ZH
RU
ES

Features of Density Meter

Features of Density Meter, Total:478 items.

In the international standard classification, Features of Density Meter involves: Linear and angular measurements, Crude petroleum, Coals, Measurement of volume, mass, density, viscosity, Semiconducting materials, Non-ferrous metals, Soil quality. Pedology, Optics and optical measurements, Paper and board, Wood, sawlogs and sawn timber, Wood-based panels, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Textile fibres, Glass, Vacuum technology, Quantities and units, Acoustics and acoustic measurements, Medical equipment, Aerospace electric equipment and systems, Electricity. Magnetism. Electrical and magnetic measurements, Surface treatment and coating, Testing of metals, Electrical accessories, Non-destructive testing, Products of the textile industry, Radiation measurements, Welding, brazing and soldering, Petroleum products in general, Astronomy. Geodesy. Geography, Powder metallurgy, Radiocommunications, Nuclear energy engineering, Electromechanical components for electronic and telecommunications equipment, Gears, Solar energy engineering, Electromagnetic compatibility (EMC), Pipeline components and pipelines, Protection against fire, Measurement of fluid flow, Electrical wires and cables, Rubber, Applications of information technology, Shipbuilding and marine structures in general, Fruits. Vegetables, Reinforced plastics, Analytical chemistry, Electrical engineering in general, Construction materials, Ceramics, Cereals, pulses and derived products, Telecommunication systems, Thermodynamics and temperature measurements, Products of the chemical industry, Metrology and measurement in general, Plastics, Optoelectronics. Laser equipment, Equipment for petroleum and natural gas industries, Fuels, Paints and varnishes, Raw materials for rubber and plastics, Air quality, Bearings, Installations in buildings, Document imaging applications, Magnetic materials, Conducting materials, Rubber and plastics products, Paint ingredients, Cellular materials, Natural gas, Paint coating processes, Galvanic cells and batteries, Standardization. General rules, Environmental testing, Radiation protection.

RO-ASRO, Features of Density Meter

STAS 4384-1968
STAS SR ISO 1880:1994 Instruments for the measurement of surface roughness by the profile method - Contact (stylus) instruments of progressive profile transformation - Profile recording instruments.
STAS 11071/21-1990 Hierarchy of measuring instruments. Block diagram of hierarchy of measuring instrument for thermal neutrons flux density
STAS SR EN 28206-1995 Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics
STAS SR ISO 8503-2:1995 Preparation of steei substrates before application of paints and related products - Surface roughness charactaristics of blast-cleaned steel substrates -
STAS SR ISO 8503-1:1995 Preparation of steel substrates before application of paints and related products -Surface roughness characteristics of blast-cleaned steel substrates
STAS SR ISO 8503-3:1996 Preparation of steel substrates before application of paints and related products -Surface roughness characteristics of blast-cleaned steel substrates -

Group Standards of the People's Republic of China, Features of Density Meter

T/GXAS 010-2018 Determination of Density and Relative Density of Gum Turpentine by Densitometer Method
T/CSTM 00277.1-2022 Evaluation of stability for analytical instruments Part 1: Evaluation based on the precision of standard method
T/CSTM 00277.2-2022 Evaluation of stability for analytical instruments Part 2: Evaluation based on the precision of intra-laboratory determination results

German Institute for Standardization, Features of Density Meter

DIN 2271-2:1976 Pneumatic Length Measurement (Air Gauging); Design Features of Instruments Working in the High Pressure Range
DIN 20609:1993 Lighting of mine locomotives; head lamps; design features, photometric requirements, meters and measurements
DIN 68364:2003-05 Properties of wood species - Density, modulus of elasticity and strength
DIN 60905-3:1985 Tex system; rounding of calculated linear densities
DIN EN ISO 1973:2021-12 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method (ISO 1973:2021); German version EN ISO 1973:2021
DIN 65180:1986 Aerospace; electrical circular connectors, medium and high density, rear release contacts; assembly procedures
DIN 60905-3:1985-12 Tex system; rounding of calculated linear densities
DIN EN 384/A2:2019 Structural timber - Determination of characteristic values of mechanical properties and density; German and English version EN 384:2016+A1:2018/prA2:2019
DIN EN 384:2022-08 Structural timber - Determination of characteristic values of mechanical properties and density; German version EN 384:2016+A2:2022
DIN EN ISO 1973:2020 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method (ISO/DIS 1973:2020); German and English version prEN ISO 1973:2020
DIN EN 175301-801:2007 Detail Specification: High density rectangular connectors, round removable crimp contacts; German version EN 175301-801:2006
DIN 2391-1:1994 Seamless precision steel tubes - Part 1: Dimensions
DIN 103-9:1985-02 ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge dimensions and design features
DIN EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010); German version EN ISO 7759:2010
DIN EN ISO 3274:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996); German version EN ISO 3274:1997
DIN 879-3:1999 Verification of geometrical parameters - Dial indicator for linear measurement - Part 3: With mechanical indication and electrical limit contacts
DIN ISO 3923-2:1987 Metallic powders; determination of apparent density; Scott volumeter method; identical with ISO 3923/2, edition 1981
DIN ETS 300240:1993 Private Telecommunication Network (PTN); signalling at the S-reference point; generic feature key management protocol for the control of supplementary services; English version ETS 300240:1993
DIN 2391-2:1994 Seamless precision steel tubes - Part 2: Technical delivery conditions
DIN EN 384:2019 Structural timber - Determination of characteristic values of mechanical properties and density (includes Amendment :2018)
DIN 2271:2016 Geometrical product specifications (GPS) - Pneumatic length measurement - Characteristics of instruments, requirements, testing
DIN 2271-3:2000 Verification of geometrical parameters - Pneumatic length measurement (air gauging) - Part 3: Characteristics of instruments working in the high-pressure range - requirements, testing
DIN EN 13955:2003-03 Surface active agents - Determination of Krafft-point and solubility of ionic surface active agents; German version EN 13955:2002
DIN EN ISO 1973:2021 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method (ISO 1973:2021); German version EN ISO 1973:2021
DIN EN 384:2016 Structural timber - Determination of characteristic values of mechanical properties and density; German version EN 384:2016
DIN EN 384:2010 Structural timber - Determination of characteristic values of mechanical properties and density; German version EN 384:2010
DIN EN ISO 7971-2:2019-06 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2019); German version EN ISO 7971-2:2019
DIN V VDE V 0603-102:2006 Consumer units and meter panels AC 400 V - Part 102: Particular requirements for Consumer units and meter panels for electronic meters (eHZ)
DIN 53840-2:1983-11 Testing of textiles; determination of parameters for the crimp of textured filament yarns; filament yarns with a linear density exceeding 500 dtex
DIN EN ISO 7971-2:2019 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2019)
DIN 53171:2009-08 Solvents for paints and varnishes - Determination of distillation characteristics (boiling range and boiling temperature as a function of distilled volume)
DIN EN ISO 25178-605:2014-06 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014); German version EN ISO 25178-605:2014
DIN ISO 3923-2:1987-08 Metallic powders; determination of apparent density; Scott volumeter method; identical with ISO 3923/2, edition 1981
DIN EN 2591-407:1999 Aerospace series - Elements of electrical and optical connection; test methods - Part 407: Durability of contact retention system and seals; German version EN 2591-407:1999
DIN 53171:2009 Solvents for paints and varnishes - Determination of distillation characteristics (boiling range and boiling temperature as a function of distilled volume)
DIN 5031-11:2011 Optical radiation physics and illuminating engineering - Part 11: Radiometer for measuring actinic radiant quantities - Terms, characteristics and their classification
DIN ETS 300240:1993-12 Private Telecommunication Network (PTN); signalling at the S-reference point; generic feature key management protocol for the control of supplementary services; English version ETS 300240:1993
DIN EN 3545-004:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 004: Connectors with male contacts - Product standard; German and English version EN 3
DIN EN 3545-003:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 003: Connectors with female contacts - Product standard; German and English version EN

Korean Agency for Technology and Standards (KATS), Features of Density Meter

KS R 1158-2012 Characteristics of measuring instruments for the collision test
KS B 0534-2021 Methods for evaluating performance characteristics of ultrasonic pulse-echo testing systems
KS C 9816-1-5-2020 Specification for radio disturbance and immunity measuring apparatus and methods — Part 1-5: Radio disturbance and immunity measuring apparatus — Specifications and validation procedures for CALTS and
KS C IEC 61034-1:2020 Measurement of smoke density of cables burning under defined conditions — Part 1: Test apparatus
KS D ISO 3923-2:2001 Method for determination of apparent density of metal powers-Scott volumeter method
KS D ISO 3923-2:2013 Method for determination of apparent density of metal powers－Scott volumeter method
KS B ISO 13694:2015 Optics and optical instruments — Lasers and laser-related equipment — Test methods for laser beam power[energy] density distribution
KS B ISO 13694:2006 Optics and optical instruments-Lasers and laser-related equipments-Test methods for laser beam power(energy) density distribution
KS B ISO 7935-2003(2008) Stationary source emissions－Determination of the mass concentration of sulfulr dioxide－Performance characteristics of automated measuring methods
KS I ISO 7935-2006(2016) Stationary source emissions－Determinationof the mass concentration of sulfur dioxide(Performance characteristics of automated measuring methods)
KS B ISO 1224-2-2009(2014) Rolling bearings－Instrument precision bearings－Part 2：Boundary dimensions, tolerances and characteristics of inch series bearings
KS B ISO 1224-1-2009(2014) Rolling bearings－Instrument precision bearings－Part 1：Boundary dimensions, tolerances and characteristics of metric series bearings
KS D ISO 16413:2021 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry — Instrumental requirements, alignment and positioning, data collection, data analysis and reporting

(U.S.) Ford Automotive Standards, Features of Density Meter

FORD FLTM BP 155-01-2006 CROSS-LINK DENSITY OF ELASTOMERS
FORD WSK-M4G292-B1-2011 SEALER, BUTYL RUBBER, PROFILED, SPOT WELDABLE, HEAT CURING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M99G117-C9-2012 ACTIVATED CARBON, PELLETS, LOW DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D851-A-2011 POLYPROPYLENE (PP) FOAM, CLOSED CELL 55 kg/m? DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4G348-A-2011 SEALER, EXPANDING, PUMPABLE, ANTI-FLUTTER, 35 - 55 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4G348-A3-2011 SEALER, EXPANDING, PUMPABLE, ANTI-FLUTTER, 10 - 20 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSB-M4G348-A
FORD WSS-M4G348-A4-2011 SEALER, NON-EXPANDING, PUMPABLE, ANTI-FLUTTER, 25 ?45 A ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSB-M4G348-A

Danish Standards Foundation, Features of Density Meter

DS/EN 45501+AC:1993 Metrologicai aspects of non-automatic weighing instruments
DS/EN ISO 1973:1996 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method
DS/ISO 1973:2021 Textile fibres – Determination of linear density – Gravimetric method and vibroscope method
DS/ISO 3274:1981 Instruments for the measurement of surface roughness by the profile method. Contact (stylus) instruments of consecutive profile transformation. Contact profile meters, system M
DS/EN 384:2010 Structural timber - Determination of characteristic values of mechanical properties and density
DS/EN ISO 1973:2021 Textile fibres – Determination of linear density – Gravimetric method and vibroscope method (ISO 1973:2021)
DS/EN ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument
DS/EN 23923-2:1994 Metallic powders. Determination of apparent density. Part 2: Scott volumeter method
DS/EN 13955:2003 Surface active agents - Determination of Krafft point and solubility of ionic surface active agents
DS/ETS 300240:1994 Private Telecommunications Network (PTN) - Signalling at the S-reference point - Generic feature key management protocol for the control of supplementary services
DS/EN ISO 13694:2000 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution

American Society for Testing and Materials (ASTM), Features of Density Meter

ASTM D5002-99 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-15 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-99(2005) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-99(2010) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-13 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-16 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-18 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-19 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-18e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-22 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM C729-05 Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM D7830/D7830M-14 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM B703-05 Standard Test Method for Apparent Density of Powders Using Arnold Meter
ASTM B703-10 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
ASTM C729-11(2022) Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM D7042-11a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D6814-02(2008) Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
ASTM D6814-02(2013) Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
ASTM E662-18 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-21a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-05 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-09 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-17a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-17 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-19 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-06 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-15 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-13c Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E662-13d Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM C138/C138M-10a Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C1135-00 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
ASTM C1135-00(2005) Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
ASTM C1135-15 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
ASTM C1135-00(2011) Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
ASTM A588-81 Standard Specification for High-Strength Low-Alloy Structural Steel With 50 Ksi Minimum Yield Point To 4 In. Thick
ASTM A588-79a Standard Specification for High-Strength Low-Alloy Structural Steel With 50 000 psi Minimum Yield Point To 4 in. Thick
ASTM D6187-97 Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence
ASTM D5767-18 Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces
ASTM D7454-08 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D7454-14 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D7454-14e1 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D6023-15 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)
ASTM C138/C138M-14 Standard Test Method for Density 40;Unit Weight41;, Yield, and Air Content 40;Gravimetric41; of Concrete
ASTM C138/C138M-16 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C138/C138M-17 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM A889/A889M-03 Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Inductions Using the Wattmeter-Varmeter-Ammeter-Voltmeter Method and 25-cm (250-mm) Epstein Frame
ASTM A889/A889M-93(1998) Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Inductions Using the Wattmeter-Varmeter-Ammeter-Voltmeter Method and 25-cm (250-mm) Epstein Frame
ASTM A889/A889M-14(2020) Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame
ASTM E2323-04 Standard Test Method for Calculating the Concentration of Fill Gas in a Sealed Insulating Glass Unit Using Measurements From an Oxygen Analyzer
ASTM B329-06 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
ASTM D6111-97 Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement

未注明发布机构, Features of Density Meter

DIN IEC 1342:1996 Nuclear instrumentation — Multichannel! pulse height analyzers — Main characteristics, technical requirements and test methods
DIN EN 1058:1996 Wood-based panels — Determination of characteristic values of mechanical properties and density
DIN EN 384:2004 Timber for load-bearing purposes – determination of characteristic values for mechanical properties and bulk density

PT-IPQ, Features of Density Meter

NP 1695-1980

International Organization for Standardization (ISO), Features of Density Meter

ISO 5072:2013 Brown coals and lignites.Determination of true relative density and apparent relative density
ISO 7759:1983 Anodizing of aluminium and its alloys; Measurement of reflectivity characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer
ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
ISO 3923-2:1981 Metallic powders; Determination of apparent density; Part 2 : Scott volumeter method
ISO/CD 5463 Geometrical product specifications (GPS) — Form measuring equipment; Rotary axis form measuring instruments — Design and metrological characteristics
ISO 16831:2012 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
ISO/IEC 7816-1:1998/Amd 1:2003 Identification cards - Integrated circuit(s) cards with contacts - Part 1: Physical characteristics; Amendment 1: Maximum height of the IC contact surface
ISO 7971-2:2019 Cereals — Determination of bulk density, called mass per hectolitre — Part 2: Method of traceability for measuring instruments through reference to the international standard instrument
ISO 13694:2000 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power [energy] density distribution
ISO 16413:2013 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry - Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument
ISO 16413:2020 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry — Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
ISO/CD 25178-605 Geometrical product specifications (GPS) — Surface texture: Areal — Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments
ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments
ISO/DIS 25178-605:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 605: Design and characteristics of non-contact (point autofocus probe) instruments

Association Francaise de Normalisation, Features of Density Meter

NF P98-241-1:1993 Test relating to pavements. Determination of the apparent specific gravity of the materials in situ. Part 1 : measurement of the mean value using a gammadensimeter in one point with direct transmission.
NF P21-358:2010 Structural timber - Determination of characteristic values of mechanical properties and density.
NF P21-305:1995 Wood-based panels. Determination of characteristic values of mechanical properties and density.
NF C97-030:1970 Electro-acoustics. Scales for plotting frequency characteristics ofelectro-acoustic instruments.
NF EN ISO 1973:2021 Fibres textiles - Détermination de la masse linéique - Méthode gravimétrique et méthode au vibroscope
NF EN IEC 60695-11-11:2021 Essais relatifs aux risques du feu - Partie 11-11 : flammes d'essai - Détermination de la densité de flux de chaleur caractéristique pour l'allumage à partir d'une flamme source sans contact
NF EN ISO 25178-606:2015 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 606 : caractéristiques nominales des instruments sans contact (à variation focale)
NF G01-001:1985 Textiles. Expression of linear density. Tex system.
NF P21-358/IN1*NF EN 384/IN1:2018 Structural timber - Determination of characteristic values of mechanical properties and density
NF P21-358*NF EN 384+A1:2018 Structural timber - Determination of characteristic values of mechanical properties and density
NF EN 384/IN2:2022 Bois de structure - Détermination des valeurs caractéristiques des propriétés mécaniques et de la masse volumique
NF EN 384+A2:2022 Bois de structure - Détermination des valeurs caractéristiques des propriétés mécaniques et de la masse volumique
NF G07-350*NF EN ISO 1973:2021 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method
NF G07-350:1996 Textile fibres. Determination of linear density. Gravimetric method and vibroscope method.
NF EN ISO 25178-605:2014 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 605 : caractéristiques nominales des instruments sans contact (capteur autofocus à point)
NF C83-403-801:2003 Detail Specification : High density rectangular connectors, round removable crimp contacts.
NF E05-052*NF EN ISO 3274:1998 Geometrical product specifications (GPS) - Surface texture : profile method - Nominal characteristics of contact (stylus) instruments
NF C83-403-801*NF EN 175301-801:2007 Detail Specification : high density rectangular connectors, round removable crimp contacts
NF C32-073-1:1993 MEASUREMENT OF SMOKE DENSITY OF ELECTRIC CABLES BURNING UNDER DEFINED CONDITIONS. PART 1 : TEST APPARATUS.
NF X10-113:1982 Determination of flowrate of fluids in closed conduits of circular cross-section. Method of velocity measurement at one point of the cross-section.
NF A95-115*NF EN 23923-2:1993 Metallic powders. Determination of apparent density. Part 2 : scott volumeter method.
NF P85-519:1998 Building construction. Sealants. Determination of adhesion/cohesion properties at variable temperatures.
NF EN 23923-2:1993 Poudres métalliques - Détermination de la masse volumique apparente - Partie 2 : méthode du volumètre de scott.
NF EN ISO 13385-2:2020 Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Partie 2 : caractéristiques de conception et caractéristiques métrologiques des jauges de profondeur
NF E05-031-601*NF EN ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture : areal - Part 601 : nominal characteristics of contact (stylus) instruments
NF EN 13955:2003 Agents de surface - Détermination du point de Krafft et de la solubilité des agents de surface ioniques
NF B41-203:1993 Advanced technical ceramics. Monolithic ceramics. General and textural properties. Part 2 : determination of density and porosity.
NF T73-424*NF EN 13955:2003 Surface active agents - Determination of Krafft point and solubility of ionic surface active agents.
NF E05-031-606*NF EN ISO 25178-606:2015 Geometrical product specification (GPS) - Surface texture : areal - Part 606 : nominal characteristics of non-contact (focus variation) instruments
NF A91-490*NF EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using agoniophotometer or an abridged goniophotometer
NF EN 1097-6:2022 Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 6 : détermination de la masse volumique et du coefficient d'absorption d'eau
NF P99-610:2014 Convenience and cleanliss street furniture - Seating furniture - Strength and stability characteristics of seating furniture items
NF EN ISO 7971-2:2019 Céréales - Détermination de la masse volumique, dite masse à l'hectolitre - Partie 2 : méthode de raccordement des instruments de mesure à l'étalon international
NF E05-031-605*NF EN ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture : areal - Part 605 : nominal characteristics of non-contact (point autofocus probe) instruments
NF P18-650-3*NF EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3 : determination of loose bulk density and voids
NF E05-031-602*NF EN ISO 25178-602:2010 Geometrical product specifications (GPS) - Surface texture : Areal - Part 602 : nominal characteristics of non-contact (confocal chromatic probe) instruments
NF L54-175-004*NF EN 3545-004:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non sealed rear, plastic housing, locking device, operating temperatures -55 oC to 175 oC - Part 004 : Connectors with male contacts - Product standard
NF P18-650-7*NF EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7 : determination of the particle density of filler - Pyknometer method.
NF EN 1097-7:2022 Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 7 : détermination de la masse volumique réelle du filler - Méthode au picnomètre
NF EN ISO 25178-601:2010 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 601 : caractéristiques nominales des instruments à contact (à palpeur)

International Electrotechnical Commission (IEC), Features of Density Meter

IEC 61874:1998 Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ("density logging")
IEC 60692:1999 Nuclear instrumentation - Density gauges utilizing ionizing radiation - Definitions and test methods
CISPR 16-1-5:2014+AMD1:2016 CSV Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for
CISPR 16-1-5-2016 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for
CISPR 16-1-5-2014+AMD1-2016 CSV Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for
CISPR 16-1-5-2014/AMD1-2016 Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference
CISPR 16-1-5:2014/AMD1:2016 Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference
IEC 61435:2013 Nuclear instrumentation - High-purity germanium crystals for radiation detectors - Measurement methods of basic characteristics
IEC 62566-2:2020 Nuclear power plants - Instrumentation and control systems important to safety - Development of HDL-programmed integrated circuits - Part 2: HDL-programmed integrated circuits for systems performing c
IEC TS 62607-4-2:2016 Nanomanufacturing - Key control characteristics - Part 4-2: Nano-enabled electrical energy storage - Physical characterization of cathode nanomaterials, density measurement

