ZH
RU
ES

Vacuum leak rate

Vacuum leak rate, Total:200 items.

In the international standard classification, Vacuum leak rate involves: Vacuum technology, Installations in buildings, Petroleum, petroleum products and natural gas handling equipment, Fluid storage devices, Pipeline components and pipelines, Electrical equipment for working in special conditions, Nuclear energy engineering, Valves, Protection of and in buildings, Protective equipment, Air quality, Elements of buildings, Protection against fire, Hospital equipment, Mechanical testing, Radiation protection, Radiation measurements, Aerospace electric equipment and systems, Road vehicle systems, Fuels, Ventilators. Fans. Air-conditioners, Freight distribution of goods, Sterilization and disinfection, Aircraft and space vehicles in general, Shipbuilding and marine structures in general, Lamps and related equipment, Fluid power systems, Semiconductor devices, Services, Packaging materials and accessories, Power stations in general, Telecommunication systems, Construction materials, Glass, Packaging and distribution of goods in general, Paper and board, Hydraulic construction, Water quality.

US-CFR-file, Vacuum leak rate

CFR 40-1065.644-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.644:Vacuum-decay leak rate.

IT-UNI, Vacuum leak rate

UNI ISO 27895:2020 Vacuum technology -- Valves -- Leak test
UNI ISO/TS 20177:2020 Vacuum technology -- Vacuum gauges -- Procedures to measure and report outgassing rates

RU-GOST R, Vacuum leak rate

GOST R ISO 27895-2013 Vacuum technology. Valves. Leak test
GOST 9544-2015 Pipeline valves. Leakage rates of valves
GOST 9544-1993 Pipeline gate valves-rates of gates sealibility
GOST 9544-1975 Pipeline stop valves. Standards for disc tightness
GOST 19656.16-1986 Semiconductor microwave limiter diodes. Measurement method of break-down and leakage powers

CZ-CSN, Vacuum leak rate

CSN 70 0577-1982 Glass Test of leakage of vacuum ground glass

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Vacuum leak rate

GB/T 32218-2015 Vacuum technology.Test methods for leak rates of vacuum system
GB/T 36176-2018 Vacuum technology.Vacuum leak testing method by helium mass spectrometer
GB/T 32293-2015 Vacuum technology.Selection of leak test methods for vacuum equipment
GB/T 18193-2000 Vacuum technology-Mass-spectrometer-type leak detector calibration
GB/T 18443.3-2010 Testing method of performance for vacuum insulation cryogenic equipment.Part 3:Leak rate measurement
GB/T 18443.4-2010 Performance test methods for vacuum insulation and cryogenic equipment - Part 4: Measurement of leakage and outgassing rates
GB/Z 42624-2023 Procedure for Testing and Reporting Outgassing Rates of Vacuum Technology Vacuum Gauges
GB/T 32062-2015 In-situ test method for degradation ratio of vacuum degree of vacuum glazing.Photoelastic method
GB/T 22881-2008 Paper and board.Determination of roughness/smoothness(air leak methods).General method

American National Standards Institute （ANSI), Vacuum leak rate

ANSI/ASSE 1056-2013 Performance Requirements for Spill Resistant Vacuum Breaker Assemblies
ANSI/ASTM E783:1993 Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors (04.11)

Japanese Industrial Standards Committee (JISC), Vacuum leak rate

JIS Z 8754:1999 Vacuum technology -- Mass-spectrometer-type leak-detector calibration
JIS T 8159:1995 Leakage rate testing method for facepieces of respirators
JIS T 8159:2006 Leakage rate testing method for respiratory protective devices
JIS R 3224-3:2018 Glass in buildings -- Insulating glass -- Part 3: Gas concentration and gas leakage

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Vacuum leak rate

GB/T 34878-2017 Vacuum technology—Valves—Leak test

Danish Standards Foundation, Vacuum leak rate

DS/EN 13160-2:2003 Leak detection systems - Part 2: Pressure and vacuum systems
DS/EN 13160-7:2003 Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets
DS/EN 13160-4:2003 Leak detection systems - Part 4: Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces
DS/EN 1279-3:2003 Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances
DS/EN 2591-312:1998 Aerospace series - Elements of electrical and optical connection - Test methods - Part 312: Air leakage
DS/EN 1822-4:2009 High efficiency air filters (EPA, HEPA and ULPA) - Part 4: Determining leakage of filter elements (scan method)

Lithuanian Standards Office , Vacuum leak rate

LST EN 13160-2-2004 Leak detection systems - Part 2: Pressure and vacuum systems
LST EN 13160-7-2004 Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets
LST EN 13160-4-2004 Leak detection systems - Part 4: Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces
LST EN 1279-3-2003 Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances
LST EN 2591-312-2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 312: Air leakage
LST EN 1822-4-2010 High efficiency air filters (EPA, HEPA and ULPA) - Part 4: Determining leakage of filter elements (scan method)

AENOR, Vacuum leak rate

UNE-EN 13160-2:2003 Leak detection systems - Part 2: Pressure and vacuum systems
UNE-EN 13160-7:2003 Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets
UNE-EN 13160-7:2017 Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
UNE-EN 13160-2:2017 Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems
UNE-EN 13160-4:2003 Leak detection systems - Part 4: Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces
UNE-EN 1279-3:2003 Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances.
UNE-EN 1822-4:2010 High efficiency air filters (EPA, HEPA and ULPA) - Part 4: Determining leakage of filter elements (scan method)

American Society for Testing and Materials (ASTM), Vacuum leak rate

ASTM D4991-07 Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
ASTM E2357-23 Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies
ASTM D4991-94(1999) Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
ASTM D4991-07(2023) Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
ASTM D4991-07(2015) Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
ASTM E779-99 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
ASTM E779-03 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
ASTM E779-10 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
ASTM E1680-11 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems
ASTM E1680-16(2022) Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems
ASTM F2338-09(2020) Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
ASTM E1554/E1554M-13 Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization
ASTM E2357-05 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies
ASTM E1554-03 Standard Test Methods for Determining External Air Leakage of Air Distribution Systems by Fan Pressurization
ASTM F3169-16 Standard Test Method for Leak Detection in Blister Packaging by Vacuum Deflection Method by Laser Measurement
ASTM D8052/D8052M-17 Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies
ASTM D8052/D8052M-22 Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies
ASTM E1554/E1554M-13(2023) Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization
ASTM E1424-91(2000) Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
ASTM C1642-20 Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
ASTM D6834-02 Standard Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser
ASTM D6834-02(2008) Standard Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser
ASTM E1424-91(2008) Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
ASTM D5269-96(2008) Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method
ASTM D5269-15 Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method
ASTM D526-70 Standard test method for determining transmittance of non-leaking confined aquifers using the Theis recovery method
ASTM E1554-94 Standard Test Methods for Determining External Air Leakage of Air Distribution Systems by Fan Pressurization
ASTM E3021/E3021M-15 Standard Guide for Evaluating the Relative Effectiveness of Building Systems to Resist the Passage of Products of Combustion Based on the Aggregation of Leakage Rates
ASTM D5270-96(2008) Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers

Group Standards of the People's Republic of China, Vacuum leak rate

T/AVS 003-2020 Specification for selection of leak detection methods for vacuum components of fusion devices
T/AVS 002-2020 Leak detection test method for vacuum-related components of large-scale high-vacuum devices
T/CAS 599-2022 Test methods and limits of refrigerant (HFC-134a) leakage in automobile air conditioning
T/CSEE 0293-2022 Leak detection guidelines for turbine generator vacuum systems

Society of Automotive Engineers (SAE), Vacuum leak rate

SAE ARP1405-1992 Uniform Measurement Units for Leakage Rates
SAE MAP4053-2007 UNIFORM MEASUREMENT UNITS FOR LEAKAGE RATES
SAE J2298-2011 Ultraviolet Leak Detection: Procedure for Use of Refrigerant leak Detection Dyes for Service of Mobile Air-Conditioning Systems
SAE J2298-1996 Ultraviolet Leak Detection: Procedure for Use of Refrigerant Leak Detection Dyes for Service of Mobile Air-Conditioning Systems
SAE J1628-2014 Technician Procedures for Refrigerant Leak Detection in Service of Mobile Air Conditioning Systems
SAE J2297-1996 Ultraviolet Leak Detection: Stability and Compatibility Criteria of Fluorescent Refrigerant Leak Detection Dyes for Mobile R-134a Air- Conditioning Systems, Standard September 1996

SAE - SAE International, Vacuum leak rate

SAE ARP1405-1976 UNIFORM MEASUREMENT UNITS FOR LEAKAGE RATES
SAE MAP4053A-2016 Uniform Measurement Units for Leakage Rates
SAE J2679-2004 Charge Air Cooler Leakage
SAE J2679-2010 Charge Air Cooler Leakage
SAE J1628-2011 Technician Procedures for Refrigerant Leak Detection in Service of Mobile Air Conditioning Systems
SAE J1628-2020 Technician Procedures for Refrigerant Leak Detection in Service of Mobile Air Conditioning Systems
SAE J1628-1993 Technician Procedure for Using Electronic Refrigerant Leak Detectors for Service of Mobile Air-Conditioning Systems

Korean Agency for Technology and Standards (KATS), Vacuum leak rate

KS B 5648-2002(2017) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS P 1104-2006 Leakage rate testing method for facepieces of respirstors
KS P 1104-2006(2021) Leakage rate testing method for facepieces of respirstors
KS R 1168-2009(2019) Test method of refrigerant leakage rates from mobile air conditioning system
KS B 5648-2002(2022) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS P 1104-2006(2016) Leakage rate testing method for facepieces of respirstors
KS R 1168-2009 Test method of refrigerant leakage rates from mobile air conditioning system
KS V ISO 18770-2012(2022) Machinery-space flammable oil systems－Prevention of leakage of flammable oil
KS B ISO 3530-2002(2012) Vacuum technology－Mass－spectrometer－type leak－detector calibration
KS B ISO 3530:2002 Vacuum technology-Mass-spectrometer-type leak-detector calibration
KS B ISO 3530:2013 Vacuum technology－Mass－spectrometer－type leak－detector calibration
KS V 7750-2020 Procedure of refrigerant leakage detection test for air conditioning,cooling and heating equipment in accommodation

German Institute for Standardization, Vacuum leak rate

DIN EN 13274-1:2001 Respiratory protective devices - Methods of test - Part 1: Determination of inward leakage and total inward leakage; German version EN 13274-1:2001
DIN EN 13160-7:2016-12 Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets; German version EN 13160-7:2016 / Note: Applies in conjunction with DIN EN 13160-2 (2016-12), DIN EN 13...
DIN 25436:1980 Integral leakage rate test of containment with the absolute pressure method
DIN EN 13160-2:2016-12 Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems; German version EN 13160-2:2016
DIN EN 13160-7:2016 Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets; German version EN 13160-7:2016
DIN EN 61534-22:2015 Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation (IEC 61534-22:2014); German version EN 61534-22:2014
DIN EN 61534-22:2009 Powertrack systems - Part 22: Particular requirements for powertrack systems intended for on floor or under floor installation (IEC 61534-22:2009); German version EN 61534-22:2009
DIN EN 13160-2:2003 Leak detection systems - Part 2: Pressure and vacuum systems; German version EN 13160-2:2003
DIN EN 1279-3:2018 Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances
DIN EN 1279-3:2018-10 Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances; German version EN 1279-3:2018
DIN EN 2591-312:1997-12 Aerospace series - Elements of electrical and optical connection; test methods - Part 312: Air leakage; German version EN 2591-312:1997
DIN 28411:1976 Vacuum technology; acceptance specifications for mass spectrometer-type leak-detector, terms

Association Francaise de Normalisation, Vacuum leak rate

NF S76-007-1*NF EN 13274-1:2001 Respiratory protective devices - Methods of test - Part 1 : determination of inward leakage and total inward leakage
NF E86-601-7*NF EN 13160-7:2017 Leak detection systems - Part 7 : requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
NF M62-211:1984 Limiting enclosures. Method of control of the leak rate per hour. Enclosures of class 3.
NF E86-601-2*NF EN 13160-2:2017 Leak detection systems - Part 2 : requirements and test/assessment methods for pressure and vacuum systems
NF EN 13160-2:2017 Systèmes de détection de fuites - Partie 2 : exigences et méthodes d'essai/d'évaluation des systèmes sous pression et à dépression
NF M62-212:1984 Enceintes de confinement - Méthode de contrôle du taux de fuite horaire - Enceintes de classe 4.
NF EN 1279-3:2018 Verre dans la construction - Vitrage isolant - Partie 3 : méthode d'essai à long terme pour le débit de fuite et prescriptions pour les tolérances de concentration en gaz
NF E86-601-2:2003 Leak detection systems - Part 2 : pressure and vacuum systems.
NF EN 13160-7:2017 Systèmes de détection de fuites - Partie 7 : exigences et méthodes d'essai/d'évaluation pour les espaces interstitiels, les détecteurs de fuite des revêtements et les détecteurs de fuite d'enveloppes
NF X10-530:1975 Vacuum technology - Mass spectrometer-type leak-detector calibration.
NF P78-473*NF EN 1279-3:2018 Glass in building - Insulating glass units - Part 3 : long term test method and requirements for gas leakage rate and for gas concentration tolerances
NF L54-002-031*NF EN 2591-312:1998 Aerospace series. Elements of electrical and optical connection. Test methods. Part 312 : air leakage.

European Committee for Standardization (CEN), Vacuum leak rate

EN 13274-1:2001 Respiratory protective devices - Methods of test - Part 1: Determination of inward leckage and total inward leckage
EN 13160-2:2016 Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems
EN 13160-2:2003 Leak detection systems - Part 2: Pressure and vacuum systems
EN 13160-4:2003 Leak detection systems - Part 4: Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces

Underwriters Laboratories (UL), Vacuum leak rate

UL 1784-1990 Air leakage tests of door assemblies
UL 555S-1993 Leakage rated dampers for use in smoke control systems

GM Europe, Vacuum leak rate

GME OPEL 600-1983 Determination of Amount of Air Leakage (German)

Taiwan Provincial Standard of the People's Republic of China, Vacuum leak rate

CNS 14257-1998 Method of test for leakage rate respirator facepiece

Professional Standard - Aerospace, Vacuum leak rate

QJ 1610-1989 Classification of valve gas leakage rate and its detection
QJ 2675.3-1994 Cryogenic vessel performance test method Vacuum interlayer leak rate test
QJ 3123-2000 Vacuum leaks detection method by helium mass spectrometer

British Standards Institution (BSI), Vacuum leak rate

BS EN 13160-7:2003 Leak detection systems - General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets
BS EN 13160-2:2016 Tracked Changes. Leak detection systems. Requirements and test/assessment methods for pressure and vacuum systems
BS EN 2591-312:1998 Elements of electrical and optical connection - Test methods - Air leakage
BS EN 13160-2:2003 Leak detection systems - Pressure and vacuum systems
BS EN 13160-4:2003 Leak detection systems - Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces
BS EN 1822-4:2000 High efficiency air filters (HEPA and ULPA) - Determining leakage of filter element (scan method)
BS EN 1822-4:2010 High efficiency air filters (EPA, HEPA and ULPA). Determining leakage of filter elements (scan method)
BS EN 13160-7:2016 Tracked Changes. Leak detection systems. Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
PD ISO/TS 20177:2018 Vacuum technology. Vacuum gauges. Procedures to measure and report outgassing rates
BS ISO 8791-4:2008 Paper and board. Determination of roughness/smoothness (air leak methods). Print-surf method
BS ISO 8791-2:2013 Paper and board. Determination of roughness/smoothness (air leak methods). Bendtsen method
BS EN 1822-4:2009 High efficiency air filters (EPA, HEPA and ULPA) - Determining leakage of filter elements (scan method)
BS ISO 18770:2005 Ships and marine technology. Machinery space flammable oil systems. Prevention of leakage of flammable oil

Professional Standard - Medicine, Vacuum leak rate

YY/T 0866-2011 Total inward leakage determination method of protective face mask for medical use

ANS - American Nuclear Society, Vacuum leak rate

N45.4-1972 Leakage-rate testing of containment structures for nuclear reactors

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Vacuum leak rate

ASHRAE 4275-1999 Protocol for Field Testing of Tall Buildings to Determine Envelope Air Leakage Rate (RP-935)
ASHRAE CH-99-14-2-1999 Distribution System Leakage Impacts on Apartment Building Ventilation Rates
ASHRAE CH-03-7-3-2003 Air Handler Leakage: Field Testing Results in Residences
ASHRAE CH-03-10-2-2003 Quantification of Air Leakage Effects on the Condensation Resistance of Windows
ASHRAE 215-2018 Method of Test to Determine Leakage of Operating HVAC Air Distribution Systems

National Metrological Technical Specifications of the People's Republic of China, Vacuum leak rate

JJF 1833-2020 Calibration Specification for Vacuum Helium Leaks

Professional Standard - Building Materials, Vacuum leak rate

JC/T 2313-2015 Nitrogen leakage test machine for nonmetallic sealing material

Canadian Standards Association (CSA), Vacuum leak rate

CSA N287.6-94-1994 Pre-Operational Proof and Leakage Rate Testing Requirements for Concrete Containment Structures for CANDU Nuclear Power Plants General Instruction No 1

Defense Logistics Agency, Vacuum leak rate

DLA MS21430 REV A NOTICE 1-1998 VALVE, CHECK, FUEL AND AIR, POPPET TYPE, ZERO, LEAK
DLA MS21430 REV A-1977 VALVE, CHECK, FUEL AND AIR, POPPET TYPE, ZERO, LEAK
DLA MS21430 REV B-2009 VALVE, CHECK, FUEL AND AIR, POPPET TYPE, ZERO, LEAK

Professional Standard - Machinery, Vacuum leak rate

JB/T 11238-2011 Vacuum technology - Efficiency of liquid- ring vacuum pumps

U.S. Air Force, Vacuum leak rate

AIR FORCE MIL-D-81298 D ADMIN NOTICE 2-2005 DYE, LIQUID FOR THE DETECTION OF LEAKS IN AIRCRAFT FUEL SYSTEMS
AIR FORCE MIL-D-81298 D-1988 DYE, LIQUID FOR THE DETECTION OF LEAKS IN AIRCRAFT FUEL SYSTEMS
AIR FORCE MIL-V-26115 A-1957 VACUUM SYSTEM, LEAK DETECTOR, AUXILIARY AF-E34T-1

AT-ON, Vacuum leak rate

ONORM C 2116 Teil.2-1984 Vertical cylindrical tanks made of steel; double walled; with vacuum-leakage indicator, for above ground storage of liquids

国家药监局, Vacuum leak rate

YY/T 0681.18-2020 Test methods for sterile medical device packaging - Part 18: Non-destructive testing of packaging leakage using vacuum attenuation method

Professional Standard - Aviation, Vacuum leak rate

HB 8424-2014 Leak test method for sealing of aviation components

Electronic Components, Assemblies and Materials Association, Vacuum leak rate

ECA EIA-364-02D-2012 TP-02D AIR LEAKAGE TEST PROCEDURE FOR ELECTRICAL CONNECTORS
ECA EIA-364-78B-2010 TP-78B CAVITY-TO-CAVITY LEAKAGE BONDING INTEGRITY TEST PROCEDURE FOR ELECTRICAL CONNECTORS

ECIA - Electronic Components Industry Association, Vacuum leak rate

364-02A-1986 TP-02A Air Leakage Test Procedure for Electrical Connectors
EIA-364-02C-1999 TP-02C Air Leakage Test Procedure for Electrical Connectors
364-02B-1997 TP-02B Air Leakage Test Procedure for Electrical Connectors
EIA-364-02D-2012 TP-02D AIR LEAKAGE TEST PROCEDURE FOR ELECTRICAL CONNECTORS
EIA-364-78C-2018 TP-78C Cavity Leakage Bonding Integrity Test Procedure for Electrical Connectors
EIA-364-78B-2010 TP-78B CAVITY-TO-CAVITY LEAKAGE BONDING INTEGRITY TEST PROCEDURE FOR ELECTRICAL CONNECTORS

TIA - Telecommunications Industry Association, Vacuum leak rate

EIA-455-23A-1985 FOTP-23 Air Leakage Testing of Fiber Optic Component Seals

国家市场监督管理总局、中国国家标准化管理委员会, Vacuum leak rate

GB/T 35049-2018 Vacuum technology—Leak testing method by quadrupole mass spectrometer
GB/T 17186.2-2018 Calculation methods for the pipe flange joints—Part 2：Calculation method satisfies leakage rate

JP-JASO, Vacuum leak rate

JASO Z123-2007 Automotive parts-Air conditioner-Test method for measuring refrigerant (R134a)leakage

Jiangsu Provincial Standard of the People's Republic of China, Vacuum leak rate

DB32/T 4486-2023 Gasket coefficient (m) and specific pressure (y) test method based on leakage rate

International Organization for Standardization (ISO), Vacuum leak rate

ISO 3530:1979 Vacuum technology; Mass-spectrometer-type leak-detector calibration
ISO 20492-3:2010 Glass in buildings - Insulating glass - Part 3: Gas concentration and gas leakage
ISO/CD 20492-3 Glass in buildings — Insulating glass — Part 3: Gas concentration and gas leakage
ISO/TS 20177:2018 Vacuum technology - Vacuum gauges - Procedures to measure and report outgassing rates
ISO 16900-1:2014 Respiratory protective devices - Methods of test and test equipment - Part 1: Determination of inward leakage
ISO/DIS 20492-3:2023 Glass in buildings — Insulating glass — Part 3: Gas concentration and gas leakage

WRC - Welding Research Council, Vacuum leak rate

BULLETIN 431-1998 SUMMARY OF GASKET STEAM LEAKAGE TESTS: I) GASKET STEAM LEAKAGE TESTS ; II) LEAK TESTS CONDUCTED ON GRAPHITE GASKETS; III) LONG DURATION AIR AND STEAM SCREENING TESTS ON ELASTOMERIC SHEET GASKET MATERI

JP-JRA, Vacuum leak rate

JRA GL-13-2012 Guideline of design construction for ensuring safety against refrigerant leakage from multi-split system air conditioners

National Aeronautics and Space Administration (NASA), Vacuum leak rate

NASA-TM-213049-2004 Leakage and Power Loss Test Results for Competing Turbine Engine Seals

GOSTR, Vacuum leak rate

GOST R 58806-2020 Ships and marine technology. Machinery-space systems. Prevention of leakage of oil products

Compressed Gas Association (U.S.), Vacuum leak rate

CGA E-14-2013 Maximum leakage rates (gas tightness) of equipment used for welding, cutting, and allied processes

International Telecommunication Union (ITU), Vacuum leak rate

ITU-T SERIE P SUPP 20 FRENCH-1993 EXAMPLES OF MEASUREMENTS OF HANDSET RECEIVE-FREQUENCY RESPONSES: DEPENDENCE ON EARCAP LEAKAGE LOSSES
ITU-T SERIE P SUPP 20 SPANISH-1993 EXAMPLES OF MEASUREMENTS OF HANDSET RECEIVE-FREQUENCY RESPONSES: DEPENDENCE ON EARCAP LEAKAGE LOSSES
ITU-T P SUPP 20-1993 Examples of measurements of handset receive-frequency responses: Dependence on earcap leakage losses

Professional Standard - Nuclear Industry, Vacuum leak rate

EJ/Z 4-1978 Vacuum leak test rules for containers and equipment with helium hood method

Indonesia Standards, Vacuum leak rate

SNI ISO 20492-3:2014 Glass in buildings — Insulating glass — Part 3: Gas concentration and gas leakage

ES-UNE, Vacuum leak rate

UNE-EN 1279-3:2019 Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances