ZH
RU
ES

adsorption isotherm

adsorption isotherm, Total:212 items.

In the international standard classification, adsorption isotherm involves: Physics. Chemistry, Construction materials, Coals, Testing of metals, Extraction and processing of petroleum and natural gas, Wastes, Inorganic chemicals, Water quality, Measurement of volume, mass, density, viscosity, Protection of and in buildings, Geology. Meteorology. Hydrology, Ferrous metals, Fishing and fish breeding, Tea. Coffee. Cocoa, Farming and forestry, Medical sciences and health care facilities in general, Road vehicle systems, Iron and steel products, Analytical chemistry, Products of the chemical industry, Materials for aerospace construction, Standardization. General rules, Non-ferrous metals, Wind turbine systems and other alternative sources of energy, Metrology and measurement in general, Thermodynamics and temperature measurements, Leisure. Tourism, Chipless working equipment, Electrical accessories, Sterilization and disinfection, Burners. Boilers, Valves, Refrigerating technology, Graphical symbols, Fuels, Petroleum products in general, Protection against dangerous goods, Pipeline components and pipelines, Equipment for the chemical industry, Veterinary medicine, Mechanical testing, Electrical wires and cables, Services, Fasteners for aerospace construction, Conducting materials, Organic chemicals.

German Institute for Standardization, adsorption isotherm

DIN 66138:2008 Isothermal measurement of the sorption of vapours at solids
DIN 66138:2008-09 Isothermal measurement of the sorption of vapours at solids
DIN 66135-2:2001-06 Particle characterization - Micropore analysis by gas adsorption - Part 2: Evaluation by isotherms comparison
DIN EN 3377:1996 Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3377:1996

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, adsorption isotherm

GB/T 19560-2008 Experimental method of high-pressure isothermal adsorption to coal
GB/T 19560-2004 Experimental method of high-pressure adsorption isothermal to coal capacity method
GB/T 35210.1-2023 Determination of isothermal adsorption/desorption of methane in shale—Part 1: Static volumetric method
GB/T 29457-2012 Grade of the heat wave
GB/T 24733-2009 Austempered ductile iron (ADI) castings
GB/T 24733-2023 Isothermal quenching ductile iron castings
GB/T 32309-2015 Hydrogen Peroxide Low Temperature Plasma Sterilizer
GB/T 5058-1985 Steel--Determination of isothermal transformation diagram--Magnetic method

国家能源局, adsorption isotherm

NB/T 10117-2018 Gravimetric method for isothermal adsorption determination of shale methane

Professional Standard - Energy, adsorption isotherm

NB/T 10888-2021 High-pressure isothermal adsorption test method for coal—gravimetric method

能源, adsorption isotherm

NB/T 10019-2015 Experimental method for multi-component gas isothermal adsorption of coal

Professional Standard - Petroleum, adsorption isotherm

SY/T 6132-2013 Determination of the methane isothermal adsorption quantity in coal.Capacity method of dry basis
SY 6132-2013 Determination of isothermal adsorption of methane in coal rocks by volumetric method on dry basis

Korean Agency for Technology and Standards (KATS), adsorption isotherm

KS D 0073-2002 Method of determining the PCT relations of hydrogen-absorbing alloys
KS D 4318-2006 Austempered spheroidal graphite iron castings
KS D 4318-2013 Austempered spheroidal graphite iron castings
KS P 1963-2018 Low temperature plasma sterilizer — Performance evaluation
KS M ISO 17499:2011 Carbonaceous materials used in the production of aluminium-Determination of baking level expressed by equivalent temperature
KS M ISO 17499:2016 Carbonaceous materials used in the production of aluminium－Determination of baking level expressed by equivalent temperature
KS W ISO 8279-2007(2018) Aerospace－Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications：600 MPa(at ambient temperature)/120 ℃,600 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient t

Professional Standard - Coal, adsorption isotherm

MT/T 1157-2011 Determination of Equilibrium Miosture in coal Isotherm Adsorption Method

ESDU - Engineering Sciences Data Unit, adsorption isotherm

SPD-M8-3-2008 Predicting adsorption isotherms using a two-dimensional Statistical Associating Fluid Theory.

