ZH
RU
ES
how to calculate error
how to calculate error, Total:51 items.
In the international standard classification, how to calculate error involves: Electricity. Magnetism. Electrical and magnetic measurements, Electromagnetic compatibility (EMC), Products of the textile industry, Solar energy engineering, Shipbuilding and marine structures in general, Quality, Linear and angular measurements, Equipment for the chemical industry, Petroleum, petroleum products and natural gas handling equipment, Metrology and measurement in general.
Professional Standard - Electricity, how to calculate error
- DL/T 731-2000 Error calculator used in electrical energy meter calibrating
Institute of Electrical and Electronics Engineers (IEEE), how to calculate error
- IEEE Std C63.6-1996 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements
- IEEE Std C63.6-1988 Guide for the computation of errors in open-area test site measurements
- ANSI Std C63.6-1996 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements
- IEEE/ANSI C63.6-1996 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements
- ANSI Std C63.6-1988 American National Standard Guide for electromagnetic compatibility--open-area test site measurements--guide for the computation of errors
- IEEE/ANSI C63.6-1988 American National Standard Guide for electromagnetic compatibility--open-area test site measurements--guide for the computation of errors
American National Standards Institute (ANSI), how to calculate error
- ANSI C63.6-1996 Guide for the Computation of Errors in Open-Area Test Site Measurements
- ASNI C63.6-1996 Guide for the Computation of Errors in
Open-Area Test Site Measurements
Association Francaise de Normalisation, how to calculate error
- NF X10-106:1983 Mesure de débit des fluides - Calcul de l'erreur limite sur une mesure de débit
- NF X06-047:1986 Application of statistical. Treatment of measured results. Errors estimation from interlaboratory comparaisons.
- NF EN ISO 10360-6:2002 Spécification géométrique des produits (GPS) - Essai de réception et de vérification périodique des machines à mesurer tridimensionnelles (MMT) - Partie 6 : estimation des erreurs dans le calcul des éléments associés Gaussiens
International Organization for Standardization (ISO), how to calculate error
- ISO 105-J03:1995/Cor 2:2006 Textiles - Tests for colour fastness - Part J03: Calculation of colour differences; Technical Corrigendum 2
- ISO 105-J03:1995/Cor 1:1996 Textiles - Tests for colour fastness - Part J03: Calculation of colour differences; Technical Corrigendum 1
- ISO 10360-6:2001/cor 1:2007 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features; Technical Corrigendum 1
- ISO 10360-6:2001 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features
International Electrotechnical Commission (IEC), how to calculate error
- IEC 60904-7:1995 Photovoltaic devices - Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic device
- IEC 60904-7:1998 Photovoltaic devices - Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic device
American Gear Manufacturers Association, how to calculate error
- AGMA 10FTM10-2010 Evaluation of Methods for Calculating Effects of Tip Relief on Transmission Error, Noise and Stress in Loaded Spur Gears
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., how to calculate error
- IEEE C63.6-1988 Standard for Electromagnetic Compatibility - Open - Area Test Site Measurements - Guide for the Computation of Errors
- IEEE C63.6-1996 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements
Professional Standard-Ships, how to calculate error
- CB*/Z 178-1980 Calculation and Inspection Method of Torque, Backlash and Transmission Error of Precision Gear Transmission Chain
Indonesia Standards, how to calculate error
CENELEC - European Committee for Electrotechnical Standardization, how to calculate error
- EN 60904-7:1998 Photovoltaic Devices Part 7: Computation of Spectral Mismatch Error Introduced in the Testing of a Photovoltaic Device
AGMA - American Gear Manufacturers Association, how to calculate error
- 10FTM10-2010 Evaluation of Methods for Calculating Effects of Tip Relief on Transmission Error@ Noise and Stress in Loaded Spur Gears
- 09FTM07-2009 Optimizing Gear Geometry for Minimum Transmission Error@ Mesh Friction Losses and Scuffing Risk Through Computer Aided Engineering
Japanese Industrial Standards Committee (JISC), how to calculate error
- JIS Z 9041-2 ERRATUM 1:2000 Statistical Interpretation of Data Part 2: Techniques of estimation and test relating to means and variancesStatistical Interpretation of Data Part 2: Techniques of estimation and test relating to means and variances (Erratum 1)
- JIS K 5600-4-6 ERRATUM 1:2002 Testing methods for paints -- Part 4: Visual characteristics of film -- Section 6: Colorimetry (Calculation of colour differences) (Erratum 1)
European Committee for Standardization (CEN), how to calculate error
- EN ISO 105-J03:1997 Textiles - Tests for Colour Fastness - Part J03: Calculation of Colour Differences ISO 105-J03: 1995, Including Technical Corrigendum 1: 1996
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, how to calculate error
- GB/T 6495.7-2006 Photovoltaic devices. Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic device
- GB/T 16857.6-2006 Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 6: Estimation of errors in computing Gaussian associated features
Taiwan Provincial Standard of the People's Republic of China, how to calculate error
- CNS 13059.7-2002 Photovoltaic devices Part 7:Computation of spectral mismatch error introduced in the testing of a photovoltaic device
- CNS 13059-7-2002 Photovoltaic devices Part 7:Computation of spectral mismatch error introduced in the testing of a photovoltaic device
Standard Association of Australia (SAA), how to calculate error
- AS/NZS CISPR 16.4.4:2004 Specification for radio disturbance and immunity measuring apparatus and methods - Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits
British Standards Institution (BSI), how to calculate error
- BS EN ISO 10360-6:2001 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Estimation of errors in computing Gaussian associated features
- BS EN ISO 10360-6:2002 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Estimation of errors in computing Gaussian associated features
RU-GOST R, how to calculate error
- GOST R 52857.11-2007 Vessels and apparatus. Norms and methods of strength calculation. Method of strength calculation of shells and heads according to weld misalignment, angular misalignment and shell nonroundness
- GOST R 8.882-2015 State system for ensuring the uniformity of measurements. The volume of natural gas. Method of error calculations in measurements of natural gas volume at reference conditions. Basic principles
Korean Agency for Technology and Standards (KATS), how to calculate error
- KS B ISO 10360-6:2014 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 6: Estimation of errors in computing Gaussian associated features
- KS B ISO 10360-6:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring achines(CMM)-Part 6:Estimation of errors in computing Gsussian associated features
- KS B ISO 10360-6:2019 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 6: Estimation of errors in computing Gaussian associated features
Danish Standards Foundation, how to calculate error
- DS/EN ISO 10360-6/Corr. 1:2007 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features
- DS/EN ISO 10360-6:2002 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features
KR-KS, how to calculate error
- KS B ISO 10360-6-2019 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 6: Estimation of errors in computing Gaussian associated features
未注明发布机构, how to calculate error
- BS EN ISO 10360-6:2001(2008) Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 6 : Estimation of errors in computing Gaussian associated features
ES-UNE, how to calculate error
- UNE-EN ISO 10360-6:2002/AC:2009 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)
Lithuanian Standards Office , how to calculate error
- LST EN ISO 10360-6:2002 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001)
- LST EN ISO 10360-6:2002/AC:2008 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)
AENOR, how to calculate error
- UNE-EN ISO 10360-6:2002 Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 6: Estimation of errors in computing Gaussian associated features. (ISO 10360-6:2001)
German Institute for Standardization, how to calculate error
- DIN EN ISO 10360-6:2009 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001+Cor. 1:2007); English version of DIN EN ISO 1
ZA-SANS, how to calculate error
- SANS 216-4-4:2008 Specification for radio disturbance and immunity measuring apparatus and methods Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio services