ZH
RU
ES

The development of thermal analysis

The development of thermal analysis, Total:499 items.

In the international standard classification, The development of thermal analysis involves: Company organization and management, Surface treatment and coating, Testing of metals, Gas and steam turbines. Steam engines, Soil quality. Pedology, Analytical chemistry, Non-ferrous metals, Natural gas, Test conditions and procedures in general, Raw materials for rubber and plastics, Biology. Botany. Zoology, Road engineering, Ceramics, Lubricants, industrial oils and related products, Applications of information technology, Fuels, Rubber, Telecommunication systems, Installations in buildings, Thermodynamics and temperature measurements, Protection against fire, Food products in general, Jewellery, Petroleum products in general, Vocabularies, Power stations in general, Materials for the reinforcement of composites, Rubber and plastics products, Mechanical testing, Aerospace engines and propulsion systems, Kitchen equipment, Pesticides and other agrochemicals, CHEMICAL TECHNOLOGY, Inorganic chemicals, Iron and steel products, Electronic components in general, Ferrous metals, Radiation measurements, Ferroalloys, Plastics, Products of the chemical industry, Insulating fluids, Road vehicle systems, Products of non-ferrous metals, Technical drawings, Air quality, General methods of tests and analysis for food products, Leather technology, Ergonomics, Water quality, Coals, Physics. Chemistry, Elements of buildings, Heat pumps, Construction materials, Quality, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Acoustics and acoustic measurements, Ventilators. Fans. Air-conditioners, Prepackaged and prepared foods, Road vehicles in general, Services, Graphical symbols, Animal feeding stuffs, Veterinary medicine, Farming and forestry.

Association of German Mechanical Engineers, The development of thermal analysis

VDI 3822 Blatt 1.6-2010 Failure analysis - Liquid metal induced crack growth by hot dip galvanising
VDI 2014 Blatt 3-2006 Development of Fibre-Reinforced Plastics components - Analysis
VDI 3822 Blatt 1.4-2011 Failure analysis - Failures caused by thermal loading

International Electrotechnical Commission (IEC), The development of thermal analysis

IEC TR 63388:2021 Report on the development of cogeneration

ACI - American Concrete Institute, The development of thermal analysis

ACI SP-287 CD-2012 Recent Development in Reinforced Concrete Slab Analysis@ Design@ and Serviceability

CN-STDBOOK, The development of thermal analysis

图书 3-9090 Review of Analytical Testing Instruments--Viewing the Progress of Analytical Technology from BCEIA2017 Instrument Exhibition

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., The development of thermal analysis

ASHRAE 4289-1999 Domestic Hot Water Consumption of the Developed and Developing Communities in South Africa
ASHRAE CH-95-8-1995 Advances in Fenestration: Analysis and Testing
ASHRAE NO-94-14-1994 Advances in Fenestration Analysis and Testing
ASHRAE LV-11-C026-2011 Rate of Heating Analysis of Data Centers during Power Shutdown
ASHRAE 4280-1999 Development of Rating Correlations for R-134a Flowing Through Adiabatic Capillary Tubes
ASHRAE OR-94-10-1994 Advances in Enhanced Heat and Mass Transfer in Heat Exchangers - Part II
ASHRAE OR-94-7-1994 Advances in Enhanced Heat and Mass Transfer in Heat Exchangers@ Part 1
ASHRAE 4364-2000 Development of an In-Situ System and Analysis Procedure for Measuring Ground Thermal Properties
ASHRAE 4222-1999 Analysis of Transfer Pumping Interfaces for Stratified Chilled Water Thermal Storage Systems - Part 1: Model Development
ASHRAE SF-98-27-2-1998 Analytical Model for Hot-Gas Defrosting of a Cylindrical Coil Cooler: Part I - Model Development
ASHRAE 4389-2000 Parametric Analysis and Development of a Design Tool for Foundation Heat Gain for Coolers (RP-953)
ASHRAE AT-96-13-1996 Advances in Measurement and Evaluation of Thermal Distribution System Efficiency
ASHRAE SF-98-19-1998 Symposium on Current Advances in the Design@ Test@ and Application of Gas Engine-Driven Heat Pumps
ASHRAE AT-01-9-4-2001 Thermoeconomic Analysis of Absorption Heat Transformers
ASHRAE AC-02-15-4-2002 Development of Deemed Energy and Demand Savings for Residential Ground-Source Heat Pump Retrofits in the State of Texas
ASHRAE CH-03-7-2003 Symposium on Advances and Issues in Residential Thermal Distribution Efficiency
ASHRAE KC-03-1-2003 Symposium on Advances and Issues in Residential Thermal Distribution Efficiency
ASHRAE 4068-1997 Sensitivity Analysis for Building Thermal Loads
ASHRAE DA-00-12-1-2000 Simplified Analysis of Building Thermal Storage Effects
ASHRAE SF-98-31-3-1998 New Hot Water Consumption Analysis and Water-Heating System Sizing Methodology
ASHRAE 4596-2002 The Development of Typical Weather Years for International Locations: Part II@ Production (RP-1015)
ASHRAE 4588-2002 The Development of Typical Weather Years for International Locations: Part I@ Algorithms (RP-1015)
ASHRAE LV-11-C001-2011 New Analytical and Numerical Solutions for the Short-term Analysis of Vertical Ground Heat Exchangers
ASHRAE CH-95-14-1995 Advances in Heat Transfer and Pressure Drop Characteristics of Alternative Refrigerants - Part II
ASHRAE CH-95-12-1995 Advances in Heat Transfer and Pressure Drop Characteristics of Alternative Refrigerants - Part 1
ASHRAE ST-16-017-2016 Performance Analysis of a Ground-Source Heat Pump System Using Mine Water as Heat Sink and Source
ASHRAE 4252-1999 Heat Transfer Analysis of Air-to-Carbon Dioxide Two-Phase Heat Absorption and Supercritical Heat Rejection
ASHRAE 3896-1995 Analysis of Deep Basement Heat Loss by Measurements and Calculations
ASHRAE CI-01-4-1-2001 Three-Dimensional Thermal-Hydraulic Analysis in Convex Louver Finned_Tube Heat Exchangers
ASHRAE AN-04-6-3-2004 Calorimetric Analysis of the Solar and Thermal Performance of Windows with Interior Louvered Blinds
ASHRAE 4323-2000 Comparison of Binary Mixture Heat and Mass Transfer Analysis with Single-Component Heat and Mass Transfer Analysis in the Design of GAX Absorber/Desorber
ASHRAE AT-01-9-1-2001 Thermoeconomic Analysis of Absorption Systems for Cooling
ASHRAE PH-97-5-6-1997 Analysis of Coupled Heat and Moisture Transfer in Buildings Considering the Influence of Radiant Heat Transfer
ASHRAE 3823-1994 Unsteady-State Thermal Analysis of a Large Space with Vertical Temperature Distribution
ASHRAE AN-04-8-1-2004 A Bin Method Energy Analysis for Ground-Coupled Heat Pumps (RP-1217)
ASHRAE 4388-2000 Economic Analysis of Foundation Heat Gain for Refrigerated Warehouses (RP-953)
ASHRAE 4630-2003 Performance Analysis of Axial Fans in Residential Heat Pump Systems
ASHRAE 4669-2004 Thermal Analysis of Solar-Powered Continuous Adsorption Air-Conditioning System
ASHRAE AT-01-10-4-2001 A Simplified Analysis of Radiant Heat Loss Through Projecting Fenestration Products
ASHRAE AT-01-9-2001 Thermoeconcmics and Second Law Analysis of HVAC&R Systems

American Society for Testing and Materials (ASTM), The development of thermal analysis

ASTM E3340-22 Standard Guide for Development of Laser Diffraction Particle Size Analysis Methods for Powder Materials
ASTM E2008-08(2014)e1 Standard Test Methods for Volatility Rate by Thermogravimetry
ASTM E2008-17(2021) Standard Test Methods for Volatility Rate by Thermogravimetry
ASTM E2008-07 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E2008-08 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E2008-99 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E2008-04 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E2008-06 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM D6375-09 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM C1558-16 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
ASTM E1131-98 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM D6370-23 Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)
ASTM E3142-18a(2023) Standard Test Method for Thermal Lag of Thermal Analysis Apparatus
ASTM E1131-20 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM D6375-99a Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6375-05 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM E2551-18 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E2551-20 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM D6375-09(2019) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6375-09(2014) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer 40;TGA41; Noack Method
ASTM E2550-17 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E3142-18 Standard Test Method for Thermal Lag of Thermal Analysis Apparatus
ASTM E473-06 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-06a Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E3142-18a Standard Test Method for Thermal Lag of Thermal Analysis Apparatus
ASTM E967-97 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E473-03 Standard Terminology Relating to Thermal Analysis
ASTM E473-04 Standard Terminology Relating to Thermal Analysis
ASTM E473-99 Standard Terminology Relating to Thermal Analysis
ASTM E473-00 Standard Terminology Relating to Thermal Analysis
ASTM E473-09 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-21 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-07b Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-08 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-22d Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E1131-08(2014) Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E1131-03 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM D8474-23 Standard Test Method for Recovered Carbon Black (rCB)—Compositional Analysis by Thermogravimetry (TGA)
ASTM D6382/D6382M-99(2022) Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
ASTM D6370-99(2009) Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)
ASTM D6370-99 Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)
ASTM E472-86(1991)e1 Practice for Reporting Thermoanalytical Data
ASTM F1519-98 Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
ASTM F1519-98(2003) Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
ASTM E2043-99(2021) Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM E2043-99(2017) Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM F1519-98(2008) Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
ASTM E2043-99(2012) Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM E2105-00(2005) Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
ASTM E2105-00 Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
ASTM D6370-99(2019) Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)
ASTM E2551-07 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E2551-13 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM F1519-98(2019) Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
ASTM E2043-99(2006) Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM E2043-99 Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM E2105-00(2010) Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
ASTM E1953-05 Standard Practice for Description of Thermal Analysis Apparatus
ASTM E1953-98 Standard Practice for Description of Thermal Analysis Apparatus
ASTM E1953-02 Standard Practice for Description of Thermal Analysis Apparatus
ASTM E2550-07 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E2550-11 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E2082-00 Standard Guide for Descriptive Analysis of Shampoo Performance
ASTM E2082-06 Standard Guide for Descriptive Analysis of Shampoo Performance
ASTM E2082-12 Standard Guide for Descriptive Analysis of Shampoo Performance
ASTM E2206-02 Standard Method for Force Calibration Of Thermomechnical Analyzers
ASTM D8339-20 Standard Test Method for The Analysis of Flue Gas Desulfurization Solids by Macro Thermogravimetric Analysis
ASTM D8474-22 Standard Test Method for Recovered Carbon Black (rCB)—Compositional Analysis by Thermogravimetry (TGA)
ASTM D3418-99 Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry
ASTM E2550-21 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM D3418-15 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D4902-99(2009) Standard Test Method for Evaporation and Drying of Analytical Solutions
ASTM E1582-93 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM E1953-20 Standard Practice for Description of Thermal Analysis and Rheology Apparatus
ASTM E473-14 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-16 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM F1519-98(2014) Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
ASTM E2744-16e1 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E1601-12 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM D4902-99(2020) Standard Test Method for Evaporation and Drying of Analytical Solutions
ASTM D4902-99(2016) Standard Test Method for Evaporation and Drying of Analytical Solutions
ASTM E1184-02 Standard Practice for Electrothermal (Graphite Furnace) Atomic Absorption Analysis
ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM D7582-12 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM D7582-15 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM D7582-10 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM E473-22b Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-22a Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E2161-01 Standard Terminology Relating to Performance Validation in Thermal Analysis
ASTM E2161-06 Standard Terminology Relating to Performance Validation in Thermal Analysis
ASTM E2161-06a Standard Terminology Relating to Performance Validation in Thermal Analysis
ASTM E473-22c Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E2744-10 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E1363-97e1 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E2161-08 Standard Terminology Relating to Performance Validation in Thermal Analysis
ASTM E473-07 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-21a Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-22 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-11 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-11a Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-05 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E2744-21 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2744-10(2015) Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2744-16 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E473-18 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-23a Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-23 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-23b Standard Terminology Relating to Thermal Analysis and Rheology
ASTM D7582-09 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM E1636-04 Standard Practice for Analytically Describing Sputter-Depth-Profile Interface Data by an Extended Logistic Function
ASTM E537-98 Standard Test Method for Assessing the Thermal Stability of Chemicals By Methods of Thermal Analysis
ASTM C1872-18e1 Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement
ASTM C1872-18 Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement
ASTM E1582-17 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM C1872-18e2 Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement
ASTM E1970-06 Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM E1131-08 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E831-13 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E2206-06 Standard Test Method for Force Calibration Of Thermomechnical Analyzers
ASTM E1970-00 Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM E1970-01 Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM E2206-11 Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E2206-21 Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E1970-23 Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM E1970-16(2021) Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM E2040-19 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E1970-16 Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM E2206-11(2015) Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E2113-09 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E2161-13 Standard Terminology Relating to Performance Validation in Thermal Analysis
ASTM E1582-21 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM E831-12 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis

RU-GOST R, The development of thermal analysis

GOST R 56157-2014 Soil. Procedures (methods) of analysis of composition and properties of soil samples. General requirements for development
GOST 32334-2013 Lubricating oils. Determination of evaporation loss of by thermogravimetric analyzer (TGA) Noack method
GOST R 54335-2011 Palladium. Method of spark atomic-emission analysis
GOST 28353.2-1989 Silver. Method of atomic-emission analysis with inductive plasma
GOST R 56721-2015 Plastics. Thermogravimetry of polymers. Part 1. General principles
GOST 31987-2012 Public catering. Technological instructions of products of catering. General requirements for lay out development and composition
GOST R ISO 16017-1-2007 Indoor, ambient and workplace air. Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/cappilary gas chromatography. Part 1. Pumped sampling
GOST R ISO 16017-2-2007 Indoor, ambient and workplace air. Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/cappilary gas chromatography. Part 2. Diffusive sampling
GOST 24018.0-1990 Nickel-based fire-resistant alloys. General requirements for methods of analysis

ESDU - Engineering Sciences Data Unit, The development of thermal analysis

ESDU 81044-1981 Heat transfer coefficients for water or steam in plain circular tubes: fully-developed turbulent flow.
ESDU 66027 D-1997 FRICTION LOSSES FOR FULLY-DEVELOPED FLOW IN STRAIGHT PIPES
ESDU 66027 F-2008 Friction losses for fully-developed flow in straight pipes.
ESDU 66027 E-2007 Friction losses for fully-developed flow in straight pipes
ESDU 91025 D-1997 NON-NEWTONIAN FLUIDS: FRICTIONAL PRESSURE LOSS PREDICTION FOR FULLY DEVELOPED FLOW IN STRAIGHT PIPES PART I: BACKGROUND@ ANALYSES AND SOLUTION OUTLINE
ESDU 91025 E-2011 Non-Newtonian fluids: Frictional pressure loss prediction for fully-developed flow in straight pipes

American Welding Society (AWS), The development of thermal analysis

WRC 098:1964 Part 1: Failure Analysis Of PVRC Vessel No. 5: A Study Of Materials Properties And Fracture Development
WRC 455:2000 Recent Progress In Analysis Of Residual Welding Stresses: Part 1, Part 2, & Part 3
WRC 441:1999 Development Of A Comprehensive Static Seismic Analysis Method For Piping Systems

National Aeronautics and Space Administration (NASA), The development of thermal analysis

NASA NACA-TN-2629-1952 Analytical and experimental investigation of fully developed turbulent flow of air in a smooth tube with heat transfer with variable fluid properties

American Gear Manufacturers Association, The development of thermal analysis

AGMA 13FTM16-2013 The Anatomy of a Lubrication Erosion Failure - Causation, Initiation, Progression and Prevention
AGMA 06FTM05-2006 Development of a Gear Rating Standard - A Case Study of AGMA 6014--A06
AGMA 95FTM7-1995 Experimental and Analytical Assessment of the Thermal Behavior of Spiral Bevel Gears

International Telecommunication Union (ITU), The development of thermal analysis

ITU-R QUESTION 229-25-2008 Future development of the terrestrial component of IMT
ITU-R P.311-14-2013 Acquisition presentation and analysis of data in studies of radiowave propagation
ITU-T Q.107BIS-1993 Analysis of forward address information for routing
ITU-R M.1768 FRENCH-2006 Methodology for calculation of spectrum requirements for the future development of the terrestrial component of IMT-2000 and systems beyond IMT-2000 M閠hodologie de calcul des exigences de spectre pour le d関eloppement futur de la composante de Terre des

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, The development of thermal analysis

QUESTION 229-2/5-2008 Future development of the terrestrial component of IMT

Association Francaise de Normalisation, The development of thermal analysis

NF EN 17501:2022 Essais non destructifs - Analyse thermographique - Thermographie active avec excitation laser
XP ISO/TS 5660-5:2020 Essais de réaction au feu - Débit calorifique, taux de dégagement de fumée et taux de perte de masse - Partie 5 : débit calorifique (méthode au calorimètre à cône) et taux de dégagement de fumée (mesurage dynamique) dans des atmosphères pau...
NF X20-523:1997 Natural gas. Extended analysis. Gas-chromatographic method.
NF A07-510:1971 Analysis of non-alloyed aluminium by emission spectrography.
NF A07-515:1971 Analysis of aluminium copper alloys by emission spectrography.
NF A07-500:1979 Analysis of aluminium and its alloys by emission spectrometry.
NF EN 16603-31-04:2019 Ingénierie spatiale - Échange des données d'analyse thermique
NF E31-360-1*NF EN 15036-1:2007 Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1 : airborne noise emissions from heat generators
NF T20-292:1968 Chemical analysis of sulphuric acid and oleum. Determination of ash.
A08-652:1994 Chemical analysis of titanium and titanium alloys. Rules to be followed for plasma emission spectrometrie analysis.
XP ISO/TS 22176:2020 Cosmétiques - Méthodes analytiques - Développement d'une approche globale pour la validation des méthodes analytiques quantitatives
FD A08-300:2021 Analyse chimique des aciers et des fontes - Elaboration et emploi de méthodes d'analyse par spectrométrie d'absorption atomique dans la flamme
NF A07-520:1971 Analysis of aluminium silicon and aluminium-silicon-copper alloys by emission spectrography.
NF EN ISO 11357-3:2018 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 3 : détermination de la température et de l'enthalpie de fusion et de cristallisation
NF X35-204:1997 Hot environments. Analytical determination and interpretation of thermal stress using calculation of required sweat rate.
NF T20-295:1968 CHEMICAL ANALYSIS OF SULPHURIC ACID AND OLEUM. DETERMINATION OF TOTAL NITROGEN.
NF T20-296:1970 Chemical analysis of sulphuric acid and oleums. Determination of nitrous nitrogen and nitric nitrogen.
NF EN ISO 4892-3:2016 Plastiques - Méthodes d'exposition à des sources lumineuses de laboratoire - Partie 3 : lampes fluorescentes UV
NF T20-002:1966 Standard plan for methods of chemical analysis by flame emission spectrophotometry.
NF X70-100-1:2006 Essais de comportement au feu - Analyse des effluents gazeux - Partie 1 : méthodes d'analyses des gaz provenant de la dégradation thermique
NF E35-610-2*NF EN 16905-2:2020 Gas-fired endothermic engine driven heat pumps - Part 2 : safety
NF EN ISO 22007-3:2012 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 3 : méthode par analyse de l'oscillation de la température
NF X31-426:2013 Soil quality - Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Purge-and-trap method with thermal desorption
NF T20-293:1970 Sulfuric acid and oleums for industrial use. Determination of sulphur dioxyde content.
XP A06-420*XP ENV 12908:1998 Lead and lead alloys. Analysis by Optical Emission Spectrometry (OES) with spark excitation.
NF T45-135*NF ISO 21870:2005 Rubber compounding ingredients - Carbon black - Determination of high-temperature loss on heating by thermogravimetry.
NF E31-360-2*NF EN 15036-2:2007 Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 2 : flue gas noise emissions at the outlet of the heat generator.
NF T70-538:2003 Energetic materials for defense - Safety, vulnerability - Compatibility by thermo-gravimetric analysis
NF U47-006:2009 Animal health analysis methods - Detection of antibodies against Chlamydiosis and/or Q Fever in mammals by the Complement Fixation Test.
NF U47-006:2000 Animal health analysis methods - Detection of antibodies against Chlamydiosis and/or Q Fever in mammals by the Complement Fixation Test.

Korean Agency for Technology and Standards (KATS), The development of thermal analysis

KS D 1681-2003 Method for emission spectrochemica1 analysis of aluminium ingot
KS D 1684-2008 Methods for emission spectrographic analysis of magnesium ingot
KS D 1682-2008 Methods for emission spectrochemical analysis of lead ingot
KS M ISO 248-2:2014 Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
KS D 2086-2004 Method for atomic emission spectrometric analysis of titanium
KS D 2558-1995 Method for emission spectrographic analysis of tantalum
KS M ISO 248-2-2014(2019) Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
KS D 2569-2005 Methods for ICP emission spectrometric analysis of tantalum
KS D 2569-2016 Methods for ICP emission spectrometric analysis of tantalum
KS D 2569-2016(2021) Methods for ICP emission spectrometric analysis of tantalum
KS D 2086-1993 Methods for emission spectrochemical analysis of titanium
KS D 1684-2008(2018) Methods for emission spectrographic analysis of magnesium ingot
KS D 2086-2019 Methods for atomic emission spectrometric analysis of titanium
KS D 1680-2008 General rules for photographic emission spectrochemical analysis of metal materials
KS D 1899-2003 Methods for emission spectrochemical analysis of electrolytic cathode copper
KS D 1683-1993 Method for emission spectrochemical analysis of silver ingot
KS D 1681-2018 Method for emission spectrochemical analysis of aluminium ingot
KS C 2002-1998 Test method of thermal life evaluation of plastics by thermogravimetry
KS D 2518-2015 Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS D 1685-1993 Methods for emission spectrochemical analysis of zinc metal
KS D 1658-1993 Emission-spectroscopic analysis for carbon steel and low alloy steel
KS D 1658-2003(2016) Emission-spectroscopic analysis for carbon steel and low alloy steel
KS D 1687-2007 Emission-spectroscopic analysis for pig iron and cast iron
KS D 1790-2018 Method of chemical analysis for nickel chromium electric heating material
KS D 1790-2003 Method of chemical analysis for nickel chromium electric heating material
KS D 1838-2009 Methods of chemical analysis for iron chromium electric heating material
KS L 1609-1994 Measuring method of thermal expansion of fine ceramics by thermomechanical analysis
KS R ISO TR 13487:2015 Braking of road vehicles－Considerations on the definition of mean fully developed deceleration
KS M ISO 1998-99-2003(2018)
KS D 1701-2009 Determination of trace impurities in high purity gold-Matrix extraction method by heating
KS D 1652-2007 Iron and steel-Method for spark discharge atomic emission spectrometric analysis
KS D 1929-2009 Methods for emission spectrochemical analysis of die casting zinc alloy
KS D 1929-1993 Methods for Emission Spectrochemical Analysis of Die Casting Zinc Alloy
KS D 1899-1993 Methods for emission spectrochemical analysis of electrolytic cathode copper
KS M ISO 11358-1-2017(2022) Plastics - Thermogravimetry(TG) of polymers - Part1: General principles
KS M 3706-2008(2013) Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis
KS D 1650-2008 General rules for photoelectric emission spectrochemical analysis of metal materials
KS A ISO 7933-2005(2021) Ergonomics of the thermal environment－Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
KS S 1006-3-2011(2016) Call center services－Part 3：Requirements for the training and developement of agents and staffs
KS S 1006-3-2011(2021) Call center services－Part 3：Requirements for the training and developement of agents and staffs
KS D 1673-2007 Methods for inductively coupled plasma emission spectrochemical analysis of steel
KS M ISO 11358:2006 Plastics－Thermogravimetry(TG) of polymers－General principles
KS M 3005-2002 Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis
KS M ISO 21870:2007 Rubber compounding ingredients－Carbon black－Determination of high－temperature loss on heating by thermogravimetry
KS M 3005-2002(2022) Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis

WRC - Welding Research Council, The development of thermal analysis

BULLETIN 455-2000 RECENT PROGRESS IN ANALYSIS OF RESIDUAL WELDING STRESSES
BULLETIN 98-1964 FAILURE ANALYSIS OF PVRC VESSEL NO. 5; PART 1 – A STUDY OF MATERIALS PROPERTIES AND FRACTURE DEVELOPMENT; PART 2 – AN ELECTRON MICROSCOPE FRACTOGRAPHIC STUDY OF SELECTED PORTIONS OF THE FR
BULLETIN 441-1999 DEVELOPMENT OF A COMPREHENSIVE STATIC SEISMIC ANALYSIS METHOD FOR PIPING SYSTEMS

European Committee for Standardization (CEN), The development of thermal analysis

CWA 17494:2020 Analytics Insights and Scaling Policies for Microservices
EN 13441:2001 Biotechnology - Laboratories for research, development and analysis - Guidance on containment of genetically modified plants
FprEN 16905-2 Gas-fired endothermic engine driven heat pumps - Part 2: Safety
EN 16905-2:2020 Gas-fired endothermic engine driven heat pumps - Part 2: Safety
EN ISO 15009:2013 Soil quality - Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Purge-and-trap method with thermal desorption
EN 15036-2:2006 Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 2: Flue gas noise emissions at the outlet of the heat generator
EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008)

Professional Standard - Petrochemical Industry, The development of thermal analysis

SH/T 0632-1996 Aircraft Turbine Engine Lubricant Specific Heat Determination (Thermal Analysis Method)

German Institute for Standardization, The development of thermal analysis

DIN 32705:1987-01 Classification systems; establishment and development of classification systems / Note: To be replaced by DIN 32705 (2021-01).
DIN 32705:2021-01 Classification systems - Establishment and development of classification systems / Note: Date of issue 2020-12-04*Intended as replacement for DIN 32705 (1987-01).
DIN 51004:1994 Thermal analysis; determination of melting temperatures of crystalline materials by differential thermal analysis
DIN EN 1788:2002 Foodstuffs - Thermoluminescence detection of irradiated food from which silicate minerals can be isolated; German version EN 1788:2001
DIN 53765:1994 Testing of plastics and elastomeres; thermal analysis; DSC-method
DIN 53436-2:2015-12 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 2: Thermal decomposition method
DIN EN 16905-2:2022 Gas-fired endothermic engine driven heat pumps - Part 2: Safety; German and English version prEN 16905-2:2021
DIN EN 16905-2:2020 Gas-fired endothermic engine driven heat pumps - Part 2: Safety
DIN ISO 11505:2018-02 Surface chemical analysis - General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry (ISO 11505:2012)
DIN EN 15036-2:2006 Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 2: Flue gas noise emissions at the outlet of the heat generator; English version of DIN EN 15036-2:2006-12
DIN 66079-2:1998 Graphical symbols for public information - Part 2: Development of graphical symbols and principles for their application
DIN 53436-4:2015-12 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 4: Thermal decomposition method for liquids / Note: Applies in conjunction with DIN 53436-1 (2015-12), DIN 53436-2 (2015-12).
DIN EN ISO 22007-3:2012-04 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008); German version EN ISO 22007-3:2012

Natural Gas Processor's Association (NGPA), The development of thermal analysis

GPA TP-17-1998 Table of Physical Properties of Hydrocarbons for Extended Analysis of Natural Gases

PT-IPQ, The development of thermal analysis

E E 16-1971

Professional Standard - Commodity Inspection, The development of thermal analysis

SN/T 3116-2012 Determination of nonvolatile matter of agricultural adjuvant solutions.Thermogravimetry
SN/T 3126-2012 Determination of sulfated ash of organic materials.Thermogravimetry
SN/T 3003-2011 Plastics. Thermogravimetry (TG) of polymers. General principle

American Society of Civil Engineers (ASCE), The development of thermal analysis

ASCE GSP 199-2010 GEOFLORIDA 2010 ADVANCES IN ANALYSIS, MODELING & DESIGN

AENOR, The development of thermal analysis

UNE-ISO 248-2:2013 Rubber, raw — Determination of volatilematter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit

RO-ASRO, The development of thermal analysis

STAS SR 10144-4-1995 Devetopment of intersections - Classrflcation and design specifications
SR CEI 706-3-1996 Gulde on maintalnablllty of equipmant. Part 3; Sec?iona Six and Seven. Veriflcatlon and collection, analysis and presentatlon of data.

US-CFR-file, The development of thermal analysis

CFR 24-905.606-2013 Housing and Urban Development. Part905:The public housing capital fund program. Section905.606:Development proposal.
CFR 24-3280.707-2013 Housing and Urban Development. Part3280:Manufactured home construction and safety standards. Section3280.707:Heat producing appliances.
CFR 24-3280.207-2013 Housing and Urban Development. Part3280:Manufactured home construction and safety standards. Section3280.207:Requirements for foam plastic thermal insulating materials.
CFR 32-79.1-2014 National defense. Part79:Child development programs (cdps). Section79.1:Purpose.
CFR 24-905.802-2013 Housing and Urban Development. Part905:The public housing capital fund program. Section905.802:HUD review of PHA performance.
CFR 24-905.310-2013 Housing and Urban Development. Part905:The public housing capital fund program. Section905.310:Disbursements from HUD.
CFR 24-58.35-2013 Housing and Urban Development. Part58:Environmental review procedures for entities as-suming hud environmental responsibilities. Section58.35:Categorical exclusions.
CFR 24-58.6-2013 Housing and Urban Development. Part58:Environmental review procedures for entities as-suming hud environmental responsibilities. Section58.6:Other requirements.
CFR 13-303.7-2014 Business credit and assistance. Part303:Planning investments and comprehensive economic development strategies. Section303.7:Requirements for comprehensive economic development strategies.
CFR 7-1948.92-2014 Agriculture.Part1948:Rural development. Subpart B:Section 601 energy impacted area development assistance program. Section1948.92:Grant approval and fund obligation.
CFR 13-124.501-2013 Business Credit and Assistance. Part124:Business development-small disadvantaged business status determinations. Section124.501:What general provisions apply to the award of 8(a) contracts?
CFR 13-124.510-2013 Business Credit and Assistance. Part124:Business development-small disadvantaged business status determinations. Section124.510:What percentage of work must a Participant perform on an 8(a) contract?
CFR 24-58.5-2013 Housing and Urban Development. Part58:Environmental review procedures for entities as-suming hud environmental responsibilities. Section58.5:Related Federal laws and authorities.
CFR 13-124.504-2013 Business Credit and Assistance. Part124:Business development-small disadvantaged business status determinations. Section124.504:What circumstances limit SBA's ability to accept a procurement for award as an 8(a) contract?
CFR 13-124.521-2013 Business Credit and Assistance. Part124:Business development-small disadvantaged business status determinations. Section124.521:What are the requirements for representing 8(a) status, and what are the penalties for misrepresentation?
CFR 13-124.1015-2013 Business Credit and Assistance. Part124:Business development-small disadvantaged business status determinations. Section124.1015:What are the requirements for representing 8(a) status, and what are the penalties for misrepresentation?
CFR 7-1485.19-2014 Agriculture. Part1485:Grant agreements for the development of foreign markets for U.S agricultural commodities. SubpartB:Market access program. Section1485.19:Advances.
CFR 7-2.45-2014 Agriculture. Part2:Delegations of authority by the secretary of agriculture and general officers of the department. Subpart G:Delegations of authority by the under secretary for rural development. Section2.45:Deputy under secretary for rural development.
CFR 13-304.1-2014 Business credit and assistance. Part304:Economic development districts. Section304.1:Designation of economic development districts: regional eligibility.
CFR 13-124.503-2013 Business Credit and Assistance. Part124:Business development-small disadvantaged business status determinations. Section124.503:How does SBA accept a procurement for award through the 8(a) BD program?
CFR 24-92.201-2013 Housing and Urban Development. Part92:Home investment partnerships program. Section92.201:Distribution of assistance.
CFR 13-124.1016-2013 Business Credit and Assistance. Part124:Business development-small disadvantaged business status determinations. Section124.1016:What must a concern do in order to be identified as a SDB in any Federal procurement database?

CZ-CSN, The development of thermal analysis

CSN 72 1083-1972 Thermic analysis of ceramic raw materials

Japanese Industrial Standards Committee (JISC), The development of thermal analysis

JIS K 0129:1994 General rules for thermal analysis
JIS H 1691:1968 Method for spectrochemical analysis of tantalum
JIS H 1183:2007 Method for emission spectrochemical analysis of silver bullion
JIS H 1630:1995 Method for atomic emission spectrometric analysis of titanium
JIS H 1630:1975 Method for atomic emission spectrometric analysis of titanium
JIS H 1699:1999 Methods for ICP emission spectrometric analysis of tantalum
JIS H 1699:2006 Methods for ICP emission spectrometric analysis of tantalum
JIS H 1183:1993 Method for atomic emission spectrophotographic analysis of silver bullion
JIS R 1618:1994 Measuring method of thermal expansion of fine ceramics by thermomechanical analysis
JIS H 1303:1976 Method for emission spectrochemical analysis of aluminium ingot
JIS H 1322:1976 Method for emission spectrochemical analysis of magnesium ingot
JIS H 1113:1994 Method for atomic emission spectrophotoelectric analysis of zinc metal
JIS H 1113:2014 Method for photoelectric emission spectrochemical analysis of zinc metal
JIS R 1618:2002 Measuring method of thermal expansion of fine ceramics by thermomechanical analysis
JIS H 1305:2005 Method for optical emission spectrochemical analysis of aluminium and aluminium alloys
JIS G 1251:1976 Emission-spectroscopic analysis for pig iron and cast iron
JIS K 7120:1987 Testing methods of plastics by thermogravimetry
JIS H 1560:1994 Method for atomic emission spectrophotoelectric analysis of die casting zinc alloy
JIS G 1258:1989 Methods for inductively coupled plasma emission spectrochemical analysis of steel
JIS H 1123:1995 Method for photoelectric emission spectrochemical analysis of lead metal
JIS H 1411:1996 Methods of chemical analysis for iron chromium electric heating material
JIS H 1412:1996 Methods of chemical analysis for nickel chromium electric heating material
JIS G 0320:2004 Standard test methods for heat analysis of steel products
JIS G 0320:2009 Standard test method for heat analysis of steel products
JIS H 1163:1991 Method for photoelectric emission spectrochemical analysis of cadmium metal
JIS H 1113:2022 Method for photoelectric emission spectrochemical analysis of zinc metal
JIS H 1103:1995 Method for photoelectric emission spectrochemical analysis of electrolytic cathode copper
JIS H 1560:2016 Method for photoelectric emission spectrochemical analysis of die casting zinc alloys
JIS G 1252:1975 Emission-spectroscopic analysis for carbon steel and low alloy steel
JIS G 1253:1995 Iron and steel -- Method for spark discharge atomic emission spectrometric analysis

U.S. Environmental Protection Agency (U.S. EPA), The development of thermal analysis

EPA 40 CFR PART 1400-2010 DISTRIBUTION OF OFFSITE CONSEQUENCE ANALYSIS INFORMATION

GB-REG, The development of thermal analysis

REG 40 CFR PART 1400-2011 DISTRIBUTION OF OFFSITE CONSEQUENCE ANALYSIS INFORMATION

US-FCR, The development of thermal analysis

FCR 40 CFR PART 1400-2014 DISTRIBUTION OF OFFSITE CONSEQUENCE ANALYSIS INFORMATION
FCR 40 CFR PART 1400-2015 DISTRIBUTION OF OFFSITE CONSEQUENCE ANALYSIS INFORMATION
FCR 40 CFR PART 1400-2013 DISTRIBUTION OF OFFSITE CONSEQUENCE ANALYSIS INFORMATION
FCR COE SL-89-6 FINAL REPORT-1989 THERMAL STRESS ANALYSIS OF LOCK WALL, DASHIELDS LOCKS, OHIO RIVER

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, The development of thermal analysis

GB/T 36065-2018 Nanotechnologies—Analysis of amorphous carbon, ash and volatile of carbon nanotubes—Thermogravimetry
GB/T 24131.2-2017 Rubber,raw—Determination of volatile-matter content—Part 2:Thermogravimetric methods using an automatic analyser with an infrared drying unit
GB/T 4498.2-2017 Rubber—Determination of ash—Part 2: Thermogravimetric analysis
GB/T 32997-2016 Surface chemical analysis—General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The development of thermal analysis

GB/T 16599-1996 Methods for emission spectrum analysis of molybdenum
GB/T 16600-1996 Methods for emission spectrum analysis of tungsten
GB/T 13464-1992 Thermal analysis test methods for thermal stability of materials
GB/T 13464-2008 Thermal analysis test methods for thermal stability of materials
GB/T 5009.49-2003 Method for analysis of hygienic standard of fermented wines
GB/T 31540.2-2015 Fire safety engineering guide.Part 2:Initiation and development of fire and generation of fire effluents
GB/T 11170-1989 Method for photoelectric emission spectroscopic analysis of stainless steel
GB/T 19469-2004 Determination of ignition temperature of pyrotechnic composition-DTA-TG analysis
GB/T 5009.52-2003 Method for analysis of hygienic standard of fermented been products
GB/T 17802-2011 Thermal analysis test methods for Arrhenius kinetics constants of thermally unstable materials
GB/T 29189-2012 Thermo gravimetric analysis(TGA) for determination of oxidation temperature and ash content of carbon nanotubes
GB/T 29174-2012 Thermal analysis test method for constant-temperature stability of materials
GB/T 5009.49-2008 Method for analysis of hygienic standard of fermented alcoholic beverages and their integrated alcoholic beverages
GB/T 29559-2013 Surface chemical analysis.Analysis of zinc and/or aluminium based metallic coatings by glow discharge optical emission spectrometry
GB/T 27761-2011 Standard test method of mass loss and residue measurement validation of thermogravimetric analyzers
GB/T 27762-2011 Standard test method for mass scale calibration of thermogravimetric analyzers
GB/T 42919.3-2023 Determination of thermal conductivity and thermal diffusivity of plastics - Part 3: Temperature wave analysis

Professional Standard - Non-ferrous Metal, The development of thermal analysis

YS/T 558-2009 Methods for emission spectrum analysis of molybdenum
YS/T 559-2009 Methods for emission spectrum analysis of tungsten
YS/T 558-2006 Molybdenum Emission Spectroscopy Analysis Method
YS/T 559-2006 Tungsten Emission Spectroscopy Analysis Method
YS/T 361-2006 Determination of trace impurities in purity platinum by atomic emission spectrometric
YS/T 362-2006 Determination of trace impurities in purity palladium by atomic emission spectrometric
YS/T 363-2006 Determination of trace impurities in purity rhodium by atomic emission spectrometric
YS/T 364-2006 Determination of trace impurities in purity iridium by atomic emission spectrometric
YS/T 361-1994 Emission Spectral Analysis of Impurity Elements in Pure Platinum
YS/T 362-1994 Emission spectrum analysis of impurity elements in pure palladium
YS/T 363-1994 Emission spectrum analysis of impurity elements in pure rhodium
YS/T 364-1994 Emission Spectral Analysis of Impurity Elements in Pure Iridium
YS/T 365-2006 Determination of trace impurities in high purity palladium by atomic emission spectrometric
YS/T 365-1994 Emission Spectrum Analysis of Impurity Elements in High Purity Platinum

British Standards Institution (BSI), The development of thermal analysis

BS ISO 248-2:2012 Rubber, raw. Determination of volatile-matter content. Thermogravimetric methods using an automatic analyser with an infrared drying unit
BS 1016-105:1992 Methods for analysis and testing of coal and coke - Determination of gross calorific value
BS PD ISO/TS 18790-1:2015 Health informatics. Profiling framework and classification for Traditional Medicine informatics standards development. Traditional Chinese Medicine
BS ISO 247-2:2018 Rubber. Determination of ash. Thermogravimetric analysis (TGA)
BS ISO 248-2:2019 Tracked Changes. Rubber, raw. Determination of volatile-matter content. Thermogravimetric methods using an automatic analyser with an infrared drying unit
PD ISO/TS 22176:2020 Cosmetics. Analytical methods. Development of a global approach for validation of quantitative analytical methods
BS ISO 11505:2012 Surface chemical analysis. General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry
DD ENV 12908:1998 Lead and lead alloys. Analysis by optical emission spectrometry (OES) with spark excitation
BS ISO 11359-3:2002 Plastics - Thermomechanical analysis (TMA) - Determination of penetration temperature
BS EN ISO 11358-1:2022 Plastics. Thermogravimetry (TG) of polymers - General principles
BS ISO 21870:2005 Rubber compounding ingredients - Carbon black - Determination of high-temperature loss on heating by thermogravimetry
BS ISO 5071-1:2013 Brown coals and lignites. Determination of the volatile matter in the analysis sample. Two-furnace method
BS EN ISO 15009:2012 Soil quality. Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons. Purge-and-trap method with thermal desorption
BS EN ISO 15009:2013 Soil quality. Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons. Purge-and-trap method with thermal desorption
BS 5766-8:1999 Methods for analysis of animal feeding stuffs. Determination of moisture and other volatile matter content
BS EN ISO 11358-1:2014 Plastics. Thermogravimetry (TG) of polymers. General principles
BS EN ISO 11358:1997 Plastics - Thermogravimetry (TG) of polymers - General principles
PD ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests

(U.S.) Ford Automotive Standards, The development of thermal analysis

FORD FLTM BZ 154-1-2002 THREMOGRAVIMETRIC ANALYSIS (TGA) OF GASOLINE GUMS
FORD FLTM BZ 154-01-2002 THREMOGRAVIMETRIC ANALYSIS (TGA) OF GASOLINE GUMS
FORD FLTM EU-AZ 053-01-2001 PYROLYTIC GAS CHROMATOGRAPHIC ANALYSIS OF FRICTION MATERIALS
FORD FLTM EU-AZ 053-1-2001 PYROLYTIC GAS CHROMATOGRAPHIC ANALYSIS OF FRICTION MATERIALS

American National Standards Institute （ANSI), The development of thermal analysis

ANSI/ASTM D6375:2009 Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) (Noack Method)

Standard Association of Australia （SAA）, The development of thermal analysis

AS 1683.18:2001 Methods of test for rubber - Determination of flex cracking and crack growth of vulcanized or thermoplastic rubber (De Mattia)

International Organization for Standardization (ISO), The development of thermal analysis

ISO 248-2:2019 Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
ISO 248-2:2012 Rubber, raw - Determination of volatile-matter content - Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
ISO/TS 18790-1:2015 Health informatics - Profiling framework and classification for Traditional Medicine informatics standards development - Part 1: Traditional Chinese Medicine
ISO/TS 22176:2020 Cosmetics — Analytical methods — Development of a global approach for validation of quantitative analytical methods
ISO 247-2:2018 Rubber - Determination of ash - Part 2: Thermogravimetric analysis (TGA)
ISO/CD 16094-3 Water quality — Analysis of plastics in water — Part 3: Thermo-analytical methods for waters with low content of natural suspended solids
ISO 11358-1:2022 Plastics — Thermogravimetry (TG) of polymers — Part 1: General principles
ISO/TR 12802:2010 Nanotechnologies - Model taxonomic framework for use in developing vocabularies - Core concepts
ISO 7111:1987 Plastics; Thermogravimetry of polymers; Temperature scanning method
ISO/TR 13387-4:1999 Fire safety engineering - Part 4: Initiation and development of fire and generation of fire effluents
ISO/DTS 20077-3 Road vehicles — Extended vehicle (ExVe) methodology — Part 3: Upstream process to develop services
ISO 19150-2:2015 Geographic information - Ontology - Part 2: Rules for developing ontologies in the Web Ontology Language (OWL)
ISO/TS 20077-3:2023 Road vehicles — Extended vehicle (ExVe) methodology — Part 3: Upstream process to develop services
ISO/DTS 20077-3.2:2023 Road vehicles — Extended vehicle (ExVe) methodology — Part 3: Upstream process to develop services
ISO 21870:2005 Rubber compounding ingredients - Carbon black - Determination of high-temperature loss on heating by thermogravimetry

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), The development of thermal analysis

ASHRAE CH-06-6-2006 Symposium on Thermal Modeling of Phase-Change Materials in Building Envelopes: Old Problem, New Developments
ASHRAE 4763-2005 Integrated Thermal and Daylighting Analysis for Design of Office Buildings
ASHRAE 4713-2004 Development of Energy-Efficient Single-Coil Twin-fan Air-Conditioning System with Zonal Ventilation Control

IETF - Internet Engineering Task Force, The development of thermal analysis

RFC 5263-2008 Session Initiation Protocol (SIP) Extension for Partial Notification of Presence Information
RFC 5021-2007 Extended Kerberos Version 5 Key Distribution Center (KDC) Exchanges over TCP

GOSTR, The development of thermal analysis

GOST 34418-2018 Palladium. Methods of atomic-emission analysis with arc excitement of a range
GOST 28353.2-2017 Silver. Method of inductively coupled plasma atomic-emission analysis

Professional Standard - Agriculture, The development of thermal analysis

GB/T 5009.49-1996 Analytical method of hygienic standard for fermented wine
GB/T 5009.52-1996 Analytical method of hygienic standard for fermented soybean products

Professional Standard - Energy, The development of thermal analysis

NB/SH/T 0859-2013 Standard test method for the thermal stability of chemicals by thermal analysis
NB/SH/T 0867-2013 Standard test method for determination of soot in diesel engine oils by thermal gravimetric analyzer

Professional Standard - Electricity, The development of thermal analysis

DL/T 502.27-2006 Analytical methods of steam and water in power plants Part 27: Determination of suspended iron
DL/T 502.5-2006 Analytical methods of steam and water in power plants Part 5: Determination of acidity
DL/T 502.25-2019 Moisture Analysis Methods for Thermal Power Plants Part 25: Measurement of Total Iron

North Atlantic Treaty Organization Standards Agency, The development of thermal analysis

STANAG 7017-1994 SPECTROMETRIC ANALYSIS OF AIRCRAFT ENGINE LUBRICANTS

Society of Automotive Engineers (SAE), The development of thermal analysis

SAE J409-1995 Product Analysis Permissible Variations from Specified chemical analysis of a Heat or Cast of Steel
SAE ARP1533B-2013 Procedure for the Analysis and Evaluation of Gaseous Emissions from Aircraft Engines

Danish Standards Foundation, The development of thermal analysis

DS/ISO/TR 13387-4:2000 Fire safety engineering - Part 4: Initiation and development of fire and generation of fire effluents
DS/EN ISO 11358:1997 Plastics - Thermogravimetry (TTG) of polymers - General principles
DS/EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method

AT-ON, The development of thermal analysis

ONORM B 4435-2-1999 Geotechnical engineering - Spread foundations - EUROCODE-orientated analysis of bearing capacity
ONORM M 6609-1993 Water analysis - Determination of the inhibitory effect of waste water on the light emission of Photobacterium phosphoreum
ONORM M 6236-1993 Water analysis - Determination of easily volatile halogenated hydrocarbons - Head space gas Chromatographie method

Professional Standard - Electron, The development of thermal analysis

SJ/Z 3206.1-1989 General requirements for laboratories involved with determination of emision spectrum
SJ/Z 3206.6-1989 Shapes and dimensions of graphite electrode for emision spectrum

KR-KS, The development of thermal analysis

KS D 1658-2003(2016)(英文版) Emission-spectroscopic analysis for carbon steel and low alloy steel
KS C 2002-1998(2023) Test method of thermal life evaluation of plastics by thermogravimetry

Professional Standard - Nuclear Industry, The development of thermal analysis

EJ/T 767-1993 X-ray fluorescence analyzer excited by radioactive sources

ES-UNE, The development of thermal analysis

UNE-ISO 247-2:2022 Rubber. Determination of ash. Part 2. Termogravimetric análisis (TGA)

Indonesia Standards, The development of thermal analysis

SNI 13-6340.3-2000 Terms of socio-economic of mining - Part C: Development of society and mining zone

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, The development of thermal analysis

GJB 5382.11-2005 Test methods of physical parameter for pyrotechnic. Part 11: Determination of Autoignition temperature. DTA and DSC method

Military Standard of the People's Republic of China-General Armament Department, The development of thermal analysis

GJB 8683.11-2015 Test methods for physical parameters of pyrotechnics Part 11: Determination of spontaneous ignition temperature Differential thermal analysis and differential scanning calorimetry

U.S. Military Regulations and Norms, The development of thermal analysis

ARMY MIL-S-64045 SUPP 1C-2003 SCALE, GRAPHICAL FIRING, GENERAL SPECIFICATION FOR
ARMY MIL-S-64045 NOTICE 1-1998 SCALE, GRAPHICAL FIRING, GENERAL SPECIFICATION FOR
ARMY MIL-S-64045-1983 SCALE, GRAPHICAL FIRING, GENERAL SPECIFICATION FOR

Institute of Electrical and Electronics Engineers (IEEE), The development of thermal analysis

IEEE 101-1987 Guide for the Statistical Analysis of Thermal Life Test Data

Canadian General Standards Board （CGSB), The development of thermal analysis

CGSB 149-GP-2MP-1986 Manual for Thermographic Analysis of Building Enclosures

PL-PKN, The development of thermal analysis

PN H04098-1988 Chemical analysis of manganese ores Determination of the ignition loss of mass

YU-JUS, The development of thermal analysis

JUS B.H8.317-1988 Methods of analysis of coal and coke. Determiuation of the volatile matter content

U.S. Air Force, The development of thermal analysis

AIR FORCE A-A-59751 A VALID NOTICE 1-2012 Analyzer, Spectrum, 2.9 GHZ RF with Internal Tracking Generator

ITE - Institute of Transportation Engineers, The development of thermal analysis

RP-020D-2010 Transportation Impact Analyses for Site Development : An ITE Recommended Practice

Professional Standard - Public Safety Standards, The development of thermal analysis

GA/T 76-1994 Test method for thermal analysis of the constant temperature stability of substances

未注明发布机构, The development of thermal analysis

BS 5131-1.8:1981(1999) Methods of test for Footwear and footwear materials — Part 1 : Adhesives — Section 1.8 Rate of bond strength development in shear of hot melt adhesives for lasting
SAE AS13003-201502 Measurement Systems Analysis Requirements for the Aero Engine Supply Chain

Malaysia Standards, The development of thermal analysis

MS 1466-1999 Method of test for linear thermal expansion of solid materials by thermomechanical analysis

SAE - SAE International, The development of thermal analysis

SAE AS13003-2015 Measurement Systems Analysis Requirements for the Aero Engine Supply Chain
SAE ARP1533C-2016 Procedure for the Analysis and Evaluation of Gaseous Emissions from Aircraft Engines
SAE ARP1533A-2004 Procedure for the Analysis and Evaluation of Gaseous Emissions from Aircraft Engines

NATO - North Atlantic Treaty Organization, The development of thermal analysis

AFLP-7017-2016 SPECTOMETRIC ANALYSIS OF AIRCRAFT ENGINE LUBRICANTS (ED A@ Ver 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso.nato.int.

IT-UNI, The development of thermal analysis

UNI 4353-1959

国家市场监督管理总局、中国国家标准化管理委员会, The development of thermal analysis

GB/T 36402-2018 Thermal analysis-mass spectrometry coupling method for ceramics materials

AGMA - American Gear Manufacturers Association, The development of thermal analysis

95FTM7-1995 Experimental and Analytical Assessment of the Thermal Behavior of Spiral Bevel Gears

European Telecommunications Standards Institute (ETSI), The development of thermal analysis

ETSI TR 136 921-2010 LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); FDD Home eNode B (HeNB) Radio Frequency (RF) requirements analysis V9.0.0; 3GPP TR 36.921 version 9.0.0 Release 9