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, adsorption isotherm

GB/T 35210.1-2017 Determination methods of methane isothermal adsorption in shale—Part 1: Capacity method
GB/T 35562-2017 Grades of surface air temperature assessment
GB/T 34967-2017 Grade of rice cold damage in northern China
GB/T 33291-2016 Measurement method of pressure-composition-temperature for reversable hydrogen asborption & desorption of hydrides

国家市场监督管理总局、中国国家标准化管理委员会, adsorption isotherm

GB/T 35210.2-2020 Determination methods of methane isothermal adsorption of shale—Part 2: Gravimetric method
GB/T 38964-2020 Isothermal forging for titanium-alloy—Technological specification
GB/T 38815-2020 Superalloy powders atomized by plasma rotating electrode process
GB/T 40408-2021 Nuclear grade isostatic graphite for high temperature gas-cooled reactor internals

中国轻工总会, adsorption isotherm

ZBW 04018.1-1989 Determination method of fiber content of linen and cotton blends: Adsorption isotherm method

American Society for Testing and Materials (ASTM), adsorption isotherm

ASTM D5919-96(2017) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
ASTM D5919-96(2022) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
ASTM D3860-98(2020) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
ASTM D5919-96 Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
ASTM D5919-96(2001) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
ASTM D5919-96(2006) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
ASTM D5919-96(2011) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
ASTM D4222-03 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts By Static Volumetric Measurements
ASTM D4222-98 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts By Static Volumetric Measurements
ASTM C1498-04a(2010)e1 Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
ASTM C1498-04 Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
ASTM C1498-04a(2023) Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
ASTM C1498-04a(2016) Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
ASTM D4222-03(2008) Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM E2509-14 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
ASTM D4222-20 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM D4222-03(2015)e1 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM E2509-08 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
ASTM E2509-21 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
ASTM D3860-98 Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
ASTM D3860-98(2003) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
ASTM D3860-98(2008) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
ASTM D3860-98(2014) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
ASTM A897/A897M-06 Standard Specification for Austempered Ductile Iron Castings
ASTM A897/A897M-02 Standard Specification for Austempered Ductile Iron Castings
ASTM A897/A897M-06(2011) Standard Specification for Austempered Ductile Iron Castings
ASTM A897/A897M-22 Standard Specification for Austempered Ductile Iron Castings
ASTM A897/A897M-16 Standard Specification for Austempered Ductile Iron Castings
ASTM A897/A897M-15 Standard Specification for Austempered Ductile Iron Castings
ASTM D4641-94(2006) Standard Practice for Calculation of Pore Size Distributions of Catalysts from Nitrogen Desorption Isotherms
ASTM D4641-94(1999)e1 Standard Practice for Calculation of Pore Size Distributions of Catalysts from Nitrogen Desorption Isotherms
ASTM D2879-83 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-86 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-18 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM A897-90(1997) Standard Specification for Austempered Ductile Iron Castings (Withdrawn)
ASTM A516/A516M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
ASTM A516/A516M-05 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
ASTM A234/A234M-03 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM A234/A234M-07 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM A234/A234M-10a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM A234/A234M-10b Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM D4641-17 Standard Practice for Calculation of Pore Size Distributions of Catalysts and Catalyst Carriers from Nitrogen Desorption Isotherms
ASTM UOP501-83 Hydrocarbon Types by Fluorescent Indicator Adsorption (FIA) at Elevated Temperatures

(U.S.) Ford Automotive Standards, adsorption isotherm

FORD HT2-7-1986 AUSTEMPERING
FORD M5J77-A-1983 PAINT, ALUMINUM, MEDIUM HEAT RESISTANT
FORD M1C157-A-1991 GREASE - HIGH TEMPERATURE WATER RESISTANT - NO.2 GRADE

CZ-CSN, adsorption isotherm

CSN 77 0940-1983 Determination of moisture sorption isoterms for projection of protective packaging

Gansu Provincial Standard of the People's Republic of China, adsorption isotherm

DB62/T 2415-2013 High temperature grade in Gansu Province
DB62/T 2630-2015 Potato heat damage grade
DB62/T 4110-2020 Main Meteorological Disaster Levels of Solar Greenhouses in Hexi Region

Professional Standard - Aerospace, adsorption isotherm

QJ 2676A-2014 Test method for adsorption properties of adsorbents at low temperature and pressure
QJ 2676-1994 Adsorbent low temperature and low pressure adsorption performance test method

Zhejiang Provincial Standard of the People's Republic of China, adsorption isotherm

DB33/T 2034-2017 High temperature heat damage grade of tea tree

Hubei Provincial Standard of the People's Republic of China, adsorption isotherm

DB42/T 820-2012 High temperature and heatstroke meteorological grade
DB42/T 2058-2023 Continuous low temperature rain and snow freezing process intensity level

农业农村部, adsorption isotherm

NY/T 3419-2019 Tea tree high temperature heat damage level

Professional Standard - Meteorology, adsorption isotherm

QX/T 671-2023 High temperature and heat stroke meteorological level
QX/T 228-2014 Classification of regional high temperature weather process
QX/T 98-2008 Grade of cold and rainy weather during the seeding-raising stage of early rice

廊坊市市场监督管理局, adsorption isotherm

DB1310/T 289-2022 Early warning level of low temperature chilling damage to tomatoes in solar greenhouses

Jiangsu Provincial Standard of the People's Republic of China, adsorption isotherm

DB32/T 4565-2023 Recombinase-mediated isothermal amplification method for nucleic acid detection of Schistosoma haematobium

Group Standards of the People's Republic of China, adsorption isotherm

T/CFA 020101243-2021 Austempered ductile iron (ADI) castings
T/SCLX 001-2021 Classification and assessment of hot spring homestay
T/CFA 020101242-2021 Austempered ductile iron grinding balls containing carbides
T/CCAS 017-2021 Test method for heat of hydration of cement （Isothermal conduction calorimetry）
T/SHPTA 051-2023 150℃temperature resistant thermoplastic polyester elastomer cable material
T/CASME 870-2023 Plasma melting system for hazardous waste

National Metrological Verification Regulations of the People's Republic of China, adsorption isotherm

JJG 128-2003 Standard Mercury-in-Glass Thermometers (Grade Ⅱ)
JJG 161-1994 Verification Regulation of Standard Mercury-in-Glass Thermometer(Grade I)

Society of Automotive Engineers (SAE), adsorption isotherm

SAE J2234-2001 Equivalent Temperature桾ruck and Bus
SAE AMS3193D-2011 Silicone Rubber Sponge, Closed Cell, Medium, Extreme Low Temperature
SAE AMS3193E-2014 Silicone Rubber Sponge Closed Cell, Medium, Extreme Low Temperature
SAE J2234-2007 Equivalent Temperature Truck and Bus
SAE J2234-2012 Equivalent Temperature Truck and Bus
SAE AMS3193C-1994 Silicone Rubber Sponge Closed Cell, Medium, Extreme Low Temperature
SAE AMS3193B-1985 SILICONE RUBBER SPONGE Closed Cell, Medium, Extreme Low Temperature
SAE AMS3193A-1977 SILICONE RUBBER SPONGE Closed Cell, Medium, Extreme Low Temperature
SAE AMS3193-1968 SILICONE RUBBER SPONGE Closed Cell, Medium, Extreme Low Temperature
SAE AMS3193C-2001 Silicone Rubber Sponge Closed Cell, Medium, Extreme Low Temperature
SAE AMS3193F-2019 Silicone Rubber Sponge Closed Cell, Medium, Extreme Low Temperature
SAE J2477-2003 Automotive Austempered Ductile (Nodular) Iron Castings (ADI)
SAE AMS3729-2011 EPOXY RESIN MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled

SAE - SAE International, adsorption isotherm

SAE J2234-1993 Equivalent Temperature@ Information Report (January 1993)
SAE J2477-2018 Automotive Austempered Ductile (Nodular) Iron Castings (ADI)

未注明发布机构, adsorption isotherm

SAE J2234-201211 Equivalent Temperature桾ruck and Bus

Japanese Industrial Standards Committee (JISC), adsorption isotherm

JIS G 5503:1995 Austempered spheroidal graphite iron castings
JIS G 3115:2000 Steel plates for pressure vessels for intermediate temperature service

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, adsorption isotherm

JEDEC JESD61A.01-2007 Isothermal Electromigration Test Procedure
JEDEC JESD61A-2007 Isothermal Electromigration Test Procedure
JEDEC JESD61-1997 Isothermal Electromigration Test Procedure

Professional Standard - Machinery, adsorption isotherm

JB/T 53290-1999 Cryogenic pump product quality classification
JB/T 53025-1999 Product quality classification of adsorption oxygen and nitrogen production equipment
JB/T 53151-1999 Cryogenic liquid tank car product quality classification
JB/T 12517.2-2015 Isothermal forging hydraulic press.Part 2: Testing of the accuracy
JB/T 53150-1999 Product quality classification of reciprocating cryogenic liquid pumps
JB/T 14414-2023 Internal combustion engines — Isothermal quenched bainite cylinder liners — Metallographic inspection

Professional Standard - Petrochemical Industry, adsorption isotherm

SH/T 0572-1993 Catalyst pore size distribution calculation method (nitrogen desorption isotherm calculation method)

工业和信息化部, adsorption isotherm

HG/T 5335-2018 Molecular sieve adsorption temperature rise determination method

YU-JUS, adsorption isotherm

JUS C.K6.035-1982 Prestressing steels. Isotermal relaxsation test

BE-NBN, adsorption isotherm

NBN I 10-202-1980
NBN S 35-002-1985 Refractory products - Determination of pyrometric cone equivalent (refractoriness)

Association Francaise de Normalisation, adsorption isotherm

NF A32-202/A1:2006 Founding - Austempered ductile cast irons.
NF A32-202:1997 Founding - Austempered ductile cast irons.
NF EN 50446:2006 Thermomètres à thermocouples droits avec tube de protection métallique ou en céramique, et accessoires
NF EN ISO 11357-6:2018 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 6 : détermination du temps d'induction à l'oxydation (OIT isotherme) et de la température d'induction à l'oxydation (OIT dynamique)

Heilongjiang Provincial Standard of the People's Republic of China, adsorption isotherm

DB23/T 2723-2020 Maize suitable sowing temperature grade

Xinjiang Provincial Standard of the People's Republic of China, adsorption isotherm

DB65/T 4324-2020 Level of warming process of snowmelt flood

国家旅游局, adsorption isotherm

LB/T 070-2017 Classification of spring quality for hot spring tourism

Jiangxi Provincial Standard of the People's Republic of China, adsorption isotherm

DB36/T 861-2023 Navel orange high temperature and low humidity disaster level
DB36/T 1758-2023 Evaluation grade of high temperature and heat damage of double-cropping early rice
DB36/T 861-2015 High temperature and low humidity meteorological disaster grade of Gannan navel orange

Hebei Provincial Standard of the People's Republic of China, adsorption isotherm

DB13/T 5175-2020 Greenhouse Vegetable Planting Low Temperature and Little Sunshine Weather Grade and Forecast

AGMA - American Gear Manufacturers Association, adsorption isotherm

939-A07-2007 Austempered Ductile Iron for Gears

Shaanxi Provincial Standard of the People's Republic of China, adsorption isotherm

DB61/T 1380-2020 Hot Spring Tourism Service Quality Standards Hot Spring Quality Classification

Inner Mongolia Provincial Standard of the People's Republic of China, adsorption isotherm

DB1501/T 0044-2023 Facility strawberry high-temperature heat damage, low-temperature freezing damage, and low-light disaster levels
DB15/T 3111-2023 Meteorological grade index of high temperature heat damage to corn
DB15/T 3109-2023 Meteorological grade index of high temperature and heat damage in sunflower

RU-GOST R, adsorption isotherm

GOST 14894-1969 Thermoelectric standard 2-class and general industry use thermometers for low temperatures. Methods and means of verification
GOST 30679-1999 Standard platinum resistance thermometers of the first and second grades. General technical requirements
GOST R ISO 17499-2016 Carbonaceous materials used in the production of aluminium. Determination of baking level expressed by equivalent temperature
GOST 19663-1990 Isothermal reservoirs for liquid carbon dioxide. General technical requirements

RO-ASRO, adsorption isotherm

STAS 11290-1989 RESISTANT STEELS AT LOW AND HIGH TEMPERATURES FOR ASSEMBLING PACTS Grades and technics.:! requirements for quality
STAS 11290/C1-1985 REZISTANT STEELS AT LOW AND HIGH TEMPERATURE FOR ASSEMBLING PARTS Grades and technical requirements for quality
STAS 8184-1987 STEELS FOR TUBES USED AT ELEVATED TEMPERATURES Grades and technical requirements for quality
STAS 10382-1988 STEELS FOR TUBES FOR LOW TEMPEBATURES SERVICE Grades and technical requirements for qualily
STAS 12403-1985 LOW TEMPERATt'RES RESISTANT STEELS IN CASTINGS Grades and technical requirements for quality
STAS 2888/6-1981 Standard gauge railway cars REFRIGERATOR, ISOTHERMAL AND COOLER WAGONS Types and main parameters

Professional Standard - Ferrous Metallurgy, adsorption isotherm

YB/T 130-1997 Steel.Determination of isothermal transformation diagram method

Hunan Provincial Standard of the People's Republic of China, adsorption isotherm

DB43/T 2212-2021 Assessment of Low Temperature Disaster Grade of Camellia oleifera Flowering Stage

Guizhou Provincial Standard of the People's Republic of China, adsorption isotherm

DB52/T 1662-2022 Classification and assessment of hot spring resorts

Henan Provincial Standard of the People's Republic of China, adsorption isotherm

DB41/T 2455-2023 Meteorological level of low temperature, rain, snow and freezing disasters
DB41/T 2094-2021 High temperature early warning meteorological grade of summer maize flowering period

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., adsorption isotherm

ASHRAE PH-97-1-2-1997 Comparison of Sorption Systems Based on Equivalent Carnot Cycles
ASHRAE 3867-1995 Equivalent Outdoor Temperature for District Heating Systems
ASHRAE 164.3-2015 Method of Test for Commercial and Industrial Isothermal Humidifiers
ASHRAE SA-96-1-1-1996 Airflow Characteristics of Jet Expansion for Nonisothermal Flow Conditions

SE-SIS, adsorption isotherm

SIS SMS 1235-1970 Fittings oj copper alloys for piping. Pressure and temperature ratings
SIS SMS 1233-1970 Fittings of stainless steel for piping. Pressure and temperature ratings

Professional Standard - Electron, adsorption isotherm

SJ/T 9560.25-1993 Sealed constant temperature relay--Quality grading standard
SJ/T 9560.26-1993 Unsealed constant temperature relay--Quality grading standard

Professional Standard - Commodity Inspection, adsorption isotherm

SN/T 3735-2013 Test method of classification for dangerous goods.Isothermal storage

GM North America, adsorption isotherm

GM GM6401M-2000 "Low Permeability Fuel Filler Hoses, Moderate Temperature"
GM GM224M-1997 Moderate-Temperature, Striation-Resistant Engine Coolant Hose

Canadian General Standards Board （CGSB), adsorption isotherm

CGSB 3.23-2012-CAN/CGSB AMD 1-2013 Carbur閍cteur d抋viation (grades JET A et JET A-1)

British Standards Institution (BSI), adsorption isotherm

BS 5756:2007+A2:2017 Visual strength grading of temperate hardwood-Specification
BS ISO 17499:2006 Carbonaceous materials used in the production of aluminium - Determination of baking level expressed by equivalent temperature
BS EN ISO 21911-1:2023 Solid recovered fuels. Determination of self-heating - Isothermal calorimetry
BS EN 196-11:2018 Methods of testing cement - Heat of hydration. Isothermal Conduction Calorimetry method
BS EN 4131:2009 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1250 MPa (at ambient temperature) / 425 °C

机械工业部, adsorption isotherm

JB/T 5978-1992 Malleable cast iron pipe flange pressure--temperature grade

CN-DB 6, adsorption isotherm

DB6527/T 007-2023 Early warning level of high temperature heat damage in wolfberry summer fruit period

BR-ABNT, adsorption isotherm

ABNT NB-335-04.3-1979

ZA-SANS, adsorption isotherm

SANS 6300:2006 Lime tests - Isothermal slaking and preparation of quicklime

American National Standards Institute （ANSI), adsorption isotherm

ANSI/AHRI 470-2006 Performance Rating of Desuperheater/Water Heaters
ANSI/AHRI 750-2007 Performance Rating of Thermostatic Refrigerant Expansion Valves

中国气象局, adsorption isotherm

QX/T 548-2020 Solar cell power generation efficiency temperature impact level

International Organization for Standardization (ISO), adsorption isotherm

ISO 17499:2006 Carbonaceous materials used in the production of aluminium - Determination of baking level expressed by equivalent temperature
ISO 17499:2023 Carbonaceous materials used in the production of aluminium — Determination of baking level expressed by equivalent temperature
ISO 9157:2002 Aerospace - Nuts, spline-drive, self-locking, with MJ threads, classifications: 1100 MPa (at ambient temperature)/425°C, 1100 MPa (at ambient temperature)/650°C, 1210 MPa (at ambient temperature)/425°C, 1210 MPa (at ambient temperature)/730°C, 1550 MPa (a

NL-NEN, adsorption isotherm

NEN 3945-1982 Bitumen and tar products Determination of the Equi-Viscous Temperature (EVT)

PL-PKN, adsorption isotherm

PN P22126-1991 Leathers. Determination of water vapour permeability in non-isothermal conditions

Professional Standard - Tourism, adsorption isotherm

LB/T 016-2011 Classification & accreditation for service-rated hot spring enterprise

Professional Standard - Chemical Industry, adsorption isotherm

HG 20625-1997 Steel Pipe Flange Pressure Temperature Ratings (American System)
HG 20625-1997（编制说明） Steel Pipe Flange Pressure Temperature Ratings (American System)
HG 20604-1997 Steel pipe flange pressure temperature rating (European system)
HG 20604-1997（编制说明） Steel pipe flange pressure temperature rating (European system)

AR-IRAM, adsorption isotherm

IRAM 12 507-1958

Aerospace Industries Association/ANSI Aerospace Standards, adsorption isotherm

AIA/NAS NAS 1688-1964 Hose Assembly, Tetrafluoroethylene High Temperature, Medium Pressure, Flared
AIA/NAS NAS 1689-1964 Hose Assembly, Tetrafluoroethylene High Temperature, Medium Pressure, Flareless

Liaoning Provincial Standard of the People's Republic of China, adsorption isotherm

DB21/T 3256-2020 Rapid detection method for isothermal amplification of African swine fever virus
DB21/T 2475-2015 Facility Agriculture (Greenhouse) Wind and Snow Meteorological Disaster Warning Level

Shanxi Provincial Standard of the People's Republic of China, adsorption isotherm

DB14/T 1709-2018 Classification of Chilling Injury Levels of Facility Tomatoes, Cucumbers and Peppers

Shandong Provincial Standard of the People's Republic of China, adsorption isotherm

DB37/T 1826-2011 Porcine circovirus type 2 loop-mediated isothermal amplification technique
DB37/T 3112-2018 Porcine pseudorabies virus loop-mediated isothermal amplification detection technology

国家质量监督检验检疫总局, adsorption isotherm

SN/T 4704-2016 Isothermal detection of kinetic parameters Differential scanning calorimetry

Beijing Provincial Standard of the People's Republic of China, adsorption isotherm

DB11/T 2144-2023

JP-JCS, adsorption isotherm

JCS 1363-2009 High strength grade thermo resistant aluminium alloy conductors ,steel reinforced