ZH
RU
ES

Material Surface Table

Material Surface Table, Total:88 items.

In the international standard classification, Material Surface Table involves: Surface treatment and coating, Rubber and plastics products, Sports equipment and facilities, Acoustics and acoustic measurements, Road engineering, Powder metallurgy, Vocabularies, Piezoelectric and dielectric devices, Medical equipment, Paint coating processes, Welding, brazing and soldering, Analytical chemistry, Elements of buildings, Construction materials, Miscellaneous domestic and commercial equipment, Non-textile floor coverings, Materials for the reinforcement of composites, Insulating materials, Protection against electric shock, Furniture, Cellular materials.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Material Surface Table

GB/T 18839.1-2002 Preparation of steel substrates before application of paints and related products--Surface preparation methods--General principles
GB/T 18839.2-2002 Preparation of steel substrates before application of paints and related products--Surface preparation methods--Abrasive blast-cleaning
GB/T 18839.3-2002 Preparation of steel substrates before application of paints and related products--Surface preparation methods--Hand-and power-tool cleaning
GB/T 18570.2-2001 Preparation of steel substrates before application of paints and related products--Tests for the assessment of surface cleanliness--Laboratory determination of chloride on cleaned surfaces
GB/T 18570.3-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 3:Assessment of dust on steel surface prepared for painting (pressure-sensitive tape method)
GB/T 18570.4-2001 Preparation of steel substrates before application of paints and related products--Tests for the assessment of surface cleanliness--Guidance on the estimation of the probability of condensation prior to paint application
GB/T 18570.5-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 5:Measurement of chloride on surfaces prepared for painting (ion detection tube method)
GB/T 18570.2-2009 Preparation of steel substrates before application of paints and related products.Tests for the assesssment of surface cleanliness.Part 2:Laboratory determination of chloride on cleaned surfaces
GB/T 18570.6-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 6:Extraction of soluble contaminants for analysis.The Bresle method
GB/T 18570.8-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 8:Field method for the refractometric determination of moisture
GB/T 18570.6-2011 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 6:Extraction of soluble contaminants for analysis.The Bresle method
GB/T 8923.1-2011 Preparation of steel substrates before application of paints and related products.Visual assessment of surface cleanliness.Part 1:Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coa
GB/T 8923.3-2009 Preparation of steel substrates before application of paints and related products.Visual assessment of surface cleanliness.Part 3:Preparation grades of welds,edges and other areas with surface imperfections
GB/T 8923.2-2008 Preparation of steel substrates before application of paints and related products.Visual assessment of surface cleanliness.Part 2:Preparation grades of previously coated steel substrates after localized removal of previous coatings
GB/T 18570.9-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 9:Field method for the conductometric determination of water-soluble salts
GB/T 18570.10-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 10:Field method for the titrimetric determination of water-soluble chloride
GB/T 18570.12-2008 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 12:Field method for the titrimetric determination of water-soluble ferrous ions
GB/T 18570.11-2009 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 11:Field method for the turbidimetric determination of water-soluble sulfate
GB/T 8923.4-2013 Preparation of steel substrates before application of paints and related products.Visual assessment of surface cleanliness.Part 4:Initial surface conditions,preparation grades and flash rust grades in connection with high-pressure water jetting
GB/T 16886.19-2022 Biological evaluation of medical devices—Part 19: Physico-chemical, morphological and topographical characterization of materials
GB/T 16886.19-2011 Biological evaluation of medical devices.Part 19: Physico-chemical,morphological and topographical characterization of materials

AGMA - American Gear Manufacturers Association, Material Surface Table

92FTM1-1992 Experimental Characterization of Surface Durability of Materials for Worm Gears

Association Francaise de Normalisation, Material Surface Table

NF P90-131*NF EN 12230:2003 Surfaces for sports areas - Determination of tensile properties of synthetic sports areas
NF P90-100:2008 Surfaces for sports areas - Synthetic material surface-coated athletics tracks and run-up areas - Construction requirements and inspections.
NF A95-321-2:1988 Powder metallurgy. Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 2 : case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen.
NF T54-370-3:2013 Plastics - Decorative solid surfacing materials - Part 3: determination of properties - Solid surface shapes

VDI - Verein Deutscher Ingenieure, Material Surface Table

VDI 2534 Blatt 1-1966 Oberflaechenschutz mit organischen Werkstoffen; Oberflaechenueberzuege mit Folien aus PVC hart (Polyvinylchlorid hart)
VDI 2534 Blatt 2-1972 Oberflaechenschutz mit organischen Werkstoffen; Oberflaechenueberzuege mit Bahnen aus PIB (Polyisobutylen)

European Committee for Standardization (CEN), Material Surface Table

EN ISO 8502-4:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:2017)
EN ISO 8502-4:1999 Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness - Part 4: Guidance on the Estimation of the Probability of Condensation Prior to Paint Application ISO 8502-4:1993
EN 14700:2014 Welding consumables - Welding consumables for hard-facing
EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes
EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022)

German Institute for Standardization, Material Surface Table

DIN EN ISO 8502-4:1999 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:1993); Germa
DIN EN ISO 8502-4:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:2017); Germa
DIN IEC/TS 61994-4-4:2011 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4: Materials - Materials for surface acoustic wave (SAW) devices (IEC/TS 61994-4-4:2010)

British Standards Institution (BSI), Material Surface Table

PD IEC TS 61994-4-4:2018 Tracked Changes. Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection. Glossary. Piezoelectric materials. Single crystal wafers for surface acoustic wave (SAW) devices
BS EN ISO 25178-73:2019 Geometrical product specifications (GPS). Surface texture: Areal - Terms and definitions for surface defects on material measures
BS ISO 13473-3:2002 Characterization of pavement texture by use of surface profiles - Specification and classification of profilometers
BS EN 14700:2014 Welding consumables. Welding consumables for hard-facing
BS EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Determination of properties - Solid surface shapes
PD ISO/TR 14187:2020 Surface chemical analysis. Characterization of nanostructured materials
DD ENV 61111-2002 Matting of insulating material for electrical purposes
BS 8870:2022+A1:2023 Materials for roads. High friction surfacing. Specification

IL-SII, Material Surface Table

S.I.692 Pt.102-1971 TESTING OF CLEANING MATF IALS BASED ON SYNTHETIC SURFACE ACTIVE AGENTS: TEST FOR TYPE OF SURFACE ACTIVE AGENT

Korean Agency for Technology and Standards (KATS), Material Surface Table

KS M ISO 8504-2-2012(2017) Preparation of steel substrates before application of paints and related products－Surface preparation methods－Part 2：Abrasive blast-cleaning
KS M ISO 8504-3-2002(2017) Preparation of steel substrates before application of paints and related products－Surface preparation methods－Part 3：Hand- and power-tool cleaning
KS G 2007-1999(2009) SURFACE MATERIAL FOR PORCELAIN ENAMEL CHALKBOARDS
KS F 4937-2019 Surface finishing material for parking slab
KS L 2524-2006 Textile glass fabrics for surfacing

International Electrotechnical Commission (IEC), Material Surface Table

IEC 49/878/CD:2009 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4: Materials - Materials for Surface Acoustic Wave (SAW) devices
IEC 49/890/DTS:2009 IEC/TS 61994-4-4, Ed. 2: Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4: Materials - Materials for Surface Acoustic Wave (SAW) devices

CZ-CSN, Material Surface Table

CSN 03 8230-1975 Abrasive blasting of surfaces of materials
CSN 72 2623 Cast.3-1977 Facing bricks - perforated C1D Material specification
CSN 72 2623 Cast.1-1977 Solid facing bricks - C1P Material specification
CSN 72 2623 Cast.2-1977 Split facing bricks — CIPd Material specification
CSN 72 2623 Cast.4-1977 Shaped facing bricks (CK1). Material specification
CSN 73 6180-1976 Materials for curing of fresh concrete surfaces

IX-SA, Material Surface Table

AS 509:1972

Japanese Industrial Standards Committee (JISC), Material Surface Table

JIS A 6916:2021 Surface preparation materials for finishing
JIS A 6916:2000 Surface preparation materials for finishing
JIS A 6916:2014 Surface preparation materials for finishing
JIS S 6044:1995 Surface material for porcelain enamel chalkboards
JIS A 6916 AMD 1:2006 Surface preparation materials for finishing (Amendment 1)

Lithuanian Standards Office , Material Surface Table

LST EN 14700-2014 Welding consumables - Welding consumables for hard-facing

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Material Surface Table

GB/T 33498-2017 Surface chemical analysis—Characterization of nanostructured materials

BE-NBN, Material Surface Table

Underwriters Laboratories (UL), Material Surface Table

UL 410-1992 Slip resistance of floor surface materials
UL 410-2006 UL Standard for Safety Slip Resistance of Floor Surface Materials Third Edition

BHMA - Builders Hardware Manufacturers Association Inc., Material Surface Table

A156.18-1993 Materials and Finishes (BHMA 1301)

IEC - International Electrotechnical Commission, Material Surface Table

TS 61994-4-4-2010 Piezoelectric and dielectric devices for frequency control and selection – Glossary – Part 4-4: Materials – Materials for surface acoustic wave (SAW) devices (Edition 2.0)

International Organization for Standardization (ISO), Material Surface Table

ISO/TR 14187:2020 Surface chemical analysis — Characterization of nanostructured materials
ISO 19712-3:2007 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes
ISO 19712-3:2022 Plastics — Decorative solid surfacing materials — Part 3: Determination of properties — Solid surface shapes

AASHTO - American Association of State Highway and Transportation Officials, Material Surface Table

MP 28-2016 Standard Specification for Materials for Micro Surfacing
MP 28-2017 Standard Specification for Materials for Micro Surfacing

International Federation of Trucks and Engines, Material Surface Table

NAVISTAR MPAPS A-40-2015 Case Hardening Ferrous Materials

American National Standards Institute （ANSI), Material Surface Table

ANSI/ICPA SS-1-2001 Performance Standard for Solid Surface Materials

American Society of Civil Engineers (ASCE), Material Surface Table

ASCE GSP 191-2009 Road Pavement Material Characterization and Rehabilitation

US-FCR, Material Surface Table

FCR COE ETN 77-3-1976 SURFACED AREAS MATERIAL UTILIZATION CATALOG (SAMUC)
FCR COE ETN 77-3 SUPPLEMENT 1-1977 SURFACED AREAS MATERIAL UTILIZATION CATALOG (SAMUC)
FCR COE ETN 77-3 SUPPLEMENT 2-1979 SURFACED AREAS MATERIAL UTILIZATION CATALOG (SAMUC)
FCR FED H-08-1 SEC 09050-2004 INTERIOR/EXTERIOR FINISHES, MATERIALS AND FINISH SCHEDULE

Taiwan Provincial Standard of the People's Republic of China, Material Surface Table

CNS 12039-1987 Surface Material for Porcelain Enamel Chalkboards

American Society for Testing and Materials (ASTM), Material Surface Table

ASTM C1126-18 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
ASTM C1126-19 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation

ES-UNE, Material Surface Table

UNE-EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022)