ZH
RU
ES

Crystallinity+standard sample+

Crystallinity+standard sample+, Total:499 items.

In the international standard classification, Crystallinity+standard sample+ involves: Thermodynamics and temperature measurements, Semiconducting materials, Testing of metals, Mechanical testing, Powder metallurgy, Analytical chemistry, Particle size analysis. Sieving, Water quality, Protection of and in buildings, Paint ingredients, Construction materials, Ceramics, Wastes, Structures of buildings, Air quality, Aircraft and space vehicles in general, Iron and steel products, Solar energy engineering, Semiconductor devices, Quality, Plastics, Products of the textile industry, Railway rolling stock, Wood, sawlogs and sawn timber, Geology. Meteorology. Hydrology, Leather technology, Test conditions and procedures in general, Coals, Rubber and plastics products, Elements of buildings, Road vehicle systems, Refractories, Road vehicles in general, Ferrous metals, Cereals, pulses and derived products, Materials for aerospace construction, Seals, glands, Organic chemicals, Wood-based panels, Road engineering, Rubber, Adhesives, Physics. Chemistry, Reinforced plastics, Construction of waterways and ports, Construction of railways, Construction industry, Linear and angular measurements, Fuels, Buildings, Inorganic chemicals, Medical equipment, Earthworks. Excavations. Foundation construction. Underground works, Microbiology, Measurement of volume, mass, density, viscosity, Electronic components in general, Medical sciences and health care facilities in general, Textile fibres, Fasteners, Packaging materials and accessories, Hydraulic construction, Optics and optical measurements.

National Metrological Verification Regulations of the People's Republic of China, Crystallinity+standard sample+

JJG 48-2004 Standard Slice of Single Crystal Silicon Resistivity
JJG 48-1990 Verification Regulation of Standard Slice of Single Crystal Silicon Resistivity
JJG(交通) 050-2004 Apparatus for Normal Consistency and Setting Time of Cement Paste

National Metrological Technical Specifications of the People's Republic of China, Crystallinity+standard sample+

JJF 1760-2019 Calibration Specification for Standard Slices of Single Crystal Silicon Resistivity

PL-PKN, Crystallinity+standard sample+

PN Z04018-01-1991 Air purity protection Tests for free crystalline silica General and scope of the standard
PN C04224-1993 Rubber. Standard temperatures, humidities and times for the conditioning and testing of test pieces
PN Z04050-01-1986 Air purity protection Sampling e?uipment Introduction and scope of th standard
PN C87060-01-1987 Fertilizers Determination of physicl properties of powder and crystalline fertilizers General and scope of the standard

JP-JEITA, Crystallinity+standard sample+

JEITA EM3603B-2006 Standard of SOI wafers and metrology

American Society for Testing and Materials (ASTM), Crystallinity+standard sample+

ASTM E794-06 Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
ASTM E794-01 Standard Test Method for Melting and Crystallization Temperatures by Thermal Analysis
ASTM E794-98 Standard Test Method for Melting and Crystallization Temperatures by Thermal Analysis
ASTM E794-06(2018) Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
ASTM E794-06(2012) Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
ASTM F1726-97 Standard Guide for Analyis of Crystallographic Perfection of Silicon Wafers
ASTM B312-96(2002) Standard Test Method for Green Strength for Compacted Metal Powder Specimens
ASTM B312-96 Standard Test Method for Green Strength for Compacted Metal Powder Specimens
ASTM B312-09 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
ASTM F1725-97 Standard Guide for Analysis of Crystallographic Perfection of Silicon Ingots
ASTM D5758-01(2007)e1 Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
ASTM D5758-01 Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
ASTM D5357-98 Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-Ray Diffraction
ASTM D8352-20 Standard Test Method for Determination of Relative Crystallinity of Zeolite Beta by X-Ray Diffraction
ASTM D5357-03(2008)e1 Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction
ASTM D5357-03(2013) Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction
ASTM D5357-03 Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-Ray Diffraction
ASTM D5357-19 Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction
ASTM F847-94(1999) Standard Test Methods for Measuring Crystallographic Orientation of Flats on Single Crystal Silicon Wafers by X-Ray Techniques
ASTM D5758-01(2021) Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
ASTM E1061-01(2007) Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers
ASTM E1061-94(2000) Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers
ASTM E1061-01 Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers
ASTM E1181-02(2008) Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM E1181-02(2008)e1 Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM D4823-95(2003)e1 Standard Guide for Core Sampling Submerged, Unconsolidated Sediments
ASTM D4823-95(2008) Standard Guide for Core Sampling Submerged, Unconsolidated Sediments
ASTM E930-18 Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
ASTM D5758-01(2011)e1 Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
ASTM D5758-01(2015) Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
ASTM C1704/C1704M-09a(2023) Standard Test Method for Sampling and Testing Structural Cementitious Panels
ASTM C1212-98(2015) Standard Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids
ASTM E1061-01(2022) Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers
ASTM E1061-01(2014) Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers
ASTM E2627-10 Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
ASTM E793-06(2012) Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM C827-01a Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
ASTM C827-01 Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
ASTM C827-01a(2005) Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
ASTM A944-22 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
ASTM D5903-96e1 Standard Guide for Planning and Preparing for a Groundwater Sampling Event
ASTM D5903-96(2012) Standard Guide for Planning and Preparing for a Groundwater Sampling Event
ASTM E2627-13(2019) Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
ASTM D5658-95(2006) Standard Practice for Sampling Unconsolidated Waste From Trucks
ASTM D5658-95(2001) Standard Practice for Sampling Unconsolidated Waste From Trucks
ASTM D3665-07e1 Standard Practice for Random Sampling of Construction Materials
ASTM D5658-13 Standard Practice for Sampling Unconsolidated Waste From Trucks
ASTM A944-05 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
ASTM A944-99 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
ASTM A944-99(2004) Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
ASTM A944-10 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
ASTM D6058-96(2011) Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
ASTM D6058-96(2016) Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
ASTM D4453-91(1997) Standard Practice for Handling of Ultra-Pure Water Samples
ASTM D4453-17 Standard Practice for Handling of High Purity Water Samples
ASTM D4453-11 Standard Practice for Handling of High Purity Water Samples
ASTM A673/A673M-05a Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
ASTM A673/A673M-95 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
ASTM A673/A673M-01 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
ASTM A673/A673M-05 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
ASTM A673/A673M-02 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
ASTM A673/A673M-04 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
ASTM A673/A673M-07(2012) Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
ASTM A673/A673M-17 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
ASTM D8187-18 Standard Guide for Interpretation of Standard Humidity Cell Test Results
ASTM F528-99 Standard Test Method of Measurement of Common-Emitter D-C Current Gain of Junction Transistors
ASTM F528-99(2005) Standard Test Method of Measurement of Common-Emitter D-C Current Gain of Junction Transistors
ASTM C827/C827M-10 Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
ASTM B665-92(1997) Standard Practice for Metallographic Sample Preparation of Cemented Tungsten Carbides
ASTM A673/A673M-07 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
ASTM C1704/C1704M-09 Standard Test Method for Sampling and Testing Structural Cementitious Panels
ASTM D5903-96(2006) Standard Guide for Planning and Preparing for a Groundwater Sampling Event
ASTM E141-10(2018) Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling
ASTM C1704/C1704M-09a(2016) Standard Test Method for Sampling and Testing Structural Cementitious Panels
ASTM D3418-21 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D3418-12e1 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D3418-12 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D2591-07(2020) Standard Test Method for Linear Density of Elastomeric Yarns (Short Length Specimens)
ASTM A633/A633M-01 Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
ASTM A633/A633M-00a Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
ASTM A633/A633M-18 Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
ASTM C1704/C1704M-09a Standard Test Method for Sampling and Testing Structural Cementitious Panels
ASTM C1758/C1758M-23 Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete
ASTM D1813-00(2005) Standard Test Method for Measuring Thickness of Leather Test Specimens
ASTM D1813-00 Standard Test Method for Measuring Thickness of Leather Test Specimens
ASTM D1813-00(2010) Standard Test Method for Measuring Thickness of Leather Test Specimens
ASTM D5971/D5971M-16 Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material
ASTM D197-87(2012) Standard Test Method for Sampling and Fineness Test of Pulverized Coal
ASTM D6988-13 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
ASTM D6988-21 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
ASTM D1813-13(2023) Standard Test Method for Measuring Thickness of Leather Test Specimens
ASTM D1813-13(2017) Standard Test Method for Measuring Thickness of Leather Test Specimens
ASTM D1813-13 Standard Test Method for Measuring Thickness of Leather Test Specimens
ASTM D3977-97(2013) Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D2591-07 Standard Test Method for Linear Density of Elastomeric Yarns (Short Length Specimens)
ASTM D2591-07(2013) Standard Test Method for Linear Density of Elastomeric Yarns (Short Length Specimens)
ASTM D6759-02 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
ASTM D6759-07 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
ASTM D6759-09 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
ASTM D6759-16 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
ASTM C1231/C1231M-23 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens
ASTM E793-01 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E793-95 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E793-06(2018) Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E518/E518M-10 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM A148/A148M-03 Standard Specification for Steel Castings, High Strength, for Structural Purposes
ASTM A148/A148M-01 Standard Specification for Steel Castings, High Strength, for Structural Purposes
ASTM A148/A148M-93b(1998) Standard Specification for Steel Castings, High Strength, for Structural Purposes
ASTM A242/A242M-04e1 Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A242/A242M-04 Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A242/A242M-03 Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A242/A242M-03a Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A148/A148M-02 Standard Specification for Steel Castings, High Strength, for Structural Purposes
ASTM A242/A242M-01 Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A242/A242M-00a Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A148/A148M-05 Standard Specification for Steel Castings, High Strength, for Structural Purposes
ASTM A148/A148M-19 Standard Specification for Steel Castings, High Strength, for Structural Purposes
ASTM A148/A148M-08 Standard Specification for Steel Castings, High Strength, for Structural Purposes
ASTM A242/A242M-04(2009) Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A242/A242M-13 Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A242/A242M-13(2018) Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM D6057-96(2011) Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy
ASTM C67-00 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM C67/C67M-19 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM C67-05 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM D5679-95a(2001) Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers
ASTM D5679-95a Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers
ASTM C67/C67M-20 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM C67-03a Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM C67-03 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM C67-02 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM C67/C67M-18 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM C67/C67M-21 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM C67/C67M-23a Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM E2627-13 Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
ASTM D197-87(1994)e1 Standard Test Method for Sampling and Fineness Test of Pulverized Coal
ASTM E1077-91(1997) Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
ASTM E1077-01e1 Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
ASTM D6988-07 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
ASTM E1077-01 Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
ASTM E1077-14(2021) Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
ASTM D6988-08 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
ASTM D197-19 Standard Test Method for Sampling and Fineness Test of Pulverized Coal
ASTM E793-06 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E423-71(2014) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
ASTM C1823/C1823M-20 Standard Test Method for Shear Bond Strength of Adhered Dimension Stone
ASTM A242-79 Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM D2527-83(2001) Standard Specification for Rubber Seals-Splice Strength
ASTM D1015-99 Standard Test Method for Freezing Points of High-Purity Hydrocarbons
ASTM D1015-05 Standard Test Method for Freezing Points of High-Purity Hydrocarbons
ASTM A529/A529M-00 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
ASTM A529/A529M-01 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
ASTM A529/A529M-02 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
ASTM A529/A529M-03 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
ASTM A529/A529M-04 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
ASTM A529/A529M-05 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
ASTM D2719-89(2001)e1 Standard Test Methods for Structural Panels in Shear Through-the-Thickness
ASTM D1015-05(2010) Standard Test Method for Freezing Points of High-Purity Hydrocarbons
ASTM A325-79 Standard Specification for High-Strength Bolts For Structural Steel Joints
ASTM D2719-89(2001) Standard Test Methods for Structural Panels in Shear Through-the-Thickness
ASTM D2719-89(2007) Standard Test Methods for Structural Panels in Shear Through-the-Thickness
ASTM A242-81 Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A148/A148M-20 Standard Specification for Steel Castings, High Strength, for Structural Purposes
ASTM A148/A148M-20e1 Standard Specification for Steel Castings, High Strength, for Structural Purposes
ASTM A529/A529M-19 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
ASTM D1015-05(2015) Standard Test Method for Freezing Points of High-Purity Hydrocarbons
ASTM A148/A148M-15a Standard Specification for Steel Castings, High Strength, for Structural Purposes
ASTM D3549-93a(2000) Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
ASTM D3549/D3549M-18(2023) Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens
ASTM D3549/D3549M-17 Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens
ASTM D3549/D3549M-18 Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens
ASTM D5680-95a Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers
ASTM C67/C67M-23 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM D2915-17 Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products
ASTM C67-13 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM C67-13a Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM C67-14 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM C67-17 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM D4896-01(2016) Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
ASTM C67-16 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM E141-10(2023) Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling
ASTM F2625-10(2016) Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
ASTM D6057-96(2001)e1 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy
ASTM D6057-96 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy
ASTM D6057-96(2006) Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy
ASTM D6056-96(2011) Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy
ASTM D6582-00(2005)e1 Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling
ASTM D6582-00 Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling
ASTM D6582-00(2005) Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling
ASTM C39/C39M-20 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-17a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-12 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-11a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM D6988-03 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
ASTM D197-87(2007) Standard Test Method for Sampling and Fineness Test of Pulverized Coal
ASTM D197-87(2002) Standard Test Method for Sampling and Fineness Test of Pulverized Coal
ASTM C39/C39M-01 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-99 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-05e1 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-05 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-03 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-04 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-04a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-21 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM D3977-97(2019) Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM E1077-01(2005) Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
ASTM C39/C39M-05e2 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-09 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-15 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-16a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-16b Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM D3977-97(2013)e1 Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM E1077-14 Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
ASTM F1925-09 Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants
ASTM D934-08 Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
ASTM A262-02ae1 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A262-02ae2 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A262-02 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A262-02a Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A262-02ae3 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A262-10 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A262-13 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM D605-82(1996)e1 Standard Specification for Magnesium Silicate Pigment (Talc)
ASTM D6059-96(2011) Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy
ASTM F2625-07 Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
ASTM C297-94(1999) Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
ASTM E518-09 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM D2555-06 Standard Practice for Establishing Clear Wood Strength Values
ASTM A633-79a Standard Specification for Normalized High-Strength Low-Alloy Structural Steel
ASTM E72-80 Standard Methods of Conducting Strength Tests of Panels for Building Construction
ASTM E518/E518M-21 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM E72-77 Standard Methods of Conducting Strength Tests Of Panels For Building Construction
ASTM E518/E518M-22 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM E518/E518M-15 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM A441-79 Standard Specification for High- Strength Low- Alloy Structural Manganese Vanadium Steel
ASTM A441-81 Standard Specification for High-Strength Low-Alloy Structural Manganese Vanadium Steel
ASTM A529/A529M-14 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
ASTM D5679-95a(2006) Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers
ASTM E2015-99 Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination
ASTM C67-09 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM E141-10 Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling
ASTM C1758/C1758M-11 Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete
ASTM D5679-95a(2012) Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers
ASTM D5680-14(2022) Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers
ASTM C1758/C1758M-13 Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete
ASTM E141-91(2003)e1 Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling
ASTM D5679-16 Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers
ASTM E975-03 Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation
ASTM D934-80(1999) Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
ASTM E1132-99a Standard Practice for Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica
ASTM E1132-13e1 Standard Practice for Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica
ASTM E975-03(2008) Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation
ASTM E1132-13 Standard Practice for Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica
ASTM D5611-94(2002) Standard Guide for Conducting a Sensitivity Analysis for a Ground-Water Flow Model Application
ASTM D6717-01 Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)
ASTM D5971-07 Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material
ASTM D5611-94(2008) Standard Guide for Conducting a Sensitivity Analysis for a Ground-Water Flow Model Application
ASTM D1059-17(2022) Standard Test Method for Yarn Number Based on Short-Length Specimens
ASTM D3173-03(2008) Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
ASTM D3549/D3549M-11 Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
ASTM D1151-00(2022) Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
ASTM E2015-04 Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination
ASTM D5680-95a(2001) Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers
ASTM D345-02 Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications
ASTM D4896-01 Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
ASTM D4896-95 Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
ASTM D4896-01(2008)e1 Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
ASTM C67-11 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM C67-12 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM D345-02(2010) Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications
ASTM E2015-04(2021) Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination
ASTM E2015-04(2014) Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination
ASTM D5680-14 Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers
ASTM E2625-09 Standard Practice for Controlling Occupational Exposure to Respirable Crystalline Silica for Construction and Demolition Activities
ASTM E975-22 Standard Test Method for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation
ASTM E975-13 Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation
ASTM F1925-22 Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants
ASTM D934-22 Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
ASTM D934-13 Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
ASTM D5187-10(2015)e1 Standard Test Method for Determination of Crystallite Size (Lc) of Calcined Petroleum Coke by X-Ray Diffraction
ASTM A572/A572M-21 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM A572/A572M-02 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM E2776-18 Standard Guide for Correlation of Results of Solid Particle Size Measurement Instruments
ASTM C567-00 Standard Test Method for Determining Density of Structural Lightweight Concrete
ASTM A572/A572M-07 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM A572/A572M-06 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM A572/A572M-03 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM A572/A572M-03ae1 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM A572/A572M-04 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM A572/A572M-01 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM A572/A572M-00a Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM C952-91(1997)e1 Standard Test Method for Bond Strength of Mortar to Masonry Units
ASTM B294-10 Standard Test Method for Hardness Testing of Cemented Carbides
ASTM A572/A572M-12 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM A572/A572M-03a Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM E2776-20 Standard Guide for Correlation of Results of Solid Particle Size Measurement Instruments
ASTM A572/A572M-21e1 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM C952-12 Standard Test Method for Bond Strength of Mortar to Masonry Units
ASTM D2719-19 Standard Test Methods for Wood Structural Panels in Shear Through-the-Thickness
ASTM C297/C297M-15 Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
ASTM C297/C297M-16 Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
ASTM A572/A572M-13 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM A572/A572M-13a Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM A572/A572M-15 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM A572/A572M-18 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM A148/A148M-14 Standard Specification for Steel Castings, High Strength, for Structural Purposes
ASTM A148/A148M-15 Standard Specification for Steel Castings, High Strength, for Structural Purposes
ASTM A529/A529M-05(2009) Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
ASTM D2936-95 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
ASTM D2936-95(2001)e1 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
ASTM D3967-05 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
ASTM D4533-91(1996) Standard Test Method for Trapezoid Tearing Strength of Geotextiles
ASTM D3967-95a(2001) Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
ASTM D3967-95a Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
ASTM B528-99 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
ASTM D3967-95a(2004) Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
ASTM C39/C39M-11 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM D6717-07(2012) Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)
ASTM D6717-07 Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)
ASTM D2936-20 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
ASTM B528-16 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
ASTM B528-10 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
ASTM C39/C39M-14a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-15a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-17b Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM D1059-17 Standard Test Method for Yarn Number Based on Short-Length Specimens
ASTM D3967-08 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
ASTM D3967-16 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
ASTM D6058-96(2006) Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
ASTM D6058-96(2001) Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
ASTM D6058-96 Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
ASTM D3549-03 Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
ASTM D4135-82(1998) Standard Practice for Sampling Phytoplankton With Depth-Integrating Samplers
ASTM D4135-82(2012) Standard Practice for Sampling Phytoplankton With Depth-Integrating Samplers
ASTM D4796-17(2022) Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials
ASTM D5380-93(2009) Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis
ASTM E1132-21 Standard Practice for Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica
ASTM F1404-92(2007) Test Method for Crystallographic Perfection of Gallium Arsenide by Molten Potassium Hydroxide (KOH) Etch Technique
ASTM D3217-07 Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations
ASTM F2778-09(2015) Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
ASTM F2778-09(2020) Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
ASTM D772-47(1975) Standard Method of Evaluating Degree Of Flaking (Scaling) Of Exterior Paints
ASTM D1016-99(2004)e1 Standard Test Method for Purity of Hydrocarbons from Freezing Points
ASTM D1016-05e1 Standard Test Method for Purity of Hydrocarbons from Freezing Points
ASTM D1016-05 Standard Test Method for Purity of Hydrocarbons from Freezing Points
ASTM D3654/D3654M-06 Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
ASTM E518-03 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM C1072-00a Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM C952-02e1 Standard Test Method for Bond Strength of Mortar to Masonry Units
ASTM C952-02 Standard Test Method for Bond Strength of Mortar to Masonry Units
ASTM D1062-96e1 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM C364/C364M-06 Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
ASTM D1016-99 Standard Test Method for Purity of Hydrocarbons from Freezing Points
ASTM C952-02(2009) Standard Test Method for Bond Strength of Mortar to Masonry Units
ASTM D1016-05(2010) Standard Test Method for Purity of Hydrocarbons from Freezing Points
ASTM C1072-19 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM D8454/D8454M-22 Standard Test Method for Open-Hole Compressive Strength of Sandwich Constructions
ASTM D8453/D8453M-22 Standard Practice for Open-Hole Flexural Strength of Sandwich Constructions
ASTM C1072-12 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C1072-22 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C1072-13e1 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM D1062-08(2015) Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM C364/C364M-16 Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
ASTM D1016-05(2015) Standard Test Method for Purity of Hydrocarbons from Freezing Points
ASTM C1072-11 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C1072-13 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM D1062-08 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM A572/A572M-12a Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM B528-05 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
ASTM D2936-95(2004)e1 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
ASTM D2936-95(2001) Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
ASTM D5971-01 Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material
ASTM D5971-96 Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material
ASTM E949-88(1996) Standard Test Method for Total Moisture in a Refuse-Derived Fuel Laboratory Sample
ASTM E949-88(2004) Standard Test Method for Total Moisture in a Refuse-Derived Fuel Laboratory Sample
ASTM D2936-08 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
ASTM C39/C39M-10 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM D2247-68(1973) Standard Method for Testing Coated Metal Specimens At 100% Relative Humidity
ASTM E1247-12(2017) Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry
ASTM B528-16(2020)e1 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
ASTM E955-88(2009)e1 Standard Test Method for Thermal Characteristics of Refuse-Derived Fuel Macrosamples
ASTM C39/C39M-09a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM D5971/D5971M-13 Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material
ASTM D5817-03 Standard Practice for Carbon Black, Pelleted-Reduction, Blending, and Drying of Gross Samples for Testing
ASTM D5817-03a Standard Practice for Carbon Black, Pelleted8212;Reduction, Blending, and Drying of Gross Samples for Testing
ASTM E2867-14(2019) Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry

Association Francaise de Normalisation, Crystallinity+standard sample+

NF C96-611/A1:1972 Semiconductors Junction transistors Particular Standard Sheets
NF P21-399:2007 Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample.
NF X43-295:1995 Air des lieux de travail - Détermination par rayons X de la concentration de dépôt alvéolaire de silice cristalline - Échantillonnage par dispositif à coupelle rotative.

Korean Agency for Technology and Standards (KATS), Crystallinity+standard sample+

KS B 5530-2003 Metallic materials-Rockwell hardness test-Part 3:Calibration of reference blocks
KS B 5539-2002 Metallic materials－Vickers hardness test－Part 3：Calibration of reference blocks
KS B 5531-2005 Standardized blocks of shore hardness
KS B 5530-1986 Metallic materials-Rockwell hardness test-Part 3:Calibration of reference blocks
KS F 2462-2021 Standard test method for density of structural light weight concrete
KS K 0742-2021 Standard test method for individual geogrid junction strength
KS A ISO 5725-4:2021 Accuracy(trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method

Professional Standard - Electron, Crystallinity+standard sample+

SJ/Z 3206.9-1989 Methods for inspection of standard samples or sample uniformity
SJ/T 10224-1991 Graphic and Symbol base for electronic Products CAD drawing.Standard architecture part graphic

Professional Standard - Grain, Crystallinity+standard sample+

LS/T 15121.2-2008 Early indica rice processing precision standard sample standard first class
LS/T 15121.3-2008 Early indica rice processing precision standard sample standard second class
LS/T 15122.2-2008 Late Indica Rice Processing Precision Standard Sample Standard First Class
LS/T 15122.3-2008 Late Indica Rice Processing Precision Standard Sample Standard Second Class
LS/T 15123.2-2008 Late japonica rice processing precision standard sample standard first class
LS/T 15123.3-2008 Late japonica rice processing precision standard sample standard second class
LS/T 15111.3-2008 Southern wheat flour processing precision standard sample standard flour
LS/T 15112.3-2008 Northern wheat flour processing precision standard sample standard flour
LS/T 15121.1-2008 Special grade standard sample of early indica rice processing precision
LS/T 15122.1-2008 Standard sample of processing precision of late indica rice
LS/T 15123.1-2008 Standard sample of processing precision of late japonica rice
LS/T 1214-2008 Technical specification for making standard samples of wheat hardness index
LS/T 15111.1-2008 Special first-class standard sample of processing precision of southern wheat flour
LS/T 15111.2-2008 Southern wheat flour processing precision standard sample special second class
LS/T 15112.1-2008 Special first-class standard sample of northern wheat flour processing precision
LS/T 15112.2-2008 Second-class special standard sample of northern wheat flour processing precision

Group Standards of the People's Republic of China, Crystallinity+standard sample+

T/SXWIIA 001-2021 Technical standard for application of capillary crystalline waterproofing system
T/CPIA 0048.1-2022 Manufacturing guidelines for crystalline silicon standard photovoltaic cells for production lines Part 1: Homogeneous crystalline silicon photovoltaic cells
T/LCKSX 03-2020 Design Standards for Residential Buildings with Prefabricated Integral Shear Wall Structure in Liaocheng City (Structure Split Sample Diagram)
T/CECS 914-2021 Test standard for bond strength of facing stone in construction engineering
T/CACM 062-2018 Clinical diagnostic criteria for coronary atherosclerotic heart disease with phlegm and blood stasis syndrome

