ZH
RU
ES

temperature crosslinking degree

temperature crosslinking degree, Total:498 items.

In the international standard classification, temperature crosslinking degree involves: Pipeline components and pipelines, Electrical wires and cables, Industrial automation systems, Applications of information technology, Fasteners for aerospace construction, Linear and angular measurements, Plastics, Electricity. Magnetism. Electrical and magnetic measurements, Thermodynamics and temperature measurements, Telecommunication terminal equipment, Water quality, Welding, brazing and soldering, Shipbuilding and marine structures in general, Refrigerating technology, Networking, Iron and steel products, Quantities and units, Resistors, Fluid storage devices, Products of the textile industry, Equipment for children, Extraction and processing of petroleum and natural gas, Geology. Meteorology. Hydrology, Semiconductor devices, Electrical accessories, Optics and optical measurements, Installations in buildings, Materials for aerospace construction, Glass, Footwear, Lubricants, industrial oils and related products, Construction materials, Road engineering, Services, Radiation measurements, Burners. Boilers, Measurement of volume, mass, density, viscosity, Lighting, Protective equipment, Road vehicle systems, Aircraft and space vehicles in general, Industrial furnaces, Petroleum products in general, Measurement of fluid flow, Vocabularies, Machine tools, Chipless working equipment, Automatic controls for household use, Medical equipment, Quality, Fibre optic communications, Conducting materials, Test conditions and procedures in general, Standardization. General rules, Radiocommunications, On-board equipment and instruments, Environmental testing, Metrology and measurement in general, Electronic components in general, Printed circuits and boards, Testing of metals, Astronomy. Geodesy. Geography.

International Organization for Standardization (ISO), temperature crosslinking degree

ISO 10146:2019 Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX) — Effect of time and temperature on expected strength
ISO 10146:1997 Crosslinked polyethylene(PE-X)pipes - Effect of time and temperature on the expected strength
ISO 10147:1994 Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content
ISO 10147:2004 Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content
ISO 10147:2011 Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content
ISO 13916:2017 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
ISO 13916:1996 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
ISO 14322:2012 Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
ISO 20368:2017 Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by Fourier Transform Infrared (FTIR) Spectroscopy
ISO 10147:2004/Amd 1:2008 Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content; Amendment 1
ISO 14322:2018 Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)
ISO 9199:1998 Aerospace - Nuts, bihexagonal, self-locking, MJ threads, classifications: 1100 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/425 °C, 1210 MPa (at ambient temperature)/730 °C, 1550 MPa (at
ISO 9609:2016 Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature) /120 degrees C, 450 MPa (at ambient temperature) /235 degrees C, 600 MPa (at ambient temperature) /425 degrees C, 9
ISO 9618:2016 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425
ISO 9609:1996 Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (at ambient tempe
ISO 9618:1996 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (
ISO 13589:1998 Aerospace - Nuts, bihexagonal, self-locking, with counterbore and MJ threads, classifications: 1100 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/425 °C, 1210 MPa (at ambient temperature)/
ISO 10096:1997 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 °C, 600 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/315 °C, 600 MPa
ISO 2719:2016/Amd 1:2021 Determination of flash point — Pensky-Martens closed cup method — Amendment 1: Thermometers correction
ISO 4795:1996 Glass for thermometer bulbs
ISO 3205:1976 Preferred test temperatures
ISO 3205:1976/Amd 1:1976 Preferred test temperatures
ISO 6152:1982 Thermometers for use with alcoholometers and alcohol hydrometers
ISO 1:1975 Standard reference temperature for industrial length measurements
ISO/R 1:1951 STANDARD REFERENCE TEMPERATURE FOR INDUSTRIAL LENGTH MEASUREMENTS

British Standards Institution (BSI), temperature crosslinking degree

BS ISO 10146:2019 Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX). Effect of time and temperature on expected strength
BS EN ISO 13916:2017 Welding. Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
BS EN 1252-2:2001 Cryogenic vessels - Materials - Toughness requirements for temperatures between -80 °C and -20 °C
BS ISO 14322:2012 Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
BS EN ISO 10147:2012 Pipes and fittings made of crosslinked polyethylene (PE-X). Estimation of the degree of crosslinking by determination of the gel content
BS EN ISO 13916:1997 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
BS ISO 10147+A1:2005 Pipes and fittings made of crosslinked polyethylene (PE-X). Estimation of the degree of crosslinking by determination of the gel content
BS ISO 14322:2018 Tracked Changes. Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)
BS ISO 9618:2016 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425
BS EN 60751:2008 Industrial platinum resistance thermometers and platinum temperature sensors
BS ISO 20368:2017 Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by Fourier Transform Infrared (FTIR) Spectroscopy
BS 1041-2.2:1989 Code for temperature measurement - Expansion thermometers - Guide to selection and use of dial-type expansion thermometers
BS 1041-2.2:1990 Code for temperature measurement. Expansion thermometers. Guide to selection and use of dial-type expansion thermometers
BS 1041-2.1:1985 Code for temperature measurement - Expansion thermometers - Guide to selection and use of liquid-in-glass thermometers
BS EN ISO 21028-2:2018 Cryogenic vessels. Toughness requirements for materials at cryogenic temperature - Temperatures between -80 degrees C and -20 degrees C
BS EN ISO 21028-1:2016 Cryogenic vessels. Toughness requirements for materials at cryogenic temperature. Temperatures below -80 C
BS EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
BS EN 14597:2005 Temperature control devices and temperature limiters for heat generating systems
BS EN 1252-1:1998 Cryogenic vessels. Materials. Toughness requirements for temperatures below -80C
BS EN 13190:2001(2004) Dial thermometers
BS EN 13190:2002 Dial thermometers
BS EN 13190:2001 Dial thermometers
22/30454354 DC BS EN 13486. Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods. Periodic verification
19/30382658 DC BS EN IEC 60751. Industrial platinum resistance thermometers and platinum temperature sensors
19/30406424 DC BS EN IEC 60751. Industrial platinum resistance thermometers and platinum temperature sensors
BS EN IEC 60751:2022 Tracked Changes. Industrial platinum resistance thermometers and platinum temperature sensors
BS 1041 Sec.2.1:1985 Temperature measurement. Expansion thermometers. Guide to selection and use of liquid-in-glass thermometers

Professional Standard - Aviation, temperature crosslinking degree

HB 6658-1992 Test method for degree of crosslinking of lightly crosslinked plexiglass

Korean Agency for Technology and Standards (KATS), temperature crosslinking degree

KS M ISO 10146:2004 Crosslinked polyethylene(PE-X) pipes－Effect of time and temperature of the expected strength
KS M ISO 10146:2019 Crosslinked polyethylene(PE-X) pipes — Effect of time and temperature on the expected strength
KS C 0076-1990 Methods for determining distribution temperature and colour temperature or correlated co1our temperature of light sources
KS W ISO 8279:2007 Aerospace-Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications:600 MPa(at ambient temperature)/120 ℃,600 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/425 ℃, 1 100 MPa(at ambient temperature)/23
KS W 0935-2018 Aerospace — Nuts, hexagonal, slotted(castellated), normal height, normal across flats, with MJ threads, classifications: 600 MPa(at ambient temperature)/120 ℃, 600 MPa(at ambient temperature)/ 235 ℃,
KS V 0512-1986(2021) Sea water temperature for designing marine heat exchangers
KS A 0514-2005(2020) Method of temperature measurement by filled-system thermometers and bimetaillic thermometers
KS B ISO 13916-2003(2008) Welding－Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
KS M ISO 10147:2009 Pipes and fittings made of crosslinked polyethylene (PE-X)- Estimation of the degree of crosslinking by determination of the gel content
KS M ISO 10147:2016 Pipes and fittings made of crosslinked polyethylene (PE-X)－ Estimation of the degree of crosslinking by determination of the gel content
KS B ISO 13916:2003 Welding-Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
KS A 0514-1994 Method of temperature measurement by filled-system thermometers and bimetallic thermometers
KS B ISO 13916:2013 Welding－Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
KS W ISO 9199:2020 Aerospace — Nuts, bihexagonal, selflocking, MJ threads,classifications: 1 100 MPa (at ambient temperature)/425 °C, 1 100MPa (at ambient temperature)/650 °C, 1 210 MPa (at ambient temperature)/425 °C,
KS M ISO 10147-2016(2021) Pipes and fittings made of crosslinked polyethylene (PE-X)－ Estimation of the degree of crosslinking by determination of the gel content
KS W ISO 9618:2007 Aerospace－Nuts, hexagonal, slotted(castellated), reduced height,normal across flats, with MJ threads, classifications：450 MPa (at ambient temperature)/120 ℃,450 MPa (at ambient temperature)/235 ℃,600 MPa (at ambient temperature)/425 ℃,900 MPa (at ambient
KS A 0512-2009(2019) Method of temperature measurement by liquid-in-glass thermometers
KS C IEC PAS 62178-2003(2008) Temperature cycling
KS B 5310-2001(2016) Thermographs
KS B ISO 1771-2007(2022) Enclosed-scale general purpose thermometers
KS V 0512-1986 Sea water temperature for designing marine heat exchangers
KS B 6156-2014 Temperature limiters and thermostats for hot water boilers
KS B 6156-2003 Temperature limiters and thermostats for hot water boilers
KS A 0514-2005 Method of temperature measurement by filled-system thermometers and bimetaillic thermometers
KS C 0076-1990(2017) Methods for determining distribution temperature and colour temperature or correlated co1our temperature of light sources
KS C 1608-1987 Indicating Thermoelectric Thermometers
KS B 5302-1983(2016) Etched-stem liquid-in glass thermometer
KS B 5214-2016(2021) Thermometers with plates
KS B 5310-2001(2021) Thermographs
KS B 5214-1986 Thermometers with plates
KS C 6111-2-2005(2020) Superconductivity－Critical temperature measurement－Critical temperature of Nb-Ti, Nb3Sn, and Bi-system composite superconductors by a magnetic method using an ac susceptometer
KS R 5026-2008 Temperature indicators for automobiles
KS C IEC PAS 62178:2003 Temperature cycling
KS B ISO 4795:2007 Glass for thermometer bulbs
KS B 5214-2016 Thermometers with plates
KS B 5320-2008(2018) Bimetallic thermometers
KS V 7220-2003(2011) Shipbuilding－Thermometer pockets
KS B 5217-1990(2020) Bimetallic thermometers for atmospheric temperature
KS R 5026-1983 Temperature indicators for automobiles
KS B 5320-1985 Bimetallic thermometers
KS B 5217-1983 Bimetallic thermometers for atmospheric temperature
KS C IEC PAS 62161:2002 Steady state temperature humidity bias life test

KR-KS, temperature crosslinking degree

KS M ISO 10146-2019 Crosslinked polyethylene(PE-X) pipes — Effect of time and temperature on the expected strength
KS M ISO 10147-2016 Pipes and fittings made of crosslinked polyethylene (PE-X)－ Estimation of the degree of crosslinking by determination of the gel content
KS W ISO 9199-2020 Aerospace — Nuts, bihexagonal, selflocking, MJ threads,classifications: 1 100 MPa (at ambient temperature)/425 °C, 1 100MPa (at ambient temperature)/650 °C, 1 210 MPa (at ambient temperature)/425 °C,
KS B 5320-2008(2023) Bimetallic thermometers

Group Standards of the People's Republic of China, temperature crosslinking degree

T/CEC 443-2021 Calculation Method of Conductor Temperature of Single Core XLPE Cable
T/QAS 024-2021 Determination of brine temperature by thermometer method
T/ZEIIA 01-2019 Negative temperature coefficient thermal temperature sensor
T/CASME 107-2022 Temperature sensor of ear thermometer
T/CAS 302-2018 Performance technical specification for Multi-connected low ambient temperature air source heat pump air heaters
T/ZZB 1554.2-2020 Long AC submarine cables with cross-linked popyethylene insulation and their accessories for rated voltage of 500kV (Um=550kV)—Part 2: Long AC submarine cables
T/DAWS 0004-2019 Cold chain logistics temperature and humidity control requirements and temperature measurement methods
T/QGCML 1574-2023 High-precision thermometer
T/QGCML 1573-2023 Temperature and humidity collector
T/CSTM 00989-2023 Test method for microwave parameters under high temperature, low temperature, temperature cycling and humidity

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, temperature crosslinking degree

GB/T 34072-2017 Specification of temperature transmitter for internet of things

(U.S.) Ford Automotive Standards, temperature crosslinking degree

FORD FLTM BP 155-01-2006 CROSS-LINK DENSITY OF ELASTOMERS
FORD FLTM EU-BJ 003-02-2001 DETERMINATION OF LOW TEMPERATURE VISCOSITY BROOKFIELD VISCOSIMETER
FORD FLTM BJ 003-2-2001 DETERMINATION OF LOW TEMPERATURE VISCOSITY - BROOKFIELD VISCOSIMETER
FORD FLTM EU-BJ 003-2-2001 DETERMINATION OF LOW TEMPERATURE VISCOSITY BROOKFIELD VISCOSIMETER
FORD ESF-M8G156-B-2000 GASKET, CROSSLINKED POLYETHYLENE FOAM, CLOSED CELL, LOWER DENSITY (Shown on ESF-M8G156-A)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, temperature crosslinking degree

GB/T 18474-2001 Pipes and fittings made of crosslinked polyethylene(PE-X)--Estimation of the degree of crosslinking by determination of the gel content
GB/T 41928-2022 Plastics—Epoxy resins—Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)
GB/T 25857-2010 Low ambient temperature air source multi-connected heat pump(air conditioning) unit
GB/T 25857-2022 Low ambient temperature air source multi-connected heat pump (air conditioner) unit
GB/T 18591-2001 Welding--Guidance on the measurement of preheating temperature,interpass temperature and preheat maintenance temperature
GB/T 13195-1991 Water quality--Determination of water temperature--Thermometer or reversing thermometer method
GB/T 23246-2009 Conductivity-temperature-depth profiler
GB/T 32346.2-2015 Long AC submarine cables with cross-linked polyethylene insulation and their accessoried for rated voltage of 220 kV(U<下标m> = 252 kV).Part 2: Long AC submarine cables
GB/T 41629.2-2022 Long AC submarine cables with cross-linked polyethylene insulation and their accessories for rated voltage of 500 kV(Um=550 kV)—Part 2: Long AC submarine cables
GB/T 28215-2011 Glass for thermometer bulbs
GB/T 31780-2015 Critical temperature measurement.Critical temperature of composite superconductors by a resistance method
GB 8023-1987 Liquid petroleum product viscosity temperature calculation chart
GB/T 8023-1987 Liquid petroleum products--Viscosity--Temperature charts

YU-JUS, temperature crosslinking degree

JUS N.C0.060-1980 Testing ofinsulated conductors and cables. Degree of cross-linking
JUS M.A0.001-1978 Standard reference temperature for industrial length measurements

PL-PKN, temperature crosslinking degree

PN BN 2215-01-1966
PN S13705-1965 Glass thermometers Yeterinarian thermometers
PN S13715-1965 Glass thermometers Laboratórial thermometers
PN BN 2215-02-1966
PN BN 2215-03-1966
PN BN 2215-04-1966
PN M53858-1988 Electric thermometers Connection lines for electrical thermometers
PN C89065-1987 Plastics Determination of the brittleness temperatur? by impact
PN C89076-1974 Plas?ics Determination of stiffness in ?orsion as a function o? temperatur?

NO-SN, temperature crosslinking degree

NS 5508-1978 Thermometers - Thermometer wells for industrial thermometers type C
NS 5509-1978 Thermometers - Glass inserts for industrial thermometers
NS 4487-1983 Preferred test temperatures
NS 5507-1978 Thermometers - Industrial thermometers with glass inserts - V-shaped case

German Institute for Standardization, temperature crosslinking degree

DIN 16895:1996 Crosslinked medium density polyethylene (PE-MDX) pipes - Dimensions
DIN 16895:2011-04 Crosslinked medium density polyethylene (PE-MDX) pipes - Dimensions
DIN EN ISO 13916:2018-03 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017); German version EN ISO 13916:2017
DIN EN ISO 13916:1996 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996); German version EN ISO 13916:1996
DIN 16895:2011 Crosslinked medium density polyethylene (PE-MDX) pipes - Dimensions
DIN EN ISO 10147:2013-03 Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content (ISO 10147:2011); German and English version EN ISO 10147:2012
DIN EN 60751:2009 Industrial platinum resistance thermometers and platinum temperature sensors (IEC 60751:2008); German version EN 60751:2008
DIN 58660:1966 Meteorological instruments - Thermometer 370 for psychrometer
DIN 58661:1966 Meteorological instruments - Thermometer 280 for psychrometer
DIN 53017:1993 Viscometry; determination of the temperature coefficient of viscosity of liquids
DIN EN 13486:2022-08 Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Periodic verification; German and English version prEN 13486:2022 / Note: Date of issu...
DIN 16160:1990-11 Thermometers; concepts
DIN 16160:1990 Thermometers; concepts
DIN 472-2017:2017-06 Plastic piping systems for warm water floor heating systems and radiator pipe connecting - Crosslinked polyethylene of medium density (PE-MDX)
DIN 4724:2020 Plastic piping systems for warm water floor heating systems and radiator pipe connecting - Crosslinked polyethylene of medium density (PE-MDX)
DIN EN 12470-2:2009-11 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers; German version EN 12470-2:2000+A1:2009 / Note: DIN EN 12470-2 (2001-02) remains valid alongside this standard until 2010-03-21.
DIN EN 14597:2015-02 Temperature control devices and temperature limiters for heat generating systems; German version EN 14597:2012
DIN 43767:1986-03 Measurement and control; electrical temperature sensors; welded-stem thermometers / Note: To be replaced by DIN 43735-3 (2005-04).
DIN 53017:1993-11 Viscometry; determination of the temperature coefficient of viscosity of liquids
DIN 43772 Bb.1:2000 Control technology - Protective tubes and extention tubes for liquid-in-glass thermometers, dial thermometers, thermocouples and resistance thermometers - General review; assignment protective tube/thermometer
DIN 12789:1972 Laboratory glassware; Beckmann thermometers, adjustable range enclosed scale thermometers
DIN 16196:2015-03 Dial indicating thermometers with electrical limit contact devices - Filled system thermometers and bimetallic thermometers
DIN 16894:2011 Pipes of crosslinked medium density polyethylene (PE-MDX) - General quality requirements and testing
DIN 43767:1986 Measurement and control; electrical temperature sensors; welded-stem thermometers
DIN EN IEC 60751:2023-06 Industrial platinum resistance thermometers and platinum temperature sensors (IEC 60751:2022); German version EN IEC 60751:2022 / Note: DIN EN 60751 (2009-05) remains valid alongside this standard until 2025-03-03.
DIN 75575:1992 Temperatur gauges for motor vehicles
DIN EN 13190:2002-03 Dial thermometers; German version EN 13190:2001
DIN 16196:1991 Dial indicating thermometers with electrical limit contact devices; filled system thermometers and bimetallic-thermometers
DIN EN ISO 13916:2018 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017); German version EN ISO 13916:2017
DIN 16196:2015 Dial indicating thermometers with electrical limit contact devices - Filled system thermometers and bimetallic thermometers
DIN 16196:2013 Dial indicating thermometers with electrical limit contact devices - Filled system thermometers and bimetallic thermometers
DIN 43771:1989-12 Measurement and control; electrical temperature sensors; fast response thermometers / Note: To be replaced by DIN 43735-3 (2005-04).
DIN 16894:1997 Pipes of crosslinked medium density polyethylene (PE-MDX) - General quality requirements and testing
DIN 16894:2011-04 Pipes of crosslinked medium density polyethylene (PE-MDX) - General quality requirements and testing

AT-ON, temperature crosslinking degree

ONORM EN 579-1993 Plastics piping Systems - Crosslinked Polyethylene (PE-X) pipes - Determination of degree of crosslinking by solvent extraction
ONORM EN ISO 13916:1996 Welding-Guidance on the measurement of preheating trmperature,interpass temperature and preheat maintenance temperature
ONORM M 5820-1965 Die Auswahl der Begriffe und deren Erkl?rung erfolgte im Hinblick auf den praktischen Gebrauch von Strahlungspyrometern.

Association Francaise de Normalisation, temperature crosslinking degree

NF T54-087:1993 Plastics piping systems. Crosslinked polyethylene (pe-X) pipes. Determination of degree of crosslinking by solvent extraction.
NF T54-087*NF EN ISO 10147:2013 Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content
NF EN ISO 10147:2013 Tubes et raccords en polyéthylène réticulé (PE-X) - Estimation du degré de réticulation par le mesurage du taux de gel
NF A89-253*NF EN ISO 13916:2018 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
NF EN ISO 13916:2018 Soudage - Mesurage de la température de préchauffage, de la température entre passes et de la température de maintien du préchauffage
NF E18-013:1988 Industrial thermometers. Steam-pressure or liquid-expansion metallic thermometers indicators. Dials.
NF E18-015:1988 Industrial thermometers. Bimetallic thermometers. Characteristics.
NF E18-012:1982 INDUSTRIAL THERMOMETERS. DIAL TYPE METALLIC THERMOMETERS. TERMINOLOGY.
NF S54-042:2006 Thermometers for bath - Temperature indicators - Specifications and marks.
NF A89-253:1996 Welding. Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature.
NF C42-330*NF EN 60751:2008 Industrial platinum resistance thermometers and platinum temperature sensors.
NF B30-105:1972 Determination of annealing point and strain point of glass.
NF EN IEC 60751:2022 Thermomètres à résistance de platine et capteurs thermométriques de platine industriels
NF E18-014:1988 Industrial thermometers. Temperature recorders. Vapor pressure, liquid-expansion or bimetallic themometers.
NF C42-330*NF EN IEC 60751:2022 Industrial platinum resistance thermometers and platinum temperature sensors
NF EN 12470-2+A1:2009 Thermomètres médicaux - Partie 2 : thermomètres à changement de phase (matrice à points)
NF EN 12470-2/IN1:2009 Thermomètres médicaux - Partie 2 : thermomètres à changement de phase (matrice à points)
NF P52-702:2006 Temperature control devices and temperature limiters for heat generating systems.
NF P52-702*NF EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
NF E18-010*NF EN 13190:2002 Dial thermometers
NF EN 13190:2002 Thermomètres à cadran
NF E15-100:2000 Industrial pressure gauges and thermometers - Metallic indicator pressure gauges and thermometers - Pressure gauges and thermometers with control function

未注明发布机构, temperature crosslinking degree

BS EN 579:1994(1999) Plastics piping systems — Crosslinked polyethylene (PE - X) pipes — Determination of degree of crosslinking by solvent extraction
BS 1041-2.2:1989(2000) Temperature measurement — Part 2 : Expansion thermometers — Section 2.2 Guide to selection and use of dial - type expansion thermometers
BS 1041-2.1:1985(2007) Temperature measurement — Part 2 : Expansion thermometers — Section 2.1 Guide to selection and use of liquid - in - glass thermometers

European Committee for Standardization (CEN), temperature crosslinking degree

EN ISO/TS 17426:2016 Intelligent transport systems - Cooperative systems - Contextual speeds
prEN 579-1993 Plastics piping systems; crosslinked polyethylene (PE-X) pipes; determination of degree of crosslinking by solvent extraction
prEN 579-1991 Plastics and piping systems; crosslinked polyethylene (PE-X) pipes; determination of degree of crosslinking by solvent extraction
EN ISO 13916:1996 Welding - Guidance on the Measurement of Preheating Temperature, Interpass Temperature and Preheat Maintenance Temperature ISO 13916: 1996
EN ISO 10147:2012 Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content (ISO 10147:2011)
EN 12470-2:2000+A1:2009 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers
EN 13190:2001 Dial thermometers

CEN - European Committee for Standardization, temperature crosslinking degree

CEN ISO/TS 17426:2016 Intelligent transport systems - Cooperative systems - Contextual speeds
EN ISO 13916:2017 Welding - Measurement of preheating temperature@ interpass temperature and preheat maintenance temperature

American Society for Testing and Materials (ASTM), temperature crosslinking degree

ASTM E667-98(2003) Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers
ASTM E667-98 Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers
ASTM E667-98(2009) Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers
ASTM D2493-95a Standard Viscosity-Temperature Chart for Asphalts
ASTM D2493-01e1 Standard Viscosity-Temperature Chart for Asphalts
ASTM D2493-01 Standard Viscosity-Temperature Chart for Asphalts
ASTM E1112-00(2006) Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature
ASTM E1112-00(2011) Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature

RO-ASRO, temperature crosslinking degree

STAS 8374/2-1982 Technical thermometers TUBULAR THERMOMETERS
STAS 8374/2-1974 Thermometers for industrial use TUBULAR THERMOMETERS
STAS 8374/1-1969
STAS 8375/2-1969
STAS 8375/1-1969
STAS 1033-1968
STAS 8375/3-1969
STAS 6507-1978 FISH AND FISH PRODUCTS Determination of length,mass and temperature

RU-GOST R, temperature crosslinking degree

GOST R 57687-2017 Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
GOST 9249-1959 Normal temperature
GOST 21727-1976 Water. Viscosity of water at 20 °C
GOST 12.4.138-1984 Occupational safety standards system. Protective leather shoes. Method for determination of strongth decrease coefficient of under parts attachment against elevated temperatures
GOST R ISO 651-1994 Solid-stem calorimeter thermometers
GOST R ISO 652-1994 Enclosed-scale calorimeter thermometers
GOST 4.156-1985 System of product-quality indices. Filled-system thermometers. Solid-expansion and bimetal thermometers and themperature controllers. Nomenclature of indices
GOST 8.312-1978 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring instruments of variable temperature of water medium in the range of pulsation amplitudes of temperatures within 0,01 -
GOST R 50118-1992 Long enclosed scale termometers for precision use
GOST 14894-1969 Thermoelectric standard 2-class and general industry use thermometers for low temperatures. Methods and means of verification

IT-UNI, temperature crosslinking degree

Japanese Industrial Standards Committee (JISC), temperature crosslinking degree

JIS C 1211-2:2017 Alternating-current watt-hour meters (electromechanical meters for direct connection) -- Part 2: Measuring instruments used in transaction or certification
JIS Z 8707:1992 Method of temperature measurement by filled-system thermometers and bimetallic thermometers
JIS K 7148-1:2015 Plastics -- Epoxy resins -- Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
JIS Z 3703:2004 Welding -- Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
JIS F 0502:1978 Sea water temperature for designing marine heat exchangers
JIS Z 8725:1987 Methods for determining distribution temperature and colour temperature or correlated colour temperature of light sources
JIS K 7148-1:2022 Plastics -- Epoxy resins -- Part 1: Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)
JIS K 6795:1998 Crosslinked polyethylene (PE-X) pipes -- Effect of time and temperature on the expected strength
JIS Z 8705:1992 Method of temperature measurement by liquid-in-glass thermometers
JIS B 8413:1994 Temperature limiters and thermostats for hot water boilers
JIS F 0502:2006 Shipbuilding -- Sea water temperature for designing marine heat exchangers
JIS B 7414:2018 Glass thermometers
JIS D 5605:1979 Temperature indicators for automobiles
JIS B 7528:1979 Mercury filled thermometers
JIS Z 8705 AMD 1:2006 Method of temperature measurement by liquid-in-glass thermometers (Amendment 1)
JIS F 7210:1996 Shipbuilding -- Thermometer pockets
JIS C 1604:2013 Platinum resistance thermometers
JIS B 7542:1979 Bimetallic thermometers
JIS H 7851:2005 Testing method for heat resistance under temperature gradient

Building Officials and Code Administrators International(U.S.), temperature crosslinking degree

BOCA APPENDIX A NMC COMM-1993 Degree Day and Temperature Table
BOCA APPENDIX A NECC-1993 Degree Day and Design Temperature Table
BOCA APPENDIX A NMC-1993 Degree Day and Design Temperature Table
BOCA APPENDIX D NPC COMM-1993 Degree Day and Design Temperature Table
BOCA APPENDIX B NMC-1990 Degree Day and Design Temperature Table Seventh Edition
BOCA APPENDIX B NECC-1990 Degree Day and Design Temperature Table and Solar Factors

CZ-CSN, temperature crosslinking degree

CSN ON 02 7215-1963
CSN 42 0956-1989 Steel for higher temperatures for casting. Grades
CSN 66 6653-1981 Determination of deformation temperature, liberating temperature and melting point
CSN 65 0321-1968 Ignition temperature
CSN ON 69 0109-1962
CSN 25 8146-1966 Thermometers for determination of Engler viscosity
CSN 85 0538-1964 Veterinary thermometers
CSN 25 8157-1966
CSN 20 0327-1971 Accuracy of co-ordinate boring machines
CSN ISO 2921:1994 Rubber, vulcanized. Determination of low temperature characteristics. Temperature-retraction procedure (TR test)
CSN 25 8160-1966 Thermometers for determination of viscosity by means of Vogel-Ossag viscometer
CSN 25 8201-1985 Pressure-type thermometers
CSN 65 0310-1981 Determinatisn of melting tem pera ture ange
CSN 99 3141-1988 Technical glass thermometers for temperature range from -90 to +600 φC. Methods of verification
CSN 25 8211-1985 Dials and scales of pressure-type thermometers. Technical requirements

American National Standards Institute （ANSI), temperature crosslinking degree

ANSI/ATIS 0600010-2014 Temperature, Humidity, & Altitude Standards
ANSI/TIA/EIA 455-162A-1999 Fiber Optic Cable Temperature-Humidity Cycling
ANSI B89.6.2-1973 Temperature and Humidity Environment for Dimensional Measurement
ANSI/ASME B89.6.2-1973 Temperature and Humidity Environment for Dimensional Measurement
ANSI/TIA-455-162A-1999 Fiber Optic Cable Temperature-Humidity Cycling

Professional Standard - Aerospace, temperature crosslinking degree

QJ 1616-1989 Method for Determination of Crosslinking Density of Composite Solid Propellant

HU-MSZT, temperature crosslinking degree

Standard Association of Australia （SAA）, temperature crosslinking degree

AS ISO 13916:2018 Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
AS EN 12470.4:2004 Clinical thermometers - Performance of electrical thermometers for continuous measurement
AS 4032.2:2005(R2015)/Amdt 2:2009
AS 4032.2:2005(R2015)/Amdt 1:2006
AS 4032.2:2005(R2015)

GOSTR, temperature crosslinking degree

GOST R 58353-2019 Ships heat exchangers. Cooling sea water temperature for designing
GOST R 59112-2020 Pipes and fittings made of crosslinked polyethylene (PE-X). Estimation of the degree of crosslinking by determination of the gel content

Anhui Provincial Standard of the People's Republic of China, temperature crosslinking degree

DB34/T 2427-2015 General technical specifications for temperature sensors used in agricultural Internet of things

CL-INN, temperature crosslinking degree

Taiwan Provincial Standard of the People's Republic of China, temperature crosslinking degree

CNS 10405-1983 Degree Fahrenheit-Degree Celcius Conversion Tables
CNS 14399-2000 Thermal links (thermal cutoffs)
CNS 9059-1982 Thermographs
CNS 35-1947 Standard Testing Temperature

National Metrological Technical Specifications of the People's Republic of China, temperature crosslinking degree

JJF 1632-2017 Calibration Specification for Temperature Parameters of Temperature Switches
JJF 1170-2007 Calibration Specification for Cryogenic Resistance Thermometers with Negative Sensitivity
JJF 1107-2003 Calibration Specification for Infrared Thermometers for Measurement of Human Temperature

IN-BIS, temperature crosslinking degree

Professional Standard - Petroleum, temperature crosslinking degree

SY/T 5825-1993 Mechanical downhole thermometer temperature test
SY/T 5825-2014 Procedures of temperature test with down-hole electronic thermometers
SY/T 5825-2007 Procedures of temperature test by a electronic down-hole thermometer

Association of German Mechanical Engineers, temperature crosslinking degree

VDI/VDE 3511 Blatt 2-1996 Temperature measurement in industry - Contact thermometers
VDI/VDE 3511 Blatt 5-1994 Temperature measurement in industry - Installation of thermometers
VDI/VDE 3511 Blatt 4.4-2005 Temperature measurement in industry - Radiation thermometry - Calibration of radiation thermometers
VDI/VDE 3512 Blatt 2-2017 Temperature measurement for building automation - Temperature sensors, temperature sensing elements and their measurement parameters
VDI/VDE 3512 Blatt 2-2009 Temperature measurements for building automation - Temperatur sensors, temperature sensing elements and their measurements parameters
VDI/VDE 3511 Blatt 4.2-2002 Temperature measurement in industry - Maintenance of the specification for radiation thermometers
VDI/VDE 3511 Blatt 4.5-2015 Temperature measurement in industry - Radiation thermometry - Practical application of radiation thermometers
VDI/VDE 3511 Blatt 1-1996 Temperature measurement in industry - Principles and special methods of temperature measurement
VDI/VDE 3512 Blatt 4-2009 Temperature measurements for building automation - Testing of temperature sensors
VDI/VDE 3512 Blatt 3-2009 Temperature measurements for building automation - Installation of temperature sensors
VDI/VDE 3512 Blatt 4-2017 Temperature measurement for building automation - Testing of temperature sensors
VDI/VDE 3511 Blatt 4-2011 Temperature measurement in industry - Radiation thermometry
VDI/VDE 3511 Blatt 4.2-2014 Temperature measurement in industry - Radiation thermometry - Maintenance and intended operation of radiation thermometers

Professional Standard - Textile, temperature crosslinking degree

FZ/T 01080-2000 Determination of the degree of crosslinkage for resin-finished fabrics.Dyeing method
FZ/T 01080-2009 Testing method for the degree of crosslinkage for resin-finished fabrics-Dyeing method

Institute of Electrical and Electronics Engineers (IEEE), temperature crosslinking degree

IEEE P2889/D0.04, July 2021 IEEE Draft Guide on the Definition of Incident Power Density to Correlate Surface Temperature Elevation
IEEE P2889/D0.03, May 2021 IEEE Draft Guide on the Definition of Incident Power Density to Correlate Surface Temperature Elevation

Danish Standards Foundation, temperature crosslinking degree

DS/EN ISO 13916:1997 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
DS/EN ISO 10147:2013 Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content
DS/EN 60751:2008 Industrial platinum resistance thermometers and platinum temperature sensors
DS/EN 13190:2002 Dial thermometers
DS/EN 12470-2+A1:2009 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers
DS/EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
DS/ISO 1:1980 Standard reference temperature for industrial length measurements

ES-UNE, temperature crosslinking degree

UNE-EN ISO 13916:2018 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017)
UNE-EN IEC 60751:2022 Industrial platinum resistance thermometers and platinum temperature sensors (Endorsed by Asociación Española de Normalización in April of 2022.)
UNE-EN 60751:2008 Industrial platinum resistance thermometers and platinum temperature sensors (Endorsed by AENOR in February of 2009.)
UNE-EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018)

National Metrological Verification Regulations of the People's Republic of China, temperature crosslinking degree

JJG 330-2005 Mechanical Bathythermographs
JJG 2030-1989 Verification Scheme of Measuring Instruments for Colour Temperature (Distribution Temperature)
JJG 364-1994 Surface Thermometer
JJG 288-2005 Deep Sea Reversing Thermometers
JJG 330-1983 Verification Regulation of Mechanical Bathythermograph

Professional Standard - Chemical Industry, temperature crosslinking degree

HG/T 2875-1997 Cellular material for rubber-plastic shoes-Determination of imtrinsic value of crosslink density
HG/T 2875-2023 Test method for characteristic value of cross-linking density of microporous materials in rubber and plastic shoes
HG/T 2058.1~2058.2-2016 Glass-Lined Thermometer Holders and Glass-Lined Baffled Thermometer Holders (2016)

Lithuanian Standards Office , temperature crosslinking degree

LST EN ISO 13916:1998 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996)
LST EN 13190-2002 Dial thermometers
LST EN 12470-2-2002+A1-2009 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers
LST EN ISO 10147:2013 Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content (ISO 10147:2011)
LST EN 14597-2012 Temperature control devices and temperature limiters for heat generating systems
LST EN 60751-2008 Industrial platinum resistance thermometers and platinum temperature sensors (IEC 60751:2008)

AENOR, temperature crosslinking degree

UNE-EN ISO 13916:1996 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996)
UNE-EN 13190:2002 Dial thermometers.
UNE-EN 12470-2:2001+A1:2009 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers
UNE-EN ISO 10147:2014 Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content (ISO 10147:2011)
UNE 7522:1997 PREFERRED TEST TEMPERATURES.
UNE-EN 14597:2014 Temperature control devices and temperature limiters for heat generating systems

Professional Standard - Ocean, temperature crosslinking degree

HY/T 036-1994 Integrated measurement system for temperature, salinity and depth
HY/T 007-1992 upside down thermometer

Professional Standard - Machinery, temperature crosslinking degree

JB/T 6862-2014 Thermohygrograph
JB/T 6862-1993 Hygrometer
JB/T 9262-1999 Liquid-in-glass industrial thermometers and laboratorial thermometers
JB/T 9240-1999 Teo-colour thermometer
JB/T 2851-1992 Electric resistance furnace
JB/T 6102.1-1999 Combined punching and shearing machine Precision
JB/T 8803-2015 Bimetallic thermometers
JB/T 8803-1998 Bimetallic thermometer

FI-SFS, temperature crosslinking degree

SFS 3299-1979

International Electrotechnical Commission (IEC), temperature crosslinking degree

IEC PAS 62178:2000 Temperature cycling
IEC 60751:2008 Industrial platinium resistance thermometer and platinum temperature sensors
IEC 60751:2022 Industrial platinum resistance thermometers and platinum temperature sensors
IEC 65B/622/DTS:2007 IEC 62492-1: Radiation thermometers - Part 1: Specifications for radiation thermometers
IEC PAS 62177:2000 Highly-accelerated temperature and humidity stress test (HAST)

American Society of Mechanical Engineers (ASME), temperature crosslinking degree

ASME PTC 19.3-1961 Temperature Measurement
ASME PTC 19.3-1974(R2004) Temperature Measurement
ASME PTC 19.3TW-2010 Thermowells
ASME B89.6.2-1973 Temperature and Humidity Environment for Dimensional Measurement
ASME STP-PT-087-2018 Yield Strength Values up to Maximum Temperature Design

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, temperature crosslinking degree

JEDEC JESD22-A104E-2014 Temperature Cycling
JEDEC JESD22-A104C-2005 Temperature Cycling
JEDEC JESD22-A104F-2020 Temperature Cycling
JEDEC JESD22-A101-B-1997 Steady-State Temperature Humidity Bias Life Test
JEDEC JESD22-A110E-2015 Highly Accelerated Temperature and Humidity Stress Test (HAST)
JEDEC JESD22-A110C-2009 Highly Accelerated Temperature and Humidity Stress Test (HAST)
JEDEC JESD22-A110D-2010 Highly Accelerated Temperature and Humidity Stress Test (HAST)

Professional Standard - Meteorology, temperature crosslinking degree

QX/T 32-2005 Temperature grads automatic measuring instrument
QX/T 28-2004 Bimetallic thermograph

API - American Petroleum Institute, temperature crosslinking degree

API TR 6AF1-1998 Technical Report on Temperature Derating on API Flanges under Combination of Loading (Second Edition)

Military Standards (MIL-STD), temperature crosslinking degree

DOD A-A-51588-1986 WET GLOBE TEMPERATURE KIT (DIAL THERMOMETER TYPE, MECHANICAL)
DOD A-A-51709-1986 THERMOMETER, CLINICAL, HUMAN
DOD A-A-53608-1988 HYDROMETERS, GRADUATED SCALE (WITH THERMOMETER, API GRAVITY)

European Committee for Electrotechnical Standardization（CENELEC）, temperature crosslinking degree

EN 60751:2008 Industrial platinum resistance thermometers and platinum temperature sensors
EN IEC 60751:2022 Industrial platinum resistance thermometers and platinum temperature sensors

CENELEC - European Committee for Electrotechnical Standardization, temperature crosslinking degree

EN 60751:1995 Industrial Platinum Resistance Thermometer Sensors (Incorporates Amendment A2: 1995)
EN 61358:1996 Acceptance Inspection for Direct Connected Alternating Current Static Watt-Hour Meters for Active Energy (Classes 1 and 2)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., temperature crosslinking degree

ASHRAE AT-01-1-4-2001 Radiant Panel Surface Temperature Over a Range of Ambient Temperatures
ASHRAE 3763-1994 Predicting the Temperature@ Humidity@ Pressure@ and/or Density Effects on Velocity Instrumentation
ASHRAE QC-06-008-2006 Transient Temperature Measurements and Characteristics for Temperature Sensors and Energy Wheels
ASHRAE 3987-1996 Maintaining Temperature and Humidity in Non-Humidity-Generating Spaces

Professional Standard - Petrochemical Industry, temperature crosslinking degree

SH/T 0732-2004 Standard test method for low temperature, low shear rate, viscosity/temperature dependence of lubricating oils using a temperature-scanning technique

中华人民共和国环境保护部, temperature crosslinking degree

GB 13195-1991 Water quality-Determination of water tecuperature-Thermometer or reverging thermometer method

ESDU - Engineering Sciences Data Unit, temperature crosslinking degree

ESDU 06019-2007 Temperature measurement: resistance thermometry.
ESDU 89026-1989 Temperatures in plates subjected to a sudden increase in recovery temperature.
ESDU 02006-2002 Temperature measurement: techniques.
ESDU 89023-1989 Temperatures in plates subjected to a recovery temperature varying linearly with time.

Indonesia Standards, temperature crosslinking degree

SNI 09-4093-1996 Temperature indicators for motor vehicles
SNI 19-1141-1989 Temperature, Test method
SNI 19-6045-1999 Suggested test temperature
SNI 7644-2010 Spatial database oceanographic temperature, salinity, dissolved oxygen, pH, turbidity, and brightness

Underwriters Laboratories (UL), temperature crosslinking degree

UL 2333-2001 Infrared thermometers

Society of Automotive Engineers (SAE), temperature crosslinking degree

SAE AS413A-1954 TEMPERATURE INDICATOR
SAE AS413-1948 TEMPERATURE INDICATOR
SAE AMS3193D-2011 Silicone Rubber Sponge, Closed Cell, Medium, Extreme Low Temperature
SAE AMS3193E-2014 Silicone Rubber Sponge Closed Cell, Medium, Extreme Low Temperature
SAE AS428-1966 Exhaust Gas Temperature Instruments
SAE AS428-2008 Exhaust Gas Temperature Instruments

Professional Standard - Education, temperature crosslinking degree

JY/T 0418-2010 Demonstration thermometer
JY 42-1979 thermal thermometer

Professional Standard - Aviation Industry, temperature crosslinking degree

Q/HBm 103-1993 Temperature Controller

BE-NBN, temperature crosslinking degree

SAE - SAE International, temperature crosslinking degree

SAE AS81044/13-2000 Wire@ Electric@ Crosslinked Polyalkene Insulated@ Silver-Coated High Strength Copper Alloy@ Light Weight@ 600-Volt@ 150 Degrees C
SAE AS428-1996 Exhaust Gas Temperature Instruments

Defense Logistics Agency, temperature crosslinking degree

DLA MS28034 REV B VALID NOTICE 1-2012 Bulbs, Temperature, Electrical Resistance (-70 Deg. C TO +300 Deg. C)
DLA MS27188 VALID NOTICE 3-2005 PROBE, TOTAL TEMPERATURE, DEICEABLE
DLA MS27188 NOTICE 2-1999 PROBE, TOTAL TEMPERATURE, DEICEABLE
DLA MS27188-1962 PROBE, TOTAL TEMPERATURE, DEICEABLE
DLA QPL-7990-2010 Transmitter, Temperature, Electrical Resistance, -70 Degrees to +300 Degrees C
DLA QPL-7990-2012 Transmitter, Temperature, Electrical Resistance, -70 Degrees to +300 Degrees C
DLA QPL-7990-16-2007 TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE, -70 DEG. TO +300 DEG. C
DLA QPL-7990-16 NOTICE 1-2008 Transmitter, Temperature, Electrical Resistance, -70 Degrees to +300 Degrees C
DLA MIL-DTL-16878/14 B VALID NOTICE 2-2011 Wire, Electrical, Crosslinked, Modified Polyethylene (XLPE) Insulated, 125 Degree C, 600 Volts
DLA MIL-DTL-16878/15 B VALID NOTICE 2-2011 Wire, Electrical, Crosslinked, Modified Polyethylene (XLPE) Insulated, 125 Degree C, 1000 Volts
DLA MIL-DTL-16878/36 A VALID NOTICE 2-2011 Wire, Electrical, Low Smoke, Cross Linked Polyolefin (XLPO) Insulated, 105 Degree C, 600 Volts

CU-NC, temperature crosslinking degree

NC 00-06-1966 Standard reference temperatura for industrial length measurements

PT-IPQ, temperature crosslinking degree

NP 22-1961

SE-SIS, temperature crosslinking degree

SIS 16 14 14-1965 Plastics. Determination of temperature of deflection under load
SIS 14 23 17-1972 High-strength, high-temperature martensitic steel
SIS SS 14 23 17-1979 High-strength, high-temperature martensitic steel
SIS SS-ISO 1:1979 Standard reference temperature for industrial length measurements

United States Navy, temperature crosslinking degree

NAVY MIL-T-2118 C-1990 TRAP, STEAM, ANGLE, THERMOSTATIC

ATIS - Alliance for Telecommunications Industry Solutions, temperature crosslinking degree

0600010-2007 Temperature@ Humidity & Altitude Standards (Pre-Pub)
0600004-2017 Equipment Surface Temperature
0600004-2006 Equipment Surface Temperature

NL-NEN, temperature crosslinking degree

NEN 3057-1970 Plastics. Determlnation of temperature of deflectlon under load and deflection temperature range

European Association of Aerospace Industries, temperature crosslinking degree

AECMA PREN 3646-008-1996 Aerospace Series Connectors, Electrical, Circular, Bayonet Coupling - Operating Temperature 175 Degrees C or 200 Degrees C Continuous Duty Part 008 - Plug Edition: 5E

AR-IRAM, temperature crosslinking degree

IRAM 9020-1962

U.S. Air Force, temperature crosslinking degree

AIR FORCE A-A-59419 A-2005 CALIBRATOR, THERMOMETER
AIR FORCE A-A-59419 A VALID NOTICE 1-2012 Calibrator, Thermometer
AIR FORCE MIL-I-27665 B NOTICE 1-1997 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE -50 DEG. TO +50 DEG. C
AIR FORCE MIL-I-27665 B-1984 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE -50 DEG. TO +50 DEG. C

IEC - International Electrotechnical Commission, temperature crosslinking degree

PAS 62178-2000 Temperature Cycling (Edition 1.0)

GM North America, temperature crosslinking degree

GM GM9329P-2003 High Temperature Humidity Aging
GM GM9131P-1994 Color Changes Due to Temperature or Humidity (Revision B)

Alliance of Telecommunications Industry Solutions （ATIS), temperature crosslinking degree

ATIS 0600004-2006 Equipment Surface Temperature

International Telecommunication Union (ITU), temperature crosslinking degree

ITU-R P.1510-2017 Mean surface temperature

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, temperature crosslinking degree

ITU-R P.1510-1-2017 Mean surface temperature

Professional Standard - Automobile, temperature crosslinking degree

QC/T 13-1992 car thermometer

Professional Standard - Electricity, temperature crosslinking degree

DL/T 1737-2017 Steel String Thermometer

工业和信息化部, temperature crosslinking degree

JB/T 9259-2022 pressure thermometer

International Code Council, temperature crosslinking degree

ICC IPC-1997 APPENDIX D-1997 Degree Day and Design Temperatures for Cities in the United States

(U.S.) Telecommunications Industries Association , temperature crosslinking degree

TIA-455-162-A-1999 FOTP-162 Optical Fiber Cable Temperature Humidity Cycling
TIA-455-162-A-1999(2013) FOTP-162 Optical Fiber Cable Temperature Humidity Cycling

AASHTO - American Association of State Highway and Transportation Officials, temperature crosslinking degree

DIVISION I 10.19-1996 Strength of Connections (Interim 2000)

Professional Standard - Geology, temperature crosslinking degree

DZ/T 0064.3-2021 Groundwater Quality Analysis Methods Part 3: Determination of Temperature Thermometer (Pyrometer) Method

TR-TSE, temperature crosslinking degree

TS 461-1980 ALTERNTATING CURRENT WATTHOUR METERS
TS 186-1965 STANDARD REFERENCE TEMPERATURE FOR INDUSTRIAL LENGTH MEASUREMENTS

GB-REG, temperature crosslinking degree

REG NASA-LLIS-0771--2000 Lessons Learned ?Voltage& Temperature Margin Testing