ZH
RU
ES

molecular weight distribution gpc

molecular weight distribution gpc, Total:238 items.

In the international standard classification, molecular weight distribution gpc involves: Protection against dangerous goods, Electricity. Magnetism. Electrical and magnetic measurements, Soil quality. Pedology, Raw materials for rubber and plastics, Construction materials, Medical equipment, Plastics, Analytical chemistry, Rubber, Particle size analysis. Sieving, Microbiology, Astronomy. Geodesy. Geography, Passenger cars. Caravans and light trailers, Environmental protection, Road vehicle systems, Photography, Aircraft and space vehicles in general, Insulation, Insulating materials, Power transmission and distribution networks, Farming and forestry, Protection of and in buildings, Testing of metals, Products of the chemical industry, Metrology and measurement in general, Geology. Meteorology. Hydrology, Wind turbine systems and other alternative sources of energy, Furniture, Paints and varnishes, Physics. Chemistry, Powder metallurgy, Semiconducting materials, Laboratory medicine, Textile fibres, Electronic components in general, Printed circuits and boards, Semiconductor devices, Conducting materials, Fuels.

Professional Standard - Aerospace, molecular weight distribution gpc

QJ 1870-1990 Epoxy resin molecular weight and its distribution test method (GPC method)

American Society for Testing and Materials (ASTM), molecular weight distribution gpc

ASTM D3536-76e1 Standard Test Method for Molecular Weight Averages And Molecular Weight Distribution Of Polystyrene By Liquid Exclusion Chromatography (Gel Permeation Chromatography - Gpc)
ASTM D3536-91 Standard Test Method for Molecular Weight Averages And Molecular Weight Distribution Of Polystyrene By Liquid Exclusion Chromatography (Gel Permeation Chromatography - Gpc)
ASTM D3593-80(1986)e1 Test Method for Molecular Weight Averages and Molecular Weight Distribution of Certain Polymers by Liquid Size-Exclusion Chromatography (Gel Permeation Chromatography GPC) Using Universal Calibration
ASTM UOP437-81 Size Distribution of Molecular Sieve Particles
ASTM D6474-99 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D6474-99(2006) Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D6579-00 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography
ASTM D6474-12 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D5296-05 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM D6579-11(2020) Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography
ASTM D5296-11 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM D6474-19 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D6474-20 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D6579-06 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography
ASTM D6579-11 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography
ASTM D5296-97 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM D5296-19 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM D6579-11(2015) Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography
ASTM D7134-05 Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
ASTM E2834-12(2018) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM E2834-12(2022) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM D7134-05(2012) Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
ASTM E2834-12 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM E1438-06 Standard Guide for Measuring Widths of Interfaces in Sputter Depth Profiling Using SIMS

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, molecular weight distribution gpc

GB/T 27843-2011 Chemicals.Determination of the low molecular weight content of a polymer using Gel permeation chromatography (GPC)
GB/T 11465-1989 Temperature profile for electronic measuring instruments
GB 11465-1989 Thermal Profiles for Electronic Measuring Instruments
GB/T 6599-1986 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography
GB/T 36214.4-2018 Plastics.Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography.Part 4:High-temperature method
GB/T 21864-2008 Standard test method for molecular weight averages and molecular weight distribution of polystyrene.High performance size-exclusion chromatography
GB/T 36214.2-2018 Plastics.Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography.Part 2:Universal calibration method
GB/T 5910-1998 Passenger cars--Mass distribution
GB/T 31816-2015 Water treatment chemicals.Determination of the molecular weight and molecular weight distribution of polymers.Gel filtration chromatography
GB/T 42274-2022 Determination of the content and distribution of trace elements (magnesium, gallium) in aluminum nitride materials—Secondary ion mass spectrometry
GB/T 43196-2023 Nanotechnology Scanning Electron Microscopy to Measure Nanoparticle Size and Shape Distribution
GB/T 30787-2014 Binder Resin applied in digital printing materials.The determination average molecular weight and its distribution.Gel permeation chromatography
GB/T 1386.3-1997 Insulators for low voltage power lines. Part 3: Insulators for low voltage wiring
GB/T 14853.5-2002 Rubber compounding ingredients--Carbon black,pelletized--Determination of pellet size distribution

Korean Agency for Technology and Standards (KATS), molecular weight distribution gpc

KS F 2302-2002 Test method for particle size distribution of soils
KS F 2598-2011 Standard test method for distribution of total chloride ion in concrete
KS M ISO 16564:2007 Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS M ISO 16564-2007(2022) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS M ISO 16564-2007(2017) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS D ISO 17560-2003(2018)
KS W 0612-1984 Weight Distribution of Aircraft
KS R ISO 2416-2013(2018) Passenger cars－Mass distribution
KS M ISO 11344-2017(2022) Rubber, raw synthetic－Determination of the molecular－mass distribution of solution polymers by gel permeation chromatography
KS M ISO 11344:2007 Rubber, raw synthetic－Determination of the molecular－mass distribution of solution polymers by gel permeation chromatography
KS M ISO 11344:2017 Rubber, raw synthetic－Determination of the molecular－mass distribution of solution polymers by gel permeation chromatography
KS M ISO 78-4-2010(2020) Layouts for standards－Part 4：Standard for atomic absorption spectrometric analysis
KS M ISO 78-3-2010(2020) Chemistry－Layouts for standards－Part 3：Standard for molecular absorption spectrometry
KS K ISO 2648:2009 Wool－Determination of fibre length distribution parameters－Electronic method

Professional Standard - Commodity Inspection, molecular weight distribution gpc

SN/T 3002-2011 Determication of relative molecular weight and molecular weight distribution of polyethylene.Gel permeation chromatography method
SN/T 4183-2015 Determination of relative molecular weight and molecular weight distribution of polyolefins.High temperature gel permeation chromatography method

British Standards Institution (BSI), molecular weight distribution gpc

BS ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
BS ISO 16014-2:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Universal calibration method
BS ISO 16014-4:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. High-temperature method
BS ISO 16014-1:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. General principles
BS ISO 16014-3:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Low-temperature method
BS ISO 16014-4:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. High-temperature method
BS ISO 16014-3:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. Low-temperature method
BS ISO 16014-1:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. General principles
BS EN ISO 16014-5:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. Light-scattering method
BS EN ISO 16014-5:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Method using light-scattering detection
BS ISO 16014-2:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. Universal calibration method
BS EN ISO 10927:2011 Plastics. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
BS EN ISO 10927:2018 Plastics. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
BS 3406-8:1997 Methods for determination of particle size distribution. Photon correlation spectroscopy
BS ISO 11344:2004 Rubber, raw synthetic - Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
BS ISO 11344:2016 Rubber, raw synthetic. Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
BS ISO 19749:2021 Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
BS EN ISO 21363:2022 Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
BS EN ISO 19749:2023 Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
BS ISO 21363:2020 Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
BS 6943:1988 Classification of shapes of electronic components for placement on printed wiring boards
BS ISO 15900:2009 Determination of particle size distribution - Differential electrical mobility analysis for aerosol particles

Military Standard of the People's Republic of China-General Armament Department, molecular weight distribution gpc

GJB 1965-1994 Determination of molecular weight and molecular weight distribution of hydroxyl-terminated polybutadiene by gel permeation chromatography
GJB 1059.6-2020 Test methods for phenolic resins for ablative materials Part 6: Molecular weight and distribution testing

International Organization for Standardization (ISO), molecular weight distribution gpc

ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
ISO 16014-4:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method
ISO 16014-4:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method
ISO 16014-1:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 1: General principles
ISO 16014-2:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 2: Universal calibration method
ISO 16014-4:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method
ISO 16014-3:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method
ISO 16014-2:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 2: Universal calibration method
ISO 16564:2004/Amd 1:2006 Rubber, raw natural — Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) — Amendment 1
ISO 16014-1:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 1: General principles
ISO 16014-5:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 5: Light-scattering method
ISO/DIS 19430 Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
ISO 16014-3:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
ISO 16014-3:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
ISO 16014-1:2003 Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles
ISO 16014-2:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method
ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection
ISO 2416:1992 Passenger cars; mass distribution
ISO 16014-1:2003/Cor 1:2005 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 1: General principles; Technical Corrigendum 1
ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
ISO 11344:2004 Rubber, raw synthetic - Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
ISO 11344:2016 Rubber, raw synthetic - Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
ISO 19749:2021 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy
ISO 15900:2009 Determination of particle size distribution - Differential electrical mobility analysis for aerosol particles
ISO 10076:1991 Metallic powder; determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement
ISO 21501-3:2007 Determination of particle size distribution - Single particle light interaction methods - Part 3: Light extinction liquid-borne particle counter
ISO 21501-2:2007 Determination of particle size distribution - Single particle light interaction methods - Part 2: Light scattering liquid-borne particle counter
ISO 2648:1974 Wool; Determination of fibre length distribution parameters; Electronic method
ISO 11344:2004/Cor 1:2008 Rubber, raw synthetic - Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography; Technical Corrigendum 1

国家药监局, molecular weight distribution gpc

YY/T 1678-2019 Method for detecting molecular weight and molecular weight distribution of polylactic acid and its copolymers for surgical implants
YY/T 1795-2021 sperm quality analyzer

Aeronautical Radio Inc., molecular weight distribution gpc

ARINC 666-2002 Electronic Distribution of Software
ARINC 666 BOOK-2002 Electronic Distribution of Software

Group Standards of the People's Republic of China, molecular weight distribution gpc

T/SHXCL 000002-2019 Waterborne nanoscale narrow-band polymerized acrylic resin
T/CAMDI 076-2022 Gel chromatography method for molecular weight and distribution of polysulfone specialty for medical devices
T/CASAS 010-2019 Determination of Trace Impurities Concentration and Distribution in GaN Materials by Secondary Ion Mass Spectrometry

Professional Standard - Petrochemical Industry, molecular weight distribution gpc

SH/T 0108-1992 Determination of average molecular weight and molecular weight distribution of certain polymeric additives (Size Exclusion Chromatography)
SH/T 1759-2007 Determinaaonof the molecular.mass distribution of solution polpners by gel permeation chromatography
SH/T 0730-2004 Estimation of molecular weigh (relative molecular mass) of petroleum oils from viscosity measurements

未注明发布机构, molecular weight distribution gpc

BS ISO 16564:2004(2006) Rubber, raw natural — Determination of averagemolecularmass and molecular - mass distribution by size exclusion chromatography (SEC)
DIN EN ISO 21363:2022 Nanotechnologies – measurements of particle size and particle shape distributions using transmission electron microscopy

国家市场监督管理总局、中国国家标准化管理委员会, molecular weight distribution gpc

GB/T 36214.1-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 1:General principles
GB/T 36214.3-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method
GB/T 36214.5-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part5:Method using light-scattering detection
GB/T 39843-2021 Electronic characteristic measurements—Local critical current density and its distribution in large-area superconducting films

American National Standards Institute （ANSI), molecular weight distribution gpc

ANSI/ASTM D6474:1999 Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ANSI/ASTM D5296:1997 Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography, Test Method of (08.03)
ANSI C29.13-2012 Standards for Insulators - Composite Distribution Deadend Type

TH-TISI, molecular weight distribution gpc

TIS 2250.3-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 3: low.temperature method
TIS 2250.4-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 4: high.temperature method
TIS 2250.1-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 1: general principles
TIS 2250.2-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 2: universal calibration method

Japanese Industrial Standards Committee (JISC), molecular weight distribution gpc

JIS K 7252-1:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
JIS K 7252-3:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
JIS K 7252-4:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
JIS K 7252-3:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
JIS K 7252-4:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
JIS K 7252-1:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
JIS Z 8822:2001 Determination of particle size distribution by the mass of sediment-particles in liquid
JIS K 7252-2:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
JIS K 7252-2:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
JIS D 0050:1998 Passenger cars -- Mass distribution
JIS K 7252-5:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 5: Method using light-scattering detection
JIS W 0602:1984 Weight distribution of aircraft
JIS A 6009:1983 Synthetic polymeric roofing sheets laminated with cloth or others
JIS Z 8822:1990 Determination of particle size distribution by the weight of sedimentation in liquid

Indonesia Standards, molecular weight distribution gpc

SNI 03-3962-1995 Test method for light sediment grain distribution gravimetrically by sieves

Association Francaise de Normalisation, molecular weight distribution gpc

NF EN ISO 16014-5:2019 Plastiques - Détermination de la masse moléculaire moyenne et de la distribution des masses moléculaires de polymères par chromatographie d'exclusion stérique - Partie 5 : méthode par diffusion lumineuse
NF X21-003:2006 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry.
NF T30-711:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS).
NF T51-240-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5 : method using light-scattering method.
NF X21-004*NF ISO 22309:2012 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above.
NF EN ISO 10927:2018 Plastiques - Détermination de la masse moléculaire et de la distribution des masses moléculaires des polymères par spectrométrie de masse, à temps de vol, après désorption/ionisation laser assistée par matrice (SM-MALDI-TOF)
NF T51-241:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
NF T51-241:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS).
NF T16-404:2020 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy
NF T16-403*NF ISO 19749:2021 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy
NF T16-404*NF EN ISO 21363:2022 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy
NF R10-006:1994 Vehicles of categories M1 and N1. Mass distribution.
NF EN ISO 2871-1:2010 Agents de surface - Détergents - Détermination de la teneur en matière active cationique - Partie 1 : matière active cationique à haute masse moléculaire

German Institute for Standardization, molecular weight distribution gpc

DIN EN ISO 16014-5:2019-09 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019); German version EN ISO 16014-5:2019
DIN ISO 2416:1993 Passenger cars; mass distribution; identical with ISO 2416:1992
DIN EN ISO 16014-5:2019 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
DIN EN ISO 10927:2018-10 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018); German version EN ISO 10927:2018
DIN 55674:2006 Synthetic Polymers - Determination of molecular mass and molecular mass distribution of polymers by matrix assisted laser desorption/ionization-time-of-flight-mass spectrometry
DIN EN ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018)
DIN EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection (ISO 16014-5:2012); German version EN ISO 16014-5:2012
DIN 54407:2023-06 Testing of ion exchange resins - Determination of bead size distribution for mono- and heterodisperse ion exchange resins

ES-UNE, molecular weight distribution gpc

UNE-EN ISO 16014-5:2020 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
UNE-EN ISO 10927:2019 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018)
UNE-EN ISO 19749:2023 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021) (Endorsed by Asociación Española de Normalización in May of 2023.)
UNE-EN ISO 21363:2022 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020) (Endorsed by Asociación Española de Normalización in February of 2022.)

RU-GOST R, molecular weight distribution gpc

GOST R 25645.159-1994 Sporadic electron fluxes in near-earth space. Model of spatial-time and energy distribution
GOST 33418-2015 Testing of chemicals of environmental hazard. Determination of the Number-Average Molecular Weight and the Molecular Weight Distribution of Polymers using Gel Permeation Chromatography
GOST 25645.139-1986 Natural radiation belts of Earth. Model of spatial and energy distribution of electron flux
GOST 25645.138-1986 Natural radiation belts of earth. Model of spatial and energy distribution of proton flux
GOST R 57268.1-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 1. General principles
GOST R 57268.2-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 3. System calibration
GOST R 57268.3-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 3. Low-temperature method
GOST R 57268.4-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 4. High-temperature method
GOST R 8.775-2011 State system for ensuring the uniformity of measurements. Disperse composition of gas atmospheres. Determination of nano particle size by differential electrical mobility analysis for aerosol particles

农业农村部, molecular weight distribution gpc

NY/T 1860.35-2016 Test Guidelines for Determination of Physical and Chemical Properties of Pesticides Part 35: Determination of Polymer Molecular Weight and Molecular Weight Distribution (Gel Permeation Chromatography)

KR-KS, molecular weight distribution gpc

KS R ISO 2416-2013(2023) Passenger cars－Mass distribution
KS M ISO 11344-2017 Rubber, raw synthetic－Determination of the molecular－mass distribution of solution polymers by gel permeation chromatography
KS C ISO 19749-2023 Nanotechnologies — Measurements of particle size and shape distributions by scanning electron microscopy
KS C ISO 21363-2023 Nanotechnologies — Measurements of particle size and shape distributions by transmission electron microscopy

European Committee for Standardization (CEN), molecular weight distribution gpc

EN ISO 16014-5:2019 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection
EN ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)
EN ISO 19749:2023 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021)
prEN ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020)

Professional Standard - Chemical Industry, molecular weight distribution gpc

HG/T 4744-2014 Determination of average molecular weight and molecular weight distribution of photographic gelatin by GFC
HG/T 3872-2006 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography

Professional Standard - Agriculture, molecular weight distribution gpc

249药典三部-2020 Assay method 3128 Determination of molecular size distribution of antitoxin/antiserum products
210药典四部-2020 3100 Assay method 3128 Determination method for molecular size distribution of antitoxin/antiserum products

AT-ON, molecular weight distribution gpc

ONORM A 1650 Beib.2-1987 Chairs and tables for educationalinstitutions; distribution-survey
OENORM EN ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020)

Danish Standards Foundation, molecular weight distribution gpc

DS/EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection
DS/EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
DS/ISO 19749:2021 Nanotechnologies – Measurements of particle size and shape distributions by scanning electron microscopy

