Pedology, Electrical wires and cables, Analytical chemistry, Materials for aerospace construction, Powder metallurgy, Test conditions and procedures in general, Equipment for entertainment, Cellular materials, Farming and forestry, Kitchen equipment, Materials and articles in contact with foodstuffs, Furniture, Pharmaceutics, Environmental testing, Testing of metals, Welding, brazing and soldering, Paint ingredients, General methods of tests and analysis for food products, Surface treatment and coating, Semiconductor devices, Protection against dangerous goods, Construction materials, Woodworking equipment, Non-ferrous metals, Aerospace fluid systems and components.
ZA-SANS, acidity material
- SANS 6278:2007 Boric acid equivalent mass concentration of aqueous solutions that contain borate timber preservatives
- SANS 6303:2004 Depth of penetration of borate preservatives in timber
RO-ASRO, acidity material
- STAS 2213/8-1987 SWEET PRODUCTS Acidity and alcalinity determination
- STAS SR ISO 6777:1996 Water quality - Determination of nitrite - Molecular absorption spectrometric method
- STAS SR EN 24498-1-1995 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 1: Materials of essentially uniform section hardness
- STAS 3512/2-1979 THERMO-INSULATING, THERMO-PRESS SHAPED SILICA- ALUMINA REFRACTORIES Special technica requirements for quality
HU-MSZT, acidity material
国家文物局, acidity material
- WW/T 0077-2017 Packaging materials for collections of cultural relics Acid-free paper materials
Danish Standards Foundation, acidity material
- DS 286:1990 Water quality. Sulfate. Nephelometric method
- DS/ISO 254:1982 Quality, finish and balance of transmission pulleys
- DS/EN ISO 9963-2:1996 Water quality - Determination of alkalinity - Part 2: Determination of carbonate alkalinity
- DS/EN 15924:2011 Fertilizers - Determination of the fineness of grinding of soft natural phosphates
- DS/EN ISO 14254:2011 Soil quality - Determination of exchangeable acidity in barium chloride extracts
- DS/EN 10200:1993 Chemical analysis of ferrous materials. Determination of boron in steel. Spectrophotometric method
- DS/ISO 11277:2009 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation
- DS/EN ISO 8299:2021 Nuclear fuel technology – Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019)
- DS/EN 23369:1994 Impermeable sintered metal materials and hardmetals-Determination of density
- DS/EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
- DS/EN 26595:1993 Water quality. Determination of total arsenic. Silver diethyldithiocarbamate spectrophotometric method
- DS/EN ISO 9054:1999 Cellular plastics, rigid - Test methods for self-skinned, high-density materials
- DS/EN 24498-1:1994 Sintered metal materials,excluding hardmetals-Determination of apparent hardness-Part 1:Materials of essentially uniform section hardness
- DS/EN ISO 16264:2004 Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection
American Society for Testing and Materials (ASTM), acidity material
- ASTM D6099-97 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates
- ASTM D6099-03 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates
- ASTM D6099-08 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates
- ASTM D4817-88(2005) Standard Classification for Rubber Compounding Materials-Stearic Acid
- ASTM D6099-18 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates
- ASTM D6099-13 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates
- ASTM D1106-21 Standard Test Method for Acid-Insoluble Lignin in Wood,
- ASTM D2395-17 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
- ASTM D5629-16 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers
- ASTM D1106-96 Standard Test Method for Acid-Insoluble Lignin in Wood
- ASTM D1106-96(2001) Standard Test Method for Acid-Insoluble Lignin in Wood
- ASTM D7253-06(2011)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
- ASTM D7253-16 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
- ASTM D7253-22 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
- ASTM D7253-06 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
- ASTM C401-12 Standard Classification of Alumina and Alumina-Silicate Castable Refractories
- ASTM D4569-89(1998) Standard Test Method for Rubber Chemicals-Determination of Acidity in Sulfur
- ASTM D4569-06(2021) Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur
- ASTM D456-85(1997) Standard test method for rubber composites - Determination of acidity in sulfur
- ASTM D4889-04 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
- ASTM D4569-06(2017) Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur
- ASTM F734-95(2006) Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
- ASTM B735-06(2011) Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
- ASTM F2931-19 Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products
- ASTM F2931-16 Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products
- ASTM F2931-15 Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products
- ASTM F2931-19a Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products
- ASTM F2931-16e1 Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products
- ASTM C591-12 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
- ASTM C1637-21 Standard Test Method for Determination of Impurities in Plutonium Materials—Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis
- ASTM F734-95 Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
- ASTM F734-17 Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
- ASTM C591-07 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
- ASTM C591-12b Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
- ASTM C591-12a Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
- ASTM C591-13 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
- ASTM D4878-03 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
Korean Agency for Technology and Standards (KATS), acidity material
- KS I ISO 9390:2006 Water quality－Determination of borate－Spectrometric method using azomethine-H
- KS I ISO 6878-2007(2017) Water quality－Determination of phosphorus－Ammonium molybdate spectrometric method
- KS I ISO 9963-2:2008 Water quality-Determination of alkalinity-Part 2:Determination of carbonate alkalinity
- KS I ISO 9963-2-2008(2018) Water quality－Determination of alkalinity－Part 2：Determination of carbonate alkalinity
- KS I ISO 6777:2007 Water quality－Determination of nitrite－Molecular absorption spectrometric method
- KS I ISO 11277-2005(2021) Soil quality－Determination of particle size distribution inmineral soil material(Method by sieving and sedimentationfollowing removal of soluble salts, organic matter and carbonates)
- KS I ISO 9390-2006(2021) Water quality－Determination of borate－Spectrometric method using azomethine-H
- KS I ISO 9390-2006(2016) Water quality－Determination of borate－Spectrometric method using azomethine-H
- KS F ISO 16983:2006 Wood-based panels-Determination of swelling in thickness after immersion in water
- KS F ISO 16983:2016 Wood-based panels－Determination of swelling in thickness after immersion in water
- KS F ISO 16985:2006 Wood-based panels-Determination of dimensional changes associated with changes in relative humidity
- KS F ISO 16985:2013 Wood-based panels－Determination of dimensional changes associated with changes in relative humidity
- KS L 5504-2006 Testing method for crushing strength and modulus of rupture of high alumina and fireclay plastic refractories
- KS L 5504-1986 Testing method for crushing strength and modulus of rupture of high alumina and fireclay plastic refractories
- KS I ISO 14254:2018 Soil quality — Determination of exchangeable acidity in barium chloride extracts
