ZH
RU
ES

Spectral Analysis Spectral Inspection

Spectral Analysis Spectral Inspection, Total:499 items.

In the international standard classification, Spectral Analysis Spectral Inspection involves: Optics and optical measurements, Non-ferrous metals, Standardization. General rules, Quality, Analytical chemistry, Education, Ferrous metals, Fibre optic communications, Non-metalliferous minerals, Products of non-ferrous metals, Powder metallurgy, Power stations in general, Particle size analysis. Sieving, Lubricants, industrial oils and related products, Electronic components in general, Information sciences. Publishing, Optoelectronics. Laser equipment, Non-destructive testing, Fuels, Environmental protection, Testing of metals, Ferroalloys, Metalliferous minerals, Iron and steel products, Water quality, Refractories, Nuclear energy engineering, Construction materials, Natural gas, Special measuring equipment for use in telecommunications, Vocabularies, Woodworking equipment, Optical equipment, Protection against crime, Seals, glands, Shafts and couplings, Products of the chemical industry, Paint ingredients, Protection against fire, Petroleum products in general, Test conditions and procedures in general, Jewellery, Pipeline components and pipelines, Coals.

National Metrological Verification Regulations of the People's Republic of China, Spectral Analysis Spectral Inspection

JJG(电子) 30901-2006 Verification Regulations for Spectrum Analyzers
JJG 1035-2008 Verification Regulation of Optical Spectrum Analyzers in Telecommunication
JJG 1035-2022 Communication Spectrum Analyzer
JJG 955-2000 Verification Regulation of Special Analysis Microdensitimeters

Taiwan Provincial Standard of the People's Republic of China, Spectral Analysis Spectral Inspection

CNS 14341-1999 Optical spectrum analyzer
CNS 12416-1988 Genenral Rules for Emission Spectroscopic Analysis
CNS 14896-14-2005 Titanium - Method for atomic emission spectrometric analysis
CNS 12416-2006 General rules for atomic emission spectrometry
CNS 14896.14-2005 Titanium - Method for atomic emission spectrometric analysis
CNS 10006-1984 Method for Photoelectric Emission Spectrochemical Analysis of Iron And Steel
CNS 12013-1987 Method of Test for Lead in Gasoline by Atomic Absorption Spectrometry
CNS 9705-1984 General Rules for Emission-Spectroscopic Analysis of Iron and Steel
CNS 10503-1984 Emission-Spectroscopic Analysis for Pig Iron and Cast Iron
CNS 13107-1992 Method of Test for Chromium in Water by Atomic Absorption Spectrophotometry
CNS 9706-1984 General Rules for Photoelectric Emission Spectrochemical Analysis of Iron and Steel
CNS 13921-1997 Method of atomic emission spectrophotoelectric analysis for die casting zinc alloy
CNS 10005-1984 General Rules for Photoelectric Emission Spectrochemical Analysis of Metallic Materials
CNS 12126-1987 Method of Chemical Analysis by Atomic Absorption Spectrophotometry for Copper and Copper Alloys
CNS 13388-1994 Methods for Inductively Coupled Plasma Emission Spectrochemical Analysis of Steel
CNS 11071-1984 Emission-Spectroscopic Analysis for Carbon Steel and Low Alloy Steel
CNS 11209-1995 General Rules for Chemical Analysis by Atomic Absorption Spectrophotometry
CNS 11206-2002 Iron and steel─Methods for atomic absorption spectrometric analysis
CNS 12788-1990 Method of X-ray Fluorescence Spectrometric Analysis of Refractory Bricks and Refractory Mortars
CNS 5467-1980 The Method of Test for Molybdenum in Water (Atomic Absorption Spectrophotometry)

RO-ASRO, Spectral Analysis Spectral Inspection

STAS 1706/17-1971 CUPPER speelrochemical analysis
STAS 11464-1980 IRON AND STEEL Spectrochemical analysis
STAS 5177-1981 EMISSION SPECTROGRAPHICAL ANALYSIS Terminology
STAS 12368-1985 Modifier alloys for cast irons SPECTROGRAPHIC ANALYSIS BY EMISSION
STAS 10837/1-1977 SELENIUM General specifications for chemical and spectral analysis
STAS 1776/1-1978 LEAD General specifications for carrying out chemical and spectral analysis
STAS 1706/1-1985 COPPKH General directions for c?emical and spectral analysis carrying-out
STAS 1776/14-1978 LEAD Emission spectral analysis with direct reading

U.S. Air Force, Spectral Analysis Spectral Inspection

AIR FORCE A-A-59684 A-2009 OPTICAL SPECTRUM ANALYZER
AIR FORCE A-A-59684-2004 OPTICAL SPECTRUM ANALYZER

Korean Agency for Technology and Standards (KATS), Spectral Analysis Spectral Inspection

KS C 6918-1995 Test methods of fiber-optic spectrum analyzer
KS M 0028-2009(2019) General rules for light emission spectrochemical analysis
KS D 2086-2004 Method for atomic emission spectrometric analysis of titanium
KS D 2518-2005 Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS D ISO 3815-2002(2006) Zinc and zinc alloys－Spectrographic analysis
KS D 2518-1982 Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS D 1681-2003 Method for emission spectrochemica1 analysis of aluminium ingot
KS D 1684-2008 Methods for emission spectrographic analysis of magnesium ingot
KS D 1682-2008 Methods for emission spectrochemical analysis of lead ingot
KS D 1654-1993 General Rules for X-ray Fluorescence Spectrometric Analysis of Iron and Steel
KS D 1682-2020 Method for photoelectric emission spectrochemical analysis of lead metal
KS D 1654-2003(2016) General rules for X-ray fluorescence spectrometric analysis of iron and steel
KS D 2710-2019 Methods for X-ray fluorescence spectrometric analysis of ferroniobium
KS D ISO 3815:2011 Zinc and zinc alloys－Spectrographic analysis
KS D 2558-1995 Method for emission spectrographic analysis of tantalum
KS D 2553-2015 Tantalum－Method for atomic absorption spectrometric analysis
KS D 1684-1993 Methods for emission spectrographic analysis of magnesium ingot
KS D 1682-1993 Methods for emission spectrochemical analysis of lead ingot
KS D 1684-1985 Methods for emission spectrographic analysis of magnesium ingot
KS D 2518-2015 Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS D 1655-1993 Method for X-Ray Fluorescence Spectrometric Analysis of Iron and Steel
KS M 0017-1995 General rules for X-ray fluorescence spectrometric analysis
KS D 1898-2019 Copper alloys —Methods for X-ray fluorescence spectrometric analysis
KS L 3316-2014 Method for X-ray fluorescence spectrometric analysis of refractory products
KS D 1686-2011(2021) Method for x-ray fluorescence spectrometric analysis of ferroalloys
KS L 3316-2014(2019) Method for X-ray fluorescence spectrometric analysis of refractory products
KS D 2518-2015(2020) Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS L 3316-1998 Method for X-ray fluorescence spectrometric analysis of refractory products
KS L 3316-1988 Method for X-ray fluorescence spectrometric analysis of refractory products
KS D 2569-2005 Methods for ICP emission spectrometric analysis of tantalum
KS D 2568-2008 Tantalum－Method for atomic absorption spectrometric analysis
KS D 2569-2016 Methods for ICP emission spectrometric analysis of tantalum
KS D 2553-2015(2020) Tantalum－Method for atomic absorption spectrometric analysis
KS E 3030-2007(2012) Atomic absorption spectrochemical analysis for iron ores
KS D 2568-2019 Tantalum－Method for atomic absorption spectrometric analysis
KS D 2569-2016(2021) Methods for ICP emission spectrometric analysis of tantalum
KS E 3030-1982 Atomic absorption spectrochemical analysis for iron ores
KS D 1650-1993 General rules for photoelectric emission spectrochemical analysis of metal materials
KS D 1680-2008 General rules for photographic emission spectrochemical analysis of metal materials
KS D 1659-2008 Methods for atomic absorption spectrophotometric analysis of iron and steel
KS M 0016-1995 General rules for atomic absorption spectrochemical analysis
KS D 1681-1993 Method for emission spectrochemical analysis of aluminium ingot
KS D 2086-1993 Methods for emission spectrochemical analysis of titanium
KS M 0016-2010(2020) General rules for atomic absorption spectrochemical analysis
KS C 6918-1995(2020) Test methods of fiber-optic spectrum analyzer
KS D 1684-2008(2018) Methods for emission spectrographic analysis of magnesium ingot
KS D 2086-2019 Methods for atomic emission spectrometric analysis of titanium
KS C IEC 61290-5-1-2007(2022) Optical amplifiers－Test methods－Part 5－1：Reflectance parameters －Optical spectrum analyzer method
KS C IEC 61290-5-1-2007(2017) Optical amplifiers－Test methods－Part 5－1：Reflectance parameters －Optical spectrum analyzer method
KS M 0012-2009(2019) General rules for molecular absorptiometric analysis
KS E 3076-2017 Methods for X－ray fluorescence spectrometric analysis of silica stone and silica sand
KS D 1650-2008 General rules for photoelectric emission spectrochemical analysis of metal materials
KS E 3076-2022 Methods for X-ray fluorescence spectrometric analysis of silica stone and silica sand
KS D 1899-2019 Methods for photoelectric emission spectrochemical analysis of electrolytic cathode copper
KS D 1929-2019 Methods for photoelectric emission spectrochemical analysis of die casting zinc alloys
KS D 1929-2004 Methods for photoelectric emission spectrochemical analysis of die casting zinc alloys
KS D 2597-1996(2021) Method for X-ray fluorescence spectrometric analysis of zirconium and zirconium alloys
KS D 1899-2003 Methods for emission spectrochemical analysis of electrolytic cathode copper
KS D 1683-1993 Method for emission spectrochemical analysis of silver ingot
KS D 1681-2018 Method for emission spectrochemical analysis of aluminium ingot
KS M 0032-2009(2019) General rules for ICP emission spectrochemical analysis
KS D 1852-2005 Methods for photoelectric emission spectrochemical analysis of aluminium and aluminium alloys
KS L 3316-2009 Method for X-ray fluorescence spectrometric analysis of refractory brikcs and refractory mortars
KS E 3075-2002 Method for X－ray fluorescence spectrometric analysis of limestone and dolomite
KS D 1852-2015 Methods for photoelectric emission spectrochemical analysis of aluminium and aluminium alloys
KS D 1852-2020 Methods for optical emission spectrochemical analysis of aluminium and aluminium alloys
KS D 1655-2008(2019) Method for X-ray fluorescence spectrometric analysis of iron and steel
KS I ISO 23913-2009(2019) Water quality－Determination of chromium(VI)－Method using flow analysis(FIA and CFA) and spectrometric detection
KS I ISO 11732-2008(2018) Water quality－Determination of ammonium nitrogen－Method by flow analysis(CFA and FIA) and spectrometric detection
KS C IEC 61290-3-1-2005(2020) Optical amplifiers－Test methods－Part 3－1：Noise figure parameters－Optical spectrum analyzer method
KS D 1673-2007 Methods for inductively coupled plasma emission spectrochemical analysis of steel
KS D ISO 3815-1:2006 Zinc and zinc alloys-Part 1:Analysis of solid samples by optical emission spectrometry
KS E 3075-2017 Method for X－ray fluorescence spectrometric analysis of limestone and dolomite
KS D 1686-2011(2016) Method for x-ray fluorescence spectrometric analysis of ferroalloys
KS E 3075-2022 Method for X-ray fluorescence spectrometric analysis of limestone and dolomite
KS D ISO 3816:2011 Zinc ingots－Selection and preparation of samples for spectrographic analysis
KS D 1685-1993 Methods for emission spectrochemical analysis of zinc metal
KS D 1658-1993 Emission-spectroscopic analysis for carbon steel and low alloy steel
KS D 1658-2003(2016) Emission-spectroscopic analysis for carbon steel and low alloy steel
KS D 1687-2007 Emission-spectroscopic analysis for pig iron and cast iron
KS C IEC 61290-10-1-2005(2020) Optical amplifiers－Test methods－Part 10－1：Multichannel parameters－Pulse method using an optical switch and optical spectrum analyzer
KS C IEC 61290-3-1:2005 Optical amplifiers－Test methods－Part 3－1：Noise figure parameters－Optical spectrum analyzer method

RU-GOST R, Spectral Analysis Spectral Inspection

GOST 8776-1999 Cobalt. Methods of chemical-atomic-emission spectral analysis
GOST 16274.8-1977 Bismuth. Spectral methods of analysis
GOST 14339.5-1991 Tungsten. Methods of spectral analysis
GOST 8857-1977 Lead. Method of spectral analysis
GOST 12223.0-1976 Iridium. Method of spectral analysis
GOST 12227.0-1976 Rodium. Method of spectral analysis
GOST 14316-1991 Molybdenum. Spectrum analysis methods
GOST 8776-1979 Cobalt. Methods of chemical-atomic-emission spectral analysis
GOST 18895-1997 Steel. Method of photoelectric spectral analysis
GOST 17261-1977 Zinc. Spectral method of analysis
GOST 15483.10-2004 Tin. Methods of atomic-emission spectral analysis
GOST 3221-1985 Primary aluminium. Methods of spectral analysis
GOST 12228.1-1978 Ruthenium. Method of spectral analysis
GOST 17818.15-1990 Graphite. Method of spectrum analysis
GOST 22397-1977 Zinc powder. Method of spectral analysis
GOST 27611-1988 Cast iron. Photoelectrical sspeciral method of analisis
GOST 18895-1981 Steel. Method of photoelectric spectral analysis
GOST 15483.10-1978 Tin. Spectral methods for determination of bismuth, iron, copper, arsenic, lead, antimony, zinc and aluminium
GOST 23328-1995 Zinc alloys. Methods of spectral analysis
GOST 1367.1-1983 Antimony. Spectral method for the determination of impurities without preliminary concentration
GOST 1367.11-1983 Antimony. Chemical-spectral method of analysis
GOST 7727-1981 Aluminium alloys. Methods of spectral analysis
GOST 7728-1979 Magnesium alloys. Methods of spectral analysis
GOST 12224.1-1978 Osmimum. Chemical-spectral method of analysis
GOST 13348-1974 Antimonous antimonides. Method of spectral analysis
GOST 23902-1979 Titanium alloys. Methods of spectral analysis
GOST 7.28-1980 System of standards "information, libraries and publishing". Representation of extended Latin alphabet for information interchange on magnetic tapes
GOST 23328-1978 Zinc antifriction alloys. Methods of spectral analysis
GOST 9717.2-1982 Copper. Method of spectral analysis of metal standart specimens with photographic registration of spectrum
GOST 33405-2015 Testing of chemicals of environmental hazard. Determination of the UV-VIS absorption spectral by spectrophotometric method
GOST 30082-1993 Zinc-aluminium alloys. Spectral method of analysis
GOST 27809-1995 Cast iron and steel. Methods of spectrographic analysis
GOST 9816.4-1984 Technical tellurium. Method of spectral analysis
GOST 12551.2-1982 Alloys platinum-copper. Methods of spectral analysis
GOST 12553.2-1977 Platinum-palladium alloys. Method of spectral of analysis
GOST 12554.2-1983 Platinum-ruthenium alloys. Method of spectral analysis
GOST 12555.2-1983 Silver-platinum alloys. Method of spectral analysis
GOST 12556.2-1982 Alloys platinum-rhodium. Methods of spectral analysis
GOST 12558.2-1978 Palladium-silver alloys. Method of spectral of analysis
GOST 12562.2-1982 Alloys gold-platinum. Methods of spectral analysis
GOST 12563.2-1983 Gold-palladium alloys. Method of spectral analysis
GOST 16321.2-1970 Silver-copper alloys. Method of spectral analysis
GOST 16273.1-1985 Technical selenium. Method of spectral analysis
GOST 27809-1988 Steel and cast iron. Methods of spectropgapnic analysis
GOST R 55080-2012 Cast iron. Method of X-ray fluorescence (XRF) analysis
GOST 17261-2008 Zinc. Methods of atomic-emission spectral analysis
GOST 16274.1-1977 Bismuth. Method of spectrochemical analysis
GOST 12550.2-1982 Palladium-iridium alloys. Methods of spectrografic analysis
GOST 12552.2-1977 Platinum-nickel alloys. Method of spectral of analysis
GOST 12559.2-1982 Rlatinum-iridium alloys. Methods of spectrografic analysis
GOST 12560.2-1978 Palladium-silver-cobalt alloys. Method of spectral analysis
GOST 12561.2-1978 Palladium-silver-copper alloys. Method of spectral analysis
GOST 12564.2-1983 Aurrum-palladium-platinum alloys. Method of spectral analysis
GOST 25567-1982 Concentrated kaolin. Spectrum analysis method
GOST 27981.1-1988 Copper of high purity. Methods of atomic-spectral analysis
GOST 27981.1-2015 High purity copper. Method of atomic-spectral analysis
GOST 20997.0-1981 Thallium. General requirements for methods of spectral analysis
GOST R 54153-2010 Steel. Method of atomic emission spectral analysis
GOST 6012-2011 Nickel. Methods of chemical-atomic-emission spectral analysis
GOST 23201.0-1978 Alumina. General requirements for methods of spectral analysis
GOST 8776-2010 Cobalt. Methods of chemical-atomic-emission spectral analysis
GOST 6012-1978 Nickel. Methods of chemical-atomic-emission spectral analysis
GOST 27981.3-1988 Copper of high purity. Method of emission-spectral analysis with photoelectric registration of spectrum / Note: To be replaced by GOST 31382 (2009).
GOST 29103-1991 Tungsten, molibdenum. General requirements for methods of chemical and spectral analysis
GOST 20068.1-1979 Tinless bronze. Method of spectral analysis of metal standard specimens with spectrum photographic record
GOST 20068.2-1979 Tinless bronze. Method of spectral analysis of metal standard specimens with spectrum photo-electric record
GOST 9717.3-1982 Copper. Method of spectral analysis of oxide standart specimens
GOST 11884.15-1982 Tungsten concentrate. General requirements for methods of spectrum analysis
GOST 20068.3-1979 Tinless bronze. Method of spectral analysis of oxide standard specimens with spectrum photographic record
GOST 9717.1-1982 Copper. Method of spectral analysis of metal standart specimens with photoelectrical registration of spectrum / Note: To be replaced by GOST 31382 (2009).
GOST 30508-1997 Lead concentrates. Method of spectrum analysis
GOST 12645.8-1982 Indium. Method of chemical and spectral analysis for the determination of tin
GOST 16273.0-1985 Technical selenium. General requirements for method of spectral analysis
GOST 26473.13-1985 Vanadium base alloys and alloying elements. Method of spectral analysis

BR-ABNT, Spectral Analysis Spectral Inspection

ABNT P-EB-304-1969

ZA-SANS, Spectral Analysis Spectral Inspection

SANS 5567:1968 Spectrographic analysis of copper
SANS 62129:2008 Calibration of optical spectrum analyzers
SANS 11732:2006 Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection
SANS 61290-5-1:2007 Optical amplifiers - Test methods Part 5-1: Reflectance parameters - Optical spectrum analyzer method

Shanxi Provincial Standard of the People's Republic of China, Spectral Analysis Spectral Inspection

DB1404/T 18-2021 Inspection and testing laboratory instrument analysis method validation requirements Spectroscopy

Professional Standard - Education, Spectral Analysis Spectral Inspection

JY/T 0571-2020 General Rules of Fluorescence Spectroscopy Analysis Methods
JY/T 0566-2020 General rules for atomic fluorescence spectrometry
JY/T 0573-2020 General Rules of Laser Raman Spectroscopy Analysis Method
JY/T 002-1996 General Rules for Laser Raman Spectroscopy Analysis Methods
JY/T 0572-2020 General Rules for Analytical Methods of Circular Dichroism Spectroscopy
JY/T 0565-2020 General rules for electrothermal atomic absorption spectrometry

European Committee for Standardization (CEN), Spectral Analysis Spectral Inspection

CEN EN 62129-2006 Calibration of optical spectrum analyzers
CEN EN 62129-2006_ Calibration of optical spectrum analyzers
EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
PREN 14726-2003 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
EN 12019:1997 Zinc and Zinc Alloys - Optical Emission Spectrometric Analysis
CEN EN 14726-2005 Aluminium and aluminium alloys — Chemical analysis — Guideline for spark optical emission spectrometric analysis
DD ENV 12908-1997 Lead and lead alloys - Analysis by Optical Emission Spectrometry (OES) with spark excitation

Association Francaise de Normalisation, Spectral Analysis Spectral Inspection

NF C93-845:2006 Calibration of optical spectrum analyzers.
NF X11-672:1996 Particle size analysis. Photon correlation spectroscopy.
NF A06-840:1998 Zinc and zinc alloys. Optical emission spectrometric analysis.
NF A06-590:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis.
NF A07-510X2:1975 ANALYSIS OF NON-ALLOYED ALUMINIUM BY EMISSION SPECTROGRAPHY.
NF A07-510:1971 Analysis of non-alloyed aluminium by emission spectrography.
NF A07-515:1971 Analysis of aluminium copper alloys by emission spectrography.
NF A06-001:1979 Analysis of light metals by spectrography. Processing of test results. Statistical interpretation.
NF X21-061:2008 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution.
NF A07-500:1979 Analysis of aluminium and its alloys by emission spectrometry.
NF C93-805-5-1*NF EN 61290-5-1:2006 Optical amplifier test methods - Part 5-1 : reflectance parameters - Optical spectrum analyser method
NF EN 15079:2015 Cuivre et alliages de cuivre - Analyse par spectrométrie d'émission optique à étincelles (SEO-E)
NF EN ISO 11732:2005 Qualité de l'eau - Dosage de l'azote ammoniacal - Méthode par analyse en flux (CFA et FIA) et détection spectrométrique
NF X21-002:2007 Microbeam analysis - Electron probe microanalysis - Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy.
NF ISO 14707:2006 Analyse chimique des surfaces - Spectrométrie d'émission optique à décharge luminescente - Introduction à son emploi
NF EN ISO 23913:2009 Qualité de l'eau - Dosage du chrome(VI) - Méthode par analyse en flux (FIA et CFA) et détection spectrométrique
NF C93-805-3-1*NF EN 61290-3-1:2004 Optical amplifiers - Test methods - Part 3-1 : noise figure parameters - Optical spectrum analyzer method

Professional Standard - Electricity, Spectral Analysis Spectral Inspection

DL/T 386-2010 Calibration for second derivative flame atomic emission spectrometer
DL/T 991-2006 Spectral analysis guideline of metal for electrical power equipment

International Organization for Standardization (ISO), Spectral Analysis Spectral Inspection

ISO 13321:1996 Particle size analysis - Photon correlation spectroscopy
ISO 3815:1976 Zinc and zinc alloys; Spectrographic analysis
ISO 18516:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution
ISO 10810:2019 Surface chemical analysis — X-ray photoelectron spectroscopy — Guidelines for analysis
ISO 16962:2017 Surface chemical analysis - Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
ISO 16129:2012 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer

Standard Association of Australia （SAA）, Spectral Analysis Spectral Inspection

AS 4549.1:1999 Particle size analysis - Photon correlation spectroscopy
AS ISO 19319:2006 Surface chemical analysis - Augur electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution, analysis area and sample area viewed by the analyser
AS 2134.2:1999 Recommended practice for chemical analysis by atomic absorption spectrometry - Graphite furnace spectrometry

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Spectral Analysis Spectral Inspection

GB/T 19627-2005 Particle size analysis-Photon correlation spectroscopy
GB/T 5123-1985 Nickel--Method of spectral analysis
GB/T 5871-1986 Method for spectrographic analysis of aluminium and its alloys
GB/T 25481-2010 On-line ultraviolet/visible spectrum analyzer
GB/T 16599-1996 Methods for emission spectrum analysis of molybdenum
GB/T 16600-1996 Methods for emission spectrum analysis of tungsten
GB/T 9259-1988 Terminology of emission spectochemical analysis
GB/T 6040-2002 General rules for infrared analysis
GB/T 11170-1989 Method for photoelectric emission spectroscopic analysis of stainless steel
GB/Z 42520-2023 Guidelines for X-ray fluorescence spectrometric laboratory practice for the analysis of iron ores
GB/T 15337-1994 General rules for atomic absorption spectrometric analysis
GB/T 15337-2008 General rules for atomic absorption spectrometric analysis
GB/T 7999-2000 Standard method for direct reading spectromertric analysis of aluminum and its alloys
GB/T 42360-2023 Total Reflection X-ray Fluorescence Spectroscopic Analysis of Water for Surface Chemical Analysis
GB/T 14203-1993 General rule for photoelectric emission spectroscopic analysis of iron, steel and alloy
GB/T 26042-2010 Methods for analysis of zinc and zinc alloys.The optical emission spectrometry
GB/T 5678-1985 The method for sampling cast alloys for spectrochemical analysis
GB/T 5678-2013 Sampling methods of spectrochemical analysis for cast alloys
GB/T 32199-2015 Infrared Spectroscopy Qualitative Analysis Technique General Rules
GB/T 32198-2015 General Rules for Quantitative Analysis Techniques of Infrared Spectroscopy
GB/T 7999-2015 Optical emission spectrometric analysis method of aluminum and aluminum alloys
GB/T 7999-2007 Optical emission spectrometric analysis method of aluminum and aluminum alloys
GB/T 29858-2013 Standard guidelines for molecular spectroscopy multivariate calibration quantitative analysis
GB/T 16597-1996 Analytical methods of metallurgical products. General rule for X-ray fluorescence spectrometric methods
GB/T 19502-2004 Surface chemical analysis-Glow discharge optical emission spectrometry(GD-OSE)-Introduction to use
GB/T 19267.3-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 3:Molecular fluorospectrometry
GB/T 19267.3-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 3: Molecular fluorospectrometry
GB/T 30704-2014 Surface chemical analysis.X-ray photoelectron spectroscopy.Guidelines for analysis
GB/T 19500-2004 General rules for X-ray photoelectron spectroscopic analysis method
GB/T 12689.9-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of antimony content-The atomic fluorescence spectrometer and the flame atomic absorption spectrometric method

German Institute for Standardization, Spectral Analysis Spectral Inspection

DIN ISO 13321:2004 Particle size analysis - Photon correlation spectroscopy (ISO 13321:1996)
DIN 51820-1:1989 Testing of lubricants; analysis of greases by infrared spectrometry; taking and evaluating an infrared spectrum
DIN 51009:2013-11 Optical atomic spectral analysis - Principles and definitions
DIN 51009:2013 Optical atomic spectral analysis - Principles and definitions
DIN EN 62129:2007 Calibration of optical spectrum analyzers (IEC 62129:2006); German version EN 62129:2006
DIN 51009:2001 Optical atomic spectral analysis - Principles and definitions
DIN 51820:2013 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum
DIN 58141-2:1989 Testing of fibre optic elements; determination of spectral transmittance of light guides
DIN 3761-14:1984 Rotary shaft lip type seals for automobils; test; infrared-spectroscopic analysis of elastomers
DIN EN 61290-5-1:2007 Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method (IEC 61290-5-1:2006); German version EN 61290-5-1:2006
DIN 51820:2013-12 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum / Note: Applies in conjunction with DIN 51451 (2004-09).
DIN EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis; English version of DIN EN 14726:2005
DIN EN 15079:2015-07 Copper and copper alloys - Analysis by spark optical emission spectrometry (S-OES); German version EN 15079:2015
DIN EN ISO 11732:2005 Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005); German version EN ISO 11732:2005
DIN 51451:2004 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
DIN EN 61290-3-1:2004 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method (IEC 61290-3-1:2003); German version EN 61290-3-1:2003

British Standards Institution (BSI), Spectral Analysis Spectral Inspection

BS EN 62129:2006 Calibration of optical spectrum analyzers
BS EN 12019:1998 Zinc and Zinc Alloys - Optical Emission Spectrometric Analysis
BS EN 61290-5-1:2006 Optical amplifiers - Test methods - Reflectance parameters - Optical spectrum analyzer method
BS EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments. Optical spectrum analyzers
BS EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
BS ISO 18516:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution
BS DD ISO/TS 25138:2011 Surface chemical analysis. Analysis of metal oxide films by glow-discharge optical-emission spectrometry
BS ISO 13424:2013 Surface chemical analysis. X-ray photoelectron spectroscopy. Reporting of results of thin-film analysis
BS ISO 14707:2015 Surface chemical analysis. Glow discharge optical emission spectrometry (GD-OES). Introduction to use
BS ISO 14707:2000 Surface chemical analysis - Glow discharge optical emission spectrometry (GD-OES) - Introduction to use
BS EN 61290-10-2:2009 Optical amplifiers. Test methods. Multichannel parameters. Pulse method using a gated optical spectrum analyzer
BS EN 61290-3-2:2009 Optical amplifiers. Test methods. Noise figure parameters. Electrical spectrum analyzer method
BS EN 61290-10-2:2008 Optical amplifiers – Test methods — Part 10-2: Multichannel parameters – Pulse method using a gated optical spectrum analyzer
BS EN 61290-3-2:2008 Optical amplifiers - Test methods - Noise figure parameters - Electrical spectrum analyzer method
PD ISO/TS 15338:2020 Surface chemical analysis. Glow discharge mass spectrometry. Operating procedures
BS ISO 16962:2017 Surface chemical analysis. Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
BS ISO 16129:2012 Surface chemical analysis. X-ray photoelectron spectroscopy. Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer

Professional Standard - Electron, Spectral Analysis Spectral Inspection

SJ 2656-1986 Mothod of tungsten spectral analysis
SJ 2657-1986 Mothod of molybdeuum spectral analysis
SJ/Z 3206.1-1989 General requirements for laboratories involved with determination of emision spectrum
SJ/Z 3206.10-1989 General rules for analysis of properties of emision spectrum
SJ/Z 3206.11-1989 General rules for analysis of quantities of emision spectrum
SJ/Z 1544-1979 Method for spectral analysis of Nickel-- Tungsten-Magnesium alloy
SJ/Z 3206.7-1989 Geneeral rules for preparation and sampling sample for emission spectrum analysis
SJ/Z 3206.14-1989 General rules for error in spectrum chemical analysis and data processing in laboratories

Professional Standard - Non-ferrous Metal, Spectral Analysis Spectral Inspection

YS/T 82-2006 Basis platinum as spectral analysis
YS/T 83-2006 Basis palladium as spectral analysis
YS/T 84-2006 Basis iridum as spectral analysis
YS/T 85-2006 Basis rhodium as spectral analysis
YS/T 82-1994 Platinum substrates for spectroscopic analysis
YS/T 83-1994 Palladium Matrix for Spectroscopic Analysis
YS/T 84-1994 Iridium matrix for spectroscopic analysis
YS/T 85-1994 Rhodium Matrix for Spectroscopic Analysis
YS/T 631-2007 Methods for analysis of zinc.The optical emission spectrometry
YS/T 558-2009 Methods for emission spectrum analysis of molybdenum
YS/T 559-2009 Methods for emission spectrum analysis of tungsten
YS/T 558-2006 Molybdenum Emission Spectroscopy Analysis Method
YS/T 559-2006 Tungsten Emission Spectroscopy Analysis Method
YS/T 464-2003 Methods for analytical of copper cathode-The optical emission spectrometry
YS/T 482-2005 Methods for analysis of copper and copper alloys-The atomic emission spectrometry
YS/T 1036-2015 Test method of optical emission spectrometric analysis of magnesium rare earth alloys
YS/T 536.7-2009 Methods for chemical analysis of bismuth.Determination of arsenic content.Atomic fluorescence spectrometric method
YS/T 536.11-2009 Methods for chemical analysis of bismuth.Determination of mercury content.Atomic fluorescence spectrometric method
YS/T 361-2006 Determination of trace impurities in purity platinum by atomic emission spectrometric
YS/T 362-2006 Determination of trace impurities in purity palladium by atomic emission spectrometric
YS/T 363-2006 Determination of trace impurities in purity rhodium by atomic emission spectrometric
YS/T 364-2006 Determination of trace impurities in purity iridium by atomic emission spectrometric
YS/T 361-1994 Emission Spectral Analysis of Impurity Elements in Pure Platinum
YS/T 362-1994 Emission spectrum analysis of impurity elements in pure palladium
YS/T 363-1994 Emission spectrum analysis of impurity elements in pure rhodium
YS/T 364-1994 Emission Spectral Analysis of Impurity Elements in Pure Iridium

International Electrotechnical Commission (IEC), Spectral Analysis Spectral Inspection

IEC PAS 62129:2004 Calibration of optical spectrum analyzers
IEC 62129:2006 Calibration of optical spectrum analyzers
IEC 61290-5-1:2006 Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyser method
IEC 61290-3-1:2003 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters; Optical spectrum analyzer method
IEC 61290-1-1:2020 RLV Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method

Danish Standards Foundation, Spectral Analysis Spectral Inspection

DS/EN 62129/Corr. 1:2007 Calibration of optical spectrum analyzers
DS/EN 62129:2006 Calibration of optical spectrum analyzers
DS/EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
DS/EN 15079:2007 Copper and copper alloys - Analysis by spark source optical emission spectrometry (S-OES)
DS/ENV 12908:1998 Lead and lead alloys - Analysis by optical emission spectrometry (OES) with spark excitation
DS/EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis

IN-BIS, Spectral Analysis Spectral Inspection

Japanese Industrial Standards Committee (JISC), Spectral Analysis Spectral Inspection

JIS C 6192:2008 Calibration of optical spectrum analyzers
JIS C 6183-1:2019 Optical spectrum analyzers -- Part 1: Test methods
JIS G 1256:1997 Iron and steel -- Method for X-ray fluorescence spectrometric analysis
JIS M 8205:2000 Iron ores -- X-ray fluorescence spectrometric analysis
JIS H 1123:2021 Method for photoelectric emission spectrochemical analysis of lead metal
JIS C 6183:1992 Test methods of fiber-optic spectrum analyzer
JIS H 1691:1968 Method for spectrochemical analysis of tantalum
JIS H 1183:2007 Method for emission spectrochemical analysis of silver bullion
JIS H 1305:2005 Method for optical emission spectrochemical analysis of aluminium and aluminium alloys
JIS R 2216:2005 Methods for X-ray fluorescence spectrometric analysis of refractory products
JIS H 1123:1995 Method for photoelectric emission spectrochemical analysis of lead metal
JIS H 1631:2008 Titanium alloys -- Method for X-ray fluorescence spectrometric analysis
JIS G 1256 AMD 1:2010 Iron and steel -- Method for X-ray fluorescence spectrometric analysis (Amendment 1)
JIS G 1351:2006 Ferroalloys -- Method of X-ray fluorescence spectrometric analysis
JIS H 1630:1995 Method for atomic emission spectrometric analysis of titanium
JIS H 1683:2002 Tantalum -- Method for atomic absorption spectrometric analysis
JIS H 1630:1975 Method for atomic emission spectrometric analysis of titanium
JIS Z 8826:2005 Particle size analysis -- Photon correlation spectroscopy
JIS H 1163:1991 Method for photoelectric emission spectrochemical analysis of cadmium metal
JIS H 1292:1997 Method for X-ray fluorescence spectrometric analysis of copper and copper alloys
JIS H 1287:2015 Nickel and nickel alloys -- Methods for X-ray fluorescence spectrometric analysis
JIS G 1256 AMD 2:2013 Iron and steel.Method for X-ray fluorescence spectrometric analysis (Amendment 2)
JIS H 1113:2022 Method for photoelectric emission spectrochemical analysis of zinc metal
JIS G 1202:1975 General rules on emission-spectroscopic analysis for iron and steel
JIS G 1257:1994 Iron and steel -- Methods for atomic absorption spectrometric analysis
JIS K 0214:2006 Technical terms for analytical chemistry (Chromatography part)
JIS K 0214:2013 Technical terms for analytical chemistry (Chromatography part)
JIS H 1669:1990 Method for X-ray fluorescence spectrometric analysis of zirconium alloys
JIS H 1103:1995 Method for photoelectric emission spectrochemical analysis of electrolytic cathode copper
JIS H 1560:2016 Method for photoelectric emission spectrochemical analysis of die casting zinc alloys
JIS G 1351:1987 Method for X-ray fluorescence spectrometric analysis of ferroalloys
JIS H 1303:1976 Method for emission spectrochemical analysis of aluminium ingot
JIS H 1322:1976 Method for emission spectrochemical analysis of magnesium ingot
JIS H 1305:1976 Method for photoelectric emission spectrochemical analysis of aluminium and aluminium alloy
JIS R 2216:1995 Method for X-ray fluorescence spectrometric analysis of refractory bricks and refractory mortars
JIS Z 2611:1977 General rules for photoelectric emission spectrochemical analysis of metal materials
JIS H 1183 AMD 1:2012 Method for emission spectrochemical analysis of silver bullion (Amendment 1)
JIS G 1251:1976 Emission-spectroscopic analysis for pig iron and cast iron

工业和信息化部, Spectral Analysis Spectral Inspection

YS/T 84-2020 Iridium matrix for spectroscopic analysis
YS/T 82-2020 Platinum matrix for spectroscopic analysis
YS/T 83-2020 Palladium matrix for spectroscopic analysis
YS/T 85-2020 Rhodium matrix for spectroscopic analysis
YS/T 464-2019 Direct reading spectroscopic analysis method of copper cathode

GOSTR, Spectral Analysis Spectral Inspection

GOST 9716.2-1979 Copper-zinc alloys. Method spectral analysis of metal standard spesimens with photoelectric registration of spectrum
GOST 9717.2-2018 Copper. Method of spectral analysis by metal standard specimens with photographic registration of spectrum
GOST 9716.3-1979 Copper-zinc alloys. Method of spectral analysis of oxide spesimens with photographic registration of spectrum
GOST 9716.1-1979 Copper-zinc alloys. Method of spectral analysis of metal standard spesimens with photographic registration of spectrum
GOST 9717.3-2018 Copper. Method of spectral analysis by oxide standard specimens

CEN - European Committee for Standardization, Spectral Analysis Spectral Inspection

EN 14726:2019 Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry
EN ISO 11732:1997 Water Quality - Determination of Ammonium Nitrogen by Flow Analysis (CFA and FIA) and Spectrometric Detection

Professional Standard - Ferrous Metallurgy, Spectral Analysis Spectral Inspection

YB/T 4177-2008 Determination of chemical composition in stag by X-ray fluorescence spectrometry
YB/T 4142-2006 Statistical rules for processing spectral analysis data

国家市场监督管理总局、中国国家标准化管理委员会, Spectral Analysis Spectral Inspection

GB/T 6040-2019 General rules for infrared analysis
GB/T 39540-2020 Fast determination of shale gas composition—Laser Raman spectroscopy
GB/T 41072-2021 Surface chemical analysis—Electron spectroscopies—Guidelines for ultraviolet photoelectron spectroscopy analysis
GB/T 37969-2019 Standard guidelines for near infrared qualitative analysis
GB/T 16597-2019 Analytical methods of metallurgical products—General rule for X-ray fluorescence spectrometric methods

Professional Standard - Commodity Inspection, Spectral Analysis Spectral Inspection

SN/T 2785-2011 Photoelectric Emission Spectroscopic Analysis of Zinc and Zinc Alloys
SN/T 2786-2011 Photoelectric Emission Spectroscopic Analysis of Magnesium and Magnesium Alloys
SN/T 3914-2014 General rules for infrared spectrometer in minerals
SN/T 2079-2008 Method for analysis of stainless and alloy steels.X-ray fluorescence spectrometry

Professional Standard - Agriculture, Spectral Analysis Spectral Inspection

SN/T 5566-2023 General Rules of Laser Micro Raman Spectroscopy Analysis Method
水产品质量安全检验手册 1.2.4.4-2005 Chapter 1 General Introduction Section 2 Analytical Methods for Aquatic Product Inspection 4. Physicochemical Analysis (4) Atomic Fluorescence Spectrometry

American Society for Testing and Materials (ASTM), Spectral Analysis Spectral Inspection

ASTM C791-83(2000) Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
ASTM E996-94(1999) Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
ASTM E718-80 Method for Spectrographic Analysis of Cartridge Brass
ASTM E168-92 Standard Practice for General Techniques of Infrared Quantitative Analysis
ASTM E1097-97 Standard Guide for Direct Current Plasma Emission Spectrometry Analysis
ASTM E10-08 Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E10-15 Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E1999-99e1 Standard Test Method for Analysis of Cast Iron Using Optical Emission Spectrometry
ASTM E1999-99(2004) Standard Test Method for Analysis of Cast Iron Using Optical Emission Spectrometry
ASTM E539-11 Standard Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry
ASTM E1085-09 Standard Test Method for Analysis of Low-Alloy Steels by X-Ray Fluorescence Spectrometry
ASTM E2465-19 Standard Test Method for Analysis of Ni-Base Alloys by X-ray Fluorescence Spectrometry
ASTM D5381-93(2003) Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders
ASTM D5381-93(1998) Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders
ASTM C791-19 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
ASTM C696-11 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
ASTM E1621-21 Standard Guide for X-Ray Emission Spectrometric Analysis
ASTM E1621-05 Standard Guide for X-Ray Emission Spectrometric Analysis
ASTM C791-12 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
ASTM E1085-95(2004) Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels
ASTM E1085-95(2000) Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels
ASTM E1085-95(2004)e1 Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels
ASTM E415-99a(2005) Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel
ASTM E415-08 Standard Test Method for Atomic Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel
ASTM E716-94(2002) Standard Practices for Sampling Aluminum and Aluminum Alloys for Spectrochemical Analysis
ASTM E716-16(2021)e2 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
ASTM E1329-00 Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis
ASTM E1329-00(2005) Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis
ASTM D8431-22 Standard Test Method for Detection of Water-soluble Petroleum Oils by A-TEEM Optical Spectroscopy and Multivariate Analysis
ASTM E572-94(2000) Standard Test Method for X-Ray Emission Spectrometric Analysis of Stainless Steel
ASTM E572-02a(2006)e1 Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
ASTM E572-02a(2006) Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
ASTM E572-02a Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
ASTM C1271-99(2006) Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
ASTM E572-94(2000)e1 Standard Test Method for X-Ray Emission Spectrometric Analysis of Stainless Steel

Guangdong Provincial Standard of the People's Republic of China, Spectral Analysis Spectral Inspection

DB44/T 1602-2015 Analysis Method of Stone Composition--X-ray Fluorescence Spectrometry

Shaanxi Provincial Standard of the People's Republic of China, Spectral Analysis Spectral Inspection

DB61/T 1161-2018 Natural Gas Composition Analysis Laser Raman Spectroscopy Marshal

国家能源局, Spectral Analysis Spectral Inspection

SY/T 7433-2018 Composition analysis of natural gas using laser Raman spectroscopy
SY/T 7662-2022 Laser Raman spectroscopy analysis method of solid organic matter and inclusions
SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)

BE-NBN, Spectral Analysis Spectral Inspection

NBN P 32-015-1977 zinc and zinc alloys - Spectrographic analysis

The American Road & Transportation Builders Association, Spectral Analysis Spectral Inspection

AASHTO DIVISION I-A 4.4 Single Mode Spectral Analysis Method - Procedure 2

Lithuanian Standards Office , Spectral Analysis Spectral Inspection

LST EN 62129-2006 Calibration of optical spectrum analyzers (IEC 62129:2006)
LST EN 62129-2006/AC-2007 Calibration of optical spectrum analyzers (IEC 62129:2006)
LST EN 14726-2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
LST EN 15079-2007 Copper and copper alloys - Analysis by spark source optical emission spectrometry (S-OES)
LST L ENV 12908-2000 Lead and lead alloys - Analysis by Optical Emission Spectrometry (OES) with spark excitation
LST EN 14242-2005 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis

AASHTO - American Association of State Highway and Transportation Officials, Spectral Analysis Spectral Inspection

DIVISION I-A 4.5-1996 Multimode Spectral Analysis Method - Procedure 3

AENOR, Spectral Analysis Spectral Inspection

UNE-EN 14726:2006 Aluminum and aluminium alloys. Chemical analysis. Guideline for spark optical emission spectometric analysis

CZ-CSN, Spectral Analysis Spectral Inspection

CSN 42 0600 Cast.5-1975 Antimony of high purity. Methods of chemical and spectral analysis. Dctermination of silver, bismuth. copper, iron. nickel, lead. and tin by spectral method
CSN 42 0600 Cast.3-1975 Antimony of high parity. Methods of chemical and spectral analysis. Delermmation of arsenic by photomotric metod
CSN 42 1211-1986 The sampling of technical iron for spectrometric and chemical analysis
CSN 42 0600 Cast.2-1975 Antimony of high purity. Methods of chemical and spectral analysis. Preparation of the sample

Professional Standard - Public Safety Standards, Spectral Analysis Spectral Inspection

GA/T 1655-2019 Forensic Science Soil Elemental Composition Examination X-ray Fluorescence Spectroscopy
GA/T 1656-2019 Forensic Science Lipstick Test Infrared Spectroscopy
GA/T 1701-2019 Forensic Science Toner Inspection Infrared Spectroscopy
GA/T 1995-2022 Forensic Science Metal Examination Wavelength Dispersive X-ray Fluorescence Spectrometry

IEC - International Electrotechnical Commission, Spectral Analysis Spectral Inspection

PAS 62129-2004 Calibration of optical spectrum analyzers (Edition 1.0;: 2006)

Professional Standard - Chemical Industry, Spectral Analysis Spectral Inspection

HG/T 2954~2955-2008 Standard writing format for atomic absorption spectroscopic analysis method Standard writing format for molecular absorption spectroscopic analysis method

司法部, Spectral Analysis Spectral Inspection

SF/T 0080-2020 Laser microscopy Raman spectroscopy for comparative testing of single fibers

North Atlantic Treaty Organization Standards Agency, Spectral Analysis Spectral Inspection

STANAG 7017-1994 SPECTROMETRIC ANALYSIS OF AIRCRAFT ENGINE LUBRICANTS

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Spectral Analysis Spectral Inspection

GB/T 32996-2016 Surface chemical analysis—Analysis of metal oxide films by glow-discharge optical emission spectrometry

(U.S.) Ford Automotive Standards, Spectral Analysis Spectral Inspection

FORD FLTM EU-AJ 051-01-2000 METHOD OF CARBON TYPE ANALYSIS OF LUBRICATING OILS BY INFRARED SPECTROSCOPY

ES-UNE, Spectral Analysis Spectral Inspection

UNE-EN 15079:2015 Copper and copper alloys - Analysis by spark optical emission spectrometry (S-OES)

Group Standards of the People's Republic of China, Spectral Analysis Spectral Inspection

T/CSTM 00011E-2021 General rules for original position statistic distribution analysis by laser induced breakdown spectroscopy
T/CSTM 00011-2017 General Rules for In Situ Statistical Distribution Analysis Method of Laser Induced Breakdown Spectroscopy
T/CSTM 00964-2022 General rules for performance evaluation of atomic spectrometer

National Metrological Technical Specifications of the People's Republic of China, Spectral Analysis Spectral Inspection

JJF 1133-2005 Calibration Specification of Gold Gauge Utilizing X-ray Fluorescence Spectrometry

KR-KS, Spectral Analysis Spectral Inspection

KS D ISO 14707-2003(2023)
KS D 1658-2003(2016)(英文版) Emission-spectroscopic analysis for carbon steel and low alloy steel

NL-NEN, Spectral Analysis Spectral Inspection

NEN 6302-1980 Test methods for vegetable and animal oils and fats - Preparation of methyl esters for gaschromatography and infrared spectrophotometry

VN-TCVN, Spectral Analysis Spectral Inspection

TCVN 6061-2009 Beer.Determination of colour by spectrophotometric method

Indonesia Standards, Spectral Analysis Spectral Inspection

SNI 06-6596-2001 Water treatment for metal analysis by atomic absorption spectrophotometers
SNI 13-4694-1998 Composition analysis of coal ash by atomic absorption spectrometry

AT-ON, Spectral Analysis Spectral Inspection

ONORM M 6238 Teil.1-1986 Water analysis; determination ofnitrate; 2,6-dimethylphenol spectrometric method

Professional Standard - Forestry, Spectral Analysis Spectral Inspection

LY/T 2053-2012 Standard method for near infrared qualitative analysis of Wood
LY/T2053-2012 Standard method for mear infrarde qualitative analysis of wood

Professional Standard - Energy, Spectral Analysis Spectral Inspection

NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)

Professional Standard - Aviation, Spectral Analysis Spectral Inspection

HB 6731.1-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 1:Determination of copper content by flame atomic absorption spectrometric method
HB 6731.2-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 2:Determination of magnesium content by flame atomic absorption spectrometric method
HB 6731.3-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 1:Determination of zinc content by flame atomic absorption spectrometric method
HB 6731.4-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 4:Determination of lead content by flame atomic absorption spectrometric method
HB 6731.5-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 5:Determination of cadmium content by flame atomic absorption spectrometric method
HB 6731.6-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 6:Determination of iron content by flame atomic absorption spectrometric method
HB 6731.7-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 7:Determination of manganese content by flame atomic absorption spectrometric method
HB 6731.8-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 8:Determination of nickel content by flame atomic absorption spectrometric method