ZH
RU
ES

Standard material uncertainty use

Standard material uncertainty use, Total:235 items.

In the international standard classification, Standard material uncertainty use involves: Metrology and measurement in general, Graphic technology, Linear and angular measurements, Quality, Laboratory medicine, Air quality, Tobacco, tobacco products and related equipment, Non-destructive testing, Analytical chemistry, Vocabularies, Protection against fire, Optics and optical measurements, Measurement of fluid flow, Products of the textile industry, Farm buildings, structures and installations, Mechanical testing, Geology. Meteorology. Hydrology, Lubricants, industrial oils and related products, Testing of metals, Road engineering, Wastes, Ferrous metals, Construction industry, Powder metallurgy, Road vehicle systems, Plastics, Water quality, Textile auxiliary materials, Raw materials for rubber and plastics, Rubber and plastics products, Products of the chemical industry, Construction materials, Measurement of volume, mass, density, viscosity, Fuels, Natural gas, Paints and varnishes, Organic chemicals, Microbiology, Pesticides and other agrochemicals, Surface treatment and coating, Rubber, Pipeline components and pipelines, Petroleum products in general, Sterilization and disinfection.

American Society for Testing and Materials (ASTM), Standard material uncertainty use

ASTM E2655-14 Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
ASTM E2655-14(2020) Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
ASTM D7440-23 Standard Practice for Characterizing Uncertainty in Air Quality Measurements
ASTM E2536-06 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM E2655-08 Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
ASTM E2536-09 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM E2867-14(2019) Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
ASTM E2554-18 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
ASTM E2554-18e1 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
ASTM D4716-07 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
ASTM D4716/D4716M-20 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
ASTM E1756-08(2020) Standard Test Method for Determination of Total Solids in Biomass
ASTM E1756-08(2015) Standard Test Method for Determination of Total Solids in Biomass
ASTM E1756-08 Standard Test Method for Determination of Total Solids in Biomass
ASTM E1721-95 Standard Test Method for Determination of Acid-Insoluble Residue in Biomass
ASTM G213-17(2023) Standard Guide for Evaluating Uncertainty in Calibration and Field Measurements of Broadband Irradiance with Pyranometers and Pyrheliometers
ASTM D434-95 Standard Test Method for Resistance to Slippage of Yarns in Woven Fabrics Using a Standard Seam
ASTM E1486-98(2004) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM D7317-06 Standard Test Method for Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
ASTM G213-17 Standard Guide for Evaluating Uncertainty in Calibration and Field Measurements of Broadband Irradiance with Pyranometers and Pyrheliometers
ASTM D4748-10(2015) Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
ASTM D4748-10(2020) Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
ASTM E1721-01(2009) Standard Test Method for Determination of Acid-Insoluble Residue in Biomass
ASTM E1721-01 Standard Test Method for Determination of Acid-Insoluble Residue in Biomass
ASTM E1721-01(2020) Standard Test Method for Determination of Acid-Insoluble Residue in Biomass
ASTM E1721-01(2015) Standard Test Method for Determination of Acid-Insoluble Residue in Biomass
ASTM E1827-11(2017) Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
ASTM B930-03 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2008) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2012) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM D6479-15(2020) Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints
ASTM D647-88a Standard test method for determining the wrinkle resistance of fabrics used in inflatable restraints
ASTM D5557-95(2017) Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds
ASTM D7110-21 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
ASTM D7110-20 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
ASTM D7110-05 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
ASTM D7724-18(2023)e1 Standard Test Method for Carbon Black—Non-Dispersible Matter by Mechanical Flushing (NDM)
ASTM E720-16 Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics
ASTM D4095-97(2008) Standard Practice for Use of the Refractometer for Determining Nonvolatile Matter (Total Solids) in Floor Polishes
ASTM D4095-97(2014) Standard Practice for Use of the Refractometer for Determining Nonvolatile Matter &40;Total Solids&41; in Floor Polishes
ASTM E3048-19 Standard Test Method for Determination of Time to Burn-Through Using the Intermediate Scale Calorimeter (ICAL) Radiant Panel
ASTM E3048-19a Standard Test Method for Determination of Time to Burn-Through Using the Intermediate Scale Calorimeter (ICAL) Radiant Panel
ASTM E3048-17 Standard Test Method for Determination of Time to Burn-Through Using the Intermediate Scale Calorimeter (ICAL) Radiant Panel
ASTM E3048-16 Standard Test Method for Determination of Time to Burn-Through Using the Intermediate Scale Calorimeter (ICAL) Radiant Panel
ASTM C1851-18 Standard Practice for Determining the Extent of Cracking in a Sealant using the Difference between the Compressive and Tensile Modulus
ASTM D2583-13 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D2583-13a Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D7279-14 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7279-14a Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7724-11 Standard Test Method for Carbon BlackNon-Dispersible Matter by Mechanical Flushing (NDM)
ASTM D7619-10 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM C1170-91(1998)e1 Standard Test Methods for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
ASTM C1170/C1170M-20 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
ASTM C1170/C1170M-08 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
ASTM C1005-19 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
ASTM C1005-18 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
ASTM C1005-05 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
ASTM D5557-95 Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds
ASTM D5557-95(2001) Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds
ASTM D5557-95(2011) Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds
ASTM D5557-95(2006) Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds
ASTM E2554-13 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
ASTM C1574-04(2008)e1 Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation
ASTM C1574-04(2008) Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation
ASTM C1574-04(2018) Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation
ASTM E1369-15 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
ASTM D6842-02 Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making
ASTM D6842-02e1 Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making
ASTM D6842-02(2007) Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making
ASTM C1005-17 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
ASTM D2593-93(1998) Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography
ASTM D2593-93(2014) Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography
ASTM D7404-07 Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM D7404-07(2012) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM D7404-07(2016) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM D6329-98(2008) Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
ASTM E2043-99(2021) Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM A1073/A1073M-14 Standard Practice for Using Hand Micrometers to Measure the Thickness of Nonmetallic and Metallic-Coated Steel Sheet
ASTM C1231/C1231M-07 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
ASTM C1231/C1231M-00e1 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
ASTM C1231/C1231M-06 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
ASTM C1231/C1231M-15 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens
ASTM C1231/C1231M-08a Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
ASTM C1231/C1231M-09 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
ASTM D6831-02 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-11(2018) Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D5670-95(2000)e1 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
ASTM E1618-11 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM D7317-07(2013) Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
ASTM F3110-14(2018) Standard Practice for Proper Use of Mechanical Trenchless Point Repair Sleeve with Locking Gear Mechanism for Pipes of Varying Inner Diameter and Offset Joints
ASTM D6300-03 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-07 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-14ae1 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D5902-05(2015) Standard Test Method for Rubber&x2014;Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
ASTM F2331-11(2021) Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials
ASTM D8142-17 Standard Test Method for Determining Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation using Micro-Scale Environmental Test Chambers
ASTM D8142-17e1 Standard Test Method for Determining Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation using Micro-Scale Environmental Test Chambers
ASTM D5902-05(2010) Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
ASTM E2056-04 Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM E2627-10 Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
ASTM E2554-07 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method in a Single Laboratory Using a Control Sample Program
ASTM D1657-02(2007) Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM D2504-67 Standard Method Of Test For Noncondensable Gases In C3 And Lighter Hydro-Carbon Products By Gas Chromatography
ASTM E1891-10a(2015) Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM E2334-09(2018) Standard Practice for Setting an Upper Confidence Bound for a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-Conformities, Using Attribute Data, When There is a Zero Respo
ASTM E3388-23 Standard Practice for Determining Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy for High Energy Applications
ASTM D5670-95(2014) Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
ASTM D2593-23 Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography

Japanese Industrial Standards Committee (JISC), Standard material uncertainty use

JIS Z 8404-1:2006 Measurement uncertainty -- Part 1: Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
JIS Z 8404-1:2018 Measurement uncertainty -- Part 1: Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
JIS Z 2307:2017 Determination of the image unsharpness value using duplex wire-type image quality indicators
JIS Q 0033:1997 Uses of certified reference materials
JIS Q 0033:2002 Uses of certified reference materials
JIS B 7443-3:2015 Geometrical product specifications (GPS) -- Coordinate measuring machines (CMM) : Technique for determining the uncertainty of measurement -- Part 3: Use of calibrated workpieces or measurement standards
JIS B 9624:2007 Graphic technology and photography -- Certified reference materials for reflection and transmission metrology -- Documentation and procedures for use, including determination of combined standard uncertainty

Korean Agency for Technology and Standards (KATS), Standard material uncertainty use

KS X ISO 15790-2005(2020) Graphic technology and photography－Certified reference materials for reflection and transmission metrology－Documentation and procedures for use, including determination of combined standard uncertaint
KS B ISO 15530-3:2020 Geometrical product specifications(GPS) — Coordinate measuring machines(CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards
KS B ISO TR 7066-1-2004(2014) Assessment of uncertainty in calibration and use of flow measurement devices－Part 1：Linear calibration relationships
KS B ISO 7066-2:2014 Assessment of uncertainty in the calibration and use of flow measurement devices — Part 2: Non-linear calibration relationships
KS B ISO 7066-2:2004 Assessment of uncertainty in the calibration and use of flow measurement devices-Part2:Non-linear calibration relationships
KS X ISO 12645:2006 Graphic technology－Process control－Certified reference material for opaque area calibration of transmission densitometers
KS X ISO 12645-2006(2016) Graphic technology－Process control－Certified reference material for opaque area calibration of transmission densitometers
KS X ISO 12645-2006(2021) Graphic technology－Process control－Certified reference material for opaque area calibration of transmission densitometers
KS X ISO 15790:2005 Graphic technology and photography-Certified reference materials for reflection and transmission metrology-Documentation and procedures for use, including determination of combined standard uncertainty
KS B ISO 15530-3:2005 Geometrical Product Specifications(GPS)-Coordinate measuring machines(CMM):Technique for determining the uncertainty of measurement-Part 3:Use of calibrated workpieces or standards
KS B ISO 15530-3:2014 Geometrical Product Specifications(GPS)-Coordinate measuring machines(CMM):Technique for determining the uncertainty of measurement-Part 3:Use of calibrated workpieces or standards
KS B ISO 15530-3:2015 Geometrical Product Specifications(GPS) — Coordinate measuring machines(CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or standards

Association of German Mechanical Engineers, Standard material uncertainty use

VDI/VDE 2617 Blatt 11-2011 Accuracy of coordinate measuring machines - Characteristics and their checking - Determination of the uncertainty of measurement for coordinate measuring machines using uncertainty budgets
VDI/VDE 2629 Blatt 2-2012 Accuracy of contour-measuring systems - Characteristics and their checking - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces
VDI 2449 Blatt 3-2001 Measurement methods test criteria - General method for the determination of the uncertainty of calibratable measurement methods
VDI/VDE 2602 Blatt 4-2014 Surface measurement - Roughness measurement using contact (stylus) instruments - Calibration, uncertainty of measurement

American National Standards Institute （ANSI), Standard material uncertainty use

ANSI/NCSL Z540.2-1997 American National Standard for Expressing Uncertainty - U.S. Guide to the Expression of Uncertainty in Measurement
ANSI/CGATS/ISO 15790:2005 Graphic technology and photography - Certified reference materials for reflection and transmission metrology - Documentation and procedures for use, including determination of combined standard uncertainty

未注明发布机构, Standard material uncertainty use

JIS Z 8899:2023 Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles
BS ISO 13752:1998(1999) Air quality — Assessment of uncertainty of a measurement method under field conditions using a second method as reference
BS EN ISO 6974-4:2001(2002) Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 4 : Determination of nitrogen, carbon dioxide and C1 to C5 and C6 + hydrocarbons for a laboratory and on - line measuring system using two columns

British Standards Institution (BSI), Standard material uncertainty use

BS ISO 15790:2005 Graphic technology and photography - Certified reference materials for reflection and transmission metrology - Documentation and procedures for use, including determination of combined standard uncertainty
DD ISO/TS 15530-4:2008 Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement - Evaluating task-specific measurement uncertainty using simulation
BS DD ISO/TS 15530-4:2008 Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement. Evaluating task-specific measurement uncertainty using simulation
BS ISO 15790:2004 Graphic technology and photography. Certified reference materials for reflection and transmission metrology. Documentation and procedures for use, including determination of combined standard uncertainty
BS EN ISO 15530-3:2011 Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement. Use of calibrated workpieces or measurement standards
BS 7118-2:1989 Measurement of fluid flow: assessment of uncertainty in the calibration and use of flow measurement devices. Non-linear calibration relationships
BS EN ISO 21253-2:2019 Water quality. Multi-compound class methods - Criteria for the quantitative determination of organic substances using a multi-compound class analytical method
PD ISO/TS 12512:2017 Glass reinforced thermosetting plastic (GRP) pipes. Determination of initial specific ring stiffness using segment test species cut from a pipe
PD ISO/TS 17865:2016 Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
BS EN ISO 6974-4:2001 Natural gas. Determination of composition with defined uncertainty by gas chromatography. Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns

National Metrological Technical Specifications of the People's Republic of China, Standard material uncertainty use

JJF(铁道) 602-2004 Uncertainty in Measurement for Special Measuring Standards of Railway
JJF(烟草)2.1-2008 Evaluation of Uncertainty in Measurment for Parameter of Physical Characteristics of Cigarettes—Part 1:Mass
JJF(烟草) 2.1-2008 Guidelines for the Evaluation of Uncertainty in Measurement of Physical Indexes of Cigarettes - Part 1 Quality

国家药监局, Standard material uncertainty use

YY/T 1709-2020 Evaluation of measurement uncertainty of calibrators for in vitro diagnostic reagents

German Institute for Standardization, Standard material uncertainty use

DIN 53000-3:2023-07 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 3: Calibration and determination of the uncertainty of measurement
DIN EN ISO 15530-3:2018-09 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011); German version EN 15530-3:2011
DIN EN ISO 15530-3:2018 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
DIN ISO 21748:2014 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation (ISO 21748:2010); Text in German and English
DIN ISO/TS 15530-3:2008 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards (ISO/TS 15530-3:2004); German version CEN ISO/TS 15530-3:2007
DIN EN ISO 6427:1998 Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:1992); German version EN ISO 6427:1998
DIN ISO 13752:1999-01 Air quality - Assessment of the uncertainty of a measurement method under field conditions using a second method as reference (ISO 13752:1998)
DIN EN ISO 15530-3:2012 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011); German version EN 15530-3:2011
DIN EN ISO 21253-2:2022-12 Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO 21253-2:2019); German version EN ISO 21253-2:2019
DIN EN ISO 21253-2:2018 Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO/DIS 21253-2:2018); German and English version prEN ISO 21253-2:2018
DIN EN ISO 6427:2014 Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:2013); German version EN ISO 6427:2014
DIN SPEC 38402-100:2017-08 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 100: Testing for threshold violation, taking into account the measurement uncertainty using statistical and empirical methods (A 100)
DIN EN 16966:2019 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
DIN EN ISO 1 Bb.1:2004 Geometrical product specifications (GPS) - Standard reference temperature for geometrical product specification and verification - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences (ISO/TR 16015

Association Francaise de Normalisation, Standard material uncertainty use

FD X43-070-6:2019 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 6 : estimation of the uncertainties on mass concentrations of particulate matters measured automatically
XP ISO/TS 15530-4:2008 Spécification géométrique des produits (GPS) - Machines à mesurer tridimensionnelles (MMT) : technique pour la détermination de l'incertitude de mesure - Partie 4 : évaluation de l'incertitude de mesure spécifique d'une tâche à l'aide de s...
XP E11-158-4*XP ISO/TS 15530-4:2008 Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 4: Evaluating task-specific measurement uncertainty using simulation
NF EN ISO 15530-3:2011 Spécification géométrique des produits (GPS) - Machines à mesurer tridimensionnelles (MMT) : Technique pour la détermination de l'incertitude de mesure - Partie 3 : utilisation de pièces étalonnées ou d'étalons de mesure
NF ISO 21748:2017 Lignes directrices relatives à l'utilisation d'estimations de la répétabilité, de la reproductibilité et de la justesse dans l'évaluation de l'incertitude de mesure
NF ISO 7066-2:1988 Évaluation de l'incertitude dans l'étalonnage et l'utilisation des appareils de mesure du débit - Partie 2 : relations d'étalonnage non linéaires.
FD X07-021:1999 Fundamental standards - Metrology and application of the statistics - Help to the process for the estimation and the use of the measurement and test results uncertainty
FD X43-070-1:2018 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambiant air - Part 1 : general
NF T47-749:2020 Détermination des critères de contrôles et de qualités pour la classification des pneus de véhicules légers de réemploi (PR)
FD A06-500*FD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
NF E11-160-3*NF EN ISO 15530-3:2011 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): technique for determining the uncertainty of measurement - Part 3 : use of calibrated workpieces or measurement standards
FD X43-070-3:2008 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 3 : Estimation of the uncertainties on measurements of benzene conducted in situ by diffusion tube followed by a thermal desorpt
FD X43-070-7:2011 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 7 : estimation of the uncertainties on measurements of benzo[a]pyrene conducted in situ on PM10 fraction
NF T51-039*NF EN ISO 6427:2014 Plastics - Determination of matter extractable by organic solvents (conventional methods)
FD X43-070-8:2011 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 8 : estimation of the uncertainties on measurements of Pb, Cd, As and Ni conducted in situ in the PM10 fraction
FD X43-070-2:2015 Air quality - Practical guidance for estimating the uncertainty of measurement of pollutant concentration in ambient air - Part 2 : estimation of the uncertainties associated with the automated measurements of SO2, NO, NOx, NO2, O3 and CO carried out on s
FD X43-070-4:2008 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 4 : estimation of the uncertainties on on-site diffusion tube measurements of nitrogen dioxide, followed by a laboratory spectro
NF T90-253-2*NF EN ISO 21253-2:2019 Water quality - Multi-compound class methods - Part 2 : criteria for the quantitative determination of organic substances using a multi-compound class analytical method
NF A09-205-5*NF EN ISO 19232-5:2018 Non-destructive testing - Image quality of radiographs - Part 5 : determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators
FD X43-070-5:2008 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 5 : Estimation of the uncertainties on measurements of benzene conducted in situ by pumping followed by a thermal desorption and
NF X43-602*NF EN 16966:2018 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
NF EN ISO 6647-2:2020 Riz - Détermination de la teneur en amylose - Partie 2 : méthode spectrophotométrique de routine sans mode opératoire de dégraissage et avec étalonnage à l'aide d'étalons de riz

KR-KS, Standard material uncertainty use

KS B ISO 15530-3-2020 Geometrical product specifications(GPS) — Coordinate measuring machines(CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards

ZA-SANS, Standard material uncertainty use

SANS 605:2007 Uses of certified reference materials

International Organization for Standardization (ISO), Standard material uncertainty use

ISO GUIDE 30:1992/Amd 1:2008 Terms and definitions used in connection with reference materials Amendment 1 Revision of definitions for reference material and certified reference material
ISO 7066-1:1989 Assessment of uncertainty in the calibration and use of flow measurement devices; part 1: linear calibration relationships
ISO/TS 15530-4:2008 Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 4: Evaluating task-specific measurement uncertainty using simulation
ISO 7066-2:1988 Assessment of uncertainty in the calibration and use of flow measurements devices; part 2: non-linear calibration relationships
ISO/TS 15530-3:2004 Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards
ISO 15790:2004 Graphic technology and photography - Certified reference materials for reflection and transmission metrology - Documentation and procedures for use, including determination of combined standard uncertainty
ISO 15530-3:2011 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards
ISO 6974-1:2012/cor 1:2012 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition; Technical Corrigendum 1
ISO/TS 17865:2016 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems

Danish Standards Foundation, Standard material uncertainty use

DS/ISO/TS 15530-4:2008 Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 4: Evaluating task-specific measurement uncertainty using simulation
DS/EN ISO 15530-3:2012 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards
DS/CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
DS/EN ISO 6974-3:2001 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns
DS/EN ISO 6974-6+Corr.1:2006 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
DS/EN ISO 6974-4:2001 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns
DS/EN ISO 6974-5:2001 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns

Lithuanian Standards Office , Standard material uncertainty use

LST EN ISO 15530-3:2012 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
LST EN ISO 6974-6:2005 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns (ISO 6974-6:2002)
LST EN ISO 6974-5:2003 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns (ISO 6974-
LST EN ISO 6974-3:2003 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns (ISO 6974-3:2000)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Standard material uncertainty use

GB/T 29820.1-2013 Assessment of uncertainty in calibration and use of flow measurement devices.Part 1:Linear calibration relationships
GB/T 24635.3-2009 Geometrical Product Specification(GPS)-Coordinate measuring machines(CMM):Technique for determining the uncertainty of measurement-Part 3: Use of calibrated workpieces or standards

GOSTR, Standard material uncertainty use

GOST R 8.980-2019 State system for ensuring the uniformity of measurements. Standard reference data. The critical temperatures and critical pressures of thermo unstable substances
GOST R 8.967-2019 State system for ensuring the uniformity of measurements. Transfer units of time, frequency and time scale national UTC(SU) from the State primary standard of the Russian Federation with the use of the GLONASS system. Classification. Measurement uncertain

European Committee for Standardization (CEN), Standard material uncertainty use

CEN ISO/TS 15530-3:2007 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards
PD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
EN ISO 15530-3:2011 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
EN ISO 3233-3:2015 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of

IEC - International Electrotechnical Commission, Standard material uncertainty use

PAS 62204-2000 Standard Method for Measuring and Using the Temperature Coefficient of Resistance to Determine the Temperature of a Metallization Line (Edition 1.0)

BE-NBN, Standard material uncertainty use

NBN-ISO 7066-1:1990 Schatting van de onnauwkeurigheden bij net ijken en het gebruik van debietmeetinstrumenten - Deel 1 : Lineaire ijkingsverhoudingen

未注明发布机构, Standard material uncertainty use

JIS Z 8899:2023 Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles
BS ISO 13752:1998(1999) Air quality — Assessment of uncertainty of a measurement method under field conditions using a second method as reference
BS EN ISO 6974-4:2001(2002) Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 4 : Determination of nitrogen, carbon dioxide and C1 to C5 and C6 + hydrocarbons for a laboratory and on - line measuring system using two columns

ES-UNE, Standard material uncertainty use

UNE-EN ISO 21253-2:2020 Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO 21253-2:2019)

(U.S.) Ford Automotive Standards, Standard material uncertainty use

FORD WSS-M1H863-A-2003 FABRIC, TWILL INDIA PATTERN, WOVEN DOBBY, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D293-B3-2006 POLYPROPYLENE (PP) HOMOPOLYMER, HEAT STABILIZED, 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** (USE WSS-M4D638-B)

RU-GOST R, Standard material uncertainty use

GOST R ISO 4967-2009 Steel. Determination of content of nonmetallic inclusions. Micrographic method using standard diagrams

AASHTO - American Association of State Highway and Transportation Officials, Standard material uncertainty use

TP37-1993 Standard Test Method for Determining the Condition Rating of Performed Membranes on Concrete Bridge Decks Using Pulse Velocity
TP 63-2003 Standard Method of Test for Determining Rutting Susceptibility of Asphalt Paving Mixtures Using the Asphalt Pavement Analyzer (APA)
TP1-1993 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) (Edition 1B)
TP 124-2016 Standard Method of Test for Determining the Fracture Potential of Asphalt Mixtures Using Semicircular Bend Geometry (SCB) at Intermediate Temperature
TP9-1994 Standard Test Method for Determining the Creep Compliance and Strength of Hot Mix Asphalt (HMA) Using the Indirect Tensile Test Device (Edition 1C)
TP9-1996 Standard Test Method for Determining the Creep Compliance and Strength of Hot Mix Asphalt (HMA) Using the Indirect Tensile Test Device (2000 Edition)

AENOR, Standard material uncertainty use

UNE-EN ISO 6974-3:2003 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns. (ISO 6974-3:2000)
UNE-EN ISO 6974-6:2006 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns (ISO 6974-6:2002)
UNE-EN ISO 6974-4:2003 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns. (ISO 6974-4:20

国家市场监督管理总局、中国国家标准化管理委员会, Standard material uncertainty use

GB/T 39518-2020 Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems

CEN - European Committee for Standardization, Standard material uncertainty use

EN 16966:2018 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration@ surface area concentration and mass concentration