ZH
RU
ES

Test the function of the temperature block

Test the function of the temperature block, Total:499 items.

In the international standard classification, Test the function of the temperature block involves: Solar energy engineering, Thermodynamics and temperature measurements, Aerospace electric equipment and systems, Plastics, Paints and varnishes, Rubber, On-board equipment and instruments, Non-destructive testing, Petroleum products in general, Protection against dangerous goods, Lubricants, industrial oils and related products, Interface and interconnection equipment, Geology. Meteorology. Hydrology, Plant and equipment for the food industry, Industrial automation systems, Test conditions and procedures in general, Galvanic cells and batteries, Fibre optic communications, Ceramics, Soil quality. Pedology, Pipeline components and pipelines, Products of the chemical industry, Electrical wires and cables, Valves, Refrigerating technology, Protection against fire, Road vehicles in general, Construction materials, Road engineering, Adhesives, Rubber and plastics products, Testing of metals, Coatings and related processes used in aerospace industry, Dentistry, Wastes, Glass, Bridge construction, Metalliferous minerals, Road vehicle systems, Inks. Printing inks, Kitchen equipment, Environmental testing, Fluid storage devices, Non-ferrous metals, Aerospace fluid systems and components, Protection of and in buildings, Heat treatment, Insulating materials, Fuels, Semiconductor devices, Waxes, bituminous materials and other petroleum products, Raw materials for rubber and plastics, Medical equipment, Installations in buildings, Refractories, Structure and structure elements, Analytical chemistry, Automatic controls for household use, Linear and angular measurements.


International Electrotechnical Commission (IEC), Test the function of the temperature block

  • IEC 61853-2:2016 Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and module operating temperature measurements
  • IEC 60172:1987/AMD2:2010 Test procedure for the determination of the temperature index of enamelled winding wires; Amendment 2

European Committee for Electrotechnical Standardization（CENELEC）, Test the function of the temperature block

  • EN 61853-2:2016 Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and module operating temperature measurements

Association Francaise de Normalisation, Test the function of the temperature block

  • NF C57-113-2*NF EN 61853-2:2017 Photovoltaic (PV) module performance testing and energy rating - Part 2 : spectral responsivity, incidence angle and module operating temperature measurements
  • NF EN 61853-2:2017 Essais de performance et caractéristiques assignées d'énergie des modules photovoltaïques (PV) - Partie 2 : mesurages de réponse spectrale, d'angle d'incidence et de température de fonctionnement des modules
  • NF EN 61853-1:2011 Essais de performance et caractéristiques assignées d'énergie des modules photovoltaïques (PV) - Partie 1 : mesures de performance en fonction de l'éclairement et de la température, et caractéristiques de puissance
  • NF E18-150*NF EN 12830:2018 Temperature recorders for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability
  • NF EN 12830:2018 Enregistreurs de température pour le transport, le stockage et la distribution des marchandises thermosensibles - Essais, performance, aptitude à l'emploi
  • NF EN ISO 2578:1998 Plastiques - Détermination des limites temps-températures après exposition à l'action prolongée de la chaleur
  • NF T46-009:1973 Determination of tension set under constant elongation of vulcanized elastomers at normal and elevated temperatures.
  • NF C31-410/A2:2010 Test procedure for the determination of the temperature index of enamelled winding wires.
  • NF L54-110-007*NF EN 4165-007:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 oC continuous - Part 007 : plug for 2 and 4 modules, series 3 - Product Standard
  • NF L54-113-002:2013 Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 oC, for EN 4531-101 contacts - Part 002: material
  • NF P75-449*NF EN 14706:2012 Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature
  • XP S31-018-1*XP ISO/TS 13471-1:2017 Acoustics - Temperature influence on tyre/road noise measurement - Part 1 : correction for temperature when testing with the CPX method
  • NF EN 13485:2002 Thermomètres pour le mesurage de la température de l'air et des produits pour le transport, l'entreposage et la distribution de denrées alimentaires réfrigérées, congelées, surgelées et des crèmes glacées - Essais, performance, aptitude à ...
  • NF L54-110-018:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 oC continuous - Part 018 : protective cover for receptacle 2 and 4 modules, series 2 and series 3 - Product standard.
  • NF S91-277*NF EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple
  • NF EN ISO 13078:2013 Médecine bucco-dentaire - Four dentaire - Méthode d'essai pour le mesurage de la température au moyen d'un thermocouple
  • NF L54-113-003*NF EN 4701-003:2013 Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 oC, for EN 4531-101 contacts - Part 003 : module series 2 - Product standard
  • NF L54-110-013*NF EN 4165-013:2017 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 oC continuous - Part 013 : cable clamp 2 and 4 modules for connectors, series 2 and series 3 - Product standard
  • NF EN 4165-013:2017 Série aérospatiale - Connecteurs électriques rectangulaires modulaires - Température d'utilisation 175 oC continu - Partie 013 : serre-câbles 2 et 4 modules pour connecteurs, série 2 et série 3 - Norme de produit
  • NF S76-020-13*NF ISO 16900-13:2016 Respiratory protective devices - Methods of test and test equipment - Part 13 : RPD using regenerated breathable gas and special application minig escape RPD : Consolidated test for gas concetration, tempature, humidity, work of breathing, breathing resis
  • NF L54-110-027*NF EN 4165-027:2016 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 oC continuous - Part 027 : rack and panel rear mounted plug for 2 and 4 modules, series 3 - Product standard
  • NF EN 4165-014:2006 Série aérospatiale - Connecteurs électriques, rectangulaires, modulaires - Température d'utilisation 175 oC continu - Partie 014 : accessoires durcis (corps) 2 et 4 modules pour connecteurs, série 2 et série 3 - Norme de produit
  • NF EN 4057-304:2007 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 304 : résistance à la rupture de la boucle à la température maximale d'utilisation
  • NF T46-045:1986 Rubber vulcanized. Determination of temperature rise and resistance to fatigue in compression flexometer testing.
  • NF EN 17643:2022 Bitumes et liants bitumineux - Détermination de la température d'équi-module de rigidité et de l'angle de phase à l'aide d'un rhéomètre à cisaillement dynamique (DSR) - Essai BTSV
  • NF EN 4165-018:2015 Série aérospatiale - Connecteurs électriques rectangulaires modulaires - Température d'utilisation 175 oC continu - Partie 018 : bouchon de vol pour toutes les embases série 2 - Norme de produit

