ZH
RU
ES

Standard Curve and Calibration Curve

Standard Curve and Calibration Curve, Total:237 items.

In the international standard classification, Standard Curve and Calibration Curve involves: Quality, Vocabularies, Electricity. Magnetism. Electrical and magnetic measurements, Noise with respect to human beings, Machine tools, Sports equipment and facilities, Road engineering, Testing of metals, Products of the textile industry, Earth-moving machinery, Construction industry, Electrical accessories, Medical equipment, Electromagnetic compatibility (EMC), Metrology and measurement in general, Waxes, bituminous materials and other petroleum products, Non-ferrous metals, Aerospace electric equipment and systems, Radiation measurements, Raw materials for rubber and plastics, Springs, Solar energy engineering, Acoustics and acoustic measurements, Iron and steel products, Analytical chemistry, Construction materials, Paints and varnishes, Edible oils and fats. Oilseeds, Linear and angular measurements, Optics and optical measurements, Photography, Environmental testing, Fruits. Vegetables, Petroleum products in general, Road vehicles in general, Refractories, Non-destructive testing, Optical equipment, Insulating materials, Measurement of volume, mass, density, viscosity, Sterilization and disinfection, Applications of information technology, Air quality, Wood, sawlogs and sawn timber, Fibre optic communications, Hydraulic fluids, Rubber and plastics products, Paint coating processes, Diagnostic, maintenance and test equipment, Magnetic materials.

Group Standards of the People's Republic of China, Standard Curve and Calibration Curve

T/SXCAA 012-2021 Guidelines for Quality Control of Linear Calibration Curves
T/SHZSAQS 00084-2022 Formaldehyde standard curve preparation technical regulations
T/CECS 1068-2022 Reliability Appraisal Standards for Hyperbolic Cooling Towers

Institute of Electrical and Electronics Engineers (IEEE), Standard Curve and Calibration Curve

IEEE 1459-2000 Trial-use standard definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions
IEEE 1459-2010 Definitions for the Measurement of Electric Power Quantities Under Sinusoidal, Nonsinusoidal, Balanced, or Unbalanced Conditions
IEEE Std 1138-2009/Cor 1-2014 (Corrigendum to IEEE Std 1138-2009) IEEE Standard for Testing and Performance for Optical Ground Wire (OPGW) Use on Electric Utility Power Lines -- Corrigendum 1: Stress-Strain Temperature Correction, Aeolian Vibration Velocity
IEEE/ANSI N42.28-2002 American National Standard Calibration of Germanium Detectors for In-Situ Gamma-Ray Measurements
IEEE P1138-2009/Cor1/D1, March 2014 IEEE Standard for Testing and Performance for Optical Ground Wire (OPGW) Use on Electric Utility Power Lines -- Corrigendum 1: Stress-Strain Temperature Correction, Aeolian Vibration Velocity

Association Francaise de Normalisation, Standard Curve and Calibration Curve

NF S30-003*NF ISO 226:2004 Acoustics - Normal equal-loudness-level contours
NF ISO 11843-5/A1:2017 Capacité de détection - Partie 5 : méthodologie des étalonnages linéaire et non linéaire - Amendement 1
NF X21-007:2008 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steel using a calibration curve method.
NF X06-048-5/A1*NF ISO 11843-5/A1:2017 Capability of detection - Part 5 : methodology in the linear and non-linear calibration cases - Amendment 1
NF EN IEC 60263:2020 Échelles et dimensions des graphiques pour le tracé des courbes de réponse en fréquence et des diagrammes polaires
NF EN 60068-2-57:2013 Essais d'environnement - Partie 2-57 : essais - Essai Ff : vibrations - Méthode par accélérogrammes et sinusoïdes modulées

International Organization for Standardization (ISO), Standard Curve and Calibration Curve

ISO 226:1987 Acoustics; Normal equal-loudness level contours
ISO 226:2023 Acoustics — Normal equal-loudness-level contours
ISO 226:2003 Acoustics - Normal equal-loudness-level contours
ISO 10647:1996 Procedures for calibrating and determining the response of neutron-measuring devices used for radiation protection purposes
ISO 16592:2006 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method
ISO 16592:2012 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method
ISO 10519:2015/DAmd 1:2023 Rapeseed — Determination of chlorophyll content — Spectrometric method — Amendment 1: Preparation of the calibration curve to determine the k factor
ISO/TR 10305-2:2003 Road vehicles - Calibration of electromagnetic field strength measuring devices - Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz

British Standards Institution (BSI), Standard Curve and Calibration Curve

BS ISO 226:2003 Acoustics - Normal equal-loudness-level contours
BS EN 3373-014:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200 °C - Product standard
BS EN IEC 61853-4:2018 Photovoltaic (PV) module performance testing and energy rating - Standard reference climatic profiles
BS ISO 16592:2012 Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method
BS 2011 Pt.2.2Z/AFc & Z/BFc:1986 Environmental testing. Guidance. Tests Z/AFc and Z/BFc. Guidance on combined temperature (cold and dry heat) and vibration (sinusoidal) tests
BS EN 3373-008:2012 Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 °C. Product standard

RU-GOST R, Standard Curve and Calibration Curve

GOST 9735-1987 Profile grinders. Standards of accuracy

YU-JUS, Standard Curve and Calibration Curve

JUS U.M1.042-1987 Determination of ultrasonic pulse velocity and calibration curve
JUS U.J1.070-1986 Fire protection. Standard time-temperature curve in fire resistance test furnaces for constructions

American Society for Testing and Materials (ASTM), Standard Curve and Calibration Curve

ASTM F1832-97 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM F1832-07(2017) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D2493/D2493M-09 Standard Viscosity-Temperature Chart for Asphalts
ASTM E561-21 Standard Test Method for KR Curve Determination
ASTM E561-20 Standard Test Method for KR Curve Determination
ASTM E561-19 Standard Test Method for KR Curve Determination
ASTM E561-19e1 Standard Test Method for KR Curve Determination
ASTM E561-22 Standard Test Method for KR Curve Determination
ASTM E561-08e1 Standard Test Method forK-R Curve Determination
ASTM E561-10e1 Standard Test Method for K-R Curve Determination
ASTM E561-98 Standard Practice for R-Curve Determination
ASTM E561-15 Standard Test Method for KR Curve Determination
ASTM E561-08 Standard Test Method forK-R Curve Determination
ASTM E561-05 Standard Test Method for K-R Curve Determination
ASTM E561-05e1 Standard Test Method forK-R Curve Determination
ASTM E561-15a Standard Test Method for KR Curve Determination
ASTM E561-10e2 Standard Test Method for K-R Curve Determination
ASTM D1336-07(2011) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM F3141-23 Standard Guide for Total Knee Replacement Loading Profiles
ASTM B478-85(1997)e1 Standard Test Method for Cross Curvature of Thermostat Metals
ASTM D87-07 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D87-07a Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM E2218-23 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-15 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-02(2008) Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14e1 Standard Test Method for Determining Forming Limit Curves
ASTM E561-10 Standard Test Method forK-R Curve Determination
ASTM D87-09(2014) Standard Test Method for Melting Point of Petroleum Wax 40;Cooling Curve41;
ASTM D87-09 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D1336-07(2015) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM E2218-02 Standard Test Method for Determining Forming Limit Curves
ASTM D1336-97(2003) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D1336-97 Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D6068-96(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM F1832-07 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D3883-04 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM E1541-98 Standard Practice for Specifying and Matching Color Using the Colorcurve System
ASTM F1832-07(2011) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM E561-23 Standard Test Method for KR Curve Determination
ASTM D6068-10(2018) Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM B389-81(1998) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
ASTM B389-81(2020) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
ASTM D6068-96 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM E2948-14 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM E1361-90(1999) Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM E1361-02(2021) Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM D3883-99 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM D3883-04(2008) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM D3883-04(2012) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM C1656-07 Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile
ASTM E305-07 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
ASTM E305-13 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
ASTM E1622-94(1999)e1 Standard Practice for Correction of Spectral Line Overlap in Wavelength-Dispersive X-Ray Spectrometry (Withdrawn 2006)
ASTM C1656-13 Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile
ASTM C1699-09(2015) Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM F2508-15 Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
ASTM F2508-16e1 Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
ASTM F2508-12 Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
ASTM E305-21 Standard Practice for Establishing and Controlling Spark Atomic Emission Spectrochemical Analytical Curves
ASTM F2771-10(2016) Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM E746-02 Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM E746-93(1998) Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM D6200-01(2007) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-00 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM E1082-90(2002) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM E1082-90(2007) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM C16-03(2008) Standard Test Method for Load Testing Refractory Shapes at High Temperatures
ASTM E1082-90(2012) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM C1656-13(2018) Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables Using Exothermic Profile
ASTM D6200-21 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01(2017) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM C1699-09(2023) Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM C1699-08 Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM D6200-01(2012) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM C1656-13(2023) Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables Using Exothermic Profile
ASTM E2861-11 Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams
ASTM E1951-02(2007) Standard Guide for Calibrating Reticles and Light Microscope Magnifications
ASTM E1951-14 Standard Guide for Calibrating Reticles and Light Microscope Magnifications
ASTM B913-00e1 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
ASTM B913-00 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
ASTM E1361-02 Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM E1361-02(2007) Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM E1361-02(2014)e1 Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM E746-07 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
ASTM D4882-97 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM F2771-10 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM D4882-17 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM E1891-21 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM F2771-09 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM E2955-13 Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces
ASTM D6177-19 Standard Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets
ASTM D6782-05 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM D6782-04 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM D6782-19 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM G75-07 Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
ASTM D6549-06(2021) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D1830-17 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM E1891-10a Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM D6549-01 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6549-00 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM E1891-97(2002) Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM E1891-97 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM E1891-10 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM E1951-98 Standard Guide for Calibrating Reticles and Light Microscope Magnifications
ASTM E1951-02 Standard Guide for Calibrating Reticles and Light Microscope Magnifications
ASTM E1951-01 Standard Guide for Calibrating Reticles and Light Microscope Magnifications
ASTM E1951-14(2019) Standard Guide for Calibrating Reticles and Light Microscope Magnifications
ASTM D6782-13 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM A977/A977M-07 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM D6549-06 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D1830-99(2012) Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM A977/A977M-07(2013) Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM D6549-06(2015) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM G75-01 Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
ASTM G75-95 Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
ASTM A773/A773M-01(2009) Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
ASTM A977-97 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM D6549-06(2011) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D7646-10(2014) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis

AASHTO - American Association of State Highway and Transportation Officials, Standard Curve and Calibration Curve

T 272-2010 Standard Method of Test for Family of Curves—One Point Method
T 272-2015 Standard Method of Test for Family of Curves-One Point Method
T 272-2004 Standard Method of Test for Family of Curves - One-Point Method
PP 62-2009 Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA)
T 272-1986 Standard Method of Test for Family of Curves - One-Point Method (HM-22; PART IIB)
R 62-2013 Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures
PP 62-2010 Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA) (Revision 1)
T272-1986 Standard Method of Test for Family of Curves - One-Point Method (Nineteenth Edition; Revised Per Interim Specifications - Tests and Methods - 1999)
TP 107-2018 Standard Method of Test for Determining the Damage Characteristic Curve and Failure Criterion Using the Asphalt Mixture Performance Tester (AMPT) Cyclic Fatigue Test

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Standard Curve and Calibration Curve

GB/T 36063-2018 Nanotechnologies—Raman shift standard curve for spectrometer calibration
GB/T 4963-2007 Acoustics.Normal equal-loudness-level contours
GB/T 15247-2008 Microbeam analysis.Electron probe microanalysis.Guidelines for determining the carbon content of steels using calibration curve method

Korean Agency for Technology and Standards (KATS), Standard Curve and Calibration Curve

KS I ISO 226:2003 Acoustics-Normal equal-loudness level contours
KS I ISO 226:2014 Acoustics — Normal equal-loudness level contours
KS D ISO 16592:2011 Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
KS D ISO 16592-2011(2016) Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
KS D ISO 16592-2011(2021) Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method

SE-SIS, Standard Curve and Calibration Curve

SIS SMS 2027-1975 Dust separating. Standard curves for dust
Nr 39-1992

German Institute for Standardization, Standard Curve and Calibration Curve

DIN ISO 226:2006 Acoustics - Normal equal-loudness-level contours (ISO 226:2003);English version of DIN ISO 226:2006-04
DIN 55912-2 Bb.2:1999 Pigments - Titanium dioxide pigments - Methods of analysis; establishing a calibration graph using the X-ray fluorescence analysis
DIN 48051-1:1959-09 Power current overhead lines; bent insulator spindles, standard design
DIN IEC 60263:1999 Sclaes and sizes for plotting frequency characteristics and polar diagrams (IEC 60263:1982)
DIN ISO 16592:2015 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method (ISO 16592:2012)
DIN 53019-3:2008 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 3: Errors of measurement and corrections
DIN 53019-3:2008-09 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 3: Errors of measurement and corrections
DIN 53019-2:2001 Viscosimetry - Measurement of viscosities and flow curves by means of rotation viscosimeters - Part 2: Viscosimeter calibration and determination of the uncertainty of measurement
DIN 53019-1:1980 Viscometry; Determination of viscosities and flow curves using standard design rotary viscometers with a standard geometry measuring system
DIN 53019-2:2001-02 Viscosimetry - Measurement of viscosities and flow curves by means of rotation viscosimeters - Part 2: Viscosimeter calibration and determination of the uncertainty of measurement
DIN 53014-2:1994 Viscometry; capillary viscometers with circular and rectangular cross section for determination of flow curves; systematic deviations, sources and corrections

