ZH
RU
ES
pin
pin, Total:367 items.
In the international standard classification, pin involves: Fasteners, Shipbuilding and marine structures in general, Shafts and couplings, Machine tool systems, Hinges, eyelets and other articulated joints, Fasteners for aerospace construction, Lubrication systems, Hand-held tools, Chipless working equipment, Semi-manufactures of timber, Agricultural machines, implements and equipment, Equipment for the chemical industry, Equipment for the rubber and plastics industries, Structures of buildings, Acoustics and acoustic measurements, Characteristics and design of machines, apparatus, equipment, Cutting tools, Building accessories, Mechanical testing, Materials for aerospace construction, Footwear, Road vehicle systems, Medical equipment, Wood, sawlogs and sawn timber, Construction materials, Mining and quarrying, Insulation, Road engineering, Ground service and maintenance equipment, Civil engineering in general, Flexible drives and transmissions, Commercial vehicles, Freight distribution of goods, Protection against dangerous goods, Fluid storage devices.
GM Daewoo, pin
German Institute for Standardization, pin
- DIN EN ISO 8741:1998 Grooved pins - Half-length reverse-taper grooved (ISO 8741:1997); German version EN ISO 8741:1997
- DIN EN ISO 8744:1998 Grooved pins - Full-length taper grooved (ISO 8744:1997); German version EN ISO 8744:1997
- DIN EN ISO 8743:1998 Grooved pins - Half-length centre grooved (ISO 8743:1997); German version EN ISO 8743:1997
- DIN EN ISO 8745:1998 Grooved pins - Half-length taper grooved (ISO 8745:1997); German version EN ISO 8745:1997
- DIN EN ISO 8742:1998 Grooved pins - One-third-length centre grooved (ISO 8742:1997); German version EN ISO 8742:1997
- DIN EN ISO 8740:1998 Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997); German version EN ISO 8740:1997
- DIN 1163:1973 Molding pins
- DIN EN ISO 8739:1998 Grooved pins - Full-length parallel grooved, with pilot (ISO 8739:1997); German version EN ISO 8739:1997
- DIN 21383:1988 Rope attachments; pins
- DIN 1442:1963 Drilled holes for lubrication of pins
- DIN 81410:1969 Pin bolts, coarse type, made of steel
- DIN EN ISO 8746:1998 Grooved pins with round head (ISO 8746:1997); German version EN ISO 8746:1997
- DIN 81411:2018-10 Pin bolts - Slight, fine type
- DIN 81410:2020-02 Pin bolts - Coarse type made of steel
- DIN EN ISO 8747:1998 Grooved pins with countersunk head (ISO 8747:1997); German version EN ISO 8747:1997
- DIN 81411:1977 Pin bolts, made of copper-zinc-alloy
- DIN 43161:1983 Pins for overhead equipment
- DIN 68150-1:2016-09 Wooden dowels - Dimensions, specifications
- DIN 81410:2012 Pin bolts - Coarse type made of steel
- DIN 81411:2012 Pin bolts - Slight, fine type
- DIN 5526:1999 Pins with head for rail vehicles
- DIN 5525:1999 Pins without head for rail vehicles
- DIN 548:2007 Round nuts with set pin holes in side
- DIN 5525:1999-11 Pins without head for rail vehicles
- DIN 5526:1999-11 Pins with head for rail vehicles
- DIN 43161:1983-06 Pins for overhead equipment
- DIN 64110:1973 Steel pins for wooden lags for teasers
- DIN EN 2364:1989-10 Aerospace; pins, shear, headed, close tolerance; german version EN 2364:1989
- DIN EN 14592:2022-08 Timber structures - Dowel-type fasteners - Requirements; German version EN 14592:2022
- DIN 6306:2002 Tommy screws with movable clamping bolt
- DIN 6304:2002 Tommy screws with fixed clamping bolt
- DIN EN 28749:1992-10 Determination of shear strength of pins (ISO 8749:1986); german version EN 28749:1992
- DIN 4000-9:2001 Tabular layouts of article characteristics - Part 9: Pins, rivets, split pins and keys
- DIN 74056:1976-01 Breakdown coupling; connection dimensions, pin and securing
- DIN 16243:1972 Drive pin wheel for chart recorders; dimensions for construction
- DIN EN 1380:2009-07 Timber structures - Test methods - Load bearing nails, screws, dowels and bolts; German version EN 1380:2009
- DIN 7341:1977-07 Rivet Pins
- DIN 74056:1976 Breakdown coupling; connection dimensions, pin and securing
- DIN EN 2364:1989 Aerospace; pins, shear, headed, close tolerance; german version EN 2364:1989
- DIN EN ISO 407:2021-09 Small medical gas cylinders - Pin-index yoke-type valve connections (ISO 407:2021); German version EN ISO 407:2021
- DIN EN ISO 407:2023-04 Small medical gas cylinders - Pin-index yoke-type valve connections (ISO/FDIS 407:2023); German and English version prEN ISO 407:2023 / Note: Date of issue 2023-03-24*Intended as replacement for DIN EN ISO 407 (2021-09).
- DIN 48004:1969 Insulators for overhead power lines; pin type insulators St, rated voltages 10 to 30 kV
- DIN EN 409:2009-08 Timber structures - Test methods - Determination of the yield moment of dowel type fasteners; German version EN 409:2009
- DIN V 65900-11:2001 Aerospace series - Bolts and pins - Materials (AECMA Technical Report TR 3775:1999)
- DIN EN 3151:1995-08 Aerospace series - Dowels, plain, in heat resisting nickel base alloy NI-P100HT (Inconel 718); German version EN 3151:1995
- DIN V 65900-11:2001-01 Aerospace series - Bolts and pins - Materials (AECMA Technical Report TR 3775:1999)
- DIN EN 13877-3:2005-02 Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements; German version EN 13877-3:2004
- DIN EN 3777:2011-02 Aerospace series - Pins, quick release, single and double acting - Technical specification; German and English version EN 3777:2010
- DIN 8188-3:1998 Roller chains - American type - Part 3: Simple roller chains with extended pins; connecting dimensions
- DIN 8187-3:1998 Roller chains - European type - Part 3: Simple roller chains with extended pins; connecting dimensions
- DIN EN 383:2007-03 Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners; German version EN 383:2007
- DIN EN 2236:1992 Aerospace series; pins, shear, headed, close tolerance shank, alloy steel; technical specification; german version EN 2236:1992
- DIN EN 3150:1995-08 Aerospace series - Pins, shoulder, headless, in heat resisting nickel base alloy NI-P100HT (Inconel 718); German version EN 3150:1995
- DIN EN 1380:2009 Timber structures - Test methods - Load bearing nails, screws, dowels and bolts; English version of DIN EN 1380:2009-07
- DIN EN ISO 12777-1:2009-03 Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples (ISO 12777-1:1994 + Amd 1:2008); German version EN ISO 12777-1:1996 + A1:2008
- DIN EN 16784:2016-12 Timber structures - Test methods - Determination of the long term behaviour of coated and uncoated dowel-type fasteners; German version EN 16784:2016
US-GSA, pin
Japanese Industrial Standards Committee (JISC), pin
Professional Standard - Aviation, pin
Association Francaise de Normalisation, pin
- NF E25-750*NF EN ISO 8743:1997 Grooved pins. Half length centre grooved.
- NF E25-761*NF EN ISO 8739:1997 Grooved pins. Full-length parallel grooved, with pilot.
- NF E25-766*NF EN ISO 8746:1997 Grooved pins with round head.
- NF E27-381:1969 Clevis pins and screwed spindles.
- NF E71-212:2015 Broches et ciseaux du bâtiment
- NF ISO 5838-2:1994 Implants chirurgicaux - Fils et broches pour os - Partie 2 : broches de type Steinmann - Dimensions.
- NF E25-765*NF EN ISO 8745:1997 Grooved pins. Half-length taper grooved.
- NF E25-764*NF EN ISO 8744:1997 Grooved pins. Full-length taper grooved.
- NF E21-503:1975 Forked clamps with trunnion.
- NF E25-762*NF EN ISO 8741:1997 Grooved pins. Half-length reverse-taper grooved.
- NF L22-063:1970 Clearance for wrenching nuts, screws and pins.
- NF E71-211:2015 Chasse-clous (ou poinçons) - Chasse-goupilles - Pointeaux
- NF E25-763*NF EN ISO 8742:1997 Grooved pins. One-third-length centre grooved.
- NF E25-756*NF EN ISO 8734:1997 Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins).
- NF G62-120:2004 Footwear - Test methods for heels - Heel pin holding strength.
- NF E22-110:1981 Washers, for hexagonal nuts, extra light series.
- NF EN 14420-3:2013 Raccords pour flexibles avec demi-coquille - Partie 3 : colliers boulonnés ou goupillés
- NF EN 1380:2009 Structures en bois - Méthode d'essai - Pointes, tire-fonds, broches et boulons porteurs
- NF E25-751*NF EN ISO 2338:1997 Parallel pins, of unhardened steel and austenitic stainless steel.
- NF R13-433:1987 Road vehicles. Flat tab connections without positive locking. Functional characteristics.
- NF R13-437:1987 Road vehicles. Flat tab connections with positive locking. Functional characteristics.
- NF EN 13877-3:2005 Chaussées en béton - Partie 3 : spécifications relatives aux goujons à utiliser dans les chaussées en béton
- NF E25-757*NF EN ISO 8735:1997 Parallel pins with internal thread, of hardened steel and martensitic stainless steel.
- NF E25-755*NF EN ISO 8733:1997 Parallel pins with internal thread, of unhardened steel and austenitic stainless steel.
- NF E27-854:1982 Metal-hose clamps for general purposes ; band type, without screws, re-usable, pin or axle clamps.
- NF L22-740*NF EN 2236:1992 Aerospace series. Pins, headed, close tolerance shank, in alloy steel. Technical specification.
- NF L26-302*NF EN 3151:1995 Aerospace series. Dowels, plain, in heat resisting nickel base alloy ni-P100HT (inconel 718).
- NF EN ISO 22088-4:2006 Plastiques - Détermination de la fissuration sous contrainte dans un environnement donné (ESC) - Partie 4 : méthode par enfoncement de billes ou de goupilles
- NF L26-301*NF EN 3150:1995 Aerospace series. Pins, shoulder, headless, in heat resisting nickel base alloy ni-P100HT (inconel 718).
- NF ISO 4558:1987 Navires de plaisance - Ridoirs pour câbles en acier inoxydable - Dimensions principales des chapes, axes et attaches.
- NF T81-151:2016 Transportation and handling of chemicals - Road tankers - Caps for valves fixed by pins or bolts
- NF T81-151:1977 Transportation and handling of chemicals. Road tankers. Caps for valves fixed by pins or bolts.
- NF S90-532:1973 Medical and surgical equipment. Components for artificial limbs and joints. Hip joint with fork fitting and ball-bearings, without bolt.
- NF P21-404*NF EN 16784:2017 Timber structures - Test methods - Determination of the long term behaviour of coated and uncoated dowel-type fasteners
RU-GOST R, pin
AT-ON, pin
IT-UNI, pin
Society of Automotive Engineers (SAE), pin
- SAE AS20253-2000 Pin, Hinge FSC 5315
- SAE AIR3277-1981 Installation Procedures - Pin/Plug Expansion Type
- SAE AMS7205F-2003 Spring Pins, Tubular Carbon Steel
- SAE AS3132A-2009 Pin, Expansion - CRES, 303, Short, UNS S30300
- SAE AS9468-1999 PIN, STRAIGHT, HEADED .497 DIAMETER, AMS 5735 FSC 5315
- SAE AS9843A-2004 (R) PIN, STRAIGHT, HEADED, .1249 DIAMETER, UNS S41800 FSC 5315
- SAE AS9848A-2004 (R) PIN, STRAIGHT, HEADED, .4999 DIAMETER, UNS S41800 FSC 5315
- SAE AS3128A-2009 Pin, Expansion - CRES, 416 or 416SE, Short UNS S41600/UNS S41623
- SAE AS3126B-2014 PIN, EXPANSION - CRES, 416 OR 416SE, LONG, UNS S41600/UNS S41623
- SAE AS9465A-2002 (R) Pin, Straight, Headed, .311 Diameter, Cres, UNS S66286
- SAE AS7211A-1996 Pin, Cotter, Steel, Corrosion and Heat Resistant UNS S32100 Procurement Specification
- SAE AS9390D-2019 PIN, STRAIGHT, HEADLESS, DOWEL - CORROSION AND HEAT RESISTANT STEEL (UNS S66286), STANDARD AND OVERSIZE
- SAE AS3587A-2009 Pin and Plug, Expansion, Set of Parts, Std and .010 Oversize Diameters, Cres, 303, Short UNS S30300
- SAE AS3587-2006 PIN AND PLUG, EXPANSION, KIT CRES, 303, SHORT
Professional Standard - Speciality, pin
CZ-CSN, pin
AENOR, pin
- UNE 56864:1993 WOOD DOWELS. REQUIREMENTS.
- UNE 56862:1993 WOOD DOWELS. DEFINITIONS, CLASSIFICATION AND TERMINOLOGY.
- UNE 56863:1993 WOOD DOWELS. SAMPLING AND TEST METHODS.
- UNE 27365:1974 DECK DOWEL FOR DRILL AND FILLING INLETS.
- UNE-EN 1380:2009 Timber structures - Test methods - Load bearing nails, screws, dowels and bolts
- UNE-EN 3151:1996 AEROSPACE SERIES. DOWELS, PLAIN, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718).
- UNE-EN 13364:2002 Natural stone test methods - Determination of the breaking load at dowel hole
- UNE-EN 13877-3:2005 Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements
- UNE-EN 383:2007 Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners
Professional Standard - Automobile, pin
TR-TSE, pin
- TS 1106-1972 PISTONS AND GUDGEON PINS FOR INTERNAL OOMBUSTTON ENGINES
- TS 2268-1976 Quartz Crystal Unit Holders For Oscillators And Pin Connectiors
American Society of Mechanical Engineers (ASME), pin
Group Standards of the People's Republic of China, pin
- T/ZZB 2225-2021 Sealed type pin quick—operating latch 2021
- T/ZZB 0662-2018 P2 hybrid drive system pin
- T/ZS 0306-2022 Technical specification for Specical-shaped square hollow piles of prestressed concrete connected by end-plate or pin
AIA/NAS - Aerospace Industries Association of America Inc., pin
- NASM21143-1999 Pin@ Straight@ Headless (Dowel)@ General Specification for
- NAS607-1995 Pin@ Straight@ Headless - (Dowel) (Rev. 4)
- NAS607-2007 Pin@ Straight@ Headless - (Dowel) (Rev 5)
- NASM51987-1998 Pin@ Spring-Tubular@ Coiled@ Light Duty
- NASM39086-1999 Pin@ Spring-Tubular@ Coiled@ Heavy Duty
- NAS41-1978 Pins@ Continuous Hinge (Rev 2)
- NAS1413-2003 Pins and Collars@ Swage Locking (Rev 8)
- NASM21143/1-2001 Pin@ Straight@ Headless@ (Dowel) (.0002 Over Size)@ Cres 303
- NASM16555-1999 Pin@ Straight@ Headless (Dowel) (.0002 over Nominal Size)
- NASM16556-1998 Pin@ Straight@ Headless (Dowel) (.001 Over Nominal Size)
- NASM21143/2-2001 Pin@ Straight@ Headless@ (Dowel) (.0002 Under Size)@ Cres 303
- NAS1413-2011 PINS AND COLLARS@ SWAGE LOCKING (Rev 9)
- NAS1413-2016 PINS AND COLLARS@ SWAGE LOCKING (Rev 10)
- NAS1413-1992 Pins and Collars@ Swage Locking (Rev 6)
- NAS1413-1997 Pins and Collars@ Swage Locking (Rev 7)
- NASM35675-1999 Pin@ Grooved@ Headless-Longitudinal Straight Groove@ Corrosion-Resisting Steel
- NASM21143-2012 PIN@ STRAIGHT@ HEADLESS (DOWEL)@ GENERAL SPECIFICATION FOR (Rev 1)
- NASM21143-2019 PIN@ STRAIGHT@ HEADLESS (DOWEL)@ GENERAL SPECIFICATION FOR (Rev 2)
- NAS6935-6942-2011 PIN@ SWAGE LOCKING@ STEEL@ 100° CROWN HEAD@ TENSION@ PULL-TYPE (Rev 1)
- NASM21143/2-2011 PIN@ STRAIGHT@ HEADLESS@ (DOWEL) (.0002 UNDER SIZE)@ CRES 303 (Rev 1)
- NASM21143/2-2017 PIN@ STRAIGHT@ HEADLESS@ (DOWEL) (.0002 UNDER SIZE)@ CRES 303 (Rev 2)
- NAS1516-1522-2011 PIN@ SWAGE LOCKING@ ALUMINUM ALLOY@ 100° HEAD (NASM24694)@ PULL-TYPE (Rev 3)
- NAS1516-1522-2016 PIN@ SWAGE LOCKING@ ALUMINUM ALLOY@ 100° HEAD (NASM24694)@ PULL-TYPE (Rev 4)
- NAS1414-1422-2014 PIN@ SWAGE LOCKING@ STEEL@ 100° SHEAR HEAD@ STUMP TYPE (Rev 6)
- NASM16556-2010 PIN@ STRAIGHT@ HEADLESS (DOWEL) (.001 OVER NOMINAL SIZE) (Rev 1)
- NASM16555-2010 Pin@ Straight@ Headless (Dowel) (.0002 Over Nominal Size) (Rev 1)
- NASM16556-2014 PIN@ STRAIGHT@ HEADLESS (DOWEL) (.001 OVER NOMINAL SIZE) (Rev 2)
- NASM17990-1998 Pin@ quick release@ positive locking@ double acting@ ring handle
- NAS6915-6922-1973 Pin@ Swage Locking@ Aluminum Alloy@ 100 Degree Head (MS20426)@ Tension@ Stump-Type
- NAS1525-1532-2018 PIN@ SWAGE LOCKING@ ALUMINUM ALLOY@ PROTRUDING HEAD@ TENSION@ PULL-TYPE (Rev 5)
- NAS1525-1532-2011 PIN@ SWAGE LOCKING@ ALUMINUM ALLOY@ PROTRUDING HEAD@ TENSION@ PULL-TYPE (Rev 3)
- NAS1525-1532-2015 PIN@ SWAGE LOCKING@ ALUMINUM ALLOY@ PROTRUDING HEAD@ TENSION@ PULL-TYPE (Rev 4)
- NAS2035-2042-2012 PIN@ RIVET@ GROOVED@ TITANIUM (COMPOSITE APPLICATIONS)@ 130° FLUSH HEAD@ PULL-TYPE (Rev 1)
- NAS2025-2032-2012 PIN@ RIVET@ GROOVED@ TITANIUM@ COMPOSITE APPLICATIONS@ 100° FLUSH HEAD@ PULL-TYPE (Rev 1)
- NAS2025-2032-2019 PIN@ RIVET@ GROOVED@ TITANIUM@ COMPOSITE APPLICATIONS@ 100° FLUSH HEAD@ PULL-TYPE (Rev 2)
- NAS1725-1992 Pin-Rivet@ Threaded@ Taper Shank@ Shear Type@ 100 Degree Head - Oversize (Rev 1)
- NAS6913-1992 Pin@ Swage Locking@ pH13-8Mo CRES@ 100 Degree Crown Head@ Shear@ Pull-Type (Rev 1)
- NAS1555-1562-2015 PIN@ SWAGE LOCKING@ ALUMINUM ALLOY@ PROTRUDING HEAD@ TENSION@ STUMP-TYPE (Rev 6)
- NAS1555-1562-2011 PIN@ SWAGE LOCKING@ ALUMINUM ALLOY@ PROTRUDING HEAD@ TENSION@ STUMP-TYPE (Rev 5)
- NASM17984-1998 Pin@ quick release@ self-retaining@ positive locking@ single acting@ button handle
- NASM17986-2016 PIN@ QUICK RELEASE@ SELF-RETAINING@ POSITIVE LOCKING@ SINGLE ACTING@ “L” HANDLE (Rev 2)
- NASM17986-2011 PIN@ QUICK RELEASE@ SELF-RETAINING@ POSITIVE LOCKING@ SINGLE ACTING@ “L” HANDLE (Rev 1)
- NASM17985-2012 PIN@ QUICK RELEASE@ SELF-RETAINING@ POSITIVE LOCKING@ SINGLE ACTING@ “T” HANDLE (Rev 1)
- NASM17989-2016 PIN@ QUICK RELEASE@ SELF-RETAINING@ POSITIVE LOCKING@ DOUBLE ACTING@ “L” HANDLE (Rev 2)
- NASM17985-2016 PIN@ QUICK RELEASE@ SELF-RETAINING@ POSITIVE LOCKING@ SINGLE ACTING@ “T” HANDLE (Rev 2)
- NAS6912-1991 Pin@ Swage Locking@ pH13-8Mo CRES@ Protruding Head@ Shear@ Stump-Type Superseded (Rev 1)
- NASM17989-2011 PIN@ QUICK RELEASE@ SELF-RETAINING@ POSITIVE LOCKING@ DOUBLE ACTING@ “L” HANDLE (Rev 1)
- NAS1436-1442-2015 PIN@ SWAGE LOCKING@ STEEL@ STANDARD AND OVERSIZE@ 100° SHEAR HEAD@ PULL-TYPE (Rev 4)
- NAS1436-1442-2011 PIN@ SWAGE LOCKING@ STEEL@ STANDARD AND OVERSIZE@ 100° SHEAR HEAD@ PULL-TYPE (Rev 3)
- NASM17988-2011 PIN@ QUICK RELEASE@ SELF-RETAINING@ POSITIVE LOCKING@ DOUBLE ACTING@ “T” HANDLE (Rev 1)
- NASM17988-2016 PIN@ QUICK RELEASE@ SELF-RETAINING@ POSITIVE LOCKING@ DOUBLE ACTING@ “T” HANDLE (Rev 2)
- NAS6911-1991 Pin@ Swage Locking@ pH13-8Mo CRES@ 100 Deg Head@ Shear@ Stump-Type Superseded (Rev 1)
- NA0157-0158-2012 PIN@ QUICK RELEASE@ SELF-RETAINING@ POSITIVE LOCKING@ SINGLE ACTING@ “T” HANDLE@ METRIC (Rev 1)
- NAS2014-1991 Pin-Rivet@ Grooved; and Collar for Composite Materials
American Society for Testing and Materials (ASTM), pin
- ASTM D8023-17 Standard Specification for Round Wood Dowels (Pegs) for Use in Wood Construction
- ASTM D8023-23 Standard Specification for Round Wood Dowels (Pegs) for Use in Wood Construction
- ASTM F366-04 Standard Specification for Fixation Pins and Wires
- ASTM G132-96(2013) Standard Test Method for Pin Abrasion Testing
- ASTM A1078/A1078M-12 Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement
SE-SIS, pin
British Standards Institution (BSI), pin
- BS 1804-3:1973 Specification for parallel steel dowel pins - Parallel and taper types having screw threads for extraction purposes - Metric series
- BS EN 14592:2022 Timber structures - Dowel-type fasteners - Requirements
- BS EN 14592:2008 Timber structures - Dowel-type fasteners - Requirements
- BS EN ISO 13337:2009 Spring-type straight pins - Slotted, light duty(ISO 13337:2009)
- 17/30357371 DC BS EN 14592. Timber structures. Dowel-type fasteners. Requirements
- BS EN 2236:1992 Pins, headed, close tolerance shank, in alloy steel. Technical specification
- BS 1804-1:1966 Specification for parallel steel dowel pins - Inch series
- BS 1804-2:1968 Specification for parallel steel dowel pins - Metric series
- 20/30408115 DC BS EN ISO 407. Small medical gas cylinders. Pin-index yoke-type valve connections
- BS EN ISO 407:2021 Tracked Changes. Small medical gas cylinders. Pin-index yoke-type valve connections
- BS AU 2a:1970 Specification for dimensions of 31/2 - 41/2 in diameter fifth wheel king pin for use with extra heavy duty semi-trailers
NL-NEN, pin
CH-SNV, pin
RO-ASRO, pin
Professional Standard - Chemical Industry, pin
SAE - SAE International, pin
国家发展和改革委员会, pin
Indonesia Standards, pin
Aerospace Industries Association/ANSI Aerospace Standards, pin
- AIA/NAS NAS1322-1326-2011 PIN, THREADED, SHEAR, PROTRUDING HEAD (Rev 4)
- AIA/NAS NAS1292-1296-2012 PIN, THREADED, SHEAR, 100° CSK HEAD (Rev 4)
- AIA/NAS NAS574-2012 PIN, REAR MOUNTING, ELECTRONIC EQUIPMENT Rev 8
- AIA/NAS NASM16555-2014 PIN, STRAIGHT, HEADLESS, DOWEL, .0002 OVER NOMINAL SIZE (Rev 2)
- AIA/NAS NASM16555-2016 PIN, STRAIGHT, HEADLESS, DOWEL, .0002 OVER NOMINAL SIZE (Rev 3)
- AIA/NAS NAS2045-2052-2012 PIN, RIVET, GROOVED, TITANIUM, COMPOSITE APPLICATIONS, PROTRUDING HEAD, STUMP-TYPE (Rev 1)
- AIA/NAS NAS2055-2062-2012 PIN, RIVET, GROOVED, TITANIUM, COMPOSITE APPLICATIONS, 100° FLUSH HEAD, STUMP TYPE (Rev 1)
- AIA/NAS NAS6984-6992-2012 PIN, SWAGE LOCKING, A286 CRES, PROTRUDING HEAD, SHEAR, STUMP-TYPE (Rev 3)
- AIA/NAS NASM17986-2011 PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, “L” HANDLE
- AIA/NAS NASM17988-2011 PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, DOUBLE ACTING, “T” HANDLE
- AIA/NAS NASM17989-2011 PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, DOUBLE ACTING, “L” HANDLE
- AIA/NAS NASM17985-2012 PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, “T” HANDLE
- AIA/NAS NAS7024-7032-2014 PIN, SWAGE LOCKING, 108 KSI STEEL, 100° SHEAR/TENSION HEAD, PULL-TYPE (Rev 3)
- AIA/NAS NAS7014-7022-2016 PIN, SWAGE LOCKING, A286 CRES, PROTRUDING HEAD, SHEAR/TENSION, PULL-TYPE (Rev 4)
- AIA/NAS NAS1555-1562-2015 PIN, SWAGE LOCKING, ALUMINUM ALLOY, PROTRUDING HEAD, TENSION, STUMP-TYPE (Rev 6)
- AIA/NAS NASM17985-2016 PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, “T” HANDLE (Rev 2)
- AIA/NAS NASM17988-2016 PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, DOUBLE ACTING, “T” HANDLE (Rev 2)
- AIA/NAS NASM17989-2020 PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, DOUBLE ACTING, “L” HANDLE (Rev 3)
- AIA/NAS NAS7034-7042-2011 PIN, SWAGE LOCKING, ALLOY STEEL, 108 KSI Fsu, PROTRUDING HEAD, SHEAR/TENSION, PULL-TYPE Rev 2
- AIA/NAS NAS1446-1452-2014 PIN, SWAGE LOCKING, STEEL, STANDARD AND OVERSIZE, PROTRUDING HEAD, SHEAR, PULL-TYPE (Rev 4)
- AIA/NAS NAS1446-1452-2011 PIN, SWAGE LOCKING, STEEL, STANDARD AND OVERSIZE, PROTRUDING HEAD, SHEAR, PULL-TYPE Rev 3
- AIA/NAS NAS7034-7042-2014 PIN, SWAGE LOCKING, ALLOY STEEL, 108 KSI Fsu, PROTRUDING HEAD, SHEAR/TENSION, PULL-TYPE (Rev 3)
GOSTR, pin
未注明发布机构, pin
ES-UNE, pin
- UNE-EN 14592:2023 Timber structures - Dowel-type fasteners - Requirements
- UNE-EN ISO 407:2022 Small medical gas cylinders - Pin-index yoke-type valve connections (ISO 407:2021)
- UNE-EN 16784:2016 Timber Structures - Test methods - Determination of the long term behaviour of coated and uncoated dowel-type fasteners
European Committee for Standardization (CEN), pin
- EN 2367:1989 Split Pins in Steel EN 2573
- EN 2364:1989 Aerospace series - Pins, shear, headed, close tolerance
- EN 1380:2009 Timber structures - Test methods - Load bearing nails, screws, dowels and bolts
- EN ISO 407:2023 Small medical gas cylinders - Pin-index yoke-type valve connections (ISO 407:2023)
- EN 2236:1992 Pins, Headed, Close Tolerance Shank, in Alloy Steel - Technical Specification
Danish Standards Foundation, pin
- DS/EN 1380:2009 Timber structures - Test methods - Load bearing nails, screws, dowels and bolts
- DS/EN 2236:1992 Aerospace series. Pins, headed, close tolerance shank, in alloy steel. Technical specification
- DS/EN 13364:2002 Natural stone test methods - Determination of breaking load at dowel hole
- DS/EN 13877-3:2005 Concrete pavements – Part 3: Specifications for dowels to be used in concrete pavements
- DS/EN 383:2007 Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners
- DS/EN 3151:1995 Aerospace series - Dowels, plain, in heat resisting nickel base alloy NI-P100HT (Inconel 718)
Lithuanian Standards Office , pin
- LST EN 1380-2009 Timber structures - Test methods - Load bearing nails, screws, dowels and bolts
- LST EN 13364-2002 Natural stone test methods - Determination of the breaking load at dowel hole
- LST EN 13877-3-2005 Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements
- LST EN 383-2007 Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners
- LST EN 3151-2001 Aerospace series - Dowels, plain, in heat resisting nickel base alloy NI-P100HT (Inconel 718)
FI-SFS, pin
- SFS 8044-1987 In case of interpretation disputes the Finnish textapplies
Aerospace Industries Association, pin
- AIA NAS 2015-2022-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) Protruding Head, Pull-Type
- AIA NAS 2022-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) Protruding Head, Pull-Type
- AIA NAS 2015-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) Protruding Head, Pull-Type
- AIA NAS 2016-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) Protruding Head, Pull-Type
- AIA NAS 2018-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) Protruding Head, Pull-Type
- AIA NAS 2020-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) Protruding Head, Pull-Type
- AIA NAS 2045-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) Protruding Head, Stump-Type
- AIA NAS 2045-2052-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) Protruding Head, Stump-Type
- AIA NAS 2046-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) Protruding Head, Stump-Type
- AIA NAS 2048-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) Protruding Head, Stump-Type
- AIA NAS 2050-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) Protruding Head, Stump-Type
- AIA NAS 2052-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) Protruding Head, Stump-Type
- AIA NAS 2035-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 130 Degree Flush Head, Pull-Type
- AIA NAS 2035-2042-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 130 Degree Flush Head, Pull-Type
- AIA NAS 2036-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 130 Degree Flush Head, Pull-Type
- AIA NAS 2038-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 130 Degree Flush Head, Pull-Type
- AIA NAS 2040-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 130 Degree Flush Head, Pull-Type
- AIA NAS 2042-1991 Pin-Rivet, Grooved, Titanium (Composite Applications) 130 Degree Flush Head, Pull-Type
- AIA NAS 2013-1991 Collar, Grooved, Pin-Rivet, Titanium, (Composite Applications)
- AIA NAS 2014-1991 Pin-Rivet, Grooved; and Collar for Composite Materials
European Association of Aerospace Industries, pin
- AECMA PREN 2236-1990 Aerospace Series Pins, Shear, Headed, Close Tolerance Technical Specification Edition 1
Aerospace, Security and Defence Industries Association of Europe (ASD), pin
International Organization for Standardization (ISO), pin
- ISO 407:2014 Small medical gas cylinders — Pin-index yoke-type valve connections
Standard Association of Australia (SAA), pin
- ISO 407:2023 Small medical gas cylinders — Pin-index yoke-type valve connections
CEN - European Committee for Standardization, pin
- EN 1380:1999 Timber Structures - Test Methods - Load Bearing Nailed Joints
Korean Agency for Technology and Standards (KATS), pin
- KS F 2156-2017 Method of dowel-bearing strength test for wood and wood-based products
- KS T ISO 12777-1-2008(2018) Methods of test for pallet joints-Part 1:Determination of bending resistance of pallet nails, other dowel-type fasteners and staples
BE-NBN, pin
- NBN-EN 2364-1993 Aerospace series. Pins, shear, headed, close tolerance
- NBN-EN 2236-1992 Aprospace series-pins,headed,close tolerance shank,in alloy steel-Technical specification
The American Road & Transportation Builders Association, pin
- AASHTO M 254-1977 Standard Specification for Corrosion Resistant Coated Dowel Bars HM-22; PART IA R(2000)
American Railway Engineering and Maintenance-of-Way Association (AREMA), pin
- AREMA CH 3-10-1984 Recommended Practice for the Manufacture of Two-Piece Steel Doweled Laminated Cross Ties (TPSDLC)
IN-BIS, pin
PL-PKN, pin
- PN M82070-1974 Bolts and studs Slotted or drilled head or shank with split pin hole
YU-JUS, pin
- JUS A.A4.202-1990 Tabular layouts ofarticle characteristics for bolts, pins, rivets, split pins and keys
- JUS G.S2.625-1982 Plastics. Determination of enov iron mental stress cracking (ESC). Ball or pin inpression method
IFI/FASTNR - Industrial Fastener Institute, pin
AREMA - American Railway Engineering and Maintenance-of-Way Association, pin
- CHAPTER 3/PART 10-1984 Recommended Practice for the Manufacture of Two-Piece Steel Doweled Laminated Cross Ties (TPSDLC) (Volume 1/Track)
Professional Standard - Military and Civilian Products, pin
Taiwan Provincial Standard of the People's Republic of China, pin