ZH
RU
ES

or size classification

or size classification, Total:152 items.

In the international standard classification, or size classification involves: Textile fibres, Small craft, Shipbuilding and marine structures in general, Fasteners for aerospace construction, Cutting tools, Microbiology, Company organization and management, First aid, Pipeline components and pipelines, Valves, Electrical equipment for working in special conditions, Earthworks. Excavations. Foundation construction. Underground works, Plastics, Medical equipment, Protective equipment, Optoelectronics. Laser equipment, Water quality, Hospital equipment, Electrical engineering in general, Construction of waterways and ports, Installations in buildings, Fibre optic communications, Electrical wires and cables, External structures, Construction materials, Safety of machinery.

AR-IRAM, or size classification

RU-GOST R, or size classification

GOST ISO 1833-22-2015 Textiles. Quantitative chemical analysis. Part 22. Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chloride)
GOST 30852.11-2002 Explosionproof electrical apparatus. Part 12. Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents
GOST R 51330.11-1999 Explosionprotected electrical apparatus. Part 12. Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents
GOST R 50571.7.709-2013 Low-voltage electrical installation. Part 7. Requirements for special installations or locations. Section 709. Marinas and similar location

ZA-SANS, or size classification

SANS 12217-3:2008 Small craft - Stability and buoyancy assessment and categorization Part 3: Boats of hull length less than 6 m
SANS 12217-2:2008 Small craft - Stability and buoyancy assessment and categorization Part 2: Sailing boats of hull length greater than or equal to 6 m
SANS 12217-1:2008 Small craft - Stability and buoyancy assessment and categorization Part 1: Non-sailing boats of hull length greater than or equal to 6 m
SANS 9308-3:2004 Water quality - Detection and enumeration of Escherichia coli and coliform bacteria Part 3: Miniaturized method (Most Probable Number) for the detection and enumeration of E. coli in surface and waste water

British Standards Institution (BSI), or size classification

BS EN ISO 12217-1:2002+A1:2009 Small craft - Stability and buoyancy assessment and categorization - Non-sailing boats of hull length greater than or equal to 6 m
BS EN ISO 12217-2:2015 Small craft. Stability and buoyancy assessment and categorization. Sailing boats of hull length greater than or equal to 6 m
BS EN ISO 12217-2:2013 Small craft. Stability and buoyancy assessment and categorization. Sailing boats of hull length greater than or equal to 6 m
BS EN ISO 12217-2:2017 Tracked Changes. Small craft. Stability and buoyancy assessment and categorization. Sailing boats of hull length greater than or equal to 6 m
BS EN ISO 12217-1:2017 Tracked Changes. Small craft. Stability and buoyancy assessment and categorization. Non-sailing boats of hull length greater than or equal to 6 m
20/30405600 DC BS EN 17477. Algae and algae products. Identification of the biomass of micro-algae, macro-algae, cyanobacteria and/or Labyrithulomycetes. Detection and identification with morphological and/or molecular methods
BS EN 17477:2021 Algae and algae products. Identification of the biomass of microalgae, macroalgae, cyanobacteria and Labyrinthulomycetes. Detection and identification with morphological and/or molecular methods
BS EN ISO 11810-1:2009 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition and penetration
BS 4285 Sec.3.7:1987 Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Enumeration of coliform bacteria

Korean Agency for Technology and Standards (KATS), or size classification

KS V ISO 12217-1:2013 Small craft－Stability and buoyancy assessment and categorization－Part 1：Non-sailing boats of hull length greater than or equal to 6 m
KS V ISO 12217-2-2005(2020) Small craft－Stability and buoyancy assessment and categorization－Part 2：Sailing boats of hull length greater than or equal to 6 m
KS V ISO 12217-1-2013(2018) Small craft－Stability and buoyancy assessment and categorization－Part 1：Non-sailing boats of hull length greater than or equal to 6 m
KS I ISO 9308-3:2009 Water quality-Detection and enumeration of Escherichia coli and coliform bacteria-Part 3: Miniaturized method(Most Probable Number) for the detection and enumeration of E. coli in surface and waste water
KS B ISO 11810-2:2020 Lasers and laser-related equipment — Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers — Part 2: Secondary ignition
KS W 0932-1998(2003) Aerospace-Self-locking, fixed, single-lug anchor nuts,reduced series, with counterbore, strength classification 1100MPa and maximum operating temperature 235 degrees C

HU-MSZT, or size classification

MSZ 6354/8-1987

ES-AENOR, or size classification

Danish Standards Foundation, or size classification

DS/EN ISO 12217-2:2013 Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m
DS/EN ISO 12217-1:2013 Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m
DS/EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
DS/EN 17477:2021 Algae and algae products – Identification of the biomass of microalgae, macroalgae, cyanobacteria and Labyrinthulomycetes – Detection and identification with morphological and/or molecular methods
DS/EN ISO 11810-2:2009 Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Part 2: Secondary ignition
DS/EN ISO 11810-1:2009 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition and penetration

International Organization for Standardization (ISO), or size classification

ISO 12217-2:2022 Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m
ISO 513:2012 Classification and application of hard cutting materials for metal removal with defined cutting edges - Designation of the main groups and groups of application
ISO 513:2004 Classification and application of hard cutting materials for metal removal with defined cutting edges - Designation of the main groups and groups of application
ISO 9308-3:1998 Water quality - Detection and enumeration of Escherichia coli and coliform bacteria in surface and waste water - Part 3: Miniaturized method (most probable number) by inoculation in liquid medium
ISO 11810-2:2007 Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Part 2: Secondary ignition
ISO 9308-3:1998/cor 1:2000 Water quality - Detection and enumeration of Escherichia coli and coliform bacteria in surface and waste water - Part 3: Miniaturized method (most probable number) by inoculation in liquid medium; Technical Corrigendum 1

European Committee for Standardization (CEN), or size classification

EN ISO 12217-2:2002 Small Craft - Stability and Buoyancy Assessment and Categorization - Part 2: Sailing Boats of Hull Length Greater Than or Equal to 6 m ISO 12217-2: 2002
EN ISO 12217-1:2002 Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m Incorporates Amendment A1: 2009
EN ISO 12217-1:2015 Small craft - Stability and buoyancy assessment andcategorization - Part 1: Non-sailing boats of hull lengthgreater than or equal to 6 m
EN ISO 12217-3:2015 Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m
EN ISO 12217-2:2015 Small craft - Stability and buoyancy assessment andcategorization - Part 2: Sailing boats of hull length greaterthan or equal to 6 m
prEN ISO 12217-2:2020 Small craft - Stability and buoyancy assessment and categorization - Part 2: -Sailing boats of hull length greater than or equal to 6 m (ISO/DIS 12217-2:2020)
prEN ISO 12217-2 Small craft - Stability and buoyancy assessment and categorization - Part 2: -Sailing boats of hull length greater than or equal to 6 m (ISO/DIS 12217-2:2020)
prEN ISO 12217-1:2020 Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO/FDIS 12217-1:2020)
prEN ISO 12217-1 Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO/DIS 12217-1:2020)
EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
EN ISO 11810-2:2009 Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Part 2: Secondary ignition
EN 17477:2021 Algae and algae products - Identification of the biomass of microalgae, macroalgae, cyanobacteria and Labyrinthulomycetes - Detection and identification with morphological and/or molecular methods
EN ISO 9308-3:1998 Water Quality - Detection and Enumeration of Escherichia Coli and Coliform Bacteria - Part 3: Miniaturized Method (Most Probable Number) for the Detection and Enumeration of E Coli in Surface and Waste Water (Incorporating Corrigendum No. 1)
EN 13978-1:2005 Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions
EN ISO 9308-3:1998/AC:2000 Water quality - Detection and enumeration of Escherichia coli and coliform bacteria in surface and wastewater - Part 3: Miniaturized method (Most Probable Number) by inoculation in liquid medium (ISO 9308-3:1998)

Association Francaise de Normalisation, or size classification

NF J95-058-2*NF EN ISO 12217-2:2017 Small craft - Stability and buoyancy assessment and categorization - Part 2 : Sailing boats of hull length greater than or equal to 6 m
NF EN ISO 12217-2:2017 Petits navires - Évaluation et catégorisation de la stabilité et de la flottabilité - Partie 2 : bateaux à voiles d'une longueur de coque supérieure ou égale à 6 m
NF J95-058-1*NF EN ISO 12217-1:2017 Small craft - Stability and buoyancy assessment and categorization - Part 1 : Non-sailing boats of hull length greater than or equal to 6 m
NF EN ISO 12217-1:2017 Petits navires - Évaluation et catégorisation de la stabilité et de la flottabilité - Partie 1 : bateaux à propulsion non vélique d'une longueur de coque supérieure ou égale à 6 m
NF EN 12007-2:2012 Infrastructures gazières - Canalisations pour pression maximale de service inférieure ou égale à 16 bar - Partie 2 : exigences fonctionnelles spécifiques pour le polyéthylène (MOP inférieure ou égale à 10 bar)
NF E29-319*NF EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
NF EN 62271-103:2012 Appareillage à haute tension - Partie 103 : interrupteurs pour tensions assignées supérieures à 1 kV et inférieures ou égales à 52 kV
NF P94-059:1992 SOILS INVESTIGATION AND TESTING. IDENTIFICATION AND CLASSIFICATION TEST. DETERMINATION OF MINIMAL AND MAXIMAL DENSITY OF COHESIONLESS SOILS.
UTE C53-240-6:2007 Entraînements électriques de puissance à vitesse variable - Partie 6 : guide de détermination du type de régime de charge et de dimensionnement en courant correspondant
NF P16-800-3/IN2:2013 Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants
NF X85-008*NF EN 17477:2021 Algae and algae products - Identification of the biomass of microalgae, macroalgae, cyanobacteria and Labyrithulomycetes - Detection and identification with morphological and/or molecular meth
NF EN 12007-3:2015 Infrastructures gazières - Canalisations pour pression maximale de service inférieure ou égale à 16 bar - Partie 3 : exigences fonctionnelles spécifiques pour l'acier
NF EN 12007-1:2012 Infrastructures gazières - Canalisations pour pression maximale de service inférieure ou égale à 16 bar - Partie 1 : exigences fonctionnelles générales
NF EN 12007-4:2012 Infrastructures gazières - Canalisations pour pression maximale de service inférieure ou égale à 16 bar - Partie 4 : exigences fonctionnelles spécifiques pour la rénovation
NF EN 12007-5:2014 Infrastructures gazières - Canalisations pour pression maximale de service inférieure ou égale à 16 bar - Partie 5 : branchements - Recommandations fonctionnelles spécifiques
NF C31-317-62*NF EN 60317-62:2012 Specifications for particular types of winding wires - Part 62 : polyester glass fibre wound, minimum class 200 resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
NF C31-317-60*NF EN 60317-60:2012 Specifications for particular types of winding wires - Part 60 : polyester glass fibre wound minimum class 155 resin or varnish impregnated or not impregnated, bare or enamelled, rectangular copper wire, temperature index 155
NF EN 17477:2021 Algues et produits d'algues - Identification de la biomasse de microalgues, macroalgues, cyanobactéries et Labyrinthulomycètes - Détection et identification à l'aide de méthodes morphologiques et/ou moléculaires
NF S97-132-1:2009 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Part 1 : primary ignition and penetration.
NF P19-838-1*NF EN 13978-1:2005 Precast concrete products - Precast concrete garages - Part 1 : requirements for reinforced garages monolithic or consisting of single sections with room dimensions
NF C79-133:2001 Safety of machinery - Electrical equipment of machines - Part 11 : requirements for HV equipement for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV.

KR-KS, or size classification

KS V ISO 12217-1-2013(2023) Small craft－Stability and buoyancy assessment and categorization－Part 1：Non-sailing boats of hull length greater than or equal to 6 m
KS B ISO 11810-2-2020 Lasers and laser-related equipment — Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers — Part 2: Secondary ignition

German Institute for Standardization, or size classification

DIN 65016:2010 Aerospace - Self-locking nuts with reduced locking torque with maximum operating temperature less than or equal to 425 °C - Technical Specification
DIN 65016:2017 Aerospace - Self-locking nuts with reduced locking torque with maximum operating temperature less than or equal to 425 °C - Technical Specification
DIN EN ISO 12217-2:2016-03 Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015); German version EN ISO 12217-2:2015 / Note: To be replaced by DIN EN ISO 12217-2 (2021-01).
DIN EN ISO 12217-1:2016-08 Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015); German version EN ISO 12217-1:2015 / Note: To be replaced by DIN EN ISO 12217-1 (2021-02).
DIN EN ISO 12217-2/A100:2017 Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015)
DIN EN ISO 12217-2:2016 Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015)
DIN EN ISO 12217-2:2021 Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO/FDIS 12217-2:2020); German and English version prEN ISO 12217-2:2020
DIN EN ISO 12217-1/A100:2017 Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015)
DIN EN ISO 12217-2/A100:2017-12 Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015); German version EN ISO 12217-2:2017; Amendment A100 / Note: To be replaced by DIN EN ISO 12217-2 (...
DIN EN ISO 12217-1/A100:2017-12 Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015); German version EN ISO 12217-1:2017; Amendment A100 / Note: To be replaced by DIN EN ISO 12217...
DIN EN 13774:2013-05 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements; German version EN 13774:2013
DIN EN ISO 12217-1:2009 Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2002 + Amd 1:2009); German version EN ISO 12217-1:2002 + A1:2009
DIN EN ISO 9308-3:1999 Water quality - Detection and enumeration of Escherichia coli and coliform bacteria in surface and waste water - Part 3: Miniaturized method (most probable number) by inoculation in liquid medium (ISO 9308-3:1998); German version EN ISO 9308-3:1998
DIN EN 50377-17-1:2014 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 17-1: Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre an
DIN EN 17477:2021-10 Algae and algae products - Identification of the biomass of microalgae, macroalgae, cyanobacteria and Labyrithulomycetes - Detection and identification with morphological and/or molecular methods; German version EN 17477:2021
DIN EN 17477:2021 Algae and algae products - Identification of the biomass of microalgae, macroalgae, cyanobacteria and Labyrithulomycetes - Detection and identification with morphological and/or molecular methods; German version EN 17477:2021
DIN EN 50377-17-2:2015 Connector sets and Interconnect components to be used in optical fibre communication systems - Product specifications - Part 17-2: Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre an
DIN EN ISO 11810-2:2007 Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Part 2: Secondary ignition (ISO 11810-2:2007); German version EN ISO 11810-2:2007
DIN EN 13978-1:2005 Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions; German version EN 13978-1:2005

CZ-CSN, or size classification

CSN 56 0520-6-1995 Methods of pearl barley, rice, millet, buckwheat and pulse analysis. Determination of moisture content
CSN ISO 513:1994 Application of hard cutting materials for machining by chip removal. Designation of the main groups of chip removal and groups of application

BE-NBN, or size classification

GOSTR, or size classification

GOST ISO 12217-1-2016 Small craft. Stability and buoyancy assessment and categorization. Part 1. Non-sailing boats of hull length greater than or equal to 6 m

未注明发布机构, or size classification

DIN EN ISO 12217-2:2002 Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m
BS 5000-11:1973(2000) Specification for Rotating electrical machines of particular types or for particular applications — Part 11 : Small - power electric motors and generators

Lithuanian Standards Office , or size classification

LST EN ISO 12217-2:2003 Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2002)
LST EN ISO 12217-1:2003 Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2002)
LST EN 13774-2004 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
LST EN ISO 12217-1:2003/A1:2009 Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m - Amendment 1 (ISO 12217-1:2002/Amd 1:2009)
LST EN 17477-2021 Algae and algae products - Identification of the biomass of microalgae, macroalgae, cyanobacteria and Labyrinthulomycetes - Detection and identification with morphological and/or molecular methods
LST EN ISO 11810-2:2009 Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Part 2: Secondary ignition (ISO 11810-2:2007)

AENOR, or size classification

UNE-EN ISO 12217-2:2017 Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015)
UNE-EN ISO 12217-1:2017 Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015)
UNE-EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, or size classification

GB/T 2075-2007 Classification and application of hard cutting materials for metal removal with defined cutting edges.Designation of the main groups and groups of application
GB/T 2075-1998 Application of hard cutting materials for machining by chip removal--Designation of the main groups of chip removal and groups of application
GB/T 3836.12-2008 Explosive atmospheres - Part 12: Classification of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting current
GB 3836.12-2008 Explosive atmospheres.Part 12:Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting current

AT-ON, or size classification

OENORM EN ISO 12217-2:2020 Small craft - Stability and buoyancy assessment and categorization - Part 2: -Sailing boats of hull length greater than or equal to 6 m (ISO/DIS 12217-2:2020)
OENORM EN ISO 12217-1:2020 Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO/DIS 12217-1:2020)
ONORM B 2591-1995 Ductile cast iron pipes and fittings for gas or water pipelines - Types, dimensions, quality control, marking of conformity

IN-BIS, or size classification

IS 9570-1980

PT-IPQ, or size classification

NP 4400-1-2002 Food microbiology General guidance for the enumeration of coagulase positive Staphylococci (Staphylococcus aureus and other species) Part 1:Technique with colonies confirmation (Routine methode)
NP 4400-2-2002 Food microbiology General guidance for enumeration of coagulase positive Staplylococci (Staphylococcus aureus and other species) Part 2:Technique without colonies confirmation (Routine methode)
NP 2762/1-1984

American Society for Testing and Materials (ASTM), or size classification

ASTM F1654-95(2012) Standard Guide for Training and Evaluation of Individuals Who are Responsible for or Perform Triage in a Prehospital Environment
ASTM D6579-11(2020) Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography

Japanese Industrial Standards Committee (JISC), or size classification

JIS B 4053:2013 Classification and application of hard cutting materials for metal removal with defined cutting edges.Designation of the main groups and groups of application

US-CFR-file, or size classification

CFR 19-10.748-2015 Customs Duties. Part10:Articles conditionally free, subject to a reduced rate, etc. SubpartL:United States-Australia Free Trade Agreement. Section10.748:Goods re-entered after repair or alteration in Australia.
CFR 13-121.201-2014 Business credit and assistance. Part121:Small business size regulations. SubpartA:Size eligibility provisions and standards. Section121.201:What size standards has sba identified by north american industry classification system codes?
CFR 48-19.303-2014 Federal acquisition regulations system. Part19:Small business programs. Subpart19.3:Determination of small business status for small business programs. Section19.303:Determining North American Industry Classification System codes and size standards.
CFR 19-10.731-2015 Customs Duties. Part10:Articles conditionally free, subject to a reduced rate, etc. SubpartL:United States-Australia Free Trade Agreement. Section10.731:Textile and apparel goods classifiable as goods put up in sets.
CFR 19-10.747-2015 Customs Duties. Part10:Articles conditionally free, subject to a reduced rate, etc. SubpartL:United States-Australia Free Trade Agreement. Section10.747:Framework for correcting claims or supporting statements.
CFR 19-10.727-2015 Customs Duties. Part10:Articles conditionally free, subject to a reduced rate, etc. SubpartL:United States-Australia Free Trade Agreement. Section10.727:Maintenance of records.
CFR 19-10.735-2015 Customs Duties. Part10:Articles conditionally free, subject to a reduced rate, etc. SubpartL:United States-Australia Free Trade Agreement. Section10.735:Value of materials.
CFR 19-10.734-2015 Customs Duties. Part10:Articles conditionally free, subject to a reduced rate, etc. SubpartL:United States-Australia Free Trade Agreement. Section10.734:Regional value content.
CFR 13-121.502-2014 Business credit and assistance. Part121:Small business size regulations. SubpartA:Size eligibility provisions and standards. Section121.502:What size standards are applicable to programs for sales or leases of Government property?

ESDU - Engineering Sciences Data Unit, or size classification

ESDU 94015-1994 Surface pressure coefficient distributions for axisymmetric forecowls at zero incidence (M sub infinity less than or equal to 1.5).

Standard Association of Australia （SAA）, or size classification

AS/NZS 60079.12:2000 Electrical apparatus for explosive gas atmospheres - Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents

International Electrotechnical Commission (IEC), or size classification

IEC TR 60079-12:1978 Electrical apparatus for explosive gas atmospheres. Part 12 : Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents
IEC 60364-7-709:2007 Low-voltage electrical installations - Part 7-709: Requirements for special installations or locations - Marinas and similar locations
IEC 60364-7-709:2012 Low-voltage electrical installations - Part 7-709: Requirements for special installations or locations - Marinas and similar locations
IEC 60317-62:2012 Specifications for particular types of winding wires - Part 62: Polyester glass fibre wound, minimum class 200 resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
IEC 60364-7-708:2017 Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations

Underwriters Laboratories (UL), or size classification

UL 122001-2014 UL Standard for Safety General Requirements for Electrical Ignition Systems for Internal Combustion Engines in Class I@ Division 2 or Zone 2@ Hazardous (Classified) Locations (First Edition)

CEN - European Committee for Standardization, or size classification

EN ISO 11810-2:2007 Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Part 2: Secondary ignition

Taiwan Provincial Standard of the People's Republic of China, or size classification

CNS 3376.12-2002 Electrical apparatus for explosive gas atmospheres - Part 12: Classification of mixtures or gases of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents
CNS 3376-12-2002 Electrical apparatus for explosive gas atmospheres - Part 12: Classification of mixtures or gases of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents

CH-SNV, or size classification

SN EN 17477-2021 Algae and algae products - Identification of the biomass of microalgae, macroalgae, cyanobacteria and Labyrinthulomycetes - Detection and identification with morphological and/or molecular methods

ES-UNE, or size classification

UNE-EN 17477:2022 Algae and algae products - Identification of the biomass of microalgae, macroalgae, cyanobacteria and Labyrinthulomycetes - Detection and identification with morphological and/or molecular methods

VN-TCVN, or size classification

TCVN 6189-1-2009 Water quality.Detection and enumeration of intestinal enterococci in surface and waste water.Part 1: Miniaturized method (most probable number) by inoculation in liquid medium