German Institute for Standardization, Crystallinity+standard sample+

DIN 53235-2:2005 Testing of pigments - Tests on specimens having standard depth of shade - Part 2: Adjustment of specimens to standard depth of shade
DIN 53235-1:2005 Testing of pigments - Tests on specimens having standard depth of shade - Part 1: Standard depths of shade
DIN 5512-4:1997 Materials for rail vehicles - Steels - Part 4: Fine grain structural steels; selected standard
DIN EN 14358:2007 Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample; German version EN 14358:2006
DIN 53019-1:1980 Viscometry; Determination of viscosities and flow curves using standard design rotary viscometers with a standard geometry measuring system

CU-NC, Crystallinity+standard sample+

NC 90-20-12-1989 Standards System for Metrological. Assurance. Reference Standard Samples. Standardized Metrological Characteristics

U.S. Military Regulations and Norms, Crystallinity+standard sample+

ARMY MIL-STD-1170 VALID NOTICE 1-2003 VISUAL STANDARDS AND COMPARISON METHODS FOR EVALUATING GRAIN CONFIGURATION IN 7.62 MM CARTRIDGE CASES
ARMY MIL-STD-1170-1964 VISUAL STANDARDS AND COMPARISON METHODS FOR EVALUATING GRAIN CONFIGURATION IN 7.62 MM CARTRIDGE CASES

Professional Standard - Agriculture, Crystallinity+standard sample+

212兽药质量标准2017年版 Volume One of Chemical Drugs Quality Standards for Veterinary Drugs Nine-painted Crystalline Sulfonamide
213兽药质量标准2017年版 Volume I of Chemical Drugs Quality Standards for Veterinary Drugs Jiuhua Sterilized Crystalline Sulfonamide
CNAS-EL-19：2021 Specific requirements for raw materials to be pure substances in the certification of reference material/standard sample producers
CNAS-EL-19:2021 Specific requirements for raw materials to be pure substances in the certification of reference material/standard sample producers

RO-ASRO, Crystallinity+standard sample+

STAS SR ISO 10275-1:1997 PI aste rs - General specification sample preparing, preparation of normal consistency paste and determination of white degree
STAS 7626-1979 Metallography MICROSTRUCTURE Standard scales of steels

TZ-TBS, Crystallinity+standard sample+

TZS 62 Pt.1-1980 Tanzania Standard Concrete —Part 1:Method of sampling fresh concrete

PH-BPS, Crystallinity+standard sample+

PNS ASTM C1231/C1231M:2021 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens

TH-TISI, Crystallinity+standard sample+

TIS 243-1977 Standard method of sampling and testing brick and structural clay tile

The American Road & Transportation Builders Association, Crystallinity+standard sample+

AASHTO T 243M/T 243-2008 Standard Method of Test for Sampling Procedure for Impact Testing of Structural Steel
AASHTO M 226-1980 Standard Specification for Viscosity-Graded Asphalt Cement
AASHTO T 243M_T 243-2007 Standard Method of Test for Sampling Procedure for Impact Testing of Structural Steel
AASHTO T 22-2010 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
AASHTO T 22-2014 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
AASHTO M 164M-2001 Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric] HM-22; Part IB; ASTM Designation A 325M-00
AASHTO T 143-2013 Standard Method of Test for Sampling and Testing Calcium Chloride for Roads and Structural Applications

Professional Standard - Ocean, Crystallinity+standard sample+

HY/T 229-2018 Structure confirmation method of marine bioactive material of certified reference material

AASHTO - American Association of State Highway and Transportation Officials, Crystallinity+standard sample+

T 243M/T 243-2008 Standard Method of Test for Sampling Procedure for Impact Testing of Structural Steel
T 243M/T 243-2007 Standard Method of Test for Sampling Procedure for Impact Testing of Structural Steel
T 243M/T 243-2019 Standard Method of Test for Sampling Procedure for Impact Testing of Structural Steel
M 164-2005 Standard Specification for High-Strength Bolts for Structural Steel Joints
M 164-1994 Standard Specification for High-Strength Bolts for Structural Steel Joints
T 22-2007 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
T 22-2014 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
T 22-2010 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
T 143-2013 Standard Method of Test for Sampling and Testing Calcium Chloride for Roads and Structural Applications
T 143-2004 Standard Method of Test for Sampling and Testing Calcium Chloride for Roads and Structural Applications
T143-1991 Standard Method of Test for Sampling and Testing Calcium Chloride for Roads and Structural Applications

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Crystallinity+standard sample+

GB 50153-1992 Unified design standard for reliability of engineering structures
GB 50068-2001 Unified standard for reliability design of building structres
GB/T 13766-1992 Textiles--Test for colour fastness--Test control specimen and standard of fading for nitrogen oxides and burnt gas fumes
GB/T 2941-1991 Rubber-Standard temperatures,humidities and times for the conditioning environmental and testing of test pieces
GB/T 50283-1999 Unified standard for reliability design of highway engineering structures
GB 50158-1992 Unified standard of reliability of structrual design for harbour engineering
GB 50216-1994 Unified design standard for reliability of railway engineering structures
GB 50216-94 Unified standard for reliability design of railway engineering structure
GB 50199-1994 Unified design standard for reliability of hydraulic engineering structures

RU-GOST R, Crystallinity+standard sample+

GOST 938.15-1970 Leather. Method of measuring thickness of samples and thicknes of leather in the standard point
GOST 9378-1975 Surface roughness comparison specimens. Technical requirements
GOST 5916-1970 Hexagon lock nuts (standard precision). Construction and dimensions

FI-SFS, Crystallinity+standard sample+

SFS 4404-1979

Danish Standards Foundation, Crystallinity+standard sample+

DS/ISO 471:1985 Rubber. Standard temperatures, humidities and times for the conditioning and testing of test pieces
DS/EN 14358:2007 Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample
DS/ISO 5725-3/Corr.1:2002 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method

Institute of Electrical and Electronics Engineers (IEEE), Crystallinity+standard sample+

IEEE Std 1160-1993 IEEE Standard Test Procedures for High-Purity Germanium Crystals for Radiation Detectors

Professional Standard - Construction Industry, Crystallinity+standard sample+

JGJ 110-2008 Testing standard for adhesive strength of tapestry brick of construction engineering
JGJ 110-1997 Standard of adhesive strength test of tapestry brick for building engineering
JGJ 110-1997（条文说明） Test standard for bonding strength of facing bricks in construction engineering
JGJ/T 441-2019 Technical standards for vibration comfort of building floor structures
JGJ/T 110-2017 Testing standard for adhesive strength of tapestry brick of construction engineering

Beijing Provincial Standard of the People's Republic of China, Crystallinity+standard sample+

DB11/T 1845-2021 Fineness standard of steel structure engineering construction process model

Standard Association of Australia （SAA）, Crystallinity+standard sample+

AS/NZS 2891.14.3:2013

International Organization for Standardization (ISO), Crystallinity+standard sample+

ISO 471:1983 Rubber; Standard temperatures, humidities and times for the conditioning and testing of test pieces

Lithuanian Standards Office , Crystallinity+standard sample+

LST EN 14358-2007 Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample

Professional Standard - Building Materials, Crystallinity+standard sample+

JC/T 727-2005 Apparatus for determining normal consistency and setting time of cement paste

Society of Automotive Engineers (SAE), Crystallinity+standard sample+

SAE AMS3656G-2010 Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered

Taiwan Provincial Standard of the People's Republic of China, Crystallinity+standard sample+

CNS 6685-1980 Preparation, Marking and Measuring of Fabric Specimens in Tests for Determination of Dimensional Change

Canadian Standards Association (CSA), Crystallinity+standard sample+

CSA A82.4/.5/.6-M1978-1978 Structural Clay Load-Bearing Wall Tile/Structural Clay Non-Load Bearing Wall Tile/Standard Methods for Sampling and Testing Structural Clay Tile R(1998)

KR-KS, Crystallinity+standard sample+

KS A ISO 5725-4-2021 Accuracy(trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method

European Committee for Standardization (CEN), Crystallinity+standard sample+

EN 518:1995 Structural Timber - Grading - Requirements for Visual Strength Grading Standards

未注明发布机构, Crystallinity+standard sample+

BS EN 518:1995(1999) Structural timber — Grading — Requirements for visual strength grading standards
DIN EN 518:1996 Structural timber, Grading — Requirements for visual strength grading standards
BS ISO 5725-3:1994(2002) Accuracy (trueness and precision) of measurement methods and results — Part 3 : Intermediate measures of the precision of a standard measurement method