ZH
RU
ES
UV test concentration requirements
UV test concentration requirements, Total:95 items.
In the international standard classification, UV test concentration requirements involves: Protection against fire, Materials for aerospace construction, Plastics, Water quality, Air quality, Alarm and warning systems, Electrical wires and cables, Electrical engineering in general, Medical equipment, Installations in buildings, Glass, Radiocommunications, Electromagnetic compatibility (EMC), Wood, sawlogs and sawn timber.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, UV test concentration requirements
- GB 12791-1991 Performance requirements and test methods for point ultraviolet flame detectors
RU-GOST R, UV test concentration requirements
- GOST R 25645.338-1996 Polymeric materials for space technique. Requirements for ultraviolet radiation stability tests
- GOST IEC 61034-2-2011 Measurement of smoke density of cables burning under defined conditions. Part 2. Test procedure and requirements
- GOST R ISO 8638-1999 Extracorporeal blood circuit for haemodialysers, haemofilters and haemoconcentrators. Technical requirements and test methods
- GOST R ISO 10155-2006 Stationary source emissions. Automated monitoring of mass concentrations of solid particles. Performance characteristics, test methods and technical requirements
- GOST R 50016-1992 Electromagnetic compatibility of technical equipment. Frequency bandwidth and off-band emission requirements of radiotransmitters. Test and control methods
YU-JUS, UV test concentration requirements
- JUS N.M1.030-1983 Safety requirements. Appliances for skin treatment by ultra-violet and infra-red radiation. Particular technical conditions and tests
German Institute for Standardization, UV test concentration requirements
- DIN 19294-1:2020-08 Devices for the disinfection of water using ultraviolet radiation - Part 1: Devices equipped with UV low pressure lamps - Requirements and testing / Note: This standard is part of the DVGW body of rules.
- DIN 19294-1:2020 Devices for the disinfection of water using ultraviolet radiation - Part 1: Devices equipped with UV low pressure lamps - Requirements and testing
- DIN EN 482:2021-05 Workplace exposure - Procedures for the determination of the concentration of chemical agents - Basic performance requirements; German version EN 482:2021
- DIN 19294-3:2020-08 Devices for the disinfection of water using ultraviolet radiation - Part 3: Reference radiometers for devices equipped with UV low pressure lamps - Requirements and testing / Note: This standard is part of the DVGW body of rules.
- DIN 19294-3:2020 Devices for the disinfection of water using ultraviolet radiation - Part 3: Reference radiometers for devices equipped with UV low pressure lamps - Requirements and testing
- DIN EN 13528-2:2002-12 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 2: Specific requirements and test methods; German version EN 13528-2:2002
- DIN EN 13528-1:2002-12 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 1: General requirements; German version EN 13528-1:2002
- DIN EN 14897:2007-09 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing; German version EN 14897:2006+A1:2007
- DIN EN 50676:2020 Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods; German version EN 50676:2019
- DIN EN 1279-3:2018-10 Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances; German version EN 1279-3:2018
- DIN EN 13528-2:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 2: Specific requirements and test methods; German version EN 13528-2:2002
- DIN EN 13528-1:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 1: General requirements; German version EN 13528-1:2002
- DIN EN 45544-1:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods; German version EN 45544-1:1999
- DIN EN 45544-1:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods; German version EN 45544-1:2015
AT-ON, UV test concentration requirements
- ONORM M 5873-1-2001 Plants for the disinfection of water using ultraviolet radiation - Requirements and testing - Low pressure mercury lamp plants
- ONORM M 7535-3-1997 Testing of waste gases of furnace Systems - Measuring equipment for the determination of the 02-concentration - Requirements, testing, marking of conformity
- ONORM M 7535-2-1997 Testing of waste gases of furnace Systems - Measuring equipment for the determination of the C02-concentration - Requirements, testing, marking of conformity
- ONORM M 7535-4-1997 Testing of waste gases of furnace Systems - Measuring equipment for the determination of the CO-concentration - Requirements, testing, marking of conformity
- ONORM M 7535-7-1997 Testing of waste gases of furnace Systems - Measuring equipment for the determination of the NO-concentration - Requirements, testing, marking of conformity
- OENORM EN 482-2021 Workplace exposure - Procedures for the determination of the concentration of chemical agents - Basic performance requirements
Association Francaise de Normalisation, UV test concentration requirements
- NF X43-277:2021 Workplace exposure - Procedures for the determination of the concentration of chemical agents - Basic performance requirements
- NF EN 482:2021 Exposition sur les lieux de travail - Procédures pour déterminer la concentration d'agents chimiques - Exigences élémentaires relatives aux performances
- NF C23-676*NF EN 50676:2019 Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods
- NF EN 50676:2019 Appareils électriques utilisés pour la détection et la mesure de la concentration de gaz frigorigènes - Exigences de performance et méthodes d'essai
- NF EN 13528-1:2003 Qualité de l'air - Echantillonneurs par diffusion pour la détermination des concentrations des gaz et des vapeurs - Prescriptions et méthodes d'essai - Partie 1: prescriptions générales
- NF EN 13528-2:2003 Qualité de l'air ambiant - Échantillonneurs par diffusion pour la détermination des concentrations des gaz et des vapeurs - Exigences et méthodes d'essai - Partie 2 : exigences spécifiques et méthodes d'essai
- NF P41-605/IN1*NF EN 14897/IN1:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
- NF P41-605*NF EN 14897+A1:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
- NF X43-060-1*NF EN 13528-1:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1 : general requirements
- NF X43-060-2*NF EN 13528-2:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2 : specific requirements and test methods
- NF EN 1279-3:2018 Verre dans la construction - Vitrage isolant - Partie 3 : méthode d'essai à long terme pour le débit de fuite et prescriptions pour les tolérances de concentration en gaz
- NF EN 14897+A1:2007 Appareils de traitement d'eau à l'intérieur des bâtiments - Dispositifs utilisant des radiateurs à mercure et basse pression de rayonnement UV - Exigences de performance, de sécurité et essais
- NF EN 14897/IN1:2007 Appareils de traitement d'eau à l'intérieur des bâtiments - Dispositifs utilisant des radiateurs à mercure et basse pression de rayonnement UV - Exigences de performance, de sécurité et essais
- NF ISO 9957-2:1995 Fluides à dessin - Partie 2 : encres aqueuses autres que les encres de Chine - Prescriptions et conditions d'essai.
- NF EN 13528-3:2004 Qualité de l'air ambiant - Échantillonneurs par diffusion pour la détermination de la concentration des gaz et vapeurs - Exigences et méthodes d'essai - Partie 3 : guide pour la sélection, l'utilisation et la maintenance
- NF X43-060-3*NF EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3 : guide to selection, use and maintenance.
CH-SNV, UV test concentration requirements
- SN EN 482-2021 Workplace exposure - Procedures for the determination of the concentration of chemical agents - Basic performance requirements
Danish Standards Foundation, UV test concentration requirements
- DS/EN 482:2021 Workplace exposure – Procedures for the determination of the concentration of chemical agents – Basic performance requirements
- DS/EN 13528-2:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2: Specific requirements and test methods
- DS/EN 13528-1:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements
- DS/EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance
- DS/EN 45544-1:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods
IT-UNI, UV test concentration requirements
- UNI EN 482-2021 Workplace exposure - Procedures for the determination of the concentration of chemical agents - Basic performance requirements
Lithuanian Standards Office , UV test concentration requirements
- LST EN 482-2021 Workplace exposure - Procedures for the determination of the concentration of chemical agents - Basic performance requirements
- LST EN 13528-2-2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2: Specific requirements and test methods
- LST EN 13528-1-2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements
- LST EN 13528-3-2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance
- LST EN 45544-1-2001 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods
ES-UNE, UV test concentration requirements
- UNE-EN 482:2021 Workplace exposure - Procedures for the determination of the concentration of chemical agents - Basic performance requirements
- UNE-EN 50676:2019 Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods (Endorsed by Asociación Española de Normalización in February of 2020.)
- UNE-EN 1279-3:2019 Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances
- UNE-EN 45544-1:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods (Endorsed by AENOR in March of 2015.)
British Standards Institution (BSI), UV test concentration requirements
- BS EN 482:2021 Workplace exposure. Procedures for the determination of the concentration of chemical agents. Basic performance requirements
- BS EN 50676:2019 Electrical equipment used for detection and concentration measurement of refrigerant gases. Performance requirements and test methods
- BS EN 13528-1:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - General requirements
- 20/30403626 DC BS EN 482. Workplace exposure. Procedures for the determination of the concentration of chemical agents. General performance requirements
- BS EN 13528-2:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Specific requirements and test methods
- BS EN 14897:2006+A1:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
- 19/30392191 DC BS EN 50676. Electrical equipment used for detection and concentration measurement of refrigerant gases or SF6 Performance requirements and test methods.
- 18/30356945 DC BS EN 50676. Electrical equipment used for detection and concentration measurement of refrigerant gases or SF6. Performance requirements and test methods
- BS EN 13528-3:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Guide to selection, use and maintenance
- BS EN 13528-3:2003(2008) Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Guide to selection, use and maintenance
- BS EN 45544-1:2015 Tracked Changes. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. General requirements and test methods
- BS EN 1279-3:2018 Tracked Changes. Glass in building. Insulating glass units. Long term test method and requirements for gas leakage rate and for gas concentration tolerances
(U.S.) Plastic Pipe Association, UV test concentration requirements
- PPI TN-47-2013 POLYETHYLENE RESIN TESTING REQUIREMENTS TO SUPPORT ASTM D2513 UV EXPOSURE LIMITS OF POLYETHYLENE COMPOUND
European Committee for Electrotechnical Standardization（CENELEC）, UV test concentration requirements
- EN 50676:2019 Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods
- HD 606.2 S1-1992 Measurement of Smoke Density of Electric Cables Burning Under Defined Conditions Part 2: Test Procedure and Requirements
- EN 61034-2:2005 Measurement of smoke density of cables burning under defined conditions Part 2: Test procedure and requirements (Incorporates Amendment A1: 2013)
AENOR, UV test concentration requirements
- UNE-EN 13528-2:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2: Specific requirements and test methods
- UNE-EN 13528-1:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements
- UNE-EN 1279-3:2003 Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances.
- UNE-EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance
Korean Agency for Technology and Standards (KATS), UV test concentration requirements
- KS C IEC 61034-2:2003 Measurement of smoke density of cables burning under defined conditions-Part 2:Test procedure and requirements
- KS C IEC 61034-2:2013 Measurement of smoke density of cables burning under defined conditions－Part 2：Test procedure and requirements
未注明发布机构, UV test concentration requirements
- DIN/TS 19689:2022 Water conditioning equipment inside buildings - Reduction in concentration of microorganisms - Requirements for design, safety and testing / Note: This standard is part of the DVGW body of rules.
AT-OVE/ON, UV test concentration requirements
- OVE EN 50676-2021 Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods (german version)
CENELEC - European Committee for Electrotechnical Standardization, UV test concentration requirements
- PREN 50676-2019 Electrical equipment used for detection and concentration measurement of refrigerant gases or SF6 Performance requirements and test methods
- PREN 50676-2018 Electrical equipment used for detection and concentration measurement of refrigerant gases or SF6 Performance requirements and test methods
European Committee for Standardization (CEN), UV test concentration requirements
- EN 14897:2006+A1:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
- EN 13528-1:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 1: General requirements
- EN 13528-2:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 2: Specific requirements and test methods
- EN 45544-1:1999 Workplace Atmospheres - Electrical Apparatus Used for the Direct Detection and Direct Concentration Measurement of Toxic Gases and Vapours - Part 1: General Requirements and Test Methods
- EN 45544-1:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods
- EN 13528-3:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance
- EN 14081-2:2010+A1:2012 Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing
CZ-CSN, UV test concentration requirements
- CSN 34 7020-2-1995 Measurement of smoke density of electric cables burning under defined conditions Part 2: Test procedure and requirements
Military Standard of the People's Republic of China-General Armament Department, UV test concentration requirements
PL-PKN, UV test concentration requirements
- PN K02505-1993 Rolling stock. Concentration carbon monoxide and carbon dioxide emitted by pyrolysis or combustion of materials. Requirements and tests