ZH
RU
ES

Three point flexural strength iso

Three point flexural strength iso, Total:116 items.

In the international standard classification, Three point flexural strength iso involves: Construction materials, Paper products, Earthworks. Excavations. Foundation construction. Underground works, Paper and board, Products of the chemical industry, Inorganic chemicals, Glass, Ceramics, Products of the textile industry, Electromechanical components for electronic and telecommunications equipment, Technical drawings.

TR-TSE, Three point flexural strength iso

TS 3284-1979 Flexnral Strength Of Concrete (Using Simple Beam With Third-Point Loading)
TS 3285-1979 Flexural Strength Of Concrete (Using Simple Beam With Center Point Loading)

Taiwan Provincial Standard of the People's Republic of China, Three point flexural strength iso

CNS 1233-1984 Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-point Loading)
CNS 1234-1984 Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-point Loading)

British Standards Institution (BSI), Three point flexural strength iso

BS ISO 11093-6:2007 Paper and board - Testing of cores - Determination of bending strength by the three-point method
19/30375027 DC BS ISO 23242. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
BS ISO 12986-1:2014 Carbonaceous materials used in the production of aluminium. Prebaked anodes and cathode blocks. Determination of bending/shear strength by the three-point method
BS ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
14/30288711 DC BS EN ISO 1288-3. Glass in building. Determination of the bending strength of glass. Part 3. Test with specimen supported at two points (four-point bending)
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
BS 6043-3.5.1:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method
BS EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations – Test 16c: Contact-bending strength
BS ISO 12986-2:2005 Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Determination of flexural strength by the four-point method
BS ISO 12986-2:2014 Carbonaceous materials used in the production of aluminium. Prebaked anodes and cathode blocks. Determination of flexural strength by the four-point method
14/30288714 DC BS EN ISO 1288-4. Glass in building. Determination of the bending strength of glass. Part 4. Testing of channel-shaped glass
14/30288705 DC BS EN ISO 1288-1. Glass in building. Determination of the bending strength of glass. Part 1. Fundamentals of testing glass

PL-PKN, Three point flexural strength iso

PN C82055-02-1991 Test methods of pressed carbon products Determination of flexural strength by three-point method

American Society for Testing and Materials (ASTM), Three point flexural strength iso

ASTM C78/C78M-18 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-21 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-16 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78-00 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78-94 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78-02 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D1635/D1635M-19 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM C293-00 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C293-07 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM C78-07 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C293-94 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM C293-02 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM C293-08 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM C293/C293M-16 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM D1635-00(2006) Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM D1635-00 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM D1635/D1635M-12 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM C1018-97 Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) (Withdrawn 2006)
ASTM D7972-14(2020) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature

AENOR, Three point flexural strength iso

UNE-ISO 11093-6:2017 Paper and board. Testing of cores. Part 6: Determination of bending strength by the three-point method

Association Francaise de Normalisation, Three point flexural strength iso

XP Q35-006*XP ISO 11093-6:1997 Paper and board. Testing of cores. Part 6 : determination of bending strength by the three-point method.
XP CEN/TS 15963:2014 Bitumes et liants bitumineux - Détermination de la température de résistance à la fissuration par un essai de flexion 3 points sur un barreau entaillé
NF C93-400-16-3*NF EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3 : mechanical tests on contacts and terminations - Test 16c : contact-bending strength
NF EN 658-5:2003 Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à température ambiante - Partie 5 : détermination de la résistance au cisaillement interlaminaire par essai de flexion sur appuis rapprochés (trois points)

Korean Agency for Technology and Standards (KATS), Three point flexural strength iso

KS F 2325-2002(2017) Testing method for flexural strength of soil－cement using simple beam with third point loading
KS F 2325-2002(2022) Testing method for flexural strength of soil－cement using simple beam with third point loading
KS M ISO 12986-1:2004 Carbonaceous materials used in the production of aluminium-Prebaked anodes and cathode blocks-Part 1:Determination of bending/shear strength by a three-point method
KS M ISO 12986-1:2013 Carbonaceous materials used in the production of aluminium－Prebaked anodes and cathode blocks－Part 1：Determination of bending/shear strength by a three-point method
KS M ISO 11093-6:2006 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS F 2408-1995 Method of test for flexural strength of concrete(Using simple beam with third-point loading)
KS F 2407-1968(1995) TESTING METHOD FOR FLEXURAL STRENGTH OF CONCRETE (USING SIMPLE BEAM WITH CENTER-POINT LOADING)
KS M ISO 12986-2:2011 Carbonaceous materials used in the production of aluminium-Prebaked anodes and cathode blocks-Part 2:Determination of flexural strength by the foru-point method
KS M ISO 12986-2:2016 Carbonaceous materials used in the production of aluminium－Prebaked anodes and cathode blocks－Part 2：Determination of flexural strength by the foru-point method
KS M ISO 12986-1-2004(2009) Carbonaceous materials used in the production of aluminium－Prebaked anodes and cathode blocks－Part 1：Determination of bending/shear strength by a three-point method

International Organization for Standardization (ISO), Three point flexural strength iso

ISO 11093-6:2005 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method
ISO 11093-6:1996 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method
ISO 12986-1:2000 Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 1: Determination of bending/shear strength by a three-point method
ISO 12986-1:2014 Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 1: Determination of bending/shear strength by the three-point method
ISO 1288-3:2016 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
ISO 12986-2:2005 Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 2: Determination of flexural strength by the four-point method
ISO 12986-2:2014 Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 2: Determination of flexural strength by the four-point method
ISO 12986-2:2009 Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocksPart 2:Determination of flexural strength by the four-point method

German Institute for Standardization, Three point flexural strength iso

DIN ISO 11093-6:2005 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN EN 1288-3:2000-09 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000 / Note: To be replaced by DIN EN ISO 1288-3 (2007-10).
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN ISO 2493-1:2023-02 Paper and board - Determination of bending resistance - Part 1: Constant rate of deflection (ISO 2493-1:2010)
DIN ISO 9177-3:1995 Mechanical pencils - Part 3: Black leads; bending strengths of HB leads; identical with ISO 9177-3:1994
DIN EN 60512-16-3:2009 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (IEC 60512-16-3:2008); German version EN 60512-16-3:2008

RU-GOST R, Three point flexural strength iso

GOST 32281.3-2013 Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)
GOST R ISO 12986-1-2014 Carbonaceous materials used in the production of aluminium. Prebaked anodes and cathode blocks. Part 1. Determination of bending/shear strength by a three-point method

The American Road & Transportation Builders Association, Three point flexural strength iso

AASHTO T 97-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
AASHTO T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
AASHTO TP19-1993 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) 2000 Edition

AASHTO - American Association of State Highway and Transportation Officials, Three point flexural strength iso

T 97-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
T 97-2003 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
TP19-1993 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) (Edition 1A)
T97-1986 Standard Specification for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) (Eighteenth Edition; ASTM C78-84)
T97-1997 Standard Specification for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) (Nineteenth Edition; ASTM C78-94)
T 97-1997 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) (HM-22; Part IIA; ASTM Designation C 78-94)
T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T177-1981 Standard Specification for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading) (Eighteenth Edition; ASTM C 293-79)
T 177-1997 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading) (HM-22; Part IIA; ASTM Designation: C 293-94)

American Gear Manufacturers Association, Three point flexural strength iso

AGMA 932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears
AGMA 93FTMS1-1993 Spur Gear Bending Strength Geometry Factors: A Comparison of AGMA and ISO Methods
AGMA 2003-B97-1997 Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel, and Spiral Bevel Gear Teeth
AGMA 908-B89-1989 Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur, Helical and Herringbone Gear Teeth
AGMA 908-B89-1989(R1999) Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur, Helical and Herringbone Gear Teeth Revision of AGMA 226.01

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Three point flexural strength iso

GB/T 22906.6-2008 Testing of cores.Part 6：Determination of bending strength by three-point method

Japanese Industrial Standards Committee (JISC), Three point flexural strength iso

JIS R 3111-3:2022 Glass in building -- Determination of the bending strength of glass -- Part 3: Test with specimen supported at two points (four-point bending)

KR-KS, Three point flexural strength iso

KS M ISO 11093-6-2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method

YU-JUS, Three point flexural strength iso

JUS N.R4.461-1990 Electromechanicai components for electronic equipment. Test methods. Test 16c: Contact bending strength

US-FCR, Three point flexural strength iso

FCR COE CRD-C 16-94-1997 HANDBOOK FOR CONCRETE AND CEMENT STANDARD TEST METHOD FOR FLEXURAL STRENGTH OF CONCRETE (USING SIMPLE BEAM WITH THIRD-POINT LOADING)

SE-SIS, Three point flexural strength iso

SIS SEN 24 50 10-1971 Crimped joints Electrical connections with limited tensile strength for copper conductors General requirements and testing

Aerospace, Security and Defence Industries Association of Europe (ASD), Three point flexural strength iso

ASD-STAN PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)
ASD-STAN PREN 2591-D16-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part D16 - Contact Bending Strength (Issue P 1)

Professional Standard - Non-ferrous Metal, Three point flexural strength iso

YS/T 63.14-2006 Carbonaceous materials used in the production of aluminium-Part 14:Determination of bending/shear strength by a three-point method
YS/T 63.14-2023 Carbonaceous materials used for the production of aluminium — Part 14:Determination of bending/shears strength — Three point method

IN-BIS, Three point flexural strength iso

IS 4332 Pt.6-1972

European Committee for Standardization (CEN), Three point flexural strength iso

DD ENV 658-5-1993 Advanced technical ceramics; mechanical properties of ceramic composites at room temperature; part 5: determination of shear strength by short span bend test (three-point)

AT-ON, Three point flexural strength iso

ONORM ENV 658-5-1993 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of shear strength by short span bend test (three-point)

European Committee for Electrotechnical Standardization（CENELEC）, Three point flexural strength iso

EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength

International Electrotechnical Commission (IEC), Three point flexural strength iso

IEC 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength

Danish Standards Foundation, Three point flexural strength iso

DS/EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)

Lithuanian Standards Office , Three point flexural strength iso

LST EN 658-5-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)