ZH
RU
ES

Principle of light scattering agent

Principle of light scattering agent, Total:162 items.

In the international standard classification, Principle of light scattering agent involves: Analytical chemistry, Vocabularies, Environmental protection, Test conditions and procedures in general, Crude petroleum, Particle size analysis. Sieving, Pulps, Paper and board, Packaging and distribution of goods in general, Water quality, Petroleum products in general, Fibre optic communications, Radiation measurements, General methods of tests and analysis for food products, Sugar. Sugar products. Starch, Inorganic chemicals, Solar energy engineering, Lubricants, industrial oils and related products, Occupational safety. Industrial hygiene, Testing of metals, Petroleum, petroleum products and natural gas handling equipment, Linear and angular measurements, Nuclear energy engineering, Radiation protection, Electronic tubes, Optoelectronics. Laser equipment, Fuels, Protection against crime, Products of the chemical industry, Non-ferrous metals, Metalliferous minerals, Surface treatment and coating, Raw materials for rubber and plastics, Welding, brazing and soldering, Plastics.

German Institute for Standardization, Principle of light scattering agent

DIN 51418-1:1996 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
DIN 51418-1:2008 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
DIN 51418-2 Bb.1:2000 X-ray spectrometry - X-Ray Emission- and X-ray Fluorescence analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results; additional information and examples of calculation
DIN 51418-2:2015 X-ray spectrometry - X-ray emission and X-ray fluorescence analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results
DIN 51418-2:1996 X-ray spectrometry - X-ray emission- and X-ray fluorescense analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results
DIN 51418-1:2008-08 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
DIN 51396-2:2008-11 Testing of lubricants - Determination of wear elements - Part 2: Wavelength dispersive X-ray fluorescence spectrometry (XRF)
DIN 6800-1:1980 Procedures in dosimetry; principles of photon and electron dosimetry with probe-type detectors
DIN 51391-2:1994 Testing of lubricants; determination of the content of additive elements; analysis by wavelengthdispersive X-ray spectrometry (XRS)
DIN EN 15911:2011-01 Foodstuffs - Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection; German version EN 15911:2010
DIN 51829:2013-03 Petroleum products - Determination of additive and wear elements in greases - Analysis by wavelength dispersive X-ray fluorescence spectrometry
DIN 51399-2:2010-01 Testing of lubricants - Determination of elements content of additives, wear and other contaminations - Part 2: Wavelength dispersive X-ray fluorescence spectrometry (XRF)
DIN 51396-2:1998 Testing of lubricants - Determination of wear elements - Part 2: Analysis by wavelength dispersive X-ray spectrometry (XRS)
DIN 51431-2:2004 Testing of lubricants - Determination of the magnesium content - Part 2: Analysis by wavelength dispersive X-ray spectrometry (XRF)
DIN 51396-2:2008 Testing of lubricants - Determination of wear elements - Part 2: Wavelength dispersive X-ray fluorescence spectrometry (XRF)
DIN 32877-2:2021 Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 2: Design characteristics and metrological characteristics for backward scattering measuring principles
DIN 32877-2:2021-07 Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 2: Design characteristics and metrological characteristics for backward scattering measuring principles
DIN 51391-2:1994-03 Testing of lubricants; determination of the content of additive elements; analysis by wavelengthdispersive X-ray spectrometry (XRS)
DIN 51379-2:1990 Testing of lubricants; determination of molybdenum content of lubricating oils; analysis by wavelength dispersive X-ray spectrometry (XRS)
DIN EN 15911:2011 Foodstuffs - Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection; German version EN 15911:2010
DIN 51363-2:2003 Testing of petroleum products - Determination of phosphorus content of lubricating oils and additives - Part 2: Analysis by wavelength dispersive X-ray spectrometry (XRS)
DIN 51363-2:2003-02 Testing of petroleum products - Determination of phosphorus content of lubricating oils and additives - Part 2: Analysis by wavelength dispersive X-ray spectrometry (XRS)
DIN 51391:2023-09 Testing of lubricants - Determination of the content of additive elements - Wavelengthdispersive X-ray spectrometry analysis (XRS) / Note: Date of issue 2023-07-28*Intended as replacement for DIN 51391-1 (1997-08), DIN 51391-2 (1994-03).

