ZH

RU

ES

Four-electrode detection method

Four-electrode detection method, Total:500 items.

In the international standard classification, Four-electrode detection method involves: Characteristics and design of machines, apparatus, equipment, Vacuum technology, Earthworks. Excavations. Foundation construction. Underground works, Fibre optic communications, Lubricants, industrial oils and related products, Farming and forestry, General methods of tests and analysis for food products, Insulating fluids, Resistors, Analytical chemistry, Non-metalliferous minerals, Electronic tubes, Corrosion of metals, Soil quality. Pedology, Semiconductor devices, Welding, brazing and soldering, Pesticides and other agrochemicals, Materials for the reinforcement of composites, Fuel cells, Conducting materials, Optoelectronics. Laser equipment, Products of the chemical industry, Non-ferrous metals, Printed circuits and boards, Biology. Botany. Zoology, Test conditions and procedures in general, Semiconducting materials, Products of non-ferrous metals, Surface treatment and coating, Electronic components in general, Galvanic cells and batteries, Air quality, Road vehicles in general, Food products in general, Testing of metals, Non-destructive testing, Laboratory medicine, Integrated circuits. Microelectronics, Construction materials, Audio, video and audiovisual engineering, Television and radio broadcasting, Electrical and electronic testing, Electrical engineering in general, Tea. Coffee. Cocoa, Electricity. Magnetism. Electrical and magnetic measurements, Electronic display devices, Information sciences. Publishing, Components for electrical equipment, Plastics, Geology. Meteorology. Hydrology, Ceramics, Meat, meat products and other animal produce, Construction of waterways and ports, Solar energy engineering, Nuclear energy engineering, Extraction and processing of petroleum and natural gas, Electrical accessories, Powder metallurgy, Electromagnetic compatibility (EMC), Metalliferous minerals, Insulating materials, Mechanical testing, Ferroalloys, Installations in buildings, Telecommunication terminal equipment, Optics and optical measurements, Microbiology, Iron and steel products, Measurement of fluid flow, Electrical wires and cables, Shipbuilding and marine structures in general, Power stations in general, Medical equipment, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Rubber and plastics products, Metrology and measurement in general, Dentistry, Burners. Boilers, Terminology (principles and coordination), Equipment for the chemical industry, Equipment for petroleum and natural gas industries, Fluid storage devices, Rotating machinery, Water quality.


Group Standards of the People's Republic of China, Four-electrode detection method

  • T/CAIA YQ001-2016 Method of geometrical parameter measuring for quadrupole mass filte
  • T/QDAS 030-2019 Electrochemiluminescence detection of tertiary amines and polyamines based on graphene electrode
  • T/ZGIA 001-2019 Graphene test method for the determination of powder conductivity four-probe method
  • T/CIET 228-2023 Detection methods for retired lithium batteries
  • T/CESA 1054-2018 Test methods for Porous carbons for electrodes of supercapacitors
  • T/CASME 709-2023 Four-wheeled all-terrain vehicle safety performance inspection requirements and test methods
  • T/CASAS 019-2021 Test method for resistivity of micro and nano metal sintered compact: four probe method
  • T/CVIA 59-2016 Organic Light Emitting Diode (OLED) TV Measurement Methods
  • T/CVIA 11-2016 Organic Light Emitting Diode (OLED) TV Measurement Methods
  • T/CAAMTB 12-2020 Proton exchange membrane fuel cell membrane electrode test method
  • T/CSTM 00461-2022 Test method for electrode peel strength of crystalline silicon PV cells
  • T/MBJX 0004-2020 State of Charge Detection Method for Lithium-ion Power Batteries
  • T/CSTM 00665-2023 Non-destructive testing—Electromagnetic method to test gaps between two metal pieces
  • T/GDID 1024-2020 Method for measurement of energy efficiency of traction driven elevator
  • T/CASEI T101-2015 Rapid Test Method for Balance Factor of Lift
  • T/ESD 2005-2022 Measurement method for fractional voltage of planar materials
  • T/CMA JD022-2020 Detection Method of Electronic Snatching System of Black Smoke Vehicle
  • T/CSEE 0148-2020 Industrial CT detection method of transmission line components
  • T/CSTM 00213-2020 Non-destructive testing Method of electromagnetic ultrasonic guided wave detection for overhead transmission lines
  • T/CSTM 00209-2020 Non-destructive testing-The electromagnetic method for measuring magnetic particle suspension concentration
  • T/CEEIA 577-2022 Electrode for iron chromium flow battery technical requirements and test

国家市场监督管理总局、中国国家标准化管理委员会, Four-electrode detection method

  • GB/T 35049-2018 Vacuum technology—Leak testing method by quadrupole mass spectrometer
  • GB/T 37837-2019 General rules for quadrupole inductively coupled plasma mass spectrometry
  • GB/T 24488-2021 Test method for electrochemical properties of magnesium alloys sacrificial anode
  • GB/T 39429-2020 Non-destructive testing—Method for thermoelectric sorting of electrically conductive materials
  • GB/T 40362-2021 Powered toothbrushes—General requirements and test methods

Professional Standard - Agriculture, Four-electrode detection method

  • JAP-135 Tetramethazine detection method
  • JAP-136 Tetrazolinone detection method
  • JAP-174 Determination method of dextrotetradeconephenol
  • NY/T 2418-2013 Detection and identification of Callosobruchus maculatus (Fabricius)
  • JAP-143 Detection method of oxytetracycline, aureomycin and tetracycline
  • 4兽药残留检测标准操作规程-2008 Method for detection of tetracycline residues in milk-enzyme-linked immunosorbent assay
  • JAP-173 Detection methods of dextrotetradecanol, α-trenbolone and β-trenbolone
  • JAP-137 Detection method of rimsulfuron-methyl, clopyrazuron-methyl and rimsulfuron-methyl
  • NY/T 838-2004 Test method of Fluorine in tea - Electrode method for selection of Fluorine ion
  • GB 8058-1987 Permissible limits and detection methods for lead and cadmium dissolution in ceramic cookers
  • 5兽药残留检测标准操作规程-2008 Determination method of tetracycline drug residues in bovine, pig, chicken and fish tissues-enzyme-linked immunosorbent assay
  • 水产品质量安全检验手册 1.2.4.5-2005 Chapter 1 General introduction Section 2 Analytical methods for aquatic product inspection 4. Physicochemical analysis method (5) Potential analysis method
  • 33兽药残留检测标准操作规程-2008 Determination of Tetracycline Drug Residues in Chicken and Pork--High Performance Liquid Chromatography-Tandem Mass Spectrometry
  • 水产品质量安全检验手册 9.3.1.0-2005 Chapter IX Fishing Feed Inspection Section 3 Fishing Feed Routine Physical and Chemical Testing Methods 1. Determination of Fluorine in Fishing Feed--Ion Selective Electrode Method (GBT 13083-2002)

American Society for Testing and Materials (ASTM), Four-electrode detection method

  • ASTM G57-95a(2001) Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
  • ASTM G57-95A Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
  • ASTM G57-20 Standard Test Method for Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
  • ASTM G57-06 Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
  • ASTM D2783-03(2009) Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
  • ASTM D2596-20 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
  • ASTM D2783-19 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
  • ASTM D2783-03 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
  • ASTM D2783-88(1998) Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
  • ASTM D2783-21 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
  • ASTM D2596-14 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
  • ASTM D2783-03(2014) Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
  • ASTM D2596-15 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
  • ASTM D2596-10e1 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease 40;Four-Ball Method41;
  • ASTM D2783-03(2009)e1 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids 40;Four-Ball Method41;
  • ASTM D2596-10 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
  • ASTM G100-89(2004) Standard Test Method for Conducting Cyclic Galvanostaircase Polarization
  • ASTM G5-14(2021) Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
  • ASTM G5-94(2004) Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
  • ASTM G5-94(1999)e1 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
  • ASTM G59-97e1 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
  • ASTM G59-97(2009) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
  • ASTM G5-12 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
  • ASTM G5-94 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
  • ASTM G5-94(1999) Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
  • ASTM G5-14e1 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
  • ASTM G5-14 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
  • ASTM G59-97(2003) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
  • ASTM G59-97(2020) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
  • ASTM C1025-91(2000) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
  • ASTM G57-06(2012) Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
  • ASTM G187-18 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
  • ASTM G5-13e2 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
  • ASTM G5-13 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
  • ASTM G59-97(2014) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
  • ASTM G187-05 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
  • ASTM G187-12 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
  • ASTM G187-12a Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
  • ASTM D6745-06(2011) Standard Test Method for Linear Thermal Expansion of Electrode Carbons
  • ASTM D6745-01 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
  • ASTM D6745-06 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
  • ASTM G5-94(2011)e1 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
  • ASTM G59-23 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
  • ASTM D6120-97(2002) Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature
  • ASTM G5-13e1 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
  • ASTM D6120-97(2017)e1 Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature
  • ASTM C1025-91(2005) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
  • ASTM C1025-15(2020) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
  • ASTM D5806-95(2017) Standard Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration

Professional Standard - Post and Telecommunication, Four-electrode detection method

邮电部, Four-electrode detection method

Professional Standard - Geology, Four-electrode detection method

  • DZ/T 0064.5-1993 Groundwater Quality Inspection Method - Determination of pH Value by Glass Electrode Method
  • DZ/T 0064.54-1993 Groundwater Quality Examination Method Determination of Fluoride by Ion Selective Electrode
  • DZ/T 0064.16-1993 Groundwater Quality Examination Method Determination of Cadmium by Catalytic Polarography
  • DZ/T 0064.35-1993 Groundwater Quality Testing Method Determination of Lead by Catalytic Polarography
  • DZ/T 0064.41-1993 Determination of Zinc by Catalytic Polarography
  • DZ/T 0064.19-1993 Groundwater Quality Test Method Determination of Copper by Catalytic Polarography
  • DZ/T 0064.40-1993 Determination of Vanadium by Catalytic Polarography
  • DZ/T 0064.33-1993 Determination of Molybdenum by Catalytic Polarography
  • DZ/T 0064.37-1993 Determination of Selenium by Catalytic Polarography
  • DZ/T 0064.34-1993 Groundwater Quality Examination Method Determination of Nickel and Cobalt by Catalytic Polarography
  • DZ/T 0064.13-1993 Groundwater quality testing method for the determination of calcium by disodium ethylenediaminetetraacetic acid titration method
  • DZ/T 0064.14-1993 Groundwater quality testing method Determination of magnesium by ethylenediaminetetraacetic acid disodium titration method
  • DZ/T 0064.18-1993 Groundwater quality testing method Determination of total chromium and hexavalent chromium by catalytic polarography
  • DZ/T 0064.15-1993 Groundwater quality testing method - Determination of hardness by ethylenediaminetetraacetic acid disodium titration method
  • DZ/T 0064.6-2021 Analytical methods for groundwater quality - Part 6: Electrode method for the determination of electrical conductivity
  • DZ/T 0064.64-1993 Groundwater Quality Examination Method for Determination of Sulfate Radix by Disodium Ethylenediaminetetraacetic Acid-Barium Titration
  • DZ/T 0064.5-2021 Analytical methods of groundwater quality - Part 5: Determination of pH value by the glass electrode method

AENOR, Four-electrode detection method

  • UNE 51126:1987 STANDARD METHOD FOR MEASUREMENT OF EXTREME-PRESSURE PROPERTIES OF LUBRICATING GREASE (FOUR-BALL METHOD)
  • UNE 83988-2:2014 Concrete durability. Test methods. Determination of the electrical resistivity. Part 2: Four points or Wenner method.

CZ-CSN, Four-electrode detection method

Standard Association of Australia (SAA), Four-electrode detection method

  • AS 1141.4:1996 Methods for sampling and testing aggregates Method 4: Bulk density of aggregate

海关总署, Four-electrode detection method

国家质量监督检验检疫总局, Four-electrode detection method

Indonesia Standards, Four-electrode detection method

  • SNI ASTM D2783:2011 Standard test method for measurement of extreme-pressure properties of lubricating fluids (Four-Ball Method)
  • SNI 2417-2008 Testing methods for weathering aggregate by Los Angeles abration machine
  • SNI 03-6455.3-2000 Methods for measurement of discharge in open channels by quadrangular broad weir measuring structures
  • SNI 05-4006-1996 Eddy current examination method for installed nonferromagnetic heat exchanger tubing.
  • SNI 06-6876-2002 Test methods of ammonia content in water by ion selective electrode

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Four-electrode detection method

  • GB/T 3074.4-2003 Method for the determination of the coefficient of thermal expansion of graphite electrodes
  • GB/T 32264-2015 Method of performance testing for gas chromatography-single quadrupole mass pectrometry
  • GB/T 3789.2-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of current of anode and grid
  • GB/T 20444-2006 Method for the determination of tetracycline antibiotics in swine-tissue.Microbiological method
  • GB/T 7274-2015 Methods for the measurement of direct inter-electrode capacitances of electronic tubes and valves
  • GB/T 7274-1987 Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves
  • GB/T 3789.3-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of cathode emission current
  • GB/T 3789.4-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of reverse grids current
  • GB/T 3074.3-2008 Method for the determination of the oxidation resistance of graphite electrodes
  • GB/T 3074.3-1982 Method for determination of the oxidation resistance of graphite electrodes
  • GB/T 3789.12-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of interelectrode insulation
  • GB/T 3789.5-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of grid thermo-emission current
  • GB/T 26295-2010 Carbonaceous materials used in the production of aluminium.Prebaked anodes and cathode blocks.Determination of flexural strength by the four-point method
  • GB/T 3789.7-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of anode ion current
  • GB/T 3074.1-2008 Method for the determination of the flexure strength of graphite electrodes
  • GB/T 3074.2-2008 Method for the determination of the elastic modulus of graphite electrodes
  • GB/T 3074.2-1982 Method for determination of the elastic modulus of graphite electrodes
  • GB/T 3074.1-1982 Method for determination of the flexure strength of graphite electrodes
  • GB/T 3789.11-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of grid No3 cut-off voltage
  • GB/T 3789.10-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of grid No1 cut-off voltage
  • GB/T 3789.20-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of grid No1 current cut-off voltage
  • GB/T 41760-2022 Test method for spontaneous polarization of tourmaline
  • GB/T 3789.18-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of high frequency loss for interelectrode insulators
  • GB/T 16285-1996 Method for determination of glucose in food--Enzyme-colorimetric method and enzyme-electrode method
  • GB/T 26074-2010 Germanium monocrystal.Measurement of resistivity-DC linear four-point probe
  • GB/T 3789.9-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of maximum grid dissipation power
  • GB/T 3789.23-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of grid No3 control ability
  • GB/T 3074.4-2016 Method for the determination of the coefficient of thermal expansion of graphite electrodes
  • GB/T 26167-2010 Inspection method for electrical machine of special equipment
  • GB/T 26171-2010 Inspection method for electric wire and cable of special equipment
  • GB/T 3789.8-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of maximum anode dissipation power and anode overload dissipation power
  • GB 8058-2003 Standard permissible limits and testing method for release of lead or cadmium from ceramic cookware
  • GB/T 10267.1-1988 Method for analysis of calcium metal--The determination of chlorine content by chloride--Selective electrode
  • GB 10267.1-1988 Analytical method for calcium metal Determination of chlorine by chloride ion selective electrode method
  • GB/T 23729-2009 Photodiodes for scintillation detectors.Test procedures
  • GB/T 24300-2009 Test method of flaws of Cu-W contact
  • GB/T 42972-2023 Microwave circuit detector test method
  • GB/T 41704-2022 Test methods of cathode materials for lithium ion battery—Determination of magnetic impurities content and residual alkali content
  • GB/T 6730.28-1986 Methods for chemical analysis of iron ores--The ion-selective electrode method for the determination of fluorine content
  • GB/T 8151.9-1987 Methods for chemical analysis of zinc concentrates--The ion selective electrode method for the determination of fluorine content
  • GB/T 12967.6-2008 Test Methods for anodic oxidation coatings of aluminium and aluminium alloys.Part 6: Determination of color differences and appearance of colored anodic oxide films by viewing method
  • GB/T 24488-2009 Test method for electrochemical properties of magnesium alloys sacrificial anode
  • GB/T 15075-1994 Method for testing EPMA instrument
  • GB/T 21837-2008 Practice for electromagnetic examination of ferromagnetic steel wire rope
  • GB/T 42719-2023 Triboelectric voltage detection method for planar materials
  • GB/T 1819.15-2006 Methods for chemical analysis of tin concentrates. Determination of fluorine content. The ion-selective electrode method
  • GB/T 6904.1-1986 Methods for analysis of water for boiler and for cooling--The determination of pH--The glass electrode method
  • GB/T 32206-2015 Standard practice for testing electrolytic conductivity detectors used in gas chrometography
  • GB/T 12967.5-2013 Test methods for anodic oxidation coatings of aluminium and aluminium alloys.Part 5:Assessment of resistance of anodic oxidation coatings to cracking by deformation
  • GB/T 6987.27-2001 Aluminium and aluminium alloys--Determination of boron content--Ion selective electrode method
  • GB/T 14506.12-1993 Sillicate rocks. Determination of fluorine content. Ion selective electrode method
  • GB 11012-1989 Inspection procedures for electrical performance test equipments for solar cells
  • GB/T 31932-2015 Method for electromagnetic automatic ultrasonic testing for thicker steel plates
  • GB/T 20042.5-2009 Proton exchange membrane fuel cell.Part 5:Test method for membrane electrode assembly

RU-GOST R, Four-electrode detection method

  • GOST 21342.4-1987 Variable resistors. Test method for matching of the resistance law
  • GOST 27810-1988 Cathode-ray converter tubes. Measurement and control methods of parameters
  • GOST 19656.7-1974 Semiconductor UHF detector diodes. Measurement method of current sensitivity
  • GOST 20398.13-1980 Field-effect transistors. Drain source resistance measurement technique
  • GOST 18986.10-1974 Semiconductor diodes. Methods for measuring inductance
  • GOST 18986.4-1973 Semiconductor diodes. Methods for measuring capacitance
  • GOST 21011.2-1976 High-voltage kenotrons. The anode current measurement method within the voltage pulse
  • GOST 18604.4-1974 Transistors. Method for measuring collector reverse current
  • GOST 21815.6-1986 Image intensifier and image converter tubes. Method of checking useful diameter of the photocathode
  • GOST 21107.3-1975 Gas discharge devices. Decatrons. Polyatrons. Methods for measurement of electrical parameters
  • GOST 18604.15-1977 Bipolar microwave oscillator transistors. Techniques for measuring critical current
  • GOST 18986.6-1973 Semiconductor diodes. Method for measuring recovery charge
  • GOST 18604.10-1976 Transistors bipolar. Input resistance measurement technique
  • GOST 18986.24-1983 Semiconductor diodes. Measurement method of breakdown voltage
  • GOST 22091.13-1984 X-ray devices. The method of measuring of grid-cathode capacity
  • GOST 21815.8-1986 Image intensifier and image converter tubes. Method of measuring the limiting resolution
  • GOST 19656.1-1974 Semiconductor UHF mixer and detector diodes. Measurement method of voltage standing-wave ratio
  • GOST 18604.3-1980 Transistors bipolar. Methods for measuring collector and emitter capacitances
  • GOST 21803.3-1976 Vacuum enclosed prove tubes. Method of measurement of current of grid having positive potential with respect to cathode
  • GOST 19438.12-1975 Low-power electronic tubes and valves. Methods of measurement of plate current and currents of grids having positive potential
  • GOST 21011.5-1978 High-voltage kenotrons. Methods of measurement of cathode heatting time and readiness time controlling
  • GOST 18604.27-1986 Power high-voltage bipolar transistors. Collector-base (emitter-base) breakdown voltage measurement at emitter (collector) cut-off current
  • GOST 19438.2-1974 Low-power electronic tubes. Methods of measurement of direct interelectrode capacitances
  • GOST 18986.0-1974 Semiconductor diodes. Measuring methods for electrical parameters. General requirements
  • GOST 18604.6-1974 Transistors. Method for measuring emitter reverse current
  • GOST 21803.2-1976 Vacuum enclosed prove tubes. Methods of measurement of plate current of segment
  • GOST 21107.10-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for glow-discharge thyratrons and gas-filled rectifiers
  • GOST 21107.13-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for pulsed thyratrons and gas-filled rectifiers
  • GOST 19438.8-1975 Low-power electronic tubes and valves. Methods of measurement of current due to the cathode electron emission
  • GOST 11612.1-1981 Photomultipliers. Measuring method of catode luminous sensitivity
  • GOST 21011.3-1977 High-voltage kenotrons. Heater current measuring method
  • GOST 21011.7-1980 High-voltage kenotrons. The emission current measurement method
  • GOST 11612.17-1981 Phetomultiplirs. Methods of measuring spectral anode sensitivity
  • GOST 18986.1-1973 Semiconductor diodes. Method for measuring direct reverse current
  • GOST 20398.8-1974 Field-effect transistors. Drain current for V(Gs)=0 measurement technique
  • GOST 18485-1973 Modulator tubes for operation in pulse conditions. Methods for measurement of electrodes pulse voltages
  • GOST 21059.6-1979 Monochrome and colour TV picture tubes. Measurement techniques of heater current, anode current and cathode current
  • GOST 21107.8-1976 Gas discharge devices. Measuring methods of electrical characteristics of impulsive diodes
  • GOST 21107.9-1976 Gas-discharge devices. Methods of measurement of electrial parameters of pulse thyratrons
  • GOST 25995-1983 Electrodes for measurement of bioelectric potentials. General technical requirements and test methods
  • GOST 18986.14-1985 Semiconductor diodes. Methods for measuring differential and slope resistances
  • GOST 11612.2-1981 Photomultipliers. Measuring method of anode luminous sensitivity
  • GOST 20398.12-1980 Field-effect transistors. Drain residual current measurement technique
  • GOST 18720.18-1985 Television camera tubes. Methods of measuring insulation resistance and leakage cuvvent between electrodes
  • GOST 8.212-1984 State system for ensuring the uniformity of measurements. Measures of electromotive force. Standard cells. Calibration methods and facilities
  • GOST 8.255-2003 State system for ensuring the uniformity of measurements. Electrical capacity measures. Verification procedure
  • GOST 19785-1988 Cathode-ray tubes for reception. Methods for measurement and control of parameters
  • GOST 21342.3-1987 Variable resistors. Test methods for resistance law
  • GOST 21395.7-1975 Resistors variable. Test method for stop strength
  • GOST 21815.12-1986 Image intensifier and image converter tubes. Method of checking the image eccentricity
  • GOST 21815.15-1986 Image intensifier and image converter tubes. Method of checking the viewing area picture quality
  • GOST 8.255-1977 State system for ensuring the uniformity of measurements. Capasitance measures. Methods and means of calibration
  • GOST 19785-1974 Oscillographic electron-beam tubes. Methods for measurement of basic parameters
  • GOST 11612.6-1983 Photomultipliers. Measuring methods of light equivalent of anode dark current noise

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Four-electrode detection method

  • GB/T 34826-2017 Method of performance testing for quadrupole inductively coupled plasma mass spectrometer
  • GB/T 35410-2017 Method of performance testing for liquid chromatography-tandem quadrupole masss spectrometry
  • GB/T 33210-2016 Non-destructive testing—Test method for determining residual stresses by electromagnetic technology
  • GB/T 35392-2017 Non-destructive testing—Test method for determining electrical conductivity using the electromagnetic (eddy-current) method

Taiwan Provincial Standard of the People's Republic of China, Four-electrode detection method

  • CNS 14811-2004 Method of test for field measurement of soil resistivity using the Wenner four-electrode method
  • CNS 5764-1980 Voltage Regulator Diode Noise Voltage Measurement

Professional Standard - Electron, Four-electrode detection method

  • SJ 1230-1977 Methods of measurement for high frequency rectified current of germanium detector diodes
  • SJ 1388-1978 Methods of measurement for anode conductance of noise-generator diodes
  • SJ/Z 9009-1987 Methods for measurement of direct interelectrode capacitances of electronic tubes and valves
  • SJ 1389-1978 Methods of measurement for diodes leakage current between electrodes of noise-generator diodes
  • SJ 2140-1982 Methods of measurement for limiting voltage of silicon current regulator diodes
  • SJ/T 31122-1994 Requirements of readiness and methods of inspection and assessment for four-point probes
  • SJ/T 2354-2015 Measuring methods for photodiodes of PIN、APD
  • SJ/T 2354-2015/0352 Measuring methods for photodiodes of PIN、APD
  • SJ 2658.4-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for capacitance
  • SJ/Z 1171-1977 Methods for determination of polarization curve of electroplating solution
  • SJ 2354.5-1983 Method of measurement for capacitance of PIN and avalanche photodiodes
  • SJ 2658.3-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for backward voltage
  • SJ 2214.6-1982 Method of measurement for collector-emitter reverse breakdown voltage of semiconductor phototransistors
  • SJ 364-1973 Measurement of cathode current of reflex klystrons
  • SJ 2354.3-1983 Method of measurement for dark current of PIN and avalanche photodiodes
  • SJ 444-1973 Methods of measurement for anode current and anode current on underheated condition of high-voltage rectifier tubes
  • SJ 421-1973 Methods of measurement for leakage current between last anode and each electrode of low noise travelling wave tubes
  • SJ 431-1973 Methods of measurement for voltages and currents of O-type backward-wave tube on per-electrodes
  • SJ 2138-1982 Methods of measurement for regulated current of silicon current regulator diodes
  • SJ 2141-1982 Methods of measurement for breakdown voltage of silicon currenet regulator diodes
  • SJ 363-1973 Measurement of reflector total current, reflector ion current and reflector leakage current of reflex klystrons
  • SJ 2658.5-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for forward series resistance
  • SJ 2215.7-1982 Method of measurement for collector-emitter reverse breakdown voltage of semiconductor photocouplers (diodes)
  • SJ/T 2214-2015 Measuring methods for semiconductor photodiode and phototransistor
  • SJ 2354.1-1983 General procedures of measurement for electrical and optical parameters of PIN and avalanche photodiodes
  • SJ 420-1973 Methods of measurement for voltages and currents on per-electrode of low noise travelling wave tubes
  • SJ 2354.6-1983 Method of measurement for responsivity of PIN and avalanche photodiodes
  • SJ 455-1973 Methods of measurement for static interelectrode capacitance of high-voltage rectifier tubes
  • SJ 1718-1981 Measurement of cathode pulse current of power klystrons
  • SJ 366-1973 Measurement of interelectrode leakage current of reflex klystrons
  • SJ 2354.13-1983 Method of measurement for multiplication factor of PIN and avalanche photodiodes
  • SJ 2214.3-1982 Method of measurement for dark current of semiconductor photodiodes
  • SJ 2214.5-1982 Method of measurement for junction capacitance of semiconductor photodiodes
  • SJ 2214.8-1982 Method of measurement for dark current voltage of semiconductor phototransistors
  • SJ/T 11345-2006 Methods of measurement for digital television cathode ray tube displays
  • SJ/T 10163-1991 Critical frquency mesurement methods for electronic equipments
  • SJ 1387-1978 Methods of measurement for filament current and filament voltage of noise-generator diodes
  • SJ 2354.2-1983 Method of measurement for reverse break-down voltage of PIN and avalanche photodiodes
  • SJ 2354.4-1983 Method of measurement for forward voltage drop of PIN and avalanche photodiodes
  • SJ 2142-1982 Methods of measurement for current temperature coefficient of silicon current regulator diodes
  • SJ 966-1975 Methods of measurement for reverse breakdown voltage of silicon switching diodes
  • SJ 2214.10-1982 Method of measurement for light current of semiconductor photodiodes and phototransistors
  • SJ/T 11061-1996 Inspection method of solar cell electrical performance testing equipment
  • SJ 1395-1978 Methods of measurement for anode current and tube voltage drop of gas discharge noise tubes
  • SJ/T 31178-1994 Requirements of readiness and methods of inspection and assessment for pan/belt electron gun cathode laser welding machines
  • SJ/T 31314-1994 Requirements of readiness and methods of inspection and assessment for polar plate battery production process facilities
  • SJ 1391-1978 Methods of measurement for voltage standing wave ratio on cold conditions of noise-generator diodes
  • SJ 1393-1978 Methods of measurement for cathode preheating time of gas discharge noise tubes
  • SJ 2354.14-1983 Method of measurement for excess noise factor of PIN and avalanche photodiodes
  • SJ 2215.6-1982 Method of measurement for junction capacitance of semiconductor photocouplers (diodes)

