ZH
RU
ES

Mechanical strength testing equipment

Mechanical strength testing equipment, Total:499 items.

In the international standard classification, Mechanical strength testing equipment involves: Construction equipment, Electronic display devices, Leather technology, Electromechanical components for electronic and telecommunications equipment, Protective equipment, Plant and equipment for the food industry, Headgear. Clothing accessories. Fastening of clothing, Testing of metals, Agricultural machines, implements and equipment, Refrigerating technology, Continuous handling equipment, Acoustics and acoustic measurements, Chipless working equipment, Measurement of fluid flow, Industrial automation systems, Semiconductor devices, Components for electrical equipment, Earth-moving machinery, Electrical engineering in general, Sports equipment and facilities, On-board equipment and instruments, Railway rolling stock, Metalliferous minerals, Earthworks. Excavations. Foundation construction. Underground works, Aircraft and space vehicles in general, Adhesives, Plastics, Linear and angular measurements, Materials for aerospace construction, Paint ingredients, Insulating fluids, Reinforced plastics, Optoelectronics. Laser equipment, Power stations in general, Mechanical structures for electronic equipment, Mechanical testing, Packaging materials and accessories, Ground service and maintenance equipment, Safety of machinery, Electrical equipment for working in special conditions, Storing. Warehousing, Elements of buildings, Analytical chemistry, Electrical and electronic testing, Fibre optic communications, Lifting equipment, Iron and steel products.

YU-JUS, Mechanical strength testing equipment

JUS N.R4.422-1978 Electromechanical components for electronk equipment. Test methods. Test 7b: Mechanical strength impact test
JUS N.R4.461-1990 Electromechanicai components for electronic equipment. Test methods. Test 16c: Contact bending strength
JUS N.A5.041-1987 Verification mechanical strength resistance ageinst impact. Impact-test apparatus
JUS C.A4.053-1986 Mechanical testing of metals. Determination of transverse rupturestrength of hardmetals
JUS N.R4.462-1979 Electromechanical components for electronic equipment. Test methods. Test 16 d: Tensile strength (arimped cormecttons)
JUS N.R4.493-1989 Electromechanical components for electronic equipment. Test methods. Test 16p: Torsional strength,. fixed male tabs
JUS N.A5.044-1988 Verification mechanical strength resistance against inpact. Sprlng-operate? impact-te?t apparatvs
JUS N.R4.426-1977 Electromechanical components for electronic equipment. Test methods. Test 9a: Mechanical operation (Endurance)

Professional Standard - Construction Industry, Mechanical strength testing equipment

JG/T 5057.31-1995 Construction machinery and equipment.High strength plain washers---Normal series
JG/T 5057.32-1995 Construction machinery and equipment.High strength plain washers--Smatl series
JG/T 5057.33-1995 Construction machinery and equipment.High strength plain washers--Large series
JG/T 5057.1-1995 Construction machinery and equipment.High strength hexagon head bolts
JG/T 5057.23-1995 Construction machinery and equipment.High strength hexagon thick nuts
JG/T 5057.24-1995 Construction machinery and equipment.High strength hexagon thin nuts
JG/T 5057.25-1995 Construction machinery and equipment.High strength large hexagon nuts
JG/T 5057.2-1995 Construction machinery and equipment.High strength bolts with hexagon head.Full thread
JG/T 5057.4-1995 Construction machinery and equipment.High strength bolts with large hexagon head
JG/T 5057.9-1995 Construction machinery and equipment.High strength studs with double end (clamping type)
JG/T 5057.21-1995 Construction machinery and equipment.High strength hexagon nuts,style 1
JG/T 5057.22-1995 Construction machinery and equipment.High strength hexagon nuts,style 2
JG/T 5057.3-1995 Construction machinery and equipment.High strength bolts with hexagon head.Reduced shank
JG/T 5057.5-1995 Construction machinery and equipment.High strength bolts with hexagon head---Fine pitch thread
JG/T 5057.7-1995 Construction machinery and equipment.High strength bolts with hexagon flange
JG/T 5057.28-1995 Construction machinery and equipment.High strength hexagon thin nuts---Fine pitch thread
JG/T 5057.29-1995 Construction machinery and equipment.High strength hexagon nuts with flange
JG/T 5057.35-1995 Construction machinery and equipment.High strength square taper washers for slot section
JG/T 5057.40-1995 Construction machinery and equipment.Specification of high strength fasteners
JG/T 5057.10-1995 Construction machinery and equipment.High strength screw with hecagon socket cap head
JG/T 5057.26-1995 Construction machinery and equipment.High strength hexagon nuts,style 1--Fine pitch thread
JG/T 5057.27-1995 Construction machinery and equipment.High strength hexagon nuts,style 2-Fine pitch thread
JG/T 5057.34-1995 Construction machinery and equipment.High strength square taper washers for 工 section
JG/T 5057.8-1995 Construction machinery and equipment.High strength bolts with hexagon flange-reduced shank
JG/T 5057.6-1995 Construction machinery and equipment.High strength bolts with hexagon head-fine pitch thread-full thread

VE-FONDONORMA, Mechanical strength testing equipment

CZ-CSN, Mechanical strength testing equipment

CSN 66 8223-1975 Testiag of tlie mechanical strengtb of electric detonators
CSN 44 1328-1970 Drum Test for Mechanical Strength of Coke (Irsid)
CSN 35 4055 Cast.22-1984 Electromechanical components for electronic equipment. Robustness of actuating lever test
CSN 35 8071 Cast.13-1988 Variable resistors. Testing method of mechanical strength of operating shaft
CSN IEC 749:1994 Semiconductor devices.Mechanical and climatic test methods
CSN 47 0178-1987 Agricultural and forest machines and tractors. Testing methods of visibility and illumination. Safety of work
CSN IEC 512-8:1994 Electromechanical components for electronic equipment, basic testing procedures and measuring methods. Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations
CSN 35 4055 Cast.13-1984 Electromechanical components for electronic equipment. Current - temperature derating test
CSN 49 0151-1975 Testing of physioal and mechanical pro- pertiea of hardboarda and ehipboards. Tensile strenght perpendicular to board plane

PL-PKN, Mechanical strength testing equipment

PN Z70000-15-1991 Medical electrical equipment echanical robustness eneral re?uirements and tests
PN M55679-1958 Machine tools -- Grinding machines for tools -- Testing of accuracy
PN-EN IEC 61631-2021-02 E Test method for the mechanical strength of cores made of magnetic oxides (IEC 61631:2020)
PN M47001-1988 Earth-moving machinery nd e?uipment for construction urposes ests Classification and principles f carrying them out
PN E06300-15-1990 Electrical appliances for household use and similar purposes General requirements and tests procedures Mechanical strength
PN-EN ISO 3376-2020-10 E Leather - Physical and mechanical tests - Determination of tensile strength and percentage elongation (ISO 3376:2020)
PN D56285-1985 Woodworking machines Auxiliary e?uipment for vertical frame sawing machines Test of accuracy
PN T05127-1987 Electromechanical components for electronic e?uipment; basie testing procedures and measuring methods Mechanical operating tests and sealing tests
PN M06518-1992 Cranes and related equipment - Accuracy requirements for measuring parameters during testing
PN T05128-1988 Electromechanical components tor electronic e?uipment; basie testing procedures and measuring methods Connector tests (mechanical) and mechanical tests on contacts and terminations
PN T04550-1960 Components for radio- communication e?ulpment. Climatic and raechanical robustness testing procedur?
PN T05126-1987 Eicctromechanical components for elctronic equipment; basie testing procedures and mcasuring methods Climatic tests and solderini: tests

HU-MSZT, Mechanical strength testing equipment

RO-ASRO, Mechanical strength testing equipment

STAS 10208-1975 ICE-HOCKEY STICKS Test ol strength to mechanical stresses
STAS 12312-1985 MACHINES AND EQCPMKNTS FOR BUILDINGS Visibility lctprminatioii
STAS 1275-1988 Tests of concretes TESTS OF HARDENED CONCRETE Determination of mechanical strengthes
STAS 10201-1975 LAWN TENNIS RACKETS Methods for testing the strength to mechanical stresses
STAS SR 13384-1997 Agricultural machinery - Equipment for transplanting -Methods of testing
STAS 12743/8-1991 Electromechanical components for electronic equipment BASIC TESTING PROCEDURES AND MEASURING METHODS Mechanical tests on connectors, contacts and terminations
STAS 12743/7-1989 Electromechanical components for electronic equipment BASIC TESTING PROCEDURES AND MEASURING METHODS Mechanical operating tests and sealing tests
STAS 11979-1983 Mining equipment HIGH PRESSURE HYDRAULIC. AGGREGATES FOR MECHANIZED FACE SUPPORTS Test methods

Association Francaise de Normalisation, Mechanical strength testing equipment

NF EN ISO 2418:2023 Cuir - Essais chimiques, physiques, mécaniques et essais de solidité - Emplacement et préparation des spécimens pour les essais
NF S76-020-6*NF ISO 16900-6:2021 Respiratory protective devices - Methods of test and test equipment - Part 6 : mechanical resistance/strength of components and connections
NF EN 1915-2/IN1:2010 Matériels au sol pour aéronefs - Exigences générales - Partie 2 : exigences de stabilité et de résistance mécanique, calculs et méthodes d'essai
NF EN 1915-2+A1:2010 Matériels au sol pour aéronefs - Exigences générales - Partie 2 : exigences de stabilité et de résistance mécanique, calculs et méthodes d'essai
NF G91-103:1990 Fermetures auto-agrippantes - Caractéristiques de résistance mécanique - Méthodes d'essai.
NF EN IEC 61631:2020 Méthode d'essai pour la résistance mécanique des noyaux en oxydes magnétiques
NF EN 60512-16-20:1997 Composants électromécaniques pour équipements électroniques. Procédures d'essai de base et méthodes de mesure - Partie 16 : essais mécaniques des contacts et des sorties. Section 20 : essai 16t : tenue mécanique (sortie câblée de connexions ...
NF EN 60512-16-4:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-4 : essais mécaniques des contacts et des sorties - Essai 16d : résistance à la traction (connexions serties)
NF C93-400-7-2*NF EN 60512-7-2:2012 Connectors for electronic equipment - Tests and measurements - Part 7-2 : impact Tests (free connectors)- Test 7b : mechanical strength impact
NF EN 60512-16-17:2009 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-17 : essais mécaniques des contacts et des sorties - Essai 16q : résistance à la traction et à la compression des languettes fixes
NF EN 772-10:1999 Méthodes d'essai des éléments de maçonnerie - Partie 10 : détermination de la teneur en humidité des éléments de maçonnerie en silico-calcaire et en béton cellulaire autoclavé.
NF T47-131*NF EN ISO 1120:2012 Conveyor belts - Determination of strength of mechanical fastenings - Static test method
NF T47-131:1983 Conveyor belts. Determination of strength of mecanical fastenings. Static test method.
NF C93-400-16-3*NF EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3 : mechanical tests on contacts and terminations - Test 16c : contact-bending strength
NF G52-005:2007 Leather - Physical and mechanical tests - Measurement of stitch tear resistance.
NF EN 1265+A1:2009 Sécurité des machines - Code d'essai acoustique pour machines et équipements de fonderie
NF EN 1265/IN1:2009 Sécurité des machines - Code d'essai acoustique pour machines et équipements de fonderie
NF C93-474-20:1997 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 16 : MECHANICAL TESTS ON CONTACTS AND TERMINATIONS. SECTION 20 : TEST 16T : MECHANICAL STRENGTH (WIRED TERMINATION OF SOLDERLESS CONNECTIONS). (EUR
NF G52-002*NF EN ISO 3376:2020 Leather - Physical and mechanical tests - Determination of tensile strength and percentage elongation
NF EN ISO 3376:2020 Cuir - Essais physiques et mécaniques - Détermination de la résistance à la traction et du pourcentage d'allongement
NF C93-400-16-4*NF EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4 : mechanical tests on contacts and terminations - Test 16d : tensile strength (crimped connections).
NF C93-400-16-20*NF EN 60512-16-20:1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 16 : mechanical tests on contacts and terminations. Section 20 : test 16t : mechanical strength (wired termination of solderless connections).
NF C93-400-16-16*NF EN 60512-16-16:2009 Connectors for electronic equipment - Tests and measurements - Part 16-16 : mechanical tests on contacts and terminations - Test 16p : Torsional strength, fixed male tabs
NF C93-400-16-14*NF EN 60512-16-14:2009 Connectors for electronic equipment - Tests and measurements - Part 16-14 : mechanical tests on contacts and terminations - Test 16n : Bending strength, fixed male tabs
NF G52-030:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method.
NF G52-002:2012 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension.
NF ISO 10055:2014 Vibrations mécaniques - Exigences requises pour les essais de vibrations des équipements de bord et des composants des machines
NF E58-157:2008 Earth-moving machinery - Hazard detection systems and visual aids - Performance requirements and tests.
NF EN 17869:2023 Quincaillerie d'ameublement - Méthodes d'essai pour détermination de la résistance mécanique et rigidité de ferrures d'assemblage de corps de meuble
NF EN 1651/IN1:2020 Équipement pour le parapente - Sellettes pour parapente - Exigences de sécurité et essais de résistance
NF C93-400-16-17*NF EN 60512-16-17:2009 Connectors for electronic equipment - Tests and measurements - Part 16-17 : mechanical tests on contacts and terminations - Test 16q : Tensile and compressive strength, fixed male tabs
NF EN 61587-2:2014 Structures mécaniques pour équipements électroniques - Essais pour la IEC 60917 et la IEC 60297 - Partie 2 : essais sismiques pour baies et bâtis
NF EN 60512-9-1:2010 Connecteurs pour équipements électroniques - Essais et mesures - Partie 9-1 : essais d'endurance - Essai 9a : fonctionnement mécanique
NF EN 12276:2013 Équipement d'alpinisme et d'escalade - Coinceurs mécaniques - Exigences de sécurité et méthodes d'essai
NF EN IEC 61010-2-034:2021 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-034 : exigences particulières applicables aux appareils de mesure de la résistance d'isolement et aux appareils d'essai pour l'essai de rigi...
NF EN 60512-16-21:2012 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-21 : essai mecanique des contacts et des sorties - Essai 16u : essai des trichites au moyen de l'application de contraintes mécaniques extérieures
NF EN 926-1:2015 Équipement pour le parapente - Parapentes - Partie 1 : exigences et méthodes d'essai concernant la résistance de la structure
NF E60-601-3*NF EN ISO 11553-3:2013 Safety of machinery - Laser processing machines - Part 3 : noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2)
NF C42-020-2-034/A11*NF EN IEC 61010-2-034/A11:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034 : particular requirements for measurement equipment for insulation resistance and test equipment for electric strength
NF C42-020-2-034*NF EN IEC 61010-2-034:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034 : particular requirements for measurement equipment for insulation resistance and test equipment for electric strength
NF EN 60512-7-2:2012 Connecteurs pour équipements électroniques - Essais et mesures - Partie 7-2 : essais d'impact (fiches)- Essai 7b : résistance mécanique aux chocs
NF EN 60512-13-1:2006 Connecteurs pour équipements électroniques - Essais et mesures - Partie 13-1 : essais de fonctionnement mécanique - Essai 13a : forces d'accouplement et de désaccouplement
NF EN ISO 12001:2009 Acoustique - Bruit émis par les machines et équipements - Règles pour la préparation et la présentation d'un code d'essai acoustique
NF C93-400-16-6*NF EN 60512-16-6:2008 Connectors for electronic equipment - Tests and measurements - Part 16-6 : mechanical tests on contacts and terminations - Test 16f : robustness of terminations
NF EN 60512-13-2:2006 Connecteurs pour équipements électroniques - Essais et mesures - Partie 13-2 : essais de fonctionnement mécanique - Essai 13b : forces d'insertion et d'extraction
NF EN 60512-13-5:2006 Connecteurs pour équipements électroniques - Essais et mesures - Partie 13-5 : essais de fonctionnement mécanique - Essai 13e : méthode de polarisation et de codage

British Standards Institution (BSI), Mechanical strength testing equipment

BS IEC 62715-6-3:2020 Flexible display devices - Mechanical test methods. Impact and hardness tests
BS EN 60512-16-20:1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Mechanical tests on contacts and terminations. Test 16t. Mechanical strength (wired termination of solderless connections)
BS EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations – Test 16c: Contact-bending strength
BS EN 60512-7-2:2012 Connectors for electronic equipment. Tests and measurements. Impact tests (free connectors). Test 7b. Mechanical strength impact
BS ISO 16900-6:2021 Respiratory protective devices. Methods of test and test equipment. Mechanical resistance/strength of components and connections
14/30270406 DC BS ISO 16900-6. Respiratory protective devices. Methods of test and test equipment. Part 6. Mechanical resistance/strength of components and connections
20/30360126 DC BS ISO 16900-6. Respiratory protective devices. Methods of test and test equipment. Part 6. Mechanical resistance/strength of components and connections
BS EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations — Test 16d: Tensile strength (crimped connections)
BS IEC 62715-6-1:2018 Flexible display devices. Mechanical test methods. Deformation tests
BS EN ISO 1120:2012 Conveyor belts. Determination of strength of mechanical fastenings. Static test method
BS EN 60512-16-16:2008 Connectors for electronic equipment – Tests and measurements –– Part 16-16: Mechanical tests on contacts and terminations – Test 16p: Torsional strength, fixed male tabs
BS EN 60512-16-14:2008 Connectors for electronic equipment – Tests and measurements –– Part 16-14: Mechanical tests on contacts and terminations – Test 16n: Bending strength, fixed male tabs
BS EN ISO 3376:2020 Leather. Physical and mechanical tests. Determination of tensile strength and percentage elongation
BS 6911-3:1990 Testing earth-moving machinery - Measurement of tool forces of hydraulic excavators
BS EN 1651:2018+A1:2020 Paragliding equipment. Harnesses. Safety requirements and strength tests
BS G 259:1996 Aircraft equipment. Environmental and operating conditions for airborne equipment. Humidity, temperature and pressure tests
BS EN ISO 3376:2011 Leather. Physical and mechanical tests. Determination of tensile strength and percentage extension
19/30394521 DC BS EN IEC 61631. Test method for the mechanical strength of cores made of magnetic oxides
BS IEC 61747-40-6:2018 Liquid crystal display devices. Mechanical testing of display cover glass for mobile devices. Retained biaxial flexural strength (abraded ring-on-ring)
BS EN 60512-16-17:2008 Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations – Test 16q: Tensile and compressive strength, fixed male tabs
19/30352642 DC BS IEC 62715-6-3. Flexible display devices. Part 6-3. Mechanical test methods. Impact and hardness tests
BS EN 60512-9-1:2010 Connectors for electronic equipment - Tests and measurements - Endurance tests - Test 9a - Mechanical operation
BS IEC 61747-40-4:2015 Liquid crystal display devices. Mechanical testing of display cover glass for mobile devices. Biaxial flexural strength (ring-on-ring)
BS EN IEC 60749-28:2022 Tracked Changes. Semiconductor devices. Mechanical and climatic test methods. Electrostatic discharge (ESD) sensitivity testing. Charged device model (CDM). device level
BS EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
BS G 260:1996 Environmental tests for aircraft equipment. Steady-state acceleration
BS 5350-C6:1990 Methods of test for adhesives - Adhesively bonded joints: mechanical tests - Determination of bond strength in direct tension in sandwich panels
BS EN IEC 61496-1:2020 Safety of machinery. Electro-sensitive protective equipment - General requirements and tests
19/30371416 DC BS EN ISO 3376. Leather. Physical and mechanical tests. Determination of tensile strength and percentage extension
BS 2782-3 Methods 340A and 340B:1978 Methods of testing plastics - Mechanical properties - Determination of shear strength of moulding material - Determination of shear strength of sheet material
BS 6911-2:1990 Testing earth-moving machinery - Measurement of tool forces and tipping loads of loaders
BS IEC 62047-38:2021 Semiconductor devices. Micro-electromechanical devices. Test method for adhesion strength of metal powder paste in MEMS interconnection
BS 6911-13:1998 Testing earth-moving machinery - Methods of measuring the masses of whole machines, their equipment and components
20/30419235 DC BS EN 60749-28. Semiconductor devices. Mechanical and climatic test methods. Part 28. Electrostatic discharge (ESD) sensitivity testing. Charged device model (CDM). Device level
19/30392556 DC BS EN 1651 AMD1. Paragliding equipment. Harnesses. Safety requirements and strength tests
BS EN IEC 60749-10:2022 Tracked Changes. Semiconductor devices. Mechanical and climatic test methods. Mechanical shock. device and subassembly
BS IEC 61747-40-5:2018 Liquid crystal display devices. Mechanical testing of display cover glass for mobile devices. Strength against dynamic impact by a sharp object with the specimen rigidly supported
BS 2782-3 Method 341A:1977 Methods of testing plastics - Mechanical properties - Determination of apparent interlaminar shear strength of reinforced plastics
BS EN ISO 11553-3:2013 Safety of machinery. Laser processing machines. Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2)
BS EN IEC 61010-2-034:2021+A11:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength
BS IEC 62047-27:2017 Semiconductor devices. Micro-electromechanical devices - Bond strength test for glass frit bonded structures using micro-chevron-tests (MCT)
22/30449506 DC BS EN ISO 2418. Leather. Chemical, physical, mechanical and fastness tests. Position and preparation of specimens for testing
BS EN ISO 2418:2023 Tracked Changes. Leather. Chemical, physical, mechanical and fastness tests. Position and preparation of specimens for testing
BS 5350-C15:1990 Methods of test for adhesives - Adhesively bonded joints: mechanical tests - Determination of bond strength in compressive shear
PD IEC TR 62715-6-21:2022 Flexible display devices. Mechanical test methods. Foldable durability test for foldable display set
BS 5350-C1:1986 Methods of test for adhesives - Adhesively bonded joints: mechanical tests - Determination of cleavage strength of adhesive bonds
21/30435579 DC BS EN 60749-10. Semiconductor devices. Mechanical and climatic test methods. Part 10. Mechanical shock. Device and subassembly

未注明发布机构, Mechanical strength testing equipment

DIN EN IEC 61631:2022 Test method for determining the mechanical strength of (IEC 61631:2020)
BS 2782-3-Methods 340A and 340B:1978(1999) Methods of testing Plastics — Part 3 : Mechanical properties — Method 340A : Determination of shear strength of moulding material — Method 340B : Determination of shear strength of sheet material

Standard Association of Australia （SAA）, Mechanical strength testing equipment

AS/NZS ISO 16900.6:2022 Respiratory protective devices — Methods of test and test equipment, Method 6: Mechanical resistance/strength of components and connections
AS 4076.1:1992 Conveyor belts - Determination of strength of mechanical fastenings - Static test method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Mechanical strength testing equipment

GB/T 30410-2013 Leather machines.Leather bursting strength tester
GB/T 12736-2009 Conveyor belts.Determination of strenght of mechanical fastenings.Static test method
GB/T 12736-1991 Conveyor belts--Determination of strength of mechanical fastening--Static test method
GB/T 17928-2023 Determination of pinhole tear strength for physical and mechanical tests of leather
GB/T 22840-2008 Electrical equipment of industrial machines.Test specifications for surge immunity
GB/T 24112-2009 Electrical equipment of industrial machines.Electrostatic discharge immunity test specifications
GB/T 24111-2009 Electrical equipment of industrial machines.Electrical fast transient/burst immunity test specifications
GB/T 22841-2008 Test specification for immunity to voltage dips and short interruptions of industrial machinery and electrical equipment
GB/T 15972.31-2008 Specifications for optical fibre test methods.Part 31:Measurement methods and test procedures for mechanical characteristics.Tensile strength

SE-SIS, Mechanical strength testing equipment

SIS SMS 2334-1970 Mechanical couplings for tractors and trailers Testing of strength
SIS SMS 2508-1974 Refrigerators and freezers for household use. Testing of mechanical strength of shelves
SIS SS 3635-1990 Road vehicles — Mechanical couplings for towing vehicles and trailers — Strength requirement and strength testing
SIS SS-IEC 749:1991 Semiconductor devices - Mechanical and climatic test methods
SIS SS 2334-1985 Road vehicles - Mechanical couplings for towing vehicles and trailers - Testing of strength
SIS SS 426 01 65-1979 Rotating electrical machinery — Test of the insulation of bars and coils of high voltage machines

German Institute for Standardization, Mechanical strength testing equipment

DIN EN 60512-16-4:2009-03 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections) (IEC 60512-16-4:2008); German version EN 60512-16-4:2008 / Note: DIN IEC 60512-8 ...
DIN EN 60512-16-3:2009-03 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (IEC 60512-16-3:2008); German version EN 60512-16-3:2008 / Note: DIN IEC 60512-8 (1994-05) rema...
DIN 51717:2016-04 Testing of solid fuels - Determination of mechanical strength of coke
DIN EN 1265:2009-07 Safety of machinery - Noise test code for foundry machines and equipment; German version EN 1265:1999+A1:2008 / Note: DIN EN 1265 (2000-02) remains valid alongside this standard until 2009-12-28.
DIN EN 60512-16-16:2009-03 Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs (IEC 60512-16-16:2008); German version EN 60512-16-16:2008 / Note: DIN IEC 60512-8 ...
DIN EN 60512-16-14:2009-03 Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs (IEC 60512-16-14:2008); German version EN 60512-16-14:2008 / Note: DIN IEC 60512-8 (1...
DIN EN 60512-16-20:1997-03 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations; section 20: Test 16t: Mechanical strength (wired termination of solderless connections) (IE...
DIN EN 60512-16-17:2009-03 Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs (IEC 60512-16-17:2008); German version EN 60512-16-17:2008 / Note: DI...
DIN EN IEC 61631:2022-12 Test method for the mechanical strength of cores made of magnetic oxides (IEC 61631:2020); German version EN IEC 61631:2020 / Note: DIN EN 61631 (2002-08) remains valid alongside this standard until 2023-06-11.
DIN EN 60512-16-3:2009 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (IEC 60512-16-3:2008); German version EN 60512-16-3:2008
DIN EN ISO 3376:2020-08 Leather - Physical and mechanical tests - Determination of tensile strength and percentage elongation (ISO 3376:2020); German version EN ISO 3376:2020
DIN EN 60512-16-16:2009 Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs (IEC 60512-16-16:2008); German version EN 60512-16-16:2008
DIN EN ISO 1120:2013-04 Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2012); German version EN ISO 1120:2012
DIN EN ISO 23910:2019 Leather - Physical and mechanical tests - Measurement of stitch tear resistance (ISO 23910:2019)
DIN EN ISO 16001:2018-09 Earth-moving machinery - Object detection systems and visibility aids - Performance requirements and tests (ISO 16001:2017); German version EN ISO 16001:2017
DIN EN 1651:2022-02 Paragliding equipment - Harnesses - Safety requirements and strength tests; German version EN 1651:2018+A1:2020
DIN EN 60512-16-14:2009 Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs (IEC 60512-16-14:2008); German version EN 60512-16-14:2008
DIN EN ISO 3376:2003 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2002); German version EN ISO 3376:2002
DIN EN ISO 3376:2012 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2011); German version EN ISO 3376:2011
DIN EN 60512-16-4:2009 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections) (IEC 60512-16-4:2008); German version EN 60512-16-4:2008
DIN 18137-2:1990 Soil, testing procedures and testing equipment; determination of shear strength; triaxial test
DIN EN ISO 16001:2018 Earth-moving machinery - Object detection systems and visibility aids - Performance requirements and tests (ISO 16001:2017)
DIN EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006); English version of DIN EN ISO 22288:2009-04
DIN EN 60749-22:2003-12 Semiconductor devices - Mechanical and climatic test methods - Part 22: Bond strength (IEC 60749-22:200 + Corr. 1:2003); German version EN 60749-22:2003 / Note: Under certain conditions, DIN EN 60749 (2002-09) remains valid alongside this standard unti...
DIN EN ISO 2418:2023-05 Leather - Chemical, physical, mechanical and fastness tests - Position and preparation of specimens for testing (ISO 2418:2023); German version EN ISO 2418:2023
DIN EN 61747-10-1:2014-06 Liquid crystal display devices - Part 10-1: Environmental, endurance and mechanical test methods - Mechanical (IEC 61747-10-1:2013); German version EN 61747-10-1:2013 / Note: DIN EN 61747-5 (1999-02) remains valid alongside this standard until 2016-08-14.
DIN EN 60512-16-17:2009 Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs (IEC 60512-16-17:2008); German version EN 60512-16-17:2008
DIN EN ISO 3378:2003 Leather - Physical and mechanical tests; Determination of resistance to grain cracking and grain crack index (ISO 3378:2002); German version EN ISO 3378:2002
DIN EN ISO 3376:2020 Leather - Physical and mechanical tests - Determination of tensile strength and percentage elongation (ISO 3376:2020)
DIN EN 60512-16-20:1997 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations; section 20: Test 16t: Mechanical strength (wired termination of solderless connections) (IEC 6
DIN EN 60749-19:2011-01 Semiconductor devices - Mechanical and climatic test methods - Part 19: Die shear strength (IEC 60749-19:2003 + A1:2010); German version EN 60749-19:2003 + A1:2010 / Note: DIN EN 60749-19 (2003-10) remains valid alongside this standard until 2013-09-01.
DIN EN 60512-7-2:2012 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact (IEC 60512-7-2:2011); German version EN 60512-7-2:2012
DIN EN ISO 2418:2023 Leather - Chemical, physical, mechanical and fastness tests - Position and preparation of specimens for testing (ISO 2418:2023)
DIN EN 926-1:2016-02 Paragliding equipment - Paragliders - Part 1: Requirements and test methods for structural strength; German version EN 926-1:2015
DIN EN 17353:2020-11 Protective clothing - Enhanced visibility equipment for medium risk situations - Test methods and requirements; German version EN 17353:2020 / Note: DIN EN 1150 (1999-02) and DIN EN 13356 (2001-12) remain valid alongside this standard until 2023-08-31.
DIN EN 60512-13-2:2006-11 Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces (IEC 60512-13-2:2006); German version EN 60512-13-2:2006 / Note: DIN IEC 60512-7 (1994-05) remains valid al...
DIN EN 60512-13-2 Berichtigung 1:2008-11 Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces (IEC 60512-13-2:2006); German version EN 60512-13-2:2006, Corrigendum to DIN EN 60512-13-2:2006-11; German ...
DIN EN IEC 60749-37:2023 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer (IEC 47/2651/CDV:2020); German and English version prEN IEC 60749-37:2020
DIN EN 60512-13-1 Berichtigung 1:2008-11 Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces (IEC 60512-13-1:2006); German version EN 60512-13-1:2006, Corrigendum to DIN EN 60512-13-1:2006-11; German v...
DIN EN 60512-13-5 Berichtigung 1:2008-11 Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method (IEC 60512-13-5:2006); German version EN 60512-13-5:2006, Corrigendum to DIN EN 60512-13-5:2006-11; German ver...
DIN EN 60512-13-5:2006-11 Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method (IEC 60512-13-5:2006); German version EN 60512-13-5:2006 / Note: DIN IEC 60512-7 (1994-05) remains valid along...
DIN EN 60512-13-1:2006-11 Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces (IEC 60512-13-1:2006); German version EN 60512-13-1:2006 / Note: DIN EN 60512-13-1 (1997-06) remains valid a...

ES-UNE, Mechanical strength testing equipment

UNE-EN 60512-7-2:2011 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact (Endorsed by AENOR in April of 2012.)
UNE-EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements -- Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (Endorsed by AENOR in February of 2009.)
UNE-EN IEC 61631:2020 Test method for the mechanical strength of cores made of magnetic oxides (Endorsed by Asociación Española de Normalización in August of 2020.)
UNE-EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements -- Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections) (Endorsed by AENOR in November of 2008.)
UNE-EN 60512-16-14:2008 Connectors for electronic equipment - Tests and measurements -- Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs (Endorsed by AENOR in February of 2009.)
UNE-EN 60512-16-16:2008 Connectors for electronic equipment - Tests and measurements -- Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs (Endorsed by AENOR in February of 2009.)
UNE-EN 60512-16-17:2008 Connectors for electronic equipment - Tests and measurements -- Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs (Endorsed by AENOR in February of 2009.)
UNE-EN ISO 3376:2021 Leather - Physical and mechanical tests - Determination of tensile strength and percentage elongation (ISO 3376:2020)
UNE-EN ISO 16001:2018 Earth-moving machinery - Object detection systems and visibility aids - Performance requirements and tests (ISO 16001:2017)
UNE-EN 1651:2018+A1:2021 Paragliding equipment - Harnesses - Safety requirements and strength tests
UNE-EN 61747-10-1:2013 Liquid crystal display devices - Part 10-1: Environmental, endurance and mechanical test methods – Mechanical (Endorsed by AENOR in November of 2013.)
UNE-EN 61587-2:2011 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 2: Seismic tests for cabinets and racks (Endorsed by AENOR in February of 2012.)
UNE-EN 60512-9-1:2010 Connectors for electronic equipment - Tests and measurements -- Part 9-1: Endurance tests - Test 9a: Mechanical operation (Endorsed by AENOR in August of 2010.)
UNE-EN ISO 2418:2023 Leather - Chemical, physical, mechanical and fastness tests - Position and preparation of specimens for testing (ISO 2418:2023)
UNE-EN 60512-16-21:2012 Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses (Endorsed by AENOR in September of 2012.)
UNE-EN 926-1:2016 Paragliding equipment - Paragliders - Part 1: Requirements and test methods for structural strength
UNE-EN 1915-2:2001+A1:2009 Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods (Endorsed by AENOR in May of 2009.)
UNE-EN IEC 61496-1:2021 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
UNE-EN 61496-1:2014/AC:2015 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
UNE-EN IEC 61010-2-034:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength (Endorsed by Asociación Españ...
UNE-EN IEC 61010-2-034:2021/A11:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength (Endorsed by Asociación Españ...
UNE-EN 60512-13-2:2006 CORR:2007 Connectors for electronic equipment - Tests and measurements -- Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces
UNE-EN 61557-14:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery (Endorsed...
UNE-EN 60512-13-1:2006 CORR:2007 Connectors for electronic equipment - Tests and measurements -- Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces
UNE-EN 60512-13-5:2006 CORR:2007 Connectors for electronic equipment - Tests and measurements -- Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method

International Organization for Standardization (ISO), Mechanical strength testing equipment

ISO 16900-6:2021 Respiratory protective devices — Methods of test and test equipment — Part 6: Mechanical resistance/strength of components and connections
ISO 1120:2002 Conveyor belts - Determination of strength of mechanical fastenings - Static test method
ISO 1120:1984 Conveyor belts; Determination of strength of mechanical fastenings; Static test method
ISO 1120:2012 Conveyor belts - Determination of strength of mechanical fastenings - Static test method
ISO 16900-6:2015 Respiratory protective devices - Methods of test and test equipment - Part 6: Mechanical resistance/strength of components and connections
ISO 1120:1976 Conveyor belts — Determination of strength of mechanical fastenings — Static test method
ISO 3376:2020 | IULTCS/IUP 6 Leather — Physical and mechanical tests — Determination of tensile strength and percentage elongation
ISO 3376:2002 | IULTCS/IUP 6 Leather — Physical and mechanical tests — Determination of tensile strength and percentage extension
ISO 3376:2011 | IULTCS/IUP 6 Leather — Physical and mechanical tests — Determination of tensile strength and percentage extension
ISO 3376:2002 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension
ISO 3376:2011 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension
ISO 22288:2006 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
ISO 2418:2023|IULTCS/IUP 2 Leather — Chemical, physical, mechanical and fastness tests — Position and preparation of specimens for testing
ISO 16001:2008 Earth-moving machinery - Hazard detection systems and visual aids - Performance requirements and tests
ISO 3378:2002 Leather - Physical and mechanical tests - Determination of resistance to grain cracking and grain crack index
ISO 2418:2023 | IULTCS/IUP 2 Leather — Chemical, physical, mechanical and fastness tests — Position and preparation of specimens for testing
ISO 179-2:1997/Amd 1:2011 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test - Amendment 1: Precision data
ISO 11553-3:2013 Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2)

Danish Standards Foundation, Mechanical strength testing equipment

DS/EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
DS/EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
DS/EN 60512-16-20:1997 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20, Test 16t: Mechanical strength (wired termination of solderless connections)
DS/EN 60512-16-14:2008 Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs
DS/EN 60512-16-16:2008 Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs
DS/EN 1265+A1:2009 Safety of machinery - Noise test code for foundry machines and equipment
DS/EN 60512-7-2:2012 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact
DS/EN 60512-16-17:2008 Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs
DS/EN ISO 1120:2012 Conveyor belts - Determination of strength of mechanical fastenings - Static test method
DS/EN ISO 3376:2012 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension
DS/EN 62047-9:2011 Semiconductor devices - Micro-electromechanical devices - Part 9: Wafer to wafer bonding strength measurement for MEMS
DS/EN 61747-10-1:2013 Liquid crystal display devices - Part 10-1: Environmental, endurance and mechanical test methods - Mechanical
DS/IEC 512-8:1995 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations
DS/EN 60749-37:2008 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer
DS/EN 60749-19/A1:2010 Semiconductor devices - Mechanical and climatic test methods - Part 19: Die shear strength
DS/EN 60749-19:2003 Semiconductor devices - Mechanical and climatic test methods - Part 19: Die shear strength
DS/EN 60512-9-1:2010 Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation
DS/EN 61587-2:2012 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 2: Seismic tests for cabinets and racks
DS/EN 60512-16-21:2012 Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses
DS/EN 1915-2+A1:2009 Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods
DS/EN 60749-30/A1:2011 Semiconductor devices - Mechanical and climatic test methods - Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing
DS/EN 60749-30:2005 Semiconductor devices - Mechanical and climatic test methods - Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing
DS/EN 60749-34:2011 Semiconductor devices - Mechanical and climatic test methods - Part 34: Power cycling
DS/EN 60512-13-1/Corr. 1:2007 Connectors for electronic equipment – Tests and measurements – Part 13-1: Mechanical operation tests – Test 13a: Engaging and separating forces
DS/EN 60512-13-1:2006 Connectors for electronic equipment – Tests and measurements – Part 13-1: Mechanical operation tests – Test 13a: Engaging and separating forces
DS/EN 60512-13-2/Corr. 1:2007 Connectors for electronic equipment – Tests and measurements – Part 13-2: Mechanical operation tests – Test 13b: Insertion and withdrawal forces
DS/EN 60512-13-2:2006 Connectors for electronic equipment – Tests and measurements – Part 13-2: Mechanical operation tests – Test 13b: Insertion and withdrawal forces
DS/EN 60512-13-5/Corr. 1:2007 Connectors for electronic equipment – Tests and measurements – Part 13-5: Mechanical operation tests – Test 13e: Polarizing and keying method
DS/EN 60512-13-5:2006 Connectors for electronic equipment – Tests and measurements – Part 13-5: Mechanical operation tests – Test 13e: Polarizing and keying method

ES-AENOR, Mechanical strength testing equipment

Indonesia Standards, Mechanical strength testing equipment

SNI 05-6042-1999 Testing method of star feeder iodized salt machinery performance
SNI ISO 3376:2012 Leather - Physical and mechanical tests -Determination of tensile strength and percentage extension

AENOR, Mechanical strength testing equipment

UNE 22950-4:1992 MECHANICAL PROPERTIES OF ROCKS. STRENGTH DETERMINATION TESTS. PART 4: TRIAXIAL COMPRESSION STRENGTH
UNE 22950-1:1990 MECHANICAL PROPERTIES OF ROCKS. STRENGTH DETERMINATION TESTS. PART 1. UNIAXIAL COMPRESSIVE STRENGTH
UNE-EN 60512-16-20:1999 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 16: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS. SECTION 20: TEST 16T: MECHANICAL STRENGHT (WIRED TERMINATION OF SOLDERLESS CONNECTIONS).
UNE 22950-2:1990 MECHANICAL PROPERTIES OF ROCKS. STRENGTH DETERMINATION TESTS. PART 2: TENSILE STRENGTH. INDIRECT DETERMINATION (BRAZILIAN TEST).
UNE 18146:1983 CONVEYOR BELTS. DETERMINATION OF STRENGTH OF MECHANICAL FASTENINGS. STATIC TEST METHOD.
UNE-EN 1265:2000+A1:2009 Safety of machinery - Noise test code for foundry machines and equipment
UNE 22950-5:1996 MECHANICAL PROPERTIES OF ROCKS. STRENGTH DETERMINATION TESTS. PART 5: POINT LOAD TEST.
UNE-EN 1651:2000 PARAGLIDING EQUIPMENT - HARNESSES - SAFETY REQUIREMENTS AND STRENGTH TESTS
UNE-EN ISO 23910:2008 Leather - Physical and mechanical tests - Measurement of stitch tear resistance (ISO 23910:2007)
UNE-EN ISO 1120:2012 Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2012)
UNE 20606-8/2C:1983 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS. CONNECTOR TEST (MECHANICAL) AND MECHANICAL TEST ON CONTACTS AND TERMINATIONS
UNE 20606-8:1981 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS. CONNECTOR TESTS (MECHANICAL) AND MECHANICAL TESTS ON CONTACTS AND TERMINATIONS
UNE 20606-8/1C:1982 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS. CONNECTOR (MECHANICAL) TESTS AND MECHANICAL TESTS ON CONTACTS AND TERMINATIONS
UNE 80116:1986 TEST METHODS OF CEMENTS. PHYSICAL ANALYSIS. MECHANICAL STRENGTH DETERMINATION OF QUICKLY-SETTING NATURAL CEMENTS
UNE 68055:1982 AGRICULTURAL MACHINERY. EQUIPMENT FOR CROP PROTECTION. SPRAYERS NOZZLES. TEST METHODS
UNE-EN ISO 3376:2012 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2011)
UNE 26249:1998 ROAD VEHICLES. TOWING VEHICLE COUPLING DEVICE TO TOW CARAVANS OR LIGHT TRAILERS. MECHANICAL STRENGTH TEST.
UNE-EN 60749-30:2005/A1:2011 Semiconductor devices - Mechanical and climatic test methods - Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing

International Electrotechnical Commission (IEC), Mechanical strength testing equipment

IEC 60512-7-2:2011 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact
IEC 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
IEC 60512-16-14:2008 Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs
IEC 60512-16-20:1996 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20: Test 16t: Mechanical strength (wired termination of solderless connections)
IEC 60512-16-16:2008 Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs
IEC 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
IEC 60749-37:2022 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer
IEC 61747-40-1:2019 Liquid crystal display devices - Part 40-1: Mechanical testing of display cover glass for mobile devices - Guidelines
IEC 61747-40-4:2015 Liquid crystal display devices - Part 40-4: Mechanical testing of display cover glass for mobile devices - Biaxial flexural strength (Ring-on-ring)
IEC 60512-16-17:2008 IEC 60512-16-17, Ed. 1.0: Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs
IEC 61747-40-6:2018 Liquid crystal display devices - Part 40-6: Mechanical testing of display cover glass for mobile devices - Retained biaxial flexural strength (abraded ring-on-ring)
IEC 61496-1:2020 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests

RU-GOST R, Mechanical strength testing equipment

GOST 25.502-1979 Strength analysis and testing in machine building. Methods of metals mechanical testing. Methods of fatigue testing
GOST R IEC 62715-6-3-2021 Flexible display devices. Part 6-3. Mechanical test methods. Impact and hardness tests
GOST 31373-2008 Wheelsets of locomotives and motor-powered units. Strength calculations and tests
GOST R 51838-2001 Safety of machinery. Electrical equipment for industrial machins. Test methods
GOST R 51838-2012 Safety of machinery. Electrical equipment for industrial machins. Test methods
GOST 20784-1975 Manganese ore concentrates and agglomerates. Methods of sampling and sample preparation for mechanical strength determination
GOST 25.505-1985 Design, calculation and strength testing. Methods of mechanical testing of metals. Method of testing on the low cycle fatigue at heat mechanical loading
GOST 25.602-1980 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures
GOST 25.506-1985 Design, calculation and strength testing. Methods of mechanical testing of metals. Determination of fracture toughness characteristics under the static loading
GOST 25.603-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for tensile properties of ring specimens at normal, elevated and low temperatures
GOST 25.604-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for bending properties at normal, elevated and low temperatures
GOST 25.507-1985 Strength calculation and testing in machine building. Methods of fatigue testing under service loading. General requirements
GOST R 51242-1998 Mechanical protective constructions and electromechanical protective constructions for doorways and windows ventings. Technical requirements and test methods for breaking resistance

Korean Agency for Technology and Standards (KATS), Mechanical strength testing equipment

KS B 6359-2008(2018) Testing method for mechanical transport refrigeration units
KS B 6359-1983 Testing method for mechanical transport refrigeration units
KS B 6359-2023 Testing method for mechanical transport refrigeration units
KS B 6961-2007 Test methods for mechanical strength of service robots-Part 1:Load test
KS M ISO 1120:2002 Conveyor belt-Determination of strength of mechanical fastenings-Static test method
KS M ISO 3376:2019 Leather — Physical and mechanical tests — Determination of tensile strength and percentage extension
KS B ISO 1120:2018 Conveyor belt — Determination of strength of mechanical fastenings — Static test method
KS C IEC 60512-16-20:2005 Electromechanical components for electronic equipment-Basic testing procedures and measuring methods-Part 16:Mechanical tests on contacts and terminations-Section 20:Test 16t:Mechanical strength(wired termination of solderless connections)
KS C IEC 60512-16-20-2005(2010) Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 16：Mechanical tests on contacts and terminations－Section 20：Test 16t：Mechanical strength(wired
KS C IEC 60512-16-20:2014 Electromechanical components for electronic equipment-Basic testing procedures and measuring methods-Part 16:Mechanical tests on contacts and terminations-Section 20:Test 16t:Mechanical strength(wired termination of solderless connections)
KS C IEC 61631-2006(2016) Test method for the mechanical strength of cores made of magnetic oxides
KS M ISO 3376:2004 Leather-Physical and mechanical tests-Determination of tensile strength and percentage extension
KS M ISO 3376:2014 Leather — Physical and mechanical tests — Determination of tensile strength and percentage extension
KS M ISO 22288:2008 Leather-Physical and mechanical tests-Determination of flex resistance by the vamp flex method
KS C IEC 60749-22:2020 Semiconductor devices — Mechanical and climatic test methods — Part 22: Bond strength
KS M ISO 3378:2004 Leather－Physical and mechanical tests－Determination of resistance to grain cracking and grain crack index
KS C IEC 60749-19:2020 Semiconductor devices — Mechanical and climatic test methods — Part 19: Die shear strength
KS C 2001-1998(2018)
KS C IEC 60512-7-2014(2019) Electromechanical components for electronic equipment — Basic testing procedures and measuring methods — Part 7: Mechanical operating tests and sealing tests
KS C IEC 61496-1:2019 Safety of machinery — Electro-sensitive protective equipment — Part 1: General requirements and tests
KS B ISO 9373-2015(2020) Cranes and related equipment — Accuracy requirements for measuring parameters during testing
KS B ISO 19432-2014(2019) Building construction machinery and equipment — Portable, hand-held, internal combustion engine driven cut-off machines — Safety requirements and testing

European Committee for Standardization (CEN), Mechanical strength testing equipment

EN ISO 1120:2012 Conveyor belts - Determination of strength of mechanical fastenings - Static test method
EN 1265:1999+A1:2008 Safety of machinery - Noise test code for foundry machines and equipment
EN ISO 5674:2004 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria ISO 5674:2004
EN ISO 5674:2009 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)
EN ISO 3376:2020 Leather - Physical and mechanical tests - Determination of tensile strength and percentage elongation (ISO 3376:2020)
EN ISO 3376:2011 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2011)
EN ISO 1120:2002 Conveyor Belts - Determination of Strength of Mechanical Fastenings - Static Test Method ISO 1120: 2002
EN ISO 3376:2002 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension ISO 3376:2002
EN 13335:2002 Leather - Physical and Mechanical Tests - Determination of Flex Resistance by the Vamp Flex Method
EN 1152:1994 Tractors and Machinery for Agriculture and Forestry - Guards for Power Take-Off (PTO) Drive Shafts - Wear and Strength Tests
EN ISO 11553-3:2013 Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2)
EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method [Superseded: CEN EN 13335]

Lithuanian Standards Office , Mechanical strength testing equipment

LST EN 1265-2001+A1-2009 Safety of machinery - Noise test code for foundry machines and equipment
LST EN 60512-16-3-2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (IEC 60512-16-3:2008)
LST EN 60512-16-20-2001 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 16: Mechanical tests on contacts and terminations. Section 20: Test 16t: Mechanical strength (wired termination of solderless connections) (IEC 605
LST EN 60512-16-4-2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections) (IEC 60512-16-4:2008)
LST EN 61631-2002 Test method for the mechanical strength of cores made of magnetic oxides (IEC 61631:2001)
LST EN 60512-16-16-2008 Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs (IEC 60512-16-16:2008)
LST EN 60512-16-14-2008 Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs (IEC 60512-16-14:2008)
LST EN ISO 23910:2008 Leather - Physical and mechanical tests - Measurement of stitch tear resistance (ISO 23910:2007)
LST EN ISO 1120:2013 Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2012)
LST EN 60512-16-17-2008 Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs (IEC 60512-16-17:2008)
LST EN 60512-7-2-2012 Connectors for electronic equipment - Tests and measurements -- Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact (IEC 60512-7-2:2011)
LST EN 60749-5-2004 Semiconductor devices - Mechanical and climatic test methods. Part 5: Steady-state temperature humidity bias life test (IEC 60749-5:2003)
LST EN IEC 60749-15:2020 Semiconductor devices - Mechanical and climatic test methods - Part 15: Resistance to soldering temperature for through-hole mounted devices (IEC 60749-15:2020)
LST EN 61747-5-3-2010 Liquid crystal display devices - Part 5-3: Environmental, endurance and mechanical test methods - Glass strength and reliability (IEC 61747-5-3:2009, modified)
LST EN ISO 3376:2012 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2011)
LST EN 60512-16-21-2012 Connectors for electronic equipment - Tests and measurements -- Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses
LST EN 60749-22-2004 Semiconductor devices. Mechanical and climatic test methods. Part 22: Bond strength (IEC 60749-22:2002)
LST EN 1915-2-2002+A1-2009 Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods
LST EN IEC 61010-2-034/A11:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength
LST EN 61300-2-15-2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-15: Tests - Torque strength of coupling mechanism (IEC 61300-2-15:2008)
LST EN 61300-2-6-2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-6: Tests - Tensile strength of coupling mechanism (IEC 61300-2-6:2010)
LST EN 60749-37-2008 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer (IEC 60749-37:2008)

Japanese Industrial Standards Committee (JISC), Mechanical strength testing equipment

JIS C 5402-7-2:2019 Connectors for electronic equipment -- Tests and measurements -- Part 7-2: Impact tests (free connectors) -- Test 7b: Mechanical strength impact
JIS C 5402-16-20:2002 Connectors for electronic equipment -- Tests and measurements -- Part 16-20: Mechanical tests on contacts and terminations -- Test 16t: Mechanical strength (wired termination of solderless connections)
JIS C 5402-16-3:2014 Connectors for electronic equipment -- Tests and measurements -- Part 16-3: Mechanical tests on contacts and terminations -- Test 16c: Contact-bending strength
JIS K 6557-2:2016 Leather -- Physical and mechanical tests -- Determination of tensile strength and percentage extension
JIS C 5402-16-4:2012 Connectors for electronic equipment -- Tests and measurements -- Part 16-4: Mechanical tests on contacts and terminations -- Test 16d:Tensile strength (crimped connections)
JIS A 8338:2021 Earth-moving machinery -- Object detection systems and visibility aids -- Performance requirements and tests
JIS A 8338:2011 Earth-moving machinery -- Hazard detection systems and visual aids -- Performance requirements and tests
JIS K 6557-10:2018 Leather -- Physical and mechanical tests -- Determination of distension and strength of surface (Ball burst method)
JIS C 62610-2:2021 Mechanical structures for electrical and electronic equipment -- Thermal management for cabinets -- Part 2: Method for the determination of forced air cooling

GOSTR, Mechanical strength testing equipment

GOST 34630-2019 Agricultural machinery. Machinery for crop protection. Spraying equipment. Test methods
GOST R 58205-2018 Mining. Determination of strength of conveyor belt mechanical fastenings. Static test method
GOST R 52990.7-2010 Noise of machines. Textile machinery. Noise test code. Part 7. Dyeing and finishing machinery and equipment
GOST R IEC 62715-6-1-2017 Flexible display devices. Part 6-1. Mechanical stress test methods
GOST IEC 61496-1-2016 Safety of machinery. Electro-sensitive protective equipment. Part 1. General requirements and tests

AT-ON, Mechanical strength testing equipment

ONORM M 9632-1998 Mechanical equipment on stages - Test procedures
ONORM B 3124 Teil.4-1981 Testing of natural stone; Mechanical properties of rock; Uniaxial tensile strength (Brazilian Test)
ONORM B 3124 Teil.3-1981 Testing of natural stone; Mechanical properties of rock; Uniaxial tensile strength (direct tension test)
ONORM B 3124 Teil.2-1981 Testing of natural stone; Mechanical properties of rock; Uniaxial compressive strength of cubical specimens
ONORM B 3124 Teil.1-1981 Testing ot natural stone; Mechanical properties of rock; Uniaxial compressive strength ot cylindrical specimens

PT-IPQ, Mechanical strength testing equipment

NP 2612-1988 Agricultural machinery Agricultural wheeled tractors. Determination of maximum travei speed
NP 2617-1984
NP 2827-2.35-1991 Basic environmental testing procedures Part 2: Tests Test Fdc: Random vibration wide band. Reproductibility high
NP 2827-2.37-1991 Basic environmental testing procedures Part 2: Tests Test Fdc: Random vibration wide band. Reproductibility low
NP 2827-2.36-1991 Basic environmental testing procedures Part 2: Tests Test Fdc: Random vibration wide band. Reproductibility médium
NP 2621-1984
NP 2610-1984
NP 2609/6-1984

European Committee for Electrotechnical Standardization（CENELEC）, Mechanical strength testing equipment

EN IEC 60749-10:2022 Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock - Device and subassembly
EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
EN 60512-7-2:2012 Connectors for electronic equipment - Tests and measurements Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact
EN 60512-16-20:1996 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 16: Mechanical Tests on Contacts and Terminations Section 20: Test 16t: Mechanical Strength (Wired Termination of Solderless Connections)
EN 60512-16-14:2008 Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs
EN 60512-16-16:2008 Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs
EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
EN 60512-16-17:2008 Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs
EN IEC 60749-37:2022 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer
EN 60512-16-21:2012 Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses
EN IEC 61010-2-034:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength
EN IEC 60749-30:2020 Semiconductor devices - Mechanical and climatic test methods - Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing
EN 60749-34:2010 Semiconductor devices - Mechanical and climatic test methods - Part 34: Power cycling

国家市场监督管理总局、中国国家标准化管理委员会, Mechanical strength testing equipment

GB/T 12736-2021 Conveyor belts—Determination of strenght of mechanical fastenings—Static test method
GB/T 15972.31-2021 Specifications for optical fibre test methods—Part 31: Measurement methods and test procedures for mechanical characteristics—Tensile strength

KR-KS, Mechanical strength testing equipment

KS M ISO 3376-2019 Leather — Physical and mechanical tests — Determination of tensile strength and percentage extension
KS B ISO 1120-2018 Conveyor belt — Determination of strength of mechanical fastenings — Static test method
KS C IEC 60749-22-2020 Semiconductor devices — Mechanical and climatic test methods — Part 22: Bond strength
KS C IEC 62715-6-3-2023 Flexible display devices — Part 6-3: Mechanical test methods — Impact and hardness tests
KS C IEC 60749-19-2020 Semiconductor devices — Mechanical and climatic test methods — Part 19: Die shear strength
KS C IEC 61496-1-2019 Safety of machinery — Electro-sensitive protective equipment — Part 1: General requirements and tests

CEN - European Committee for Standardization, Mechanical strength testing equipment

EN ISO 5674:2006 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (Corrected 2005-07-01)

Professional Standard - Light Industry, Mechanical strength testing equipment

QB/T 2710-2005 Leather-Physical and mechanical tests-Determination of tensile strength and percentage extension
QB/T 1269-2012 Fur.Physical and mechanical tests.Determination of tensile strength and percentage extension
QB/T 2712-2005 Leather-Physical and mechanical tests-Determination of distension and strength of grain-Ball burst test

VN-TCVN, Mechanical strength testing equipment

TCVN 7121-2014 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension
TCVN 7121-2007 Leather.Physical and mechanical tests.Determination of tensile strength and percentage extension

工业和信息化部, Mechanical strength testing equipment

QB/T 2710-2018 Physical and mechanical testing of leather Determination of tensile strength and elongation

CO-ICONTEC, Mechanical strength testing equipment

ICONTEC 1247-1981

American Society for Testing and Materials (ASTM), Mechanical strength testing equipment

ASTM F3104-21 Standard Test Methods for Evaluating Design and Performance Characteristics of Externally Loaded Strength Training Equipment, Strength Training Benches and External Weight Storage Equipment
ASTM D387-00 Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller
ASTM D387-00(2008) Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller
ASTM D387-00(2017) Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller
ASTM F2824-10(2020) Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
ASTM F2824-10(2015) Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
ASTM A1108-17 Standard Test Method for Determining the Ultimate Strength of Deep Corrugated Structural Plate Bolted Longitudinal Lapped Seams

BR-ABNT, Mechanical strength testing equipment

ABNT MB-451 Pt.1-1971

CU-NC, Mechanical strength testing equipment

NC 34-62-1988 Agricultural Machineries and Implements. Agricultural Equipment Test. Terms and Definitions

AT-OVE/ON, Mechanical strength testing equipment

OVE EN IEC 60749-10:2021 Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock - device and subassembly (IEC 47/2692/CDV) (english version)

Association of German Mechanical Engineers, Mechanical strength testing equipment

VDI/VDE/DGQ 2618 Blatt 11.1-2014 Inspection of measuring and test equipment - Test instruction for mechanical dial gauges
VDI/VDE/DGQ 2618 Blatt 17.1-2014 Inspection of measuring and test equipment - Test instruction for horizontal length measuring machines

United States Navy, Mechanical strength testing equipment

NAVY MIL-S-901 D-1989 SHOCK TESTS, H.I. (HIGH-IMPACT) SHIPBOARD MACHINERY, EQUIPMENT, AND SYSTEMS, REQUIREMENTS FOR

CH-SNV, Mechanical strength testing equipment

SN EN ISO 3376:2020 Leather - Physical and mechanical tests - Determination of tensile strength and percentage elongation (ISO 3376:2020)

IEC - International Electrotechnical Commission, Mechanical strength testing equipment

IEC 62715-6-1:2018 Flexible display devices - Part 6-1: Mechanical test methods - Deformation tests (Edition 2.0)

ETSI - European Telecommunications Standards Institute, Mechanical strength testing equipment

TR 103 538-2019 Environmental Engineering (EE); Analysis of test method and test severity for mechanical test of equipment installed on poles/towers (V1.1.1)

Professional Standard - Machinery, Mechanical strength testing equipment

JB/T 12153-2015 Industrial machinery electrical equipment and system power frequency magnetic field immunity test method
JB/T 12155-2015 Test method for immunity to radio frequency electromagnetic field radiation of industrial machinery and electrical equipment and systems

CENELEC - European Committee for Electrotechnical Standardization, Mechanical strength testing equipment

EN 61587-1:1999 Mechanical Structures for Electronic Equipment Tests for IEC 60917 and IEC 60297 Part 1: Climatic@ Mechanical Tests and Safety Aspects for Cabinets@ Racks@ Subracks and Chassis
EN 61587-1:2007 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 1: Climatic@ mechanical tests and safety aspects for cabinets@ racks@ subracks and chassis

Professional Standard - Electricity, Mechanical strength testing equipment

DL/T 846.7-2004 General technical specifications for high voltage test equipments Part 7: dielectric strength detector of insulating oils
DL/T 846.7-2016 General Specifications for High Voltage Test Equipment Part 7: Dielectric Strength Tester for Insulating Oil

BE-NBN, Mechanical strength testing equipment

NBN S 21-022-1976 portable fire extinguishers - construction -Resistance to pressure - Mechanical tests
NBN E 29-802-1975