ZH
RU
ES

Transmission in Fiber

Transmission in Fiber, Total:498 items.

In the international standard classification, Transmission in Fiber involves: Welding, brazing and soldering, Electrical and electronic testing, Fibre optic communications, Optical equipment, Optics and optical measurements, Products of the textile industry, Plastics, Glass, Reinforced plastics, Protection against fire, Paper and board, Radiation protection, Construction materials, Air quality, Photography, Medical equipment, Products of the chemical industry, Organic chemicals, Solar energy engineering, Rubber and plastics products, Optoelectronics. Laser equipment, General methods of tests and analysis for food products, Electronic display devices, Ceramics, Graphic technology, Analytical chemistry, Testing of metals, Pulps, Nuclear energy engineering, Electronic tubes, Radiocommunications, Elements of buildings, Lamps and related equipment, Road vehicle systems, Protective equipment, Protection of and in buildings, Inorganic chemicals, Water quality, Aerospace engines and propulsion systems, Interface and interconnection equipment, Animal feeding stuffs, Fuels, Radiation measurements, Non-destructive testing.

(U.S.) Telecommunications Industries Association , Transmission in Fiber

TIA-455-244-2011 Methods for Measuring the Change in Transmittance of Optical Fibers in Expressed Buffer Tubes When Subjected to Temperature Cycling
TIA-455-64-1998(2002) FOTP-64 Procedure for Measuring Radiation-Induced Attenuation in Optical Fibers and Optical Cables
TIA-455-64-1998 FOTP-64 Procedure for Measuring Radiation-Induced Attenuation in Optical Fibers and Optical Cables
TIA-455-20-B-2004(2013) FOTP-20 IEC 60793-1-46: Optical Fibres- Part 1- 46: Measurement Methods and Test Procedures- Monitoring of Changes in Optical Transmittance
TIA-455-20-B-2004 FOTP-20 IEC 60793-1-46: Optical Fibres- Part 1- 46: Measurement Methods and Test Procedures- Monitoring of Changes in Optical Transmittance
TIA TSB-62-2010 Procedure for Applying Loads Directly to the Fiber in Optical Connectors or Fiber/Ferrule Assemblies to Quantify Fiber Pushback
TIA EIA/TIA-455-42A-1989 FOTP-42 Optical Crosstalk in Fiber Optic Components
TIA TSB62-10-1999 ITM-10 Procedure for Applying Loads Directly to the Fiber in Optical Connectors or Fiber/Ferrule Assemblies to Quantify Fiber Pushback
TIA-455-38-1995 FOTP-38 Measurement of Fiber Strain in Cables under Tensile Load
TIA TSB-4947-2015 Guidance for Adhesive Usage in Fiber Optic Components
TIA-526-2-A-2015 Effective Transmitter Output Power Coupled into Single-Mode Fiber Optic Cable- Adoption of IEC 61280-1-1 ed.2 Part 1-1: Test Procedures for General Communication Subsystems- Transmitter Output Measurement for Single-Mode Optical Fibre Cable
TIA-526-11-1991 OFSTP-11 Measurement of Single-Reflection Power Penalty for Fiber Optic Terminal Equipment
TIA TSB120-2000 Polarization Maintaining Fiber in Telecommunications: Applications and Challenges

Association of German Mechanical Engineers, Transmission in Fiber

German Institute for Standardization, Transmission in Fiber

DIN 58141-2:2012-09 Measurement of fiber optic elements - Part 2: Determination of spectral transmittance of light guides; Text in German and English
DIN 58141-2:1989 Testing of fibre optic elements; determination of spectral transmittance of light guides
DIN 1349-1:1972 Transmisson of optical radiation; optical clear (nonscattering) media, quantities, symbols and units
DIN 58141-2:2012 Measurement of fiber optic elements - Part 2: Determination of spectral transmittance of light guides; Text in German and English
DIN EN ISO 13468-1:1997 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:1996); German version EN ISO 13468-1:1996
DIN EN ISO 13468-2:2006 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999) English version of DIN EN ISO 13468-2:2006-07
DIN 1349-1:1972-06 Transmisson of optical radiation; optical clear (nonscattering) media, quantities, symbols and units
DIN EN 1557:1997-03 Surface active agents - Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission; German version EN 1557:1996
DIN 4522-4:1993 Photographic lenses; method for measuring the spectral transmittance
DIN 6868-160:2011 Image quality assurance in diagnostic X-ray departments - Part 160: Quality requirements for diagnostic non-transparent X-ray pictures in dental radiology
DIN 1349-2:1975 Transmission of optical radiation; turbid media, definitions
DIN EN ISO 13697:2006-08 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006); German version EN ISO 13697:2006
DIN EN 61746-2:2011-09 Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR for multimode fibres (IEC 61746-2:2010); German version EN 61746-2:2011 / Note: DIN EN 61746 (2005-10) remains valid alongside this standard until 2014-01-02.
DIN EN 61746-1:2011-10 Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single-mode fibres (IEC 61746-1:2009); German version EN 61746-1:2011 / Note: DIN EN 61746 (2005-10) remains valid alongside this standard until 2014-01-02.
DIN 4512-8:1993 Photographic sensitometry, determination of optical density; geometric conditions for transmission density
DIN 58141-11:2013-06 Measurement of fiber optic elements - Part 11: Determination of photometric characteristics of side emitting light guides; Text in German and English
DIN EN 60793-1-46:2002 Optical fibres - Part 1-46: Measurement methods and test procedures; Monitoring of changes in optical transmittance (IEC 60793-1-46:2001); German version EN 60793-1-46:2002
DIN EN ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006) English version of DIN EN ISO 13697:2006-08
DIN EN 13363-1:2007 Solar protection devices combined with glazing - Calculation of solar and light transmittance - Part 1: Simplified method(includes Amendment A1:2007) English version of DIN EN 13363-1:2007-09
DIN EN 1787:2000 Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy; German version EN 1787:2000
DIN 54500:2004 Testing of paper - Determination of the density-related light-scattering and absorption coefficients of paper and fibre materials
DIN EN 50411-3-2:2012-01 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-2: Singlemode mechanical fibre splice; German version EN 50411-3-2:2011
DIN EN 50411-3-6:2023-11 Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 3-6: Multi- mode mechanical fibre splice; German and English version prEN 50411-3-6:2021 / Note: Date of issue 2023-10-20...
DIN EN 50411-3-2:2023-11 Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 3-2: Single-mode mechanical fibre splice; German and English version prEN 50411-3-2:2021 / Note: Date of issue 2023-10-20...
DIN EN 61341:2012-08 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps (IEC/TR 61341:2010); German version EN 61341:2011 / Note: DIN IEC/TR 61341 (2011-01) remains valid alongside this standard until 2014-07-04.
DIN EN 50411-3-3:2021-03 Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 3-3: Singlemode optical fibre fusion splice protectors; German version EN 50411-3-3:2019 / Note: DIN EN 50411-3-3 (2012-0...
DIN EN IEC 62614-1:2021-04 Fibre optics - Multimode launch conditions - Part 1: Launch condition requirements for measuring multimode attenuation (IEC 62614-1:2020); German version EN IEC 62614-1:2020 / Note: DIN EN 62614 (2011-04) remains valid alongside this standard until 202...

Taiwan Provincial Standard of the People's Republic of China, Transmission in Fiber

CNS 11705-1986 Method of Test for Fiber Devices (FOTP-20 Change of Optical Transmittance)
CNS 12372-1988 Method of Test for Fiber Optic Devices ( FOTP-53 Attenuation by Substitution Measurement for Multimode Graded-Index Optical Fibers or Fiber Assemblies Used in Long Length Communications System)

AT-ON, Transmission in Fiber

ONORM EN 379-1994 Specification for welding filters with switchable luminous transmittance and welding filters with dual luminous transmittance

British Standards Institution (BSI), Transmission in Fiber

BS EN 60793-1-46:2002 Optical fibres - Measurement methods and test procedures - Monitoring of changes in optical transmittance
BS EN ISO 13468-1:1997 Plastics. Determination of the total luminous transmittance of transparent materials. Single-beam instrument
BS ISO 12239:2021 Smoke alarms using scattered light, transmitted light or ionization
BS EN ISO 13468-2:1999 Plastics - Determination of the total luminous transmittance of transparent materials - Double-beam instrument
BS EN ISO 13468-2:2021 Plastics. Determination of the total luminous transmittance of transparent materials. Double-beam instrument
BS IEC 63085:2021 Radiation protection instrumentation. System of spectral identification of liquids in transparent and semitransparent containers (Raman systems)
BS ISO 8478:2017 Optics and photonics. Camera lenses. Measurement of ISO spectral transmittance
23/30469798 DC BS EN IEC 60793-1-46. Optical fibres - Part 1-46. Measurement methods and test procedures. Monitoring of changes in optical transmittance
BS EN 61746-1:2011 Calibration of optical time-domain reflectometers (OTDR). OTDR for single-mode fibres
BS ISO 26723:2020 Plastics. Determination of total luminous transmittance and reflectance
BS EN 62805-2:2017 Method for measuring photovoltaic (PV) glass. Measurement of transmittance and reflectance
BS ISO 15368:2001 Optics and optical instruments - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
BS ISO 19012-3:2015 Microscopes. Designation of microscope objectives. Spectral transmittance
PD IEC TS 62033:2000 Attenuation uniformity in optical fibres
20/30352222 DC BS ISO 15368. Optics and photonics. Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
BS IEC 61747-30-5:2019 Liquid crystal display devices - Optical measuring methods of transmissive transparent LCD modules
19/30368985 DC BS ISO 26723. Plastics. Determination of total luminous transmittance and reflectance
BS ISO 15368:2021 Tracked Changes. Optics and photonics. Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
BS EN 62788-1-4:2016 Measurement procedures for materials used in photovoltaic modules. Encapsulants. Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
PD IEC/TR 62690:2014 Hydrogen effects in optical fibre cables. Guidelines
BS EN 62788-1-4:2016+A1:2020 Measurement procedures for materials used in photovoltaic modules - Encapsulants. Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
BS ISO 14490-5:2006 Optics and optical instruments - Test methods for telescopic systems - Test methods for transmittance
22/30408069 DC BS ISO 23237. Glass in building-Testing method of light transmittance for glass photovoltaic(PV) module in buildings
BS EN 62614:2010 Fibre optics. Launch condition requirements for measuring multimode attenuation
BS EN 61746-2:2011 Calibration of optical time-domain reflectometers (OTDR). OTDR for multimode fibres
20/30384001 DC BS ISO 13142. Optics and photonics. Lasers and laser-related equipment. Cavity ring-down method for high-reflectance and high-transmittance measurements
BS EN IEC 62614-1:2020 Fibre optics. Multimode launch conditions - Launch condition requirements for measuring multimode attenuation
BS EN ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components
BS ISO 13794:2019 Ambient air. Determination of asbestos fibres. Indirect-transfer transmission electron microscopy method
BS ISO 10312:2019 Ambient air. Determination of asbestos fibres. Direct transfer transmission electron microscopy method
22/30405472 DC Fire detection and alarm systems - Part 7. Point-type smoke detectors using scattered light, transmitted light or ionization
BS ISO 10312:1995 Ambient air. Determination of asbestos fibres. Direct-transfer transmission electron microscopy method
BS ISO 28057:2014 Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy
BS EN ISO 28057:2021 Clinical dosimetry. Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy
BS ISO 13837:2008 Road vehicles. Safety glazing materials. Method for the determination of solar transmittance
BS EN 50411-2-10:2015 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Sealed fibre splice closures type 2, category G, for FTTH optical distribution networks
BS EN 61341:2010 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
BS EN IEC 62148-12:2004+A1:2022 Fibre optic active components and devices. Package and interface standards - Laser transmitters with a coaxial RF connector
BS EN 54-7:2001 Fire detection and fire alarm systems - Smoke detectors - Point detectors using scattered light, transmitted light or ionization
BS EN 61341:2011 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
BS EN 50377-15-1:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre
18/30387052 DC BS EN 62788-1-4 AMD1. Measurement procedures for materials used in photovoltaic modules. Part 1-4. Encapsulants. Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
BS EN 62148-12:2004 Fibre optic active components and devices - Package and interface standards - Laser transmitters with coaxial RF connector
17/30347208 DC BS ISO 7240-7. Fire detection and alarm systems. Part 7. Point-type smoke detectors using scattered light, transmitted light or ionization
20/30398781 DC BS IEC 63098-2. Transmitting equipment for radiocommunication. radio-over-fibre technologies and their performance standard. Part 2. Radio over fibre based fronthaul network for railway communication system
BS EN ISO 8980-3:1999 Ophthalmic optics - Uncut finished spectacle lenses - Transmittance specifications and test methods
BS EN 170:2003 Personal eye-protection - Ultraviolet filters.Transmittance requirements and recommended use
PD IEC/TR 63098-1:2017 Transmitting equipment for radiocommunication. Radio-over-fibre technologies and their performance standard. System applications of radio over fibre technology
BS EN 1787:2000 Foodstuffs. Detection of irradiated food containing cellulose by ESR spectroscopy
BS EN IEC 62149-3:2020 Fibre optic active components and devices. Performance standards. Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems
BS EN 14255-1:2005 Measurement and assessment of personal exposures to incoherent optical radiation - Ultraviolet radiation emitted by artifical sources in the workplace
BS EN 171:2002 Personal eye-protection - Infrared filters - Transmittance requirements and recommended use
BS EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser

Group Standards of the People's Republic of China, Transmission in Fiber

T/CNTAC 21-2018 Test method for identification of graphene materials in fibres– Transmission electron microscope (TEM) method
T/LNEMA 004-2022 Determination of Boron in Drinking Water by Flow Injection Spectrophotometry

VN-TCVN, Transmission in Fiber

TCVN 7737-2007 Glass in building.Method for determination of light transmittance, light reflectance, total solar energy transmittance and ultraviolet transmittance
TCVN 6502-1999 Ambient air.Determination of asbestos bibres.Direct-transfer transmission electron microscopy method
TCVN 6704-2008 Gasoline.Determination of lead by X-Ray spectroscopy

American National Standards Institute （ANSI), Transmission in Fiber

ANSI/TIA/EIA 455-64-1997 Procedure for Measuring Radiation-Induced Attenuation in Optical Fibers and Optical Cables
ANSI/ASTM D1494:2012 Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
ANSI/TIA-455-107A-1999 Return Loss for Fiber Optic Components
ANSI/TIA-455-20-B-2004 Fiber Optics - Measurement of Change in Optical Transmittance
ANSI/ICEA S-112-718-2013 Standard for Optical Fiber Cable for Placement in Sewer Environments
ANSI/ISO 8478:1996, ANSI/PIMA IT3.614:1997 Photography – Camera Lenses – Method for Measuring ISO Spectral Transmittance
ANSI/TIA/EIA 492A000-A-1997 Sectional Specification for Class 1a Graded-Index Multimode Optical Fibers
ANSI/TIA-455-203-2001 Launched Power Distribution Measurement Procedure for Graded-Index Multi-mode Fiber Transmitters
ANSI/TIA/EIA 455-50B-1998 Light Launch Conditions for Long Length Graded-Index Optical Fiber Spectral Attenuation Measurements
ANSI/EIA/TIA 455-24:1991 Water Peak Attenuation Measurement of Single-Mode Fibers
ANSI/TIA/EIA 526-11-1991 Measurement of Single-Reflection Power Penalty for Fiber Optic Terminal Equipment
ANSI/EIA/TIA 526-11:1991 Measurement of Single-Reflection Power Penalty for Fiber Optic Terminal Equipment
ANSI/TIA/EIA 455-38-1995 FOTP 38, Measurement of Fiber Strain in Cables Under Tensile Load
ANSI/TIA/EIA 455-43A-1999 Output Near-Field Radiation Pattern Measurement of Optical Waveguide Fiber
ANSI/TIA-492AAAC-B-2009 Detail Specification for 850-nm Laser- Optimized@ 50-�� Core Diameter/125-�� Cladding Diameter Class Ia Graded-Index Multimode Optical Fibers

International Organization for Standardization (ISO), Transmission in Fiber

ISO 9050:2003 Glass in building - Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
ISO 9050:1990 Glass in building; determination of light transmittance, solar direct transmittance, total solar energy transmittance and ultraviolet transmittance, and related glazing factors
ISO 12239:2021 Smoke alarms using scattered light, transmitted light or ionization
ISO 12239:2010 Smoke alarms using scattered light, transmitted light or ionization
ISO 13468-2:1999 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument
ISO 13468-1:1996 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument
ISO 8599:1994 Optics and optical instruments - Contact lenses - Determination of the spectral and luminous transmittance
ISO 26723:2020 Plastics — Determination of total luminous transmittance and reflectance
ISO 11315-3:1999 Photography - Projection in indoor rooms - Part 3: Classification of transmitting projection screens and measurement of their transmitted luminance levels
ISO 15368:2021 Optics and optical instruments — Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
ISO 19012-3:2015 Microscopes - Designation of microscope objectives - Part 3: Spectral transmittance
ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components
ISO 13794:2019 Ambient air — Determination of asbestos fibres — Indirect-transfer transmission electron microscopy method
ISO 10312:2019 Ambient air — Determination of asbestos fibres — Direct transfer transmission electron microscopy method
ISO/PRF 7240-7 Fire detection and alarm systems — Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization
ISO 7240-7:2023 Fire detection and alarm systems — Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization
ISO 28057:2014 Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy
ISO 14490-5:2017 Optics and photonics - Test methods for telescopic systems - Part 5: Test methods for transmittance
ISO 13837:2008 Road vehicles - Safety glazing materials - Method for the determination of solar transmittance
ISO 4851:1979 Personal eye-protectors; Ultra-violet filters; Utilisation and transmittance requirements
ISO 4852:1978 Personal eye-protectors; Infra-red filters; Utilisation and transmittance requirements
ISO 7240-7:2003 Fire detection and alarm systems - Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization
ISO 7240-7:2018 Fire detection and alarm systems - Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization
ISO 7240-7:2011 Fire detection and alarm systems - Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization
ISO 14490-5:2005 Optics and optical instruments - Test methods for telescopic systems - Part 5: Test methods for transmittance
ISO/IEC 14165-211:1999 Information technology - Fibre channel - Part 211: Mapping to HIPPI-FP (FC-FP)
ISO 28057:2019 Clinical dosimetry — Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy
ISO 22827-1:2005 Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly
ISO 4850:1979 Personal eye-protectors for welding and related techniques; Filters; Utilisation and transmittance requirements

ES-UNE, Transmission in Fiber

UNE 40610:2020 Agrotextiles. Determination of transmittance: Direct and diffuse light
UNE-EN 60793-1-46:2002 Optical fibres -- Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance (Endorsed by AENOR in July of 2002.)
UNE-EN 62805-2:2017 Method for measuring photovoltaic (PV) glass - Part 2: Measurement of transmittance and reflectance (Endorsed by Asociación Española de Normalización in October of 2018.)
UNE-EN 61746-1:2011 Calibration of Optical Time-Domain Reflectometers (OTDR) -- Part 1: OTDR for single-mode fibres (Endorsed by AENOR in May of 2011.)
UNE-EN 61746-2:2011 Calibration of optical time-domain reflectometers (OTDR) -- Part 2: OTDR for multimode fibres (Endorsed by AENOR in May of 2011.)
UNE-EN 61746-1:2011/AC:2014 Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single-mode fibres (Endorsed by AENOR in November of 2014.)
UNE-EN 61746-2:2011/AC:2014 Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR for multimode fibres (Endorsed by AENOR in November of 2014.)
UNE-EN 62788-1-4:2017/A1:2021 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
UNE-EN 62788-1-4:2017 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
UNE-EN 50411-3-3:2019 Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 3-3: Singlemode optical fibre fusion splice protectors (Endorsed by Asociación Española de Normalización in January of...
UNE-EN IEC 62614-1:2020 Fibre optics - Multimode launch conditions - Part 1: Launch condition requirements for measuring multimode attenuation (Endorsed by Asociación Española de Normalización in October of 2020.)
UNE-EN 61753-2-1:2000 Fibre optic interconnecting devices and passive components performance standard -- Part 2-1: Fibre optic connectors terminated on single-mode fibre for category U - Uncontrolled environment. (Endorsed by AENOR in March of 2001.)
UNE-EN 120008:1993 BDS: LIGHT EMITTING DIODES AND INFRARED EMITTING DIODES FOR FIBRE OPTIC SYSTEM OR SUB-SYSTEM. (Endorsed by AENOR in September of 1996.)

European Committee for Standardization (CEN), Transmission in Fiber

prEN 410-1990 Glass in building; determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing characteristics
EN ISO 13468-2:2021 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:2021)
EN ISO 13468-1:2019 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:2019)
EN ISO 13468-2:2006 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument
EN ISO 13468-1:1996 Plastics - Determination of Total Luminous Transmittance of Transparent Materials - Part 1: Single-Beam Instrument ISO 13468-1: 1996
EN ISO 8599:1996 Optics and Optical Instruments - Contact Lenses - Determination of the Spectral and Luminous Transmittance ISO 8599 : 1994
CWA 17857:2022 Lens-based adaptor system for coupling fibre optic to infrared semiconductor lasers
EN ISO 28057:2021 Clinical dosimetry - Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy (ISO 28057:2019)
EN ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components
EN 54-7:1988 Components of Automatic Fire Detection Systems - Part 7: Point-Type Smoke Detectors; Detectors Using Scattered Light, Transmitted Light or Ionization
EN 54-7:2018 Fire detection and fire alarm systems - Part 7: Smoke detectors - Point smoke detectors that operate using scattered light@ transmitted light or ionization
EN 54-7:1982 Components of automatic fire detection systems; Part 7: Point type smoke detectors; Detectors using scattered light, transmitted light or ionization
EN 1787:1996 (WITHDRAWN) Foodstuffs - Detection of Irradiated Food Containing Cellulose - Method by ESR Spectroscopy Superseded by EN 1787:2000

Professional Standard - Building Materials, Transmission in Fiber

JC/T 782-2017 Test method for visible transmittance of glass fiber reinforced plastic

Danish Standards Foundation, Transmission in Fiber

DS/EN 60793-1-46:2002 Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance
DS/EN 379:1994 Specification for welding filters with switchable luminous transmittance and welding filters with dual luminous transmittance
DS/EN 1557:1997 Surface active agents - Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission
DS/EN ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components
DS/EN 61746-1:2011 Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single-mode fibres
DS/EN 61746-2:2011 Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR for multimode fibres
DS/EN 62788-1-4:2020 Measurement procedures for materials used in photovoltaic modules – Part 1-4: Encapsulants – Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
DS/EN 2155-5:1989 Aerospace series. Test methods for transparent materials for aircraft glazing. Part 5: Determination of visible light transmission
DS/EN 50411-3-2:2012 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-2: Singlemode mechanical fibre splice
DS/EN 50411-3-3:2012 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-3: Singlemode optical fibre fusion splice protectors
DS/EN 61341:2011 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
DS/EN ISO 5350-2:2007 Pulps - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp by transmitted light

RU-GOST R, Transmission in Fiber

GOST R IEC 60793-1-46-2014 Optical fibres. Part 1-46. Measurement methods and test procedures. Monitoring of changes in optical transmittance
GOST 8.559-1993 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring the optical density of materials in transmitted light
GOST R 59742-2021 Optics and photonics. Lasers and laser-related equipment. Optical elements for laser equipment. Test methods for specular reflectance and regular transmittance
GOST 27794-1988 Black and white photographic materials on opaque base. Conditions for determination of optical density in reflected light
GOST 19877-1982 Dissolving pulp. Spectral method for determining of elements in pulp
GOST R 57543-2017 Feedstuffs, compound feeds, feed raw materials. Method for determination of crude protein, crude fiber, crude fat and moisture using spectroscopy in the near-in-infrared region measurement mode transmission spectra

International Electrotechnical Commission (IEC), Transmission in Fiber

IEC 60793-1-46:2001 Optical fibres - Part 1-46: Measurement methods and test procedures; Monitoring of changes in optical transmittance
IEC 63085:2021 Radiation protection instrumentation - System of spectral identification of liquids in transparent and semitransparent containers (Raman systems)
IEC 61746-1:2009 Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single-mode fibres
IEC 62805-2:2017 Method for measuring photovoltaic (PV) glass - Part 2: Measurement of transmittance and reflectance
IEC 61746-2:2010 Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR for multimode fibres
IEC 62614:2010 Fibre optics - Launch condition requirements for measuring multimode attenuation
IEC 61747-30-5:2019 Liquid crystal display devices - Part 30-5: Optical measuring methods of transmissive transparent LCD modules
IEC 62802:2017 Measurement method of a half-wavelength voltage and a chirp parameter for Mach-Zehnder optical modulator in high-frequency radio on fibre (RoF) systems
IEC 62788-1-4:2016/AMD1:2020 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness
IEC 62788-1-4:2016 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness
IEC 62788-1-4:2016+AMD1:2020 CSV Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness
IEC 61341:1994 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
IEC 62438:2010 Radiation protection instrumentation - Mobile instrumentation for the measurement of photon and neutron radiation in the environment
IEC 62614-1:2020 Fibre optics - Multimode launch conditions - Part 1: Launch condition requirements for measuring multimode attenuation
IEC 61755-1:2005 Fibre optic connector optical interfaces - Part 1: Optical interfaces for single mode non-dispersion shifted fibres - General and guidance
IEC TR 62721:2012 Reliability of devices used in fibre optic systems - General and guidance
IEC TR 61282-14:2016 Fibre optic communication system design guides - Part 14: Determination of the uncertainties of attenuation measurements in fibre plants
IEC TR 61282-14:2019 RLV Fibre optic communication system design guides - Part 14: Determination of the uncertainties of attenuation measurements in fibre plants
IEC TR 61282-14:2019 Fibre optic communication system design guides - Part 14: Determination of the uncertainties of attenuation measurements in fibre plants

Association Francaise de Normalisation, Transmission in Fiber

NF EN 60793-1-46:2002 Fibres optiques - Partie 1-46 : méthodes de mesure et procédures d'essai - Contrôle des variations du facteur de transmission optique
NF C93-840-1-46*NF EN 60793-1-46:2002 Optical fibres - Part 1-46 : measurement methods and test procedures - Monitoring of changes in optical transmittance
NF S10-049*NF ISO 15368:2021 Optics and photonics - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
NF ISO 15368:2021 Optique et photonique - Mesurage du facteur de réflexion des surfaces planes et du facteur de transmission des éléments à plan parallèle
NF S10-114*NF EN ISO 13697:2006 Optics and phonotics - Lasers and laser-related equipment - Test methods for specular reflectance and transmittance of optical laser components.
NF C93-804-1*NF EN 61746-1:2014 Calibration of optical time-domain reflectometers (OTDR) - Part 1 : OTDR for single-mode fibres
NF EN ISO 13697:2006 Optique et photonique - Lasers et équipements associés aux lasers - Méthodes d'essai du facteur de réflexion spéculaire et du facteur de transmission des composants optiques laser
NF V03-003:1997 FOODSTUFFS. DETECTION OF IRRADIATED FOOD CONTAINING CELLULOSE. METHOD BY ESR SPECTROSCOPY. (EUROPEAN STANDARD EN 1787).
NF C57-805-2*NF EN 62805-2:2017 Method for measuring photovoltaic (PV) glass - Part 2 : Measurement of transmittance and reflectance
NF EN 62788-1-4/A1:2020 Procédures de mesure des matériaux utilisés dans les modules photovoltaïques - Partie 1-4 : encapsulants - Mesurage du facteur de transmission optique et calcul du facteur de transmission photonique à pondération solaire, de l'indice de jaunisse...
NF EN 62788-1-4:2017 Procédures de mesure des matériaux utilisés dans les modules photovoltaïques - Partie 1-4 : Encapsulants - Mesurage du facteur de transmission optique et calcul du facteur de transmission photonique à pondération solaire, de l'indice de jaunisse...
NF EN 60793-2-70:2017 Fibres optiques - Partie 2-70 : spécifications de produits - Spécification intermédiaire pour les fibres à maintien de polarisation
NF S10-049:2003 Optics and optical instruments - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements.
NF X43-067*NF ISO 10312:2020 Ambient air - Determination of asbestos fibres - Direct transfer transmission electron microscopy method
NF X43-054*NF ISO 13794:2020 Ambient air - Determination of asbestos fibres - Indirect-transfer transmission electron microscopy method
NF EN 62805-2:2017 Méthode de mesure du verre photovoltaïque (PV) - Partie 2 : mesurage du facteur de transmission et du facteur de réflexion
NF EN 61746-1:2014 Étalonnage des réflectomètres optiques dans le domaine temporel (OTDR) - Partie 1 : OTDR pour fibres unimodales
NF EN 61746-2:2016 Étalonnage des réflectomètres optiques dans le domaine temporel (OTDR) - Partie 2 : OTDR pour fibres multimodales
NF Q03-040*NF ISO 2471:2009 Paper and board - Determination of opacity (paper backing) - Diffuse reflectance method.
NF EN IEC 60793-2-50:2019 Fibres optiques - Partie 2-50 : spécifications de produits - Spécification intermédiaire pour les fibres unimodales de classe B
NF EN IEC 60793-2-10:2019 Fibres optiques - Partie 2-10 : spécifications de produits - Spécification intermédiaire pour les fibres multimodales de catégorie A1
NF EN 60793-2-30:2015 Fibres optiques - Partie 2-30 : spécifications de produits - Spécification intermédiaire pour les fibres multimodales de catégorie A3
NF EN 60793-2-20:2017 Fibres optiques - Partie 2-20 : spécifications de produits - Spécification intermédiaire pour les fibres multimodales de catégorie A2
NF EN IEC 60793-2-10/A1:2022 Fibres optiques - Partie 2-10 : spécifications de produits - Spécification intermédiaire pour les fibres multimodales de catégorie A1
NF EN IEC 60793-2-40:2021 Fibres optiques - Partie 2-40 : spécifications de produits - Spécification intermédiaire pour les fibres multimodales de catégorie A4
NF EN 60793-2-50:2017 Fibres optiques - Partie 2-50 : spécifications de produits - Spécification intermédiaire pour les fibres unimodales de classe B
NF EN ISO 12625-16:2015 Papier tissue et produits tissues - Partie 16 : détermination des propriétés optiques - Opacité sur fond papier - Méthode par réflexion en lumière diffuse
NF EN 50411-4-1:2019 Organiseurs et boîtiers de fibres à utiliser dans les systèmes de communication par fibres optiques - Spécifications de produits - Partie 4-1 : armoire située dans un environnement urbain pour fibres optiques passives, pour la catégorie A
NF ISO 2471:2009 Papier et carton - Détermination de l'opacité sur fond papier - Méthode de réflexion en lumière diffuse
NF C94-243:2017 Transmitting equipment for radiocommunication - Frequency response of optical-to-electric conversion device in high-frequency radio over fibre systems - Measurement method
NF C57-788-1-4*NF EN 62788-1-4:2017 Measurement procedures for materials used in photovoltaic modules - Part 1 -4 : Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
NF C93-804-2*NF EN 61746-2:2016 Calibration of optical time-domain reflectometers (OTDR) - Part 2 : OTDR for multimode fibres
NF ISO 10312:2020 Air ambiant - Dosage des fibres d'amiante - Méthode par microscopie électronique à transmission par transfert direct
NF EN 50411-3-6:2022 Systèmes de gestion des fibres et boîtiers de protection destinés à être utilisés dans les systèmes de communication par fibres optiques - Spécifications de produits - Partie 3-6 : epissure mécanique de fibres multimodales
NF M60-565:2014 Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy
NF EN 50411-3-3:2019 Organiseurs et boîtiers de fibres destinés à être utilisés dans les systèmes de communication par fibres optiques - Spécifications de produits - Partie 3-3 : protecteurs d'épissures par fusion de fibres optiques unimodales
NF EN 60874-19:1997 Connecteurs pour fibres et câbles optiques - Partie 19 : spécification intermédiaire pour connecteur pour fibres optiques. Type SC-D(uplex).
NF EN 60874-17:1998 Connecteurs pour fibres et câbles optiques - Partie 17 : spécification intermédiaire pour connecteur pour fibres optiques. Type F-05 (verrouillage par friction).
NF L17-600-05*NF EN 2155-5:1989 Aerospace industry. Test methods for transparent materials for aircraft glazing. Part 5 : determination of visible light transmission.
NF S61-987*NF EN 54-7:2001 Fire detection and fire alarm systems - Part 7 : smoke detectors - Point detectors using scattered light, transmitted light or ionization
NF S61-960-7*NF EN 54-7:2018 Fire detection and fire alarm systems - Part 7 : smoke detectors - Point detectors using scattered light, transmitted light or ionization
NF EN ISO 5350-2:2006 Pâtes - Estimation des impuretés et bûchettes - Partie 2 : examen des pâtes en feuilles par lumière transmise
NF EN 61753-022-2:2013 Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 022-2 : connecteurs à fibres optiques raccordés à une fibre multimodale pour la catégorie C - Environnement contrôlé

国家市场监督管理总局、中国国家标准化管理委员会, Transmission in Fiber

GB/T 2680-2021 Glass in building—Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Transmission in Fiber

GB/T 2680-1994 Determination of light transmittance,solar direct transmittance,total solar energy transmittance and ultraviolet transmittance for glass in building and related glazing factors
GB/T 25968-2010 Test methods of solar transmittance and solar absorptance of materials by spectrophotometer
GB/T 19658-2005 Method of measurement of center beam intensity and beam angle(s)of reflector lamps
GB/T 19658-2013 Method of measurement of center beam intensity and beam angle(s) of reflector lamps
GB/T 11213.7-1989 Sodium hydroxide for chemical fiber use--Determination of copper mass fraction--Spectrometric method
GB/T 29787-2013 Radiation protection instrumentation.Mobile instrumentation for the measurement of photon and neutron radiation in the environment
GB/T 2590.9-1981 Hafnium oxide--Determination of zirconium oxide content--X-ray fluorescence spectrometric method
GB/T 11213.2-1989 Sodium hydroxide for chemical fiber use--Determination of sodium chloride content--Spectrometric method
GB/T 18904.1-2002 Semiconductor devices-Part 12-1: Optoelectronic devices-Blank detail specification for light emitting/infrared emitting diodes with/without pigtail for fiber optic systems or sub-systems
GB/T 15972.46-2008 Specifications for optical fibre test methods.Part 46:Measurement methods and test procedures for transmission and optical characteristics.Monitoring of changes in optical transmittance

Korean Agency for Technology and Standards (KATS), Transmission in Fiber

KS B ISO 12239:2021 Smoke alarms using scattered light, transmitted light or ionization
KS M ISO 22891:2014 Paper — Determination of transmittance by diffuse reflectance mesurement
KS M ISO 22891:2020 Paper — Determination of transmittance by Paper — Determination of transmittance by
KS I ISO 13794-2008(2018) Ambient air－Determination of asbestos fibres－Indirect-transfer transmission electron microscopy method
KS B ISO 8599:2004 Optics and optical instruments-Contact lenses-Determination of the spectral and luminous transmittance
KS B ISO 8599:2014 Optics and optical instruments — Contact lenses — Determination of the spectral and luminous transmittance
KS M ISO 13468-1:2007 Plastics－Determination of the total luminous transmittance of transparent materials－Part 1：Single beam instrument
KS M ISO 13468-2:2007 Plastics－Determination of the total luminous transmittance of transparent materials－Part 2：Double-beam instrument
KS B ISO 15368-2006(2016) Optics and optical instruments — Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
KS C 6941-2014 Measuring methods of transmitting and/or receiving modules for middle and high speed fiber optic transmission
KS C 6940-2014 General rules of transmitting and/or receiving modules for middle and high speed fiber optic transmission
KS M ISO 13468-1-2007(2017) Plastics－Determination of the total luminous transmittance of transparent materials－Part 1：Single beam instrument
KS C IEC 61746:2009 Calibration of optical time-domain reflectometers(OTDR)
KS C IEC 61746:2013 Calibration of optical time-domain reflectometers(OTDR)
KS B ISO 15368-2006(2021) Optics and optical instruments — Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
KS I ISO 10312-2008(2018) Ambient air－Determination of asbestos fibers－Direct-transfer transmission electron microscopy method
KS B ISO 7240-7:2020 Fire detection and alarm systems — Part 7：Point-type smoke detectors using scattered light, transmitted light or ionization
KS B ISO 7240-7:2007 Fire detection and alarm systems－Part 7：Point-type smoke detectors using scattered light, transmitted light or ionization
KS M ISO 5350-2:2007 Pulps－Estimation of dirt and shives－Part 2：Inspection of mill sheeted pulp by transmitted light
KS M ISO 5350-2:2017 Pulps－Estimation of dirt and shives－Part 2：Inspection of mill sheeted pulp by transmitted light
KS X ISO/IEC 14165-211:2007 Information technology-Fibre Channel-Part 211:Mapping to HIPPI-FP(FC-FP)
KS X ISO/IEC 14165-211:2013 Information technology－Fibre Channel－Part 211：Mapping to HIPPI-FP(FC-FP)
KS C IEC 61341-2014(2019) Method of measurement of centre beam intensity and beam angle(s) of reflector lamps

KR-KS, Transmission in Fiber

KS B ISO 12239-2021 Smoke alarms using scattered light, transmitted light or ionization
KS M ISO 22891-2020 Paper — Determination of transmittance by Paper — Determination of transmittance by
KS B 5426-2023 Method for measuring spectral transmittance of a photographic lenses
KS B ISO 7240-7-2020 Fire detection and alarm systems — Part 7：Point-type smoke detectors using scattered light, transmitted light or ionization

TIA - Telecommunications Industry Association, Transmission in Fiber

TIA/EIA-455-64-1998 FOTP-64 Procedure for Measuring Radiation-Induced Attenuation in Optical Fibers and Optical Cables
TIA-455-53A-1990 FOTP-53 Attenuation by Substitution Measurement for Multimode Graded-Index Optical Fibers or Fiber Assemblies Used in Long Length Communications Systems
TSB-62-10-2008 Procedure for Applying Loads Directly to the Fiber in Optical Connectors or Fiber/Ferrule Assemblies to Quantify Fiber Pushback
EIA/TIA-455-58A-1990 FOTP-58 Core Diameter Measurement of Graded-Index Optical Fibers
EIA/TIA-455-42A-1989 FOTP-42 Optical Crosstalk in Fiber Optic Components
TSB62-10-1999 ITM-10 Procedure for Applying Loads Directly to the Fiber in Optical Connectors or Fiber/Ferrule Assemblies to Quantify Fiber Pushback
EIA/TIA-455-46A-1990 FOTP-46 Spectral Attenuation Measurement for Long-Length@ Graded-Index Optical Fibers
TIA/EIA-455-194-1999 FOTP-194 Measurement of Fiber Pushback in Optical Connectors
455-50A-1987 FOTP-50 Light Launch Conditions for Long-Length Graded-Index Optical Fiber Spectral Attenuation Measurements
TIA/EIA-455-50B-1998 FOTP-50 Light Launch Conditions for Long-Length Graded-Index Optical Fiber Spectral Attenuation Measurements
TIA/EIA-455-53A-1990 FOTP-53 Attenuation by Substitution Measurement for Multimode Graded-Index Optical Fibers or Fiber Assemblies Used in Long Length Communications Systems (Revision of EIA-455-53)
TIA/EIA-455-115-1996 FOTP-115 Spectral Attenuation Measurement of Step-Index Multimode Optical Fibers
EIA-455-43-1984 FOTP-43 Output Near-Field Radiation Pattern Measurement of Optical Waveguide Fibers
TIA/EIA-455-43A-1999 FOTP-43 Output Near-Field Radiation Pattern Measurement of Optical Waveguide Fibers
TIA-455-177-A-1992 FOTP177 Numerical Aperture Measurement of Graded-Index Optical Fibers
TSB-4947-2015 Guidance for Adhesive Usage in Fiber Optic Components
TSB120-2000 Polarization Maintaining Fiber in Telecommunications: Applications and Challenges
EIA/TIA-455-49A-1989 FOTP-49 Procedure for Measuring Gamma Irradiation Effects in Optical Fiber and Optical Cables
TIA-455-50-B-1998 FOTP 50 Light Launch Conditions for Long-Length Graded-Index Optical Fiber Spectral Attenuation Measurements (ANSI APPROVAL WITHDRAWN JUNE 2003)
TIA/EIA-492AA00-A-1998 Blank Detail Specification for Class Ia Graded-Index Multimode Optical Fibers
492A000-1987 Sectional Specification for Class la Multimode@ Graded-Index Optical Waveguide Fibers
TIA-455-46A-1990 FOTP-46 Spectral Attenuation Measurement for Long-Length@ Graded-Index Optical Fibers (Revision of EIA-455-46)
TIA/EIA-526-11-1991 OFSTP-11 Measurement of Single-Reflection Power Penalty for Fiber Optic Terminal Equipment
EIA/TIA-492AAAA-1989 Detail Specification for 62.5-Micrometer Core Diameter/125-Micrometer Cladding Diameter Class la Multimode@ Graded Index Optical Waveguide Fibers
TIA-492AAAD-2009 Detail Specification for 850-nm Laser- Optimized@ 50-μm Core Diameter/125-μm Cladding Diameter Class la Graded-Index Multimode Optical Fibers Suitable for Manufacturing OM4 Cabled Optical Fiber
TIA/EIA-455-203-2001 FOTP-203 Launched Power Distribution Measurement Procedure for Graded-Index Multimode Fiber Transmitters

Japanese Industrial Standards Committee (JISC), Transmission in Fiber

JIS K 7375:2008 Plastics -- Determination of total luminous transmittance and reflectance
JIS C 5934:1999 General rules of lenses for fiber optic transmission
JIS C 5935:2005 Measurement methods of lenses for fiber optic transmission
JIS B 7144:1995 Microscope -- Connection of condensers for transmitted light with substage sleeves
JIS K 7361-1:1997 Plastics -- Determination of the total luminous transmittance of transparent materials -- Part 1: Single beam instrument
JIS B 7107:1997 Photography -- Camera lenses -- Measurement of ISO spectral transmittance
JIS K 3850-3:2000 Measuring method for airborne fibrous particles -- Part 3: Indirect-transfer transmission electron microscopy method
JIS K 3850-2:2000 Measuring method for airborne fibrous particles -- Part 2: Direct-transfer transmission electron microscopy method
JIS R 1635:1998 Test method for visible light transmittance of fine ceramic thin films
JIS C 6113:1997 Measuring methods of transmitting and/or receiving modules for middle and high speed fiber optic transmission
JIS C 6112:1996 General rules of transmitting and/or receiving modules for middle and high speed fiber optic transmission
JIS R 1694:2012 Measurement of spectral transmittance of fine ceramic thin films under humid condition
JIS C 6185-2:2014 Optical time-domain reflectometers (OTDR) -- Part 2: Calibration of OTDR for single mode fibers
JIS B 7158-3:2017 Microscopes -- Designation of microscope objectives -- Part 3: Spectral transmittance
JIS C 6185-3:2014 Optical time-domain reflectometers (OTDR).Part 3: Calibration of OTDR for multimode fibers
JIS C 6111:1997 Measuring methods of transmitting and receiving modules for low speed fiber optic transmission
JIS T 7333:2005 Ophthalmic optics -- Uncut finished spectacle lenses -- Transmittance specifications and test methods
JIS C 5955-2:2022 Fiber optic active components and devices -- Performance standard template -- Part 2: Optical transmitting and/or receiving modules for multi fiber parallel transmission link

ZA-SANS, Transmission in Fiber

SANS 6154:2006 Glass content of granulated metallurgical slag (transmitted-light microscopy method)
SANS 50054-7:2000 Fire detection and fire alarm systems Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization

Lithuanian Standards Office , Transmission in Fiber

LST EN 181102-2001 Blank detail specification. Fibre optic branching devices. Type: Wavelength selective transmissive star
LST EN 60793-1-46-2003 Optical fibres. Part 1-46: Measurement methods and test procedures. Monitoring of changes in optical transmittance (IEC 60793-1-46:2001)
LST EN 181101-2001 Blank detail specification. Fibre optic branching devices. Type: Non wavelength selective transmissive star
LST EN 1557-2002 Surface active agents - Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission
LST EN 181104-2001 Blank detail specification. Fibre optic branching devices. Type: Wavelength selective transmissive star for telecommunication application
LST EN 181103-2001 Blank detail specification. Fibre optic branching devices. Type: Non wavelength selective transmissive star for telecommunication application
LST EN ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006)
LST EN 61746-1-2011/AC-2014 Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single-mode fibres
LST EN 50411-3-2-2011 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications -- Part 3-2: Singlemode mechanical fibre splice
LST EN 61746-1-2011 Calibration of optical time-domain reflectometers (OTDR) -- Part 1: OTDR for single-mode fibres (IEC 61746-1:2009)
LST EN 61746-2-2011 Calibration of optical time-domain reflectometers (OTDR) -- Part 2: OTDR for multimode fibres (IEC 61746-2:2010)
LST EN 50411-3-3-2012 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications -- Part 3-3: Singlemode optical fibre fusion splice protectors
LST EN 62614-2011 Fibre optics - Launch condition requirements for measuring multimode attenuation (IEC 62614:2010)
LST EN 62788-1-4/A1-2021 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength (IEC 62788-1-4:2016/A

Professional Standard - Machinery, Transmission in Fiber

JB/T 11253-2011 Grating (lenticular) lens in projection display
JB/T 8248.1-1999 Method for determining the spectral transmissivity of camera lenses

Standard Association of Australia （SAA）, Transmission in Fiber

AS 3786:2023 Smoke alarms using scattered light, transmitted light or ionization (ISO 12239:2021, MOD)
AS/NZS 4257.4:1994 Plastic roof and wall cladding materials - Methods of test - Determination of diffuse light transmission
AS 7240.7:2004 Fire detection and alarm systems - Point-type smoke detectors using scattered light, transmitted light or ionization (ISO 7240-7:2003, MOD)
AS 7240.7:2018 Fire detection and alarm systems, Part 7: Point type smoke detectors using scattered light, transmitted light or ionization (ISO 7240-7:2018, MOD)

American Society for Testing and Materials (ASTM), Transmission in Fiber

ASTM E1614-94(1999) Standard Guide for Procedure for Measuring Ionizing Radiation-Induced Attenuation in Silica-Based Optical Fibers and Cables for Use in Remote Fiber-Optic Spectroscopy and Broadband Systems
ASTM D4093-95(2005)e1 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM D4093-95(2001)e1 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM D4093-23 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM D4093-95(2010) Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM D4093-95(2014) Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM D4093-95 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM D1494-97(2001)e1 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
ASTM D1494-97(2001) Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
ASTM D1494-12 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
ASTM E972-96(2021) Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight
ASTM D1494-22 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
ASTM D1494-17 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
ASTM F1252-89(2002) Standard Test Method for Measuring Optical Reflectivity of Transparent Materials
ASTM F1252-89(1996) Standard Test Method for Measuring Optical Reflectivity of Transparent Materials
ASTM F1252-08 Standard Test Method for Measuring Optical Reflectivity of Transparent Materials
ASTM F1252-21 Standard Test Method for Measuring Optical Reflectivity of Transparent Materials
ASTM E971-88(2003) Standard Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation
ASTM E971-88(1996)e1 Standard Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation
ASTM E971-11(2019) Standard Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation
ASTM F2366-05 Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus
ASTM F2366-05(2011) Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus
ASTM F2366-12 Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus
ASTM F1252-10 Standard Test Method for Measuring Optical Reflectivity of Transparent Materials
ASTM E2193-16 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
ASTM E1654-94(1999) Standard Guide for Measuring Ionizing Radiation-Induced Spectral Changes in Optical Fibers and Cables for Use in Remote Raman FiberOptic Spectroscopy
ASTM E1654-94(2004) Standard Guide for Measuring Ionizing Radiation-Induced Spectral Changes in Optical Fibers and Cables for Use in Remote Raman FiberOptic Spectroscopy
ASTM E1653-94(2013) Standard Guide for Specifying Dynamic Characteristics of Optical Radiation Transmitting Fiber Waveguides
ASTM E1653-94(2021) Standard Guide for Specifying Dynamic Characteristics of Optical Radiation Transmitting Fiber Waveguides
ASTM D2929-89(2011) Standard Test Method for Sulfur Content of Cellulosic Materials by X-Ray Fluorescence
ASTM E903-96 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
ASTM E971-11 Standard Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation
ASTM F1252-16 Standard Test Method for Measuring Optical Reflectivity of Transparent Materials
ASTM E1654-94(2013) Standard Guide for Measuring Ionizing Radiation-Induced Spectral Changes in Optical Fibers and Cables for Use in Remote Raman FiberOptic Spectroscopy
ASTM E1654-94(2021) Standard Guide for Measuring Ionizing Radiation-Induced Spectral Changes in Optical Fibers and Cables for Use in Remote Raman FiberOptic Spectroscopy
ASTM F768-82(1987)e1 Method for Specular Reflectance and Transmittance Measurements of Optically Flat-Coated and Non-Coated Specimens
ASTM E1348-11 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E1348-22 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E903-12 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
ASTM E387-84(1995)e1 Standard Test Method for Estimating Stray Radiant Power Ratio of Spectrophotometers by the Opaque Filter Method
ASTM E387-04 Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM E387-04(2009) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM E1084-86(2023) Standard Test Method for Solar Transmittance (Terrestrial) of Sheet Materials Using Sunlight
ASTM E1614-94(2021) Standard Guide for Procedure for Measuring Ionizing Radiation-Induced Attenuation in Silica-Based Optical Fibers and Cables for Use in Remote Fiber-Optic Spectroscopy and Broadband Systems
ASTM E1614-94(2013) Standard Guide for Procedure for Measuring Ionizing Radiation-Induced Attenuation in Silica-Based Optical Fibers and Cables for Use in???Remote???Fiber-Optic Spectroscopy???and Broadband???Systems
ASTM E1614-94(2004) Standard Guide for Procedure for Measuring Ionizing Radiation-Induced Attenuation in Silica-Based Optical Fibers and Cables for Use in Remote Fiber-Optic Spectroscopy and Broadband Systems
ASTM D8193-18 Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy
ASTM E1348-90 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E2193-23 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
ASTM E387-04(2022) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM E387-04(2014) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM D7806-20 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Ester) and Triglyceride Content in Diesel Fuel Oil Using Mid-Infrared Spectroscopy (FTIR Transmission Method)
ASTM E1084-86(1996) Standard Test Method for Solar Transmittance (Terrestrial) of Sheet Materials Using Sunlight
ASTM F3094-14 Standard Test Method for Determining Protection Provided by X-ray Shielding Garments Used in Medical X-ray Fluoroscopy from Sources of Scattered X-Rays
ASTM E1361-90(1999) Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM E1361-02(2021) Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM D4085-93(1997) Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
ASTM D4085-93(2003) Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
ASTM E2002-15 Standard Practice for Determining Total Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy
ASTM E2861-16 Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams

未注明发布机构, Transmission in Fiber

BS EN ISO 8599:1997 Optics and optical instruments — Contact lenses — Determination ofthe spectral and luminous transmittance
BS EN 61746-1:2011(2014) Calibration of optical time - domain reflectometers (OTDR) Part 1 : OTDR for single - mode fibres
BS EN 61746-2:2011(2014) Calibration of optical time - domain reflectometers (OTDR) Part 2 : OTDR for multimode fibres
BS EN 2155-5:1989(1999) Test methods for transparent materials for aircraft glazing — Part 5 : Determination ofvisible light transmission
BS EN 50411-3-2:2023 Fibre management systems and protective housings to be used in optical fibre communication systems — Product specifications Part 3 - 2 : Single - mode mechanical fibre splice
DIN EN 54-7:2001 Fire detection and fire alarm systems – Part 7: Smoke detectors – Point detectors using scattered light, transmitted light or ionization

AENOR, Transmission in Fiber

UNE-EN 1557:1997 SURFACE ACTIVE AGENTS. COLORIMETRIC CHARACTERIZATION OF OPTICALLY CLEAR COLOURED LIQUIDS (PRODUCTS) AS X, Y, Z TRISTIMULUS VALUES IN TRANSMISSION.
UNE-EN ISO 13697:2007 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006)
UNE 77253:2003 Ambient air. Determination of asbestos fibres -- Indirect-transfer transmission electron microscopy method
UNE 77236:1999 AMBIENT AIR. DETERMINATION OF ASBESTOS FIBRES. DIRECT-TRANSFER TRANSMISSION ELECTRON MICROSCOPY METHOD.
UNE-EN 2155-5:1992 AEROSPACE SERIES. TEST METHODS FOR TRANSPARENT MATERIALS FOR AIRCRAFT GLAZING. PART 5: DETERMINATION OF VISIBLE LIGHT TRANSMISSION.
UNE-EN 61341:2012 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
UNE-EN 54-7/A1:2002 Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization.
UNE-EN 54-7:2001 Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization.
UNE-EN 54-7:2001/A2:2007 Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization

RO-ASRO, Transmission in Fiber

STAS 10138-1975 PENETRANT RADIATION TESTING Guidances for radiographs viewing
STAS 10949-1977 DETERMINATION OF OPTICAL DENSITY BY REFLE-, XION .OF IMAGES ON OPAQUE SUPPORTS

PL-PKN, Transmission in Fiber

PN-EN 62788-1-4-2017-02/A1-2021-07 E Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
PN C99465-09-1993 Photography. Determination of basic sensitometric values at reflected light for coloured materials on opaque base
PN M51004-07-1992 Componcnts of automatic fire detection systems Part 7. Point type smoke detectors Detectors using scattered light, transmitted light or ionization

European Committee for Electrotechnical Standardization（CENELEC）, Transmission in Fiber

EN 62788-1-4:2016 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
EN 62805-2:2017 Method for measuring photovoltaic (PV) glass - Part 2: Measurement of transmittance and reflectance
EN 61746-2:2011 Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR for multimode fibres
EN 60793-1-46:2002 Optical Fibres Part 1-46: Measurement Methods and Test Procedures - Monitoring of Changes in Optical Transmittance
EN 61746-1:2011 Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single-mode fibres
EN 62803:2016 Transmitting equipment for radiocommunication - Frequency response of optical-to-electric conversion device in highfrequency radio over fibre systems - Measurement method
EN 50411-3-6:2022 Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 3-6: Multi- mode mechanical fibre splice
EN 50411-3-2:2023 Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 3-2: Single-mode mechanical fibre splice
EN 62802:2017 Measurement methods of a half-wavelength voltage and a chirp parameter for Mach-Zehnder optical modulators in highfrequency radio on fibre (RoF) Systems
EN IEC 62614-1:2020 Fibre optics - Multimode launch conditions - Part 1: Launch condition requirements for measuring multimode attenuation

International Telecommunication Union (ITU), Transmission in Fiber

ITU-R F.1332-1-1999 Radio-Frequency Signal Transported Through Optical Fibres
ITU-T G.651.1-2007 Characteristics of a 50/125 ?m multimode graded index optical fibre cable for the optical access network (Study Group 15)
ITU-T L.66-2007 Optical fibre cable maintenance criteria for in-service fibre testing in access networks (Study Group 6)
ITU-T L.313-2007 Optical fibre cable maintenance criteria for in-service fibre testing in access networks
ITU-T L.26 FRENCH-2002 Optical Fibre Cables for Aerial Application Study Group 6
ITU-T G.651.1 AMD 1-2008 Characteristics of a 50/125 µm multimode graded index optical fibre cable for the optical access network Amendment 1: New Appendix I Historical perspective on the evolution of the specification of multimode optical fibre cable Study Group 15
ITU-R BO.788-1 SPANISH-1994 Coding Rate for Virtually Transparent Studio Quality HDTV Emissions in the Broadcasting-Satellite Service Velocidad de codificaci髇 de las emisiones de televisi髇 de alta definici髇 con calidad de estudio virtualmente transparentes del servicio de radiod

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Transmission in Fiber

ITU-R F.1332-1997 Radio-Frequency Signals Transported Through Optical Fibres
ITU-R BO.788-1-1994 Coding Rate for Virtually Transparent Studio Quality HDTV Emissions in the Broadcasting-Satellite Service

Insulated Cable Engineers Association （ICEA), Transmission in Fiber

ICEA S-112-718-2008 OPTICAL FIBER CABLE FOR PLACEMENT IN SEWER ENVIRONMENTS

GOSTR, Transmission in Fiber

GOST R 57696-2017 Polymer composites. Method for determination of diffuse light transmission factor of building panels

US-FCR, Transmission in Fiber

FCR FED H-08-3 801-4-1987 RACEWAYS IN FLUOROSCOPIC, RADIOGRAPHIC, AND DEEP THERAPY ROOMS

工业和信息化部, Transmission in Fiber

YB/T 4676-2018 Analysis of Precipitated Phases in Steel by Transmission Electron Microscopy

Professional Standard - Nuclear Industry, Transmission in Fiber

EJ/T 1092-1999 Determination of gaps between uranium dioxide pellets in fuel rod by γ-ray transmission method

Professional Standard - Electron, Transmission in Fiber

SJ/T 10938-1996 Methods of measurement for light transmissivity (τ546) for color picture tube glass panel

European Telecommunications Standards Institute (ETSI), Transmission in Fiber

ETSI ETR 126-1994 Transmission and Multiplexing (TM); Applications of Optical Fibre Amplifiers in Long Distance and Optical Access Networks

CEN - European Committee for Standardization, Transmission in Fiber

EN ISO 28057:2018 Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy

CZ-CSN, Transmission in Fiber

CSN 80 0311-1975 Deteclion of ripeness of cotton fibres in polarized liglit
CSN 50 0240-1989 Forming handsheets of fibrous materials for optical tests

IEC - International Electrotechnical Commission, Transmission in Fiber

PAS 62614-2009 Fibre optics - Launch condition requirements for measuring multimode attenuation (Edition 1.0)

Institute of Electrical and Electronics Engineers (IEEE), Transmission in Fiber

IEEE P1682/D3, May 2022 IEEE Draft Standard for Qualifying Fiber Optic Cables, Connections, and Optical Fiber Splices for Use in Safety Systems in Nuclear Power Generating Stations
IEEE P1682/D4, October 2022 IEEE Draft Standard for Qualifying Fiber Optic Cables, Connections, and Optical Fiber Splices for Use in Safety Systems in Nuclear Power Generating Stations
IEEE P802.3cz/D3.01, September 2022 IEEE Draft Standard for Ethernet Amendment 7: Physical Layer Specifications and Management Parameters for multi-gigabit optical Ethernet using graded-index glass optical fiber for application in the automotive environment

Professional Standard - Chemical Industry, Transmission in Fiber

HG/T 5854～5857-2021 Coated reflective films for optical functional films, triacetyl cellulose (TAC) anti-glare films, anti-fouling cured films, and transparent cured films for cover plates (2021)

Professional Standard - Commodity Inspection, Transmission in Fiber

SN/T 2489-2010 Determination of Cr、Mn、P、Si contents in pig-irons-Photoelectric emission spectroscopic method
SN/T 2764-2011 Determination of Multiple Components in Fluorite by X-ray Fluorescence Spectrometry

Society of Automotive Engineers (SAE), Transmission in Fiber

SAE AMS2647C-2009 Fluorescent Penetrant Inspection Aircraft and Engine Component Maintenance
SAE J576-1991 Plastic Materials for Use in Optical Parts Such as Lenses and reflectors of Motor Vehicle Lighting Devices

Jilin Provincial Standard of the People's Republic of China, Transmission in Fiber

DB22/T 1994-2013 Determination of copper, iron, manganese and zinc in feed X-ray fluorescence spectrometry

CH-SNV, Transmission in Fiber

CENELEC - European Committee for Electrotechnical Standardization, Transmission in Fiber

PREN 50411-3-3-2018 Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 3-3: Singlemode optical fibre fusion splice protectors
EN 50411-2-8:2009 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-8: Microduct connectors@ for air blown optical fibres@ Type 1
EN 50411-3-1:2012 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-1: Fibre management system@ splice wall box@ for category C & G

SE-SIS, Transmission in Fiber

SIS SS-EN 54/7-1986 Components of automatic fire detection systems - Part 7: Point type smoke detectors - Detectors using scattered light transmitted light or ionization

Professional Standard - Non-ferrous Metal, Transmission in Fiber

YS/T 361-2006 Determination of trace impurities in purity platinum by atomic emission spectrometric
YS/T 362-2006 Determination of trace impurities in purity palladium by atomic emission spectrometric
YS/T 363-2006 Determination of trace impurities in purity rhodium by atomic emission spectrometric
YS/T 364-2006 Determination of trace impurities in purity iridium by atomic emission spectrometric
YS/T 361-1994 Emission Spectral Analysis of Impurity Elements in Pure Platinum
YS/T 362-1994 Emission spectrum analysis of impurity elements in pure palladium
YS/T 363-1994 Emission spectrum analysis of impurity elements in pure rhodium
YS/T 364-1994 Emission Spectral Analysis of Impurity Elements in Pure Iridium
YS/T 568.9-2006 Determination of the amount of zirconia in hafnium oxide (X-ray fluorescence spectrometry)

AT-OVE/ON, Transmission in Fiber

OVE EN 50411-3-6-2021 Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 3-6: Multi- mode mechanical fibre splice (english version)
OVE EN 50411-3-2-2021 Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 3-2: Single-mode mechanical fibre splice (english version)

Professional Standard - Agriculture, Transmission in Fiber

SN/T 3797-2014 Screening method for zirconia fibers in building refractory materials X-ray diffraction method

FI-SFS, Transmission in Fiber

SFS 5177 E-1985 This standard is approved in English

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Transmission in Fiber

PREN 2155-5-1984 Test Methods for Transparent Materials for Aircraft Glazing Part 5 - Determination of Visible Light Transmission Aerospace Series (Edition 1)