Professional Standard - Commodity Inspection, Four-electrode detection method

  • SN/T 3872-2014 Detection of four pathogens in food for export.MALDI-TOF-MS method
  • SN/T 1787-2006 Determination of the metaldehyde in meta for import and export - Gas chromatography method
  • SN/T 2011-2007 Electronic (capacitive) testing method for raw silk
  • SN/T 4264-2015 Determination of metaldehyde residue in foodstuffs for export.GC-MS method
  • SN/T 3580-2013 Multiplex real-time fluorescent PCR detection method for four dangerous soybean fungi
  • SN/T 2645-2010 Determination of tetraconazole residues in food for import and export.GC-MS method
  • SN/T 3610-2013 Test method to determine temperature rise of electric toys
  • SN/T 4241-2015 Determination of tetrabromobisphenol A in electrical and electronic equipment.Gas chromatography/electron capture detector
  • SN/T 1740-2006 Determination of clofentezine residues in foods for import and export--Gas chromatography mass spectrometry method
  • SN/T 3723-2013 Test method of radiation of laser and light emitting diode in toys
  • SN/T 1840-2006 Method for detection of plant viruses by immuno-electron microscopy
  • SN/T 2309-2009 Determination of tetracyclines residues in milk and diary products for import and export.Radio-receptor method
  • SN/T 2800-2011 Liquid chromatography-mass spectrometry/mass spectrometry method for the detection of tetracycline veterinary drug residues in royal jelly for import and export

Korean Agency for Technology and Standards (KATS), Four-electrode detection method

  • KS B 0891-1974 Method of test for fillet weld of covered electrode
  • KS B 0892-2021 Method of deposition rate measurement for coated electrodes
  • KS D 0260-1999 TESTING METHODS OF RESISTIVITY FOR SINGLE CRYSTAL SILICON WAFERS WITH FOUR-POINT PROBE
  • KS C 6050-1985(2000) MEASURING METHODS FOR BIPOLAR DIGITAL INTEGRATED CIRCUITS
  • KS C 6050-1985 MEASURING METHODS FOR BIPOLAR DIGITAL INTEGRATED CIRCUITS
  • KS C 6991-2013 TEST METHODS OF PHOTODIODES FOR FIBER OPTIC TRANSMISSION
  • KS B 0892-1971 Method of deposition rate measurement
  • KS F 2736-2015 Testing method for polarization resistance of reinforcing bar in concrete
  • KS L 1619-2013(2018) Testing methods for resistivity of conductive fine ceramic thin films with four point probe array
  • KS D 8503-1995 Measurement methods of polarization resistance of copper alloy tubes for condenser
  • KS C 2712-2001 Test methods of negative temperature coefficient thermistor
  • KS D 8503-2015(2020) Measurement methods of polarization resistance of copper alloy tubes for condenser
  • KS C CISPR 16-1-4-2009 Specification for radio disturbance and immunity measuring apparatus and methods-Part 1-4:Radio disturbance and immunity measuring apparatus-Ancillary equipment-Radiated disturbances
  • KS F 2736-2005 Testing method for polarization resistance of reinforcing bar in concrete
  • KS D 8503-2015 Measurement methods of polarization resistance of copper alloy tubes for condenser
  • KS F 2735-2019 Standard test method for detecting reinforcement by electromagnetic wave method
  • KS C 0256-2002(2022) Testing method of resistivity for silicon crystals and silicon wafers with four - point probe
  • KS F 2734-2019 Standard test method for detecting reinforcement by electromagnetic induction method
  • KS D 0260-1989(1994) TESTING METHODS OF RESISTIVITY FOR SINGLE CRYSTAL SILICON WAFERS WITH FOUR-POINT PROBE

HU-MSZT, Four-electrode detection method

National Health Commission of the People's Republic of China, Four-electrode detection method

  • GB 23200.65-2016 National food safety standards— Determination of tetraconazole residue in foods
  • GB 23200.44-2016 National food safety standards— Determination of carbon disulfide、carbon tetrachloride and ethylene dibromide residues in cereals

Hebei Provincial Standard of the People's Republic of China, Four-electrode detection method

  • DB13/T 5026.3-2019 Method for Determination of Physical Properties of Graphene Conductive Paste Part 3: Four-probe Method for Determination of Electrode Resistivity of Paste
  • DB13/T 5255-2020 Determination of square resistance of graphene conductive ink by four-probe method

International Electrotechnical Commission (IEC), Four-electrode detection method

  • IEC 60100:1962 Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves
  • IEC 60100:1962/AMD1:1969 Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves

国家能源局, Four-electrode detection method

  • NB/T 42082-2016 All-vanadium redox flow battery electrode testing method
  • NB/T 42146-2018 Test methods for zinc-bromine flow battery electrodes, separators, and electrolytes

Professional Standard - Urban Construction, Four-electrode detection method

  • CJ 26.12-1991 Municipal sewage water quality inspection method standard fluoride determination ion selective electrode method

AT-ON, Four-electrode detection method

  • ONORM M 3035-1984 Dejinitions for nondestructive testing methods; electromagnetic methods

YU-JUS, Four-electrode detection method

  • JUS C.K5.032-1980 Magnetic sheets. Methods of test. Insulation resistance measurement
  • JUS H.D8.115-1987 Electric detonators. Methods of testing. Test ofsensitiveness to drop
  • JUS H.Z1.142-1984 Testing of industrial waters. Detarmination of fluoride by ion selective etectrode
  • JUS H.Z1.145-1987 Testing of industrial vvaters. Detsrmination content of sodium by ion selective electrode
  • JUS N.R1.115-1977 Electronic tubes. Measurements of the electrical properties. Methods of measurement of spurious and unwanted electrode currents
  • JUS B.H8.232-1991 Electrical insulating oils - Method for the detection of corrosive sulphur
  • JUS C.X5.032-1990 MagnetIc materials. Hethods of test. Insulation resistance measurement

Professional Standard - Military and Civilian Products, Four-electrode detection method

