ZH
RU
ES

One to the 10,000th power

One to the 10,000th power, Total:318 items.

In the international standard classification, One to the 10,000th power involves: Non-metalliferous minerals, Metalliferous minerals, Quality, Paper and board, Machine tools, Data storage devices, Protection against fire, Furniture, Home textiles. Linen, Laboratory medicine, Colour coding, Products of the textile industry, Refractories, Chipless working equipment, Acoustics and acoustic measurements, Ergonomics, Welding, brazing and soldering, Hospital equipment, Road vehicles in general, Rubber and plastics products, Floor treatment appliances, Farming and forestry, Interface and interconnection equipment, Wood, sawlogs and sawn timber, Vibration and shock with respect to human beings, Microbiology, Vibrations, shock and vibration measurements, Applications of information technology, Medical equipment, Optoelectronics. Laser equipment, Radiation protection, Protective equipment, Elements of buildings, Document imaging applications, Fuels, Paints and varnishes, Meat, meat products and other animal produce, Graphic technology, Protection of and in buildings, Testing of metals, Plastics, Solar energy engineering, Law. Administration, Analytical chemistry, Construction materials, Radiation measurements, Alarm and warning systems, Galvanic cells and batteries, Corrosion of metals, Sports equipment and facilities, Wood-based panels, Air quality, Information sciences. Publishing, Electronic components in general, Metrology and measurement in general, Non-ferrous metals, Edible oils and fats. Oilseeds, Telecommunication services. Applications, Audio, video and audiovisual engineering, Environmental testing, Raw materials for rubber and plastics, Tobacco, tobacco products and related equipment, Geology. Meteorology. Hydrology, Mining equipment, Radiocommunications, Non-textile floor coverings, Pharmaceutics, CHEMICAL TECHNOLOGY.

CZ-CSN, One to the 10,000th power

CSN ISO 8875:1992 Fluorspar - Determination of moisture content of a lot
CSN ISO 3087:1994 Iron ores. Determination of moisture content of a consignment
CSN ISO 7145:1994 Determination of flowrate of fluids in closed conduits of circular cross-section.Method of velocity measurement at one point of the cross-section
CSN 01 1604-1989 Noise. Determination of the sound power level of noise of machines in a free field over a reflecting plane. Engineering method

AENOR, One to the 10,000th power

UNE 66048:1978 COMPARISON OF THE MEANS OF TWO LOTS (KNOW VARIANCES)
UNE 66052:1978 COMPARISON OF THE MEANS OF TWO LOTS (VARIANCES UNKNOWN, BUT MAY BE ASSUMED EQUAL)
UNE-EN 50332-2:2014 Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 2: Matching of sets with headphones if either or both are offered separately, or are offered as one packa
UNE 53231-1:2011 Plastics. Core of flexible polyurethane (PUR) foams for mattresses. Characteristics and test methods. Part1: Core with one or several non viscoelastic foams layers
UNE-EN 15964:2012 Breath alcohol test devices other than single use devices - Requirements and test methods

Japanese Industrial Standards Committee (JISC), One to the 10,000th power

JIS Z 9056:1979 Significance test of equality of the two population variances (one-sided)
JIS P 8127:2010 Paper and board -- Determination of moisture content of a lot -- Oven-drying method

Korean Agency for Technology and Standards (KATS), One to the 10,000th power

KS B 0703-2002(2017) Method of test for dynamic vibration of two - for - one twister
KS X ISO/IEC 13403-2014(2020) Information technology — Information interchange on 300 mm optical disk cartridges of the write once, read multiple(WORM) type using the CCS method
KS B 4304-2020 Mechanical presses — Methods of measurement of sound level
KS X ISO/IEC 13614-2013(2019) Information technology－Interchange on 300 mm optical disk cartridges of the write once, read multiple (WORM) type using the SSF method
KS K 9072-2019 Textiles — Test method for disposable nonwovens — Determination of water absorption property
KS X ISO/IEC TR 10091-2001(2016) Information technology — Technical aspects of 130 mm optical disk cartridge write-once recording format
KS K 0753-1998 TESTING METHOD FOR TENSILE PROPERTIES OF GEOSYNTHETICS BY WIDE-WIDTH STRIP
KS X ISO/IEC 20162-2014(2020) Information technology — Data interchange on 300 mm optical disk cartridges of type WORM(Write Once Read Many) using irreversible effects — Capacity: 30 Gbytes per cartridge
KS X ISO/IEC TR 10091-2001(2021) Information technology — Technical aspects of 130 mm optical disk cartridge write-once recording format
KS M 3029-1980(2001) TEST METHOD FOR TEAR PROPAGATION RESISTANCE OF PLASTIC FILM AND THIN SHEETING BY A SINGLETEAR METHOD
KS K 9071-2019 Textiles — Test method for disposable nonwovens — Determination of moisture drying time
KS B ISO 5347-7:2014 Methods for the calibration of vibration and shock pick-ups — Part 7: Primary calibration by centrifuge
KS B ISO 5347-8:2014 Methods for the calibration of vibration and shock pick-ups — Part 8: Primary calibration by dual centrifuge
KS B 0713-7-2001 Methods for the calibration of vibration and shock pick-ups-Part 7 : Primary calibration by centrifuge
KS C IEC 60286-1-2003(2008) Packaging of components for automatic handling－Part 1：Tape packaging of components with axial leads on continuous tapes
KS B 0713-8-2001 Methods for the calibration of vibration and shock pick-ups-Part 8 : Primary calibration by dual centrifuge
KS B 0713-2-2012 Methods for the calibration of vibration and shock pick-ups－Part 2 : Primary shock calibration by light cutting
KS H ISO TS 7821:2007 Tobacco and tobacco products－Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
KS H ISO TS 7821:2017 Tobacco and tobacco products－Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
KS H ISO TS 7821-2017(2022) Tobacco and tobacco products－Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
KS B ISO 5347-20_2001:2012 Methods for the calibration of vibration and shock pick-ups－Part 20：Primary vibration calibration by the reciprocity method

RO-ASRO, One to the 10,000th power

STAS 6679/14-1985 Metal cutt ing machinc-tools METHODS OF TESTING THE QUARENNESS OF AN AXIS TO HE FRONT SURFACE
STAS 11200/22-1978 Graphical symbols GRAPHICAL SYMBOL FOR MOVEMENT IN ONE DIRECTION
STAS 6679/7-1985 Metal cutting machine-tools PARALIELISM OF THE AXIS TO A PLANE CHEKING UP METHODS
STAS 6679/4-1985 Metal cutting maehinc-tools METHODE CHECKING PABAL- LELISM OF THE MOVING BODY BIRECTION TO A PLANE OR AN AXIS
STAS 6679/18-1985 Metal cutting machine-tools CHECKING METHODS OF ANGULAR POSITION CONSTANCY OF A MOVING WORKING ELEMENT
STAS 6679/5-1985 Metal cutting mncline-tools METHODE DE simuiLtanEous CHE-CKING STHHIGHTNESS AND PAHALLELISM OF THE MOY1NG BODY DIREC.TION OF MOVEMENT TO A l'l.ANIi OH AN AXIS
STAS 6679/12-1985 Metal cutting machine-tools COMPLEX CHECKING METHODS OF THE STRAIGHTNESS AND PERPENDICULAR ALIGNEMENT OF A WORKING ELEMENT MOVTNG DIRECTION AGAINST A PLANE OR AN AXIS

PL-PKN, One to the 10,000th power

PN M55551-21-1986 Metal cutting machin? tools Methods of measurement of squareness of a motion to a motion
PN M55551-15-1987 Metal cutting machin? tools ethods of measurement the arallelism of an ax*s to a piane
PN Z55202-1991 Medical equipment. Transfusion sets for single use. Requirements and test methods
PN M55551-20-1986 Metal cutting, machin? tools ethods of measurement position ngulaY stability of a componeW f a machin? tool
PN M55551-07-1986 Metal cutting machin? tools ethods of measurement of straightness nd parallelism of a motion o the reference surface or axis

Canadian Standards Association (CSA), One to the 10,000th power

CAN/CSA-Z617-2006 Personal protective equipment (PPE) for blunt trauma (First Edition; Update No 1: July 2007)
CAN/CSA-C875-2013 Performance of general service directional lamps (First Edition; Update No. 1: July 2014)
CAN/CSA-ISO/IEC 20162:2004 Information technology - Data interchange on 300 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects - Capacity: 30 Gbytes per cartridge
CAN/CSA-ISO/IEC 13614:2000 Information technology - Interchange on 300 mm optical disk cartridges of the write once, read multiple (WORM) type using the SSF method
CSA C22.2 NO.211.0-2003 General requirements and methods of testing for nonmetallic conduit (Second Edition; Update No 1: January 2005; Update No 2: September 2006; Update No 3: May 2011)
CAN/CSA-A123.24-2015 Standard test method for wind resistance of modular vegetated roof assembly (First Edition; Update No. 1: September 2015)
CAN/CSA-P.9-2011 Test method for determining the performance of combined space and water heating systems (combos) (First Edition; Update No. 1: March 2012)

British Standards Institution (BSI), One to the 10,000th power

BS 6807:1986 Methods of test for the ignitability of mattresses with primary and secondary sources of ignition
BS ISO 16063-17:2016 Methods for the calibration of vibration and shock transducers. Primary calibration by centrifuge
BS ISO/IEC 10373-1:2020 Cards and security devices for personal identification. Test methods - General characteristics
PD ISO/TS 19930:2017 Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6
BS EN 455-2:1995 Medical gloves for single use. Specification for physical properties
BS 6807:2006 Methods of test for assessment of ignitability of mattresses, upholstered divans and upholstered bed bases with flaming types of primary and secondary sources of ignition
BS DD ISO/TS 10128:2010 Graphic technology - Methods of adjustment of the colour reproduction of a printing system to match a set of characterization data
BS ISO/IEC 29183:2011 Information technology. Office equipment. Method for measuring digital copying productivity of a single one-sided original
BS EN 15964:2011 Breath alcohol test devices other than single use devices. Requirements and test methods
BS EN 50604-1:2016+A1:2021 Secondary lithium batteries for light EV (electric vehicle) applications - General safety requirements and test methods
BS EN 14225-4:2005 Diving suits - Part 4: One atmosphere suits (ADS) - Human factors requirements and test methods
BS 684-2.43:1989 Methods of analysis of fats and fatty oils. Other methods. Determination of polyunsaturated fatty acids with a cis,cis 1, 4-diene structure
BS EN 50332-2:2013 Sound system equipment: Headphones and earphones associated with personal music players. Maximum sound pressure level measurement methodology. Matching of sets with headphones if either or both are offered separately, or are offered as one package equipme
BS DD ISO/TS 7821:2005 Tobacco and tobacco products - Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
BS EN ISO 11810:2015 Lasers and laser-related equipment. Test method and classification for the laser resistance of surgical drapes and/or patient protective covers. Primary ignition, penetration, flame spread and secondary ignition
19/30335596 DC BS ISO/IEC 10373-1. Cards and security devices for personal identification. Test methods. Part 1. General characteristics
BS EN 13329:2006+A1:2008 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
22/30445404 DC BS ISO/IEC 10373-1 AMD1. Cards and security devices for personal identification. Test methods - Part 1. General characteristics
BS EN 13329:2016+A2:2021 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
DD ISO/TS 7821:2005 Tobacco and tobacco products. Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods

ECMA - European Association for Standardizing Information and Communication Systems, One to the 10,000th power

ECMA 350-2003 Data Interchange on 130 mm Rewritable and Write Once Read Many Ultra Density Optical (UDO) Disk Cartridges - Capacity: 30 Gbytes per Cartridge - First Generation (First Edition)

CU-NC, One to the 10,000th power

NC 90-04-09-1984 Metrological Assurance. One Mark and Two Marks Flasks for General Use. Verification Methods and Means

AR-IRAM, One to the 10,000th power

IRAM 5541-1953

American Society for Testing and Materials (ASTM), One to the 10,000th power

ASTM E1380-90(1999)e1 Standard Specification for Color Coding of Laboratory Pipets with Multiple Graduations, 0.1 mL and Larger, But Excluding Disposable Prothrombin and Disposable Micropipets
ASTM E1380-90(2021) Standard Specification for Color Coding of Laboratory Pipets with Multiple Graduations, 0.1 mL and Larger, But Excluding Disposable Prothrombin and Disposable Micropipets
ASTM C288-87(2002) Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
ASTM C288-87(2009) Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
ASTM E1106-07 Standard Test Method for Primary Calibration of Acoustic Emission Sensors
ASTM F2371-10 Standard Test Method for Measuring the Heat Removal Rate of Personal Cooling Systems Using a Sweating Heated Manikin
ASTM E3251-23 Standard Test Method for Microbial Ingress Testing on Single-Use Systems
ASTM E3336-22 Standard Test Method for Physical Integrity Testing of Single-Use Systems
ASTM E1362-15(2019) Standard Test Methods for Calibration of Non-Concentrator Photovoltaic Non-Primary Reference Cells
ASTM E3251-20 Standard Test Method for Microbial Ingress Testing on Single-Use Systems
ASTM F494-05(2016) Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
ASTM E1748-95 Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
ASTM E1748-95(2017) Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
ASTM E1414/E1414M-11a Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
ASTM D4273-18 Standard Test Methods for Polyurethane Raw Materials Determination of Primary Hydroxyl Content of Polyether Polyols
ASTM F494-93(1998) Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
ASTM F494-05 Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
ASTM F494-93(2004) Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
ASTM F494-05(2022) Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
ASTM D5084-10 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
ASTM E1748-95(2001) Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
ASTM E1748-95(2009) Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
ASTM D1938-06 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM D1938-02 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM D1938-94 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM D1938-08 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM D7095-17 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
ASTM E1333-10 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber
ASTM D7095-23 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
ASTM E1414-00a Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
ASTM E1414-06 Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
ASTM E1414/E1414M-11 Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
ASTM E1414/E1414M-11ae1 Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
ASTM D7095-04(2014) Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
ASTM D7095-04 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
ASTM D7095-04(2009) Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
ASTM D1938-14 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM C1579-06 Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)
ASTM D6391-99 Standard Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole
ASTM D6391-99(2004) Standard Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole
ASTM E2093-00 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
ASTM E2093-05 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
ASTM D6689-01(2011) Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
ASTM F2547-06 Standard Test Method for Determining the Attenuation Properties in a Primary X-ray Beam of Materials Used to Protect Against Radiation Generated During the Use of X-ray Equipment
ASTM F2547-06(2013) Standard Test Method for Determining the Attenuation Properties in a Primary X-ray Beam of Materials Used to Protect Against Radiation Generated During the Use of X-ray Equipment
ASTM F2547-18 Standard Test Method for Determining the Attenuation Properties in a Primary X-ray Beam of Materials Used to Protect Against Radiation Generated During the Use of X-ray Equipment

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, One to the 10,000th power

GB/T 6378.1-2008 Sampling procedures for inspection by variables.Part1:Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
GB/T 25300-2010 Resistance welding equipment.Particular specifications applicable to transformers with one secondary winding for multi-spot welding,as used in the automobile industry
GB/T 13823.14-1995 Methods for the calibration of vibration and shock pick-ups. Primary calibration by centrifuge
GB/Z 20648-2006 Electronic imaging-Recommendations for the expungement of information recorded on write-once optical media
GB/T 13823.13-1995 Methods for calibration of vibration and shock pick-ups. Primary shock calibration by light cutting
GB/T 13823.11-1995 Methods for the calibration of vibration and shock pick-ups. Primary vibration calibration by laser interferometry at low frequencies
GB/T 13823.2-1992 Methods for the calibration of vibration and shock pick-ups. Primary vibration calibration by laser interferometry

IT-UNI, One to the 10,000th power

German Institute for Standardization, One to the 10,000th power

DIN 53835-14:1992 Testing of textiles; tensile test for testing the elastic behaviour; knitted fabrics, single strain between two force limits
DIN 53835-13:1983 Testing of textiles; determination of the elastic behaviour of textile fabrics by a single application of tensile load between constant extension limits
DIN EN ISO 9004:2009 Managing for the sustained success of an organization - A quality management approach (ISO 9004:2009); Trilingual version EN ISO 9004:2009
DIN 31631-5:1988 Data element catalogue for bibliographic data; handling of data categories with one entry or more entries in data formats
DIN EN 13384-1:2019-09 Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating combustion; German version EN 13384-1:2015+A1:2019
DIN ISO/TS 22475-3:2008 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 3: Conformity assessment of enterprises and personnel by third party (ISO/TS 22475-3:2007); German version CEN ISO/TS 22475-3:2007
DIN EN ISO 11810:2016-06 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition (ISO 11810:2015); German version EN IS...
DIN 58909-1:2000 Haemostaseology - Determination of factor VIII coagulant activity (F VIII C) - Part 1: Reference measurement procedure for the one-stage method
DIN 58901-1:2000 Haemostaseology - Determination of factor VII coagulant activity (F VII C) - Part 1: Reference measurement procedure for the one-stage method
DIN EN ISO 11810:2016 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition (ISO 11810:2015)

HU-MSZT, One to the 10,000th power

CEN - European Committee for Standardization, One to the 10,000th power

EN ISO 9004:2018 Quality management - Quality of an organization - Guidance to achieve sustained success
EN ISO 23907-1:2019 Sharps injury protection - Requirements and test methods - Part 1: Single-use sharps containers

Association Francaise de Normalisation, One to the 10,000th power

NF X50-122:2009 Managing for the sustained success of an organization - A quality management approach.
NF ISO 12963:2017 Analyse des gaz - Méthodes de comparaison pour la détermination de la composition des mélanges de gaz basées sur un ou deux points d'étalonnage
NF EN ISO 15792-2:2020 Produits consommables pour le soudage - Méthodes d'essai - Partie 2 : préparation de pièces d'essai et d'éprouvettes en une ou deux passes en acier
XP CEN/TS 17174:2018 Aliments des animaux : Méthodes d'échantillonnage et d'analyse - Critères de performance pour les méthodes d'analyse validées par un ou plusieurs laboratoires pour le dosage des métaux lourds
NF X06-029:1989 STATISTICS APPLICATION. LOT RECEIVING INSPECTION. DECISION RULES APPLICABLE TO THE INSPECTION OF A LOT,THE ITEMS OF WHICH POSSESS SEVERAL INDEPENDENT CHARACTERISTICS TO WHICH STATISTICAL SAMPLING SCHEMES ARE APPLIED.
NF EN ISO 24998:2009 Matériel de laboratoire en matière plastique - Boîtes de Petri à usage unique pour méthodes microbiologiques
NF ISO 12963/A1:2021 Analyse des gaz - Méthodes de comparaison pour la détermination de la composition des mélanges de gaz basées sur un ou deux points d'étalonnage - Amendement 1 : correction de la Formule 5
NF S97-002:1995 MEDICAL GLOVES FOR SINGLE USE. PART 2 : REQUIREMENTS AND TESTING FOR PHYSICAL PROPERTIES. (EUROPEAN STANDARD EN 455-2).
NF S97-003:2007 Medical gloves for single use - Part 3 : requirements and testing for biological evaluation.
NF S97-001-3*NF EN 455-3:2015 Medical gloves for single use - Part 3 : requirements and testing for biological evaluation
NF X20-703*NF EN 15964:2011 Breath alcohol test devices other than single use devices - Requirements and test methods
NF P51-002-1/IN1*NF EN 13384-1/IN1:2019 Chimneys - Thermal and fluid dynamic calculation methods - Part 1 : chimneys serving one combustion appliance
NF P51-002-1*NF EN 13384-1+A1:2019 Chimneys - Thermal and fluid dynamic calculation methods - Part 1 : chimneys serving one combustion appliance
NF EN ISO 23907-1:2019 Protection contre les blessures par perforants - Exigences et méthodes d'essai - Partie 1 : conteneurs à usage unique pour objets piquants ou coupants
NF EN ISO 11334-4:1999 Aides à la marche manipulées avec un bras - Exigences et méthodes d'essai - Partie 4 : cannes de marche avec au moins trois jambes ou plus.
NF X06-026:1987 Contrôle par comptage de la proportion d'individus non conformes ou du nombre moyen de non-conformités par unité - Méthodes générales pour la construction d'un plan d'échantillonnage
NF S97-132*NF EN ISO 11810:2016 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition
NF C58-604-1*NF EN 50604-1:2016 Secondary lithium batteries for light EV (electric vehicle) applications - Part 1 : general safety requirements and test methods
NF C58-604-1/A1*NF EN 50604-1/A1:2021 Secondary lithium batteries for light EV (electric vehicle) applications - Part 1 : general safety requirements and test methods

ZA-SANS, One to the 10,000th power

SANS 9004:2010 Managing for the sustained success of an organization - A quality management approach
SANS 16063-13:2008 Methods for the calibration of vibration and shock transducers Part 13: Primary shock calibration using laser interferometry

European Committee for Standardization (CEN), One to the 10,000th power

EN ISO 9004:2009 Managing for the sustained success of an organization - A quality management approach (ISO 9004:2009)
prEN 455-2-1991 Medical gloves for single use; part 2: requirements and testing for physical properties
EN 14225-4:2005 Diving suits - Part 4: One atmosphere suits (ADS) - Human factors requirements and test methods
EN ISO 14956:2002 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty ISO 14956: 2002
EN ISO 17468:2016 Microbiology of the food chain - Technical requirements and guidance on establishment or revision of a standardized reference method
EN ISO 3744:1995 Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Engineering Method in an Essentially Free Field Over a Reflecting Plane (ISO 3744 : 1994)
EN 1097-5:1999 Test for Mechanical and Physical Properties of Aggregates - Part 5: Determination of the Water Content by Drying in a Ventilated Oven

IX-ECMA, One to the 10,000th power

ECMA 189-1993 Information Interchange on 300 mm Optical Disk Cartridges of the Write Once, Read Multiple (Worm) Type Using the SSF Method
ECMA 190-1993 Information Interchange on 300 mm Optical Disk Cartridges of the Write Once, Read Multiple (Worm) Type Using the CCS Method

North Atlantic Treaty Organization Standards Agency, One to the 10,000th power

STANAG 4300-1993 TEST PROCEDURES FOR ASSESSING THE QUALITY OF ALUMINIUM POWDER FOR USE IN EXPLOSIVE FORMULATION FOR DELIVERIES FROM ONE NATO NATION TO ANOTHER

IX-EU/EC, One to the 10,000th power

COM(86) 584-1986 Proposal for a Council Directive Amending for the First Time Directive 83/183/EEC on Tax Exemptions Applicable to Permanent Imports from a Member State of the Personal Property of Individuals
COM(2001) 248-2001 Council Decision Establishing Training, Exchange & Assistance Programme for Protection of the Euro Against Counterfeiting ("Pericles" Programme); Council Decision Extending the Effects of Decision Establishing Training, Exchange & Assistance Programme for
85/490/EEC-1985 Fourth Commission Directive on the Approximation of the Laws of the Member States Relating to Methods of Analysis Necessary for Checking the Composition of Cosmetic Products

SE-SIS, One to the 10,000th power

SIS SS 3148-1987 Technical drawings - Symbols for parting, direction and first clamping

American Gear Manufacturers Association, One to the 10,000th power

AGMA 95FTM6-1995 Development of an Epicyclic Gearbox for Reduced Sub-Synchronous Vibrations in Gas Turbo-Generator Sets

Professional Standard - Post and Telecommunication, One to the 10,000th power

YD/T 2458-2013 Service test method based on unified IMS Personalized ring tone service (first stage)

Danish Standards Foundation, One to the 10,000th power

DS/ISO/IEC 13614:1996 Information technology - Interchange on 300 mm optical disk cartridges of the write once, read multiple (WORM) type using the SSF method
DS/ISO/IEC 13403:1996 Information technology - Information interchange on 300 mm optical disk cartridges of the write once, read multiple (WORM) type using the CCS method
DS/ISO 10843/Corr. 1:2009 Acoustics - Methods for the description and physical measurement of single impulses or series of impulses
DS/ISO 10843:1998 Acoustics - Methods for the description and physical measurement of single impulses or series of impulses
DS/EN 61427:2005 Secondary cells and batteries for photovoltaic energy systems (PVES) - General requirements and methods of test
DS/EN 15964:2011 Breath alcohol test devices other than single use devices - Requirements and test methods
DS/ETS 300791:1998 Network Aspects (NA) - Universal Personal Telecommunication (UPT) - Security architecture for UPT Phase 2 - Conformance Test Specification (CTS)

International Telecommunication Union (ITU), One to the 10,000th power

ITU-R S.744 FRENCH-1992 Orbit/Spectrum Improvement Measures for Satellite Networks Having More Than One Service in One or More Frequency Bands
ITU-R S.744 SPANISH-1992 Orbit/Spectrum Improvement Measures for Satellite Networks Having More Than One Service in One or More Frequency Bands
ITU-R QUESTION 230/1-2004 Improved measurement methods for unwanted emissions of primary radars using magnetrons
ITU-R QUESTION 2301-2004 Improved measurement methods for unwanted emissions of primary radars using magnetrons
ITU-T G.791-1988 General Considerations on Transmultiplexing Equipments - General Aspects of Digital Transmission Systems; Terminal Equipments (Study Groups XV and XVIII) 2 pp
ITU-R BR.1216-1 FRENCH-2001 Recording of Television or Sound Programmes on Magnetic Tape in the Case When Several Programmes are Intended for Broadcasting in the Same Digital Multiplex
ITU-R BR.1216-1 SPANISH-2001 Recording of television or sound programmes on magnetic tape in the case when several programmes are intended for broadcasting in the same digital multiplex
ITU-T H.833-2015 Conformance of ITU-T H.810 personal health devices: WAN interface Part 3: SOAP/ATNA: Sender
ITU-T H.837-2015 Conformance of ITU-T H.810 personal health devices: WAN interface Part 7: Consent management: Sender
ITU-T H.830.5-2016 Conformance of ITU-T H.810 personal health devices: WAN interface Part 5: PCD-01 HL7 messages: Sender
ITU-T H.835-2015 Conformance of ITU-T H.810 personal health devices: WAN interface Part 5: PCD-01 HL7 messages: Sender
ITU-T H.830.3-2015 Conformance of ITU-T H.810 personal health devices: WAN interface Part 3: SOAP/ATNA: Sender (Study Group 16)
ITU-R BT.1126-1994 Data Transmission Protocols and Transmission Control Scheme for Data Broadcasting Systems Using a Data Channel in Satellite Television Broadcasting
ITU-T H.830.7-2015 Conformance of ITU-T H.810 personal health devices: WAN interface Part 7: Consent management: Sender (Study Group 16)
ITU-T H.830.5-2015 Conformance of ITU-T H.810 personal health devices: WAN interface Part 5: PCD-01 HL7 messages: Sender (Study Group 16)
ITU-T H.830.9-2015 Conformance of ITU-T H.810 personal health devices: WAN interface Part 9: hData observation upload: Sender (Study Group 16)

IN-BIS, One to the 10,000th power

IS 8437 Pt.1-1993 Guide on effects of current passing through the human body. Part 1: General aspects (First Revision)
IS 10280-1993 Earth-moving machinery. Operation and maintenance. Format and content of manuals (First Revision)
IS 2720 Pt.19-1992 Methods of test for soils. Part 18: Determination of cemtrofige ,postire equivalent (First Revision)
IS 11611-1992 Fire test for valves (including soft seated quarter turn valve). Method of test (First Revision)
IS 4020-1992 Methods of tests for wooden flush door shutters: type tests (First Revision)
IS 4495-1992 Cinematography. Light output of narrow gauge film projectors. Method of measurement (First Revision)
IS 11114 Pt.3-1993 Earth-moving machinery. Definitions of dimensions and symbols. Part 3: Equipment (First Revision)
IS 8437 Pt.2-1993 Guide on effects of current passing through the human body. Part 2: Special aspects (First Revision)
IS 2720 Pt.18-1992 Methods of test for soils. Part 18: Determination of field moisture equivalent (First Revision)
IS 11114 Pt.2-1993 Earth-moving machinery. Definitions of dimensions and symbols. Part 2: Base machine (First Revision)
IS 11115-1993 Earth-moving machinery. Human physical dimensions of operators and minimum operator space envelope (First Revision)
IS 11114 Pt.4-1993 Earth-moving machinery. Definitions of dimensions and symbols. Part 4: Loaders. Terminology and commercial specificaiton (First Revision)
IS 11738 Pt.1-1993 Bulk handling equipment. Crawler tractors. Data sheet. Part 1: Information to be supplied by purchaser (First Revision)

RU-GOST R, One to the 10,000th power

GOST EN 455-1-2014 Medical gloves for single use. Part 1. Method for determination of tightness
GOST EN 455-2-2014 Medical gloves for single use. Part 2. Method for determination of physical-mechanical properties
GOST 22617.4-1991 Beet seeds. Methods for determinations of 1000 seeds mass and one sowing unit mass
GOST 16483.18-1972 Wood. Method for determination the number of annual rings in 1 cm and content of latewood in an annual ring
GOST 22967-1990 Injection medical syringes of repeatid application. General technical requirements and test methods
GOST 12.4.172-1987 Occupational safety standards system. Individual screen set for protection from power frequency fields. General technical requirements and methods of control
GOST R 53966-2010 Non-destructive testing. Evaluation of mechanical stresses in constructions material. General requirements for the order of methods choice
GOST R IEC 1066-1993 Thermoluminescene dosimetry systems for personal and environmental monitoring. General technical requirements and test methods
GOST R 12.4.246-2008 Occupational safety standards system. Personal protective means of hands. Gloves. General technical requirements. Test methods
GOST ISO 8537-2011 Sterile single-use syringes, with or without needle, for insulin. Technical requirements and test methods
GOST R 8.736-2011 State system for ensuring the uniformity of measurements. Multiple direct measurements. Methods of measurement results processing. Main principles
GOST 28213-1989 Basic environmental testing prosedures. Part 2. Tests. Test Ea and guidance: Shock
GOST R 12.4.225-1999 Occupational safety standards system. Personal protective equipment against falls from a height. Connectors. General technical requirements. Methods of testing

The American Road & Transportation Builders Association, One to the 10,000th power

AASHTO T 242-1996 Standard Method of Test for Frictional Properties of Paved Surfaces Using a Full-Scale Tire

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, One to the 10,000th power

QUESTION 230/1-2004 Improved measurement methods for unwanted emissions of primary radars using magnetrons

European Telecommunications Standards Institute (ETSI), One to the 10,000th power

ETSI TS 125 307-2005 Universal Mobile Telecommunications System (UMTS); Requirements on UEs supporting a release-independent frequency band 3GPP TS 25.307 version 6.2.0 Release 6
ETSI TS 125 307-2001 Universal Mobile Telecommunications System (UMTS); Requirements on UE Supporting a Release-Independent Frequency Band 3GPP TS 25.307 Version 4.0.0 Release 4
ETSI TS 125 307-2002 Universal Mobile Telecommunications System (UMTS); Requirements on UEs Supporting a Release-Independent Frequency Band 3GPP TS 25.307 Version 5.0.0 Release 5
ETSI TS 125 307-2004 Universal Mobile Telecommunications System (UMTS); Requirements on UEs supporting a release-independent frequency band 3GPP TS 25.307 version 5.3.0 Release 5
ETSI TS 125 307-2007 Universal Mobile Telecommunications System (UMTS); Requirements on User Equipments (UEs) supporting a release-independent frequency band V4.9.0; 3GPP TS 25.307 version 4.9.0 Release 4
ETSI TS 125 307-2008 Universal Mobile Telecommunications System (UMTS); Requirements on User Equipments (UEs) supporting a release-independent frequency band V4.11.0; 3GPP TS 25.307 version 4.11.0 Release 4
ETSI TS 101 322-1999 Telecommunications and Internet Protocol Harmonization over Networks (TIPHON); Signalling for Basic Calls and Inter Domain Calls, between an H.323 Terminal and a Terminal in a Switched-Circuit Network (SCN) Phase II: Scenario 1 + Scenario 2
ETSI ETS 300 791-1997 Network Aspects (NA); Universal Personal Telecommunication (UPT); Security Architecture for UPT Phase 2; Conformance Test Specification (CTS)
ETSI PRETS 300 791-1997 Network Aspects (NA); Universal Personal Telecommunication (UPT); Security Architecture for UPT Phase 2; Conformance Test Specification (CTS)
ETSI TS 136 307-2010 LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Requirements on User Equipments (UEs) supporting a release-independent frequency band V9.0.0; 3GPP TS 36.307 version 9.0.0 Release 9
ETSI TS 136 307-2011 LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Requirements on User Equipments (UEs) supporting a release-independent frequency band V10.0.1; 3GPP TS 36.307 version 10.0.1 Release 10
ETSI ETR 191-1995 Private Telecommunication Network (PTN); PTN Mobility; Use of Universal Personal Telecommunications (UPT) Phase 1; General Principles and Service Aspects
ETSI TS 148 001-2005 Digital Cellular Telecommunications System (Phase 2+); General Aspects on the BSS-MSC Interface 3GPP TS 48.001 version 6.0.0 Release 6
ETSI TS 148 001-2002 Digital Cellular Telecommunications System (Phase 2+); General Aspects on the BSS-MSC Interface 3GPP TS 48.001 Version 5.0.0 Release 5

National Aeronautics and Space Administration (NASA), One to the 10,000th power

NASA NACA-ACR-L5G31-1945 A simple method for estimating terminal velocity including effect of compressibility on drag

ANSI - American National Standards Institute, One to the 10,000th power

INCITS/ISO/IEC 15486:1998 Information technology - Data interchange on 130 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects - Capacity: 2@6 Gbytes per cartridge (Adopted by INCITS)
INCITS/ISO/IEC 13403:1995 Information technology - Information interchange on 300 mm optical disk cartridges of the write once@ read multiple (WORM) type using the CCS method (Adopted by INCITS)
INCITS/ISO/IEC 20162:2001 Information technology Data interchange on 300 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects Capacity: 30 Gbytes per cartridge (Adopted by INCITS)
INCITS/ISO/IEC TR 10091:1995 Information technology - Technical aspects of 130 mm optical disk cartridge write-once recording format
INCITS/ISO/IEC 13614:1995 Information technology - Interchange on 300 mm optical disk cartridges of the write once@ read multiple (WORM) type using the SSF method (Adopted by INCITS)
INCITS 199-1991 Information Systems - 356-mm Optical Disk Cartridge (Write-Once) - Test Methods for Media Characteristics (Replaces ANSI X3.199-1991)

American National Standards Institute （ANSI), One to the 10,000th power

ANSI/ASTM F494:1993 Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
ANSI X3.199-1991 Information Systems - 356-mm Optical Disk Cartridge (Write-Once) - Test Methods for Media Characteristics

International Organization for Standardization (ISO), One to the 10,000th power

ISO/TR 8725:1988 Road vehicles; transient open-loop response test method with one period of sinusoidal input
ISO 5347-7:1993 Methods for the calibration of vibration and shock pick-ups; part 7: primary calibration by centrifuge
ISO 5347-6:1993 Methods for the calibration of vibration and shock pick-ups; part 6: primary vibration calibration at low frequencies
ISO 5347-10:1993 Methods for the calibration of vibration and shock pick-ups; part 10: primary calibration by high impact shocks
ISO 16063-17:2016 Methods for the calibration of vibration and shock transducers - Part 17: Primary calibration by centrifuge
ISO 5347-8:1993 Methods for the calibration of vibration and shock pick-ups; part 8: primary calibration by dual centrifuge
ISO 23907-1:2019 Sharps injury protection — Requirements and test methods — Part 1: Single-use sharps containers
ISO/IEC 10373-1:2020/PRF Amd 1:2023 Cards and security devices for personal identification — Test methods — Part 1: General characteristics — Amendment 1: Clarification of peel strength test method to be used for ISO/IEC 7810 conformance testing
ISO/IEC 10373-1:2020/Amd 1:2023 Cards and security devices for personal identification — Test methods — Part 1: General characteristics — Amendment 1: Clarification of peel strength test method to be used for ISO/IEC 7810 conformance testing
ISO/TS 22475-3:2007 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 3: Conformity assessment of enterprises and personnel by third party
ISO 3744:1994 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane
ISO/TS 7821:2005 Tobacco and tobacco products - Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
ISO/IEC 10373-1:2020/DAmd 1 Cards and security devices for personal identification — Test methods — Part 1: General characteristics — Amendment 1: Clarification of peel strength test method to be used for ISO/IEC 7810 conformance testing
ISO 14853:2005/cor 1:2009 Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production TECHNICAL CORRIGENDUM 1

European Committee for Electrotechnical Standardization（CENELEC）, One to the 10,000th power

EN 60244-14:1997 Methods of Measurement for Radio Transmitters Part 14: External Intermodulation Products Caused by Two or More Transmitters Using the Same or Adjacent Antennas
EN 50604-1:2016 Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods

GOSTR, One to the 10,000th power

GOST 12.4.172-2019 Occupational safety standards system. Personal protective means from power frequency electric fields. Personal screening suit. General technical requirements. Test methods

国家市场监督管理总局、中国国家标准化管理委员会, One to the 10,000th power

GB/T 40181-2021 Test method and evaluation for flushability of disposable sanitary nonwoven materials

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., One to the 10,000th power

ASHRAE OR-10-005-2010 High Density Cooling Solutions-Taking IT to the Next Level: The Cold Aisle Containment Alternative
ASHRAE 152P-1999 Method of Test for Determining the Design and Seasonal Efficiencies of Residential Thermal Distribution Systems (First Public Review Draft)

BE-NBN, One to the 10,000th power

NBN B 54-103-1977
NBN X 03-009-1988 Precision of tests methods - Détermination of repeatabi1ity and reproductibi1ity for a standard test method by inter-laboratory tests

Malaysia Standards, One to the 10,000th power

MS 875-2001 Method of test for sulphur in liquefied petroleum gases(Oxy-hydrogen burner or lamp)(First revision)
MS 133 Pt.D1-1998 Methods of test for paints and varnishes:part d1:visual comparison of the colour of paints (first revision)
MS 954 Pt.2-2000 Methods of test for meat and meat products: Part 2: determination of total ash (first revision)
MS 954 Pt.1-2000 Methods of test for meat and meat products: Part 1: determination of moisture content (first revision)
MS 133 Pt.E2-2000 Methods of test for paints and varnishes:Part E2:Scratch test(First revision)(ISO 1518:1992,MOD)
MS 133 Pt.E6-2000 Methods of test for paints and varnishes:Part E6:Cross-cut test (First revision) (ISO 2409:1992,MOD)
MS 133 Pt.E7-2000 Methods of test for paints and varnishes:Part E7:Resistance to impact (Falling ball test) (First revision)
MS 133 Pt.B3-1998 Methods of test for paints and varnishes:part b3:determination of pigment content (centrifuge) (first revision)
MS 954 Pt.5-2000 Methods of test for meat and meat products: Part 5: determination of free fat content (first revision)
MS 133 Pt.E5-2000 Methods of test for paints and varnishes:Part E5:Pendulum damping test (First revision)(ISO 1522:1998,MOD)
MS 133 Pt.D4-1998 Methods of test for paints and varnishes:part d4:comparison of Ccontrast ratio (hiding power) of paints of the same type and colour (first revision)
MS 133 Pt.E3-2000 Methods of test for paints and varnishes:Part E3:Resistance to impact(Falling-weight test)(First revision)(ISO 6272:1993,MOD)
MS 954 Pt.12-2000 Methods of test for meat and meat products: Part 12: determination of chloride content (as sodium chloride) (first revision)
MS 954 Pt.9-2000 Methods of test for meat and meat products:Part 9:Determination of hydroxyproline content (First revision)(ISO 3496:1994,IDT)
MS 133 Pt.E1-2000 Methods of test for paints and varnishes:Part E1:Bend test(Cylindrical mandrel)(First revision)(ISO 1519:1973,MOD)

ETSI - European Telecommunications Standards Institute, One to the 10,000th power

ETR 191-1995 Private Telecommunication Network (PTN); PTN Mobility; Use of Universal Personal Telecommunications (UPT) Phase 1; General Principles and Service Aspects
ETR 215-1995 Universal Personal Telecommunication (UPT); Phase 1 (Restricted UPT Service Scenario); Service Aspects of Charging@ Billing and Accounting
PRETS 300 791-1997 Network Aspects (NA); Universal Personal Telecommunication (UPT); Security Architecture for UPT Phase 2; Conformance Test Specification (CTS)
ETS 300 791-1997 Network Aspects (NA); Universal Personal Telecommunication (UPT); Security Architecture for UPT Phase 2; Conformance Test Specification (CTS)
ETR 093-1993 Satellite Earth Stations (SES); Possible European Standardisation of Certain Aspects of Satellite Personal Communications Networks (S-PCN) Phase 1 Report

Lithuanian Standards Office , One to the 10,000th power

LST EN 15964-2011 Breath alcohol test devices other than single use devices - Requirements and test methods
LST EN 61427-2005 Secondary cells and batteries for photovoltaic energy systems (PVES). General requirements and methods of test (IEC 61427:2005)
LST EN 50604-1/A1-2021 Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods

US-CFR-file, One to the 10,000th power

CFR 5-843.202-2014 Administrative personnel. Part843:Federal employees retirement system—death benefits and employee refunds. SubpartB:One-time payments. section843.202:Eligibility for payment of the unexpended balance to a separated employee.
CFR 33-146.405-2014 Navigation and navigable waters. Part146:Operations. Section146.405:Safety and Security notice of arrival for vessels arriving at a place on the OCS.

Indonesia Standards, One to the 10,000th power

SNI 04-6392-2000 Secondary cells and batteries for individual photovoltaic electric power generating system - General requirement and method of tests

KR-KS, One to the 10,000th power

KS A ISO 3951-1-2008 Sampling procedures for inspection by variables－Part 1: Specification for single sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection for a single quality characteristic a

International Electrotechnical Commission (IEC), One to the 10,000th power

IEC 60945/AMD1:1992 Marine navigational equipment; general requirements; methods of testing and required test results; amendment 1

Conference of European Post Telecommunication (CEPT), One to the 10,000th power

CEPT ERC REPORT 48-1995 Comparison of the Subdivision and Interleaved Methods Concerning the Arrangement of Channel Patterns within a Frequency Range (Stockholm)

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, One to the 10,000th power

ITU-T H.830.3-2016 Conformance of ITU-T H.810 personal health devices: WAN interface Part 3: SOAP/ATNA: Sender (Study Group 16)
ITU-T H.830.7-2016 Conformance of ITU-T H.810 personal health devices: WAN interface Part 7: Consent management: Sender (Study Group 16)
ITU-T H.830.9-2016 Conformance of ITU-T H.810 personal health devices: WAN interface Part 9: hData observation upload: Sender (Study Group 16)

ES-AENOR, One to the 10,000th power

UNE 20-179 Pt.3-1985

ES-UNE, One to the 10,000th power

UNE-EN ISO 11810:2015 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition (ISO 11810:2015) (Endorsed by AENOR in...
UNE-EN 50604-1:2016 Secondary Lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods (Endorsed by AENOR in December of 2016.)
UNE-EN 50604-1:2016/A1:2021 Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods (Endorsed by Asociación Española de Normalización in September of 2021.)

AT-ON, One to the 10,000th power

ONORM DIN 10322-1993 Determination of water content, solids-not-fat and fat contents of butter on the same test portion - Reference method

Professional Standard - Medicine, One to the 10,000th power

YY/T 1416.3-2016 Test method for additive in single-use containers for human venous blood specimen collection.Part 3:Heparin
YY/T 1416.4-2016 Test method for additive in single-use containers for human venous blood specimen collection.Part 4:Fluoride

Aerospace, Security and Defence Industries Association of Europe (ASD), One to the 10,000th power

ASD-STAN PREN 3841-307-1998 Aerospace Series Circuit Breakers Test Methods Part 307 : Performance with a Locked Tripping System (Edition P 2)

国家药监局, One to the 10,000th power

YY/T 1416.5-2021 Method for determination of dosage added in disposable human venous blood sample collection containers Part 5: Glycine

国家食品药品监督管理局, One to the 10,000th power

YY/T 0616.3-2018 Disposable Medical Gloves Part 3: Methods for Determining Actual Time Expiration Dates Using Finished Gloves in Storage