IT-UNI, Standard Curve and Calibration Curve

UNI S 195-1943

The American Road & Transportation Builders Association, Standard Curve and Calibration Curve

AASHTO T 272-2010 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-2015 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-1986 Standard Method of Test for Family of Curves - One-Point Method HM-22; PART IIB R(2000)
AASHTO R 62-2013 Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures
AASHTO PP 62-2010 Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA) Revision 1

Society of Automotive Engineers (SAE), Standard Curve and Calibration Curve

SAE J739-1991 Cutting Edge - Curved Grader, Standard June 1991
SAE ARP958D-1999 Electromagnetic Interference Measurement Antennas; Standard Calibration Method
SAE ARP958-1968 BROADBAND ELECTROMAGNETIC INTERFERENCE MEASUREMENT ANTENNAS; STANDARD CALIBRATION REQUIREMENTS AND METHODS

AGMA - American Gear Manufacturers Association, Standard Curve and Calibration Curve

218.01-1982 Standard for Rating the Pitting Resistance and Bending Strength of Spur and Helical Involute Gear Teeth
P84FTM4-1984 Computer Aided Corrective Machine Settings for Manufacturing Bevel and Hypoid Gear Sets

American National Standards Institute （ANSI), Standard Curve and Calibration Curve

ANSI/IEEE C37.112:1996 Standard Inverse-Time Characteristic for Overcurrent Relays
ANSI N42.25-1997 Calibration and Usage of Alpha/Beta Proportional Counters
ANSI/IEEE 1309:2005 Standard for Calibration of Electromagnetic Field Sensors and Probes, Excluding Antennas, from 9 kHz to 40 GHz
BS ISO 13050:2022 Tracked Changes. Synchronous belt drives. Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys (British Standard)

Japanese Industrial Standards Committee (JISC), Standard Curve and Calibration Curve

JIS Z 8461:2001 Linear calibration using reference materials
JIS C 61300-2-1:2012 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-1: Tests -- Vibration (sinusoidal)

PK-PSQCA, Standard Curve and Calibration Curve

PS 122-1985 PAKISTAN STANDARD METHOD FOR THE DETERMINATION OF CRIMP OF YARN IN FABRIC

RO-ASRO, Standard Curve and Calibration Curve

STAS 6901-1978 Psycho-physiological acou stics STANDARD CURVES OF EQUAL LOUDNESS LEVEL AND RELATIONS BETWEEN SOUND PRESSURE LEVELS

BR-ABNT, Standard Curve and Calibration Curve

ABNT PB-528-1979

ESDU - Engineering Sciences Data Unit, Standard Curve and Calibration Curve

AERO W.01.01.05 E-2007 Slope of lift curve for two-dimensional flow. (Incorporates Amendments A@ B@ C@ D@ and E)
ESDU 76014 B-1993 Estimation of endurance and construction of constant amplitude SN curves from related data corrected for notch and mean stress effects.
ESDU 76014 B-2013 Estimation of endurance and construction of constant amplitude S – N curves from related data corrected for notch and mean stress effects
ESDU 88033-1988 The design of spur and helical involute gears. A procedure compatible with BS 436:1986 - method for calculation of contact and root bending stress limitations for metallic involute gears.