  • WJ 2100-2004 Test method for silicon photodiodes and silicon avalanche photodiodes

Japanese Industrial Standards Committee (JISC), Four-electrode detection method

  • JIS H 0612:1975 Testing methods of resistivity for single crystal silicon wafers with four point probe
  • JIS B 9915:1989 Measuring methods for dust resistivity (with parallel electrodes)
  • JIS C 7041:1982 Measuring methods for bipolar digital integrated circuits
  • JIS C 5991:1997 Measuring methods of photodiodes for fiber optic transmission
  • JIS K 7194:1994 Testing method for resistivity of conductive plastics with a four-point probe array
  • JIS Z 8752:1989 Measuring methods of low pressures by hot cathode and cold cathode ionization gauges
  • JIS H 0602:1995 Testing method of resistivity for silicon crystals and silicon wafers with four-point probe
  • JIS K 0552:1994 Testing methods for electric conductivity in highly purified water

PL-PKN, Four-electrode detection method

  • PN T01504-22-1987 Transistors Measuring methods Collector-base and emitter-base capacitances Ccbo and Cebo
  • PN T01504-61-1987 Diodes Measuring methods Recovered charge Q,
  • PN T04830-05-1985 Electronic tubes Colour picture tubes Methods of measurement of filament current, anod? current and cathode current
  • PN T01504-10-1987 Transistors Measuring tnethod Collector-emitter sustaining voltage UcEO(sm) and Uceiusus)
  • PN C82055-21-1992 Test methods of pressed carbon products Determination of resistivity on electrodes

Professional Standard - Non-ferrous Metal, Four-electrode detection method

  • YS/T 1032-2015 Inspection method of the interior defects for cathode carbon block for aluminium electrolysis
  • YS/T 480-2005 Aluminium cell test for energy balance and its calculation method-Four-point feed current and two-point feed current prebaked anode aluminium cell
  • YS/T 63.2-2006 Carbonaceous materials used in the production of aluminium-Part 2: Cathode blocks and prebaked anodes-Determination of electrical resistivity at ambient temperature
  • YS/T 587.6-2006 Calcined coke for prebaked blocks. Testing methods. Part 6: Determination of electrical resistivity of granules
  • YS/T 587.4-2006 Calcined coke for prebaked blocks.Testing methods.Part 3:Determination of sulfur content
  • YS/T 587.9-2006 Calcined coke for prebaked blocks. Testing methods. Part 9: Determination of real density
  • YS/T 63.23-2012 Carbonaceous materials used in the production of aluminium.Part 23:Baked anodes.Determination of the reactivity to air.Thermogravimetric method
  • YS/T 411-1998 The measuring method of CO2 reaction of anode carbon,anode paste for aluminium electrolysis
  • YS/T 587.1-2006 Calcined coke for prebaked blocks. Testing methods. Part 1: Determination of ash content
  • YS/T 587.5-2006 Calcined coke for prebaked blocks.Testing methods.Part 5: Determination of trace metals
  • YS/T 587.10-2006 Calcined coke for prebaked blocks. Testing methods. Part 10: Determination of bulk density (tapped)
  • YS/T 587.12-2006 Calcined coke for prebaked blocks. Testing methods. Part 12: Determination of particle size distribution
  • YS/T 587.2-2007 Calcined coke for prebaked blocks.Testing methods.Part 2: Determination of moisture content
  • YS/T 587.8-2006 Calcined coke for prebaked blocks.Testing methods.Part 8: Determination of the reactivity to air
  • YS/T 587.11-2006 Calcined coke for prebaked blocks. Testing methods. Part 11: Determination of grain stability
  • YS/T 587.3-2007 Calcined coke for Prebaked blocks.Testing methods.Part 3: Determination of volatile matter content

工业和信息化部, Four-electrode detection method

  • YS/T 1057.2-2020 Methods for chemical analysis of cobalt tetroxide Part 2: Determination of chloride ion content Ion selective electrode method
  • YS/T 1065.6-2019 Methods for testing the physical and chemical properties of zeolites Part 6: Determination of calcium exchange rate Ion-selective electrode method
  • SJ/T 11792-2022 Test method for conductivity of lithium-ion battery electrode materials
  • SJ/T 11793-2022 Test method for electrochemical properties of lithium-ion battery electrode materials
  • SJ/T 11794-2022 Test method for free lithium in lithium-ion battery cathode materials
  • YS/T 587.10-2016 Testing methods for calcined petroleum coke for carbon anodes - Part 10: Determination of tap density
  • YS/T 1230.1-2018 Methods for chemical analysis of copper anodes Part 1: Determination of copper content by iodometric and electrolytic methods
  • SJ/T 11795-2022 Test method for magnetic foreign matter content in lithium-ion battery electrode materials
  • YS/T 63.27-2015 Testing methods for carbon materials for aluminum use Part 27: Determination of fracture energy of prebaked anodes

TR-TSE, Four-electrode detection method

  • TS 2971-1978 Methods For The Measurement Of Direct Interelectrode Capacitances Of Electronic Tubes And Valves

European Committee for Electrotechnical Standardization(CENELEC), Four-electrode detection method

  • HD 148 S2-1977 Methods for the Measurement of Direct Interelectrode Capacitances of Electronic Tubes and Valves

Military Standard of the People's Republic of China-General Armament Department, Four-electrode detection method

  • GJB 533.12-1988 Detection methods for 45 components of submarine cabin air. Determination of hydrogen fluoride content. Ion-selective electrode method.
  • GJB 7675-2012 Test methods for microwave tube cathodes and components
  • GJB 961-1990 Testing method for electrothermal performance of aircraft electrically heated glass

American National Standards Institute (ANSI), Four-electrode detection method

  • ANSI/UL 2556-2015 UL Standard for Safety Wire and Cable Test Methods (Fourth Edition)
  • ANSI/ASTM C1025:2000 Test Method for Modulus of Rupture in Bending of Electrode Graphite
  • ANSI/ASTM D1830:1999 Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method (10.01)

SE-SIS, Four-electrode detection method

IN-BIS, Four-electrode detection method

Underwriters Laboratories (UL), Four-electrode detection method

  • UL 2556-2015 UL Standard for Safety Wire and Cable Test Methods (Fourth Edition)

ZA-SANS, Four-electrode detection method

  • SANS 15708-2:2005 Non-destructive testing - Radiation methods - Computed tomography Part 2: Examination practices

CU-NC, Four-electrode detection method

  • NC 66-29-1984 Electronics. Bipolar Transistors Measurement Methods

Professional Standard - Hygiene , Four-electrode detection method

  • WS/T 30-1996 Urine.Determination of fluoride.Ion specifi electrode method

Professional Standard - Machinery, Four-electrode detection method

  • JB/T 7704.6-1995 Test method for electroplating solution Determination of polarization curve
  • JB/T 8991-1999 The tin-solder checking method for generator
  • JB/T 10435-2004 Inspection methods for partial discharge testing system of electric cables
  • JB/T 5232-1991 Method for preparing calibration solution for ion-selective electrode measurement
  • JB/T 6229-2014 Methods and limits for checking the direct gas ventilation cooling system of non-salient pole synchronous generator rotor
  • JB/T 8446-2005 Methods for the determination of interturn short-circuit in the rotor winding of cylindrical synchronous generators

GOSTR, Four-electrode detection method

Professional Standard - Energy, Four-electrode detection method

  • NB/T 42007-2013 Test method of bipolar plate for vanadium redox flow battery

Professional Standard - Press and Publication, Four-electrode detection method

National Metrological Technical Specifications of the People's Republic of China, Four-electrode detection method

Defense Logistics Agency, Four-electrode detection method

  • DLA MIL STD 750 4 E-2012 TEST METHOD STANDARD DIODE ELECTRICAL TEST METHODS FOR SEMICONDUCTOR DEVICES PART 4: TEST METHODS 4000 THROUGH 4999

Professional Standard - Ocean, Four-electrode detection method

  • HY/T 267-2018 Testing method of seawater conductivity measuring instrument
  • HY/T 192-2015 Test method of potentiodynamic polarization resistance of metallic materials in seawater

Agricultural Standard of the People's Republic of China, Four-electrode detection method

  • 农业部958号公告-2-2007 High performance liquid chromatographic method for the determination of tetracyclines residues in pig and chicken edible tissues

ES-UNE, Four-electrode detection method

  • UNE-HD 148S2:1977 METHODS FOR THE MEASUREMENT OF DIRECT INTERELECTRODE CAPACITANCES OF ELECTRONIC TUBES AND VALVES. (Endorsed by AENOR in December of 1995.)

Professional Standard - Petroleum, Four-electrode detection method

  • SY/T 6273-2008 Testing method of electric detonators for oil and gas well
  • SY/T 6273-1997 Testing method of electric detonators for oil and gas well
  • SY/T 6273-2016 Detection method of electric detonator for oil and gas well

Jiangsu Provincial Standard of the People's Republic of China, Four-electrode detection method

  • DB32/T 2887-2016 Electromagnetic detection method for traction elevator wire rope

British Standards Institution (BSI), Four-electrode detection method

  • BS 7020-19:1989 Analysis of iron ores. Method for the determination of fluorine content. Ion-selective electrode method
  • BS 7020-19:1988 Analysis of iron ores. Method for the determination of fluorine content. Ion-selective electrode method
  • BS EN 60811-606:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Methods for determining the density

German Institute for Standardization, Four-electrode detection method

  • DIN 54145-2:2013 Non-destructive testing.Electromagnetic detection .Part 2: Active electro-magnetic induction methods
  • DIN 54145-2:2013-02 Non-destructive testing - Electromagnetic detection - Part 2: Active electro-magnetic induction methods
  • DIN 44402-16:1972 Measurements of the electrical properties of electronic tubes and valves; methods of measurement of spurious and unwanted electrode currents

工业和信息化部/国家能源局, Four-electrode detection method

  • JB/T 13155-2017 Nondestructive testing of electromagnetic (eddy current) testing methods for redrawn copper rods used by electricians

Society of Motion Picture and Television Engineers (SMPTE), Four-electrode detection method

Sichuan Provincial Standard of the People's Republic of China, Four-electrode detection method

Professional Standard-Ships, Four-electrode detection method

  • CB/T 3794-2014 Test methods for the properties of piezoelectric ceramics.Test for electrode joint strength

Professional Standard - Electricity, Four-electrode detection method

  • DL/T 502.4-2006 Analytical methods of steam and water in power plants Part 4: Determination of chloride (Electrode method)
  • DL/T 385-2010 Determination of electrostatic charging tendency of transformer oil

The American Road & Transportation Builders Association, Four-electrode detection method

  • AASHTO T 200-1979 Standard Method of Test for pH of Aqueous Solutions with the Glass Electrode

机械电子工业部, Four-electrode detection method

  • JB 5232-1991 Preparation method of calibration solution for ion selective electrode measurement

Professional Standard - Earthquake, Four-electrode detection method

  • DB/T 33.1-2009 Seismic Geoelectric Observation Method Georesistivity Observation Part 1: Single Pole Distance Observation
  • DB/T 33.2-2009 Seismic Geoelectric Observation Method Georesistivity Observation Part 2: Multipole Distance Observation

Professional Standard - Chemical Industry, Four-electrode detection method

  • HG/T 3175-2002 Fabrication and inspection method for High pressure urea equipment ultrasonic examination(UT) on the strip overlay welds of stainless steel

RO-ASRO, Four-electrode detection method

  • STAS 12123/3-1983 Semiconductor devices VOLTAGE REFERENCE DIODES AND VOLTAGE REGULATOR DIODES Measuring methodes for electrical characteristics




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved