ZH
RU
ES
Our data quality is low
Our data quality is low, Total:135 items.
In the international standard classification, Our data quality is low involves: Electromechanical components for electronic and telecommunications equipment, Vocabularies, Textile fibres, Materials for the reinforcement of composites.
IT-UNI, Our data quality is low
ESDU - Engineering Sciences Data Unit, Our data quality is low
- ESDU 11006-2011 Extrapolating wind-tunnel data to full-scale Reynolds number Part 3: Example (ii) Comparison of extrapolated low-Reynolds-number lift measurements on the F4 wing/body with high-Reynolds-number measurements
German Institute for Standardization, Our data quality is low
- DIN EN 61076-4:1996 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 4: Generic specification (IEC 61076-4:1995); German version EN 61076-4:1996
- DIN EN 61076-5:2002-04 Connectors for use in d.c., low frequency analogue and digital high-speed data applications - Part 5: In-line sockets with assessed quality; Sectional specification (IEC 61076-5:2001); German version EN 61076-5:2001
- DIN EN 61076-5:2002 Connectors for use in d.c., low frequency analogue and digital high-speed data applications - Part 5: In-line sockets with assessed quality; Sectional specification (IEC 61076-5:2001); German version EN 61076-5:2001
- DIN EN 61076-4-104:1999-10 Connectors for use in d.c. low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality; detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a ...
- DIN EN 61076-4-103:1999-08 Connectors for use in d.c. low frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality; detail specification for two-part connectors with shielding and a basic grid of 2,5 mm (IEC 61076-4...
- DIN EN 61076-4:1996-07 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 4: Generic specification (IEC 61076-4:1995); German version EN 61076-4:1996
- DIN EN 61076-7:2001-06 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualifications and capability approval; Sectional specification (IEC 61076-7:2000); German v...
- DIN EN 61076-7:2001 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualifications and capability approval; Sectional specification (IEC 61076-7:2000); German vers
- DIN EN 61076-4-001:1997-04 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 4: Printed board connectors; section 001: Blank detail specification (IEC 61076-4-001:1996); German version EN 61076-4-001:1996
- DIN EN 61076-4-001:1997 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 4: Printed board connectors; section 001: Blank detail specification (IEC 61076-4-001:1996); German version EN 61076-4-001:1996
- DIN EN 61076-3-101:1998-05 Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors; Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells a...
- DIN EN 61076-4-103:1999 Connectors for use in d.c. low frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality; detail specification for two-part connectors with shielding and a basic grid of 2,5 mm (IEC 61076-4-10
- DIN EN 61076-3-101 Berichtigung 1:2012-07 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells...
- DIN EN 61076-3-101:1998 Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors; Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and
- DIN EN 61076-3-100:2000-10 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality; detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-remov...
- DIN EN 61076-4-104:1999 Connectors for use in d.c. low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality; detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a mul
- DIN EN 61076-3-100:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality; detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removabl
- DIN EN 61076-4-102:1997-10 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors; Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-i...
- DIN EN 61076-4-105:1999-02 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a w...
- DIN EN 61076-4-102:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors; Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in u
- DIN EN 61076-4-105:1999 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide
International Electrotechnical Commission (IEC), Our data quality is low
- IEC 61076-1/COR1:1995 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1: Generic specification
- IEC 61076-1:1995 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1: Generic specification
- IEC 61076-1/AMD1:1996 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1: Generic application - Capability approval; Amendment 1
- IEC 61076-5:2001 Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 5: In-line sockets with assessed quality; Sectional specification
- IEC 61076-2:1998 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 2: Circular connectors with assessed quality - Sectional specification
- IEC 61076-3:1999 Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 3: Rectangular connectors with assessed quality - Sectional specification
- IEC 61076-1/AMD2:2001 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1: Generic application; Capability approval; Amendment 2
- IEC 61076-4-001:1996 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 001: Blank detail specification
- IEC 61076-7:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification
- IEC 61076-4-101:1995 Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high speed data applications - Part 4: Printed boards connectors - Section 101: Detail specification for two-part connector modules having a basic grid of 2,0 mm for p
- IEC 61076-4-104:1999 Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on an
- IEC 61076-4-103:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm
- IEC 61076-4-100:1994 Connectors with assessed quality for use in d.c. and low frequency analogue applications and in digital applications with high speed data rates - Part 4: Printed board connectors; section 100: Detail specification for two-part connector modules having a g
- IEC 61076-3-100:1999 Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removab
- IEC 61076-3-101:1997/COR1:2010 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells an
- IEC 61076-4-105:1995 Connectors with assessed quality for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed boards connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide
British Standards Institution (BSI), Our data quality is low
- BS EN 61076-5:2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - In-line sockets with assessed quality - Sectional specification
- BS EN 61076-3-104:2003 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Rectangular connectors - Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up
- BS 9520:1983 Specification for electrical connectors of assessed quality for d.c. and low frequency application: generic data, methods of test and capability approval procedures
- BS EN 61076-4:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Sectional specification. Printed board connectors
- BS EN 61076-7:2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Cable outlet accessories with assessed quality, including qualification and capability approval. Sectional specification
- BS EN 61076-4-001:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Blank detail specification
- BS EN 61076-3-103:2004 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used
- BS EN 61076-3-101:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications. Rectangular connectors. Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rect...
- BS EN 61076-4-100:2002 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
- BS EN 61076-4-105:1998 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applicatio...
- BS EN 61076-4-103:1999 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm. Cable to board conn...
- BS EN 61076-4-110:2002 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shield...
- BS EN 61076-3-100:2004 Connectors for use in d.c., low-frequency analogue and digital high-speed data applications. Rectangular connectors with assessed quality. Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon cont
- BS EN 61076-3-100:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100:Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removabl
- BS EN 61076-4-102:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-cent...
- BS EN 61076-3-101:1998 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications. Rectangular connectors. Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectang
ECIA - Electronic Components Industry Association, Our data quality is low
- 700D000-1998 Sectional Specification for Discrete Contacts of Certified Quality (for Use in dc/Low Frequency Analog Applications and in Digital Applications Employing High Speed Data Rates)
Association Francaise de Normalisation, Our data quality is low
- NF C93-406-1:2002 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1 : generic specification.
- NF C93-406-5*NF EN 61076-5:2002 Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 5 : in-line sockets with assessed quality - Sectional specification
- NF EN 61076-4:2002 Connecteurs sous assurance de la qualité, pour utilisation dans le cadre d'applications analogiques en courant continu et à basse fréquence et dans le cadre d'applications numériques utilisant des débits élevés pour le transfert des données -...
- NF EN 61076-3-101:1998 Connecteurs sous assurance de la qualité, pour utilisation dans le cadre d'applications analogiques en courant continu et à basse fréquence et dans le cadre d'applications numériques utilisant des débits élevés pour le transfert des données -...
- NF EN 61076-4-105:1999 Connecteurs sous assurance de la qualité, pour utilisation dans le cadre d'applications analogiques en courant continu et à basse fréquence et dans le cadre d'applications numériques utilisant des débits élevés pour le transfert des données -...
- NF C93-406-1/A2:2002 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1 : generic specification - Capability approval.
- NF C93-406-1/A1:2002 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1 : generic specification - Capability approval.
- NF C93-406-3:2000 Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 3 : rectangular connectors with assessed quality - Sectional specification.
- NF C93-406-4*NF EN 61076-4:2002 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4 : sectionnal specification - Printed board connectors
- NF C93-406-1:1997 Connectors with assessed quality, for use in D.C., low-frequency analogue and in digital high-speed data applications. Part 4 : printed board connectors. Section 001 : blank detail specification.
- NF EN 61076-3-100:2000 Connecteurs pour applications analogiques en courant continu et à basse fréquence et pour applications numériques utilisant des débits élevés pour le transfert des données - Partie 3-100 : connecteurs rectangulaires sous assurance de la qualité...
- NF C93-406-3-001:2000 Connectors for use in d.c., low-frequency ananlogue and digital high-speed data applications - Part 3-001 : rectangular connectors with assessed quality - Blank detail specification.
- NF EN 61076-7:2001 Connecteurs sous assurance de la qualité, pour applications analogiques en courant continu et à basse fréquence et pour applications numériques utilisant des débits élevés pour le transfert des données - Partie 7 : accessoires de sorties de câ...
- NF C93-406-001*NF EN 61076-4-001:1997 Connectors with assessed quality, for use in D.C., low-frequency analogue and in digital high-speed data applications. Part 4 : printed board connectors. Section 001 : blank detail specification.
- NF C93-406-7*NF EN 61076-7:2001 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7 : cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification.
- NF C93-406-4-103*NF EN 61076-4-103:1999 Connecxtors for use in d.c. low-frequency analogue and digital high speed data applications. Part 4-103 : printed board connectors with assessed quality. Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm.
- NF C93-406-4-104*NF EN 61076-4-104:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications. Part 4-104 : printed board connectors with assessed quality. Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a mul
- NF C93-406-3-100*NF EN 61076-3-100:2000 Connectors for use in d.c., low frequencey analogue and digital high speed data applications - Part 3-100 : rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-remov
- NF C93-403-101*NF EN 61076-3-101:1998 Connectors with assessed quality, for use in D.C. Low-frequency analogue and in digital high-speed data applications. Part 3 : rectangular connectors. Section 101 : detail specification for a range of shielded connectors with trapezoidal shaped shells and
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Our data quality is low
- GB/T 18501.1-2001 Connectors with assessed quality,for use in d.c.,low frequency analogue and in digital high speed data applications--Part 1: Generic specification
- GB/T 18501.2-2001 Connectors for use in d.c.,low-frequency analogue and digital high speed data spplications--Part 2: Circular connectors with assessed quality--Sectional specification
CENELEC - European Committee for Electrotechnical Standardization, Our data quality is low
- EN 61076-3:2000 Connectors for Use in d.c.@ Low Frequency Analogue and Digital High-Speed Data Applications - Part 3: Rectangular Connectors with Assessed Quality Sectional Specification
- EN 61076-5:2001 Connectors for Use in d.c.@ Low-Frequency Analogue and Digital High-Speed Data Applications Part 5: In-Line Sockets with Assessed Quality - Sectional Specification
- EN 61076-3-001:2000 Connectors for Use in d.c.@ Low-Frequency Analogue and Digital High-Speed Data Applications - Part 3-001: Rectangular Connectors with Assessed Quality - Blank Detail Specification
ES-UNE, Our data quality is low
- UNE-EN 61076-5:2001 Connectors for use in d.c., low-frequency analogue and digital high-speed data applications -- Part 5: In-line sockets with assessed quality - Sectional Specification (Endorsed by AENOR in March of 2002.)
- UNE-EN 61076-4-102:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications -- Part 4: Printed board connectors -- Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plu...
- UNE-EN 61076-4-103:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications -- Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm. (Endorsed...
- UNE-EN 61076-3-100:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications -- Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-rem...
- UNE-EN 61076-4-104:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications -- Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on ...
- UNE-EN 61076-4-105:1998 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications -- Part 4: Printed board connectors -- Section 105 : Detail specification for 9 mm circular connector with 3 to 8 contacts for use in ...
Danish Standards Foundation, Our data quality is low
- DS/EN 61076-4:1996 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors
- DS/EN 61076-4-001:1997 Connectors with assessed quality for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 001: Blank detail specification
- DS/EN 61076-7:2001 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification
- DS/EN 61076-4-103:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm
- DS/EN 61076-3-101:1998 Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and
- DS/EN 61076-3-100:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removab
- DS/EN 61076-4-102:1998 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in
- DS/EN 61076-4-104:2000 Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on mul
- DS/EN 61076-4-105:1999 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide
Electronic Components, Assemblies and Materials Association, Our data quality is low
- ECA 700D000-1998 Sectional Specification for Discrete Contacts of Certified Quality (for Use in dc/Low Frequency Analog Applications and in Digital Applications Employing High Speed Data Rates)
- ECA SP2940-1-1997 Sectional Specification for Printed Board Connectors of Certified Quality (For Use in dc/Low Frequency Analog Applications and in Digital Applications Employing High Speed Data Rules) Comment Period Expires: December 15, 1997; EIA-700A000
AENOR, Our data quality is low
- UNE-EN 61076-4:1997 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 4: SECTIONAL SPECIFICATIONS. PRINTED BOARD CONNECTORS.
- UNE-EN 61076-4-001:1998 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 4: PRINTED BOARD CONNECTORS. SECTION 001: BLANK DETAIL SPECIFICATION.
- UNE-EN 61076-7:2001 Connectors for use in d.c., low-frequency analogue and digital high speed data applications -- Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification.
- UNE-EN 61076-3-101:1999 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 3: RECTANGULAR CONNECTORS. SECTION 101: DETAIL SPECIFICATION FOR A RANGE OF SHIELDED CONNECTORS WITH TRAPEZOIDAL SHAPED SHELLS AND N
IECQ - IEC: Quality Assessment System for Electronic Components, Our data quality is low
- QC 480400-2001 Connectors for Use in D.C.@ Low Frequency Analogue and Digital High-Speed Data Applications - Part 5: In-Line Sockets with Assessed Quality - Sectional Specification (IEC 61076-5:2001)
- QC 480300-1995 Connectors with Assessed Quality@ for Use in d.c.@ Low Frequency Analogue and in Digital High-Speed Data Applications - Part 4: Sectional Specification - Printed Board Connectors (IEC 1076-4 ED 1)
- QC 480301-1996 Connectors with Assessed Quality@ for Use in d.c.@ Low Frequency Analogue and in Digital High-Speed Data Applications - Part 4: Printed Board Connectors - Section 001: Blank Detail Specification (IEC 1076-4-001 ED 1)
- QC 480600-2000 Connectors for Use in d.c.@ Low Frequency Analogue and Digital High-Speed Data Applications - Part 7: Cable Outlet Accessories with Assessed Quality@ Including Qualification and Capability Approval - Sectional Specification (IEC 61076-7: 06-2000)
- QC 480000-1995 Connectors with Assessed Quality@ for Use in d.c.@ Low Frequency Analogue and in Digital High Speed Data Applications - Part 1: Generic Specification (IEC 61076-1:1995; Corrigendum:1995; Amendment 1:1996; Amendment 2:06-2001)
- QC 480201/XX 0002-1997 Connectors with Assessed Quality@ for Use in D.C.@ Low-Frequency Analogue and in Digital High-Speed Data Applications - Part 3: Rectangular Connectors - Section 101: Detail Specification for a Range of Shielded Connectors with Trapezoidal Shaped Shells an
- QC 480301/XX 0002-1995 Connectors with Assessed Quality@ for Use in d.c. Low-Frequency Analogue and in Digital High Speed Data Applications - Part 4: Printed Board Connectors - Section 101: Detail Specification for Two-Part Connector Modules Having a Basic Grid of 2@0 mm for Pr
- QC 480301/XX 0001-1994 Connectors with Assessed Quality for Use in d.c and Low Frequency Analogue Applications and in Digital Applications with High Speed Data Rates - Part 4: Printed Board Connectors - Section 100: Detail Specification Two-Part Connector Modules Having a Grid
- QC 480301/XX 0006-1995 Connectors with Assessed Quality@ for Use in d.c.@ Low-Frequency Analogue and in Digital High-Speed Data Applications - Part 4: Printed Board Connectors - Section 105: Detail Specification for 9 mm Circular Connector with 3 to 8 Contacts for Use in a Wide
RU-GOST R, Our data quality is low
- GOST 30351-2001 Polyamides, polyamide fibres, fabrics, films. Determination of mass fraction of residual caprolactam and low-molecular compounds and their concentration of migration in water. Methods of liquid and gas-liquid chromatography
European Committee for Electrotechnical Standardization(CENELEC), Our data quality is low
- EN 61076-4:1996 Connectors with Assessed Quality, for Use in d.c., Low Frequency Analogue and in Digital High-Speed Data Applications - Part 4: Sectional Specification Printed Board Connectors
- EN 61076-4-103:1999 Connectors for Use in d.c. Low-Frequency Analogue and Digital High Speed Data Applications Part 4-103: Printed Board Connectors with Assesed Quality - Detail Specification for Two-Part Connectors with Shielding and a Basic Grid of 2,5 mm
- EN 61076-4-104:1999 Connectors for Use in d.c. Low-Frequency Analogue and Digital High-Speed Data Applications - Part 4-104: Printed Board Connectors with Assessed Quality - Detail Specification for Two-Part Modular Connectors, Basic Grid of 2,0 mm, with Terminations on a Mu