ES-AENOR, Features of Density Meter

UNE 104-311-1991 Plastics. High density poliethylene sheets coextruded with other types of polyethylene for waterproofing in civil works. Specifications and test methods
UNE 21 084
UNE 53-432 Pt.2-1992
UNE 53-432 Pt.3-1992 Plastic. High density polythylene Tanks for storaging liquid fuel with point flammability no higher tham 55 centi-degree. No pigmented tanks. Part 3: Specifications for Rotomoulding tanks with PE-X
UNE 53-432 Pt.1-1992 Plastic. High density polythylene Tanks for storaging liquid fuel with point flammability no higher tham 55 centi-degree. No pigmented tanks. Part 1: General tests
UNE 61-032-1990
UNE 53-328-1985
UNE 15-009 Pt.2-1994 Tool shanks with 7/24 taper for automatic tool changers. Part 2: Retention knobs for shanks Nos. 40,45 and 50. Dimensions and mechanical characteristics
UNE 104-300-1991 Plastics. High density poliethylene sheets for civil engineering waterproofing. Specifications and test methods
UNE 53-365-1990
UNE 80-103-1986

Professional Standard - Machinery, Features of Density Meter

JB/T 5996-1992 Roundness measurement Assessment of accuracy of three-point measuring method and the measurement instrument used

Japanese Industrial Standards Committee (JISC), Features of Density Meter

JIS H 0610:1966 Method of measurement of etch pit density of germanium crystal
JIS B 7555:2003 Method of flow measurement by coriolis meters (mass flow, density and volume flow measurement)
JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test
JIS Z 8736-1:1999 Acoustics -- Determination of sound power levels of noise sources using sound intensity -- Part 1: Measurement at discrete points
JIS R 1639-2:1999 Test methods of properties of fine ceramic granules Part 2: Bulk density
JIS K 5600-2-4:1999 Testing methods for paints -- Part 2: Characteristics and stability of paints -- Section 4: Density
JIS K 6219-2:2006 Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 2: Determination of pour density

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Features of Density Meter

ASHRAE 3763-1994 Predicting the Temperature@ Humidity@ Pressure@ and/or Density Effects on Velocity Instrumentation
ASHRAE DA-07-015-2007 Characterization of a High-Density Data Center
ASHRAE NA-04-4-2-2004 Thermal Profile of a High-Density Data Center-Methodology to Thermally Characterized a Data Center

CZ-CSN, Features of Density Meter

CSN 44 1324-1985 Determination of the bulk density of coal for special purposes
CSN 44 1324-1963 Determination of ?he bulk density of coal for special purposes
CSN 44 2605-1993 Hydraulic individual props for mines
CSN 64 0805-1966 Determination of apparent density f moulding materials lhát cannot e poured írora a funncl
CSN 64 0805-1985 Plastics. etermination of apparent ensity of moulding materiál hat cannot be poured from specified funnel
CSN IEC 737:1994 In-core temperature or primary envelope temperature measurements in nuclear power reactor. Characteristics and test methods
CSN ETS 300 240-1995 Private Telecommunication Network. Signalling at the S-reference point. Generic feature key management protokol for the control of supplementary services

Standard Association of Australia （SAA）, Features of Density Meter

AS 1289.5.8.6:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Assigned density of a Type B standard density block
AS 1289.5.8.5:1998 Methods of testing soils for engineering purposes - Soils compaction and density tests - Nuclear surface moisture-density gauges - Density of a Type A or Type C standard density block
AS 1289.5.8.1:2007 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture?Density gauge - Direct transmission mode
AS 1289.5.8.8:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using proportion of water
AS 1289.5.8.7:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using hydrogen content of components
AS 1289.5.8.9:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using comparison against primary blocks
AS 1012.3.4:1998 Methods of testing concrete - Determination of properties related to the consistency of concrete - Compactibility index
AS/NZS ISO 13694:2004 Optics and optical instruments - Lasers and laser-related equipment -Test methods for laser beam power (energy) density distribution
AS 1012.3.2:1998 Methods of testing concrete - Determination of properties related to the consistency of concrete - Compacting factor test

American National Standards Institute （ANSI), Features of Density Meter

ANSI/TAPPI T1217 sp-2012 Photometric linearity of optical properties instruments
ANSI/IEEE 1308:1994 Recommended Practice for Instrumentation for Magnetic Flux Density and Electric Field Strength Meters – 10Hz to 3kHz
ANSI/ASTM E662a:2013 Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ANSI/ASTM E662b:2013 Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ANSI/ASTM E662c:2013 Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ANSI/ASTM E662 REV A:2021 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ANSI/INCITS/ISO/IEC 7816-1/AMD 1:2003 Identification cards - Integrated circuit(s) cards with contacts - Part 1: Physical characteristics - Amendment 1: Maximum height of the IC contact surface
ANSI/ISO/IEC 10536-1:1992 Identification cards - Contactless integrated circuit(s) cards - Part 1: Physical characteristics Adopted by INCITS

British Standards Institution (BSI), Features of Density Meter

BS IEC 60692:1999 Nuclear instrumentation. Density gauges utilizing ionizing radiation. Definitions and test methods
BS EN ISO 1973:1996 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method
BS EN ISO 1973:2021 Textile fibres. Determination of linear density. Gravimetric method and vibroscope method
BS 1902 Sec.3.17:1990 Methods of testing refractory materials. General and textural properties. Determination of volume and bulk density of dense shaped products (methods 1902-317)
18/30382072 DC BS IEC 61468. Nuclear power plants. Instrumentation systems important to safety. In-core instrumentation. Characteristics and test methods of self-powered neutron detectors
19/30400212 DC BS IEC 61468. Nuclear power plants. Instrumentation systems important to safety. In-core instrumentation. Characteristics and test methods of self-powered neutron detectors
BS EN 384:2004 Structural timber - Determination of characteristic values of mechanical properties and density
BS EN 384:2010 Structural timber - Determination of characteristic values of mechanical properties and density
BS EN 384:2016 Structural timber. Determination of characteristic values of mechanical properties and density
BS EN 1058:1996 Wood-based panels - Determination of characteristic values of mechanical properties and density
BS EN 384:2016+A2:2022 Structural timber. Determination of characteristic values of mechanical properties and density
BS IEC 60692:2000 Nuclear instrumentation - Density gauges utilizing ionizing radiation - Definitions and test methods
BS EN 23923-2:1993 Metallic powders. Determination of apparent density. Scott volumeter method
20/30406526 DC BS EN ISO 1973. Textile fibres. Determination of linear density. Gravimetric method and vibroscope method
BS EN 175301-801:2007 Detail specification - High density rectangular connectors, round removable crimp contacts
BS EN 175301-801:2006 Detail Specification: High density rectangular connectors, round removable crimp contacts
BS 947:1970 Specification for a universal system for designating linear density of textiles (Tex system)
BS ISO 1144:2016 Textiles. Universal system for designating linear density (Tex System)
19/30400980 DC BS EN 384 AMD2. Structural timber. Determination of characteristic values of mechanical properties and density
BS EN ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Method of traceability for measuring instruments through reference to the international standard instrument
BS EN 1097-6:2000 Tests for mechanical and physical properties of aggregates - Determination of particle density and water absorption
BS IEC 61435:2013 Nuclear instrumentation. High-purity germanium crystals for radiationdetectors. Measurement methods of basic characteristics
BS EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Determination of loose bulk density and voids
21/30434328 DC BS EN 63374. Nuclear power plants. Instrumentation systems important to safety. Characteristic and test methods of nuclear reactor reactivity meter
BS EN 623-2:1993 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Determination of density and porosity
BS 2782-7 Method 740C:1996 Methods of testing plastics. Rheological properties. Polymer dispersions. Determination of white point temperature and minimum film-forming temperature
18/30377599 DC BS EN 61034-1 AMD2. Measurement of smoke density of cables burning under defined conditions. Part 1. Test apparatus
BS IEC 60737:2010 Nuclear power plants - Instrumentation important to safety Temperature sensors (in-core and primary coolant circuit) - Characteristics and test methods
BS 1902 Sec.3.4:1981 Methods of testing refractory materials. General and textural properties. Determination of true density (method 1902-304)
BS EN 61262-3:1995 Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment.. Determination of the luminance distribution and luminance non-uniformity
BS EN 3545-003:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Connectors with female contacts - Product standard
BS EN 3545-003:2005 Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 ℃ to 175 ℃ — Part 003: Connectors with female contacts — Product standard
BS 1902 Sec.3.5:1981 Methods of testing refractory materials. General and textural properties. Determination of powder density (method 1902-305)
BS EN ISO 25178-605:2014 Geometrical product specifications (GPS). Surface texture: Areal. Nominal characteristics of non-contact (point autofocus probe) instruments
BS EN ISO 13694:2001 Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam power (energy) density distribution
BS ISO 16413:2013 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry. Instrumental requirements alignment and positioning, data collection, data analysis and reporting
BS ISO 16413:2020 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry. Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
BS EN ISO 11833-1:2007 Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Sheets of thickness not less than 1 mm
BS EN ISO 3386-2:1998+A1:2010 Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - High-density materials
BS EN 3545-004:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Connectors with male contacts - Product standard
BS EN 3545-004:2005 Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 ℃ to 175 ℃ - Part 004: Connectors with male contacts - Product standard
BS PD IEC TR 63335:2021 Nuclear power plants. Instrumentation and control systems, control rooms and electrical power systems. Specific features of small modular reactors and needs regarding standards

BE-NBN, Features of Density Meter

NBN C 73-299-1979
NBN 698 F-1966
NBN C 92-013-1992
NBN-EN 60051-7-1994 Direct acting indicating analogue electrical measuring instruments and their accessories Part 7: Special requirements for multi-function instruments
NBN-EN 60051-6-1994 Direct acting indicating analogue electrical measuring instruments and their accessories Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters
NBN C 92-011-1992
NBN-EN 60051-8-1994 Direct acting indicating analogue electrical measuring instruments and their accessories Part 8: Special requirements for accessories
NBN-EN 60051-9-1994 Direct acting indicating analogue electrical measuring instruments and their accessories Part 8: Special requirements for accessories
NBN-ISO 9047:1992 Building construction - Sealants - Determination of adhesion/cohesion properties at variable temperatures
NBN C 73-335-41 ADD 1-1992
NBN-EN 26360-2-1992 Dentistry. Dental rotary instruments. Number coding system. Part 2: Shape and specific characteristics (ISO 6360-2: 1986 with addendum)
NBN EN 623-2-1993 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 2: Determination of density and porosity
NBN-EN 60051-5-1994 Direct acting indicating analogue electrical measuring instruments and their accessories Part 5: Special requirements for phase meters, power factor meters and synchroscopes
NBN-EN 60051-2-1994 Direct acting indicating analogue electrical measuring instruments and their accessories Part 2: Special requirements for ammeters and voltmeters
NBN-EN 60051-3-1994 Direct acting indicating analogue electrical measuring instruments and their accessories Part 3: Special requirements for wattmeters and varmeters
NBN C 71-598-218-1987

HU-MSZT, Features of Density Meter

RU-GOST R, Features of Density Meter

GOST R 53177-2008 Vacuum technology. Measurement of performance characteristics of mass-spectrometer method of tightness control
GOST R 54279-2010 Petroleum products. Methods for determination of flash point in Pensky-Martens closed cup tester
GOST 25645.102-1983 Earth upper atmosphere. Computation methods of density variation characteristics
GOST 28976-1991 Photovoltaic devices of crystalline silicon. Procedures for temperature and irradiance corrections to measured current voltage characteristics
GOST R 54525-2011 Data quality. Part 130. Master data. Exchange of characteristic data. Accuracy
GOST R 54525-2011(2019) Data quality. Part 130. Master data. Exchange of characteristic data. Accuracy
GOST 8.508-1984 State system for ensuring the uniformity of measurements. Metrological characteristics of measurements means and precision characteristics of automation means. General methods of estimate and control
GOST R ISO 10849-2006 Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Performance characteristics of automated measuring systems
GOST 8.171-1975 State system of ensuring the uniformity of measurements. Actual measures of the surface density for radiation thickness gauges. General specifications
GOST R ISO 9919-1999 Pulse oximeters for medical use. Technical requirements and test methods
GOST R ISO 9919-2007 Medical electrical equipment. Particular requirements for basic safety and essential performance of pulse oximeters
GOST R ISO 7935-2007 Stationary source emissions. Determination of the mass concentration of sulfur dioxide. Performance characteristics of automated measuring methods
GOST R ISO 13694-2010 Optics and optical instruments. Laser and laser-related equipment. Test methods for laser beam power (energy) density distribution
GOST 30319.2-2015 Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
GOST R 51801-2001 General requirements for machines, instruments and other industrial products as to chemically active and other special media endurance

PL-PKN, Features of Density Meter

PN C04185-1988 Petroleum products Performance characteristic ot" lubricating greases in SKF R2F testing apparatus

International Commission on Illumination (CIE), Features of Density Meter

CIE Pub.69-1987 Methods of characterizing illuminance meters and luminance meters. Performance, characteristics and specifications

Professional Standard - Medicine, Features of Density Meter

YY/T 0939-2014 Ultrasound bone sonometers.Test method of broadband ultrasound attenuation (BUA)

ES-UNE, Features of Density Meter

UNE-EN ISO 1973:2022 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method (ISO 1973:2021)
UNE-EN 384:2016+A2:2023 Structural timber - Determination of characteristic values of mechanical properties and density
UNE-ETS 300240 Ed1:2022 Private Telecommunication Network (PTN);Signalling at the S-reference point;Generic feature key management protocol for the control of supplementary services (Endorsed by Asociación Española de Normalización in May of 2022.)
UNE-EN ISO 7971-2:2019 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2019)
UNE-EN ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014) (Endorsed by AENOR in January of 2015.)

Institute of Electrical and Electronics Engineers (IEEE), Features of Density Meter

IEEE P1308 IEEE Approved Draft Recommended Practice for Instrumentation: Specifications for Magnetic Flux Density and Electric Field Strength Meters - 10 Hz to 3 kHz
IEEE P1308/D5, October 2022 IEEE Approved Draft Recommended Practice for Instrumentation: Specifications for Magnetic Flux Density and Electric Field Strength Meters - 10 Hz to 3 kHz
IEEE Std 1308-2023 IEEE Recommended Practice for Instrumentation: Specifications for Magnetic Flux Density and Electric Field Strength Meters—10 Hz to 3 kHz
IEEE 1308-2023 IEEE Recommended Practice for Instrumentation: Specifications for Magnetic Flux Density and Electric Field Strength Meters—10 Hz to 3 kHz

European Committee for Standardization (CEN), Features of Density Meter

EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010)
EN 1058:1995 Wood-Based Panels - Determination of Characteristic Values of Mechanical Properties and Density
EN 384:2010 Structural timber - Determination of characteristic values of mechanical properties and density
EN 384:1995 Structural Timber - Determination of Characteristic Valves of Mechanical Properties and Density
EN 384:2016 Structural timber - Determination of characteristic values of mechanical properties and density
prEN 864-1992 Medical electrical equipment; capnometer for uses with humans; particular requirements
EN 12373-13:2000 Aluminium and Aluminium Alloys - Anodizing - Part 13: Measurement of Reflectance Characteristics of Aluminium Surfaces Using a Goniophotometer or an Abridged Goniophotometer
prEN 623-2-1992 Advanced technical ceramics; monolithic ceramics; general and textural properties; part 2: determination of density and porosity
EN ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2009)
EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014)
EN ISO 2286-3:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness
EN 23923-2:1993 Metallic powders; determination of apparent density; part 2: Scott volumeter method (ISO 3923-2:1981)
EN 3545-004:2005 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 004: Connectors with male contacts - Product standard

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Features of Density Meter

GB/T 4107-1983 Magnesium powders--Determination of apparent density--Scott volumetric method
GB/T 4107-2004 Determination of apparant density of magnesium powder Scott volumetric method
GB/T 20506-2006 Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer
GB/T 5060-1985 Metallic powders--Determination of apparent density--Part 2: Scott volumeter method
GB/T 1479.2-2011 Metallic powders—Determination of apparent density—Part 2:Scott volumeter method
GB/T 5800.1-2012 Rolling bearings.Instrument precision bearings.Part 1:Boundary dimensions,tolerances and characteristics of metric series bearings
GB/T 5800.2-2012 Rolling bearings.Instrument precision bearings.Part 2:Boundary dimensions,tolerances and characteristics of inch series bearings
GB/T 17651.1-1998 Measurement of smoke density of cables burning under defined conditions. Part 1: Test apparatus
GB/T 7165.5-2008 Equipment for continuous monitoring of radioactivity in gaseous effluents.Part 5:Specific requirements for tritium monitors
GB/T 7165.4-1989 Equipment for continuously monitoring radioactivity in gaseous effluents--Part 4: Specific requirements for iodine monitors

CL-INN, Features of Density Meter

INDITECNOR 20-53

American Society of Mechanical Engineers (ASME), Features of Density Meter

ASME PTC 19.16-1965 Instruments and apparatus - Part 16: Density Determinations solids and liquids

Defense Logistics Agency, Features of Density Meter

DLA DSCC-DWG-02007 REV A-2004 CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 396 CONTACT POSITIONS
DLA DSCC-DWG-03023 REV A-2004 CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 396 CONTACT POSITIONS
DLA MIL-DTL-27599 D SUPP 1-2010 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTANT, SOLDER CONTACTS, GENERAL SPECIFICATION FOR
DLA MIL-DTL-28840/7 D-2009 CONNECTORS, ELECTRICAL, CIRCULAR, SCREW THREADS, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CRIMP CONTACTS, DUMMY RECEPTACLE, WALL MOUNTING

Professional Standard - Textile, Features of Density Meter

FZ/T 01035-2014 Textiles.Universal system for designating linear density (Tex System)
FZ/T 01035-1993 Universal system for marking linear density of textile materials (Tex system)

VDE - VDE Verlag GmbH@ Berlin@ Germany, Features of Density Meter

FNN LASTENHEFT EHZ-2010 Lastenheft eHZ - Elektronische Haushaltszaehler in Stecktechnik@ konstruktive Merkmale; Version 2.1

CEN - European Committee for Standardization, Features of Density Meter

EN 384:2004 Structural timber - Determination of characteristic values of mechanical properties and density
EN ISO 7971-2:2019 Cereals - Determination of bulk density@ called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument
PREN 16720-2-2014 Characterization of sludges - Physical consistency - Part 2: Determination of solidity - Method by pocket vane shear apparatus

Canadian General Standards Board （CGSB), Features of Density Meter

CGSB 88.21-M90-CAN/CGSB-1990 Graduations Et Marques Des Instruments De Mesure Lineaire Pour La Construction, L'Arpentage Et D'Autres Applications Particulieres

Lithuanian Standards Office , Features of Density Meter

LST EN 384-2010 Structural timber - Determination of characteristic values of mechanical properties and density
LST EN ISO 1973:2000 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method (ISO 1973:1995)
LST ETS 300 240 Leid.1-2006 Private Telecommunication Network (PTN);Signalling at the S-reference point;Generic feature key management protocol for the control of supplementary services
LST EN 13955-2003 Surface active agents - Determination of Krafft point and solubility of ionic surface active agents
LST EN ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2009)
LST ISO 10155:2001 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications
LST EN 55016-1-5-2005 Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-5: Radio disturbance and immunity measuring apparatus. Antenna calibration test sites for 30 MHz to 1 000 MHz (CISPR 16-1-5:2003)

AENOR, Features of Density Meter

UNE-EN 384:2016 Structural timber - Determination of characteristic values of mechanical properties and density
UNE-EN ISO 1973:1996 TEXTILE FIBRES. DETERMINATION OF LINEAR DENSITY. GRAVIMETRIC METHOD ANd vibroscope method. (ISO 1973:1995).
UNE-EN ISO 15212-2:2003 Osscilation-type density meters. Part 2: Process instruments for homogenous liquids. (ISO 15212-2:2002)
UNE 40225-1:1974 IN WOOL. DETERMINATION OF SHORT TERM IRREGULARITY OF LINEAR DENSITY OF SILVERS, ROVING AND YARNS, BY MEANS OF AN ELECTRONIC EVENESS TESTER.
UNE 22950-5:1996 MECHANICAL PROPERTIES OF ROCKS. STRENGTH DETERMINATION TESTS. PART 5: POINT LOAD TEST.
UNE-EN 13955:2003 Surface active agents - Determination of Krafft point and solubility of ionic surface active agents.
UNE-EN ISO 7971-2:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2009)

GOSTR, Features of Density Meter

GOST 34233.4-2017 Vessels and apparatus. Norms and methods of strength calculation. Strength and leak-tightness calculation of flange joints

United States Navy, Features of Density Meter

NAVY MIL-T-29018 A-1972 TRAINING AID; DEMONSTRATOR, RADIO CONTROLLED, SHIPS CHARACTERISTICS GENERAL SPECIFICATION FOR

AASHTO - American Association of State Highway and Transportation Officials, Features of Density Meter

T 272-2018 Standard Method of Test for One-Point Method for Determining Maximum Dry Density and Optimum Moisture
T 272-2016 Standard Method of Test for One-Point Method for Determining Maximum Dry Density and Optimum Moisture
TP 85-2010 Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument (Revision 1)
TP 87-2010 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR)

国家市场监督管理总局、中国国家标准化管理委员会, Features of Density Meter

GB/T 40291-2021 Nuclear instrumentation High—purity germanium crystals for radiation detectors—Measurement methods of basic characteristics
GB/T 39843-2021 Electronic characteristic measurements—Local critical current density and its distribution in large-area superconducting films
GB/T 17651.1-2021 Measurement of smoke density of cables or optical fiber cables burning under defined conditions—Part 1: Test apparatus

Professional Standard - Grain, Features of Density Meter

LS/T 6101-2002 Determination of pasting properties of cereals (rapid viscosity analyzer method)

AT-ON, Features of Density Meter

ONORM M 6773-2001 Surface texture of tooth flanks - Roughness parameters, determination of roughness parameters using stylus instruments, measuring instruments and measuring conditions
ONORM M 9410-1991 Air quality; measuring technique; definitions and characteristics for continuous emission and ambient air monitoring instruments

SE-SIS, Features of Density Meter

SIS SS 16 11 41-1986 Plastics - Determination of apparent density of material that can be poured from a specified funnel
SIS SS-ISO 5066/1:1988 Aircraft — Hermetically sealed monostable electrical relays, 2A and 3A — Part 1: Operating characteristics and test conditions

IN-BIS, Features of Density Meter

European Committee for Electrotechnical Standardization（CENELEC）, Features of Density Meter

EN 175301-801:2006 Detail Specification: High density rectangular connectors, round removable crimp contacts

CENELEC - European Committee for Electrotechnical Standardization, Features of Density Meter

EN 175301-801:1999 Detail Specification: High Density Rectangular Connectors@ Round Removable Crimp Contacts
EN 50268-1:1999 Common Test Methods for Cables under Fire Conditions - Measurement of Smoke Density of Cables Burning under Defined Conditions - Part 1: Apparatus

NL-NEN, Features of Density Meter

NEN 5498-1991 Determination of the characteristic value of the bending strength and the elastic modulus parallel to the grain and the density of sawn timber
NEN-ISO 6360-2:1994 Dentistry. Dental rotary instruments. Number coding system. Part 2: Shape and specific characteristics (ISO 6360-2:1986+A1:1991)
NEN-ISO 3923-2:1993 Metallic powders. Determination of apparent density. Part 2: Scott volumeter method (ISO 3923-2:1981)

ESDU - Engineering Sciences Data Unit, Features of Density Meter

ESDU 77024 B-1979 Thermal conductivity@ viscosity@ heat capacity@ density and Prandtl number of sea water and its concentrates.
ESDU 68023-1978 Thermal conductivity@ viscosity@ heat capacity@ density and Prandtl number of solid@ liquid and gaseous heavy water.

The American Road & Transportation Builders Association, Features of Density Meter

AASHTO TP24-1994 Standard Test Method for Determining the Density of Freshly Mixed Concrete in Place Using a Twin-Probe Nuclear Density Gauge 2000 Edition; Interim Edition 4/2001 R(1996)
AASHTO TP 85-2010 Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument
AASHTO T 121M/T 121-2009 Standard Method of Test for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
AASHTO TP 87-2010 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR)

European Telecommunications Standards Institute (ETSI), Features of Density Meter

ETSI TS 102 329-2007 Fixed Radio Systems; Point-to-Point equipment; Radio equipment and antennas for use in Point-to-Point High Density applications in the Fixed Services (HDFS) frequency band 64 GHz to 66 GHz
ETSI TS 102 329-2004 Fixed Radio Systems; Point-to-Point equipment; Radio equipment and antennas for use in Point-to-Point High Density applications in the Fixed Services (HDFS) frequency band 64 GHz to 66 GHz V1.1.1
ETSI PRETS 300 240-1993 Private Telecommunications Network (PTN); Signalling at the S-Reference Point Generic Feature Key Management Protocol for the Control of Supplementary Services
ETSI PRETS 300 240-1992 Private Telecommunications Network (PTN); Signalling at the S-Reference Point Generic Feature Key Management Protocol for the Control of Supplementary Services

ETSI - European Telecommunications Standards Institute, Features of Density Meter

TS 102 329-2004 Fixed Radio Systems; Point-to-Point equipment; Radio equipment and antennas for use in Point-to-Point High Density applications in the Fixed Services (HDFS) frequency band 64 GHz to 66 GHz (V1.1.1)
TS 102 329-2007 Fixed Radio Systems; Point-to-Point equipment; Radio equipment and antennas for use in Point-to-Point High Density applications in the Fixed Services (HDFS) frequency band 64 GHz to 66 GHz (V1.2.1)
PRETS 300 240-1992 Private Telecommunications Network (PTN); Signalling at the S-Reference Point Generic Feature Key Management Protocol for the Control of Supplementary Services
PRETS 300 240-1993 Private Telecommunications Network (PTN); Signalling at the S-Reference Point Generic Feature Key Management Protocol for the Control of Supplementary Services
ETS 300 240-1993 Private Telecommunication Network (PTN); Signalling at the S- Reference Point Generic Feature Key Management Protocol for the Control of Supplementary Services

ZA-SANS, Features of Density Meter

SANS 61034-1:2006 Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus

International Telecommunication Union (ITU), Features of Density Meter

ITU-R QUESTION 266/4-2001 Technical characteristics of high-density fixed-satellite service earth stations operating with geostationary satellite orbit fixed-satellite service networks in the 20/30 GHz bands
ITU-R F.1765-2006 Methodology for determining the aggregate equivalent isotropically radiated power from point-to-point high-density applications in the fixed service operating in bands above 30 GHz
ITU-R F.1765 FRENCH-2006 Methodology for determining the aggregate equivalent isotropically radiated power from point-to-point high-density applications in the fixed service operating in bands above 30 GHz
ITU-R F.1765 SPANISH-2006 Methodology for determining the aggregate equivalent isotropically radiated power from point-to-point high-density applications in the fixed service operating in bands above 30 GHz
ITU-R F.1766-2006 Methodology to determine the probability of a radio astronomy observatory receiving interference based on calculated exclusion zones to protect against interference from point-to-multipoint high-density applications in the fixed service operating in bands
ITU-R M.2059-0-2014 Operational and technical characteristics and protection criteria of radio altimeters utilizing the band 4 200-4 400 MHz
ITU-R F.1760 SPANISH-2006 Methodology for the calculation of aggregate equivalent isotropically radiated power (a.e.i.r.p.) distribution from point-to-multipoint high-density applications in the fixed service operating in bands above 30 GHz identified for such use
ITU-R F.1760-2006 Methodology for the calculation of aggregate equivalent isotropically radiated power (a.e.i.r.p.) distribution from point-to-multipoint high-density applications in the fixed service operating in bands above 30 GHz identified for such use
ITU-R F.1760 FRENCH-2006 Methodology for the calculation of aggregate equivalent isotropically radiated power (a.e.i.r.p.) distribution from point-to-multipoint high-density applications in the fixed service operating in bands above 30 GHz identified for such use
ITU-T G.975.1 FRENCH-2004 Forward error correction for high bit-rate DWDM submarine systems
ITU-T G.975.1 SPANISH-2004 Forward error correction for high bit-rate DWDM submarine systems
ITU-R S.1783 FRENCH-2007 Technical and operational features characterizing high-density applications in the fixed-satellite service
ITU-R S.1783 SPANISH-2007 Technical and operational features characterizing high-density applications in the fixed-satellite service
ITU-R S.1594-2002 Technical characteristics of high density fixed-satellite service earth stations transmitting towards geostationary fixed-satellite service space stations in the 30 GHz range*
ITU-R F.1766 FRENCH-2006 Methodology to determine the probability of a radio astronomy observatory receiving interference based on calculated exclusion zones to protect against interference from point-to-multipoint high-density applications in the fixed service operating in bands
ITU-R F.1766 SPANISH-2006 Methodology to determine the probability of a radio astronomy observatory receiving interference based on calculated exclusion zones to protect against interference from point-to-multipoint high-density applications in the fixed service operating in bands

