ZH
RU
ES

Center Thickness Detection

Center Thickness Detection, Total:464 items.

In the international standard classification, Center Thickness Detection involves: Optical equipment, Medical sciences and health care facilities in general, Protection of and in buildings, Paper and board, Non-destructive testing, Road engineering, Cutting tools, Machine tools, Industrial automation systems, Leather technology, Linear and angular measurements, Quality, Construction materials, Pipeline components and pipelines, Machine tool systems, Radiation measurements, Water quality, Wastes, Products of the textile industry, Rubber and plastics products, Structures of buildings, Radiation protection, Non-textile floor coverings, Fuels, Geology. Meteorology. Hydrology, Farm buildings, structures and installations, Electrical wires and cables, Wood-based panels, Analytical chemistry, Testing of metals, Lamps and related equipment, Fibre optic communications, Iron and steel products, Electricity. Magnetism. Electrical and magnetic measurements, Services, Surface treatment and coating, Gears, General methods of tests and analysis for food products, Biology. Botany. Zoology, Paint ingredients, Insulating materials, Coals, Road vehicles in general, Vocabularies, Bearings, Medical equipment, Protection against fire, Mining and quarrying, Beverages, Food products in general, Optics and optical measurements, Organic chemicals, Petroleum products in general, Meat, meat products and other animal produce, Test conditions and procedures in general, Air quality, Applications of information technology, Petroleum, petroleum products and natural gas handling equipment, Insulating fluids, Telecommunication systems.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Center Thickness Detection

GB/T 1205-1975 Minimum thicknesses in rim and centre of lens
GB/T 11718.6-1989 Medium density fiberboard--Determination of thickness swelling rate of water absorption
GB/T 18400.6-2001 Test conditions for machining centres--Part 6: Accuracy of feeds, speeds and interpolations
GB/T 17598-1998 Geotextiles and geotextile-related products--Determination for thickness of single layers of multilayer products
GB/T 18400.7-2010/ISO 10791 7:1998 Machining Center Inspection Conditions Part 7: Precision Inspection of Finished Test Pieces
GB/T 18400.7-2010 Test conditions for machining centres.Part 7:Accuracy of a finished test piece
GB/T 20957.7-2007 Test conditions for precision machining centres.Part 7:Accuracy of a finished test piece
GB/T 25661.1-2010 Plano-machining centres with traveling overhead cross rail.Part 1:Testing of the accuracy
GB/T 18400.5-2001/ISO 107915:1998 Machining Center Inspection Conditions Part 5: Inspection of Positioning Accuracy and Repeated Positioning Accuracy of Workholding Pallets
GB/T 18400.5-2010 Test conditions for machining centres.Part 5:Accuracy and repeatability of positioning of work-holding pallets
GB/T 16462.1-2007 Test conditions for numerically controlled turning machines and turning centres- Part 1: Geometric test for machines with a horizontal workholding spindle
GB/T 18400.4-2010 Test conditions for machining centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes
GB/T 20957.5-2007 Test conditions of precision machining centres.Part 5:Tests for accuracy and repeatability of positioning of wrk-holding pallets
GB/T 19496-2004 Determinating of the compressive strength of spun high-strength concrete cores
GB/T 20957.4-2007 Test conditions for precision machining centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes
GB/T 32552-2016 Automatic Full Circumferential Ultrasonic Thickness Inspection of Seamless and Welded Steel Tubes (Except Submerged Arc Welded)
GB/Z 18620.3-2008 Cylindrical gears.Code of inspection practice.Part 3:Recommendations relative to gear blanks,shaft centre distance and parallelism of axes
GB/T 16462.4-2007 Test conditions for numerically controlled turning machines and turning centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes
GB/T 18400.1-2010/ISO 10791 1:1998 Machining Center Inspection Conditions Part 1: Geometric Accuracy Inspection of Horizontal and Machine Tools with Additional Spindle Head (Horizontal Z-axis)
GB/T 18400.1-2010 Test conditions for machining centres.Part 1:Geometric tests for machines with horizontal spindle and with accessory heads(horizontal Z-axis)
GB/Z 18620.3-2002 Cylindrical gears--Code of inspection practice--Part 3: Recommendations relative to gear blanks,shaft centre distance and parallelism of axes
GB/T 20957.1-2007 Test conditions for precision machining centres.Part 1:Geometric tests for machines with horizontal spindle and with accessory heads(horizontal Z axis)
GB/T 27411-2012 Routine methods for evaluation and expression of measurement uncertainty in testing laboratory
GB/T 18400.2-2010/ISO 107912:2001 Machining center inspection conditions Part 2: Vertical or with vertical main axis of rotation universal spindle head machine tool geometric accuracy test (vertical Z axis)
GB/T 18400.2-2010 Test conditions for machining centres.Part 2:Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axix(vertical Z-axis)

BR-ABNT, Center Thickness Detection

HU-MSZT, Center Thickness Detection

Group Standards of the People's Republic of China, Center Thickness Detection

T/SDHCST 004-2019 CTCs Testing and Consultation Center Regulations
T/SDHCST 003-2019 CTCs Test Preparation Center Laboratory Regulations
T/WLJC 61-2021 Horizontal turn-milling Compound Center
T/TZZL 3-2019 Text conditions for machining center Accuracy test of three axis machining precision specimen
T/JSJTQX 20-2021 Technicalspecificationforthicknessdetectionofsteelbarprotectivelayerbyelectromagneticinductionmethod
T/ZZXJX 050-2021 Technical specification for steel cover thickness and steel bar diameter detection
T/CSTM 00556.2-2022 Field test methods of flooring-Part 2: Thickness test
T/CCIAA 10-2021 Technical code for coke oven coke cake central temperature determination
T/CECS G:J41-01-2023 Specification for Rapid Detection of Highway Structural Layer Thickness Using 3D Ground Penetrating Radar
T/HNCAA 039-2022 Technical Standard for the Thickness Detection of Concrete Protective Layer of Precast Components of Highway Engineering
T/SATA 060-2023 Rapid Detection of Propiconazole in Choy Sum Colloidal Gold Immunochromatographic Assay
T/CEC 539-2021 Determination of Total Sulfur Content in Transformer Oil by Gas Chromatography-Flame Photometry

Standard Association of Australia （SAA）, Center Thickness Detection

AS/NZS 4347.7:1995 Damp-proof courses and flashings - Methods of test - Determination of thickness of bitumen coating and thickness or mass of metallic centre
AS 2452.3:2005 Non-destructive testing - Determination of thickness - Use of ultrasonic testing
AS 2452.1:2004 Non-destructive testing - Determination of thickness - Determination of wall thickness of pipe by the use of radiography
AS/NZS 2111.13:1996 Textile floor coverings - Tests and measurements - Determination of thickness loss after brief, moderate static loading

