ZH
RU
ES

What method is generally used for ammonia detection

What method is generally used for ammonia detection, Total:95 items.

In the international standard classification, What method is generally used for ammonia detection involves: Adhesives, Paint ingredients, Alarm and warning systems, Electricity. Magnetism. Electrical and magnetic measurements, Conducting materials, Measurement of volume, mass, density, viscosity, Electrical equipment for working in special conditions, General methods of tests and analysis for food products, Bridge construction, Rotating machinery, Microbiology, Edible oils and fats. Oilseeds, Quality, Soil quality. Pedology, Air quality, Non-destructive testing, Metrology and measurement in general, Sensory analysis, Protection against fire, Electrical wires and cables, Electromechanical components for electronic and telecommunications equipment, Protection of and in buildings, Insulating materials, Water quality, Products of the textile industry.

RU-GOST R, What method is generally used for ammonia detection

GOST R 59327.2-2021 Automobile roads of general use. Polyurethane binder. Test methods
GOST R 52933-2008 Capacitance intrusion detectors for rooms. General technical requirements and test methods
GOST R 52136-2003 Electrical apparatus for the detection and measurement of flammable gases. Part 1. General requirements and test methods
GOST R 59181-2021 Automobile roads of general use. Bridge constructions. Non-destructive testing methods for detection of holidays in dielectric waterproofing coatings at bridge spans
GOST R 53214-2008 Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. General requirements and definitions
GOST R ISO/TR 8550-1-2007 Statistical methods. Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots. Part 1. General requirements
GOST R 8.604-2004 State system for ensuring the uniformity of measurements. Medical diagnostic ultrasonic equipment. Portable foetal heartbeat detectors. General requirements for the declaration of parameters and measurement methods

PL-PKN, What method is generally used for ammonia detection

PN F06001-06-1990 Domestic furniture General verification and test methods for furniture
PN-EN 15633-1-2020-03 P Foodstuffs - Detection of food allergens by immunological methods - Part 1: General considerations

Lithuanian Standards Office , What method is generally used for ammonia detection

LST EN ISO 11908:2002 Binders for paints and varnishes - Amino resins - General methods of test (ISO 11908:1996)
LST EN 15633-1-2009 Foodstuffs - Detection of food allergens by immunological methods - Part 1: General considerations
LST EN 15634-1-2009 Foodstuffs - Detection of food allergens by molecular biological methods - Part 1: General considerations
LST EN 45544-1-2001 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods

YU-JUS, What method is generally used for ammonia detection

JUS G.F1.040-1981 Rubber for medical and pharmaceutical uses. General requirements for quality and methods for testing
JUS G.F1.040/1-1993 Rubber for medical and pharmaceutical uses - General reqirements for quality and method for testing - Amendments
JUS N.R4.405-1977 Electromechanical components for electronic equipment.Test methods. Test 1a and 1b:General examination

European Committee for Standardization (CEN), What method is generally used for ammonia detection

EN 50054:1998 Electrical Apparatus for the Detection and Measurement of Combustible Gases - General Requirements and Test Methods
EN 50054:1991 Electrical apparatus for the detection and measurement of combustible gases; general requirements and test methods
EN 45544-1:1999 Workplace Atmospheres - Electrical Apparatus Used for the Direct Detection and Direct Concentration Measurement of Toxic Gases and Vapours - Part 1: General Requirements and Test Methods
EN 45544-1:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods

国家市场监督管理总局、中国国家标准化管理委员会, What method is generally used for ammonia detection

GB/T 38842-2020 Categories and test methods of practical superconducting wires—General characteristics and guidance

British Standards Institution (BSI), What method is generally used for ammonia detection

BS EN 50054:1991 Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods
BS EN 50054:1999 Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods
BS EN 61779-1:2000 Electrical apparatus for the detection and measurement of flammable gases - General requirements and test methods
BS 684-0.1:1996 Methods of analysis of fats and fatty oils - General introduction - General procedures and list of determinations in BS 684
BS EN 50545-1:2011+A1:2016 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
BS EN 50241-1:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - General requirements and test methods
BS EN 45544-1:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - General requirements and test methods
BS EN 45544-1:2015 Tracked Changes. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. General requirements and test methods

BE-NBN, What method is generally used for ammonia detection

NBN-EN 50054-1993 Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods
NBN C 32-501-1978

IT-UNI, What method is generally used for ammonia detection

UNI 7520-1976

Standard Association of Australia （SAA）, What method is generally used for ammonia detection

AS/NZS 61779.1:2000 Electrical apparatus for the detection and measurement of flammable gases Part 1: General requirements and test methods
AS/NZS 4641:2018 Electrical equipment for detection of oxygen and other gases and vapours at toxic levels — General requirements and test methods
AS/NZS 61779.1/AMD 1:2005 Amendment No.1 to AS/NZS 61779.1:2000 Electrical apparatus for the detection and measurement of flammable gases Part 1: General requirements and test methods

Danish Standards Foundation, What method is generally used for ammonia detection

DS/EN 15633-1:2009 Foodstuffs - Detection of food allergens by immunological methods - Part 1: General considerations
DS/EN 15634-1:2009 Foodstuffs - Detection of food allergens by molecular biological methods - Part 1: General considerations
DS/EN 45544-1:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods

AENOR, What method is generally used for ammonia detection

UNE-EN 15633-1:2009 Foodstuffs - Detection of food allergens by immunological methods - Part 1: General considerations
UNE-EN 15634-1:2009 Foodstuffs - Detection of food allergens by molecular biological methods - Part 1: General considerations

Association Francaise de Normalisation, What method is generally used for ammonia detection

NF V03-051-1*NF EN 15633-1:2019 Foodstuffs - Detection of food allergens by immunological methods - Part 1 : general considerations
NF V03-052-1*NF EN 15634-1:2019 Foodstuffs - Detection of food allergens by molecular biological methods - Part 1 : General considerations
NF C23-560-1/A11:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 1 : general requirements and test methods.
NF C23-560-1:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 1 : general requirements and test methods.
FD X31-611-2:1999 Qualité du sol - Méthodes de détection et de caractérisation des pollutions - Partie 2 : guide général pour l'utilisation de méthodes géophysiques en criblage de terrain
NF EN 17644:2022 Produits alimentaires - Détection des allergènes alimentaires par des méthodes de chromatographie en phase liquide couplée à la spectrométrie de masse (CL-SM) - Considérations générales
NF X31-611-2:1999 Soil quality - Pollution characterisation and detection methods - Part 2: General guide for use of use of land screening geophysical methods
NF EN 50545-1/A1:2016 Appareil électrique de détection et de mesure de gaz combustible et toxique dans les parcs de stationnement et les tunnels - Partie 1 : exigences de performance générales et méthodes pour la détection et la mesure du monoxyde de carbone et d'oxy...
NF C23-541-1/A1:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 1 : general requirements and test methods.
NF C23-541-1:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 1 : general requirements and test methods.
NF C23-504-1*NF EN 50545-1:2012 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1 : general performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides.
NF C32-074-22:2000 Common test methods for cables under fire conditions - Test on gas evolved during combustion of materials from cables - Part 2-2 : procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity.
NF EN ISO 6781-1:2023 Performance des bâtiments - Détection d\'irrégularités de chaleur, air et humidité dans les bâtiments par des méthodes infrarouges - Partie 1 : modes opératoires généraux
NF C32-024/A1:2001 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-1 : general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties.
NF C93-400-1-3*NF EN 60512-1-3:1998 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 1 : general examination. Section 3 : test 1c : electrical engagement length.
NF C93-400-1-4*NF EN 60512-1-4:1998 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 1 : general. Section 4 : test 1d : contact protection effectiveness (scoop-proof)

CEN - European Committee for Standardization, What method is generally used for ammonia detection

PREN 15633-1-2018 Foodstuffs - Detection of food allergens by immunological methods - Part 1: General considerations
PREN 15634-1-2018 Foodstuffs - Detection of food allergens by molecular biological methods - Part 1: General considerations

German Institute for Standardization, What method is generally used for ammonia detection

DIN EN 15633-1:2019 Foodstuffs - Detection of food allergens by immunological methods - Part 1: General considerations
DIN EN 15634-1:2019 Foodstuffs - Detection of food allergens by molecular biological methods - Part 1: General considerations
DIN EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid; German version EN 15856:2010
DIN EN 50545-1:2017 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
DIN EN 50545-1:2012 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides; German ver
DIN SPEC 38402-100:2017-08 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 100: Testing for threshold violation, taking into account the measurement uncertainty using statistical and empirical methods (A 100)
DIN EN 45544-1:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods; German version EN 45544-1:1999
DIN 38409-9:1980 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H), determination of the settleable matter by volume in water and waste water (H9)
DIN EN 14362-3:2012 Textiles - Methods for the determination of certain aromatic amines derived from azo colorants - Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene; German version EN 14362-3:2012
DIN 38409-10:1980 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H), determination of the settleable matter by mass concentration in water and waste water (H10)
DIN 38402-51:1986 German standard methods for the examination of water, waste water and sludge; general information (group A); calibration of analytical methods, evaluation of analytical results and linear calibration functions used to determine the performance characteris
DIN EN 45544-1:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods; German version EN 45544-1:2015

KR-KS, What method is generally used for ammonia detection

KS C IEC 61779-1-2003(2023)
KS P ISO TS 17822-1-2018 In vitro diagnostic test systems ─ Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens ─ Part 1: General requirements, terms and defi

Korean Agency for Technology and Standards (KATS), What method is generally used for ammonia detection

KS C IEC 61779-1-2003(2018)
KS Q ISO 13301-2009(2019) Sensory analysis－Methodology－General guidance for measuring odour, flavour and taste detection thresholds by a three-alternative forced-choice(3-AFC) procedure
KS C IEC 60512-1-3:2002 Electromechanical components for electronic equipment-Basic testing procedures and measuring methods-Part 1:General examination-Section 3:Test 1c-Electrical engagement length
KS C IEC 60512-1-3:2015 Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 1：General examination－Section 3：Test 1c－Electrical engagement length
KS C IEC 60512-1-3-2002(2013) Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 1：General examination－Section 3：Test 1c－Electrical engagement length
KS P ISO TS 17822-1:2018 In vitro diagnostic test systems ─ Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens ─ Part 1: General requirements, terms and defi

Professional Standard - Agriculture, What method is generally used for ammonia detection

水产品质量安全检验手册 9.1.5.0-2005 Chapter IX Fishing Feed Inspection Section 1 Basic Method for Fishing Feed Testing 5. Rapid Determination of Moisture, Crude Protein, Crude Fiber, Crude Fat, Lysine and Methionine in Fishing Feed--Near Infrared Spectroscopy (GBT 18868- 2002)

CENELEC - European Committee for Electrotechnical Standardization, What method is generally used for ammonia detection

EN 61779-1:2000 Electrical Apparatus for the Detection and Measurement of Flammable Gasesm Part 1: General Requirements and Test Methods
EN 50241-1:1999 Specification for Open Path Apparatus for the Detection of Combustible or Toxic Gases and Vapours@ Part 1: General Requirements and Test Methods

Professional Standard - Machinery, What method is generally used for ammonia detection

JB/T 10500.1-2005 Embedded thermometer resistance for electrical machines Part 1: General specification, measuring methods and examine rule

工业和信息化部, What method is generally used for ammonia detection

JB/T 10500.1-2019 Embedded thermal resistors for motors Part 1: General provisions, measurement methods and inspection rules

International Electrotechnical Commission (IEC), What method is generally used for ammonia detection

IEC 61779-1:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirements and test methods
IEC 60512-1-3:1997 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination - Section 3: Test 1c - Electrical engagement length

IN-BIS, What method is generally used for ammonia detection

IS 12448 Pt.2/Sec.1-1988

未注明发布机构, What method is generally used for ammonia detection

BS EN 50241-1:1999(2004) Specification for open path apparatus for the detection of combustible or toxic gases and vapours — Part 1 : General requirements and test methods

ES-UNE, What method is generally used for ammonia detection

UNE-EN 50545-1:2012/A1:2016 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
UNE-EN 45544-1:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods (Endorsed by AENOR in March of 2015.)

International Organization for Standardization (ISO), What method is generally used for ammonia detection

ISO 6781-1:2023 Performance of buildings — Detection of heat, air and moisture irregularities in buildings by infrared methods — Part 1: General procedures
ISO/FDIS 6781-1 Performance of buildings — Detection of heat, air and moisture irregularities in buildings by infrared methods — Part 1: General procedures

ZA-SANS, What method is generally used for ammonia detection

SANS 60811-1-1:2001 Common test methods for insulating and sheathing materials of electric cables and optical cables Part 1-1: Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties

European Committee for Electrotechnical Standardization（CENELEC）, What method is generally used for ammonia detection

EN 60512-1-4:1997 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 1: General - Section 4: Test 1d: Contact Protection Effectiveness (Scoop-Proof)
EN 60512-1-3:1997 Electromechanical Components for Electronic Equipment Basic Testing Procedures and Measuring Methods Part 1: General Examination Section 3: Test 1c - Electrical Engagement Length

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, What method is generally used for ammonia detection

GB/T 5095.2-1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests