ZH
RU
ES

Out-of-Plane Diffraction In-Plane Diffraction

Out-of-Plane Diffraction In-Plane Diffraction, Total:42 items.

In the international standard classification, Out-of-Plane Diffraction In-Plane Diffraction involves: Rubber and plastics products, Inorganic chemicals, Linear and angular measurements, Optical equipment, Products of the chemical industry, Aerosol containers, Components and accessories for telecommunications equipment.

Professional Standard - Energy, Out-of-Plane Diffraction In-Plane Diffraction

NB/SH/T 0339-2021 Determination of Unit Cell Parameters of Faujasite Molecular Sieve X-ray Diffraction Method

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Out-of-Plane Diffraction In-Plane Diffraction

ITU-R P.526-1-1982 Propagation by Diffraction - Section 5B - Effects of the Ground (Including Ground-Wave Propagation)

Professional Standard - Aviation, Out-of-Plane Diffraction In-Plane Diffraction

HB 20116-2012 Test method for residual stress analysis on aero-engine blade by x-ray diffraction

Group Standards of the People's Republic of China, Out-of-Plane Diffraction In-Plane Diffraction

T/CASAS 014-2021 Measuring method for basal plane bending of SiC substrate — High resolution X-ray diffractometry

IT-UNI, Out-of-Plane Diffraction In-Plane Diffraction

UNI 6966-1971

国家市场监督管理总局、中国国家标准化管理委员会, Out-of-Plane Diffraction In-Plane Diffraction

GB/T 39860-2021 Rapid identification of the surface residual mineral powder on latex products—X-ray diffraction spectrometry

American Society for Testing and Materials (ASTM), Out-of-Plane Diffraction In-Plane Diffraction

ASTM F3419-22 Standard Test Method for Mineral Characterization of Equine Surface Materials by X-Ray Diffraction (XRD) Techniques
ASTM D3906-03(2008) Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
ASTM D3906-97 Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
ASTM D3906-03(2013) Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
ASTM D3906-03 Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
ASTM E2872-14 Standard Guide for Determining Cross-Section Averaged Characteristics of a Spray Using Laser-Diffraction Instruments in a Wind Tunnel Apparatus
ASTM E2872-14(2019) Standard Guide for Determining Cross-Section Averaged Characteristics of a Spray Using Laser-Diffraction Instruments in a Wind Tunnel Apparatus

British Standards Institution (BSI), Out-of-Plane Diffraction In-Plane Diffraction

BS ISO 10110-16:2023 Optics and photonics. Preparation of drawings for optical elements and systems. Diffractive surfaces
BS ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium. Determination of alpha alumina content. Method using X-ray diffraction net peak areas
22/30430316 DC BS ISO 10110-16. Optics and photonics. Preparation of drawings for optical elements and systems - Part 16. Diffractive surfaces
BS EN IEC 61169-64:2019 Radio frequency connectors. Sectional specification. RF coaxial connectors with 0,8 mm inner diameter of outer conductor. Characteristic impedance 50 Ω (type 0,8)
BS EN IEC 61169-71:2022 Radio-frequency connectors - Sectional specification for RF coaxial connectors with inner diameter of outer conductor 5 mm. Characteristic impedance 50 Ohms. type NEX10®
BS EN IEC 61169-61:2020 Radio-frequency connectors - Sectional specification for RF coaxial connectors with 9,5 mm inner diameter of outer conductor, quick lock coupling, series Q4.1-9.5
BS EN IEC 61169-21:2022 Radio-frequency connectors - Sectional specification for RF connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with screw coupling. Characteristic impedance 50 ohms (Type SC)
BS EN IEC 61169-63:2020 Radio-frequency connectors - Sectional specification. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock. Characteristic impedance 75 ohms (type BNC75)
BS EN IEC 61169-17:2022 Radio-frequency connectors - Sectional specification for RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with screw coupling. Characteristic impedance 50 ohms (Type TNC)
18/30363078 DC BS EN 63136-1. Radio-frequency connectors. Part 61. Sectional specification for RF coaxial connectors with 9.5mm inner diameter of outer conductor with quick lock coupling series Q4.1-9.5
20/30414076 DC BS EN IEC 61169-71. Radio-frequency connectors. Part 71. Sectional specification for RF coaxial connectors with inner diameter of outer conductor 5,0 mm. Characteristic impedance 50Ω Ohms (type NEX10®)
19/30350395 DC BS EN IEC 61169-60. Radio-frequency connectors. Part 60. Sectional specifications RF coaxial connectors with inner diameter of outer conductors mm with Push on mating. Characteristics impedance 50 Ohm (type SMPM)

RU-GOST R, Out-of-Plane Diffraction In-Plane Diffraction

GOST R 8.696-2010 State system for ensuring the uniformity of measurements. Interplanar spacings in crystals and the intensity distribution in diffraction patterns. Method for measurement by means of an electron diffractometer

International Organization for Standardization (ISO), Out-of-Plane Diffraction In-Plane Diffraction

ISO/FDIS 10110-16 Optics and photonics — Preparation of drawings for optical elements and systems — Part 16: Diffractive surfaces
ISO 10110-16:2023 Optics and photonics — Preparation of drawings for optical elements and systems — Part 16: Diffractive surfaces
ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium - Determination of alpha alumina content - Method using X-ray diffraction net peak areas

German Institute for Standardization, Out-of-Plane Diffraction In-Plane Diffraction

DIN EN 61169-8:2007-11 Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristics impedance 50 ohms (type BNC) (IEC 61169-8:2007); German version EN 61169-8...

ES-UNE, Out-of-Plane Diffraction In-Plane Diffraction

UNE-EN 61169-8:2007 Radio-frequency connectors -- Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 ohms (type BNC) (IEC 61169-8:2007). (Endorsed by AENOR in Aug...
UNE-EN IEC 61169-64:2020 Radio frequency connectors - Part 64: Sectional specification - RF coaxial connectors with 0,8 mm inner diameter of outer conductor - Characteristic impedance 50 ¿ (type 0,8)
UNE-EN 61169-71:2023 Radio-frequency connectors - Part 71: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 5 mm - Characteristic impedance 50 Ohms - type NEX10®
UNE-EN IEC 61169-65:2021 Radio-frequency connectors - Part 65: Sectional specification for RF coaxial connectors, 1,35 mm inner diameter of outer conductor, with screw-coupling, characteristic impedance 50 O
UNE-EN 61169-11:2017 Radio-frequency connectors - Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9,5 mm with threaded coupling - Characteristic impedance 50 O (type 4,1-9,5) (Endorsed by Asociación Española de Normalizac...
UNE-EN IEC 61169-61:2020 Radio-frequency connectors - Part 61: Sectional specification for RF coaxial connectors with 9,5 mm inner diameter of outer conductor, quick lock coupling, series Q4.1-9.5
UNE-EN IEC 61169-66:2022 Radio-frequency connectors - Part 66: Sectional specification for RF coaxial connectors with 5 mm inner diameter of outer conductor, with quick-lock- or screw-coupling, characteristic impedance 50 O (series 2,2-5)
UNE-EN 61169-50:2015 Radio-frequency connectors - Part 50: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 4,11 mm with quick lock system - Characteristic impedance 50 Ohm (type QMA) (Endorsed by AENOR in April of 2015.)
UNE-EN IEC 61169-63:2020 Radio-frequency connectors - Part 63: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 75 ohms (type BNC75)
UNE-EN IEC 61169-21:2023 Radio-frequency connectors - Part 21: Sectional specification for RF connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with screw coupling - Characteristic impedance 50 ohms (Type SC)
UNE-EN IEC 61169-15:2021 Radio-frequency connectors - Part 15: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with threaded coupling - Characteristic impedance 50 O (type SMA)

Lithuanian Standards Office , Out-of-Plane Diffraction In-Plane Diffraction

LST EN IEC 61169-65:2021 Radio-frequency connectors - Part 65: Sectional specification for RF coaxial connectors, 1,35 mm inner diameter of outer conductor, with screw-coupling, characteristic impedance 50 ? (IEC 61169-65:2021)