Group Standards of the People's Republic of China, Principle of light scattering agent

T/CAS 719-2023 Technical specification for routine cruise monitoring of urban road dust loading with the principle of light scattering
T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle
T/CNIA 0020-2019 Determination of Impurity Content in Resin Catalysts for the Disproportionation of Chlorosilanes by Inductively Coupled Plasma-Atomic Emission Spectrometry

BELST, Principle of light scattering agent

STB 1935-2009 Grude oil. Determination of organic chloride content by method of wavedispersion X-ray fluorescence spectrometry

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Principle of light scattering agent

GB/T 17606-1998 Determination of sulfur in crude-oil by energy-dispersive X-ray fluorescence spectroscopy
GB/T 17606-2009 Determination of sulfur in crude-oil by energy-dispersive X-ray fluorescence spectrometry
GB/T 23942-2009 Chemical reagent.General rules for inductively coupled plasma atomic emission spectrometry
GB/T 10725-1989 Chemical reagent--General rules for industively coupled plasma atomic emission spectrometry
GB/T 19267.4-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 4:Atomic emission spectrometry
GB/T 19267.4-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 4: Atomic emission spectrometry
GB/T 4325.18-2013 Methods for chemical analysis of molybdenum.Part 18:Determination of vanadium content.N-benzoyl-N-phenylhydroxylamine spectrophotometry and inductively coupled plasma atomic emission spectrometry
GB/T 23524-2009 Test method of spent petrochemical catalyst.Determination of platinum.Inductively coupled plasma atomic emission spectrometry
GB/T 30014-2013 Methods for chemical analysis of spent palladium-carbon.Determination of palladium.Inductively coupled plasma atomic emission spectrometry
GB/T 24916-2010 Surface treatment solution.Determination of metal element contents.Inductively coupled plasma atomic emission spectrometric method

CH-SNV, Principle of light scattering agent

VSM 34651-1937

国家能源局, Principle of light scattering agent

SH/T 0951-2017 Determination of particle size distribution of catalytic cracking catalysts by laser scattering method

European Committee for Standardization (CEN), Principle of light scattering agent

EN 54-7:1988/A1:1988 Components of automatic fire detection systems; Part 7: Point type smoke detectors; Detectors using scattered light, transmitted light or ionization
EN 54-7:1988/prA2:1989 Components of automatic fire detection systems; part 7: point-type smoke detectors; detectors using scattered light, transmitted light or ionization
EN 54-7:1982/AC1:1984 Components of automatic fire detection systems; Part 7: Point type smoke detectors; Detectors using scattered light, transmitted light or ionization
EN 15911:2010 Foodstuffs - Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection

International Organization for Standardization (ISO), Principle of light scattering agent

ISO 9416:2009 Paper - Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)
ISO 9416:2017 Paper - Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)
ISO 4443:2022 Cryolite primarily used for the production of aluminium — Determination of elements — Wavelength-dispersive X-ray fluorescence spectrometric method using pressed powder tablets
ISO 13304-1:2020 Radiological protection — Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation — Part 1: General principles
ISO 5666-2:1983 Water quality; Determination of total mercury by flameless atomic absorption spectrometry; Part 2: Method after pretreatment with ultraviolet radiation
ISO 15616-1:2003 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions

Korean Agency for Technology and Standards (KATS), Principle of light scattering agent

KS M ISO 9416:2022 Paper — Determination of light scattering and absorption coefficients(using Kubelka-Munk theory)
KS M ISO 9416:2016 Paper－Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)
KS M ISO 9416:2011 Paper-Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)
KS A ISO 13320-1:2004 Particle size analysis Laser diffraction methods - Part 1 General principles
KS A ISO 13320-1:2014 Particle size analysis Laser diffraction methods - Part 1 General principles
KS A ISO/ASTM 51956-2012(2022) Practice for use of thermoluminescence dosimetry (TLD) systems for radiation processing
KS A ISO/ASTM 51956-2012(2017) Practice for use of thermoluminescence dosimetry (TLD) systems for radiation processing
KS M 9102-1996(2001) WATER QUALITY-DETERMINATION OF TOTAL MERCURY BY FLAMELESS ATOMIC ABSORPTION SPECTROMETRY(METHOD AFTER PRETREATMENT WITH ULTRAVIOLET RADITION)
KS B ISO 15616-1:2003 Acceptance tests for CO2－laser beam machines for high quality welding and cutting－Part 1：General principles, acceptance conditions

KR-KS, Principle of light scattering agent

KS M ISO 9416-2022 Paper — Determination of light scattering and absorption coefficients(using Kubelka-Munk theory)
KS M ISO 9416-2016 Paper－Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)

AENOR, Principle of light scattering agent

UNE-ISO 9416:2011 Paper - Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)
UNE-EN 15911:2011 Foodstuffs - Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection

American Society for Testing and Materials (ASTM), Principle of light scattering agent

ASTM UOP410-85 Sodium in Catalysts by Flame Emission or Atomic Absorption Spectrophotometry
ASTM ISO/ASTM 51956-02 Standard Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing
ASTM ISO/ASTM 51956-05 Standard Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing
ASTM ISO/ASTM51956-05 Standard Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing
ASTM ISO/ASTM51956-13 Standard Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing
ASTM ISO/ASTM51956-02 Standard Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing
ASTM UOP979-02 Total Chloride in Alumina Supported Catalysts by Wavelength Dispersive X-Ray Fluorescence
ASTM ISO/ASTM 53239-21 Standard Guide for Using Statistical Process Control Principles for Routine Dosimetry in Radiation Processing
ASTM D4927-20 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D4927-05 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components8212;Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D4927-15(2020) Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D4927-15 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components&x2014;Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D7751-11 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
ASTM D4951-14 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM E323-80(2001) Standard Specification for Perforated-Plate Sieves for Testing Purposes
ASTM E3239-21 Standard Guide for Using Statistical Process Control Principles for Routine Dosimetry in Radiation Processing
ASTM D6906-11a Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
ASTM D6906-12 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
ASTM D6906-12a Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
ASTM D6906-12a(2016) Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
ASTM D6906-12a(2021) Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
ASTM D6130-97a(2009) Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D6443-99 Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
ASTM D4927-10 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components8212;Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D4951-02 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D4951-00 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D6130-11 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D5185-18 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma At
ASTM D4927-96 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components8212;Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D4927-01 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components8212;Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D6443-04 Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
ASTM D4927-02 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components8212;Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D6443-04(2010) Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
ASTM D4927-14 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM E3323-21 Standard Test Method for Lipid Quantitation in Liposomal Formulations Using High Performance Liquid Chromatography (HPLC) with an Evaporative Light-Scattering Detector (ELSD)
ASTM D6130-97a(2003) Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D6130-97a Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM E3323-22 Standard Test Method for Lipid Quantitation in Liposomal Formulations Using High Performance Liquid Chromatography (HPLC) with an Evaporative Light-Scattering Detector (ELSD)
ASTM D6443-14 Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
ASTM D4951-06 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D4951-14(2019) Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM D8193-18 Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Principle of light scattering agent

GB/T 33086-2016 Water treatment chemical—Determination of arsenic and mercury—Atomic fluorescence spectrometry

SE-SIS, Principle of light scattering agent

SIS SEN 01 27 60-1971 Symbols for electrical diagrams. Masers and lasers
SIS SS-ISO 5190:1985 Anodizing of aluminium and its alloys - Evaluation of uniformity of appearance of architectural anodic finishes - Determination of diffuse reflectance and specular gloss

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Principle of light scattering agent

ITU-R SM.329-6-1990 Spurious Emissions - Section 1A - Spectrum Engineering and Computer-Aided Principles and Techniques
ITU-R SM.328-7-1990 Spectra and Bandwidth of Emissions - Section 1A - Spectrum Engineering and Computer-Aided Principles and Techniques

Professional Standard - Commodity Inspection, Principle of light scattering agent

SN/T 3187-2012 Determination of sodium,magnesium,aluminium,silicon,calcium,vanadium,iron,nickel,copper,lead,arsenic in crude oil.Wavelength dispersive X-ray fluorescence spectrometry
SN/T 2308-2009 Determination of copper,chromium,arsenic in preservative solutions and treated wood and wood-based products.Atomic absorption spectrometric method
SN/T 2207-2008 Determination of arsenic,calcium,lead content in food additive DL-tartaric acid for import and export.ICP-AES method

Japanese Industrial Standards Committee (JISC), Principle of light scattering agent

JIS Z 8825-1:2001 Particle size analysis -- Laser diffraction methods -- Part 1: General principles
JIS K 2541-4:2003 Crude oil and petroleum products -- Determination of sulfur content Part 4: Energy-dispersive X-ray fluorescence method
JIS K 2541-7:2003 Crude oil and petroleum products -- Determination of sulfur content Part 7: Wavelength-dispersive X-ray fluorescence method

Association Francaise de Normalisation, Principle of light scattering agent

NF EN 54-7:2018 Systèmes de détection et d'alarme incendie - Partie 7 : détecteurs de fumée - Détecteurs ponctuels fonctionnant suivant le principe de la diffusion de la lumière, de la transmission de la lumière ou de l'ionisation
NF EN 15911:2010 Denrées alimentaires - Détermination simultanée de neuf édulcorants par chromatographie liquide haute performance et détection à diffusion de lumière
NF EN 13068-3:2002 Essais non destructifs - Contrôle par radioscopie - Partie 3 : principes généraux de contrôle par radioscopie à l'aide de rayons X et gamma des matériaux métalliques
NF V03-012*NF EN 15911:2010 Foodstuffs - Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection.
NF M60-780-0:2001 Nuclear energy - Measurement of radioactivity in the environment - Bioindicators - Part 0 : general principles.
NF EN 54-12:2015 Systèmes de détection et d'alarme incendie - Partie 12 : détecteurs de fumée - Détecteurs linéaires fonctionnant suivant le principe de la transmission d'un faisceau d'ondes optiques rayonnées
NF EN 16317+A1:2017 Engrais et amendements minéraux basiques - Détermination de l'arsenic par spectrométrie d'émission atomique avec plasma induit par haute fréquence (ICP-AES) après digestion á l'eau régale
NF EN 16317/IN1:2017 Engrais et amendements minéraux basiques - Détermination de l'arsenic par spectrométrie d'émission atomique avec plasma induit par haute fréquence (ICP-AES) après digestion á l'eau régale

BE-NBN, Principle of light scattering agent

NBN S 21-107-1988 Components ol automatic fire detection Systems Part 7 : Point type smoke detectors - Detectors using scattered light, transmitted light or ionization
NBN T 21-306-1984 General methods of test for pigments and extenders - Dermination of relative tinting strength of coloured pigments and relative scattering power of white pigments - Photometric method

British Standards Institution (BSI), Principle of light scattering agent

BS PD IEC/TR 61282-9:2016 Fibre optic communication system design guides. Guidance on polarization mode dispersion measurements and theory
BS ISO 9416:2017 Paper. Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)
BS ISO 9416:2009 Paper - Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)
BS EN 60904-3:2008 Photovoltaic devices — Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
BS EN 60904-3:2016 Photovoltaic devices. Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
BS EN 15911:2010 Foodstuffs. Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection
13/30281229 DC BS ISO 51956. Practice for use of thermoluminescence dosimetry (TLD) systems for radiation processing
BS EN ISO 787-24:1995 General methods of test for pigments and extenders. Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments. Photometric methods

Danish Standards Foundation, Principle of light scattering agent

DS/EN 15911:2011 Foodstuffs - Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection

Lithuanian Standards Office , Principle of light scattering agent

LST EN 15911-2011 Foodstuffs - Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection

Professional Standard - Agriculture, Principle of light scattering agent

GB 10725-1989 General rules for chemical reagent inductively coupled high frequency plasma atomic emission spectrometry
SN/T 1732.22-2018 Pyrotechnic agents for fireworks and firecrackers - Part 22: Qualitative detection of lead, chromium, cadmium, mercury and arsenic by energy-dispersive X-ray fluorescence spectrometry

Universal Oil Products Company (UOP), Principle of light scattering agent

UOP 979-2014 TOTAL CHLORIDE IN ALUMINA SUPPORTED CATALYSTS BY WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE

Professional Standard - Energy, Principle of light scattering agent

NB/SH/T 0880-2014 Standard test method for determination of calcium, chlorine, copper, magnesium ,phosphorus, sulfur, and zinc in unused lubricating oils and additives by wavelength dispersive X-ray fluorescence spectrometry (mathematical correction procedure)

International Electrotechnical Commission (IEC), Principle of light scattering agent

IEC TR 61282-9:2016 Fibre optic communication system design guides - Part 9: Guidance on polarization mode dispersion measurements and theory

Occupational Health Standard of the People's Republic of China, Principle of light scattering agent

GBZ/T(卫生) 249-2014 Method of dose estimation using chromosome translocation with fluorescence in situ hybridization
GBZ/T 249-2014 Method of dose estimation using chromosome translocation with fluorescence in situ hybridization

Professional Standard - Non-ferrous Metal, Principle of light scattering agent

YS/T 617.7-2007 Determination of chemical compositions and physical properties of aluminum powder, magnesium powder and AI-Mg alloy powder.Part 7: Determination of particle size distribution.Laser scatterance/ diffraction method
YS/T 832-2012 Determination of rhodium in spent oxo.Alcohols catalyst.Inductively coupled plasma atomic emission spectrometry

RU-GOST R, Principle of light scattering agent

GOST 21106.0-1975 Oscillator, modulator and regulation tubes anode dissipated power more than 25 W. Method of measurements of electrical parameters. General principles

American National Standards Institute （ANSI), Principle of light scattering agent

ANSI/ASTM E1956:2013 Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing
ANSI/ASTM D6130:1998 Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy

Taiwan Provincial Standard of the People's Republic of China, Principle of light scattering agent

CNS 13059-3-1992 Photovoltaic Devices Part 3`75Measurement Principles for Terrestrial Photovoltaic`6rPV`6sSolar Devices With Reference Spectral Irradiance Data
CNS 13059.3-1992 Photovoltaic Devices Part 3`75Measurement Principles for Terrestrial Photovoltaic`6rPV`6sSolar Devices With Reference Spectral Irradiance Data
CNS 15019-2006 Method of test for determination of additive elements in lubricating oils by inductively coupled plasma atomic emission spectrometry

工业和信息化部, Principle of light scattering agent

YB/T 4850-2020 Determination of direct reduced iron total iron, phosphorus, sulfur, silica, aluminum oxide, calcium oxide and magnesium oxide content by wavelength dispersive X-ray fluorescence spectrometry
HG/T 5747-2020 Determination of nickel, manganese, copper and zinc content in water treatment agent by inductively coupled plasma optical emission spectrometry (ICP-OES) method
YS/T 832-2020 Chemical analysis method for butyl-octyl alcohol spent catalyst Determination of rhodium content by inductively coupled plasma atomic emission spectrometry

Professional Standard - Petrochemical Industry, Principle of light scattering agent

NB/SH/T 0824-2010 Standard test method for determination of additive elements in lubricating oils by inductively coupled plasma atomic emission spectrometry

AT-ON, Principle of light scattering agent

ONORM ISO 5666 Teil.2:1984 Water quality; determination of total mercury by flameless atomic absorption spectrometry; method after pretreatment with ultraviolett radiation

Standard Association of Australia （SAA）, Principle of light scattering agent

AS/NZS 1301.545:2018 Methods of test for pulp and paper, Method 545: Determination of light scattering and absorption coefficients (using Kubelka-Munk theory) (ISO 9416:2017, MOD)

国家市场监督管理总局、中国国家标准化管理委员会, Principle of light scattering agent

GB/T 6609.30-2022 Chemical analysis methods and determination of physical performance of alumina—Part 30: Determination of trace elements—Wavelength dispersive X-ray fluorescence spectrometric method
GB/T 37883-2019 Determination of chromium, cadmium, lead and arsenic in water treatment chemicals—Inductively coupled plasma atomic emission spectrometry
GB/T 36764-2018 Rubber compounding ingredients—Silica, precipitated, hydrated—Determination of heavy metal content by inductively coupled plasma atomic emission spectrometric method
GB/T 23524-2019 Method for chemical analysis of petrochemical spent platinum catalyst—Determination of platinum—Inductively coupled plasma atomic emission spectrometry