- KS M ISO 8067:2008 Flexible cellular polymeric materials－Determination of tear strength
- KS M ISO 2439-2012(2017) Flexible cellular polymeric materials－ Determination of hardness(indentation technique)
- KS M ISO 2439-2012(2022) Flexible cellular polymeric materials－ Determination of hardness(indentation technique)
- KS I ISO 10304-4:2008 Water quality-Determination of dissolved anions by liquid chromatography of ions-Part 4:Determination of chlorate, chloride and chlorite in water with low contamination
- KS I ISO 14869-1:2018 Soil quality — Dissolution for the determination of total element content — Part 1: Dissolution with hydrofluoric and perchloric acids
- KS M 9143-2002 WATER QUALITY-DETERMINATION OF TOTAL ARSENIC-SILVER DIETHYLDITHIOCARBAMATE SPECTROPHOTOMETRIC METHOD
- KS I ISO 16264-2008(2018) Water quality－Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection
- KS M ISO 746:2019 Sodium carbonate for industrial use — Determination of matter insoluble in water at 50 degrees C
- KS M 9143-2005 WATER QUALITY-DETERMINATION OF TOTAL ARSENIC-SILVER DIETHYLDITHIOCARBAMATE SPECTROPHOTOMETRIC METHOD
- KS D ISO 3369:2011 Impermeable sintered metal materials and hardmetals-Determination of density
- KS K 0768-2012 Test method for bursting strength of geotextile
- KS M ISO 12984:2004 Carbonaceous materials used in the production of aluminium－Calcined coke－Determination of particle size distribution
- KS M ISO 9054:2010 Cellular plastics, rigid－Test methods for self-skinned,high-density materials
- KS K 0768-2015 Test method for bursting strength of geotextile
- KS K 0769-2007 Test method for tearing strength of geotextile
- KS M ISO 12984-2004(2019) Carbonaceous materials used in the production of aluminium－Calcined coke－Determination of particle size distribution
- KS M ISO 9054-2010(2020) Cellular plastics, rigid－Test methods for self-skinned,high-density materials
- KS D ISO 3369:2015 Impermeable sintered metal materials and hardmetals－Determination of density
- KS D ISO 4498:2010 Sintered metal materials, excluding hardmetals-Determination of apparent hardness and microhardness
- KS D ISO 4498-1-2001(2006) Sintered metal materials, excluding hardmetals-Determination of apparent hardness－Part 1：Materials of essentially uniform section hardness
- KS K 0762-2011 Test method for determination of long-term design strength of geotextiles
- KS M ISO 8003:2003 Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Measurement of dynamic viscosity
- KS K 0762-2015 Determination of the long-term design strength of geotextiles
- KS M ISO 8003:2013 Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Measurement of dynamic viscosity
- KS M ISO 8003-2003(2008) Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Measurement of dynamic viscosity
International Organization for Standardization (ISO), acidity material
- ISO 9390:1990 Water quality; determination of borate; spectrometric method using azomethine-H
- ISO 6878:1998 Water quality - Spectrometric determination of phosphorus using ammonium molybdate
- ISO 7890-3:1988 Water quality; determination of nitrate; part 3: spectrometric method using sulfosalicylic acid
- ISO 9963-2:1994 Water quality - Determination of alkalinity - Part 2: Determination of carbonate alkalinity
- ISO 6777:1984 Water quality; Determination of nitrite; Molecular absorption spectrometric method
- ISO 20585:2005 Wood-based panels - Determination of wet bending strength after immersion in water at 70℃ or 100℃ (boiling temperature)
- ISO 8299:2019 Nuclear fuel technology — Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry
- ISO 16983:2003 Wood-based panels - Determination of swelling in thickness after immersion in water
- ISO 16985:2003 Wood-based panels - Determination of dimensional changes associated with changes in relative humidity
- ISO 1922:1981 Cellular plastics; Determination of shear strength of rigid materials
- ISO 7890-1:1986 Water quality; Determination of nitrate; Part 1 : 2,6-Dimethylphenol spectrometric method
- ISO 1922:2001 Rigid cellular plastics - Determination of shear strength
- ISO 16984:2003 Wood-based panels - Determination of tensile strength perpendicular to the plane of the panel
- ISO 10304-1:1992 Water quality; determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions, using liquid chromatography of ions; part 1: method for water with low contamination
- ISO 19822:2018 Fertilizers and soil conditioners - Determination of humic and hydrophobic fulvic acids concentrations in fertilizer materials
- ISO 8299:1993 Determination of isotopic content and concentration of uranium and plutonium in nitric acid solution; mass spectrometric method
- ISO 16978:2003 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
- ISO 3369:1975 Impermeable sintered metal materials and hardmetals; Determination of density
- ISO 787-4:1981 General methods of test for pigments and extenders; Part 4 : Determination of acidity or alkalinity of the aqueous extract
- ISO 15923-1:2013 Water quality.Determination of selected parameters by discrete analysis systems.Part 1: Ammonium, nitrate, nitrite, chloride, orthophosphate, sulfate and silicate with photometric detection
- ISO 7890-2:1986 Water quality; Determination of nitrate; Part 2 : 4-Fluorophenol spectrometric method after distillation
- ISO 11277:2020/DAmd 1 Soil quality — Determination of particle size distribution in mineral soil material — Method by sieving and sedimentation — Amendment 1
- ISO 3369:2006 Impermeable sintered metal materials and hardmetals - Determination of density
- ISO 9054:1990 Cellular plastics, rigid; test methods for self-skinned, high-density materials
- ISO 19822:2018/CD Amd 1:2023 Fertilizers and soil conditioners — Determination of humic and hydrophobic fulvic acids concentrations in fertilizer materials — Amendment 1
- ISO 4498:2005 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
- ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
- ISO 1628-4:1986 Plastics; Determination of viscosity number and limiting viscosity number; Part 4 : Polycarbonate (PC) moulding and extrusion materials
- ISO 4498-1:1990 Sintered metal materials, excluding hardmetals; determination of apparent hardness; part 1: materials of essentially uniform section hardness
- ISO 4498-1:1978 Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 1: Materials of essentially uniform section hardness
- ISO/CD 22206:1980 Kraft lignin - Glass transition temperature by differential scanning calorimetry
- ISO/DIS 22206:2023 Kraft lignin — Glass transition temperature by differential scanning calorimetry
- ISO 19747:2020 Fertilizers and soil conditioners — Determination of monosilicic acid concentrations in nonliquid fertilizer materials
- ISO 3124:1976 Crude sodium borates for industrial use — Determination of iron soluble in alkaline medium — 2,2'- Bipyridyl photometric method
- ISO 6595:1982 Water quality; Determination of total arsenic; Silver diethyldithiocarbamate spectrophotometric method
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, acidity material
- GB/T 258-2016 Standard test method for determination of acidity of light petroleum products
- GB/T 7480-1987 Water quality--Determination of nitrate--Spectrophotometric method with phenol disulfonic acid
- GB/T 14679-1993 Air quality. Determination of Ammonia. Sodium salicylate-sodium hypochlorite spectrophotometric method
- GB/T 13897-1992 Water quality.Determination of thiocyanate.Isonicotinic acid pyrazolone spectrophotometry
- GB/T 7481-1987 Water quality--Determination of ammonium--Spectrophotometric method with salicylic acid
- GB 7481-1987 Determination of water quality ammonium salicylic acid spectrophotometric method