National Electrical Manufacturers Association（NEMA), molecular weight distribution gpc

NEMA C29.13-2000 Insulators - Composite - Distribution Deadend Type
NEMA C29.18-2003 for Insulators Composite Distribution Line Post Type

Standard Association of Australia （SAA）, molecular weight distribution gpc

AS ISO 17560:2006 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth profiling of boron in silicon

PH-BPS, molecular weight distribution gpc

PNS ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., molecular weight distribution gpc

ASHRAE 4284-1999 CFD Modeling and Measurement of Aerosol Particle Distributions in Ventilated Multizone Rooms

Institute of Interconnecting and Packaging Electronic Circuits (IPC), molecular weight distribution gpc

IPC TM-650 5.1.422-1975 Analysis of Glass Fabrics for Chrome Content

GOSTR, molecular weight distribution gpc

GOST R 57268.5-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 5. Method using light-scattering detection

Lithuanian Standards Office , molecular weight distribution gpc

LST EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection (ISO 16014-5:2012)
LST EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)

AENOR, molecular weight distribution gpc

UNE-EN ISO 16014-5:2013 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection (ISO 16014-5:2012)
UNE-EN ISO 10927:2012 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)
UNE 28006:1954 WEIGHT DISTRIBUTION IN CIVIL TRANSPORT AIRCRAFTS.

Professional Standard - Electricity, molecular weight distribution gpc

DL/T 1569-2016 Guidelines for measuring distribution voltage of insulator strings in AC transmission lines of 750kV and above
DL/T 890.453-2018 Energy Management System Application Programming Interface (EMS-API) Part 453: Graphical Layout Subset

Chongqing Provincial Standard of the People's Republic of China, molecular weight distribution gpc

DB50/T 1328-2022 Gardenia seed quality grading

Taiwan Provincial Standard of the People's Republic of China, molecular weight distribution gpc

CNS 10143-1983 Synthetic Polymer Roofing Sheets for Waterproof
CNS 10145-1983 Synthetic Polymer Roofing Sheets Laminated with Cloth and Others
CNS 10144-1983 Method of Test for Synthetic Polymer Roofing Sheets for Waterproof
CNS 10146-1983 Method of Test for Synthetic Polymer Roofing Sheets Laminated with Cloth and Others

U.S. Military Regulations and Norms, molecular weight distribution gpc

ARMY MIL-PRF-32001-1997 FAN, CIRCULATING - HEAT DISTRIBUTION, SELF- POWERED

IT-UNI, molecular weight distribution gpc

RO-ASRO, molecular weight distribution gpc

STAS 12235-1984 PLUSHED FABRICS AND TERRIES Mass assignement on plush square meter
STAS SR ISO 8130-1:1994 Coating powders - Part 1: Determination of partide size distribution by sieving
SR ISO 78-3:1995 Chemistry - Layouts for standards - Part 3: Standard for molecular absorption spectrometry

ES-AENOR, molecular weight distribution gpc

INTA 80 01 01

International Commission on Illumination (CIE), molecular weight distribution gpc

CIE 70-1987 Measurement of Absolute Luminous Intensity Distributions (E)

Professional Standard - Ocean, molecular weight distribution gpc

HY/T 156-2013 Drawing method of ocean wave energy distribution

工业和信息化部, molecular weight distribution gpc

QB/T 5618-2021 Measurement method of office chair body pressure distribution

IN-BIS, molecular weight distribution gpc

IS 7610 Pt.4-1976

PL-PKN, molecular weight distribution gpc

PN BN 6391-01-1964

International Telecommunication Union (ITU), molecular weight distribution gpc

ITU-T J.706-2012 (Pre-Published) The overview of target content distribution

Professional Standard - Machinery, molecular weight distribution gpc

JB/T 56073.11-1999 Alkyd glass varnish product quality classification
JB/T 56073.12-1999 Quality classification of polyester varnished glass cloth
JB/T 10585.3-2006 Insulators for low voltage power lines.Part 3: Insulators for low voltage wiring

CZ-CSN, molecular weight distribution gpc

CSN 64 0907-1989 Plastics. Ion exchangers. Distribution and determination size of particles

SE-SIS, molecular weight distribution gpc

SIS SS 11 11 15-1985 Steel - Method for assessing the slag inclusion content - Microscopic methods - Manual counting of particles and calculation of size-distribution