National Association of Corrosion Engineers (NACE), Standard Curve and Calibration Curve

NACE RP0197-1997 Standard Format for Computerized Electrochemical Polarization Curve Data Files
NACE RP0197-2004 Standard Format for Computerized Electrochemical Polarization Curve Data Files Item No. 21080

TR-TSE, Standard Curve and Calibration Curve

TS 2090-1975 BASIC ENVIRONMENTAL TESTING PROCEDURES FOR ALECTRONIC COMPONENTS AND ELECTRONIC EQUIPMENT TEST Fc:VIBRATION (SINUSOIDAL)

VE-FONDONORMA, Standard Curve and Calibration Curve

European Association of Aerospace Industries, Standard Curve and Calibration Curve

AECMA PREN 3373-010-2006 Aerospace series Terminal lugs and in-line splices for crimping on electric conductors Part 010: Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 癈 for metric and inch stud series Product standard Edition
AECMA PREN 3373-011-2006 Aerospace series Terminal lugs and in-line splices for crimping on electric conductors Part 011: Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 癈 for metric and inch stud series Product standard Editi
AECMA PREN 3373-012-2003 Aerospace Series Terminal Lugs and In-line Splices for Crimping on Electric Conductors Part 012: In-line Splices, Insulated and Sealed, for Crimping on Copper Conductors, Temperature up to 150 Degrees C Product Standard Edition P 1
AECMA PREN 3373-013-2003 Aerospace Series Terminal Lugs and in-line Splices for Crimping on Electric Conductors Part 013: In-line Splices, Insulated and Moisture Resistant, for Crimping on Copper Conductors, temperature up to 260 degrees C Product Standard Edition P 1

American Society of Mechanical Engineers (ASME), Standard Curve and Calibration Curve

ASME STP-PT-094-2022 Determination of Stress Strain Curves of 304, 304L, 316, 316L for Strain-Based Design Criteria

PL-PKN, Standard Curve and Calibration Curve

PN E88606-1989 Electrical relays Vibration, shock, bump and seismic tests on measuring relays and protection equipment Yibration tests (sinusoidal)
PN T80317-1964 Microwove equipment. Aerials Gain standards. Calcula?ion and colibration

(U.S.) Telecommunications Industries Association , Standard Curve and Calibration Curve

TIA SP3696-2000 Accelerated Measurement of BER and Q-Factor in Digital Optical Transmission Systems Using the Sinusoidal Interference Method Comment Period Expires: July 26, 2000; TIA/EIA-526-8

International Electrotechnical Commission (IEC), Standard Curve and Calibration Curve

IEC 61300-2-1:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal)

AENOR, Standard Curve and Calibration Curve

UNE-EN 60512-6-4:2002 Connectors for electronic equipment - Tests and measurements -- Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal).

Taiwan Provincial Standard of the People's Republic of China, Standard Curve and Calibration Curve

CNS 14306-4-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
CNS 14306.4-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
CNS 14306.3-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
CNS 14306-3-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface

Canadian Standards Association (CSA), Standard Curve and Calibration Curve

CSA T568.1-1-2005 Commercial building telecommunications cabling standard — Part 1: General requirements — Addendum 1 — Minimum 4-pair UTP and 4-pair ScTP patch cable bend radius (First Edition)

AT-OVE/ON, Standard Curve and Calibration Curve

OVE EN 50632-2-11/A1-2021 Electric motor-operated tools - Dust measurement procedure - Part 2-11: Particular requirements for jig and sabre saws (Amendment) (english version)

Aerospace, Security and Defence Industries Association of Europe (ASD), Standard Curve and Calibration Curve

ASD-STAN PREN 2349-413-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 413: Vibration, Sinusoidal and Random (Edition P 1)
ASD-STAN PREN 2591-403-2010 Aerospace series Elements of electrical and optical connection Test methods Part 403: Sinusoidal and random vibration (Edition P 2)

National Metrological Verification Regulations of the People's Republic of China, Standard Curve and Calibration Curve

JJG 493-1987 Verification Rigulation for Audio Magnetic Properties of Standard Specimen of Soft Magnetic Materials (A-C Magnetization Curve and Amplitude Permeability)

CENELEC - European Committee for Electrotechnical Standardization, Standard Curve and Calibration Curve

EN 60068-2-50:1999 Environmental Testing Part 2: Tests - Tests Z/AFc: Combined Cold/Vibration (Sinusoidal) Tests for Both Heat-Dissipating and Non-Heat-Dissipating Specimens
EN 60068-2-51:1999 Environmental Testing Part 2: Tests - Tests Z/BFc: Combined Dry Heat/Vibration (Sinusoidal) Tests for Both Heat-Dissipating and Non-Heat Dissipating Specimens

CU-NC, Standard Curve and Calibration Curve

NC 90-03-14-1988 Standards System for Metrological Assurance. Radiogonometers. Methods and Means of Calibration