- GB/T 6900.10-1986 Fireclay and high-alumina refractories--Determination of manganese oxide content--Ammonium persulfate photometric method
- GB/T 11893-1989 Water quality--Determination of total phosphorus--Ammonium molybdate spectrophotometric method
- GB/T 7493-1987 Water quality--Determination of nitrogen (nitrite)--Spectrophotometric method
- GB/T 11906-1989 Water quality--Determination of manganese--Potassium periodate spectrophotometric method
- GB/T 8805-1988 Determination of deflection for rigid plastic pipes
- GB/T 11357-1989 Quality,Surfaceroughness and balance of transmission pulleys
- GB/T 11357-2008 Quality,roughness and balance of transmission pulleys
- GB/T 13905-1992 Water quality.Determination of TNT.Sodium sulfite spectrophotometry
- GB/T 7469-1987 Water quality--Determination of total mercury--Potassium permanganate-potassium persulfate decomposed method--Dithizone spectrophotometric method
- GB/T 13196-1991 Water quality--Determination of sulphate--Flame atomic absorption spectrophotometric method
- GB/T 10807-1989 Polymeric materials cellular flexible--Determination of hardness(indentation technique)
- GB/T 10807-2006 Flexible cellular polymeric materials - Determination of hardness (indentation technique)
- GB/T 15504-1995 Water quality--Determination of carbon disulfide--Diethylamine cupric acetate spectrophotometric method
- GB/T 11900-1989 Water quality--Determination of trace amounts of arsenic--Spectrophotometric method with silver salt
- GB/T 17135-1997 Soil quality--Determination of total arsenic--Spectrophotometric method with potassium borohyride and silver nitrate
- GB/T 15502-1995 Air quality--Determination of aniline--N-(1-Naphthyl) ethylene diamine dihydrochloride spectrophotometric method
- GB/T 7474-1987 Water quality--Determination of copper--Sodium diethyldithiocarbamate spectrophotometric method
- GB/T 11894-1989 Water quality--Determination of total nitrogen--Alkaline potassium persulfate digestion-UV spectro photometric method
- GB 7474-1987 Water Quality Determination of Copper Sodium Diethyldithiocarbamate Spectrophotometric Method
- GB/T 21333-2008 Rigid cellular plastics.Test methods for self-skinned, high-density materials
- GB/T 9097-2016 Sintered metal materials, excluding hardmetals.Determination of apparent hardness and mincrohardness
- GB/T 7485-1987 Water quality--Determination of total arsenic--Silver diethyldithiocarbamate spectrophotometric method
- GB/T 3850-2015 Impermeable sintered metal materials and hardmetals.Determination of density
- GB/T 3850-1983 Impermeable sintered metal materials and hardmetals--Determination of density
- GB/T 22789.1-2008 Plastics.Unplasticized poly(vinyl chloride) sheets.Types,dimensions and characteristics.Part 1:Sheets of thickness not less than 1 mm
- GB/T 9097.1-2002 Sintered metal materials,excluding hardmetals--Determination of apparent hardness Part 1: Materials of essentially uniform section hardness
- GB/T 6901.3-1986 Silica refractories--Determination of silicon dioxide content--Hydrofluoric acid gravimetric method
- GB/T 17134-1997 Soil quality--Determination of total arsenic--Silver diethyldithiocarbamate spectrophotometry
BE-NBN, acidity material
British Standards Institution (BSI), acidity material
- BS EN ISO 9963-2:1996 Water quality. Determination of alkalinity. Determination of carbonate alkalinity
- BS ISO 14898:1999+A1:2011 Plastics. Aromatic isocyanates for use in the production of polyurethane. Determination of acidity
- DD CEN/TS 15924:2009 Fertilizers. Determination of the fineness of grinding of soft natural phosphates
- BS EN ISO 8299:2021 Nuclear fuel technology. Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry
- BS ISO 11277:2010 Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
- BS ISO 11277:2009 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation
- BS ISO 11277:2020 Tracked Changes. Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
- BS EN ISO 8067:2009 Flexible cellular polymeric materials. Determination of tear strength
- BS EN ISO 8067:2008 Flexible cellular polymeric materials - Determination of tear strength
- BS ISO 15923-1:2013 Water quality. Determination of selected parameters by discrete analysis systems. Ammonium, nitrate, nitrite, chloride, orthophosphate, sulfate and silicate with photometric detection
- BS ISO 19822:2018 Fertilizers and soil conditioners. Determination of humic and hydrophobic fulvic acids concentrations in fertilizer materials
- BS EN ISO 14254:2018 Soil quality. Determination of exchangeable acidity using barium chloride solution as extractant
- BS EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
- BS EN ISO 2439:2001 Flexible cellular polymeric materials - Determination of hardness (indentation technique)
- BS EN ISO 2439:2009 Flexible cellular polymeric materials. Determination of hardness (indentation technique)
- BS EN ISO 2439:2008 Flexible cellular polymeric materials - Determination of hardness (indentation technique)
- BS EN ISO 9054:1999 Cellular plastics, rigid - Test methods for self-skinned high-density materials
- BS EN ISO 3369:2010 Impermeable sintered metal materials and hardmetals - Determination of density
- BS EN ISO 4498:2007 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
- BS EN 26595:1983 Water quality - Determination of total arsenic - Silver diethyldithiocarbamate spectrophotometric method
- BS EN ISO 16264:2004 Water quality. Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection
- BS ISO 23519:2010 Sintered metal materials, excluding hardmetals - Measurement of surface roughness
- BS ISO 19747:2020 Fertilizers and soil conditioners. Determination of monosilicic acid concentrations in nonliquid fertilizer materials
- BS DD CEN/TS 13130-9:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Determination of acetic acid, vinyl ester in food simulants
PT-IPQ, acidity material
Group Standards of the People's Republic of China, acidity material
- T/CMMA 1-2015 Magnesium sulfate for magnesia cement products
- T/HZAS 19-2021 Determination of Phenolic Compounds in Polycarbonate Materials by Gas Chromatography-Mass Spectrometry
- T/SDAQI 079-2023 Food packaging plastic materials and products— Determination of oleic amide and erucic amide—Gas chromatography mass spectrometry
- T/CASAS 010-2019 Determination of Trace Impurities Concentration and Distribution in GaN Materials by Secondary Ion Mass Spectrometry
- T/CGA 032-2022 Method for chemical analysis of water in gold industry- Determination of thiocyanate—Spectrophotometry method
CZ-CSN, acidity material
Association Standard - China Gear Manufacturers Asscociation, acidity material
CU-NC, acidity material
- NC 54-389-1987 Construction Materials. Portland Cement with Moderated Resistance to Sulphates. Quality Specifications
- NC 24-09-1987 Inorganic Chemical Products. Techn?cal Sulphuric Acid. Quality Specifications
- NC 54-388-1987 Construction Materials. Sulfate High-Resistant Cement. Quality Specifications
- NC 54-331-1985 Construction Materials and Products. Calcium Carbonate for Industrial Use. Quality Specifications
- NC 54-290-1984 Construction Materials and Products. Semi-Amorphic Amorphic and Crystalline Calcium Carbonate. Quality Specifications
- NC 54-303-1985 Construction Materials and Products. Fire-Clay and SemiAcid Refractories for Common Purposes. Quality Speoifications
Association Francaise de Normalisation, acidity material
- NF EN ISO 6878:2005 Qualité de l'eau - Dosage du phosphore - Méthode spectrométrique au molybdate d'ammonium
- NF T90-051*NF EN ISO 9963-2:1996 Water quality - Determination of alkalinity - Part 2 : determination of carbonate alkalinity.
- NF EN ISO 9963-2:1996 Qualité de l'eau - Détermination de l'alcalinité - Partie 2 : détermination de l'alcalinité carbonate
- NF EN 15924:2011 Engrais - Détermination de la finesse de mouture des phosphates naturels tendres
- NF T90-023:1997 Water quality. Determination of phosphorus. Ammonium molybdate spectrometric method.
- NF EN ISO 8299:2021 Technologie du combustible nucléaire - Détermination de la teneur isotopique et de la concentration d'uranium et du plutonium dans les matières nucléaires en solution d'acide nitrique par spectrométrie de masse à thermo-ionisation
- NF EN ISO 14254:2018 Qualité du sol - Détermination de l'acidité échangeable dans des extraits au chlorure de baryum
- NF M60-403*NF EN ISO 8299:2021 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry
- NF ISO 14388-3:2014 Qualité du sol - Méthode de comptage acide-base pour les sols sulfatés acides - Partie 3 : méthode par oxydation au peroxyde en suspension combinée à l'acidité et aux sulfures (SPOCAS)
- NF X31-422*NF EN ISO 14254:2018 Soil quality - Determination of exchangeable acidity using barium chloride solution as extractant
- NF X31-559*NF ISO 11277:2020 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation
- NF T70-326:1995 Energetic materials for defense. Physical-chemical analysis and properties. Acidity or alcalinity of hexanitrostilben (hns).
- NF T90-436-1*NF ISO 15923-1:2014 Water quality - Determination of selected parameters by discrete analysis systems - Part 1 : ammonium, nitrate, nitrite, chloride, orthophosphate, sulfate and silicate with photometric detection
- NF EN ISO 3369:2010 Matériaux en métal fritté imperméable et métaux-durs - Détermination de la masse volumique
- NF EN ISO 4498:2010 Matériaux métalliques frittés, à l'exclusion des métaux-durs - Détermination de la dureté apparente et de la microdureté
- NF ISO 15923-1:2014 Qualité de l'eau - Détermination de paramètres sélectionnés par des systèmes d'analyse discrète - Partie 1 : ammonium, nitrate, nitrite, chlorure, orthophosphate, sulfate et silicate par détection photométrique
- NF T90-026:1993 Water quality - Determination of total arsenic - Silver diethyldithiocarbamate spectrophotometric method.
- NF T20-172*NF ISO 8003:1986 Carbonaceous materials for the production of aluminium. Pitch for electrodes. Measurement of dynamic viscosity.
- NF EN ISO 787-4:2017 Méthodes générales d'essai des pigments et matières de charge - Partie 4 : détermination de l'acidité ou de l'alcalinité de l'extrait aqueux
- NF E64-067:1982 Woodworking machines. Conditions of acceptance and nomenclature for circular single. Blade mobile tool saws for longitudinal cutting of solid wood and panels. Precision testing.
- NF A95-321:2008 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness.
- NF A95-321*NF EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
- NF L46-013:1986 Joints toriques - Élastomère butadiene-nitrile acrylique 21A7 - Classe de précision A - Classe de qualité 3.
- NF EN ISO 16264:2004 Qualité de l'eau - Dosage des silicates solubles par analyse en flux (FIA et CFA) et détection photométrique
- NF T56-108*NF EN ISO 1798:2008 Flexible cellular polymeric materials - Determination of tensile strength and elongation at break.
- NF A95-313:1993 Impermeable sintered metal materials and hardmetals. Determination of density.
- NF A95-321-1:1993 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 1 : materials of essentially uniform section hardness.
RU-GOST R, acidity material
- GOST R 51822-2001 Wines and wine materials. Gas-chromatographic method for determination of volume fraction of ethanol and mass concentration of acetic and propionic acids
- GOST R 52391-2005 Wine production. Method for determination of citric acid mass concentration
- GOST 9733.11-1983 Textiles. Test method of colour fastness to acid drops
- GOST 32113-2013 Alcoholic products and raw materials for their production. Enzymatic method for determination of citric acid mass fraction
- GOST R 52963-2008 Water. Methods for determination of alkalinity, and mass concentration of carbonates and hydrocarbonates
- GOST 32713-2014 Alcoholic beverages and raw materials for its production. Identification. Enzymatic method for determination of D-malic acid mass concentration
- GOST 9733.17-1983 Textiles. Test method of colour fastness to acid milling
- GOST 6449.2-1982 Products of wood and wooden materials. Tolerances of angles
- GOST 9733.14-1983 Textiles. Test method of colour fastness to sodium hypochlorite bleaching
- GOST 16838-1971 Parts and products of wood and wooden materials. Method for determination of paint coatings hardness
- GOST ISO 105-N01-2021 Materials and products textile. Tests for colour fastness. Part N01. Colour fastness to hypochlorite bleaching
- GOST 25698-1998 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Materials of essentially uniform section hardness
- GOST 25698-1983 Powder articles. Methods of determination of hardness
- GOST R 59604.4-2021 Welding production qualification system. Part 4. Welding consumables qualification. Rules
- GOST R ISO 3385-1993 Flexible cellular polymeric materials. Determination of fatigue by constant-load pounding
- GOST 13639-1982 Parts and products of wood and wooden materials. Method for determination of thickness of transparent varnish coatings
- GOST R ISO 12984-2015 Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of particle size distribution
Taiwan Provincial Standard of the People's Republic of China, acidity material
- CNS 14907-2005 Method of test for acid-insoluble lignin in wood
- CNS 12108-1987 Method of Test for Acid-Soluble Lignin in Wood and Pulp
- CNS 2721-1987 Method of Test for Acid-Insoluble Lignin in Wood and Pulp
- CNS 7774-1981 Rigid Foam Urethane for Heat Insulating
- CNS 11976-1987 2
- CNS 11979-1987 Method of Test for Crushing Strength and Modulus of Alumina and Fireclay Plastic Refractories
- CNS 14562-2001 High density rigid foam urethane for heat insulating
- CNS 11977-1987 Method of Test for Crushing Strength and Modulus of Repture of Light Weight Castable
- CNS 11422-1985 Method of Test for Refractoriness of Fireclay Plastic Refractories
中华人民共和国环境保护部, acidity material
- GB 7480-1987 Water quality-Determination of nitrate-Spectrophotometric method with phenol disulfonic acid
- GB 11906-1989 Water quality-Determination of manganese-Potassium periodate spectrophotometric method
- GB 7493-1987 Water quality-Determination of nitrogen (nitrite)-Spectrophotometric method
- GB 11893-1989 Water quality-Determination of total phosphorus-Ammonium molybdate spectrophotometric method
- GB 7469-1987 Water quality-Determination of total mercury-potassium permanganats-potassium persaifate decomposed method-Dithizonc spectrophotometric method
- GB 13196-1991 Water quality-Determination of sulphate-Flame atomic absorption spectrophotometric method
- GB 11900-1989 Water quality-Determination of trace amounts of arsenic-Spectrophotometric method with silver salt
- GB 7485-1987 Water quality-Determination of total arsenic-Silver diethyldithiocarbamate spectrophotometric method
Professional Standard - Environmental Protection, acidity material
- HJ/T 342-2007 Water quality. Determination of sulfate. barium chromate spectrophotometry
- HJ 536-2009 Water quality.Determination of ammonia nitrogen.Salicylic acid spectrophotometry
- HJ 670-2013 Water quality.Determination of orthophosphate and total phosphorus.Continuous flow analysis (CFA) and Ammonium molybdate spectrophotometry
- HJ 598-2011 Water quality-Determination of TNT
-Sodium sulfite spectrophotometric method
- HJ 756-2015 Determination of water quality butyl xanthate by UV spectrophotometry
- HJ/T 346-2007 Water quality. Determination of nitrate-nitrogen. Ultraviolet spectrophotometry
- HJ 665-2013 Water quality.Determination of ammonium nitrogen by continuous flow analysis (CFA) and Salicylic acid spectrophotometry
- HJ 666-2013 Water quality.Determination of ammonium nitrogen by flow injection analysis (FIA) and Salicylic acid spectrophotometry
- HJ 671-2013 Water quality.Determination of total phosphorus.Flow injection Analysis (FIA) and Ammonium molybdate spectrophotometry
- HJ 485-2009 Water quality.Determination of copper.Sodium diethyldithiocabamate spectrophometric method
- HJ 667-2013 Water quality.Determination of total nitrogen by continuous flow analysis (CFA) and N-(1-naphthyl)ethylene diamine dihydrochloride spectrophotometry
- HJ 668-2013 Water quality.Determination of total nitrogen by flow injection analysis (FIA) and N-(1-naphthyl)ethylene diamine dihydrochloride spectrophotometry
- HJ 636-2012 Water quality.Determination of total nitrogen.Alkaline potassium persulfate digestion UV spectrophotometric method
Indonesia Standards, acidity material
- SNI 03-6372-2000 Methods for moisture conditioning of wood and wood base materials
- SNI 19-2483-1991 Test methods for phospate and ortophospate content on water by spectrophotometers in a ascorbic acid
- SNI 13-6788-2002 Test methods of peat material pH by pH meter
- SNI 19-6964.1-2003 Seawater quality - Part 1: Test methods of nitrites (NO2-N) with sulfanilamides by spectrofotometry
- SNI 19-6964.6-2003 Seawater quality - Part 6: Test methods of cyanides (CN-) with 4-phyridine carboxylic acid-pyrazolones by spectrophotometry
German Institute for Standardization, acidity material
- DIN EN ISO 9963-2:1996 Water quality - Determination of alkalinity - Part 2: Determination of carbonate alkalinity (ISO 9963-2:1994); German version EN ISO 9963-2:1995
- DIN EN 13971:2008 Carbonate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid; English version of DIN EN 13971:2008-05
- DIN ISO 14869-1:2003-01 Soil quality - Dissolution for the determination of total element content - Part 1: Dissolution with hydrofluoric and perchloric acids (ISO 14869-1:2001)
- DIN EN 15924:2011-12 Fertilizers - Determination of the fineness of grinding of soft natural phosphates; German version EN 15924:2011
- DIN 51901:2006-11 Testing of carbonaceous materials - Determination of density by the xylene method - Solid materials
- DIN EN ISO 9963-2:1996-02 Water quality - Determination of alkalinity - Part 2: Determination of carbonate alkalinity (ISO 9963-2:1994); German version EN ISO 9963-2:1995
- DIN 51938:2015-09 Testing of carbonaceous materials - Determination of particle size distribution by sieving - Solid matters
- DIN 51916:2013-12 Testing of carbonaceous materials - Determination of apparent density after tamping - Solid materials
- DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
- DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
- DIN EN ISO 8299:2021-04 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019); English version EN ISO 8299:2021
- DIN 51917:2002-12 Testing of carbonaceous materials - Rockwell hardness test - Ball indentation method; Solid materials
- DIN 51907:2013-12 Testing of carbonaceous materials - Determination of density with liquid pycnometer - Binding and impregnating materials
- DIN ISO 15923-1:2014-07 Water quality - Determination of selected parameters by discrete analysis systems - Part 1: Ammonium, nitrate, nitrite, chloride, orthophosphate, sulfate and silicate with photometric detection (ISO 15923-1:2013)
- DIN 51918:2018-07 Testing of carbonaceous materials - Determination of bulk density and the open porosity
- DIN EN ISO 4498:2010-11 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010); German version EN ISO 4498:2010
- DIN EN ISO 14254:2018-11 Soil quality - Determination of exchangeable acidity using barium chloride solution as extractant (ISO 14254:2018); German version EN ISO 14254:2018
- DIN EN ISO 9054:2000 Cellular plastics, rigid - Test methods for self-skinned, high-density materials (ISO 9054:1990); German version EN ISO 9054:1999
- DIN EN 2122:1996-03 Aerospace series - Washers, flat, in aluminium alloy, anodized or chromated; German version EN 2122:1996
- DIN ISO 4498:2005 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2005);English version of DIN ISO 4498:2005
- DIN EN ISO 4498:2007 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2005); German version EN ISO 4498:2007
- DIN ISO 15923-1:2014 Water quality - Determination of selected parameters by discrete analysis systems - Part 1: Ammonium, nitrate, nitrite, chloride, orthophosphate, sulfate and silicate with photometric detection (ISO 15923-1:2013)
VN-TCVN, acidity material
- TCVN 4403-2011 Soil quality.Method for determination of exchangeable aluminium and acidity.
- TCVN 6636-2-2000 Water quality.Determination of alkalinity.Part 2: Determination of carbonate alkalinity
- TCVN 6182-1996 Water quality.Determination of total arsenic.Silver diethyldithiocarbamate spectrophotometry method
Japanese Industrial Standards Committee (JISC), acidity material
- JIS A 9514:1989 Thermal insulation material made of rigid urethane foam
- JIS R 2652:1991 Testing method for grain size of light weight castable refractories
- JIS R 2573:1991 Testing method for refractoriness of fireclay plastic refractories
Liaoning Provincial Standard of the People's Republic of China, acidity material
- DB21/T 2069-2013 Chemical analysis method of aluminum silicate refractories
- DB21/T 2070-2013 Chemical Analysis of Aluminosilicate Refractories by Atomic Absorption Spectrometry
PL-PKN, acidity material
- PN C83604-06-1991 Fire extinquishing Media halogenated Determination of acidity-titrimeric method
- PN-EN ISO 8299-2021-07 E Nuclear fuel technology -- Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019)
未注明发布机构, acidity material
Institute of Interconnecting and Packaging Electronic Circuits (IPC), acidity material
AT-ON, acidity material
- ONORM M 6610-2000 Water analysis - Photometric determination of dissolved silicate
- ONORM M 6237-1986 Water analysis; determination ofphosphorus Compounds; ammonium molybdate spectrophotometric method
- OENORM EN ISO 8299:2021 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019)
Shanxi Provincial Standard of the People's Republic of China, acidity material
- DB14/T 2013-2020 Methanol Determination of Water Quality Chromotropic Acid Spectrophotometry
Professional Standard - Geology, acidity material
- DZ/T 0064.43-1993 Groundwater Quality Inspection Method Titration Determination of Acidity
- DZ/T 0064.58-1993 Groundwater Quality Test Method for Determination of Nitrate by Disulfonic Acid Phenol Spectrophotometry
- DZ/T 0064.60-1993 Spectrophotometric method for determination of nitrite radicals in groundwater quality testing
- DZ/T 0064.58-2021 Methods of Analytical Groundwater Quality Part 58: Determination of Nitrate Disulfonic Acid Phenol Spectrophotometric Method
- DZ/T 0064.24-1993 Groundwater quality testing method Determination of iron by thiocyanate spectrophotometry
- DZ/T 0064.31-1993 Groundwater Quality Examination Method Ammonium Persulfate Spectrophotometric Determination of Manganese
- DZ/T 0064.59-1993 Groundwater Quality Examination Method Determination of Nitrate by Ultraviolet Spectrophotometry
- DZ/T 0064.43-2021 Analytical methods for groundwater quality - Part 43: Determination of acidity by titration
- DZ/T 0276.12-2015 Regulation for testing the physical and mechanical properties of rock.Part 12:Test for determining the acid resistance and alkali resistance of rock
- DZ/T 0064.44-1993 Determination of boron by spectrophotometric method with H acid-formimine
- DZ/T 0064.15-1993 Groundwater quality testing method - Determination of hardness by ethylenediaminetetraacetic acid disodium titration method
- DZ/T 0064.60-2021 Analytical methods of groundwater quality - Part 60: Determination of nitrite spectrophotometric method
- DZ/T 0064.62-2021 Methods of analysis of groundwater quality - Part 62: Determination of silicic acid by silicon molybdenum yellow spectrophotometric method
IN-BIS, acidity material
TR-TSE, acidity material
- TS 475-1976 TESTING OF COLOUR FASTNESS OF TEXTILE; ACID FASTNESS OF DYED AND PRINTED MATERIALS
- TS 1975-1975 FLEXIBLE CELLULAR MATERIALS - DETERMINATION OF APPARENT DENSITY
- TS 1976-1975 FLEXIBLE CELLULAR MATERIALS - DETERMINATION OF APPARENT DENSITY
- TS 2706-1977 FLEXIBLE CELLULAR MATERIALS HARD NESS TESTING BY INDENTATION TECHNIQUES
- TS 2012-1975 FLEXIBLE CELLULAR MATERIALS DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK
Lithuanian Standards Office , acidity material
- LST EN 15924-2011 Fertilizers - Determination of the fineness of grinding of soft natural phosphates
- LST EN ISO 9963-2:1999 Water quality - Determination of alkalinity - Part 2: Determination of carbonate alkalinity (ISO 9963-2:1994)
- LST EN ISO 14254:2011 Soil quality - Determination of exchangeable acidity in barium chloride extracts (ISO 14254:2001)
- LST EN ISO 8299:2021 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019)
AENOR, acidity material
- UNE-EN 15924:2012 Fertilizers - Determination of the fineness of grinding of soft natural phosphates
- UNE-EN ISO 9963-2:1996 WATER QUALITY. DETERMINATION OF ALKALINITY. PART 2: DETERMINATION OF CARBONATE ALKALINITY. (ISO 9963-2:1994).
- UNE-EN ISO 14254:2011 Soil quality - Determination of exchangeable acidity in barium chloride extracts (ISO 14254:2001)
- UNE 104281-0-4:1987 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. NON BITUMINOUS RAW MATERIALS. TESTING METHODS. MEDIA MASS AND THICKNESS
- UNE 55627:1983 SURFACE ACTIVE AGENTS. SODIUM AND POTASSIUM SILICATES TO BE USED AS RAW-MATERIALS IN DETERGENT FORMULATIONS. DETERMINATION OF TOTAL ALKALINITY. TITRIMETRIC METHOD
- UNE-ISO 14869-1:2007 Soil quality. Dissolution for the determination of total element content. Part 1: Dissolution with hydrofluoric and perchloric acids. (ISO 14869-1:2001)
Heilongjiang Provincial Standard of the People's Republic of China, acidity material
- DB23/T 2012-2017 Determination of water quality permanganate index spectrophotometry
Anhui Provincial Standard of the People's Republic of China, acidity material
- DB34/T 1790-2012 Polycarbonate (PC) Drinking Water Bucket Material Identification Technical Regulations
- DB34/T 1681-2012 Commercial stainless steel kitchen equipment material and thickness requirements
国家市场监督管理总局、中国国家标准化管理委员会, acidity material
- GB/T 11357-2020 Quality, roughness and balance of transmission pulleys
- GB/T 41435-2022 Determination of boric acid and salts of boric acid in toy materials —Inductively coupled plasma mass spectrometry
- GB/T 38359-2019 Data-analysis methods of strength properties for structural wood and wood-based products
Professional Standard - Light Industry, acidity material
- QB/T 2803-2006 Method for measuring bending degree of rigid plastic pipes
- QB/T 4448-2013 Determination of peel strength of flexible overlaid materials in furniture surface
- QB/T 4449-2013 Determination of peel strength of rigid overlaid materials in furniture surface
- QB/T 3655-1999 Determination of peel strength of soft cladding materials on furniture surfaces
- QB/T 3656-1999 Determination of peel strength of hard cladding materials on furniture surfaces
European Committee for Standardization (CEN), acidity material
- EN ISO 14254:2018 Soil quality - Determination of exchangeable acidity using barium chloride solution as extractant
- EN ISO 14254:2011 Soil quality - Determination of exchangeable acidity in barium chloride extracts
- EN ISO 9963-2:1995 Water Quality - Determination of Alkalinity - Part 2 : Determination of Carbonate Alkalinity (ISO 9963-2 : 1994)
- EN ISO 8299:2021 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019)
- EN 10003-1:1994 Metallic Materials - Brinell Hardness Test - Part 1: Test Method
- EN ISO 10304-4:2022 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO 10304-4:2022)
- prEN 23369-1992 Impermeable sintered metal materials and hardmetals; determination of density (ISO 3369:1975)
- EN ISO 2439:2008 Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008)
- EN ISO 8067:1995 Flexible Cellular Polymeric Materials - Determination of Tear Strength (ISO 8067 : 1989)
- EN ISO 9054:1999 Cellular Plastics, Rigid - Test Methods for Self-Skinned, High-Density Materials
- EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010)
International Electrotechnical Commission (IEC), acidity material
- IEC 60754-2:2011 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductibity
- IEC 60754-1:2011 Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
GM Holden Ltd, acidity material
UY-UNIT, acidity material
IT-UNI, acidity material
Society of Automotive Engineers (SAE), acidity material
- SAE AMS6479A-2002 Steel, Bars, Forgings, and Tubing 1.45Cr (0.98 - 1.10C) (SAE 52100) Special Aircraft-Quality Cleanliness
- SAE AMS6479E-2020 Steel, Bars, Forgings, and Tubing 1.45Cr (0.93-1.05C) (SAE 52100) Special Aircraft-Quality Cleanliness
- SAE AMS2301D-1967 AIRCRAFT QUALITY STEEL CLEANLINESS Magnetic Particle Inspection Procedure
- SAE AMS2301E-1974 AIRCRAFT QUALITY STEEL CLEANLINESS Magnetic Particle Inspection Procedure
- SAE AMS2301G-1985 AIRCRAFT QUALITY STEEL CLEANLINESS Magnetic Particle Inspection Procedure
- SAE AMS2301B-1964 AIRCRAFT QUALITY STEEL CLEANLINESS Magnetic Particle Inspection Procedure
- SAE AMS2301A-1961 AIRCRAFT QUALITY STEEL CLEANLINESS Magnetic Particle Inspection Procedure
- SAE AMS2301C-1966 AIRCRAFT QUALITY STEEL CLEANLINESS Magnetic Particle Inspection Procedure
- SAE AMS2301-1960 AIRCRAFT QUALITY STEEL CLEANLINESS Magnetic Particle Inspection Procedure
- SAE AMS2301J-2001 Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure
- SAE AMS2301J-2006 Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure
- SAE AMS2301K-2015 Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure
- SAE AMS2300A-1961 PREMIUM AIRCRAFT QUALITY STEEL CLEANLINESS Magnetic Particle Inspection Procedure
- SAE AMS2300-1959 PREMIUM AIRCRAFT QUALITY STEEL CLEANLINESS Magnetic Particle Inspection Procedure
- SAE AMS2300F-1984 PREMIUM AIRCRAFT-QUALITY STEEL CLEANLINESS Magnetic Particle Inspection Procedure
- SAE AMS2300E-1983 PREMIUM AIRCRAFT-QUALITY STEEL CLEANLINESS Magnetic Particle Inspection Procedure
- SAE AMS2300G-1995 PREMIUM AIRCRAFT-QUALITY STEEL CLEANLINESS Magnetic Particle Inspection Procedure
- SAE AMS2300B-1973 PREMIUM AIRCRAFT-QUALITY STEEL CLEANLINESS Magnetic Particle Inspection Procedure
- SAE AMS2300D-1981 PREMIUM AIRCRAFT-QUALITY STEEL CLEANLINESS Magnetic Particle Inspection Procedure
- SAE AMS2300C-1980 PREMIUM AIRCRAFT-QUALITY STEEL CLEANLINESS Magnetic Particle Inspection Procedure
- SAE AMS6479B-2007 Steel, Bars, Forgings, and Tubing 1.45Cr (0.98 - 1.10C) (SAE 52100) Special Aircraft-Quality Cleanliness
- SAE AMS6479C-2011 Steel, Bars, Forgings, and Tubing 1.45Cr (0.98 - 1.10C) (SAE 52100) Special Aircraft-Quality Cleanliness
- SAE MAM2300A-2000 PREMIUM AIRCRAFT-QUALITY STEEL CLEANLINESS Magnetic Particle Inspection Procedure Metric (SI) Measurement
Underwriters Laboratories (UL), acidity material
- UL 2885 BULLETIN-2013 UL Standard for Safety Outline of Investigation for Acid Gas@ Acidity and Conductivity of Combusted Materials
- UL 1893 BULLETIN-2013 UL Standard for Safety Outline of Investigation for Acid Gas@ Acidity and Conductivity of Combusted Materials
- UL 1893 BULLETIN-2015 UL Standard for Safety Outline of Investigation for Acid Gas@ Acidity and Conductivity of Combusted Materials
- UL 2885 BULLETIN-2015 UL Outline of Investigation for Acid Gas@ Acidity and Conductivity of Combusted Materials and Assessment of Halogens
- UL SUBJECT 2885-2013 UL Standard for Safety Outline of Investigation for Acid Gas@ Acidity and Conductivity of Combusted Materials (Issue 1)
- UL SUBJECT 2885-2018 UL Outline of Investigation for Acid Gas@ Acidity and Conductivity of Combusted Materials and Assessment of Halogens (Issue 3)
- UL SUBJECT 2885-2015 UL Outline of Investigation for Acid Gas@ Acidity and Conductivity of Combusted Materials and Assessment of Halogens (Issue 2)
YU-JUS, acidity material
- JUS H.B8.432-1983 High-grade fluorspar and acid-grade fluorspar for industrial use. Determination of total phosphorus content. Molybdophosphate photometric method
- JUS B.C1.009-1982 White Portland cement. Classification, definition, quality requirements and determination of whiteness of cement
American National Standards Institute （ANSI), acidity material
- ANSI/ASTM D5629:1999 Test Method for Polyurethane Raw Materials: Determination of Acidity in Low Acidity Aromatic Isocyanates and Polyurethane Prepolymers (08.03)
ES-AENOR, acidity material
Professional Standard - Agriculture, acidity material
- NY/T 1860.2-2016 Guidelines on the determination of physico-chemical properties of pesticides.Part 2:Acidity and alkalinity
- NY/T 1860.2-2010 Guidance on the determination of physico-chemical properties of pesticides.Part 2:Acidity and alkalinity
- CNAS-EL-19：2021 Specific requirements for raw materials to be pure substances in the certification of reference material/standard sample producers
- CNAS-EL-19:2021 Specific requirements for raw materials to be pure substances in the certification of reference material/standard sample producers
NL-NEN, acidity material
- NEN-ISO 6777:1993 Water quality. Determination of nitrite. Molecular absorption spectrometric method (ISO 6777:1984)
- NVN 2824-1994 Air quality.Ambient air.Determination of the concentration of nitric acid,hydrochloric acid,ammonia and sulphur dioxide as gases.Rotating denuder method
- NEN 2789-1983 Air quality - Ambient air - Photometric determination of ozone content with indigo disulphonate
KR-KS, acidity material
- KS I ISO 14254-2018 Soil quality — Determination of exchangeable acidity in barium chloride extracts
- KS I ISO 14869-1-2018 Soil quality — Dissolution for the determination of total element content — Part 1: Dissolution with hydrofluoric and perchloric acids
- KS M ISO 746-2019 Sodium carbonate for industrial use — Determination of matter insoluble in water at 50 degrees C
- KS D ISO 4498-2010 Sintered metal materials, excluding hardmetals－Determination of apparent hardness and microhardness
- KS D ISO 3369-2011 Impermeable sintered metal materials and hardmetals－Determination of density
ES-UNE, acidity material
- UNE-EN ISO 8299:2021 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019) (Endorsed by Asociación Española de Norma...
- UNE-EN ISO 14254:2018 Soil quality - Determination of exchangeable acidity using barium chloride solution as extractant (ISO 14254:2018) (Endorsed by Asociación Española de Normalización in June of 2018.)
SAE - SAE International, acidity material
- SAE MAM2300-1984 Premium Aircraft-Quality Steel Cleanliness Magnetic Particle Inspection Procedure Metric (SI) Measurement
- SAE MAM2300A-1992 Premium Aircraft-Quality Steel Cleanliness Magnetic Particle Inspection Procedure Metric (SI) Measurement
- SAE AMS6479-1996 Steel@ Bars@ Forgings@ and Tubing 1.45Cr (0.98 - 1.10C) (SAE 52100) Special Aircraft-Quality Cleanliness (UNS G52986)
- SAE AMS6479D-2015 Steel@ Bars@ Forgings@ and Tubing 1.45Cr (0.93-1.05C) (SAE 52100) Special Aircraft-Quality Cleanliness (UNS G52986)
SE-SIS, acidity material
Professional Standard - Nuclear Industry, acidity material
- EJ/T 1231.2-2008 Test method for analysis of impurity in diuranate.Part2: Determination of phosphate by phoshocomolybdenum blue spectrophotometry
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., acidity material
Military Standard of the People's Republic of China-General Armament Department, acidity material
- GJB 9254-2017 Determination method of mass concentration of neodymium element in neodymium phosphate glass ICP-AES method
Hebei Provincial Standard of the People's Republic of China, acidity material
- DB13/T 5127.5-2019 Determination of Toxic and Hazardous Substances in Extracts of Implantable Medical Devices - Spectrophotometric Method for Migration of Guanidinium Thiocyanate
海关总署, acidity material
- SN/T 5323-2021 Determination of the migration amount of parabens in food contact materials, polymer materials, plastics, liquid chromatography-tandem mass spectrometry
国家质量监督检验检疫总局, acidity material
- SN/T 4606-2016 Determination of phthalate plasticizers in food contact materials polymeric materials food simulants liquid chromatography-mass spectrometry/mass spectrometry
- SN/T 4653-2016 Method for detection of carbamate pesticide residues in exported Chinese medicinal materials using liquid chromatography-mass spectrometry/mass spectrometry
GM North America, acidity material
- GM GM2901M-2000 Spring Materials - Oil Tempered High Tensile Steel Wire, Valve Spring Quality
Professional Standard - Aviation, acidity material
- HB 5271-1983 Inspection methods and standards for the purity of aviation advanced high-quality steel
TH-TISI, acidity material
- TIS 1860-1999 Polymeric materials, cellular flexible.polyurethane foam for load.bearing applications excluding carpet underlay.specification
- TIS 1780.4-2000 General methods of test for pigments and extenders.part 4: determination of acidity or alkalinity of the aqueous extract
Professional Standard - Forestry, acidity material
- LY/T 2151-2013 Method for determination of holocellulose and acid-insoluble lignin in wood.Near infrared spectroscopy
CEN - European Committee for Standardization, acidity material
- EN ISO 787-4:2017 General methods of test for pigments and extenders - Part 4: Determination of acidity or alkalinity of the aqueous extract
CH-SNV, acidity material
- SN EN ISO 8299:2021 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019)
BELST, acidity material
- STB 1931-2009 Wine production and wine raw material. Methods for determination a mass concentration of titrating acids
- STB 17.13.05-43-2015 Еnvironmental pгоtесtion and nature use. Analytic (laboratory) control and monitoring of the environment. Water quality. Determination of the concentration of nitrogen of nitrates by photometric method with salicylic acid
- STB 17.13.05-45-2016 Environmental protection and nature use. Analytical control and monitoring. Water quality. Determination of the concentration of total iron photometrically with sulfosalicylic acid
Professional Standard - Petrochemical Industry, acidity material
- SH/T 1628.2-1996 Determination of industrial vinyl acetate purity and organic impurities by gas chromatography
- SH/T 1628.2-2023 Vinyl acetate for industrial use－ Part 2: Determination of purity and organic impurities－ Gas Chromatographic Method
Professional Standard - Ferrous Metallurgy, acidity material
- YB/T 4012-1991 High-quality magnesia chemical analysis method Determination of manganese oxide content by potassium periodate photometry
- YB 4012-1991 High-quality magnesia chemical analysis method Determination of manganese oxide content by potassium periodate photometry
Professional Standard - Public Safety Standards, acidity material
- GA/T 1916-2021 Fluoroacetate Ion Detection in Forensic Science Biological Samples by Liquid Chromatography-Mass Spectrometry
American Society of Mechanical Engineers (ASME), acidity material