CH-SNV, Features of Density Meter

European Association of Aerospace Industries, Features of Density Meter

AECMA PREN 3545-003-2004 Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 Degrees C to 175 Degrees C Part 003 : Connectors with female contacts Product standard Edition P 3
AECMA PREN 3545-003-2002 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 003 : Connectors with Female Contacts Product Standard Edition P 2
AECMA PREN 3545-003-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 003 : Connectors with Female Contacts Product Standard Edition P 1
AECMA PREN 3545-004-2004 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 004 : Connectors with Male Contacts - Product Standard Edition P 3
AECMA PREN 3545-004-2002 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 004 : Connectors with Male Contacts Product Standard Edition P 2
AECMA PREN 3545-004-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 004 : Connectors with Male Contacts Product Standard Edition P 1
AECMA PREN 3545-002-2006 Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 癈 to 175 癈 Part 002: Specification of performance and contact arrangements Edition P 5
AECMA PREN 3545-002-1998 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees Celsius to 175 Degrees Celsius Part 002: Specification of Performance and Contact Arrangements Edi
AECMA PREN 3545-002-2004 Aerospace series Connectors, electrical rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 Degrees Celsius to 175 Degrees Celsius Part 002: Specification of performance and contact arrangements Editi
AECMA PREN 3545-002-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Devices, Operating Temperatures - 55 Degrees Celsius to 175 Degrees Celsius Part 002: Specification of Performance and Contact Arrangements Ed
AECMA PREN 3545-001-2006 Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 癈 to 175 癈 Part 001: Technical specification Edition P 4
AECMA PREN 3545-001-2004 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 001 : Technical Specification Edition P 3
AECMA PREN 3545-001-2002 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 001 : Technical Specification Edition P 2
AECMA PREN 3372-005-1989 Aeropsace Series Circular Electrical Connectors Medium and High Density, Scoop-Proof with Bayonet Coupling, 175 Degrees C Type C, Fixed Connector, Hermetic, Solder Flange, Male Contacts, Solder Connection Individual Sheet
AECMA PREN 3545-007-2002 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 007 : Cable Clamp Product Standard Edition P 2
AECMA PREN 3545-007-2004 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 007 : Cable Clamp Product Standard Edition P 3
AECMA PREN 3545-007-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 007 : Cable Clamp Product Standard Edition P 1

KR-KS, Features of Density Meter

KS C IEC 61034-1-2020 Measurement of smoke density of cables burning under defined conditions — Part 1: Test apparatus
KS D ISO 16413-2021 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry — Instrumental requirements, alignment and positioning, data collection, data analysis and reporting

National Association of Corrosion Engineers (NACE), Features of Density Meter

NACE TM0384-2002 Holiday Detection of Internal Tubular Coatings of Less Than 250 Micrometers (10 mils) Dry-Film Thickness Item No:21216
NACE TM0186-2002 Holiday Detection of Internal Tubular Coatings of 250 to 760 um (10 to 30 Mils) Dry Film Thickness Item No:21218

GB-REG, Features of Density Meter

REG NACA-TR-530-1936 Characteristics of the N.A.C.A. 23012 airfoil from tests in the full-scale and variable-density tunnels

Association of German Mechanical Engineers, Features of Density Meter

DVS 2902-2-1977 Resistance spot welding of steels of an individual thickness of up to 3 mm; spot welding characteristics of unalloyed and low-alloy steels (alloy content <= 5%)
VDI/VDE 2617 Blatt 10.1-2014 Accuracy of coordinate measuring machines - Characteristics and their checking - Laser trackers with multiple probing systems
VDI/VDE 2617 Blatt 10-2011 Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests of lasertrackers

YU-JUS, Features of Density Meter

JUS B.B7.113-1993 Rock mechanics - Physical and mechanical testing of rocks - Determination of apparent density
JUS C.A2.037-1987 Phisical tests ofmetafs. Determination ofapparentdensity ofmetallic povvders. Scott volumeter method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Features of Density Meter

GB/T 36053-2018 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry—Instrumental requirements, alignment and positioning, data collection, data analysis and reporting

Indonesia Standards, Features of Density Meter

SNI IEC 60051-3:2009 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3: Special requirements for wattmeters and varmeters

VN-TCVN, Features of Density Meter

TCVN 4996-2-2011 Cereals.Determination of bulk density, called mass per hectolitre.Part 2: Method of traceability for measuring instruments through reference to the international standard instrument

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Features of Density Meter

PREN 3372-002-1989 Aerospace Series Circular Electrical Connectors of Medium and High Density@ Scoop-Proof with Bayonet Coupling 175 Degrees Celsius and 200 Degrees Celsius Data for Selection and Contact Arrangement
PREN 3372-005-1989 Aeropsace Series Circular Electrical Connectors Medium and High Density@ Scoop-Proof with Bayonet Coupling@ 175 Degrees C Type C@ Fixed Connector@ Hermetic@ Solder Flange@ Male Contacts@ Solder Connection Individual Sheet

Society of Automotive Engineers (SAE), Features of Density Meter

SAE AS29600/1-1998 CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS, SEALING PLUG, SIZE 8, (SERIES A) FSC 5935

SAE - SAE International, Features of Density Meter

SAE AS29600/1A-2014 CONNECTOR@ ELECTRICAL@ CIRCULAR@ MINIATURE@ COMPOSITE@ HIGH DENSITY@ QUICK COUPLING@ ENVIRONMENT RESISTANT@ REMOVABLE CRIMP CONTACTS@ SEALING PLUG@ SIZE 8@ (SERIES A)

(U.S.) Telecommunications Industries Association , Features of Density Meter

TIA-4963-2013 Electrical Characteristic of Generators and Receivers with Reversed-Wire Immunity for Use in Balanced Digital Multipoint Systems

API - American Petroleum Institute, Features of Density Meter

API MPMS 11.5.2-2009 Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Section 5 - Density/Weight/Volume Intraconversion Part 2 - Conversions for Relative Density (60/60 °F) (First Edition)
API MPMS 11.5.3-2009 Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Section 5 - Density/Weight/Volume Intraconversion Part 3 - Conversions for Absolute Density at 15 °C (First Edition)