ZH
RU
ES

The standard curve requires several 9

The standard curve requires several 9, Total:78 items.

In the international standard classification, The standard curve requires several 9 involves: Shipbuilding and marine structures in general, Components and accessories for telecommunications equipment, Mobile services, Road vehicle systems, Telecommunication systems, Installations in buildings, Networking, Protective equipment, Electromagnetic compatibility (EMC), Radiocommunications, Microbiology, Audio, video and audiovisual engineering.


Association Francaise de Normalisation, The standard curve requires several 9

  • NF S77-105:1992 Personal eye-protection. Ultraviolets filters. Transmittance requirements and recommended use.
  • NF C46-811-420*NF EN 61162-420:2002 Martitime navigation and radiocommunication equipment and systems - Digital interfaces - Part 420 : multiple talkers and multiple listeners - Ship systems interconnection - Companion standard requirements and basic companion standards
  • NF EN 300330:2017 Dispositifs à courte portée (SRD) - Équipements radioélectriques dans la bande de fréquences de 9 kHz à 25 MHz et systèmes à boucle d'induction de 9 kHz à 30 MHz - Norme harmonisée couvrant les exigences essentielles de l'article 3, paragra...
  • NF EN 61162-420:2002 Matériels et systèmes de navigation et de radiocommunications maritimes - Interfaces numériques - Partie 420 : émetteurs multiples et récepteurs multiples - Interconnexion des systèmes embarqués - Exigences standard de la couche utilisateur et s...
  • NF EN 302961:2016 Radiobalise maritime de localisation personnelle destinée à être utilisée sur la fréquence de 121,5 MHz, pour les besoins de recherche et de sauvetage uniquement - Norme européenne harmonisée couvrant les exigences essentielles de l'article 3.2...
  • NF Z84-330*NF EN 300330:2017 Short range devices (SRD) - Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz - Harmonised standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU (V2.1
  • NF Z84-489-3*NF EN 301489-3:2019 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part 3 : specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz - Harmonised Standard covering the essential requirements of arti
  • NF Z84-489-9*NF EN 301489-9:2021 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part 9 : specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices - Harmonised Standard co
  • NF EN 300422-4:2017 Microphones sans fil - PMSE audio jusqu'à 3 GHz - Partie 4 : aides de suppléance à l'audition incluant des amplificateurs de son personnels et des systèmes inductifs jusqu'à 3 GHz - Norme harmonisée couvrant les exigences essentielles de l'ar...
  • NF Z84-422-4*NF EN 300422-4:2017 Wireless Microphones - Audio PMSE up to 3 GHz - Part 4 : assistive Listening Devices including personal sound amplifiers and inductive systems up to 3 GHz - Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU (V2
  • NF Z84-500-2*NF EN 302500-2:2011 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) using Ultra WideBand (UWB) technology - Location Tracking equipment operating in the frequency range from 6 GHz to 9 GHz - Part 2 : harmonized EN covering the essen

British Standards Institution (BSI), The standard curve requires several 9

  • BS EN 61162-420:2002 Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Multiple talkers and multiple listeners. Ship systems interconnection. Companion standard requirements and basic companion standards

International Telecommunication Union (ITU), The standard curve requires several 9

American National Standards Institute （ANSI), The standard curve requires several 9

  • ANSI/ATIS 0600328-2012 Protection of Telecommunications Links from Physical Stress and Radiation Effects Associated Requirements for DC Power Systems (A Baseline Standard)
  • ANSI/TIA-568-B.2-9-200x-2005 Commercial Building Telecommunications Cabling Standard - Part 2: - Balanced Twisted-Pair Cabling Components - Addendum 9 - Additional Category 6 Balance Requirements and Mesurement Procedures
  • ANSI/IEEE 802.15.3:2003 Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for
  • ANSI/IEEE 802.15.3c:2009 Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for

Danish Standards Foundation, The standard curve requires several 9

  • DS/EN 61162-420:2002 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 420: Multiple talkers and multiple listeners - Ship systems interconnection - Companion standard requirements and basic companion standards

ES-UNE, The standard curve requires several 9

  • UNE-EN 61162-420:2002 Maritime navigation and radiocommunication equipment and systems - Digital interfaces -- Part 420: Multiple talkers and multiple listeners - Ship systems interconnection - Companion standard requirements and basic companion standards (Endorsed by AENOR...
  • UNE-EN ISO 21909-1:2023 Passive neutron dosimetry systems - Part 1: Performance and test requirements for personal dosimetry (ISO 21909-1:2021) (Endorsed by Asociación Española de Normalización in September of 2023.)
  • UNE-EN 300330 V2.1.1:2017 Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU (Endor...

Canadian Standards Association (CSA), The standard curve requires several 9

  • CSA T568.1-1-2005 Commercial building telecommunications cabling standard — Part 1: General requirements — Addendum 1 — Minimum 4-pair UTP and 4-pair ScTP patch cable bend radius (First Edition)
  • CSA T568.1-1-05-2005 Commercial building telecommunications cabling standard - Part 1: General requirements - Addendum 1 - Minimum 4-pair UTP and 4-pair ScTP patch cable bend radius First Edition; ANSI/TIA/EIA-568-B.1-1-2001

German Institute for Standardization, The standard curve requires several 9

  • DIN EN 300392-9:2012 Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 9: General requirements for supplementary services (Endorsement of the English version EN 300 392-9 V1.5.1 (2012-04) as German standard)
  • DIN EN 61162-420:2002-11 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 420: Multiple talkers and multiple listeners; Ship systems interconnection; Companion standard requirements and basic companion standards (IEC 61162-420:2001);...
  • DIN EN 300392-9:2008 Terrestrial Trunked Radio (TETRA) - Voice plus Date (V+D) - Part 9: General requirements for supplementary services (Endorsement of the English version EN 300392-9 V1.3.2 (2008-08) as German standard)
  • DIN EN 300330-2:2010 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz - Part 2: Harmonized EN covering the esse
  • DIN EN 300330-2:2015 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz - Part 2: Harmonized EN covering the esse
  • DIN 58940-2 Bb.2:2002 Medical microbiology - Susceptibility testing of pathogens to antimicrobial agents - Part 2: Active substance carriers for the agar diffusion test; Carrier loads and values required for drawing a standard curve
  • DIN EN 300422-4:2017-09 Wireless Microphones - Audio PMSE up to 3 GHz - Part 4: Assistive Listening Devices including personal sound amplifiers and inductive systems up to 3 GHz - Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU (...
  • DIN EN 302961-2:2013 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Maritime Personal Homing Beacon intended for use on the frequency 121,5 MHz for search and rescue purposes only - Part 2: Harmonized EN covering the essential requirements of article 3.2 of
  • DIN EN 300422-4:2017 Wireless Microphones - Audio PMSE up to 3 GHz - Part 4: Assistive Listening Devices including personal sound amplifiers and inductive systems up to 3 GHz - Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU (End
  • DIN EN 301489-31:2017 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part 31: Specific conditions for equipment in the 9 kHz to 315 kHz band for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P) - Harm
  • DIN EN 303098-2:2015 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Maritime low power personal locating devices employing AIS - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive (Endorsement of the English versi

Lithuanian Standards Office , The standard curve requires several 9

  • LST EN 61162-420-2003 Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Part 420: Multiple talkers and multiple listeners. Ship systems interconnection. Companion standard requirements and basic companion standards (IEC 61162-420:2001)
  • LST EN 302 961-2 V1.2.1-2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); Maritime Personal Homing Beacon intended for use on the frequency 121,5 MHz for search and rescue purposes only; Part 2: Harmonized EN covering the essential requirements of article 3.2 of th

Underwriters Laboratories (UL), The standard curve requires several 9

  • UL 2272 CRD-2018 UL Standard for Safety Electrical Systems for Personal E-Mobility Devices - Section / Paragraph Reference: 9@ 16@ 24@ 26@ 27@ 28 Subject: Clarification of Requirement for Personal E-mobility Device Powered by Lead-Acid Battery (Edition 1; November 21@ 201
  • UL 2231-1 CRD-2014 UL Standard for Safety Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits: General Requirements - Section / Paragraph Reference: 2 Subject: Programmable Components (Edition 2; September 7, 2012)
  • UL 817 CRD-2017 UL Standard for Safety Cord Sets and Power-Supply Cords - Section / Paragraph Reference: (New) 9.12.1 - 9.12.3 (New) Section 19A@ 19A.1 - 19A.9 Subject: Adding requirements for testing of electronic circuitry (Edition 12: March 11@ 2015)
  • UL 1004-1 CRD-2014 UL Standard for Safety Rotating Electrical Machines - General Requirements - Section / Paragraph Reference: New Appendix A Subject: Form Wound Machines (motors and generators) rated up to 34@000 V (Edition 2: September 19@ 2012)
  • UL 2231-2 CRD-2014 UL Standard for Safety Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits: Particular Requirements for Protection Devices for Use in Charging Systems - Section / Paragraph Reference: Sections 14, 17, 18A, and Annex A Subject: Programma
  • UL 1017 CRD-2010 UL Standard for Safety Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines - Section / Paragraph Reference: 3.1.1, 4.4.1, 4.8.1, Appendix A Subject: (1) UL and CSA Component Requirement, (2) Cord Reels, and (3) Revisions to Annex A Su

TIA - Telecommunications Industry Association, The standard curve requires several 9

  • TIA/EIA-568-B.1-1-2001 Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius (Addendum 1 to TIA/EIA-568-B.1)

Institute of Electrical and Electronics Engineers (IEEE), The standard curve requires several 9

  • IEEE Std 802.15.1-2005 IEEE Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 15.1a: Wireless Medium Access Control (MAC) and Physical Layer (PHY) specifications for Wireless Personal Area Networks (WPAN)
  • IEEE Std 802.15.3-2003 IEEE Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (WPAN)
  • IEEE P802.15.3e/D06, October 2016 IEEE Draft Standard for Information Technology-- Local and Metropolitan Area Networks-- Specific Requirements-- Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (WPAN) Am
  • IEEE P802.15.3e/D07, November 2016 IEEE Draft Standard for Information Technology-- Local and Metropolitan Area Networks-- Specific Requirements-- Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (WPAN) Am
  • IEEE P802.15.3e/D04, July 2016 IEEE Draft Standard for Information Technology-- Local and Metropolitan Area Networks-- Specific Requirements-- Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (WPAN) Am
  • IEEE Std 802.15.1-2002 IEEE Standard for Telecommunications and Information Exchange Between Systems - LAN/MAN - Specific Requirements - Part 15: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Wireless Personal Area Networks (WPANs)
  • IEEE Std 802.15.4-2006 IEEE Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPANs)
  • IEEE P802.15.3e/D05, October 2016 IEEE Draft Standard for Information Technology-- Local and Metropolitan Area Networks-- Specific Requirements-- Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (WPAN) Am
  • IEEE Std 802.15.4-2003 IEEE Standard for Telecommunications and Information Exchange Between Systems - LAN/MAN Specific Requirements - Part 15: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPAN)
  • IEEE P802.15.3d/D2, February 2017 IEEE Draft Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (WPAN) Am
  • IEEE P802.15.3d/D4, May 2017 IEEE Draft Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (WPAN) Am
  • IEEE Std P802.15.3/D17 IEEE Draft Standard for Telecommunications and Information Exchange Between Systems -- LAN/MAN Specific Requirements -- Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (
  • IEEE P802.15.3d/D3, May 2017 IEEE Draft Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (WPAN) Am
  • IEEE Std 802.15.4a-2007 IEEE Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low-Rate Wireless Personal Area Networks (WPANs): Amendme

Society of Automotive Engineers (SAE), The standard curve requires several 9

  • SAE J2299-1996 Ultraviolet Leak Detection: Performance Requirements for Fluorescent Refrigerant Leak Detection Dye Injection Equipment for Aftermarket Service of Mobile Air- Conditioning Systems, Standard September 1996
  • SAE J2299-2012 Ultraviolet Leak Detection: Performance Requirements for fluorescent Refrigerant Leak Detection Dye Injection Equipment for aftermarket Service of Mobile Air-Conditioning Systems

ETSI - European Telecommunications Standards Institute, The standard curve requires several 9

  • ETSI EN 300 330:2017 Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU (V2.1.1)
  • ETSI EN 300 330:2016 Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU (V2.1.1)
  • ETSI EN 301 489-3:2017 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised Standard covering the essential requirements of article
  • ETSI EN 301 489-3:2016 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised standard covering the essential requirements of article
  • ETSI EN 301 489-3:1999 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 3: Specific Requirements for Short-Range Devices (SRD) Operating on Frequencies between 9 kHz and 25 GHz (V
  • ETSI EN 300 422-4:2017 Wireless Microphones; Audio PMSE up to 3 GHz; Part 4: Assistive Listening Devices including personal sound amplifiers and inductive systems up to 3 GHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU (V2.1.1

European Telecommunications Standards Institute (ETSI), The standard curve requires several 9

  • ETSI EN 300 330-2017 Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU (V2.1.1)
  • ETSI EN 301 489-3-2001 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 3: Specific Conditions for Short-Range Devices (SRD) Operating on Frequencies between 9 KHz and 40 GHz V1.
  • ETSI EN 300 330-2-2001 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Short Range Devices (SRD); Radio Equipment in the Frequency Range 9 KHz to 25 MHz and Inductive Loop Systems in the Frequency Range 9 KHz to 30 MHz; Part 2: Harmonized EN under Article 3.2 of
  • ETSI EN 300 330-2-2010 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN covering the essenti
  • ETSI EN 302 961-2-2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); Maritime Personal Homing Beacon intended for use on the frequency 121,5 MHz for search and rescue purposes only; Part 2: Harmonized EN covering the essential requirements of article 3.2 of th
  • ETSI EN 302 195-2-2004 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio equipment in the frequency range 9 kHz to 315 kHz for Ultra Low Power Active Medical Implants (ULP-AMI) and accessories; Part 2: Harmonized EN covering essential requirements of article
  • ETSI EN 301 489-31-2016 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 31: Specific conditions for equipment in the 9 kHz to 315 kHz band for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P); Harmon
  • ETSI EN 301 908-9-2002 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT-2000 Third-Generation Cellular Networks; Part 9: Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) Covering Essential Requireme
  • ETSI EN 302 500-2-2010 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 9 GHz; Part 2: Harmonized EN covering the essential

RU-GOST R, The standard curve requires several 9

  • GOST R EN 353-1-2008 Occupational safety standards system. Personal protective equipment against falls from a height. Guided type fall arresters including a rigid anchor line. Part 1. General technical requirements. Test methods

未注明发布机构, The standard curve requires several 9

  • DIN EN 301489-19:2020 Electromagnetic compatibility (EMC) – Standard for radio equipment and services – Part 19: Specific conditions for mobile earth stations (ROMES) for data transmission in the 1.5 GHz frequency band and GNSS receivers operating in the RNSS band (ROGNSS) and

  The standard curve requires several 9, Several standard curves 9.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved