ZH
RU
ES

reduced modulus of elasticity

reduced modulus of elasticity, Total:500 items.

In the international standard classification, reduced modulus of elasticity involves: Mechanical testing, Rubber, Analytical chemistry, Continuous handling equipment, Construction materials, Wood, sawlogs and sawn timber, Plastics, Wood-based panels, Testing of metals, Ceramics, Conducting materials, Glass, Iron and steel products, Wood technology processes, Earthworks. Excavations. Foundation construction. Underground works, Insulating fluids, Cellular materials, Powder metallurgy, Computer graphics, Textile fibres, Mining and quarrying, Non-destructive testing, Civil engineering in general, Technical drawings, Raw materials for rubber and plastics, Non-ferrous metals, Waxes, bituminous materials and other petroleum products, Road engineering, Fuels, Road vehicles in general, Paper and board, Reinforced plastics, Interior finishing, Non-textile floor coverings, Materials for the reinforcement of composites, Refractories, Inorganic chemicals, Hydraulic fluids, Soil quality. Pedology, Paints and varnishes, Metrology and measurement in general, Protection against fire, Structures of buildings, Insulating materials, Environmental testing, Fluid power systems, Industrial automation systems.

FI-SFS, reduced modulus of elasticity

SFS 5450-1988

ES-AENOR, reduced modulus of elasticity

AASHTO - American Association of State Highway and Transportation Officials, reduced modulus of elasticity

DIVISION I 8.7-1996 Modulus of Elasticity and Poisson?s Ratio
T 307-1999 Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials
TP46-1994 Standard Test Method for Determining the Resilient Modulus of Soils and Aggregate Materials
TP31-1996 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension
TP31-1994 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension (Edition 1B)
T292-1991 Standard Method of Test for Resilient Modulus of Subgrade Soils and Untreated Base/Subbase Materials (Eighteenth Edition)
T 292-1997 Standard Method of Test for Resilient Modulus of Subgrade Soils and Untreated Base/Subbase Materials (No Superseded)

Indonesia Standards, reduced modulus of elasticity

SNI 07-6733-2002 Test methods for elasticity of modulus, tangen of modulus, and chord of modulus
SNI 2826-2008
SNI ISO 16978:2010 Wood-based panels - Determination of modulus elasticity in bending and of bending strength
SNI 03-6836-2002 Test method of resilient modulus for asphalt mixture by indirect tensile

Professional Standard - Chemical Industry, reduced modulus of elasticity

HG/T 3321-2012 Vulcanized rubber.Determination of elastic modulus
HG/T 3321-1981 Method for determination of modulus of elasticity of vulcanized rubber

Shandong Provincial Standard of the People's Republic of China, reduced modulus of elasticity

DB37/T 2263-2012 Determination of modulus of elasticity in tension of vulcanized rubber

GM North America, reduced modulus of elasticity

GMP.EEBC+PBT.006-2002 Copolyester Elastomer - 300 MPa Flexural Modulus Revision B
GM GMP.EEBC+ PBT.002-1993 Copolyester Elastomer - 700 MPa Flexural Modulus
GM GMP.EEBC+ PBT.001-1992 Copolyester Elastomer - 700 MPa Flexural Modulus
GM GMP.EEBC+PBT.002-2002 Copolyester Elastomer - 850 MPa Flexural Modulus
GM GMN7302-2001 Copolyester Elastomer - 200MPa Flexural Modulus
GM GMP.EEBC+PBT.006-2002 Copolyester Elastomer - 300 MPa Flexural Modulus
GM GMP.PBT+TEEE.001-2002 Copolyester Elastomer 450 MPa Flexural Modulus, Paintable
GM GMP.PBT+TEEE.002-2002 Copolyester Elastomer 700 MPa Flexural Modulus, Paintable
GMP.EEBC.013-2002 Thermoplastic Polyester Elastomer - 49 Type D Hardness, 87 MPa Flexural Modulus
GM GMP.EEBC.003-2001 Thermoplastic Polyester Elastomer - 73 Type D Hardness, 560 MPa Flexural Modulus
GM GMP.EEBC.004-2001 Thermoplastic Polyester Elastomer - 47 Type D Hardness, 90 MPa Flexural Modulus
GM GMP.EEBC.007-2002 Thermoplastic Polyester Elastomer - 62 Type D Hardness, 300 MPa Flexural Modulus
GM GMP.EEBC.008-2001 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 200 MPa Flexural Modulus
GM GMP.EEBC.012-2002 Thermoplastic Polyester Elastomer - 49 Type D Hardness, 195 MPa Flexural Modulus
GM GMP.EEBC.013-2002 Thermoplastic Polyester Elastomer - 49 Type D Hardness, 87 MPa Flexural Modulus
GM GMP.EEBC.014-2001 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 520 MPa Flexural Modulus
GM GMP.EEBC.015-2001 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 400 MPa Flexural Modulus
GM GMP.EEBC.018-2003 Thermoplastic Polyester Elastomer - 48 Type D Hardness, 170 MPa Flexural Modulus, Lubricated Modulus, Lubricated
GM GMP.EEBC.001-2004 Thermoplastic Elastomer - Polyester, Shore D36, 45 MPa Flexural Modulus
GM GMP.EEBC.002-1994 Thermoplastic Polyester Elastomer - 42 Type D Durometer Hardness, 60 MPa Flexural Modulus
GM GMP.EEBC.017-2002 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 200 MPa Flexural Modulus, Heat Stabilized
GM GMP.EEBC.005-2014 Polyester Elastomer - Low Modulus (Issue 2; Do Not Use on New Programs; Replaced by GMW17187)
GMP.TES.014-2005 Thermoplastic Elastomer - Styrene Block Copolymer, Shore D34, 240 MPa Flexural Modulus, Interior, Integrally Colored Revision B
GM GMN7305-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore D40, 160 MPa Flexural Modulus, Interior, Integrally Colored
GM GMP.TES.012-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A89, 100 MPa Flexural Modulus, Interior, Integrally Colored
GM GMP.TES.014-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A93, 240 MPa Flexural Modulus, Interior, Integrally Colored
GM GMP.EEBC.004-2013 Thermoplastic Polyester Elastomer 47 Type D Hardness, 90 MPa Flexural Modulus (Issue 2; Do Not Use on New Programs; No Replacement)
GM GMP.EEBC.015-2013 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 400 MPa Flexural Modulus (Issue 3; Do Not Use on New Programs; No Replacement)
GM GMP.TES.009-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A86, 105 MPa Flexural Modulus, Interior, Paintable
GM GMP.TES.008-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A87, 100 MPa Flexural Modulus, Interior, Paintable
GM GMN6814-2002 Standard Test Methods for Vulcanized Rubber and TPE for Use in Finite Element Analysis Modeling
GM GMP.EEBC.002-2014 Thermoplastic Polyester Elastomer - 42 Type D Durometer Hardness, 60 MPa Flexural Modulus (Issue 3; Do Not Use on New Programs; Replaced by GMW17187)
GM GMP.EEBC.020-2013 Thermoplastic Elastomer - Poly(ether ester) Block Copolymer, Shore D 45, 300 MPa Flexural Modulus (Issue 2; Do Not Use on New Programs; No Replacement)

SE-SIS, reduced modulus of elasticity

SIS 20 03 11
SIS SS 13 72 32-1983 Concrete testing - Hardened concrete - Modulus of elasticity in ompression
SIS SS 13 73 09-1982 Autoclaved aerated concrete - Determination of modulus of elasticity at compression
SIS SS 11 21 39-1987 Aliuminium and steel - Stranded con- uctors for overhead lines - Tensile esting for the determination of the odulus of elasticity

International Organization for Standardization (ISO), reduced modulus of elasticity

ISO 9856:1989 Conveyor belts; determination of elastic modulus
ISO 3349:1975 Wood; Determination of modulus of elasticity in static bending
ISO 12076:2002 Steel wire ropes - Determination of the actual modulus of elasticity
ISO 6784:1982 Concrete; Determination of static modulus of elasticity in compression
ISO 9856:2003 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
ISO 9856:2016 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
ISO 21181:2005 Light conveyor belts - Determination of the relaxed elastic modulus
ISO/TR 4137:1978 Plastics; Determination of modulus of elasticity by alternating flexure
ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus
ISO 6073:1980 Hydraulic fluid power; Petroleum fluids; Prediction of bulk moduli
ISO 16978:2003 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
ISO 3312:1987 Sintered metal materials and hardmetals; Determination of Young modulus
ISO 11093-7:2011 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method
ISO 1209-2:2007 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
ISO 1209-2:2004 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
ISO 21713:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of elastic modulus of ceramics at high temperature by thin wall C-ring method
ISO 21222:2020 Surface chemical analysis — Scanning probe microscopy — Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
ISO 13061-4:2014 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 4: Determination of modulus of elasticity in static bending

American Society for Testing and Materials (ASTM), reduced modulus of elasticity

ASTM E111-04 Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus
ASTM E111-97 Standard Test Method for Young''s Modulus, Tangent Modulus, and Chord Modulus
ASTM C1352-96(2002) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352-96 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352-96(2008) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352/C1352M-09 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1591-04 Standard Test Method for Determination of the Modulus of Elasticity of AAC
ASTM C1352/C1352M-21 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352/C1352M-15 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM D5858-96(2003) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
ASTM D5858-96(2015) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
ASTM D5858-96(2008) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
ASTM B223-97 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
ASTM B223-03 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
ASTM B223-08(2018) Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
ASTM B223-08(2013) Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
ASTM B223-08 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
ASTM C1523-04 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
ASTM C120/C120M-15 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C1523-02a Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
ASTM D6793-02 Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
ASTM D3148-02 Standard Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression
ASTM D3148-96 Standard Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression
ASTM C469/C469M-14e1 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
ASTM D6793-02(2012) Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
ASTM D6793-02(2007) Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
ASTM C469/C469M-22 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
ASTM D5858-96e1 Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
ASTM D5858-96(2020) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
ASTM C469/C469M-10 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
ASTM C120-05e1 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C469/C469M-14 Standard Test Method for Static Modulus of Elasticity and Poissonrsquo;s Ratio of Concrete in Compression
ASTM C469-94 Standard Test Method for Static Modulus of Elasticity and Poisson''s Ratio of Concrete in Compression
ASTM C469-94e1 Standard Test Method for Static Modulus of Elasticity and Poisson''s Ratio of Concrete in Compression
ASTM C469-02 Standard Test Method for Static Modulus of Elasticity and Poisson''s Ratio of Concrete in Compression
ASTM C469-02e1 Standard Test Method for Static Modulus of Elasticity and Poisson''s Ratio of Concrete in Compression
ASTM C885-87(2002) Standard Test Method for Young''s Modulus of Refractory Shapes by Sonic Resonance
ASTM C885-87(2007) Standard Test Method for Young''s Modulus of Refractory Shapes by Sonic Resonance
ASTM D7369-09 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test
ASTM C885-87(2007)e1 Standard Test Method for Young''s Modulus of Refractory Shapes by Sonic Resonance
ASTM D7369-20 Standard Test Method for Determining the Resilient Modulus of Asphalt Mixtures by Indirect Tension Test
ASTM C747-93(2005) Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ASTM C1523-02 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
ASTM C1523-17 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
ASTM D7012-07 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
ASTM D8356-20 Standard Test Method for Sonic Velocity in Manufactured Carbons and Graphite Materials for use in Obtaining Approximate Elastic Constants: Young’s Modulus, Shear Modulus, and Poisson’s Ratio
ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM D7012-04 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
ASTM D7012-07e1 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
ASTM D7012-14e1 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
ASTM F1514-03(2008) Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
ASTM C580-98 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
ASTM D5407-95(2000) Standard Test Method for Elastic Moduli of Undrained Intact Rock Core Specimens in Triaxial Compression Without Pore Pressure Measurement
ASTM C580-18 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
ASTM F1514-19 Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
ASTM D7012-13 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
ASTM C580-18(2023) Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
ASTM C747-93(1998) Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ASTM C747-16 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ASTM C747-23 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ASTM D5934-02 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-15 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM C747-93(2010)e1 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ASTM F1515-21 Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change
ASTM F1515-03(2008) Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change
ASTM E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM C1523-10 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
ASTM E2769-22 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D7291/D7291M-15 Standard Test Method for Through-Thickness &x201c;Flatwise&x201d; Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material

British Standards Institution (BSI), reduced modulus of elasticity

BS EN 12390-13:2013 Testing hardened concrete. Determination of secant modulus of elasticity in compressio
BS EN 12390-13:2021 Testing hardened concrete. Determination of secant modulus of elasticity in compression
BS EN ISO 9856:2003+A1:2012 Conveyor belts. Determination of elastic and permanent elongation and calculation of elastic modulus
BS EN ISO 9856:2016 Conveyor belts. Determination of elastic and permanent elongation and calculation of elastic modulus
BS EN ISO 21181:2013 Light conveyor belts. Determination of the relaxed elastic modulus
BS EN 14146:2004 Natural stone test methods - Determination of the dynamic elastic modulus of elasticity (by measuring the fundamental resonance frequency)
BS EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
BS EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
19/30397531 DC BS EN 12390-13. Testing hardened concrete. Part 13. Determination of secant modulus of elasticity in compression
BS 1881-209:1990 Testing concrete - Recommendations for the measurement of dynamic modulus of elasticity
BS 1881-121:1983 Testing concrete - Method for determination of static modulus of elasticity in compression
BS EN 1081:2018+A1:2020 Resilient, laminate and modular multilayer floor coverings. Determination of the electrical resistance
BS 6319-3:1990 Testing of resin and polymer/cement compositions for use in construction - Methods for measurement of modulus of elasticity in flexure and flexural strength
BS EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5:Determination of elastic moduli at elevated temperatures
BS 2782-3 Methods 320A to 320F:1976 Methods of testing plastics - Mechanical properties - Tensile strength, elongation and elastic modulus
BS EN 13412:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
19/30402773 DC BS EN 1081 AMD1. Resilient, laminate and modular multilayer floor coverings. Determination of the electrical resistance
BS EN 13412:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
BS EN 13286-43:2003(2017) Unbound and hydraulically bound mixtures - Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
BS EN 13286-43:2003 Unbound and hydraulically bound mixtures - Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
BS ISO 21713:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of elastic modulus of ceramics at high temperature by thin wall C-ring method
BS EN 1352:1997 Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure

German Institute for Standardization, reduced modulus of elasticity

DIN 68364:2003 Properties of wood species - Density, modulus of elasticity and strength
DIN 68364:2003-05 Properties of wood species - Density, modulus of elasticity and strength
DIN EN ISO 21181:2007 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2005); German version EN ISO 21181:2006
DIN EN ISO 21181:2013-09 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2013); German version EN ISO 21181:2013
DIN EN ISO 9856:2017-03 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016); German version EN ISO 9856:2016
DIN EN 14580:2005 Natural stone test methods - Determination of static elastic modulus; German version EN 14580:2005
DIN EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN EN 310:1993-08 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN EN 14580:2005-07 Natural stone test methods - Determination of static elastic modulus; German version EN 14580:2005
DIN EN 12390-13:2019 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression; German and English version prEN 12390-13:2019
DIN EN 12390-13:2021-09 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression; German version EN 12390-13:2021
DIN 52377:2016-07 Testing of plywood - Determination of modulus of elasticity in tension and of tensile strength
DIN EN ISO 9856:2017 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016); German version EN ISO 9856:2016
DIN EN 14041:2018 Resilient, textile, laminate and modular multilayer floor coverings - Essential characteristics
DIN EN 14146:2004-06 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency); German version EN 14146:2004
DIN EN 665:1995 Resilient floor coverings - Determination of exudation of plasticizers; German version EN 665:1994
DIN EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency); German version EN 14146:2004
DIN EN ISO 9856:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003 + Amd 1:2012); German version EN ISO 9856:2003 + A1:2012
DIN EN 12390-13:2014 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression; German version EN 12390-13:2013
DIN EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2013); German version EN ISO 21181:2013
DIN 51942:2002 Testing of carbonaceous materials - Determination of dynamic modulus of elasticity by pulse excitation - Solid materials
DIN EN 1081:2021-01 Resilient, laminate and modular multilayer floor coverings - Determination of the electrical resistance; German version EN 1081:2018+A1:2020
DIN EN 14041:2018-05 Resilient, textile, laminate and modular multilayer floor coverings - Essential characteristics; German version EN 14041:2018
DIN EN 820-5:2009-10 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures; German version EN 820-5:2009
DIN EN ISO 16581:2019-09 Resilient and laminate floor coverings - Determination of the effect of simulated movement of a furniture leg (ISO 16581:2014); German version EN ISO 16581:2019
DIN EN 13286-43:2003-07 Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures; German version EN 13286-43:2003
DIN EN 1352:1997-02 Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1352:1996
DIN 53529-1:1983-03 Testing of rubber and elastomers; measurement of vulcanization characteristics (curometry); general working principles
DIN EN 13412:2006-11 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression; German version EN 13412:2006
DIN 51942 Berichtigung 1:2006 Testing of carbonaceous materials - Determination of dynamic moduls of elasticity by pulse excitation - Solid materials, Corrigenda to DIN 51942:2002-03
DIN EN 62339-1:2007-11 Modular component interfaces for surface-mount fluid distribution components - Part 1: Elastomeric seals (IEC 62339-1:2006); German version EN 62339-1:2007

CZ-CSN, reduced modulus of elasticity

CSN 73 1360-1976 Determination of modulus of elasticity of cellular concrete
CSN 49 0116-1976 Sawn timbor Testing ní' iikkIuIus of elasticity in bending
CSN 73 1319-1968 Determination of modulus o? elasticity and deformability of concrete
CSN 49 0116-1980 Wood. Determination of the modulus of elasticity in static bending
CSN ISO 6784:1993 Concrete-Determination of static modulus of elasticity in compression
CSN 79 3819-1977 ting of leatliers. Apparent modulus iíiision elasticity, tensilc stiffncss I agreement modulus of leathers
CSN 49 0131-1982 Sawn timber. Determination of modulus of elasticity in static bending
CSN 73 6174-1994
CSN 34 6311-1984 Testing of ceramic elektrolochtiic mulo rials. Methods of determination of tin; elasticity modulus
CSN 72 5021-1973 Testing of fired ceramic materials. Determination of the modullus of elasticity in tension
CSN 64 0614-1981 Testing of plnstios. Determination f modulus of elasticity from tensile, ompresion and flexural tests

TR-TSE, reduced modulus of elasticity

TS 2478-1976 WOOD - DETERMINATION OF MODULUS OF ELASTICITY IN STATIC BENDING
TS 3502-1981 TEST METHOD FOR STATIC MODULUS OF ELASTICITY AND POISSON'S RATIC OF CONCRETE IN COMPRESSION

Association Francaise de Normalisation, reduced modulus of elasticity

NF B10-511:1975 LIMESTONE - TEST FOR DYNAMIC MODULUS OF ELASTICITY.
NF ISO 12076:2008 Câbles en acier - Détermination du module effectif d'élasticité
NF A47-207*NF ISO 12076:2008 Steel wire ropes - Determination of the actual modulus of elasticity
NF T47-111:2004 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus.
NF T47-111*NF EN ISO 9856:2017 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
NF T47-154*NF EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus
NF EN ISO 21181:2013 Courroies transporteuses légères - Détermination du module d'élasticité relaxé
NF A95-336*NF EN 23312:1993 Sintered metal materials and hardmetals. Determination of young modulus.
NF EN ISO 9856:2017 Courroies transporteuses - Détermination de l'allongement élastique et rémanent et calcul du module d'élasticité
NF T47-111/A1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus - Amendment 1.
NF B10-638*NF EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
NF EN 310:1993 Panneaux à base de bois - Détermination du module d'élasticité en flexion et de la résistance à la flexion
NF EN 14580:2005 Méthodes d'essai des pierres naturelles - Détermination du module d'élasticité statique
NF P18-430-13:2014 Testing hardened concrete - Part 13 : determination of secant modulus of elasticity in compression
NF P18-430-13*NF EN 12390-13:2021 Testing hardened concrete - Part 13 : determination of secant modulus of elasticity in compression
NF EN 12390-13:2021 Essais pour béton durci - Partie 13 : détermination du module sécant d'élasticité en compression
NF B51-124*NF EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.
FD T66-065:2018 Bitumen and bituminous binders - Determination of the complex modulus - Elasticimeter
NF P62-002*NF EN 14041:2018 Resilient, textile, laminate and modular multilayer floor coverings - Essential characteristics
NF B51-123:1987 Wood based panels. Determination of modulus of elasticity in tension and of tensile strength parallel to faces.
NF B10-631*NF EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
NF EN 14146:2004 Méthodes d'essai pour pierres naturelles - Détermination du module d'élasticité dynamique (par la mesure de la fréquence de résonance fondamentale)
NF EN 1081+A1:2020 Revêtements de sol résilients, stratifiés et multicouches modulaires - Détermination de la résistance électrique
NF EN 1081/IN1:2020 Revêtements de sol résilients, stratifiés et multicouches modulaires - Détermination de la résistance électrique
NF EN ISO 16581:2019 Revêtements de sol résilients et stratifiés - Détermination de l'effet d'un mouvement simulé d'un pied de meuble
NF EN 13286-43:2003 Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 43 : méthode d'essai pour la détermination du module d'élasticité des mélanges traités aux liants hydrauliques
NF B41-210-5*NF EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5 : determination of elastic moduli at elevated temperatures
NF EN 820-5:2009 Céramiques techniques avancées - Propriétés thermomécaniques des céramiques monolithiques - Partie 5 : détermination des modules élastiques à températures élevées
NF EN 14041:2018 Revêtements de sol résilients, textiles, stratifiés et multicouches modulaires - Caractéristiques essentielles
NF EN 15398:2020 Revêtements de sol résilients, textiles, stratifiés et modulaires à verrouillage mécanique (MMF) - Symboles normalisés pour les revêtements de sol
NF P18-938*NF EN 13412:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression.
NF EN 1352:1997 Détermination du module d'élasticité statique en compression du béton cellulaire autoclavé et du béton de granulats légers à structure ouverte
NF B51-016:1987 Wood. Static bending. Determination of modulus of elasticity in static bending using small clear specimens.
NF EN 13412:2006 Produits et systèmes de protection et de réparation des structures en béton - Méthodes d'essai - Détermination du module d'élasticité en compression

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, reduced modulus of elasticity

GB/T 14694-1993 Plastics. Determination of compressive elastic modulus
GB/T 5986-2000 Test method for modulus of elasticity of thermostat metals
GB/T 1936.2-1991 Method for determination of the modulus of elasticity in static bending of wood
GB/T 10700-1989 Test methods for elastic modulus of high performance ceramics
GB/T 3074.2-2008 Method for the determination of the elastic modulus of graphite electrodes
GB/T 1936.2-2009 Method for determination of the modulus of elasticity in static bending of wood
GB/T 3074.2-1982 Method for determination of the elastic modulus of graphite electrodes
GB/T 24191-2009 Steel wire ropes.Determination of the actual modulus of elasticity
GB/T 1943-2009 Method for determination of the modulus of elasticity in compression perpendicular to grain of wood
GB/T 15777-1995 Method for determination of the modulus of elasticity in compressive parallel to grain of wood
GB/T 15902-1995 Conveyor belts--Determination of elastic modulus
GB/T 1943-1991 Method for determination of the modulus of elasticity in compression perpendicular to grain of wood
GB/T 43013-2023 Determination of dynamic elastic modulus of chemical fibers by acoustic pulse propagation method
GB/T 10700-2006 Test methods for elastic moduli of fine ceramics (advanced ceramics,advanced technical ceramics).Bending method
GB/T 24210-2009 Test method for the elastis modulus of whole graphite electrodes.Velocity of sound
GB/T 43112-2023 Rate jump method for measuring elastic modulus of metallic materials
GB/T 15902-2009 Conveyor belts-Determination of elastic and permanent elongation and calculation of elastic modulus
GB/T 14453-1993 Metallic materials. Standard test method for the elastic modulus at high temperature. The method of disc. Vibrator
GB/T 22315-2008 Metallic materials.Determination of modulus of elasticity and Poisson's ratio
GB/T 5166-1998 Sintered metal materials and hardmetals--Determination of Young's modulus
GB/T 5166-2023 Determination of elastic modulus of sintered metal materials and cemented carbide
GB/T 11718.8-1989 Medium density fiberboard--Determination of static bending strength and elastic modulus
GB/T 25898-2010 Instrumented nanoindentation test.Indentation hardness and modulus of thin film
GB/T 22906.7-2008 Testing of cores.Part 7:Determination of flexural modulus by the three-point method
GB/T 29895-2013 Standard test methods for nondestructive evaluation of wood-based flexural members using transverse vibration
GB/T 22906.8-2008 Testing of cores.Part 8:Determination of natural frequency and flexural modulus by experimental modal analysis
GB/T 7897.6-1990 Test methods of mechanical properties of mortar for ferrocement--Test for static modulus of elasticity in compression
GB/T 28990-2012 Code for non-destructive evaluation of interior decay and modulus of elasticity of historic building wood members by stress wave methods
GB 5594.2-1985 Test method for performance of structural ceramic materials for electronic components Test method for Young's modulus of elasticity and Poisson's ratio
GB/T 5594.2-1985 Test methods for properties of structure ceramic used in electronic components--Test method for Young's elastic modulus and Poisson ratio
GB/T 1927.13-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 13:Determination of the modulus of elasticity in compression perpendicular to grain
GB/T 8812.2-2007 Rigid cellular plastics.Determination of flexural properties.Part 2: Determination of flexural strength and apparent flexural modulus of elasticity

NO-SN, reduced modulus of elasticity

NS 3676-1987 Concrete testing - Hardened concrete - Modules of elasticity in compression

RO-ASRO, reduced modulus of elasticity

STAS SR EN 310-1996 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
STAS 7168-1971 PLYWOOD Determination of the strength and moduls of elasticity bending
STAS 9994-1975 WOOD Determination of modulus of elasticity by the dynamic method
STAS 10574-1976 WOOD Detorminalion of the modulus of elasticity in shear by the dynamic method
STAS 5855-1990 CHIPBOARDS AND WOOD FIBREBOARDS Strength and elasticity modulus deter- minatiou at slalic bending

European Committee for Standardization (CEN), reduced modulus of elasticity

EN ISO 9856:1995 Conveyor Belts - Determination of Elastic Modulus (ISO 9856 : 1989)
EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus
EN ISO 9856:2016 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
EN ISO 9856:2003 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus ISO 9856:2003
EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
EN 12390-13:2013 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
EN 12390-13:2021 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength
EN ISO 9856:2003/A1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003/Amd 1:2012)
prEN 310-1992 Wood-based panels; determination of modulus elasticity, in bending and bending strength
EN 1723:1999 Light Conveyor Belts - Method of Test for the Determination of the Relaxed Elastic Modulus
EN 23312:1993 Sintered metal and hardmetals; determination of Young moduls (ISO 3312:1987)
EN 665:1994 Resilient floor coverings - Determination of exudation of plasticizers
EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures
DD ENV 843-2-1995 Advanced Technical Ceramics - Monolithic Ceramics - Mechanical Properties at Room Temperature - Part 2: Determination of Elastic Moduli

(U.S.) Ford Automotive Standards, reduced modulus of elasticity

FORD FLTM BS 105-01-2000 DETERMINATION OF FLEXURAL STRENGTH AND THE ELASTICITY MODULUS
FORD FLTM BS 105-1-2000 DETERMINATION OF FLEXURAL STRENGTH AND THE ELASTICITY MODULUS
FORD FLTM EU-BS 005-1-2000 DETERMINATION OF FLEXURAL STRENGTH AND THE ELASTICITY MODULUS (Replaces FLTM EU-BS 050-01)
FORD WSS-M4D981-B1-2013 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND PAINTED AIRBAG COVER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M2D246-A1-2004 THERMOPLASTIC POLYOLEFIN ELASTOMER, EXTERIOR PAINTABLE - LOW MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M2D348-A3-2004 POLYURETHANE ELASTOMER, REACTION INJECTION MOLDED (RIM) - HIGH FLEXURAL MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD FLTM EU-BS 005-01-2000 DETERMINATION OF FLEXURAL STRENGTH AND THE ELASTICITY MODULUS Replaces FLTM EU-BS 050-01 [Replaced: FORD FLTM EU-BS 050-01]
FORD ESB-M2D348-A3-2009 POLYURETHANE ELASTOMER, REACTION INJECTION MOLDED (RIM) - HIGH FLEXURAL MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M2D348-A3-2008 POLYURETHANE ELASTOMER, REACTION INJECTION MOLDED (RIM) - HIGH FLEXURAL MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M2D246-A3-2004 THERMOPLASTIC POLYOLEFIN ELASTOMER, PAINTABLE HIGH MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESB-M2D246-A1
FORD WSS-M4D550-A10-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 20% TALC FILLED, MEDIUM HIGH IMPACT, MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D550-A10-2013 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 20% TALC FILLED, MEDIUM HIGH IMPACT, MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D550-A10-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 20% TALC FILLED, MEDIUM HIGH IMPACT, MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D906-B1-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 20% TALC FILLED, MEDIUM HIGH IMPACT, MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD-WSS-M99P1111-A-2007 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 20% TALC FILLED, MEDIUM HIGH IMPACT, MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C945-B1-2017 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 20% TALC FILLED, MEDIUM HIGH IMPACT, MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD-WSK-M4D895-A1-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 20% TALC FILLED, MEDIUM HIGH IMPACT, MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D550-A-2021 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 15% MINERAL FILLED, MEDIUM HIGH IMPACT MOLDING COMPOUND, HIGH SCRATCH RESISTANT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M2D246-A2-2004 THERMOPLASTIC POLYOLEFIN ELASTOMER, PAINTABLE INTERMEDIATE MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESB-M2D246-A1
FORD ESB-M2D246-A3-2009 THERMOPLASTIC POLYOLEFIN ELASTOMER, PAINTABLE HIGH MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD ESB-M2D246-A1
FORD ESB-M2D246-A3-2013 THERMOPLASTIC POLYOLEFIN ELASTOMER, PAINTABLE HIGH MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESB-M2D246-A1)
FORD WSS-M4D1057-A1-2021 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 24% MINERAL FILLED, MOLD IN COLOR, HIGH IMPACT, UV STABILIZED, MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

Institute of Interconnecting and Packaging Electronic Circuits (IPC), reduced modulus of elasticity

IPC TM-650 2.4.18.3-1995 Tensile Strength, Elongation, and Modulus

国家市场监督管理总局、中国国家标准化管理委员会, reduced modulus of elasticity

GB/T 37788-2019 Test method for elastic moduli of ultra-thin glass
GB/T 37780-2019 Test method for elastic modulus，shear modulus and Poisson's ratio of glass
GB/T 38897-2020 Non-destructive testing—Measurement method for material elastic modulus and Poisson's ratio using ultrasoinc velocity
GB/T 39828-2021 Test method for determining elastic modulus of thick ceramic coating at elevated temperature
GB/T 39686-2020 Test method for determining elastic modulus and strength of thick ceramic coatings
GB/T 40406-2021 Standard test method for static modulus of elasticity and poisson's ratio of carbon materials in compression
GB/T 39682-2020 Fine ceramics—Determination of elastic modulus at high temperature or ultra-high temperature—Split ring relative method
GB/T 1927.10-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 10: Determination of modulus of elasticity in bending
GB/T 38989-2020 Uniaxial compressive elastic modulus test method of materials stabilazed with inorganic binder（middle segment method）
GB/T 9966.9-2021 Test methods for natural stone—Part 9: Determination of the dynamic modulus of elasticity by measuring the fundamental resonance frequency

Korean Agency for Technology and Standards (KATS), reduced modulus of elasticity

KS D ISO 12076-2006(2011) Steel wire ropes－Determination of the actual modulus of elasticity
KS F 2437-2013 Standard test method for dynamic modulus of elasticity, rigidity and dynamic Poisson’s ratio of concrete specimens by resonance vibration
KS F 2437-2008 Testing method for dynamic modulus of elasticity, rigidity and dynamic Poisson’s ratio of concrete specimens by resonance vibration
KS F 2437-1982 Testing method for dynamic modulus of elasticity, rigidity and dynamic Poisson’s ratio of concrete specimens by resonance vibration
KS L 1598-1994 Testing methods for elastic modulus of high performance ceramics at elevated temperature
KS L 1598-2009(2019) Testing method for elastic modulus of high performance ceramics at elevated temperature
KS D ISO 12076:2006 Steel wire ropes-Determination of the actual modulus of elasticity
KS D ISO 12076:2013 Steel wire ropes－Determination of the actual modulus of elasticity
KS L 1598-2009 Testing method for elastic modulus of high performance ceramics at elevated temperature
KS F 2376-2014 Standard test method for determining the resilient modulus of asphalt mixtures using indirect tensile mode
KS F 2438-2002 Testing method for static modulus of elasticity and Poission′s ratio in compression of cylindrical concrete specimens
KS F 2438-1982 Testing method for static modulus of elasticity and Poission′s ratio in compression of cylindrical concrete specimens
KS M ISO 6073:2003 Petroleum products-Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems
KS F 2438-2017 Testing method for static modulus of elasticity and Poission′s ratio in compression of cylindrical concrete specimens
KS F 2438-2017(2022) Testing method for static modulus of elasticity and Poission′s ratio in compression of cylindrical concrete specimens
KS M ISO 6073:2013 Petroleum products－Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems
KS F 2437-2019 Standard test method for dynamic modulus of elasticity, dynamic modulus of rigidity and dynamic Poisson’s ratio of concrete specimens by forced resonance apparatus
KS M ISO 1209-2-2012(2022) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS M ISO 1209-2-2012(2017) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS C IEC 62339-1-2014(2019) Modular component interfaces for surface-mount fluid distribution components — Part 1: Elastomeric seals

Professional Standard - Aviation, reduced modulus of elasticity

HB 5212-1982 Test method for high temperature modulus of elasticity of metals
HB 5367.11-1986 Test method for modulus of elasticity of carbon graphite sealing materials

Professional Standard - Water Conservancy, reduced modulus of elasticity

SL 237-029-1999 Code for test of soil - elastic modulus test
SL 135-2017 Calibration method of concrete dynamic elastic modulus tester

Professional Standard - Building Materials, reduced modulus of elasticity

JC/T 678-1997 Test method for Young's modulus,shear modulus and Poisson's ratio of glass material
JC/T 2172-2013 Aluminium titanate ceramic pipe for aluminium-melt feeding

RU-GOST R, reduced modulus of elasticity

GOST 18336-1973 Rigid cellular plastics. Method of test for modulus of elasticity
GOST R 50236-1992 Modified wood. Method for determination of modulus of elasticity in compression
GOST 25095-1982 Sintered hardmetals. Method of determination of elastic modulus (of Young's modulus)
GOST 210-1975 Rubber. Method for the determination of elasticity modulus at extension
GOST ISO 21181-2018 Light conveyor belts. Determination of the relaxed elastic modulus
GOST 18336-2017 Rigid cellular plastics. Method of test for compressive modulus of elasticity
GOST 16483.26-1973 Wood. Determination method of modulus of elasticity in tension along fibres
GOST 16483.27-1973 Wood. Determination method of modulus of elasticity in tension along fibres
GOST R 57603-2017 Reinforcing filler. Method for determination of tensile strength and modulus of elasticity
GOST 16483.31-1974 Wood. Resonance method for determination of modulus of elasticity and shear and decrement vibrations
GOST 9622-2016 Glued laminated wood. Methods for determination of ultimate strength and modulus of elasticity in tension
GOST 9550-1981 Plastics. Methods for determination of elasticity modulus at strength, compression and bending
GOST 9900-2013 Glass and glass products. Methods for determination of mechanical properties. Determination of elasticity modulus at cross static bending
GOST 18299-1972 Paintwork materials. Method for determination of tensile strength, relative elongation at tear and modulus of elasticity
GOST R 8.942-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data.Laser Crystals (Potassium rare-earth tungstates). Elasticity constants. Elasto-optic modules for isotropic diffraction

ACI - American Concrete Institute, reduced modulus of elasticity

ACI 364.5T-2010 Importance of Modulus of Elasticity in Surface Repair Materials

TH-TISI, reduced modulus of elasticity

TIS 1744-1999 Concrete.determination of static modulus of elasticity in compression

American National Standards Institute （ANSI), reduced modulus of elasticity

ANSI S2.24-2001 Graphical Presentation of the Complex Modulus of Viscoelastic Materials
ANSI/ASTM C747:2005 Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ANSI/ASTM D5934:1997 Test Method for Determination of the Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three Point Bending

Japanese Industrial Standards Committee (JISC), reduced modulus of elasticity

JIS R 1602:1995 Testing methods for elastic modulus of fine ceramics
JIS A 1149:2001 Method of test for static modulus of elasticity of concrete
JIS A 1149:2010 Method of test for static modulus of elasticity of concrete
JIS A 1149:2017 Method of test for static modulus of elasticity of concrete
JIS A 1149 AMD 1:2022 Method of test for static modulus of elasticity of concrete (Amendment 1)
JIS R 1605:1995 Testing methods for elastic modulus of fine ceramics at elevated temperature
JIS A 1127:2001 Methods of test for dynamic modulus of elasticity, rigidity and Poisson's ratio of concrete by resonance vibration
JIS A 1127:2010 Methods of test for dynamic modulus of elasticity, rigidity and Poisson's ratio of concrete by resonance vibration
JIS R 1644:2002 Testing methods for elastic modulus of continuous fiber-reinforced ceramic matrix composites
JIS K 7221-2:2006 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity

Danish Standards Foundation, reduced modulus of elasticity

DS/EN ISO 9856:2004 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
DS/EN ISO 9856/A1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
DS/EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus
DS/EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
DS/ISO 6073:1989 Hydraulic fluid power. Petroleum fluids. Prediction of bulk moduli
DS/EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
DS/EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
DS/EN 12390-13:2021 Testing hardened concrete – Part 13: Determination of secant modulus of elasticity in compression
DS/EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
DS/EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures
DS/EN 1352:2004 Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
DS/EN 13412:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
DS/EN 62339-1:2008 Modular component interfaces for surface-mount fluid distribution components - Part 1: Elastomeric seals

YU-JUS, reduced modulus of elasticity

JUS U.M1.025-1982 Concrete. Determination of static modulus of elasticity in compression
JUS B.F8.159-1987 Noncombustible mineral boards. Determination of.modulus ofelasticity in bending
JUS D.C8.108-1983 Testing ofparticle boards. Determination modu/us ofelasticity in bending
JUS D.A1.035-1979 Testingofwood. Determination ofmodulus ofelasticitv in static ben?ing
JUS U.J6.226-1982 Teso'ng of cellular plastics; determination of the dynamic modulus ofelasticity and the loss factor
JUS U.J6.236-1983 Testing of plastics and damped laminated systems.Bending vibration test;determination of complex modulus of elasticity

CEN - European Committee for Standardization, reduced modulus of elasticity

EN ISO 21181:2006 Light conveyor belts - Determination of the relaxed elastic modulus

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, reduced modulus of elasticity

GB/T 15777-2017 Method for determination of the modulus of elasticity in compression parallel to grain of wood
GB/T 34367-2017 Light conveyor belts—Determination of the relaxed elastic modulus
GB/T 15902-2017 Conveyor belts—Determination of elastic and permanent elongation and calculation of elastic modulus

GM Daewoo, reduced modulus of elasticity

GMKOREA EDS-T-7432-2012 Determination of Pressure Modulus and Loss Angle of Elastomers ???? ?? ???, ??? ?? ?? Version 4; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by GMW14738. [Replaced: GMKOREA
GMKOREA EDS-T-7510-2006 TESTING OF PLASTICS DETERMINATION OF THE MODULUS OF ELASTICITY BY TENSILE, COMPRESSION AND FLEXURAL TEST (VERSION: 4)

ES-UNE, reduced modulus of elasticity

UNE-EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2013) (Endorsed by AENOR in April of 2013.)
UNE-EN ISO 9856:2016 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016) (Endorsed by AENOR in December of 2016.)
UNE-EN 12390-13:2022 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
UNE-EN 14041:2018 Resilient, textile, laminate and modular multilayer floor coverings - Essential characteristics
UNE-EN 1081:2019+A1:2021 Resilient, laminate and modular multilayer floor coverings - Determination of the electrical resistance
UNE-EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures (Endorsed by AENOR in September of 2009.)
UNE-EN ISO 16581:2020 Resilient and laminate floor coverings - Determination of the effect of simulated movement of a furniture leg (ISO 16581:2014)
UNE-EN 62339-1:2007 Modular component interfaces for surface-mount fluid distribution components - Part 1: Elastomeric seals (Endorsed by AENOR in August of 2007.)

未注明发布机构, reduced modulus of elasticity

DIN EN ISO 9856:2004 Conveyor belts – determination of elastic and permanent elongation and calculation of elastic modulus
BS 1881-209:1990(1998) Testing concrete — Part 209 : Recommendations for the measurement of dynamic modulus of elasticity
BS EN 310:1993(1999) Wood - based panels — Determination of modulus of elasticity in bending and of bending strength
BS EN 1723:2000 Light conveyor belts - Method of test for the determination of the relaxed elastic modulus
BS 1881-121:1983(1998) Testing concrete — Part 121 : Method for determination of static modulus of elasticity in compression
DIN EN 1081:2019 Resilient, laminate and modular multi-layer floor coverings – determination of electrical resistance
BS 6319-6:1984(2011) Testing of resin compositions for use in construction — Part 6 : Method for determination of modulus of elasticity in compression
BS 6319-3:1990(2011) Testing of resin and polymer / cement compositions for use in construction — Part 3 : Methods for measurement of modulus of elasticity in flexure and flexural strength

Professional Standard - China Metal Association, reduced modulus of elasticity

CSM 01 01 02 03-2006 Uncertainty Evaluation of Measurement Result of Elastic Modulus of Steel Strand

Professional Standard - Machinery, reduced modulus of elasticity

JB/T 6544-1993 Drawing and bending elastic modulus of plastics - Test method

水利部, reduced modulus of elasticity

SL/T 135-2017 Calibration method of concrete dynamic elastic modulus measuring instrument

Professional Standard - Ferrous Metallurgy, reduced modulus of elasticity

YB/T 5350-2006 Method for Measuring High Temperature Elastic Modulus of Metallic Materials by Disc Oscillator Method

AENOR, reduced modulus of elasticity

UNE 53630:2010 Rubber. Determination of elasticity modulus shears. Quadruple-shear method.
UNE-EN 310:1994 WOOD-BASED PANELS. DETERMINATION OF MODULUS OF ELASTICITY IN BENDING AND OF BENDING STRENGTH.
UNE-EN 12390-13:2014 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
UNE 36745:2004 Test method for the determination of the modulus of elasticity of steel for reinforced concrete.
UNE-EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
UNE 22950-3:1990 MECHANICAL PROPERTIES OF ROCKS. STRENGTH DETERMINATION TESTS. PART 3: MODULES OF ELASTICITY (YOUNG) AND POISSON'S RATIO DETERMINATION.
UNE-ISO 1209-2:2011 Rigid cellular plastics. Determination of flexural properties. Part 2: Determination on flexural strength and apparent flexural modulus of elasticity
UNE-EN 1352:1997 Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
UNE-EN 13412:2008 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression

Lithuanian Standards Office , reduced modulus of elasticity

LST EN ISO 9856:2004 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003)
LST EN 14580-2005 Natural stone test methods - Determination of static elastic modulus
LST EN ISO 21181:2007 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2005)
LST EN 310-1999 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
LST EN 12390-13-2021 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
LST EN ISO 9856:2004/A1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003/Amd.1:2012)
LST EN 14146-2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
LST EN 1081+A1-2020 Resilient, laminate and modular multilayer floor coverings - Determination of the electrical resistance
LST EN 820-5-2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures
LST EN 1352-2000 Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
LST EN 13412-2007 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression

SG-SPRING SG, reduced modulus of elasticity

SS 78 Pt.B9-1992 Testing Concrete Part B9 : Recommendations For The Measurement Of Dynamic Modulus Of Elasticity
SS 78 Pt.A21-1987 Testing Concrete Part A21 : Method For Determination Of Static Modulus Of Elasticity In Compression

Professional Standard - Forestry, reduced modulus of elasticity

LY/T 2382-2014 Standard test method for nondestructive evaluation of lumber using stress wave

NL-NEN, reduced modulus of elasticity

NEN-EN 310-1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength

AT-ON, reduced modulus of elasticity

OENORM EN 12390-13-2021 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
ONORM EN 310-1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
OENORM EN 1081-2020 Resilient, laminate and modular multilayer floor coverings - Determination of the electrical resistance
ONORM B 3124 Teil.9-1986 Testing of natural stone; mechanical properties of rock; modulus of elasticity, stress-strain curve and poisson's ratio under uniaxial compressive loading

IT-UNI, reduced modulus of elasticity

UNI EN 12390-13-2021 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
UNI 5411-1964

Professional Standard - Electron, reduced modulus of elasticity

SJ 2317-1983 Test methods for elasticity modulus and loss factor of paper stock for loudspeakers

HU-MSZT, reduced modulus of elasticity

MSZ 15747/12-1984

Standard Association of Australia （SAA）, reduced modulus of elasticity

AS 1012.17:1997 Methods of testing concrete - Determination of the static chord modulus of elasticity and Poisson's ratio of concrete specimens
AS 1774.31.2:2001/Amdt 2:2002
AS 1774.31.1:2000/Amdt 1:2002
AS 1774.31.2:2001/Amdt 1:2001
AS 1774.31.2:2001(R2013)
AS 1774.31.1:2000(R2013)
AS/NZS 2891.13.1:2013
AS 1012.17:1997(R2014)
AS/NZS 4266.5/AMD 1:2006 Amendment No.1 to AS/NZS 4266.5-2004 Reconstituted wood-based panels--Methods of test Part 5: Modulus of elasticity in bending and bending strength

ZA-SANS, reduced modulus of elasticity

SANS 6083:2004 Modulus of elasticity and modulus of rupture in static bending of solid timber and glued laminated timber in structural sizes

The American Road & Transportation Builders Association, reduced modulus of elasticity

AASHTO T 307-1999(R2007) Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials
AASHTO DIVISION I 8.7 Modulus of Elasticity and Poisson's Ratio(Standard Specifications for Highway Bridges, Div. 1 - Design)
AASHTO T 307-1999 Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials
AASHTO T307-1999 Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials Twentieth Edition

BE-NBN, reduced modulus of elasticity

NBN-EN 23312-1993 Sintered metal materials and hardmetals. Determination of Young modulus (ISO 3312: 1987)
NBN-EN 310-1994

IN-BIS, reduced modulus of elasticity

IX-SA, reduced modulus of elasticity

AS 1012 Pt.17:1976

Professional Standard - Non-ferrous Metal, reduced modulus of elasticity

YS/T 63.13-2016 Test methods for carbon materials for aluminum - Part 13: Determination of elastic modulus

工业和信息化部, reduced modulus of elasticity

JC/T 2373-2016 Test methods for elastic modulus and flexural strength of glass pipes notched ring method

WRC - Welding Research Council, reduced modulus of elasticity

BULLETIN 180-1973 ELASTIC-PLASTIC BENDING OF A CONSTRAINED CIRCULAR PERFORATED PLATE UNDER UNIFORM PRESSURE (TRIANGULAR PENETRATION PATTERN)

American Welding Society (AWS), reduced modulus of elasticity

WRC 180:1973 Elastic-Plastic Bending of a Constrained Circular Perforated Plate Under Uniform Pressure (Triangular Penetration Pattern)

VN-TCVN, reduced modulus of elasticity

TCVN 5726-1993 Heavy weight concrete.Method for determination of prismatic compressive strength and static modulus of elasticity
TCVN 7756-6-2007 Wood based panels.Test methods.Part 6: Determination of modulus of elasticity in bending and bending strength

BELST, reduced modulus of elasticity

STB 1501-2013 Highways. Мethod of determination elastic modulus and uniformity consolidation of materials of layers of road designs

PL-PKN, reduced modulus of elasticity

PN-EN 1081+A1-2021-02 E Resilient, laminate and modular multilayer floor coverings--Determination of the electrical resistance

US-FCR, reduced modulus of elasticity

FCR COE CRD-C 166-92-1992 HANDBOOK FOR CONCRETE AND CEMENT STANDARD TEST METHOD FOR STATIC MODULUS OF ELASTICITY OF CONCRETE IN TENSION

Society of Automotive Engineers (SAE), reduced modulus of elasticity

SAE AMS-R-81828-2001 Rubber, Chlorosulfonated Polyethylene Elastomer, Sheet and Molded Shapes, Ozone Resistant
SAE AMS-R-81828A-2011 Rubber, Chlorosulfonated Polyethylene Elastomer, Sheet and Molded Shapes, Ozone Resistant

GOSTR, reduced modulus of elasticity

GOST R 57864-2017 Polymer composites. Test method for determination of through-thickness flatwise tensile strength and elastic modulus

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., reduced modulus of elasticity

ASHRAE DA-07-065-2007 Quantifying Modeling Uncertainties for the Human Thermal System

Compressed Gas Association (U.S.), reduced modulus of elasticity

CGA G-6.6-2006 STANDARD FOR ELASTOMER-TYPE CARBON DIOXIDE BULK TRANSFER HOSE THIRD EDITION

International Electrotechnical Commission (IEC), reduced modulus of elasticity

IEC PAS 62339-1:2003 Modular component interfaces for surface-mount fluid distribution components - Part 1: Elastomeric seals

NZ-SNZ, reduced modulus of elasticity

AS/NZS 4266.5:2004 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength (Incorporating Amendment 1:02/03/2006)