Society of Automotive Engineers (SAE), Center Thickness Detection

SAE ARP2654A-2023 Ultrasonic Thickness Testing
SAE AMS2632A-2008 Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness
SAE AMS2632C-2022 Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness

YU-JUS, Center Thickness Detection

JUS G.S2.022-1986 Leather. Physical testing. Measurement of thickness
JUS H.N8.202-1988 esting of corrugated fibreboard. Determination of thickness
JUS H.N8.203-1988 Testing ofpaperand-hoard. Determination of the thickness ofsingle sheets and method ofcalculation of the apparent density ofboard
JUS C.A7.061-1992 Non destructive testing - Ultrasonic testing of steel plate of thickness equal to or greater than 6 mm (reflection method)
JUS D.A8.084-1984 Testing of fibre building boards. Detsrmination of water absorption and of swelling in thickness after immersion in water
JUS G.E2.227-1982 Full thickness tensile strength and elongation of convey or belts. Specification and method of tests
JUS H.P8.508-1985 Testing of pesticides. Solubility in vvater
JUS F.S2.056-1977 Testing of textiles. Determination of hardness package yarns and intermediate products

Professional Standard - Machinery, Center Thickness Detection

JB/T 9922.2-1999 Center hole grinding machine precision inspection
JB/T 8648.1-1997 Precision Inspection of Drilling Machining Center
JB/T 8771.2-1998 Test conditions of machining centres.Part 2:Geometric tests for machines with vertical spindle
JB/T 9894.1-1999 Flat-face centre drilling lathes Accuracy inspection
JB/T 8772.2-1998 Test conditions of precision machining centres.Part 2:Geometric tests of vertical machining centres
JB/T 8648.1-2008 Drilling machining centres.Part 1: Testing of accuracy
JB/T 10793.1-2007 High precision machining centres- Part 1: Accuracy tests for machines with horizontal spindle
JB/T 10793.2-2007 High precision machining centers.Part 2: Accuracy tests for machines with vertical spindle
JB/T 8771.7-1998 Test conditions of machining centres.Part 7:Accuracy of finished test piece
JB/T 9894.1-2015 Milling face and drilling center hole machines.Part1: Testing of the accuracy
JB/T 10889.1-2008 Turning-milling machining centers with a horizontal workholding spindle.Part 1: Testing of the accuracy
JB/T 10792.1-2007 The 5-axes simultaneous vertical machining centers.Part 1: Testing of the accuracy
JB/T 11569.1-2013 The 5-axes simultaneous engraving machine centers.Part 1: Testing of the accuracy
JB/T 8772.7-1998 Test conditions of precision machining centres.Part 7:Accuracy of a finished test piece
JB/T 10231.27-2006 Tool inspection methods Part 27: Centre drills
JB/T 8490.1-1996 Precision inspection of CNC floor milling and boring machine and floor milling and boring machining center
JB/T 13085.1-2017 Precision numerically controlled horizontal turning machines and turning centres.Part 1: Testing of the accuracy
JB/T 8771.5-1998 Test conditions of machining centres.Part 5:Tests for accuracy and repeatability of positioning of work-holding pallets
JB/T 12407.2-2015 CNC vertical bearing-ring turning and grinding center.Part 2: Testing of the accuracy
JB/T 8771.4-1998 Test conditions of machining centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes
JB/T 8772.5-1998 Test conditions of precision machining centres.Part 5:Tests for accuracy and repeatability of positioning of work-holding pallets
JB/T 11776.1-2014 Heavy duty movable portal-type turning-milling machining centers.Part 1: Testing of the accuracy
JB/T 8772.4-1998 Test conditions of precision machining centres.Part 4:Accuracy and repeatability
JB/T 8771.1-1998 Test conditions of machining centres.Part 1:Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z axis)
JB/T 8772.1-1998 Test conditions of precision machining centres.Part 1:Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z axis)

German Institute for Standardization, Center Thickness Detection

DIN 53129:2001 Testing of solid fibre board - Water absorption and swelling - Water immersion
DIN 53118:1998 Testing of paper and board - Determination of equilibrium moisture content in bulk or in reel
DIN 53370:2006 Testing of plastics films - Determination of the thickness by mechanical scanning
DIN EN 14127:2011 Non-destructive testing - Ultrasonic thickness measurement; German version EN 14127:2011
DIN EN 14488-6:2006 Testing sprayed concrete - Part 6: Thickness of concrete on a substrate English version of DIN EN 14488-6:2006-09
DIN 53370:1976 Testing of plastic films; determination of the thickness by mechanical feeling
DIN EN 17290:2018 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique; German and English version prEN 17290:2018
DIN EN 17290:2021-12 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique; German version EN 17290:2021
DIN 58141-4:1990 Testing of fibre optic elements; determination of diameters and thicknesses of optical fibres
DIN 52351:1956 Testing of wood fibre boards; determination of the moisture content, the absorption of water and the thickness swell
DIN EN 15317:2014 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment; German version EN 15317:2013
DIN EN 13863-3:2005 Concrete pavements - Part 3: Test methods for the determination of the thickness of a concrete pavement from cores; German version EN 13863-3:2004
DIN 54316:1983 Testing of textiles; determination of thickness loss of textile floor coverings at static load
DIN EN 10160:1999-09 Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method); German version EN 10160:1999
DIN EN 17290:2021 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique; German version EN 17290:2021
DIN EN 61341:2012-08 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps (IEC/TR 61341:2010); German version EN 61341:2011 / Note: DIN IEC/TR 61341 (2011-01) remains valid alongside this standard until 2014-07-04.
DIN ISO 3415:2011-04 Textile floor coverings - Determination of thickness loss after brief, moderate static loading (ISO 3415:1986)
DIN EN ISO 10893-12:2020-10 Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011 + Amd 1:2020); German version EN ISO 10893-12:2011 + A1:2020
DIN 55978:1981 Testing of dyestuffs; determination of the relative tinting strength in solutions; spectrophotometric method
DIN 55978:2021 Testing of dyestuffs - Determination of the relative tinting strength in solutions - Spectrophotometric method
DIN ISO 3415:2011 Textile floor coverings - Determination of thickness loss after brief, moderate static loading (ISO 3415:1986)
PAS 1022-2004 Reference procedure for the determination of optical and dielectric material properties and the layer thickness of thin films by ellipsometry
DIN EN 10307:2002-03 Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method); German version EN 10307:2001
DIN 58141-9:1995 Testing of fibre optic elements - Part 9: Determination of deviation of the roundness and the concentricity of optical fibres
DIN IEC/TR 61341:2011 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps (IEC/TR 61341:2010)
DIN EN 12372:1999 Natural stone test methods - Determination of flexural strength under concentrated load; German version EN 12372:1999
DIN EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load; English version of DIN EN 12372:2007-02
DIN ISO 10791-1:2001 Machine tools - Test conditions for machining centres - Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis) ( ISO 10791-1:1999)
DIN 66111 Bb.1:1989 Particle size analysis; sedimention analysis; principles; evaluation equations for determination of quantities in the field of centrifugal force
DIN EN ISO 16866:2023-01 Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) (ISO 16866:2020); German version EN ISO 16866:2022
DIN ISO 10791-4:2001 Machine tools - Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes (ISO 10791-4:1998)

British Standards Institution (BSI), Center Thickness Detection

BS EN 14127:2011 Non-destructive testing. Ultrasonic thickness measurement
BS EN 13863-3:2005 Concrete pavements - Test methods for the determination of the thickness of a concrete pavement from cores
BS EN 13863-3:2004 Concrete pavements - Part 3: Test methods for the determination of the thickness of a concrete pavement from cores
BS EN 14127:2004 Non-destructive testing - Ultrasonic thickness measurement
BS 6286:1982 Methods of measurement of total or effective thickness of thin surface-hardened layers in steel
BS ISO 9697:2015 Water quality. Gross beta activity in non-saline water. Test method using thick source
BS EN 17290:2021 Non-destructive testing. Ultrasonic testing. Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
BS ISO 9696:2007 Water quality - Measurement of gross alpha activity in non-saline water - Thick source method
BS ISO 9697:2008 Water quality - Measurement of gross beta activity in non-saline water - Thick source method
18/30376856 DC BS EN 17290. Non-destructive testing. Ultrasonic testing. Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
BS EN 317:1993 Particleboards and fibreboards - Determination of swelling in thickness after immersion in water
BS EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
BS EN 61341:2011 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
BS ISO 10791-3:1999 Test conditions for machining centres - Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis)
BS EN 10307:2002 Non-destructive testing - Ultrasonic testing of austenitic and austentitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
BS EN 10307:2001(2002) Non-destructive testing - Ultrasonic testing of austenitic and austentitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
BS EN 61341:2010 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
BS EN 10246-13:2000 Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes
BS EN 10246-15:2000 Non-destructive testing of steel tubes - Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections
BS EN 60811-202:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General tests. Measurement of thickness of non-metallic sheath
BS ISO 17577:2016 Tracked Changes. Steel. Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm
BS ISO 13674-1:2010 Road vehicles - Test method for the quantification of on-centre handling - Weave test
BS ISO 4386-1:2012 Plain bearings. Metallic multilayer plain bearings. Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm
BS EN ISO 10893-12:2011 Non-destructive testing of steel tubes. Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
17/30360078 DC BS EN 12504-1. Testing concrete in structures. Part 1. Cored specimens. Taking, examining and testing in compression
18/30361451 DC BS ISO 10791-7. Test conditions for machining centres. Part 7. Accuracy of finished test piece
BS EN 16866:2017 Metallic and other inorganic coatings. Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)
BS EN ISO 16866:2022 Metallic and other inorganic coatings. Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)
BS EN ISO 2128:2010 Anodizing of aluminium and its alloys. Determination of thickness of anodic oxidation coatings. Non-destructive measurement by split-beam microscope
BS ISO 4386-2:2012 Plain bearings. Metallic multilayer plain bearings. Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
BS 6068 Sec.3.1:1993 Water quality. Radiological methods. Measurement of gross alpha activity in non-saline water:thick source method
BS EN ISO 14253-2:2011 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
16/30327831 DC BS ISO 10791-7 AMD1. Test conditions for machining centres. Part 7. Accuracy of finished test pieces

CEN - European Committee for Standardization, Center Thickness Detection

EN ISO 16809:2019 Non-destructive testing - Ultrasonic thickness measurement
EN 14127:2004 Non-destructive testing - Ultrasonic thickness measurement
PREN 17290-2018 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment

International Organization for Standardization (ISO), Center Thickness Detection

ISO 16809:2012 Non-destructive testing - Ultrasonic thickness measurement
ISO 16809:2017 Non-destructive testing - Ultrasonic thickness measurement
ISO 16831:2012 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
ISO 10791-6:2014 Test conditions for machining centres - Part 6: Accuracy of speeds and interpolations
ISO 10791-6:1998 Test conditions of machining centres - Part 6: Accuracy of feeds, speeds and interpolations
ISO 3415:1975 Textile floor coverings — Determination of thickness after brief, moderate static loading
ISO 10791-7:2014 Test conditions for machining centres - Part 7: Accuracy of finished test pieces
ISO 9863-2:1996 Geotextiles and geotextile-related products - Determination of thickness at specified pressures - Part 2: Procedure for determination of thickness of single layers of multilayer products
ISO 9696:2007 Water quality - Measurement of gross alpha activity in non-saline water - Thick source method
ISO 5637:1978 Paper and board — Determination of water absorption and increase in thickness after immersion in water
ISO 10791-6:1998/Cor 1:2004 Test conditions for machining centres - Part 6: Accuracy of feeds, speeds and interpolations; Technical Corrigendum 1
ISO 10543:1993 Seamless and hot-stretch-reduced welded steel tubes for pressure purposes; full peripheral ultrasonic thickness testing
ISO 3415:1986 Textile floor coverings; Determination of thickness loss after brief, moderate static loading
ISO 10791-5:1998 Test conditions for machining centres - Part 5: Accuracy and repeatability of positioning of work-holding pallets
ISO 10791-3:1998 Test conditions of machining centres - Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis)
ISO 10791-1:2015 Test conditions for machining centres - Part 1: Geometric tests for machines with horizontal spindle (horizontal Z-axis)
ISO 10791-1:1998 Test conditions for machining centres - Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis)
ISO 10791-4:1998 Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes
ISO 10791-3:1998/cor 1:1999 Test conditions of machining centres - Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis); Technical Corrigendum 1
ISO 769:1972 Fibre building boards; Hard and medium boards; Determination of water absorption and of swelling in thickness after immersion in water
ISO 13674-1:2010 Road vehicles - Test method for the quantification of on-centre handling - Part 1: Weave test
ISO 4386-1:2012 Plain bearings - Metallic multilayer plain bearings - Part 1: Non-destructive ultrasonic testing of bond of thickness 0,5 mm
ISO/TR 23358:2022 Health informatics — A case study on establishing standardized measurement data in cardiac examination reports
ISO 16866:2020 Metallic and other inorganic coatings — Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)

ES-UNE, Center Thickness Detection

UNE-EN ISO 16809:2020 Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017)
UNE-EN 17290:2022 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
UNE-EN 16866:2018 Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)

Taiwan Provincial Standard of the People's Republic of China, Center Thickness Detection

CNS 13494-1995 Test Code for Accuracy of Machining Centers (Vertical Type)
CNS 9785-1992 Test code for accuracy of machining centers
CNS 1241-2005 Method of test for measuring thickness of concrete elements using drilled concrete cores
CNS 15077-7-2007 Test conditions for machining centers - Part 7 : Accuracy of finished test piece
CNS 15077-6-2007 Test conditions for machining centers - Part 6 : Accuracy of feeds, speeds and interpolations
CNS 15077-5-2007 Test conditions for machining centers - Part 5 : Accuracy and repeatability of positioning of work-holding pallets
CNS 15077-4-2007 Test conditions for machining centers - Part 4 : Accuracy and repeatability of positioning of linear and rotary axes
CNS 15077-3-2008 Test conditions for machining centres - Part 3 : Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis)

European Committee for Standardization (CEN), Center Thickness Detection

EN 14127:2011 Non-destructive testing - Ultrasonic thickness measurement
EN 13863-3:2004 Concrete pavements - Part 3: Test methods for the determination of the thickness of a concrete pavement from cores
EN 14488-6:2006 Testing sprayed concrete - Part 6: Thickness of concrete on a substrate
EN 17290:2021 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
EN 317:1993 Particleboards and fibreboards; determination of swelling in thickness after immersion in water
EN 15317:2013 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
EN 10246-15:2000 Non-Destructive Testing of Steel Tubes - Part 15: Automatic Ultrasonic Testing of Strip/Plate Used in the Manufacture of Welded Steel Tubes for the Detection of Laminar Imperfections
EN 16866:2017 Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)
EN ISO 16866:2022 Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) (ISO 16866:2020)
EN 10307:2001 Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)

RU-GOST R, Center Thickness Detection

GOST R ISO 16809-2015 Non-destructive testing. Ultrasonic testing. Thickness measurement
GOST 28702-1990 Non-destructive testing. Ultrasonic thickness gauges. General technical requirements
GOST 22238-1976 Nondestractiv testing. Mesure-reference for thickness gauges of coverings. General principles
GOST R 55042-2012 Non-destructive testing. Evaluation of metallic coating thickness by ultrasound. General requirements
GOST R 56475-2015 Space systems. Non-destructive testing of the thickness of thick nickel platings of parts and assemblies of liquid-propellant engines. General requirements
GOST R 56473-2015 Space systems. Non-destructive testing of thickness of galvanic nickel and two-layer nickel-chrome coatings. General requirements
GOST ISO 13041-5-2016 The lathes with numerical control and CNC machining centers. Test conditions. Part 5. Accuracy speeds and interpolations
GOST R IEC 61559-1-2012 Radiation protection instrumentation in nuclear facilities. Centralized systems for continuous monitoring of radiation. Part 1. General requirements
GOST R 55806-2013 Non-destructive testing. Ultrasound measurement of bonding strength of layers in bimetal. General requirements

SE-SIS, Center Thickness Detection

SIS SS 11 42 03-1988 Non-destructive testing - Ultrasonic testing of sheet (strip) and plate with thickness ≥5mm
SIS SS IEC 577:1981 Nuclear instrumentation - lonizing radiation thickness meters
SIS SS IEC 769:1988 Nuclear instrumentation — lonizing radiation measurement systems with analogue or digital signalprocessing for thickness measurements

National Metrological Verification Regulations of the People's Republic of China, Center Thickness Detection

JJG(铁道) 137-1992 Verification rules for the height measuring ruler of coupler center of locomotive and rolling stock
JJG(轻工) 50-1990 Verification Regulations for Paper and Board Thickness Meter
JJG 818-2018 Verification regulations for magnetic and eddy current coating thickness measuring instruments
JJG(石油) 45-1997 Verification rules for rock core oil-water saturation tester
JJG 1150-2018 Rules for Measuring Center Height of Coupler for Railway Locomotive and Vehicle
JJG(铁道) 150-1994 Verification Regulation of Optical Instrument for the Height and off Center Deviation of Contact Wire

DE-VDA, Center Thickness Detection

VDA 230-204-2005

国家市场监督管理总局、中国国家标准化管理委员会, Center Thickness Detection

GB/T 39953-2021 5-axis simultaneous machining center—Testing of the accuracy for RTCP
GB/T 37122-2018 Non-destructive testing—Phantom of maximum detectable steel thickness for industrial computed tomography(CT)
GB/T 37158-2018 Non-destructive testing—Test method for measuring the maximum detectable steel thickness by industrial computed tomography(CT)
GB/T 39967-2021 5-axis simultaneous machining center—Accuracy of S-shaped test piece

Association Francaise de Normalisation, Center Thickness Detection

NF P98-863-3*NF EN 13863-3:2005 Concrete pavements - Part 3 : test methods for the determination of the thickness of a concrete pavement from cores
NF T47-206:1982 Rubber or plastics based hoses. Measurements of external diameters wall thicknesses and concentricity.
NF EN 15317:2013 Essais non destructifs - Contrôle ultrasonore - Caractérisation et vérification des appareils de mesure de l'épaisseur par ultrasons
NF M60-815:2008 Water quality - Measurement of gross alpha activity in non-saline water - Thick source method.
NF M60-816:2008 Water quality - Measurement of gross beta activity in non-saline water - Thick source method.
NF A09-313*NF EN 17290:2021 Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
NF EN 17290:2021 Essais non destructifs - Contrôle par ultrasons - Examen de la perte d'épaisseur due à l'érosion et/ou à la corrosion par la technique TOFD
NF E60-125:1991 Acceptance conditions for external cylindral centreless grinding machines. Testing of the accuracy.
NF A09-324:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment.
NF ISO 10791-6:2015 Conditions d'essai pour centres d'usinage - Partie 6 : précision des vitesses et interpolations
NF EN ISO 10893-9:2011 Essais non destructifs des tubes en acier - Partie 9 : contrôle automatisé par ultrasons pour la détection des dédoublures dans les bandes/tôles fortes utilisées pour la fabrication des tubes en acier soudés
NF G35-018*NF ISO 3415:1987 Textile floor coverings. Determination of thickness loss after brief, moderate static loading.
NF G35-019*NF ISO 3416:1987 Textile floor coverings. Determination of thickness loss after prolonged, heavy static loading.
NF ISO 3415:1987 Revêtements de sol textiles - Détermination de la perte d'épaisseur après application, d'une charge statique modérée.
NF G52-014:1976 DETERMINATION OF RESISTANCE OF LEATHER TO TEARING (ON SPECIMEN HAVING A SLIT IN THE CENTRE).
NF C72-341*NF EN 61341:2012 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
NF E60-172-7*NF ISO 10791-7:2020 Test conditions for machining centres - Part 7 : accuracy of finished test pieces
NF E60-160-5*NF ISO 13041-5:2015 Test conditions for numerically controlled turning machines and turning centres - Part 5 : accuracy of speeds and interpolations
NF A49-785-12*NF EN ISO 10893-12:2011 Non destructive testing of steel tubes - Part 12 : automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes.
NF A91-055*NF EN 16866:2017 Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)

CZ-CSN, Center Thickness Detection

CSN 66 8102 Cast.26-1997
CSN 05 1172-1976 Ultrasonic testing. Ultrasonic manual testing oE fusion welds of steel classes 11 — 17 of thickness from 10 up to 50 mm
CSN 80 0311-1975 Deteclion of ripeness of cotton fibres in polarized liglit
CSN 20 0300 Cast.24-1986 Measurements of geometrical accuracy of machine tools. Measuring methods for axial run-out of test part surfaces
CSN 80 4406-1984 Textile floor coverings. Determination of thickness loss after brief, moderate static loading

Xinjiang Provincial Standard of the People's Republic of China, Center Thickness Detection

DB65/T 4016-2017 Acceptance specifications for autonomous region-level inspection and testing centers
DB65/T 4017-2017 Regulations for the preparatory establishment of autonomous region-level inspection and testing centers

Shaanxi Provincial Standard of the People's Republic of China, Center Thickness Detection

DB61/T 974-2015 Method of Pavement Radar Detecting Pavement Surface Thickness

Association of German Mechanical Engineers, Center Thickness Detection

Korean Agency for Technology and Standards (KATS), Center Thickness Detection

KS B 4404-2003 TEST CODE FOR PERFORMANCE AND ACCURACY OF MACHINING CENTERS
KS B 4404-2008 TEST CODE FOR PERFORMANCE AND ACCURACY OF MACHINING CENTERS
KS I ISO 9696:2007 Water quality－Measurement of gross alpha activity in non-saline water－Thick source method
KS B 4421-2013 Test code for performance and accuracy of machining centersX axis column traveling type
KS D ISO 17577-2007(2017) Steel－Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm
KS D ISO 17577-2007(2022) Steel－Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm
KS K ISO 3415-2008(2018) Textile floor coverings－Determination of thickness loss after brief, moderate static loading
KS K ISO 3415:2021 Textile floor coverings — Determination of thickness loss after brief, moderate static loading
KS B ISO 13041-5:2014 Test conditions for numerically controlled turning machines and turning centres — Part 5: Accuracy of feeds, speeds and interpolations
KS B ISO 13041-5:2012 Test conditions for numerically controlled turning machines and turning centres-Part 5:Accuracy of feeds, speeds and interpolations
KS B ISO 13041-1:2014 Test conditions for numerically controlled turning machines and turning centres — Part 1: Geometric tests for machines with a horizontal workholding spindle
KS B ISO 13041-1:2010 Test conditions for numerically controlled turning machines and turning centres-Part 1:eometric tests for machines with a horizontal workholding spindle
KS B ISO 13041-1:2016 Test conditions for numerically controlled turning machines and turning centres — Part 1: Geometric tests for machines with a horizontal workholding spindle
KS C IEC 61341-2014(2019) Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
KS B ISO 10791-6:2014 Test conditions for machining centres-Part 6:Accuracy of feeds, speeds and interpolations
KS B ISO 10791-6:2012 Test conditions for machining centres-Part 6:Accuracy of feeds, speeds and interpolations
KS D ISO 10543:2002 Seamless and hot-stretch-reduced welded steel tubes for pressure purposes－Full peripheral ultrasonic thickness testing
KS K ISO 3415:2008 Textile floor coverings－Determination of thickness loss after brief, moderate static loading
KS B ISO 13041-6:2014 Test conditions for numerically controlled turning machines and turning centres — Part 6: Accuracy of a finished test piece
KS B ISO 13041-6:2012 Test conditions for numerically controlled turning machines and turning centres-Part 6:Accuracy of a finished test piece
KS B 4421-2002 Test code for performance and accuracy of machining centersX axis column traveling type
KS D ISO 2128-2011(2016) Anodizing of aluminium and its alloys－Determination of thickness of anodic oxidation coatings－Non-destructive measurement by split-beam microscope
KS D ISO 2128-2011(2021) Anodizing of aluminium and its alloys－Determination of thickness of anodic oxidation coatings－Non-destructive measurement by split-beam microscope
KS B ISO 13041-4:2010 Test conditions for numerically controlled turning machines and turning centres-Part 4:Accuracy and repeatability of positioning of linear and rotary axes
KS B ISO 13041-4:2014 Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS C IEC 61341:2003 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
KS C IEC 61341:2014 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
KS B ISO 13041-2:2014 Test conditions for numerically controlled turning machines and turning centres — Part 2: Geometric tests for machines with a vertical workholding spindle
KS B ISO 13041-2:2012 Test conditions for numerically controlled turning machines and turning centres-Part 2:Geometric tests for machines with a vertical workholding spindles
KS B ISO 13041-6:2018 Test conditions for numerically controlled turning machines and turning centres — Part 6: Accuracy of a finished test piece
KS D ISO 2128:2011 Anodizing of aluminium and its alloys－Determination of thickness of anodic oxidation coatings－Non-destructive measurement by split-beam microscope
KS R ISO 13674-1:2005 Road vehicles-Test method for the quantification of on-centre handling-Part 1:Weave test
KS R ISO 13674-1:2015 Road vehicles-Test method for the quantification of on-centre handling-Part 1:Weave test
KS F 2407-1968(1995) TESTING METHOD FOR FLEXURAL STRENGTH OF CONCRETE (USING SIMPLE BEAM WITH CENTER-POINT LOADING)
KS B ISO 10791-3:2012 Test conditions for machining centres-Part 3:Geometric tests for machines with integral indexable or continuous universal heads(vertical Z-axis)
KS B ISO 10791-3:2014 Test conditions for machining centres — Part 3: Geometric tests for machines with integral indexable or continuous universal heads(vertical Z-axis)
KS E 7002-2005 Methods for determination of carbon monoxide andtemperature from combustion gases generated fromcombustion apparatus for holed coal briquette
KS E 7002-1973 Methods for determination of carbon monoxide andtemperature from combustion gases generated fromcombustion apparatus for holed coal briquette

FI-SFS, Center Thickness Detection

AT-ON, Center Thickness Detection

ONORM M 3037-1994 Non-destructive testing - Measurement of coating thickness by electromagnetic methods -
ONORM EN 317-1993 Particleboards and fibreboards - Determination of swelling in thickness after immersion in water

工业和信息化部, Center Thickness Detection

JB/T 13582.1-2019 High Speed Horizontal Machining Center Part 1: Accuracy Inspection
JB/T 13581.1-2019 High Speed Vertical Machining Center Part 1: Accuracy Inspection
JB/T 13591.1-2019 Double-column symmetrical horizontal machining center Part 1: Accuracy inspection
JB/T 13591.1-2020 Double-column symmetrical horizontal machining center Part 1: Accuracy inspection
YD/T 2585-2016 Internet data center security protection testing requirements
JB/T 13589.2-2019 Gantry Machining Center Part 2: Accuracy Inspection of Gantry Mobile Machine Tools
JB/T 13589.1-2019 Gantry machining center Part 1: Accuracy inspection of gantry fixed machine tools
JB/T 13587.1-2019 High-speed five-axis linkage fixed-beam gantry machining center Part 1: Accuracy inspection
JB/T 13588.1-2019 Precision five-axis linkage overhead beam moving gantry machining center Part 1: Accuracy inspection

Professional Standard - Aerospace, Center Thickness Detection

QJ 990.3A-2011 Inspection methods of coating.Part 3:Measurement of coating thickness

GOSTR, Center Thickness Detection

GOST R 57093-2016 Requirements for testing laboratories (centers) of railway products
GOST ISO 10791-6-2017 Machining centres. Test conditions. Part 6. Accuracy of speeds and interpolations

Professional Standard - Nuclear Industry, Center Thickness Detection

EJ/T 1075-1998 Determination of gross alpha activity in water thick source method

National Electrical Manufacturers Association（NEMA), Center Thickness Detection

NEMA MS 5-2003 Determination of Slice Thickness in Diagnostic Magnetic Resonance Imaging

NEMA - National Electrical Manufacturers Association, Center Thickness Detection

NEMA MS 5-2010 Determination of Slice Thickness in Diagnostic Magnetic Resonance Imaging
NEMA MS 5-1991 Determination of Slice Thickness in Diagnostic Magnetic Resonance Imaging
NEMA MS 5-2018 Determination of Slice Thickness in Diagnostic Magnetic Resonance Imaging

AGMA - American Gear Manufacturers Association, Center Thickness Detection

915-3-A99-1999 Inspection Practices - Gear Blanks@ Shaft Center Distance and Parallelism

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Center Thickness Detection

GJB/J 5463-2005 Verification regulation for measurement equipment of optical film refractive index and thickness
GJB 5969.1-2007 Test methods for microsphere uranium dioxide with coated niobium for submarine nuclear power plant.Part 1: Measurement of coated niobium layer thickness by metallography

Military Standard of the People's Republic of China-General Armament Department, Center Thickness Detection

GJB 8687-2015 Calibration procedures for optical film refractive index and thickness testers
GJB 5131-2002 The allowable concentration of Okotokin in the air in the workplace and its detection method

Professional Standard - Agriculture, Center Thickness Detection

NY/T 252-1995 Determination of thickness loss of sisal fabrics after short-term moderate static loading
NY/T 2243-2012 Construction standard of supervision of supervision and testing center for quality and safety of agri-products at provincial level
NY/T 2242-2012 Construction standard of supervision and testing center for quality and safety of agri-products of ministry of agriculture
830兽药典二部-2015 Appendix Contents 2000 Traditional Chinese Medicine Testing Method 2303 Rancidity Determination Method
823兽药典二部-2015 Appendix Table of Contents 2000 Traditional Chinese Medicine Testing Method 2101 Dilatation Determination Method

American Society for Testing and Materials (ASTM), Center Thickness Detection

ASTM C174/C174M-06 Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
ASTM E376-03 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Examination Methods
ASTM E376-06 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Examination Methods
ASTM B487-20 Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
ASTM B764-04(2009) Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
ASTM E1647-98a Standard Practice for Determining Contrast Sensitivity in Radioscopy
ASTM D5546-94a Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
ASTM D5546-01 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
ASTM D5546-09 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
ASTM UOP262-99 Phenols and Thiophenols in Petroleum Products by Spectrophotometry
ASTM B487-85(1997) Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section
ASTM C293-94 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM C293-02 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM E840-95 Standard Practice for Using Flame Photometric Detectors in Gas Chromatography
ASTM E840-95(2000) Standard Practice for Using Flame Photometric Detectors in Gas Chromatography
ASTM UOP702-90 Impurities in Distilled High Purity Cumene by GC
ASTM E840-95(2021)e1 Standard Practice for Using Flame Photometric Detectors in Gas Chromatography
ASTM E1647-09 Standard Practice for Determining Contrast Sensitivity in Radioscopy
ASTM B764-04 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
ASTM B764-04(2021) Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
ASTM E2439-09 Standard Guide for Instrumentation, Sensors and Operating Software Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
ASTM E1647-03 Standard Practice for Determining Contrast Sensitivity in Radioscopy

Anhui Provincial Standard of the People's Republic of China, Center Thickness Detection

DB34/T 3148-2018 Accuracy Inspection of Thermal Deformation Finishing Specimen of CNC Machining Center
DB34/T 234-2022 Technical specification for testing the compressive strength of bricks in masonry by rebound method

Beijing Provincial Standard of the People's Republic of China, Center Thickness Detection

DB11/T 365-2016 Technical specification for steel cover thickness and steel bar diameter detection
DB11/T 365-2006 Technical specification for inspection of the depth of coverage and the diameter of reinforcing bars in concrete by electromagnetic method

Professional Standard - Railway, Center Thickness Detection

TB/T 2456.9-1993 Measuring scale for center height of rolling stock couplers
TB/T 2606-1996 Zhuan 8A side frame spring bearing platform facing the vertical center line of the side frame verticality measurement and inspection tool
TB/T 3015.5-2001 Technical conditions of measuring tools for overall wheel dimensions of railway vehicles Rim thickness difference calipers

Professional Standard - Post and Telecommunication, Center Thickness Detection

YD/T 2585-2013 Internet data center security protection testing requirements

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Center Thickness Detection

GB/T 34880.1-2017 Test conditions for the 5-axis simultaneous machining centers—Part 1: Testing of the accuracy for horizontal machine
GB/T 34880.2-2017 Test conditions for the 5-axis simultaneous machining centers—Part 2: Testing of the accuracy for vertical machine
GB/T 16462.5-2017 Test conditions for numerically controlled turning machines and turning centers—Part 5: Accuracy of feeds, speeds and interpolations
GB/T 16462.6-2017 Test conditions for numerically controlled turning machines and turning centers—Part 6: Accuracy of a finished test piece
GB/T 16462.2-2017 Test conditions for numerically controlled turning machines and turning centers—Part 2: Geometric tests for machines with a vertical workholding spindle
GB/T 16462.3-2017 Test conditions for numerically controlled turning machines and turning centres—Part 3: Geometric tests for machines with inverted vertical work-holding spindles
GB/T 34796-2017 Quantification and purity analysis of nucleic acid concentration in solution—Ultraviolet spectrophotometry

VN-TCVN, Center Thickness Detection

TCVN 6053-2011 Water quality.Measurement of gross alpha activity in non-saline water.Thick source method
TCVN 6219-2011 Water quality.Measurement of gross beta activity in non-saline water.Thick source method

Guizhou Provincial Standard of the People's Republic of China, Center Thickness Detection

DB52/T 1734-2023 Data center lightning protection device detection technical specification

Jiangxi Provincial Standard of the People's Republic of China, Center Thickness Detection

DB36/T 933-2023 Technical Specifications for Detection of Lightning Protection Devices in Data Centers

未注明发布机构, Center Thickness Detection

DIN EN 12504-1:2019 Testing of concrete in structures – Part 1: Core samples – Production, examination and testing of compressive strength
BS EN 317:1993(1999) Particleboards and fibreboards — Determination of swelling in thickness after immersion in water
GJB 8793.1-2015 Testing method for niobium-coated uranium dioxide microspheres used in submarine nuclear power plants - Part 1: Determination of niobium-coated layer thickness metallographic method
BS ISO 16866:2020 Metallicand otherinorganic coatings — Simultaneous thickness and electrode potential determination ofindividual layers in multilayernickel deposits (STEP test)

Liaoning Provincial Standard of the People's Republic of China, Center Thickness Detection

DB21/T 2012-2012 Geometric accuracy inspection of five-axis overhead beam moving gantry machining center

Institute of Electrical and Electronics Engineers (IEEE), Center Thickness Detection

IEEE 1617-2007 Guide for Detection, Mitigation, and Control of Concentric Neutral Corrosion in Medium-Voltage Underground Cables
IEEE Std 1617-2007 IEEE Guide for Detection, Mitigation, and Control of Concentric Neutral Corrosion in Medium-Voltage Underground Cables
IEEE Unapproved Draft Std P1617/D7.0, Jun 2007 IEEE Draft Guide for Detection, Mitigation and Control of Concentric Neutral Corrosion in Medium Voltage Underground Cables
IEEE Approved Draft Std P1617/D7.0, Jun 07 Approved IEEE Draft Guide for Detection, Mitigation, and Control of Concentric Neutral Corrosion in Medium Voltage Underground Cables
IEEE Unapproved Draft Std P1617/D6.0, Apr 2007 Unapproved IEEE Draft Guide for Detection, Mitigation, and Control of Concentric Neutral Corrosion in Medium Voltage Underground Cables

Danish Standards Foundation, Center Thickness Detection

DS/EN 317:1994 Particleboards and fibreboards - Determination of swelling in thickness after immersion in water
DS/EN 10160:2000 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
DS/EN 61341:2011 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
DS/EN ISO 10893-12:2011 Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
DS/EN 10307:2002 Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
DS/EN 17290:2021 Non-destructive testing – Ultrasonic testing – Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
DS/EN 12504-4:2021 Testing concrete in structures – Part 4: Determination of ultrasonic pulse velocity

Lithuanian Standards Office , Center Thickness Detection

LST EN 317-1999 Particleboards and fibreboards - Determination of swelling in thickness after immersion in water
LST EN 10160-2001 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
LST EN 10307-2002 Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
LST EN ISO 10893-12:2011 Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011)
LST EN 61341-2012 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps (IEC/TR 61341:2010)

KR-KS, Center Thickness Detection

KS K ISO 3415-2021 Textile floor coverings — Determination of thickness loss after brief, moderate static loading
KS B ISO 13041-6-2018 Test conditions for numerically controlled turning machines and turning centres — Part 6: Accuracy of a finished test piece
KS B ISO 10791-6-2016 Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations

AENOR, Center Thickness Detection

UNE-EN 317:1994 PARTICLEBOARDS AND FIBREBOARDS. DETERMINATION OF SWELLING IN THICKNESS AFTER INMERSION IN WATER.
UNE-EN 61341:2012 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
UNE-EN 10160:2000 ULTRASONIC TESTING OF STEEL FLAT PRODUCT OF THICKNESS EQUAL OR GREATER THAN 6 MM (REFLECTION METHOD).
UNE 7295:1976 DETERMINATION OF CONTENT, MAXIMUM SIZE AND THICK AGGREGATE GRANULOMETRIC MODULUS IN FRESH CONCRETE.
UNE 15450-6:2000 Machine-tools. Test conditions of machining centres. Part 6: Accuracy of feeds, speeds and interpolations.
UNE-EN ISO 10893-12:2011 Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011)
UNE 40291:1975 TEXTILE COATINGS OF FLOORS. DETERMINATION OF THICKNESS LOOSES AFTER APPLICATION OF A STATIC LOAD MODERATE OF SHOR DURATION. (TEST OF CHAIR LEG).
UNE-EN 10307:2002 Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method).
UNE 55812:1992 ETHANOL TO BE USED AS RAW-MATERIAL IN DETERGENT FORMULATIONS. DETECTION OF ALKALINITY OR DETERMINATION OF ACIDITY TO PHENOLPHTALEIN
UNE 15450-7:2000 Machine-tools. Test conditions for machining centres. Part 7: Accuracy of a finished test piece.

Japanese Industrial Standards Committee (JISC), Center Thickness Detection

JIS K 0555:1995 Testing methods for determination of silica in highly purified water
JIS K 0554:1995 Testing methods for concentration of fine particles in highly purified water
JIS K 0556:1995 Testing methods for determination of anions in highly purified water
JIS K 0550:1994 Testing methods for detection and estimation of micro-biological contaminants in highly purified water
JIS K 0551:1994 Testing methods for total organic carbon in highly purified water

NL-NEN, Center Thickness Detection

NEN-EN 317-1993 Particleboards and fibreboards. Determination of swelling in thickness after immersion in water

Professional Standard - Building Materials, Center Thickness Detection

JC/T 2664-2022 China ISO Standard Sand Grain Size Testing Method

VE-FONDONORMA, Center Thickness Detection

TR-TSE, Center Thickness Detection

TS 3378-1979 TEXTILE FLOOR COVERINGS — DETERMINATION OF THICKNESS LOSS AFTER BRIEF, MODERATE STATIC LOODING.

Inner Mongolia Provincial Standard of the People's Republic of China, Center Thickness Detection

DB15/T 1258-2017 Standards for Evaluation and Evaluation of Service Object Satisfaction in Government Service Centers
DB15/T 500.5-2022 Technical Specifications for Lightning Protection Device Testing Part 5: Cloud Computing Data Center
DB15/T 975-2016 Detection method of carbon and nitrogen isotope abundance ratio in beef and mutton of livestock products

Professional Standard - Business, Center Thickness Detection

SB/T 10750-2012 Technical specification for product quality testing laboratory of the staple food processing & distributing center

NO-SN, Center Thickness Detection

NS 1181-1979 Metal and oxide coating - Measurement of thickness by microscopical examination of cross-sections

Fujian Provincial Standard of the People's Republic of China, Center Thickness Detection

DB35/T 1114-2011 Technical specification for detection of steel bar spacing and steel bar cover thickness by electromagnetic induction method

RO-ASRO, Center Thickness Detection

STAS 7156/1-1971 FIBRE BUILDING BOARDS MEDIUM-HARD, HARD AND EXTRA-HARD BOARDS. Determination of water absorption and swelling in thickness after total immersion in water.
STAS 7156/2-1971 Fibre building boards SOFT (POROUS) BOARDS. Determination, of water absorption aud swelling in thickness, after total itnmersion in water

CH-SNV, Center Thickness Detection

VSM 23890-1971

International Telecommunication Union (ITU), Center Thickness Detection

ITU-T Y.2770 NOTE-2013 Requirements for deep packet inspection in next generation networks
ITU-T Y.2770 ERRATUM 1-2013 Requirements for deep packet inspection in next generation networks; Erratum 1

National Association of Corrosion Engineers (NACE), Center Thickness Detection

NACE TM0384-1984 Holiday Detection of Internal Tubular Coatings of Less Than 250 Micrometers (10 mils) Dry-Film Thickness (Item No:21216)
NACE TM0384-2002 Holiday Detection of Internal Tubular Coatings of Less Than 250 Micrometers (10 mils) Dry-Film Thickness Item No:21216
NACE TM0186-1985 Holiday Detection of Internal Tubular Coatings of 250 to 760 um (10 to 30 Mils) Dry Film Thickness (Item No:21218)
NACE TM0186-2002 Holiday Detection of Internal Tubular Coatings of 250 to 760 um (10 to 30 Mils) Dry Film Thickness Item No:21218

European Committee for Electrotechnical Standardization（CENELEC）, Center Thickness Detection

EN 61341:2011 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
HD 347 S1-1988 Mechanical Vibration of Certain Rotating Electrical Machinery with Shaft Heights Between 80 and 400 mm Measurement and Evaluation of the Vibration Severity
HD 347-1977 Mechanical Vibration of Certain Rotating Electrical Machinery with Shaft Heights Between 80 and 400 mm Measurement and Evaluation of the Vibration Severity

International Electrotechnical Commission (IEC), Center Thickness Detection

IEC 61341:1994 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
IEC TR 61341:2010 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps

Professional Standard - Coal, Center Thickness Detection

MT/T 1013-2006 Guide for evaluation of uncertainty in measurement of coal test

Guangxi Provincial Standard of the People's Republic of China, Center Thickness Detection

DB45/T 2482-2022 Technical specification for detection of mildew on medium density fiberboard

Indonesia Standards, Center Thickness Detection

SNI 03-6894-2002 Test method for asphalt content from asphalt mixtures by centrifuge
SNI 06-7129-2005 Test methods of chromium (IV) content in leather by spectrophotometers

Yunnan Provincial Standard of the People's Republic of China, Center Thickness Detection

DB5306/T 52-2020 Zhaotong Municipal Service Center Service Object Satisfaction Evaluation Method

ES-AENOR, Center Thickness Detection

PL-PKN, Center Thickness Detection

PN M55651-1967 Metal cutting machinetools Centr? lathes with swing over ted op to 315 mm Accuracy testing
PN Z04523-2020-12 P Air purity protection -- Determination of hydrazine in workplaces by high performance liquid chromatography with spectrophotometric detection
PN M55551-06-1986 Metal cutting machin? tools ethods of measurement l" straightness and s?uareness l" a motion to a piane or to an axis
PN C01200-22-1988 Fire hazard and explosive conditions Parameters of inflammability and explosion Determination of thickness fibres in mean laboratory sample

Professional Standard - Commodity Inspection, Center Thickness Detection

SN/T 2943-2011 Determination of hydrogen sulfide content in natural gas by detection tube coloring length method

Hebei Provincial Standard of the People's Republic of China, Center Thickness Detection

DB13/T 2818-2018 Spectrophotometric method for detection of asparagus saponins in asparagus juice (powder)

Jiangsu Provincial Standard of the People's Republic of China, Center Thickness Detection

DB32/T 4397-2022 Technical specification for measuring the length of reinforcement cage in reinforced concrete piles

Professional Standard - Military and Civilian Products, Center Thickness Detection

WJ 2574-2002 The allowable concentration and detection method of too safe in the air of the workplace

国家粮食局, Center Thickness Detection

LS/T 6119-2017 Cereal and Oil Inspection Spectrophotometric Method for Determination of Polyphenols in Vegetable Oils

Universal Oil Products Company (UOP), Center Thickness Detection

UOP 702-2009 Impurities in Distilled High Purity Cumene by GC

US-CLSI, Center Thickness Detection

CLSI C51-A-2012 Expression of Measurement Uncertainty in Laboratory Medicine; Approved Guideline

AASHTO - American Association of State Highway and Transportation Officials, Center Thickness Detection

T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
T 177-2003 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)

The American Road & Transportation Builders Association, Center Thickness Detection

AASHTO T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)

American Society of Mechanical Engineers (ASME), Center Thickness Detection

ASME SEC V B SE-1647-2002 Standard Practice for Determining Contrast Sensitivity in Radioscopy ASTM E1647-98a