AENOR, Test the function of the temperature block

  • UNE-EN 61853-2:2017 Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and module operating temperature measurements
  • UNE-EN 12390-2:2009 Testing hardened concrete - Part 2: Making and curing specimens for strength tests
  • UNE 28581:1986 AEROSPACE. FASTENERS. SELF-LOCKING NUTS WITH MAXIMUM OPERATING TEMPERTURE LESS THAN OR EQUAL TO 425oC. TEST METHODS.
  • UNE-EN 13485:2002 Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream. Tests, performance, suitability.
  • UNE-EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple (ISO 13078:2013)
  • UNE-EN 2155-13:1994 AEROSPACE SERIES. TEST METHODS FOR TRANSPARENT MATERIALS FOR AIRCRAFT GLAZING. PART 13: DETERMINATION OF TEMPERATURE AT DEFLECTION UNDER LOAD.
  • UNE-EN ISO 75-1:2013 Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013)

American Society for Testing and Materials (ASTM), Test the function of the temperature block

  • ASTM E3186-19 Standard Guide for Use and Testing of Dry-Block Temperature Calibrators
  • ASTM E1597-10 Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments
  • ASTM D6176M-97 Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors (Metric)
  • ASTM D7867-13(2020) Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature
  • ASTM D1349-99 Standard Practice for Rubber-Standard Temperatures For Testing
  • ASTM D1349-99(2005) Standard Practice for Rubber-Standard Temperatures for Testing
  • ASTM E639-78(1996)e1 Standard Test Method for Measuring Total-Radiance Temperature of Heated Surfaces Using a Radiation Pyrometer
  • ASTM E639-78(2002) Standard Test Method for Measuring Total-Radiance Temperature of Heated Surfaces Using a Radiation Pyrometer
  • ASTM D2879-83 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
  • ASTM D2879-86 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
  • ASTM D2879-18 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
  • ASTM D5133-99 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • ASTM D5133-19 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • ASTM D5133-20 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • ASTM D5133-20a Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • ASTM D5133-15 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • ASTM E337-15(2023) Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
  • ASTM E2683-17 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
  • ASTM E337-15 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
  • ASTM D7110-14 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
  • ASTM D7110-21 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
  • ASTM D7110-20 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
  • ASTM D7110-05 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
  • ASTM F1397-93(2005) Standard Test Method for Determination of Moisture Contribution by Gas Distribution System Components
  • ASTM E337-84(1996)e1 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
  • ASTM E337-02 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
  • ASTM D1929-16 Standard Test Method for Determining Ignition Temperature of Plastics
  • ASTM D1043-99 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
  • ASTM D1043-16 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
  • ASTM D1043-02 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
  • ASTM D1043-09 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
  • ASTM D5527-00(2011) Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means
  • ASTM E2683-09 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
  • ASTM D2983-09 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
  • ASTM D2983-15 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
  • ASTM E2602-22 Standard Test Methods for Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
  • ASTM E2602-09 Standard Test Method for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
  • ASTM E337-02(2007) Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
  • ASTM D2983-04a Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
  • ASTM D2983-04 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
  • ASTM D7110-05a(2011) Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
  • ASTM D4402-02 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
  • ASTM D4402/D4402M-12 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
  • ASTM D7110-05a Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
  • ASTM D1790-08 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
  • ASTM D4402/D4402M-15(2022) Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
  • ASTM D4402/D4402M-23 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
  • ASTM D4402/D4402M-15 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
  • ASTM D4402/D4402M-13 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
  • ASTM D1657-89 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Thermohydrometer
  • ASTM E2347-05 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
  • ASTM E2347-04 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
  • ASTM D2879-10 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
  • ASTM D4402-06 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
  • ASTM D7110-15 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
  • ASTM D6594-14 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135?deg;C
  • ASTM D5968-06(2013) Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121?deg;C
  • ASTM D5968-14 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121?deg;C
  • ASTM F1105-95(1999)e1 Standard Test Method for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing
  • ASTM F1105-09(2020) Standard Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing
  • ASTM D1790-02 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
  • ASTM D1790-99 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
  • ASTM D1790-14 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
  • ASTM D6011-96(2015) Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer
  • ASTM D4501-01(2023) Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
  • ASTM D1142-95 Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
  • ASTM D8503-23 Standard Test Method for Determining the Scuffing Temperature Limit of Lubricating Oils Using the SRV Test Machine
  • ASTM D5919-96(2017) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
  • ASTM E1545-00 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
  • ASTM E794-06 Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
  • ASTM E794-01 Standard Test Method for Melting and Crystallization Temperatures by Thermal Analysis
  • ASTM E1545-05 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
  • ASTM D4788-03(2007) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM D4788-88(1997) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM D3418-82(1988)e1 Standard Test Method for Transition Temperatures of Polymers By Thermal Analysis
  • ASTM E794-98 Standard Test Method for Melting and Crystallization Temperatures by Thermal Analysis
  • ASTM E794-06(2018) Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
  • ASTM E1824-08 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis
  • ASTM E794-06(2012) Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
  • ASTM D4045-99 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
  • ASTM D2983-01 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
  • ASTM D2983-87(1993) Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
  • ASTM D2983-03 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
  • ASTM D4741-06 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D2983-02 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
  • ASTM D2983-02a Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
  • ASTM D2983-02b Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
  • ASTM D4741-00 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D4741-96 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D4741-12 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D4741-13 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D7867-13 Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature
  • ASTM D6913-04 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
  • ASTM D6913-04e1 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
  • ASTM D6913-04(2009) Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
  • ASTM F2004-05 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
  • ASTM E1640-04 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
  • ASTM F2004-03 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
  • ASTM E1640-09 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
  • ASTM D2155-18 Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature
  • ASTM D4741-21 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D4741-18 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D4741-20a Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D4741-20 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D4741-17 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D6011-96(2008) Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer
  • ASTM D5133-05(2011) Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • ASTM D5133-12 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • ASTM E1356-03 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
  • ASTM D4788-03 Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM G179-04(2011) Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests
  • ASTM E1356-08 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
  • ASTM D746-07 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
  • ASTM D746-04 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
  • ASTM D746-13 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
  • ASTM A991/A991M-98 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
  • ASTM A991/A991M-08 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
  • ASTM A991/A991M-98(2004) Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
  • ASTM C1323-22 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
  • ASTM E208-17 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
  • ASTM E208-17e1 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
  • ASTM E208-95a Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
  • ASTM E208-19 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
  • ASTM E208-20 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
  • ASTM D5481-21 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
  • ASTM D5481-20 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
  • ASTM D5481-13(2020) Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
  • ASTM D5481-20a Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
  • ASTM E2009-02 Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
  • ASTM D1142-95(2000) Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
  • ASTM D1142-95(2021) Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
  • ASTM D3418-03 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
  • ASTM E1862-97e1 Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
  • ASTM E1862-97(2002)e1 Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
  • ASTM D6038-21 Standard Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point)
  • ASTM D6038-96 Standard Test Method for Determining the Compatability of Resin/Solvent Mixtures by Precipitation Temperature
  • ASTM A991/A991M-10 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
  • ASTM C1421-01b Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
  • ASTM E1824-18 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
  • ASTM E1824-19 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
  • ASTM E2716-09 Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
  • ASTM A991/A991M-17 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
  • ASTM D4419-90(2010) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
  • ASTM D3418-08 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
  • ASTM E1356-23 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
  • ASTM E1640-23 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
  • ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
  • ASTM D4683-09 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 &x00B0;C
  • ASTM D4683-13 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150?deg;C
  • ASTM C1323-96 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
  • ASTM C1368-18 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Strength Testing at Ambient Temperature
  • ASTM D5481-04 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
  • ASTM E1862-97(2010) Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
  • ASTM E2009-23 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
  • ASTM E1862-14 Standard Practice for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
  • ASTM E2009-08(2014)e1 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
  • ASTM C1113-99 Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
  • ASTM C1113-99(2004) Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
  • ASTM C1113/C1113M-09 Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
  • ASTM E1657-98(2011) Standard Practice for Testing Variable-Wavelength Photometric Detectors Used in Liquid Chromatography
  • ASTM D2983-19e1 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
  • ASTM D2983-17 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
  • ASTM D2983-19 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
  • ASTM D2983-16 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
  • ASTM D2983-20 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
  • ASTM E376-11 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing Methods

British Standards Institution (BSI), Test the function of the temperature block

  • BS EN 61853-2:2016 Photovoltaic (PV) module performance testing and energy rating. Spectral responsivity, incidence angle and module operating temperature measurements
  • BS EN 4830-003:2015 Aerospace series. Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4639-10X contacts. Module. Product standard
  • 22/30454351 DC BS EN 13485. Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods. Tests, performance, suitability
  • BS EN 4701-003:2013 Aerospace series. Connectors, optical, rectangular, modular,operating temperature 125°C, for EN 4531-101 contacts. Module series 2. Product standard
  • BS G 259:1996 Aircraft equipment. Environmental and operating conditions for airborne equipment. Humidity, temperature and pressure tests
  • PD ISO/TS 13471-1:2017 Acoustics. Temperature influence on tyre/road noise measurement. Correction for temperature when testing with the CPX method
  • BS EN 4165-022:2019 Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous - Insertion/extraction tool for removal of modules. Product standard
  • BS EN 4830-001:2015 Aerospace series. Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4639-10X contacts. Technical specification
  • BS EN 4830-002:2015 Aerospace series. Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4639-10X contacts. Specification of performance
  • BS 1902 Sec.4.6:1985 Methods of testing refractory materials. Properties measured under an applied stress. Determination of resistance to abrasion at ambient temperature (abradability index at ambient temperature) (method 1902-406)
  • BS 6043-3.6:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of electrical resistivity of cathode blocks and prebaked anodes at ambient temperature
  • BS EN ISO 2578:1993 Plastics - Determination of the time-temperature limits after prolonged exposure to heat
  • BS EN 4165-007:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 007: Plug for 2 and 4 modules, series 3 - Product standard
  • BS EN 4165-006:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 006: Plug for 2 and 4 modules, series 2 - Product standard
  • BS EN 12830:2018 Tracked Changes. Temperature recorders for the transport, storage and distribution of temperature sensitive goods. Tests, performance, suitability
  • BS EN 4165-013:2005 Connectors, electrical, rectangular, modular - Operating temperature 175 ℃ continuous - Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 - Product standard
  • BS EN 4165-013:2016 Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 C continuous. Cable clamp 2 and 4 modules for connectors, series 2 and series 3. Product standard
  • BS EN 4165-014:2005 Connectors, electrical, rectangular, modular - Operating temperature 175 ℃ continuous - Part 014: Shielded accessory body, 2 and 4 modules for connectors, series 2 and series 3 - Product standard
  • BS EN 14706:2012 Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature
  • BS EN 14706:2006 Thermal insulation products for building equipment and industrial installations. Determination of maximum service temperature
  • BS 6319-10:1987 Testing of resin and polymer/cement compositions for use in construction - Method for measurement of temperature of deflection under a bending stress
  • BS EN 4830-004:2015 Aerospace series. Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4639-10X contacts. Extraction tool. Product standard
  • BS EN 4165-004:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 004: Stackable mounting receptacle 2 and 4 modules, series 2 - Product standard
  • BS EN 4165-011:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 011: Flange mounting receptacle 2 and 4 modules, series 2 - Product standard
  • BS EN 4165-009:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 009: Rack and panel plug for 2 and 4 modules, series 3 - Product standard
  • BS EN 4165-008:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175°C continuous - Part 008: Rack and panel plug for 2 and 4 modules, series 2 -Product standard
  • BS EN ISO 14577-3:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
  • BS EN ISO 14577-3:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
  • BS EN 772-11:2000 Methods of test for masonry units - Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
  • BS EN 4165-018:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 018: Protective cover for receptacle 2 and 4 modules, series 2 and series 3 - Product standard
  • BS EN 4165-018:2015 Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 C continuous. Protective cover for all receptacles series 2. Product standard
  • 21/30439907 DC BS EN 4165-007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous - Part 007. Plug for 2 and 4 modules, series 3. Product standard
  • BS EN 4165-010:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 010: Rack and panel rear mounted plug for 2 and 4 modules, series 2 - Product standard
  • BS EN 4165-027:2015 Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Rack and panel rear mounted plug for 2 and 4 modules, series 3. Product standard
  • BS EN 14620-5:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Testing, drying, purging and cool-down
  • BS 1902 Sec.4.4:1984 Methods of testing refractory materials. Properties measured under an applied stress. Determination of modulus of rupture at ambient temperature (method 1902-404)
  • BS EN ISO 13078:2013 Dentistry. Dental furnace. Test method for temperature measurement with separate thermocouple
  • BS EN 17066-1:2019 Insulated means of transport for temperature sensitive goods. Requirements and testing - Container
  • 21/30439910 DC BS EN 4165-008. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous - Part 008. Rack and panel plug for 2 and 4 modules, series 2. Product standard
  • 21/30439913 DC BS EN 4165-009. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous - Part 009. Rack and panel plug for 2 and 4 modules, series 3. Product standard
  • 21/30445334 DC BS EN 4165-016. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous - Part 016. Double oval chimney for accessory (1 per 2 modules). Product standard
  • BS EN 14707:2012 Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature for preformed pipe insulation
  • BS EN 14707:2005+A1:2007 Thermal insulating products for building equipment and industrial installations — Determination of maximum service temperature for preformed pipe insulation
  • BS ISO 18096:2013 Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature for preformed pipe insulation
  • 19/30389671 DC BS EN ISO 75-1. Plastics. Determination of temperature of deflection under load. Part 1. General test method
  • BS 6043 Sec.4.9:1991 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of the cold crushing strength of baked rammed paste
  • 21/30439434 DC BS EN IEC 63215-5. Endurance test methods for die attach materials - Part 5. Temperature cycling test methods for die attach materials (system soldering interconnection) applied to module type power electronic devices
  • BS 6043-3.2:1997 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of density of cathode blocks and prebaked anodes
  • BS EN 772-11:2011 Methods of test for masonry units. Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry un
  • BS IEC 62047-27:2017 Semiconductor devices. Micro-electromechanical devices - Bond strength test for glass frit bonded structures using micro-chevron-tests (MCT)
  • 21/30445331 DC BS EN 4165-013. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous - Part 013. Cable clamp 2 and 4 modules for connectors, series 2 and series 3. Product standard
  • BS EN 13485:2001 Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability
  • BS EN 13485:2012 Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability
  • BS EN 13286-48:2005 Unbound and hydraulically bound mixtures - Test method for the determination of degree of pulverisation
  • BS EN 62788-1-6:2017+A1:2020 Measurement procedures for materials used in photovoltaic modules - Encapsulants. Test methods for determining the degree of cure in Ethylene-Vinyl Acetate
  • BS EN 302-3:2023 Adhesives for load-bearing timber structures. Test methods - Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
  • DD IEC/TS 62306:2006 Ultrasonics. Field characterisation. Test objects for determining temperature elevation in diagnostic ultrasound fields
  • 21/30439916 DC BS EN 4165-010. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous - Part 010. Rack and panel rear mounted plug for 2 and 4 modules, series 2. Product standard
  • BS EN 2155-14:1993 Test methods for transparent materials for aircraft glazing - Determination of the 1/10 Vicat softening temperature
  • 23/30468078 DC BS EN 4165-027. Aerospace series. Connector, electrical, rectangular, modular. Operating temperature 175 °C continuous - Part 027. Rack and panel rear mounted plug for 2 and 4 modules, series 3. Product standard

ESDU - Engineering Sciences Data Unit, Test the function of the temperature block

  • ESDU 84007 A-1991 The treatment of calibrations of total air temperature probes for use in flight-test analysis work.

RU-GOST R, Test the function of the temperature block

  • GOST R IEC 61853-1-2013 Photovoltaic modules. Determination of performance testing and energy rating. Part 1. Irradiance and temperature performance measurement according to irradiance and temperature. Power rating
  • GOST R 52075-2003 Bus serial interface of electronic modules system. Test-plan for interface modules, functioning as remote terminal. General requirements for test methods
  • GOST 33121-2014 Glued timber structures. Methods for determining the resistance of glue joints to the temperature and humidity effects
  • GOST R 52074-2003 Bus serial interface of electronic modules system. Test-plan for interface modules, functioning as bus controller. General requirements for test methods
  • GOST R 52073-2003 Bus serial interface of electronic modules system. Test-plan of interface modules, functioning as bus monitor. General requirements for test methods
  • GOST R 51765-2001 Bus serial interface for system of electronic modules. Validation test-plan interface module, functioning as remote terminal. General requirements for test methods
  • GOST R 51739-2001 Bus serial interface for system of electronic modules. Validation test-plan for interfacing module, functioning as bus controller. General requirements for test methods
  • GOST R ISO 11713-2014 Carbonaceous materials used in the production of aluminium. Cathode blocks and baked anodes. Determination of electrical resistivity at ambient temperature
  • GOST 11279.4-1983 Organic dyes. Testing method of colour fastness to reagents
  • GOST R 57744-2017 Ceramic composites. Determination of the interlaminar shear strength at ambient temperature by the compression of double-notched test pieces and by the Iosipescu test
  • GOST R IEC 811-5-1-1995 Test methods specific to filling compounds of electric cables. Drop-point. Separation of oil. Lower temperature brittleness. Total acid number. Absence of corrosive components. Permittivity at temperature 23 °C. D.c. resistivity at temperature 23 °C and 1
  • GOST R IEC 730-2-9-1994 Automatic electrical controls for household and similar use. Particular requirements for temperature sensing controls and test methods

YU-JUS, Test the function of the temperature block

  • JUS C.A4.034-1985 Mechanical testing of metals. Standardized blocks to be used for Brinell hardness testing machines machines
  • JUS U.J1.070-1986 Fire protection. Standard time-temperature curve in fire resistance test furnaces for constructions

PL-PKN, Test the function of the temperature block

  • PN M53802-1960 Thermometets for Te??lng Flash - Point by th? Marcus*on Me?hod
  • PN A86919-1960 Eatable vegetable fats. Testing methods. Deter- mination of the tempe- rature of softening point and of fuli clarification
  • PN M53801-1960 Thermomefers for Testing Flash-Poin? by the Abal- Pen$ky Me?hod
  • PN M42068-1989 Industrial automatics nd measurements emperatur? controller with directly ontinous action for internal- combustion engine e?uirements and tests
  • PN C13100-1970 Glass tubes for thermometers Specification and methods of test
  • PN M47029-1989 Earth-moving machinery tor onstruction purposes isibility at operators work location e?uirements and test methods
  • PN N84455-1992 Photography Slide projectors Determination of temperature rise in the picture area using a glass sandwich test slide

CZ-CSN, Test the function of the temperature block

  • CSN 25 0261-1967 Verification of standardized blocks *tu be used for Vickers hardness testing machines
  • CSN 25 0259-1967 Verification of standardized blocks tu be used for Brinell hardness testing machines
  • CSN 25 0260-1967 Verification of standardized blocks to be_ used for Rockwell B, C & A settle hardness testing machines
  • CSN 25 0271-1974 Calibration of standardized' blocks to be used for Rpckwell superficial N and T ?cale hardness testing machines
  • CSN 25 8322-1987 Combined temperature readers for atomik power stations of type VVBR 440. Testing methods during operating control
  • CSN 66 8506-1955
  • CSN 73 6670-1994 Testing with applying variable pressure and temperature verification of pipe-line systems
  • CSN 35 8071 Cast.13-1988 Variable resistors. Testing method of mechanical strength of operating shaft
  • CSN ISO 2736-2:1994 Concrete tests.Test specimens.Part 2:Making and curing of test specimens for strength test.
  • CSN ISO 410:1993 Metallic materials. Hardness test. Tables of brinell hardness values for use in tests made on flat surfaces
  • CSN 50 0259-1978 Pulp tcsling1. I)eUu'iuLnation of clilorine cousumptiou tu pulp (degree of delignification)

German Institute for Standardization, Test the function of the temperature block

  • DIN EN 13485:2022-08 Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability; German and English version prEN 13485:2022 / Note: Date of issue 2022-07-15*Int...
  • DIN EN ISO 2578:1998 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998
  • DIN EN 12830:2018 Temperature recorders for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability
  • DIN EN 12830:2018-10 Temperature recorders for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability; German version EN 12830:2018
  • DIN EN 4165-022:2020-04 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 022: Insertion/extraction tool for removal of modules - Product standard; German and English version EN 4165-022:2019
  • DIN 51105:2010 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Determination of flexural strength by the ring-on-ring test
  • DIN EN 61853-2:2017 Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and module operating temperature measurements (IEC 61853-2:2016); German version EN 61853-2:2016
  • DIN ISO/TS 13471-1:2022-01 Acoustics - Temperature influence on tyre/road noise measurement - Part 1: Correction for temperature when testing with the CPX method (ISO/TS 13471-1:2017)
  • DIN EN 4165-007:2008-10 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 007: Plug for 2 and 4 modules, series 3 - Product standard; German and English version EN 4165-007:2007 / Note: To be replaced by DIN EN 4...
  • DIN EN 4165-007:2022-02 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 007: Plug for 2 and 4 modules, series 3 - Product standard; English version prEN 4165-007:2021 / Note: Date of issue 2022-01-07*Intended a...
  • DIN 50011-12:1987 Artificial climates in technical applications; air temperature as a climatological quantity in controlled-atmosphere test installations
  • DIN 51398:1983-07 Testing of lubricants; procedure for measurement of low temperature apparent viscosity by means of the Brookfield viscometer (liquid bath method)
  • DIN EN 4165-022:2020 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 ？C continuous - Part 022: Insertion/extraction tool for removal of modules - Product standard; German and English version EN 4165-022:2019
  • DIN EN ISO 75-1:2020-06 Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2020); German version EN ISO 75-1:2020
  • DIN EN 12390-2:2019 Testing hardened concrete - Part 2: Making and curing specimens for strength tests
  • DIN EN 4165-005:2008 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 005: Stackable mounting receptacle 2 and 4 modules, series 3 - Product standard; German and English version EN 4165-005:2007
  • DIN EN 4165-004:2008 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 004: Stackable mounting receptacle 2 and 4 modules, series 2 - Product standard; German and English version EN 4165-004:2007
  • DIN EN 4165-009:2022-02 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 009: Rack and panel plug for 2 and 4 modules, series 3 - Product standard; English version prEN 4165-009:2021 / Note: Date of issue 2022-0...
  • DIN EN 4165-008:2022-02 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 008: Rack and panel plug for 2 and 4 modules, series 2 - Product standard; English version prEN 4165-008:2021 / Note: Date of issue 2022-0...
  • DIN EN 4165-014:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 014: Shielded accessory body, 2 and 4 modules for connectors, series 2 and series 3 - Product standard; German and English version EN 4165-014
  • DIN EN 4165-013:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 - Product standard; German and English version EN 4165-013:2005
  • DIN EN 13485:2002-02 Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Test, performance, suitability; German version EN 13485:2001 / Note: To be replaced...
  • DIN 51398:1983 Testing of lubricants; procedure for measurement of low temperature apparent viscosity by means of the Brookfield viscometer (liquid bath method)
  • DIN EN 4165-013:2022-04 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 - Product standard; English version prEN 4165-013:2021 / Note: Date...
  • DIN EN ISO 13078:2013-05 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple (ISO 13078:2013); German version EN ISO 13078:2013
  • DIN EN 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performance measurements and power rating (IEC 61853-1:2011); German version EN 61853-1:2011
  • DIN EN 4165-027:2016 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 ？C continuous - Part 027: Rack and panel rear mounted plug for 2 and 4 modules, series 3; German and English version EN 4165-027:2015
  • DIN EN 4165-010:2022-02 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 010: Rack and panel rear mounted plug for 2 and 4 modules, series 2 - Product standard; English version prEN 4165-010:2021 / Note: Date of...
  • DIN EN 4165-027:2016-01 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 027: Rack and panel rear mounted plug for 2 and 4 modules, series 3; German and English version EN 4165-027:2015
  • DIN EN 772-11:2011 Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay
  • DIN EN 4165-013:2017-02 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 - Product standard; German and English version EN 4165-013:2016 / N...
  • DIN 50157-1:2020-11 Metallic materials - Hardness testing with portable measuring devices operating with mechanical penetration depth - Part 1: Test method
  • DIN EN IEC 63215-5:2022-06 Endurance test methods for die attach materials - Part 5: Temperature cycling test methods for die attach materials (system soldering interconnection) applied to module type power electronic devices (IEC 91/1770/CD:2021); Text in German and English / N...
  • DIN EN 4165-018:2015-09 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 018: Protective cover for all receptacle series 2 - Product standard; German and English version EN 4165-018:2015
  • DIN EN 4165-010:2008-11 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 010: Rack and panel rear mounted plug for 2 and 4 modules, series 2 - Product standard; German and English version EN 4165-010:2007 / Note...
  • DIN EN 4165-027:2023-04 Aerospace series - Connector, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 027: Rack and panel rear mounted plug for 2 and 4 modules, series 3 - Product standard; English version prEN 4165-027:2023 / Note: Date of ...
  • DIN EN ISO 75-1:2020 Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2020)
  • DIN 53436-1:2015-12 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 1: Decomposition apparatus and determination of test temperature
  • DIN EN 4701-002:2013 Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4531-101 contacts - Part 002: Material; German and English version EN 4701-002:2013
  • DIN 50157-2:2020-11 Metallic materials - Hardness testing with portable measuring devices operating with mechanical penetration depth - Part 2: Verification and calibration of the testing devices
  • DIN EN 4165-014:2007-11 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 014: Shielded accessory body, 2 and 4 modules for connectors, series 2 and series 3 - Product standard; German and English version EN 4165...

SG-SPRING SG, Test the function of the temperature block

  • SS 78 Pt.A8-1987 Testing Concrete Part A8 : Method For Making Test Cubes From Fresh Concrete
  • SS 78 Pt.A10-1987 Testing Concrete Part A10 : Method For Making Test Cylinders From Fresh Concrete
  • SS 582-1-2013 Specification for thermal imagers for human temperature screening. Part 1: requirements and test methods

GOSTR, Test the function of the temperature block

  • GOST R 58888-2020 Soils. Field test method with the use of cone penetration with temperature measurement
  • GOST 34390-2018 Agricultural machinery. Machines for harvesting root crops tops. Test methods
  • GOST 34371-2017 Plastics. Determination of temperature of deflection under load. Part 1. General test method

HU-MSZT, Test the function of the temperature block

European Committee for Standardization (CEN), Test the function of the temperature block

  • EN 4830-003:2015 Aerospace series - Connectors@ optical@ rectangular@ modular@ operating temperature 125 �� for EN 4639-10X contacts - Part 003: Module - Product standard
  • EN 12830:2018 Temperature recorders for the transport@ storage and distribution of temperature sensitive goods - Tests@ performance@ suitability
  • EN ISO 2578:1998 Plastics - Determination of Time-Temperature Limits After Prolonged Exposure to Heat
  • EN 4165-006:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 006: Plug for 2 and 4 modules, series 2 - Product standard
  • EN 4165-007:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 007: Plug for 2 and 4 modules, series 3 - Product standard
  • prEN 772-17-1992 Methods of test for masonry units; part 17: determination of coefficient of water absorption of natural stone masonry units due to capillary action
  • EN 302-3:2013 Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
  • EN 302-3:2017 Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
  • EN 302-3:1992 Adhesives for load-bearing timber structures; test methods; part 3: determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
  • EN 4830-001:2015 Aerospace series - Connectors@ optical@ rectangular@ modular@ operating temperature 125 �� for EN 4639-10X contacts - Part 001: Technical specification
  • EN 4830-002:2015 Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4639-10X contacts - Part 002: Specification of performance
  • prEN 772-11-1992 Methods of test for masonry units; part 11: determination of water absorption of clay and aggregate concrete masonry units due to capillary action
  • EN 4701-002:2016 Aerospace series - Connectors@ optical@ rectangular@ modular@ operating temperature 125 �� for EN 4531-101 contacts - Part 002: Specification of performance
  • EN 4701-002:2013 Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 癈, for EN 4531-101 contacts - Part 002: Material
  • EN 4165-008:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 008: Rack and panel plug for 2 and 4 modules, series 2 - Product standard
  • EN 4165-004:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 004: Stackable mounting receptacle 2 and 4 modules, series 2 - Product standard
  • EN 4165-009:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 009: Rack and panel plug for 2 and 4 modules, series 3 - Product standard
  • EN 4165-011:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 011: Flange mounting receptacle 2 and 4 modules, series 2 - Product standard
  • EN 4165-005:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 Degrees C continuous - Part 005: Stackable mounting receptacle 2 and 4 modules, series 3 - Product standard
  • EN 4165-014:2005 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 014: Shielded accessory body, 2 and 4 modules for connectors, series 2 and series 3 - Product standard
  • EN 4165-018:2007 Aerospace series - Connectors, electrical, rectangular, modular Operating temperature 175 癈 continuous Part 018: Protective cover for receptacle 2 and 4 modules, series 2 and series 3 Product standard
  • EN 4830-004:2015 Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4639-10X contacts - Part 004: Extraction tool - Product standard
  • EN 4165-027:2015 Aerospace series - Connectors@ electrical@ rect angul ar@ modul ar - Operating temperature 175 ��continuous - Part 027: Rack and panel rear mounted plug for 2 and 4 modules@ series 3 - Product standard
  • EN 4165-013:2005 Connectors, electrical, rectangular, modular Operating temperature 175 degrees C continuous Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 Product standard
  • prEN 4165-009-2021 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 009: Rack and panel plug for 2 and 4 modules, series 3 - Product standard
  • EN ISO 75-1:1996 Plastics - Determination of Temperature of Deflection under Load - Part 1: General Test Method (ISO 75-1 : 1993)
  • EN ISO 75-1:2020 Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2020)
  • EN ISO 75-1:2013 Plastics - Determination of temperature of deflection under load - Part 1: General test method
  • EN ISO 15732:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method
  • EN 14187-1:2003 Cold applied joint sealants - Part 1:Test method for the determination of rate of cure
  • EN 14187-1:2017 Cold applied joint sealants - Test methods - Part 1: Determination of rate of cure
  • prEN 4165-010-2021 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 010: Rack and panel rear mounted plug for 2 and 4 modules, series 2 - Product standard
  • EN 1015-18:2002 Methods of test for mortar for masonry - Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Test the function of the temperature block

  • GB/T 11259-2015 Non-destructive testing.Practice for fabrication and control of steel reference blocks used in ultrasonic testing
  • GB/T 11259-2008 Non-destructive testing.Practice for fabrication and control of steel reference blocks used in ultrasonic testing
  • GB/T 1634.1-2004 Plastics-Determination of temperature of deflection under load-Part 1:General test method
  • GB/T 2424.7-2006 Environmental tests for electric and electronic products. Measurements in temperature chambers for tests A and tests B (with load)
  • GB/T 30806-2014 Thermal insulating products for building applications.Determination of dimensional stability under specified temperature and humidity comditions
  • GB/T 9291-1988 Surface active agents--Method of testing of the restraining effect of levelling agents for disperse dyes on dyeing polyester textiles under high temperature conditions

工业和信息化部, Test the function of the temperature block

  • JB/T 13463-2018 Preparation and inspection methods of oblique incidence test blocks for non-destructive testing and ultrasonic testing

RO-ASRO, Test the function of the temperature block

  • STAS 8078-1986 RUBBER Standard temperatures, humidities and endurance for conditioning and testing of test pieces

International Organization for Standardization (ISO), Test the function of the temperature block

  • ISO 2578:1993 Plastics; determination of time-temperature limits after prolonged exposure to heat
  • ISO/TS 13471-1:2017 Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method
  • ISO/CD 11713:2023 Carbonaceous materials used in the production of aluminium — Cathode blocks and baked anodes — Determination of electrical resistivity at ambient temperature
  • ISO 9047:1989 Building construction; sealants; determination of adhesion/cohesion properties at variable temperatures
  • ISO/TS 13471-2:2022 Acoustics — Temperature influence on tyre/road noise measurement — Part 2: Correction for temperature when testing with the pass-by methods
  • ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple

Indonesia Standards, Test the function of the temperature block

  • SNI 04-4189-1996 Operational condition for measuring and industrial process control instruments - Part 1: Temperature, humidity and barometric pressure
  • SNI 06-6441-2000 Test methods for viscosity of oil asphalt using Brookfield thermosel apparatus

SE-SIS, Test the function of the temperature block

  • SIS SS 11 03 31-1982 Hardness test - Brinell test - Indirect verification of testing machines using standardized blocks
  • SIS SS 11 03 36-1986 Hardness test - Rockwell test — Indirect verification of testing machines by means of standardized blocks
  • SIS SS 11 03 32-1982 Hardness test - Brinell test - Direct verification of standardizing machine for calibration of standardized blocks
  • SIS SS 11 03 41-1983 Hardness test - Vickers test HV 0,2 to HV 100- Indirect verification of testing machines using standardized blocks
  • SIS SS 11 03 42-1983 Hardness test - Vickers test HV 0,2 to HV 100 - Direct verification of standardizing machine for calibration of standardized blocks
  • SIS SS-ISO 7481:1985 Aerospace - Fasteners - Self-locking nuts with maximum operating tern pera- ture less than or equal to 425 °C - Test methods
  • SIS SS 11 03 37-1987 Metallic materials - Hardness test - Calibration of standardized blocks to be used for Rockwell Hardness testing machines. Scales A-B-C-D-E-F- G-H-K

Group Standards of the People's Republic of China, Test the function of the temperature block

  • T/GDCKCJH 057-2022 Technical performance and test method of polymer lithium-ion energy storage battery with wide temperature range for field operation

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Test the function of the temperature block

  • ASHRAE 4614-2003 Determining Undisturbed Ground Temperature for Thermal Responce Test

Standard Association of Australia （SAA）, Test the function of the temperature block

  • AS 1289.5.8.9:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using comparison against primary blocks
  • AS 1289.5.8.9:1998(R2013)
  • AS 1289.5.8.5:1998(R2013)
  • AS/NZS 2891.14.3:1999 Methods of sampling and testing asphalt - Field density tests - Calibration of nuclear thin-layer density gauge using standard blocks
  • AS 1289.5.8.8:1998(R2013)
  • AS 1289.5.8.6:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Assigned density of a Type B standard density block
  • AS 1289.5.8.8:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using proportion of water
  • AS 1289.5.8.5:1998 Methods of testing soils for engineering purposes - Soils compaction and density tests - Nuclear surface moisture-density gauges - Density of a Type A or Type C standard density block
  • AS 1289.5.8.7:1998(R2013)
  • AS 1289.5.8.7:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using hydrogen content of components
  • AS/NZS 4387.4:1996 Domestic kitchen assemblies - Methods of test - Determination of the strength of worktops and bottom surfaces

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Test the function of the temperature block

  • ASHRAE 17-2008 Method of Testing Capacity of Thermostatic Refrigerant Expansion Valves
  • ASHRAE 23.1-2010 Methods of Testing for Rating the Performance of Positive Displacement Refrigerant Compressors and Condensing Units that Operate at Subcritical Temperatures of the Refrigerant

American National Standards Institute （ANSI), Test the function of the temperature block

  • ANSI/ASHRAE 17-2008 Method of Testing Capacity of Thermostatic Refrigerant Expansion Valves
  • ANSI/ADA 163-2018 Dental Furnace – Part 1: Test Method for Temperature Measurement with Separate Thermocouple
  • ANSI/ASHRAE 23.1P-2010 Methods of Testing for Rating the Performance of Positive Displacement Refrigerant Compressors and Condensing Units That Operate at Subcritical Temperatures of the Refrigerant

Korean Agency for Technology and Standards (KATS), Test the function of the temperature block

  • KS M ISO 2578:2007 Plastics－Determination of time－temperature limits after prolonged exposure to heat
  • KS M 2450-2007(2022) Test method for low－temperature viscosity of automotive fluid lubricants measured by brookfield viscometer
  • KS M ISO 75-1-2015(2020) Plastics－Determination of temperature of deflection under load－Part 1：General test method
  • KS I ISO 17714:2020 Meteorology — Air temperature measurements —Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
  • KS P ISO 13078:2019 Dentistry — Dental furnace — Test method for temperature measurement with separate thermocouple
  • KS E 3031-1977 Methods of sampling of rock and preparation of test piece for strength test
  • KS R 1104-1991(2011) Shear strength test procedure for drum brake shoe assemblies and pads of automobiles
  • KS M 2450-2007(2017) Test method for low－temperature viscosity of automotive fluid lubricants measured by brookfield viscometer

API - American Petroleum Institute, Test the function of the temperature block

  • API TR 10TR3-1999 Technical Report on Temperatures for API Cement Operating Thickening Time Tests; 1993 Report from the API Task Group on Cementing Temperature Schedules (First Edition)

Danish Standards Foundation, Test the function of the temperature block

  • DS 438.13:1984 Test methods for the structural use of brickwork. Determination of the density and water absorption of a brick
  • DS/EN 4165-022:2006 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 022: Insertion/extraction tool for removal of modules - Product standard
  • DS/EN 12390-2:2013 Testing hardened concrete - Part 2: Making and curing specimens for strength tests
  • DS/EN 13485:2002 Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability
  • DS/EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple
  • DS/EN 4165-009:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 009: Rack and panel plug for 2 and 4 modules, series 3 - Product standard
  • DS/EN 4057-304:2007 Aerospace series - Cable ties for harnesses - Test methods - Part 304: Loop tensile strength at maximum working temperature
  • DS/EN 4165-013:2006 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 - Product standard
  • DS/EN 4165-010:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 010: Rack and panel rear mounted plug for 2 and 4 modules, series 2 - Product standard
  • DS/IEC/TS 62306:2007 Ultrasonics - Field characterisation - Test objects for determining temperature elevation in diagnostic ultrasound fields

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Test the function of the temperature block

  • PREN 4165-022-2001 Aerospace Series Connectors@ Electrical@ Rectangular@ Modular Operating Temperature 175 Degrees Celsius Continuous Part 022: Insertion/Extraction Tool for Removal Modules Product Standard (Edition 1E)
  • PREN 4057-304-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 304: Loop Tensile Strength at Maximum Working Temperature (Edition P 1)
  • PREN 4165-022-2016 Aerospace series Connectors@ electrical@ rectangular@ modular Operating temperature 175 °C continuous Part 022: Insertion/extraction tool for removal of modules Product standard (Edition P 2)
  • PREN 4165-009-2003 Aerospace series Connectors@ electrical@ rectangular@ modular Operating temperature 175 Degrees C continuous Part 009: Rack and Panel plug for 2 and 4 modules@ series 3 Product standard (Edition P 1)
  • PREN 4165-009-2001 Aerospace Series Connectors@ Electrical@ Rectangular@ Modular Operating Temperature 175 Degrees Celsius Continuous Part 009: Rack and Panel Plug for 2 or 4 Modules@ Series 3 Product Standard (Edition 1E)
  • PREN 4165-023-2001 Aerospace Series Connectors@ Electrical@ Rectangular@ Modular Operating Temperature 175 Degrees Celsius Continuous Part 023: Tooling for Assembly Receptacle Coding Component Product Standard (Edition 1E)

Lithuanian Standards Office , Test the function of the temperature block

  • LST EN 4165-022-2006 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 022: Insertion/extraction tool for removal of modules - Product standard
  • LST EN 12390-2-2009 Testing hardened concrete - Part 2: Making and curing specimens for strength tests
  • LST EN 13485-2002 Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability
  • LST EN 4165-009-2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 009: Rack and panel plug for 2 and 4 modules, series 3 - Product standard
  • LST EN 4057-304-2007 Aerospace series - Cable ties for harnesses - Test methods - Part 304: Loop tensile strength at maximum working temperature
  • LST EN 4165-013-2006 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 - Product standard
  • LST EN 4165-010-2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 010: Rack and panel rear mounted plug for 2 and 4 modules, series 2 - Product standard
  • LST EN ISO 75-1:2013 Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013)
  • LST EN ISO 75-1:2004 Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2004)

ES-UNE, Test the function of the temperature block

  • UNE-EN 4165-022:2019 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 022: Insertion/extraction tool for removal of modules - Product standard (Endorsed by Asociación Española de Normalización in December ...
  • UNE-EN ISO 75-1:2020 Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2020)
  • UNE-EN 4057-304:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 304: Loop tensile strength at maximum working temperature (Endorsed by AENOR in April of 2007.)
  • UNE-EN 4165-009:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 009: Rack and panel plug for 2 and 4 modules, series 3 - Product standard (Endorsed by AENOR in July of 2007.)
  • UNE-EN 4165-013:2016 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 - Product standard (Endorsed by Asociación Española de Normalizac...
  • UNE-EN 4165-027:2015 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 027: Rack and panel rear mounted plug for 2 and 4 modules, series 3 - Product standard (Endorsed by AENOR in January of 2016.)
  • UNE-EN 4165-010:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 010: Rack and panel rear mounted plug for 2 and 4 modules, series 2 - Product standard (Endorsed by AENOR in July of 2007.)
  • UNE-EN 4165-014:2005 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 014: Shielded accessory body, 2 and 4 modules for connectors, series 2 and series 3 - Product standard (Endorsed by AENOR in March of 2006.)

KR-KS, Test the function of the temperature block

  • KS I ISO 17714-2020 Meteorology — Air temperature measurements —Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
  • KS P ISO 13078-2019 Dentistry — Dental furnace — Test method for temperature measurement with separate thermocouple
  • KS M 2450-2007(2017)(英文版) Test method for low－temperature viscosity of automotive fluid lubricants measured by brookfield viscometer

CEN - European Committee for Standardization, Test the function of the temperature block

  • EN 302-3:2004 Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
  • PREN 12390-2-2017 Testing hardened concrete - Part 2: Making and curing specimens for strength tests

Japanese Industrial Standards Committee (JISC), Test the function of the temperature block

  • JIS C 8945:2009 Temperature coefficient measuring methods of output voltage and output current for multi-junction solar cells and modules
  • JIS A 1114:1993 Method of test for compressive strength of concrete using portions of beams broken in flexure
  • JIS H 7802:2005 Testing method of ultrafine metal particles for ignition temperature by differential thermal analysis
  • JIS R 1760:2016 Test method for fracture resistance of fine ceramics at room temperature by indentation fracture (IF) method
  • JIS K 7196:1991 Testing method for softening temperature of thermoplastics film and sheeting by thermomechanical analysis

ES-AENOR, Test the function of the temperature block

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Test the function of the temperature block

  • GB/T 34011-2017 Thermal insulation products for building applications—Determination of the pull-off resistance of external thermal insulation composite systems(ETICS)(foam block test)

Aerospace, Security and Defence Industries Association of Europe (ASD), Test the function of the temperature block

  • ASD-STAN PREN 4165-022-2016 Aerospace series Connectors@ electrical@ rectangular@ modular Operating temperature 175 ��continuous Part 022: Insertion/extraction tool for removal of modules Product standard (Edition P 2)
  • ASD-STAN PREN 4165-006-2003 Aerospace Series Connectors, Electrical, Rectangular, Modular Operating Temperature 175 Degrees C Continuous Part 006: Plug for 2 and 4 Modules Series 2 Product Standard (Edition P 1)
  • ASD-STAN PREN 4165-007-2003 Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 Degrees C continuous Part 007: Plug for 2 and 4 modules, series 3 Products standard (Edition P 1)
  • ASD-STAN PREN 4165-022-2003 Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 Degrees C continuous Part 022: Insertion/extraction tool for removal of modules Product standard (Edition P 1)
  • ASD-STAN PREN 4165-008-2003 Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 Degrees C continuous Part 008: Rack and panel plug for 2 and 4 modules, series 2 Product standard (Edition P 1)
  • ASD-STAN PREN 4165-009-2003 Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 Degrees C continuous Part 009: Rack and Panel plug for 2 and 4 modules, series 3 Product standard (Edition P 1)
  • ASD-STAN PREN 4165-010-2003 Aerospace Series Connectors, Electrical, Rectangular, Modular Operating Temperature 175 Degrees C Continuous Part 010: Rack and Panel Rear Mounted Plug 2 and 4 Modules, Series 2 Product Standard (Edition P 1)
  • ASD-STAN PREN 4165-016-2003 Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 Degrees C continuous Part 016: Double oval chimney for accessory (1 per 2 modules) Product standard (Edition P 1)
  • ASD-STAN PREN 4165-027-2014 Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 °C continuous Part 027: Rack and panel rear mounted plug for 2 and 4 modules, series 3 Product standard (Edition P 1)

未注明发布机构, Test the function of the temperature block

  • BS 4833:1986(1999) Schedule for Hygrometric tables for use in the testing and operation of environmental enclosures
  • BS 6319-9:1987(1999) Testing of resin compositions for use in construction — Part 9 : Method for measurement and classification of peak exotherm temperature

American Society of Mechanical Engineers (ASME), Test the function of the temperature block

NZ-SNZ, Test the function of the temperature block

  • NZS 4407.4.2.4:1991 Methods of sampling and testing road aggregates Test 4.2.4 Calibration of a nuclear surface moisture-density gauge using standard blocks

Institute of Electrical and Electronics Engineers (IEEE), Test the function of the temperature block

  • IEEE P2870/D4.4, April 2021 IEEE Draft Grip Test Method Guide for Fittings of High-Temperature, Low-Sag Overhead Conductor Under Tension and Electric Current Co-effect

国家市场监督管理总局、中国国家标准化管理委员会, Test the function of the temperature block

  • GB/T 1634.1-2019 Plastics—Determination of temperature of deflection under load—Part 1:General test method

IN-BIS, Test the function of the temperature block

  • IS 13867-1993 Rubber. Standard temperatures, humidities and times for the conditioning and time interval between vulcanization and tersting of test pieces
  • IS 9691-1980

European Association of Aerospace Industries, Test the function of the temperature block

  • AECMA PREN 3877-1997 Aerospace Series Metallic Materials Test Method Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis of Braze Alloys Edition P 1
  • AECMA PREN 3877-1993 Aerospace Series Test Method for Braze Alloys Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis

ZA-SANS, Test the function of the temperature block

  • SANS 14577-3:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks

Professional Standard - Energy, Test the function of the temperature block

  • NB/T 20292-2014 Test method for determination of reference temperature, T<下标0>, for ferritic steels in the ductile-to-brittle transition range for nuclear power plants

PT-IPQ, Test the function of the temperature block

  • NP EN 1108-2001 Flexible sheets for waterproofing Bitumen sheets for roof waterproofing Determination of form stability under cyclical temperature changes

IT-UNI, Test the function of the temperature block

CENELEC - European Committee for Electrotechnical Standardization, Test the function of the temperature block

  • EN 61023:1993 Marine Speed and Distance Measuring Equipment (SDME) - Operational and Performance Requirements - Methods of Testing and Required Test Results

AT-ON, Test the function of the temperature block

  • OENORM EN 4165-010-2021 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 010: Rack and panel rear mounted plug for 2 and 4 modules, series 2 - Product standard
  • ONORM EN 302-3-1992 Adhesives for load bearing timber structures - Test methods - Determination oi the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength

Military Standard of the People's Republic of China-General Armament Department, Test the function of the temperature block

  • GJB 2589.9A-2021 Test methods for physical and chemical properties of military leather fur Part 9: Determination of shrinkage temperature

  Test the function of the temperature block.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved