ZH
RU
ES
Test method for sphericity
Test method for sphericity, Total:497 items.
In the international standard classification, Test method for sphericity involves: Optics and optical measurements, Glass, Ceramics, Geology. Meteorology. Hydrology, Sports equipment and facilities, Fuels, Products of the textile industry, Leather technology, Ferrous metals, Iron and steel products, Paints and varnishes, Plastics, Paint coating equipment, Pulps, Construction materials, Adhesives, Testing of metals, Non-metalliferous minerals, Soil quality. Pedology, Medical equipment, Analytical chemistry, Protection against fire, Electrical engineering in general, Linear and angular measurements, Non-textile floor coverings, Graphical symbols, Earthworks. Excavations. Foundation construction. Underground works, Refractories, Elements of buildings, Raw materials for rubber and plastics, Textile fibres, Kitchen equipment, Electrical wires and cables, Metalliferous minerals, Waxes, bituminous materials and other petroleum products, Reinforced plastics, Equipment for the glass and ceramics industries, Commercial vehicles, Road vehicle systems, Structures of buildings, Protection of and in buildings, Rubber, Water quality, Insulating materials, Lubricants, industrial oils and related products, Products of the chemical industry, Metrology and measurement in general, Particle size analysis. Sieving, Seals, glands, Measurement of volume, mass, density, viscosity, Electronic tubes, Woodworking equipment, Non-ferrous metals, Motor cycles and mopeds, Printed circuits and boards, Paper and board, Ferroalloys, Road engineering, Paint ingredients, Graphic technology, Pipeline components and pipelines.
American Society for Testing and Materials (ASTM), Test method for sphericity
- ASTM E1348-02(2007) Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
- ASTM E1348-02 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
- ASTM D1155-03 Standard Test Method for Roundness of Glass Spheres
- ASTM D1155-89(1994)e1 Standard Test Method for Roundness of Glass Spheres
- ASTM D1155-10(2020) Standard Test Method for Roundness of Glass Spheres
- ASTM D1155-10(2015) Standard Test Method for Roundness of Glass Spheres
- ASTM E337-84(1996)e1 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
- ASTM E337-02 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
- ASTM E337-15(2023) Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
- ASTM E337-02(2007) Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
- ASTM E1331-15(2019) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
- ASTM E1331-96 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
- ASTM E1348-15 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
- ASTM D3802-23 Standard Test Method for Ball-Pan Hardness of Activated Carbon
- ASTM E28-67(1977) Standard Test Method for Softening Point By Ring-And-Ball Apparatus
- ASTM E28-67(1982)e1 Standard test Method for Softening Point by Ring-and-Ball Apparatus
- ASTM E1348-90 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
- ASTM E1348-90(1996) Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
- ASTM E1348-15e1 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
- ASTM D6797-07 Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
- ASTM D6797-07(2011) Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
- ASTM D2207-00(2021) Standard Test Method for Bursting Strength of Leather by the Ball Method
- ASTM E2567-16a(2023) Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis
- ASTM E2567-12a Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis
- ASTM E1331-04 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
- ASTM E1331-09 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
- ASTM E337-15 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
- ASTM D6797-02 Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
- ASTM D1155-10 Standard Test Method for Roundness of Glass Spheres
- ASTM D2207-00(2005) Standard Test Method for Bursting Strength of Leather by the Ball Method
- ASTM D2207-00 Standard Test Method for Bursting Strength of Leather by the Ball Method
- ASTM D2207-00(2010) Standard Test Method for Bursting Strength of Leather by the Ball Method
- ASTM E1331-15 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
- ASTM D3787-07 Standard Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test
- ASTM D6737-01(2006) Standard Test Method for Bulk Density of Tapered Paintbrush Filaments
- ASTM D6737-01 Standard Test Method for Bulk Density of Tapered Paintbrush Filaments
- ASTM F1881-98 Standard Test Method for Measuring Baseball Bat Performance Factor
- ASTM D6188-17(2022) Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall
- ASTM D2207-00(2015) Standard Test Method for Bursting Strength of Leather by the Ball Method
- ASTM D36-76 Standard Test Method for Softening Point Of Bitumen (Ring-And-Ball Apparatus)
- ASTM D36/D36M-14(2020) Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
- ASTM D1875-03(2018) Standard Test Method for Density of Adhesives in Fluid Form
- ASTM E643-09 Standard Test Method for Ball Punch Deformation of Metallic Sheet Material
- ASTM D1343-95(2006) Standard Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method
- ASTM D1343-95(2011) Standard Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method
- ASTM F2079-02 Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents
- ASTM F2079-01 Standard Test Method for Measuring Recoil of Balloon-Expandable Stents
- ASTM F2079-09 Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents
- ASTM D3802-79(1999) Standard Test Method for Ball-Pan Hardness of Activated Carbon
- ASTM D3802-79(2005) Standard Test Method for Ball-Pan Hardness of Activated Carbon
- ASTM D3802-10 Standard Test Method for Ball-Pan Hardness of Activated Carbon
- ASTM D3802-16 Standard Test Method for Ball-Pan Hardness of Activated Carbon
- ASTM E1348-11 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
- ASTM D5587-05 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
- ASTM D5587-03 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
- ASTM D1343-95(2000) Standard Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method
- ASTM D1343-95(2019) Standard Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method
- ASTM F1888-09(2016) Standard Test Method for Compression-Displacement of Baseballs and Softballs
- ASTM E1331-96(2003) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
- ASTM D4032-94 Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
- ASTM D4032-94(2001) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
- ASTM D4032-08 Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
- ASTM D4032-08(2012) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
- ASTM D4032-08(2016) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
- ASTM D7005/D7005M-16 Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
- ASTM F2055-17 Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method
- ASTM D6188-17 Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall
- ASTM D2167-94(2001) Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
- ASTM F2845-22 Standard Test Method for Measuring the Dynamic Stiffness (DS) and Cylindrical Coefficient of Restitution (CCOR) of Baseballs and Softballs
- ASTM F1881-05 Standard Test Method for Measuring Baseball Bat Performance Factor
- ASTM F1881-04 Standard Test Method for Measuring Baseball Bat Performance Factor
- ASTM F1890-04 Standard Test Method for Measuring Softball Bat Performance Factor
- ASTM F1890-05 Standard Test Method for Measuring Softball Bat Performance Factor
- ASTM F1881-09 Standard Test Method for Measuring Baseball Bat Performance Factor
- ASTM F1890-09 Standard Test Method for Measuring Softball Bat Performance Factor
- ASTM F1890-11 Standard Test Method for Measuring Softball Bat Performance Factor
- ASTM F1881-11 Standard Test Method for Measuring Baseball Bat Performance Factor
- ASTM D6737-12(2017) Standard Test Method for Bulk Density of Tapered Paintbrush Filaments
- ASTM D5587-07a Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
- ASTM D5587-07 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
- ASTM D2167-08 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
- ASTM D5994-98 Standard Test Method for Measuring Core Thickness of Textured Geomembrane
- ASTM F1632-02 Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
- ASTM F1632-03(2018) Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
- ASTM D1513-05e2 Standard Test Method for Carbon Black, Pelleted&8212;Pour Density
- ASTM D1511-12(2017) Standard Test Method for Carbon Black—Pellet Size Distribution
- ASTM D4832/D4832M-23 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Cylindrical Test Specimens
- ASTM F3460-21 Standard Test Method for Seam Measurement Procedure for Baseballs and Softballs
- ASTM F1887-02 Standard Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs
- ASTM F1887-09 Standard Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs
- ASTM F2844-20 Standard Test Method for Displacement Compression of Softball and Baseball Bat Barrels
- ASTM D4287-00(2023) Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
- ASTM E1477-98a Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
- ASTM G194-08 Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane
- ASTM G194-08(2013) Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane
- ASTM F1926/F1926M-14(2021) Standard Test Method for Dissolution Testing of Calcium Phosphate Granules, Fabricated Forms, and Coatings
- ASTM D5587-96(2003) Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
- ASTM D5587-08 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
- ASTM F874-98(2019) Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors
- ASTM D648-06 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
- ASTM D648-16 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
- ASTM B279-98 Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
- ASTM B279-04 Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
- ASTM F1890-17e1 Standard Test Method for Measuring Softball and Baseball Bat Performance Factor
- ASTM F2219-05 Test Methods for Measuring High-Speed Bat Performance
- ASTM F2219-04 Standard Test Methods for Measuring High Speed Baseball Bat Performance Factor
- ASTM F1890-17 Standard Test Method for Measuring Softball and Baseball Bat Performance Factor
- ASTM F1890-23 Standard Test Method for Measuring Softball and Baseball Bat Performance Factor
- ASTM F2845-10 Standard Test Method for Measuring the Dynamic Stiffness (DS) and Cylindrical Coefficient of Restitution (CCOR) of Baseballs and Softballs
- ASTM D2840-69 Method of Test for Average True Particle Density of Hollow Microspheres
- ASTM E1348-22 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
- ASTM E382-02 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
- ASTM E382-97 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
- ASTM E382-20 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets and Direct-Reduced Iron
- ASTM D5587-14 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
- ASTM D5587-15 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
- ASTM F780-93a(1998) Standard Test Method for Linear Deformation and Breaking Strength of Alpine Skis
- ASTM D6024-02 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application
- ASTM F540-98 Standard Test Method for Squareness of Resilient Floor Tile by Dial Gage Method (Withdrawn 2004)
- ASTM F1887-14 Standard Test Method for Measuring the Coefficient of Restitution 40;COR41; of Baseballs and Softballs
- ASTM D2167-94 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
- ASTM C1090/C1090M-23 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
- ASTM E1477-98a(2003) Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
- ASTM E1477-98a(2008) Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
- ASTM E1651-94(1999) Standard Test Method for Total Luminous Reflectance Factor by Use of 30/t Integrating-Sphere Geometry
- ASTM E1477-98a(2013) Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
- ASTM D3787-01 Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test
- ASTM D3787-89 Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test
- ASTM F2398-10 Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
- ASTM D2519-01 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
- ASTM D2519-96 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
- ASTM D2519-02 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
- ASTM D6077-00 Standard Test Method for Trapezoid Tearing Strength of Leather
- ASTM D6077-00(2005) Standard Test Method for Trapezoid Tearing Strength of Leather
- ASTM D6077-16(2023) Standard Test Method for Trapezoid Tearing Strength of Leather
- ASTM D6077-16 Standard Test Method for Trapezoid Tearing Strength of Leather
- ASTM D1403-97 Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
- ASTM D1403-02(2007) Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
- ASTM F2219-10 Standard Test Methods for Measuring High-Speed Bat Performance
- ASTM D2783-03(2009) Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
- ASTM F2219-07 Standard Test Methods for Measuring High-Speed Bat Performance
- ASTM F2219-13 Standard Test Methods for Measuring High-Speed Bat Performance
- ASTM F2219-14 Standard Test Methods for Measuring High-Speed Bat Performance
- ASTM D1414-94(1999) Standard Test Methods for Rubber O-Rings
- ASTM D2492-02(2007) Standard Test Method for Forms of Sulfur in Coal
- ASTM D2492-02 Standard Test Method for Forms of Sulfur in Coal
- ASTM C827-01a Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
- ASTM C827-01 Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
- ASTM C827-01a(2005) Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
- ASTM D6616-20 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 °C
- ASTM D6616-20a Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 °C
- ASTM D6616-21 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 ��C
- ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM D6188-97 Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall
- ASTM D6188-97(2003) Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall
- ASTM D6188-97(2008) Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall
- ASTM D1578-93 Standard Test Method for Breaking Strength of Yarn in Skein Form
- ASTM D1578-93(2000) Standard Test Method for Breaking Strength of Yarn in Skein Form
- ASTM F780-93a(2006) Standard Test Method for Linear Deformation and Breaking Strength of Alpine Skis
- ASTM C1090-10 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
- ASTM D1505-98e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
- ASTM D1505-85(1990)e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
- ASTM D1067-06 Standard Test Methods for Acidity or Alkalinity of Water
- ASTM D6077-10 Standard Test Method for Trapezoid Tearing Strength of Leather
- ASTM D88-81(1987)e1 Standard Test Method for Saybolt Viscosity
- ASTM D88-94(1999) Standard Test Method for Saybolt Viscosity
- ASTM D1084-97 Standard Test Methods for Viscosity of Adhesives
- ASTM C949-80(2012) Standard Test Method for Porosity in Vitreous Whitewares by Dye Penetration
- ASTM D88/D88M-07(2019)e1 Standard Test Method for Saybolt Viscosity
- ASTM D88-56(1968) Standard Method Of Test For Saybolt Viscosity
- ASTM D1084-97(2005) Standard Test Methods for Viscosity of Adhesives
- ASTM C39/C39M-10 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-17 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-09a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM F874-98(2008) Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors
- ASTM F874-98(2014) Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors
- ASTM E28-67 Standard Method Of Test For Softening Point By Ring-And-Ball Apparatus
- ASTM D6503-99 Standard Test Method for Enterococci in Water Using EnterolertTM
- ASTM D6503-99(2005) Standard Test Method for Enterococci in Water Using Enterolert
- ASTM C1090-01(2005)e1 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
- ASTM C1090-01 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens from Hydraulic-Cement Grout
- ASTM C1090-96 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens from Hydraulic-Cement Grout
- ASTM D3786/D3786M-18(2023) Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
- ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM F2398-04 Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
- ASTM F2398-04e1 Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
- ASTM D1875-95 Standard Test Method for Density of Adhesives in Fluid Form
- ASTM D4533-91(1996) Standard Test Method for Trapezoid Tearing Strength of Geotextiles
- ASTM C39/C39M-12a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-18 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-14 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-14a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-16 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM D4533/D4533M-15 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
- ASTM D6024/D6024M-15 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application
- ASTM E2567-16 Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis
- ASTM E2567-16a Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis
- ASTM D7971-15 Standard Guide for Measuring Roundness of Glass Spheres Using a Flowing Stream Digital Image Analyzer
- ASTM E1349-06(2013) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45deg;:0deg; or 0deg;:45deg;) Geometry
- ASTM D1813-13(2017) Standard Test Method for Measuring Thickness of Leather Test Specimens
- ASTM D4741-21 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
- ASTM D4741-18 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
- ASTM D1403-02 Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
- ASTM D4741-20a Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
- ASTM D4741-20 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
- ASTM D4741-17 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
- ASTM D2783-19 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
- ASTM D6090-99(2004) Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)
- ASTM D2783-03 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
- ASTM D3121-94(1999) Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
- ASTM D2783-88(1998) Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
- ASTM D6090-99(2008) Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)
- ASTM D2783-21 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
- ASTM D2596-14 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
- ASTM D2783-03(2014) Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
- ASTM D2596-15 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
- ASTM D3121-17 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
- ASTM B279-13(2019) Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
- ASTM D5587-96 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
- ASTM D5587-07ae1 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
- ASTM D1578-93(2022) Standard Test Method for Breaking Strength of Yarn in Skein Form
- ASTM D5587-15(2019) Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
- ASTM D6737-12 Standard Test Method for Bulk Density of Tapered Paintbrush Filaments
- ASTM D4533/D4533M-15(2023) Standard Test Method for Trapezoid Tearing Strength of Geotextiles
- ASTM F1319-94(2005) Standard Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Crockmeter Method)
- ASTM B428-93(1998)e1 Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
- ASTM F2398-11(2020) Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
- ASTM D3773-90(1996)e1 Standard Test Methods for Length of Woven Fabric
- ASTM B294-92(1997) Standard Test Method for Hardness Testing of Cemented Carbides
- ASTM B294-92(2001) Standard Test Method for Hardness Testing of Cemented Carbides
- ASTM B294-92(2006) Standard Test Method for Hardness Testing of Cemented Carbides
- ASTM B294-92(2006)e1 Standard Test Method for Hardness Testing of Cemented Carbides
- ASTM D217-97 Standard Test Methods for Cone Penetration of Lubricating Grease
- ASTM D3773/D3773M-10(2019) Standard Test Methods for Length of Woven Fabric
- ASTM F2398-11 Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
- ASTM F2398-11(2015) Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Test method for sphericity
- GB/T 42665-2023 Test method for spherical indentation strength of porous ceramics
- GB/T 14625.1-2008 Test methods for basketball,football,volleyball and handball-
Part 1:Measurement of roundness
- GB/T 20451-2006 Test method for ball-pan hardness of activated carbon
- GB/T 14625.2-2008 Test methods for basketball, football, volleyball and handball-
Part 2: Measurement of bouncing altitude
- GB/T 14625.5-2008 Test methods for basketball,football,volleyball and handball-
Part 5:Measurement of circumference and its variation
- GB 8209-1987 Iron one pellets and slnter - Determination of tumbler strength
- GB/T 1634.1-2004 Plastics-Determination of temperature of deflection under load-Part 1:General test method
- GB/T 3789.17-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of electrical intensity
Japanese Industrial Standards Committee (JISC), Test method for sphericity
AENOR, Test method for sphericity
- UNE 59535:2007 Footwear. Test methods for soles. Determination of global density.
- UNE 22339:1996 COAL DUST EXPLOSIVITY. TEST METHOD FOR DETERMINING THE MINIMUM EXPLOSIVE CONCENTRATION IN THE 20 l SPHERICAL CHAMBER.
- UNE-EN 993-2/A1:2004 Methods of test for dense shaped refractory products - Part 2 : Determination of true density
- UNE-EN 993-2:1996 Methods of test for dense shaped refractory products - Part 2: Determination of true density
- UNE 51127:1985 STANDARD TEST METHOD FOR WEAR PREVENTIVE CHARACTERISTICS OF LUBRICATING GREASE. (FOUR-BALL METHOD)
- UNE 34078:1974 TEST METHODS FOR CHOCOLATES. HUMIDITY DETERMINATION.
- UNE-EN 14621:2007 Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns
- UNE 11014:1989 TEST METHODS FOR DETERMINATION OF STRENGHT OF TABLES.
- UNE 11012:1989 TEST METHODS FOR DETERMINATION OF STRENGTH OF SETTEES.
国家市场监督管理总局、中国国家标准化管理委员会, Test method for sphericity
- GB/T 37406-2019 Detection method of degree of sphericity of spherical silica for electronic packaging—Particle dynamic photoelectric projection method
- GB/T 1634.1-2019 Plastics—Determination of temperature of deflection under load—Part 1:General test method
- GB/T 36655-2018 Test method for alpha crystalline silicon dioxide content of spherical silica powder for electronic packaging—XRD method
- GB/T 16900.2-2020 Rules for the presentation of graphical symbols—Part 2: Methods for testing comprehensibility
- GB/T 39688-2020 Test method for determining density of ceramic coatings
Korean Agency for Technology and Standards (KATS), Test method for sphericity
- KS K 0537-2019 Test method for tearing strength of cloth: Trapezoid method
- KS K 0350-2022 Test method for bursting strength of cloth: Ball bursting method
- KS F 2347-2018 Standard test method for insite density of soil by the rubber-balloon method
- KS M 2250-2019 Petroleum product — Testing method for softening point of bituminous materials(Ring and ball method)
- KS K 0608-2017 Test method for the shape retention of garments
- KS L 3403-1999(2019) Testing methods for screw precision of cylindrical machined graphite electrodes
- KS F 2478-2013(2018) Test method measuring changes in height of cylindrical specimens from hydraulic-cement mortar
- KS S ISO 9186-1-2014(2020) Graphical symbols — Test methods — Part 1: Methods for testing comprehensibility
- KS M 3065-2003 TESTING MATHOD FOR DEFLECTION TEMPERATURE OF RIGID PLASTICS UNDER LOAD
- KS M 3065-1982 TESTING MATHOD FOR DEFLECTION TEMPERATURE OF RIGID PLASTICS UNDER LOAD
- KS L 1606-1993 Testing method for wear resistance of high performance ceramics by ball-on-disk method
- KS M 3038-2006(2011) Test method for tensile heat distortion temperature of plastic sheeting
- KS K 0311-2018 Test method for length of cotton fibers: Fibrograph method
- KS K 0311-1985 Test method for length of cotton fibers: Fibrograph method
- KS E 3065-1996(2001) IRON ORES-DETERMINATION OF DENSITY
- KS E 3065-1974 IRON ORES-DETERMINATION OF DENSITY
- KS S ISO 9186-3:2016 Graphical symbols ─ Test methods Part 3: Method for testing symbol referent association
- KS M 7025-2022 Testing method for sizing degree of paper(Stöckigt method)
- KS F 2427-2010 Standard test method for determining the consistency of fresh concrete by Vebe test
- KS F 2427-1985 Standard test method for determining the consistency of fresh concrete by Vebe test
- KS M 7024-1995 Testing method for beating degree and freeness of pulp
- KS F 2432-2004 Testing method for consistency of mortar grouting
- KS L ISO 679-2006(2016) Methods of testing cements－Determination of strength
- KS L ISO 679-2006(2021) Methods of testing cements－Determination of strength
- KS F 2432-1986 Testing method for consistency of mortar grouting
IPC - Association Connecting Electronics Industries, Test method for sphericity
Canadian General Standards Board （CGSB), Test method for sphericity
SE-SIS, Test method for sphericity
RO-ASRO, Test method for sphericity
The American Road & Transportation Builders Association, Test method for sphericity
- AASHTO T 53-2008 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
- AASHTO T 140-1997 Standard Method of Test for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure
- AASHTO T 22-2007 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
- AASHTO T 53-2011 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
- AASHTO T 22-2010 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
- AASHTO T 22-2014 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
- AASHTO T 72-2010 Standard Method of Test for Saybolt Viscosity
Illuminating Engineering Society of North America, Test method for sphericity
- IESNA LM-81-2010 Approved Method for the Photometric Testing of Skylights and Tubular Daylighting Devices under Hemispherical Sky Conditions
- IESNA LM-78-2007 Method for Total Luminous Flux Measurement of Lamps Using an Integrating Sphere Photometer
International Organization for Standardization (ISO), Test method for sphericity
- ISO 23825:2020 Method for evaluating the nodularity of spheroidal carbides - Steels for cold heading and cold extruding
- ISO 2039-1:1987 Plastics — Determination of hardness — Part 1: Ball indentation method
- ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
- ISO 5725-3:1994 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method
- ISO 19983:2017 Rubber - Determination of precision of test methods
- ISO 679:1989 Methods of testing cements; determination of strength
- ISO 19983:2022 Rubber — Determination of precision of test methods
- ISO/DIS 19983:2023 Rubber — Determination of precision of test methods
Malaysia Standards, Test method for sphericity
VN-TCVN, Test method for sphericity
- TCVN 7124-2002 Leather.Determination of distension and strength of grain.Ball burst test
- TCVN 6016-2011 Cement.Test methods.Determination of strength
- TCVN 4030-2003 Cement.Test method for determination of fineness
Standard Association of Australia （SAA）, Test method for sphericity
- AS 3706.3:2012
- AS 3706.3:2000 Geotextiles - Methods of test - Determination of tearing strength - Trapezoidal method
- AS 2001.2.19:1988 Methods of test for textiles - Physical tests - Determination of bursting force of textile fabrics - Ball burst method
- AS 1141.28:1999 Methods for sampling and testing aggregates - Ball mill value
- AS 4046.1:2002 Methods of testing roof tiles - Determination of distortion
- AS 1683.12:2001 Methods of test for elastomers - Rubber, vulcanized or thermoplastic - Determination of tear strength (trouser, angle and crescent test pieces)
- AS 2341.18:2020 Methods of testing bitumen and related roadmaking products, Method 18: Determination of softening point (ring and ball method)
- AS 4046.1:2002(R2015)
- AS 4133.4.3:1993 Methods of testing rocks for engineering purposes - Rock strength tests - Determination of deformability of rock materials in uniaxial compression
- AS 2341.18:1992 Methods of testing bituminous and related roadmaking products - Determination of softening point (ring and ball method)
- AS 1012.3.1:2014 Methods of testing concrete, Method 3.1: Determination of properties related to the consistency of concrete — Slump test
- AS 4693.9:2004 Surfaces for sports areas - Methods of test - Determination of ball roll behaviour
- AS 4878.4:2001 Methods of test for coated fabrics - Determination of thickness
- AS 1733:1976 Methods for the determination of grain size in metals
Hebei Provincial Standard of the People's Republic of China, Test method for sphericity
- DB13/T 5591-2022 Rockwell hardness test method for forged (rolled) steel ball hardness
CU-NC, Test method for sphericity
- NC 41-46-1987 Leather. Determination of Starching Flexural Strength by Means of Bally Flexometer Testing Method
- NC 40-67-1984 Textiles. Determination of the Tendency to Pilling Formation Testing Method
German Institute for Standardization, Test method for sphericity
- DIN EN 951:1999-05 Door leaves - Method for measurement of height, width, thickness and squareness; German version EN 951:1998
- DIN 51917:2002-12 Testing of carbonaceous materials - Rockwell hardness test - Ball indentation method; Solid materials
- DIN EN ISO 75-1:2020-06 Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2020); German version EN ISO 75-1:2020
- DIN EN 14468-2:2015-05 Table tennis - Part 2: Posts for net assemblies - Requirements and test methods; German version EN 14468-2:2015
- DIN EN 993-2:1995-04 Methods of test for dense shaped refractory products - Part 2: Determination of true density; German version EN 993-2:1995
- DIN EN 14621:2006-03 Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns; German version EN 14621:2005
ES-UNE, Test method for sphericity
- UNE-EN 951:1999 Door leaves - Method for measurement of height, width, thickness and squareness
- UNE-EN 951:2000 ERRATUM DOOR LEAVES - METHOD FOR MEASUREMENT OF HEIGHT, WIDTH, THICKNESS AND SQUARENESS.
- UNE-EN ISO 75-1:2020 Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2020)
- UNE-EN ISO 16282:2008 Methods of test for dense shaped refractory products - Determination of resistance to abrasion at ambient temperature (ISO 16282:2007) (Endorsed by AENOR in June of 2008.)
- UNE-EN 14468-2:2016 Table tennis - Part 2: Posts for net assemblies - Requirements and test methods
- UNE-ISO 9186-3:2022 Graphical symbols — Test methods — Part 3: Method for testing symbol referent association
- UNE-ISO 19594:2022 Graphic technology. Test method for the determination of the binding strength for perfect-bound products. Page- pull test working upwards
- UNE 22338:1996 COAL DUST EXPLOSIBILITY. TEST METHOD FOR DETERMINING THE EXPLOSION'S PRESSURE AND THE RATE OF PRESSURE RISE IN THE 20 L SPHERICAL CHAMBER.
TR-TSE, Test method for sphericity
- TS 2401-1976 PLATICS AND EBON?TE — DETERMINATION OF HARDNESS BY THE BALL INDENTATION METHOD
CZ-CSN, Test method for sphericity
HU-MSZT, Test method for sphericity
AT-ON, Test method for sphericity
- ONORM ENV 1071-2-1993 Advanced technical ceramics. Methods of test for ceramic coatings. Part 2: Determination of coating thickness by the cap grinding method
- ONORM EN 108-1981 Methods of testing doors; Test of deformation of the leaf in its plane
- ONORM EN 196-6-1992 Methods of testing cement - Determination of fineness
- ONORM EN 129-1985 Methods of testing doors; fest for deformation in torsion of the door leaves
Indonesia Standards, Test method for sphericity
- SNI 1974-2011 Cara uji kuat tekan beton dengan benda uji silinder
- SNI 03-6429-2000 Test methods for compressive strength of concrete cylinders cast in place in cylindrical mold
- SNI 09-4406-1997 Test method of speedometers for motor cycles
- SNI ASTM D2783:2011 Standard test method for measurement of extreme-pressure properties of lubricating fluids (Four-Ball Method)
- SNI 13-6168-1999 Test methods of in situ uniaxial compressive strength for determining deformability and strength of weak rock
- SNI 6792-2008 Testing methods of soil density in the field by sleeve methods
American National Standards Institute （ANSI), Test method for sphericity
BELST, Test method for sphericity
- STB 2504-2017 Peat fuel briquettes. Method for determination of mechanical strength
工业和信息化部, Test method for sphericity
- YB/T 6040-2022 Method for determination of drop strength of fluorite pellets
KR-KS, Test method for sphericity
NZ-SNZ, Test method for sphericity
- NZS 4402.5.1.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.2: Balloon Densometer Method for the Determination of the In Situ Density
- AS/NZS 2001.4.4:1998 Methods of Test for Textiles Method 4.4: Colourfastness Tests - Determination of Colourfastness to Water Spotting (ISO 105-E07: 1989)
AASHTO - American Association of State Highway and Transportation Officials, Test method for sphericity
- T205-1986 Standard Method of Test for Density of Soil in-Place by the Rubber-Balloon Method (ASTM D2167-66 (R1984))
- T 205-1986 Standard Method of Test for Density of Soil In-Place by the Rubber-Balloon Method (Twentieth Edition; ASTM D2167-94; Discontinued)
- T 53-2009 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
- T 53-2008 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
- T 53-2006 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
- T 53-1992 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
- T 22-2003 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens (ASTM Designation: C 39-99)
- T 22-2007 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
- T 22-2014 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
- T 22-2010 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
- T 72-2010 Standard Method of Test for Saybolt Viscosity
YU-JUS, Test method for sphericity
- JUS B.H8.376-1982 Solid mineral fuels. Coal briguettes. Methods for the determination of mechanical strength
- JUS B.G8.152-1987 Methods of phisical testing of iron ores. tron ore pellets. Determination of crushing strength
IN-BIS, Test method for sphericity
RU-GOST R, Test method for sphericity
- GOST 8.506-1984 State system for ensuring the uniformity of measurements. Convex spherical mirrors. Measurement technique of curvature radius and local departures of surfaces forms from sphericity by holographic shear interferometry
- GOST 32657-2014 Polymer composites. Test methods. Determination of temperature of deflection under load
- GOST 29104.8-1991 Industrial fabrics. Method for determination of strength and strength under ball forcing
- GOST 4070-2000 Refractory products. Method for determination of refractoriness-under-load
- GOST 11262-1980 Plastics. Tensile strength test method
- GOST 17302-1971 Plastics. Method of test for shear strength
British Standards Institution (BSI), Test method for sphericity
- BS ISO 9186-1:2007 Graphical symbols. Test methods - Methods for testing comprehensibility
- BS EN 993-2:1995 Methods of test for dense shaped refractory products. Determination of true density
- BS EN 993-5:2018 Methods of test for dense shaped refractory products - Determination of cold crushing strength
- BS 3900-C6:2000 Methods of test for paints - Tests associated with paint film formation - Determination of fineness of grind
- BS 6663:1986 Methods for determination of crimp rigidity of textured nylon yarns
- BS EN 196-1:2005 Methods of testing cement - Determination of strength
- PD CEN ISO/TS 21083-2:2019 Test method to measure the efficiency of air filtration media against spherical nanomaterials. Size range from 3 nm to 30 nm
- DD CEN/TS 15405:2006 Solid recovered fuels — Methods for the determination of density of pellets and briquettes
- BS EN 993-12:1997 Methods of test for dense shaped refractory products. Determination of pyrometric cone equivalent (refractoriness)
- BS EN 595:1995 Timber structures - Test methods - Test of trusses for the determination of strength and deformation behaviour
- BS EN 196-6:1992 Methods of testing cement - Determination of fineness
- BS 812-2:1995 Testing aggregates - Methods for determination of density
- BS ISO 19983:2017 Rubber. Determination of precision of test methods
GOSTR, Test method for sphericity
- GOST R 57790-2017 Timber bearing structures. Methods of strength and deformability testing
- GOST 34371-2017 Plastics. Determination of temperature of deflection under load. Part 1. General test method
Professional Standard - Light Industry, Test method for sphericity
- QB/T 2712-2005 Leather-Physical and mechanical tests-Determination of distension and strength of grain-Ball burst test
GM Global, Test method for sphericity
- GMW 15680-2013 Bowed Panel Test Method, Low Angle Stress Issue 2; English
PL-PKN, Test method for sphericity
- PN P04754-1988 Jet-textured yarn of linear density belo w 1000 dtex Methods of tests
- PN B06086-1992 Methods of testing doors. Test for deformation in torsion of the door leaves
- PN C89286-05-1989 Polyethylene Iow density Methods of testing
Danish Standards Foundation, Test method for sphericity
- DS 1103-7:1988 Test methods for rigid flat sheets - Determination of dimensions, angular and form deviation
- DS/EN ISO 75-1:2013 Plastics - Determination of temperature of deflection under load - Part 1: General test method
- DS/EN 14468-2:2005 Table tennis - Part 2: Posts for net assemblies - Requirements and test methods
- DS 1103.7:1982 Test methods for rigid flat sheets — Determination of dimensions, angular and form deviations
- DS/EN 993-2/A1:2004 Methods of test for dense shaped refractory products - Part 2: Determination of true density
- DS/EN 993-2:1995 Methods of test for dense shaped refractory products - Part 2: Determination of true density
- DS/EN 14621:2006 Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns
Association Francaise de Normalisation, Test method for sphericity
- NF EN ISO 9073-4:2021 Nontissés - Méthodes d'essai - Partie 4 : détermination de la résistance à la déchirure par la méthode du trapèze
- NF ISO 19983:2022 Caoutchouc - Détermination de la fidélité des méthodes d'essai
- NF EN 196-6:2018 Méthodes d'essai des ciments - Détermination de la finesse
- NF T51-005-1:2013 Plastics - Determination of temperature of deflection under load - Part 1: general test method
- NF P21-381*NF EN 595:1995 Timber structures. Test methods. Test of trusses for the determination of strength and deformation behaviour.
- NF EN ISO 21083-1:2018 Méthode d'essai pour mesurer l'efficacité des médias de filtration d'air par rapport aux nanomatériaux sphériques - Partie 1 : spectre granulométrique de 20 nm à 500 nm
- NF EN 993-5:2018 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 5 : détermination de la résistance à l'écrasement
- NF EN 993-2:1995 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 2 : détermination de la masse volumique absolue.
- NF EN 993-2/A1:2004 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 2 : détermination de la masse volumique absolue
- NF P15-476:1990 Methods of testing cement. Determination of fininess.
- P18-550:1982 Aggregates. Fidelity of test methods.
- NF P15-435:2021 Cement testing methods - Determination of density
European Committee for Standardization (CEN), Test method for sphericity
- EN 595:1995 Timber structures - Test methods - Test of trusses for the determination of strength and deformation behaviour
- EN 196-6:1989 Methods of Testing Cement; Determination of Fineness
ZA-SANS, Test method for sphericity
PT-IPQ, Test method for sphericity
- NP 2337-1988 Methods of testing doors Test for deformation of the leaf in its plane
- NP 2331-1988 Methods of testing doors Measurement of defects of general flatness of door leaves
Military Standard of the People's Republic of China-General Armament Department, Test method for sphericity
- GJB 987.5-1991 Weather balloon test method for determination of bursting performance
SAE - SAE International, Test method for sphericity
- SAE AS6507-2015 Test Method and Limits for Bow Height of Aluminum Sheet Samples After Chemical Milling
IT-UNI, Test method for sphericity
- UNI EN ISO 75-1:2020 Plastics - Determination of temperature of deflection under load - Part 1: General test method
Society of Automotive Engineers (SAE), Test method for sphericity
- SAE AS6507-2021 Test Method and Limits for Bow Height of Aluminum Sheet Samples After Chemical Milling
Electronic Components, Assemblies and Materials Association, Test method for sphericity
- ECA EIA-448-20-1989 Method 20 Test Method for Electromechanical Components Test Method for Lens Face Touch Temperature
Lithuanian Standards Office , Test method for sphericity
- LST EN 14468-2-2005 Table tennis - Part 2: Posts for net assemblies - Requirements and test methods
- LST EN 993-2-2001 Methods of test for dense shaped refractory products - Part 2: Determination of true density
- LST EN 993-2-2002/A1-2004 Methods of test for dense shaped refractory products - Part 2 : Determination of true density
- LST EN 14621-2006 Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns
ETSI - European Telecommunications Standards Institute, Test method for sphericity
- ETR 049-1992 Advanced Testing Methods (ATM); State of Research in the Area of Formal Test Specification Methods
- TR 101 667-1999 Methods for Testing and Specification (MTS); Network Integration Testing (NIT); Interconnection; Reasons and Goals for a Global Service Testing Approach (V1.1.2)
CEN - European Committee for Standardization, Test method for sphericity
- PD CEN/TS 15405:2006 Solid recovered fuels - Methods for the determination of density of pellets and briquettes
ECIA - Electronic Components Industry Association, Test method for sphericity
Professional Standard - Electron, Test method for sphericity
BR-ABNT, Test method for sphericity
未注明发布机构, Test method for sphericity
- BS EN 993-2:1995(2004) Methods oftest for dense shaped refractory products — Part 2 : Determination oftrue density
GM Daewoo, Test method for sphericity
US-FCR, Test method for sphericity
- FCR COE CRD-C 62-69-1969 HANDBOOK FOR CONCRETE AND CEMENT METHOD OF TESTING CYLINDRICAL TEST SPECIMENS FOR PLANENESS AND PARALLELISM OF ENDS AND PERPENDICULARITY OF SIDES
ES-AENOR, Test method for sphericity
BE-NBN, Test method for sphericity
VE-FONDONORMA, Test method for sphericity
Alliance of Telecommunications Industry Solutions （ATIS), Test method for sphericity
ATIS - Alliance for Telecommunications Industry Solutions, Test method for sphericity
- 0500001-2011 High Level Requirements for Accuracy Testing Methodologies
- 0500001-2004 High Level Requirements for Accuracy Testing Methodologies
Professional Standard - Medicine, Test method for sphericity
- YY/T 0694-2008 Standard test method for measuring intrinsic elastic recoil of balloon-expandable stents