ZH
RU
ES
What are thermoplastics
What are thermoplastics, Total:96 items.
In the international standard classification, What are thermoplastics involves: Plastics, Rubber, Packaging materials and accessories, Aerospace electric equipment and systems, Pipeline components and pipelines, Welding, brazing and soldering, Raw materials for rubber and plastics, Equipment for petroleum and natural gas industries, Insulating materials, Non-textile floor coverings, External sewage systems.
CH-SNV, What are thermoplastics
RO-ASRO, What are thermoplastics
Association Francaise de Normalisation, What are thermoplastics
- NF EN ISO 3994:2014 Tuyaux en plastiques - Tuyaux thermoplastiques à renforcement thermoplastique en spirale pour aspiration et refoulement de matières aqueuses - Spécifications
- NF T46-031:2006 Rubber, vulcanized or thermoplastic - Method of test for staining in contact with organic material.
- NF T57-224:1997 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals.
- NF EN ISO 13846:2002 Systèmes de canalisations en plastiques - Assemblages et jonctions avec et sans effet de fond pour canalisations thermoplastiques avec pression - Méthode d'essai pour vérifier l'étanchéité à long terme sous une pression d'eau interne
- NF M87-232-1*NF EN ISO 23936-1:2010 Petroleum, petrochimical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1 : thermoplastics
- NF ISO 3865:2020 Caoutchouc vulcanisé ou thermoplastique - Méthodes d'essai pour déterminer le tachage lors du contact avec des matières organiques
- NF T51-082:1999 Plastics. Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds. Discoloration method.
- NF B54-020/IN1*NF EN 13329/IN1:2017 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
- NF EN 60454-3-6:1998 Rubans adhésifs sensibles à la pression à usages é - Partie 3 : spécifications pour matériaux particuliers - Feuille 6 : rubans en polycarbonate avec un adhésif en acrylique thermoplastique.
- NF EN 15632-2:2022 Tuyaux de chauffage urbain - Systèmes de tuyaux flexibles manufacturés - Partie 2 : système bloqué avec tubes de service en plastique ; exigences et méthodes d'essai
International Organization for Standardization (ISO), What are thermoplastics
- ISO 2557-1:1989 Plastics — Amorphous thermoplastics — Preparation of test specimens with a specified maximum reversion — Part 1: Bars
- ISO 3865:2020 Rubber, vulcanized or thermoplastic — Methods of test for staining in contact with organic material
- ISO 2557-2:1979 Plastics — Amorphous thermoplastic moulding materials — Preparation of test specimens with a defined level of shrinkage — Part 2: Test specimens in the form of rectangular plates (Injection moulding)
- ISO 2557-1:1976 Plastics — Amorphous thermoplastic moulding materials — Preparation of test specimens with a defined level of shrinkage — Part 1: Test specimens in the form of parallelepipedic bars (Injection mouldin
- ISO 3865:2005 Rubber, vulcanized or thermoplastic - Methods of test for staining in contact with organic material
- ISO 15038:1999 Plastics - Organic-perester crosslinking agents for unsaturated-polyester thermosetting materials - Determination of active-oxygen content
- ISO 8572:1991 Pipes and fittings made of glass-reinforced thermosetting plastics (GRP); definitions of terms relating to pressure, including relationships between them, and terms for installation and jointing
- ISO 305:1990 Plastics; determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds; discoloration method
- ISO 23228:2011 Thermoplastics pipes for the conveyance of fluids - Determination of the stress-rupture resistance of moulding materials using plain strain grooved tensile (PSGT) specimens
German Institute for Standardization, What are thermoplastics
- DIN 53497:2017 Testing of plastics - Hot storage test on mouldings made of thermoplastic moulding materials without external mechanical stressing
- DIN 53497:1969 Testing of Plastics; Hot Storage Test on Mouldings Made of Thermoplastic Moulding Materials without External Mechanical Stressing
- DIN 16961-1:2018-08 Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 1: Classification and dimensions
- DIN 65672:2009-07 Aerospace - Continuous filament fibre reinforced laminates with non-reactive thermoplastics - Preparation of test panels; Text in German and English
- DIN 16961-2:2018-08 Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 2: Technical delivery specifications
- DIN EN ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009); English version EN ISO 23936-1:2009
- DIN EN ISO 305:1999 Plastics - Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method (ISO 305:1990); German version EN ISO 305:1999
- DIN EN 13329:2021-11 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods; German version EN 13329:2016+A2:2021 / Note: To be replaced by DIN EN 13329 (2023-03) (in preparation).
GM Europe, What are thermoplastics
- GME QK 001245-1983 ABS-Formmasse, schlagz鋒e und hochw鋜meformbest鋘dige Qualit鋞 ABS-Moulding Compound, Impact Resistant Quality of High Dimensional Stability under Heat German
- GME STD 518920-2001 Thermoplastic elastomer 8920 TPU-ARET Termoelast 8920 TPU-ARET English/Swedish
- GME QK 000266-2005 ABS-Moulding Compound, Impact Resistant Quality with High Dimensional Stability under Heat (English/German)
- GME 08100-2011 Thermoplastic Fuel Tubings with Multi Layer Structure (Revision 9; English/German; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by GMW14638)
American Society for Testing and Materials (ASTM), What are thermoplastics
- ASTM D2684-10 Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products
- ASTM F2019-00 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
SAE - SAE International, What are thermoplastics
- SAE AMS3674D-1996 Plastic Moldings@ Electrical Insulation Cross-Linked Polyolefin@ Pigmented@ Flexible@ Heat Shrinkable
- SAE AMS3674C-1992 Plastic Moldings@ Electrical Insulation Cross-Linked Polyolefin@ Pigmented@ Flexible@ Heat Shrinkable
- SAE AMS3674C-1987 Plastic Moldings@ Electrical Insulation Cross-Linked Polyolefin@ Pigmented@ Flexible@ Heat Shrinkable
- SAE AMS3638E-1988 PLASTIC TUBING@ ELECTRICAL INSULATION Irradiated Polyolefin@ Pigmented@ Semi-Rigid@ Heat-Shrinkable 2 to 1 Shrink Ratio
GM North America, What are thermoplastics
- GM GMN6753-2001 Tensile Properties of Injection Molded Short Glass - Fiber Reinforced Thermoplastics for Use in Finite Element Analysis of Long Flow Length Parts
British Standards Institution (BSI), What are thermoplastics
- BS 2782-9 Method 940B:1989 Methods of testing plastics. Sampling and test specimen preparation. Preparation of test specimens of amorphous thermoplastics with a specified reversion by injection moulding rectangular plates
- BS EN 1796:2013 Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
- BS ISO 3865:2005 Rubber, vulcanized or thermoplastic - Methods of test for staining in contact with organic material
- BS ISO 3865:2020 Tracked Changes. Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material
- BS EN 60454-3-2:2006 Pressure-sensitive adhesive tapes for electrical purposes - Specifications for individual materials - Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives
- BS ISO 15038:1999 Plastics - Organic-perester crosslinking agents for unsaturated-polyester thermosetting materials - Determination of active-oxygen content
- 19/30388629 DC BS ISO 3865. Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material
- BS EN 1989:2000 Thermoplastics piping systems. Joints for buried non-pressure sewerage applications. Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure
- BS 7655-6.1:1997 Specification for insulating and sheathing materials for cables - Thermoplastic sheathing compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke when affected by fire - General application thermoplast
- BS EN 50363-8+A1:2006 Insulating, sheathing and covering materials for low voltage energy cables. Halogen-free, thermoplastic sheathing compounds
- BS EN 50363-8:2005+A1:2011 Insulating, sheathing and covering materials for low voltage energy cables. Halogen-free, thermoplastic sheathing compounds
- BS ISO 25780:2011 Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin. Pipes with flexible joints intended to be installed usin
- BS EN 1119:2009 Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements
- BS EN 13329:2006+A1:2008 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
- BS EN 13329:2016+A2:2021 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
- 20/30424901 DC BS EN 15632-2. District heating pipes. Factory made flexible pipe systems. Part 2. Bonded system with plastic service pipes; requirements and test methods
- 20/30424898 DC BS EN 15632-3. District heating pipes. Factory made flexible pipe systems. Part 3. Non bonded system with plastic service pipes; requirements and test methods
- 20/30415609 DC BS EN 13329 AMD2. Laminate floor coverings. Elements with a surface layer based on aminoplastic thermosetting resins. Specifications, requirements and test methods
Society of Automotive Engineers (SAE), What are thermoplastics
- SAE AMS3634E-2012 Tubing, Plastic, Electrical Insulation, Polyolefin, Selectively Crosslinked, Semi-Rigid, Heat Shrinkable
IN-BIS, What are thermoplastics
Association of German Mechanical Engineers, What are thermoplastics
- DVS 2216-1 Beiblatt 1-2005 DVS test specimens with an energy director for the ultrasonic welding of thermoplastics and testing conditions
GM Global, What are thermoplastics
- GMW 16652-2012 Standard Test Methods for Quasi-static Physical Testing of Injection Molded Glass Fiber Reinforced Thermoplastics for use in Finite Element Analysis Issue 1; English
(U.S.) Ford Automotive Standards, What are thermoplastics
- FORD WSF-M4D846-A-2006 POLYAMIDE 46 (PA46), HEAT STABILIZED, 40 % GLASS FIBER REINFORCED MOLDING
- FORD WSS-M4D1005-A2-2011 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), HIGH MELT FLOW, 22% MINERAL FILLED, FULLY PAINTED ONLY, MOLDING COMPOUND, FASCIA / THIN-WALLED EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M4D1005-A1
- FORD WSK-M4D811-A-2006 POLYAMIDE (PA) 46, HEAT STABILIZED, OIL IMPREGNATED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D823-A-2006 POLYAMIDE 66 (PA66), HEAT STABILIZED 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
European Committee for Standardization (CEN), What are thermoplastics
- EN 1796:2013 Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
- EN ISO 23936-1:2022 Oil and gas industries including lower carbon energy - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2022)
- EN ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009)
- EN 1796:2006 Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) Incorporates Amendment A1: 2008
- EN 14364:2013 Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes@ fittings and joints
- EN ISO 305:1999 Plastics - Determination of Thermal Stability of Poly (Vinyl Chloride), Related Chlorine-Containing Homopolymers and Copolymers and Their Compounds - Discoloration Method
- prEN 60454-3-13-1992 Specification for pressure-sensitive adhesive tapes for electrical purposes; part 3: specifications for individual materials; sheet 13: requirements for combined cellulose-viscose woven fabric tapes, one side recovered with a thermoplastic material, the o
Korean Agency for Technology and Standards (KATS), What are thermoplastics
- KS M ISO 3865-2010(2021) Rubber, vulcanized or thermoplastic－Methods of test for staining in contact with organic material
ES-UNE, What are thermoplastics
- UNE-ISO 3865:2016 Rubber vulcanized or thermoplastic. Methods of test for staining in contact with organic material
- UNE-EN 13329:2016+A2:2022 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
IT-UNI, What are thermoplastics
- UNI 4273-1959
- UNI EN 13329-2021 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
Lithuanian Standards Office , What are thermoplastics
- LST EN 62329-3-101-2010 Heat-shrinkable moulded shapes -- Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance -- Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements
- LST EN 14741-2006 Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
- LST EN 13329-2006+A1-2009 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
Danish Standards Foundation, What are thermoplastics
- DS/EN 14741:2006 Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
- DS/EN 13329+A1:2009 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
- DS/EN 13329:2021 Laminate floor coverings – Elements with a surface layer based on aminoplastic thermosetting resins – Specifications, requirements and test methods
AENOR, What are thermoplastics
- UNE-EN 14741:2006 Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
- UNE-EN 13329:2016+A1:2017 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
TR-TSE, What are thermoplastics
- TS 1006-1971 PLAKTI CS DETERM?NATIOOF THE THERMAL STABTLITY OF POLYVINYL CHLORIDE AND RELATED COPOLYMERS AND THEIR COMPOUNDS BY SPLITTING OFF HYDROGEN CHLORIDE
CEN - European Committee for Standardization, What are thermoplastics
- EN ISO 305:2019 Plastics - Determination of thermal stability of poly(vinyl chloride)@ related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method
SE-SIS, What are thermoplastics
- SIS SEN 24 02 60-1968 Rubber and thermoplastic insulated cords and cables Tough rubber sheathed and polychloroprene sheathed flexible cables with heart. Type RDVH and RDOH
DE-DVS, What are thermoplastics
- DVS 2203-1 Beiblatt 4-2008 Testing of welded joints between panels and pipes made of thermoplastics - Requirements on shear and peeling tests for sleeve welding with an incorporated electric heating element (HM) and heated tool sleeve welding (HD) on pipes and fittings
未注明发布机构, What are thermoplastics
- DIN EN 13329:2016 Laminate floor coverings – Elements with a surface layer based on aminoplastic thermosetting resins – Specifications, requirements and test methods
AT-ON, What are thermoplastics
- OENORM B 5161-2021 Plastics piping systems for water supply and for drainage and sewerage with or without pressure - Pipes, joints and fittings made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Supplementary requirements to OE
European Association of Aerospace Industries, What are thermoplastics
- AECMA PREN 2564-1988 Aerospace Series Carbon Fibre Laminates Test Method for the Determination of the Fibre and Resin Fractions and Porosity Content Issue P 1
CENELEC - European Committee for Electrotechnical Standardization, What are thermoplastics
- EN 60454-3-3:1998 Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 3: Polyester Film Tapes with Rubber Thermoplastic Adhesive