- EN 61076-4-001:1996 Connectors with Assessed Quality, for Use in d.c., Low-Frequency Analogue and in Digital High-Speed Data Applications Part 4: Printed Board Connectors Section 001: Blank Detail Specification
- EN 61076-7:2000 Connectors for Use in d.c., Low-Frequency Analogue and Digital High Speed Data Applications Part 7: Cable Outlet Accessories with Assessed Quality, Including Qualification and Capability Approval - Sectional Specification
- EN 61076-3-101:1997 Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and
- EN 61076-3-100:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removab
- EN 61076-4-105:1998 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide
- EN 61076-4-102:1997 Connectors with Assessed Quality, for Use in d.c., Low-Frequency Analogue and in Digital High Speed Data Applications Part 4: Printed Board Connectors Section 102: Detail Specification for Two-Part Single-Pole Connectors, for Multiple Uses on Plug-In Unit
Professional Standard - Electron, Our data quality is low
- SJ/T 11306-2005 Connectors with assessed quality for DC/low frequency analogue and digital high speed data applications Part 4: Sectional specifications for printed board connectors
- SJ/T 11307-2005 Connectors with assessed quality, for use in d.c,low- frequency analogue and in digital high speed data applications-part 4: Printed board connecyors-Section 001:Blank detail specificationo
- SJ/T 11309-2005 Connectors for use in d.c,low frequency analogue and digital high speed data applications-part 4-104: printed board connecyors with assessed quality-detail specification for two-part modular connectors,basic grid of 2.0mm,with terminations on a multiple g
Lithuanian Standards Office , Our data quality is low
- LST EN 61076-4-2001 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications. Part 4: Sectional specification. Printed board connectors (IEC 61076-4:1995)
- LST EN 61076-7-2002 Connectors for use in d.c. low-frequency analogue and digital high speed data applications. Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval. Sectional specification (IEC 61076-7:2000)
- LST EN 61076-4-001-2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications. Part 4: Printed board connectors. Section 001: Blank detail specification (IEC 61076-4-001:1996)
- LST EN 61076-3-100-2001 Connectors for use in d.c., low- frequency analogue and digital high speed data applications. Part 3-100: Rectangular connectors with assessed quality. Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removabl
- LST EN 61076-3-101-2001 Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications. Part 3: Rectangular connectors. Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and n
- LST EN 61076-4-101-2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications. Part 4: Printed board connectors. Section 101: Detail specification for two-part connector modules having a basic grid of 2, 0 mm for pr
- LST EN 61076-4-105-2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications. Part 4: Printed board connectors. Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide r
- LST EN 61076-4-103-2001 Connectors for use in d.c. low-frequency analogue and digital high speed data applications. Part 4-103: Printed board connectors with assessed quality. Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm (IEC 61076-4-103
- LST EN 61076-4-102-2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Part 4: Printed board connectors. Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in un
- LST EN 61076-4-100-2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications. Part 4: Printed board connectors. Section 100: Detail specification for two-part connector modules having a grid of 2, 5 mm (0,098 in) f
- LST EN 61076-4-104-2001 Connectors for use in d.c. low-frequency analogue and digital high speed data applications. Part 4-104: Printed boards connectors with assessed quality. Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a mul