ZH
KR
JP
ES
RU
DE

Flammability detector verification

Flammability detector verification, Total:500 items.

In the international standard classification, Flammability detector verification involves: Explosion protection, Electrical equipment for working in special conditions, Equipment for petroleum and natural gas industries, Electrical and electronic testing, Protective equipment, Alarm and warning systems, Fuels, Occupational safety. Industrial hygiene, Non-destructive testing, Construction materials, Mining equipment, Mining and quarrying, Measurement of fluid flow, Analytical chemistry, Nuclear energy engineering, Metrology and measurement in general, Quality, Industrial automation systems, Company organization and management, Electromagnetic compatibility (EMC), Diagnostic, maintenance and test equipment, Optics and optical measurements, Linear and angular measurements, Telecommunication terminal equipment, Electricity. Magnetism. Electrical and magnetic measurements, Applications of information technology, Tobacco, tobacco products and related equipment, Coals, Medical equipment, Thermodynamics and temperature measurements, Semiconductor devices, Earthworks. Excavations. Foundation construction. Underground works, Radiocommunications, Road vehicles in general, Radiation measurements, Woodworking equipment, Protection against fire, Rubber, Wastes, Special measuring equipment for use in telecommunications, Lubricants, industrial oils and related products, Air quality, Measurement of volume, mass, density, viscosity, Cereals, pulses and derived products, Protection of and in buildings, Acoustics and acoustic measurements, Burners. Boilers, Milk and milk products.


SCC, Flammability detector verification

Korean Agency for Technology and Standards (KATS), Flammability detector verification

  • KS E 4111-2013 INTERFEROMETER TYPE INSTRUMENTAL GAS DETECTOR FOR INFLAMMABLE GAS
  • KS E 4115-2006(2011) Interferometer type gas alarms
  • KS E 4115-1980 Interferometer type gas alarms
  • KS C 6591-2007(2018) Installation, operation and maintenance of combustible gas detection instruments
  • KS C 6591-2023 Installation, operation and maintenance of combustible gas detection instruments
  • KS C 6599-2023 Installation, operation and maintenance of combustible gases detection instruments in domestic premises
  • KS C 6599-2007(2018) Installation, operation and maintenance of combustible gases detection instruments in domestic premises
  • KS I 2218-2009 Detector tube type gas measuring instruments
  • KS E 4116-2006(2011) Hot wire type gas alarms
  • KS C 6566-2002(2022) Gas sensors for detecting flammable gas
  • KS C 6566-2002(2017) Gas sensors for detecting flammable gas
  • KS C 6566-2022 Gas sensors for detecting flammable gas
  • KS C 6591-2007 Installation, operation and maintenance of combustible gas detection instruments
  • KS B 4411-2020 Double sizers — Test and inspection methods
  • KS M ISO 18898:2010 Rubber-Calibration and verification of hardness testers
  • KS C IEC 61779-6:2003 Electrical apparatus for the detection and measurement of flammable gases－Part 6：Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
  • KS C IEC 61779-6-2003(2018) Electrical devices for combustible gas detection and measurement - Part 6 Guidelines for selection, installation, use and maintenance of devices
  • KS Q ISO 11843-4-2009(2019) Capability of detection－Part 4：Methodology for comparing the minimum detectable value with a given value

National Metrological Verification Regulations of the People's Republic of China, Flammability detector verification

Henan Provincial Standard of the People's Republic of China, Flammability detector verification

未注明发布机构, Flammability detector verification

  • ANSI/ISA TR92.06.03-2008(2013) Feasibility of Chlorine Detection Instrument Testing
  • ANSI/ISA RP12.13.02-2003 Recommended Practice for the Installation, Operation, and Maintenance of Combustible Gas Detection Instruments
  • ANSI/ISA TR12.13.03-2009 Guide for Combustible Gas Detection as a Method of Protection
  • DIN 51773 E:2009-05 Testing of liquid fuels - Determination of ignition quality (cetane number) of Diesel fuels with the BASF-engine
  • ASTM RR-D02-1675 2009 D7112-Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
  • GJB 7563-2012 Calibration procedures for comprehensive wireless communication testers
  • DIN EN 14624 E:2003-04 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
  • DIN EN 14624 E:2018-09 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
  • DIN 51402-1 E:2019-07 Testing of flue gases of oil burning systems; visual and photometric determination of the smoke number

工业和信息化部, Flammability detector verification

  • JB/T 13937-2020 Non-destructive testing instrument laser ultrasonic visual detector

Association Francaise de Normalisation, Flammability detector verification

  • NF C23-541-2:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 2 : performance requirements for apparatus for the detection of combustible gases.
  • NF A09-320-1:2010 Non-destructive testing - Characterization and verification of ultrasonic testing equipment - Part 1 : instruments.
  • NF C23-570:2007 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen.
  • NF C23-570*NF EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
  • NF C23-558:1992 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent (V/V) gas.
  • NF EN 54-22/IN1:2020 Fire detection and alarm systems - Part 22: resettable linear type heat detectors
  • NF EN 54-22+A1:2020 Fire detection and alarm systems - Part 22: resettable linear type heat detectors
  • NF E35-422*NF EN 14624:2020 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
  • NF C23-557:1992 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent lower explosive limit.
  • NF A09-320-2:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2 : probes.
  • NF EN 14624:2020 Performance of portable leak detectors and fixed gas detectors for all refrigerants
  • NF A09-321:1988 Non destructive testing. Ultrasonic testing. Methods for specifying ultrasonic apparatus.

British Standards Institution (BSI), Flammability detector verification

  • BS EN 50241-2:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Performance requirements for apparatus for the detection of combustible gases
  • BS 6020-1:1981 Instruments for the detection of combustible gases - Specification for general requirements and test methods
  • BS 6020-5:1982 Instruments for the detection of combustible gases - Specification for performance requirements for Group II instruments reading up to 100% gas
  • BS 6020-4:1981 Instruments for the detection of combustible gases - Specification for performance requirements for Group II instruments reading up to 100% lower explosive limit
  • BS 6020-3:1982 Instruments for the detection of combustible gases - Specification for safety and performance requirements for Group I instruments reading up to 100% methane
  • BS ISO 18898:2012 Rubber. Calibration and verification of hardness testers
  • BS ISO 18898:2016 Rubber. Calibration and verification of hardness testers
  • BS 6020-2:1981 Instruments for the detection of combustible gases - Specification for safety and performance requirements for Group I instruments reading up to 5% methane in air
  • BS EN 14624:2020 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
  • BS ISO 11843-4:2003 Capability of detection - Methodology for comparing the minimum detectable value with a given value

ISA - International Society of Automation, Flammability detector verification

KR-KS, Flammability detector verification

  • KS C 6591-2007(2023) Installation, operation and maintenance of combustible gas detection instruments
  • KS C IEC 61779-5-2003(2023) Electrical devices for detecting and measuring combustible gases - Part 5 Performance requirements for Group II devices for detecting combustible gas volume fraction
  • KS C 6599-2007(2023) Installation, operation and maintenance of combustible gases detection instruments in domestic premises
  • KS C IEC 61779-3-2003(2023) Electrical devices for detecting and measuring combustible gases - Part 3 Performance requirements for Group I devices for detecting methane volume fraction
  • KS C IEC 61779-4-2003(2023) Electrical devices for detecting and measuring combustible gases - Part 4 Performance requirements for Group II devices for detecting lower explosion limit volume fraction
  • KS C IEC 61779-2-2003(2023) Electrical devices for detecting and measuring combustible gases - Part 2 Performance requirements for Group I devices for detecting methane volume fraction below 5%

HU-MSZT, Flammability detector verification

  • MSZ 14800/3-1982 Combustion detection. Detection of "difficult to burn" flammable building materials
  • MSZ 18000/9-1971 Brown coal laboratory testing. Flammability rating
  • MSZ 18000/5-1971 Laboratory testing of brown coal. Flammability testing and dust counts
  • MSZ 13556/4-1977 MSZ 13556/4-77 Textile thermal technology and flammability testing, surface flammability testing
  • MSZ 12000/16.lap-1968 Laboratory black coal detection. Fire point detection definition
  • MNOSZ 9472-1952 Wine testing. Titratable acid content detection
  • MSZ 14800/9-1985 Fire detection. Detection and Classification of Flame Expansion Power of Combustible Floor Materials
  • MSZ 108/11-1983 Combustible lime and lime products. Physical testing
  • MSZ 14800/8-1980 MSZ 14800/8-80 fire detection． Flammability testing of plastic structures in the construction industry
  • MSZ KGST 382-1976 MSZ KGST 382-76 fire resistance test. Determination of non-combustible building materials
  • MSZ 14026/7-1973 MI 14026/7-73 Flammability Testing of Rubber Linen Tapes
  • MSZ 09 40041-1977 MSZ-09 40041-77 inspection method. Oxygen flammability determination
  • MSZ 11748/1.lap-1968 Mineral product testing. Definition of detection content of soluble elements in oil
  • MSZ 21456/6-1977 Ammonia content in the definition of air gas pollutant testing
  • MI 18985-1990 Inspection of inspection technology, when the main parameters can be measured
  • MSZ 09 40042-1977 Testing method for determining the ignition point of hard objects
  • MSZ 108/10-1983 MSZ 108/10－83 Combustible lime and lime products. Chemical testing
  • MSZ 11708-1971 Check the definition of engine fuel octane number IT9.6 model testing equipment

American Society for Testing and Materials (ASTM), Flammability detector verification

  • ASTM D7112-09 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
  • ASTM D7112-05 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
  • ASTM D7112-05a Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
  • ASTM E1311-89(2004) Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems

German Institute for Standardization, Flammability detector verification

  • DIN 51853:2011 Testing of fuel gases - Sampling
  • DIN EN 50270:2007 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen; German version EN 50270:2006
  • DIN 18132:2012 Soil, testing procedures and testing equipment - Determination of water absorption
  • DIN 18132:1995 Soil, testing procedures and testing equipment - Determination of water absorption
  • DIN 25456-1:1999 Neutron fluence measurement - Part 1: Fast-neutron fluence determination with activation and fission detectors
  • DIN 51773:1996 Testing of liquid fuels - Determination of ignition quality (cetane number) of Diesel fuels with the BASF-engine
  • DIN 51725:2004 Testing of solid fuels - Determination of the phosphorus content
  • DIN EN 14624:2020 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
  • DIN EN 14624:2020-08 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants; German version EN 14624:2020
  • DIN 51350-2:2010 Testing of lubricants - Testing in the four-ball tester - Part 2: Determination of welding load of liquid lubricants
  • DIN 51350-2:2015 Testing of lubricants - Testing in the four-ball tester - Part 2: Determination of welding load of liquid lubricants
  • DIN 51717:2016 Testing of solid fuels - Determination of mechanical strength of coke
  • DIN 51717:1994 Testing of solid fuels; determination of mechanical strength of coke
  • DIN 51705:2001 Testing of solid fuels - Determination of the bulk density of solid fuels
  • DIN 51444:2020-10 Testing of petroleum products - Determination of nitrogen - Oxidative combustion method with chemiluminescence detector
  • DIN 51350-3:2010 Testing of lubricants - Testing in the four-ball tester - Part 3: Determination of wearing characteristics of liquid lubricants
  • DIN 51350-3:2015 Testing of lubricants - Testing in the four-ball tester - Part 3: Determination of wearing characteristics of liquid lubricants
  • DIN 51350-4:2015 Testing of lubricants - Testing in the four-ball tester - Part 4: Determination of welding load of consistent lubricants
  • DIN EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen; German version EN 50270:2015
  • DIN 51402-1:1986 Testing of flue gases of oil burning systems; visual and photometric determination of the smoke number
  • DIN 51424:1981 Testing of oil fuels; determination of the furfural content of oil fuel

Professional Standard - Coal, Flammability detector verification

  • MT/T 991-2006 The visual examine instrument of the borehole in mine

Japanese Industrial Standards Committee (JISC), Flammability detector verification

Military Standard of the People's Republic of China-General Armament Department, Flammability detector verification

  • GJB 8679-2015 Calibration procedures for propellant constant pressure burning rate instrument
  • GJB 3602A-2015 Error code tester calibration procedures
  • GJB/J 3354-1998 Calibration procedures for stray light coefficient measuring instrument
  • GJB 3354A-2019 Calibration procedures for stray light coefficient measuring instrument
  • GJB/J 3602-1999 Calibration procedures for bit error rate tester
  • GJB/J 3353-1998 Calibration procedures for extinction ratio tester
  • GJB/J 5230-2003 Calibration procedures for smoke density tester
  • GJB/J 3361-1998 Calibration procedures for white light transmittance measuring instrument
  • GJB 5073-2004 Calibration regulations for full-station electronic speed tester
  • GJB 8817-2015 Calibration procedures for wide range digital RLC measuring instruments

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Flammability detector verification

  • GB/T 27669-2011 Non-destructive testing.Ultrasonic inspection.Evaluating electronic characteristics of ultrasonic test instruments
  • GB/Z 41289-2022 Non-destructive testing instruments—Evaluation procedures
  • GB/T 11798.8-2001 Motor vehicle safety testing equipment Technical requirements of verification--Paet 8: Technical requirements of verification of motorcycle wheel deviation tester
  • GB/T 11798.6-2001 Motor vehicle safety testing equipment Technical requirements of verification--Part 6: Technical requirements of verification for symmetrical beam headlamp tester
  • GB/T 11798.7-2001 Motor vehicle safety testing equipment Technical requirements of verification--Part 7: Technical requirements of verification for Axle(Wheel) load scales
  • GB/T 26073-2010 Safety guideline for the evaluation of toxic and flammable gas detection systems

Taiwan Provincial Standard of the People's Republic of China, Flammability detector verification

  • CNS 5242-1980 Interferometer Type Instrumental Gas Detector for Inflammable Gas
  • CNS 11026-1988 Method of test for milk and milk products - Determination of titrable acidity

ZA-SANS, Flammability detector verification

  • SANS 12710:2003 Non-destructive testing - Ultrasonic inspection - Evaluating electronic characteristics of ultrasonic test instruments
  • SANS 61779-6:1999 Electrical apparatus for the detection and measurement of flammable gases Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases

Indonesia Standards, Flammability detector verification

CZ-CSN, Flammability detector verification

Professional Standard - Nuclear Industry, Flammability detector verification

  • EJ/J 1-2007 Verification regulation for gamma-ray logger

Group Standards of the People's Republic of China, Flammability detector verification

  • T/SBX 025-2019 Fixed Gas Detector
  • T/JAS 24-2024 Inspection body and laboratory-Spectification for Verification and Calibration of Instruments and Equipment
  • T/QGCML 3191-2024 Toxic and flammable gas detection system software
  • T/GDCKCJH 047-2021 Performance requirements and test method for mask flame retardant tester
  • T/YSG 001-2022 Specifications for Field Calibration of Combustible Gas Detection and Alarms
  • T/CAS ES380926001-2022 Rules for quality grading and evaluating of industrial products—Online analyzers – Online combustible and toxic gas detector
  • T/QGCML 3136-2024 Fixed gas detection alarm software
  • T/QGCML 3305-2024 Combustible gas alarm detection and calibration analysis system

Professional Standard - Petroleum, Flammability detector verification

  • SY/T 7081-2016 Calibrating method for calibration device of geophone tester
  • SY 7081-2016 Calibration method of calibration device of geophone tester
  • SY 6503-2000 Regulation for using combustible gas detection and alarm instruments

Professional Standard - Military and Civilian Products, Flammability detector verification

  • WJ 2562-2000 Verification Regulations for Red Arrow-8 Tube Mounted Missile Detector
  • WJ 2386-1997 Verification Regulations for Electronic Time Meter
  • WJ 2262-1994 Verification Regulations for Thermal Conductivity Meter
  • WJ 2539-1999 Verification Regulations for Temperature Measuring Diode Meter
  • WJ 2563-2000 Verification Regulations for Low-resistance Detector of Hongjian-8 Missile
  • WJ 2298-1995 CS-244/344 Carbon and Sulfur Meter Verification Regulations
  • WJ 2398-1997 Verification regulations for barrel rifling measuring instrument
  • WJ 2250-1994 Verification Regulations for Activated Carbon Specific Surface Area Meter
  • WJ 2293-1995 Verification rules for microscope temperature platform melting point tester
  • WJ 2276-1995 Verification rules for activated carbon and impregnated carbon particle size analyzer
  • WJ 2282-1995 Verification regulations for protective equipment ventilation resistance tester
  • WJ 2283-1995 Verification rules for activated carbon and impregnated carbon strength tester
  • WJ 2437-1997 TCY low-light objective lens T-number measuring instrument verification regulations
  • WJ 2506-1998 Verification Regulations for Photodiode Dynamic Tester

国家市场监督管理总局、中国国家标准化管理委员会, Flammability detector verification

  • GB/T 37084-2018 General requirement for photoelectric detection instruments reliability

SE-SIS, Flammability detector verification

  • SIS SS-EN 50 055-1992 Electrical apparatusfor the detection and measurement ofcombustible gases - Performance requirements for Group I apparatus indicating upto5% (v/v) methane in air
  • SIS SS 11 49 38-1986 Non-destructive testing — Direct verification of black light sources
  • SIS SS IEC 671:1983 Nuclear instrumentation - Protection system of nuclear reactors - Period/c tests and monitoring
  • SIS SS 11 03 40-1983 Hardness test - Vickers test HV 0,2 to HV100- Direct verification of testing machines
  • SIS SS-EN 50 058-1992 Electrical apparatus for the detection and measurement of combustible gases - Performance requirements for Group II apparatus indicating up to 100 % (v/v) gas
  • SIS SS-EN 50 057-1992 Electrical apparatusfor the detection and measurement of combustible gases - Performance requirements for Group II apparatus indicating up to 100 % lower explosive limit
  • SIS SS-EN 50 056-1992 Electrical apparatus for the detection and measurement of combustible gases — Performance requireménts for Group I apparatus indicating up to 100 % (v/v) methane

Hebei Provincial Standard of the People's Republic of China, Flammability detector verification

  • DB13/T 2518-2017 Specifications for inspection and testing of combustible gas and toxic gas detection and alarm systems in industrial enterprises

Professional Standard - Traffic, Flammability detector verification

  • JT/T 1013-2015 Vehicle fuel consumption instrument based on carbon balance method

Professional Standard - Surveying and Mapping, Flammability detector verification

  • CH 8001-1991 Specification on calibration of electro-optical distance measuring instrument
  • CH 8017-1999 Verification Regulation for the Genaral Accuracy of Aerophotogrammetric Instruments

Professional Standard - Aerospace, Flammability detector verification

Professional Standard - Agriculture, Flammability detector verification

Professional Standard - Electron, Flammability detector verification

  • SJ 20256-1993 Verification regulation of model YH3910 TV field intensity measuring instrument
  • SJ 20262-1993 Verification regulation of model HS6110 electtroacoustic test system
  • SJ 20225-1993 Verification regulation of LF group delay measuring set
  • SJ 20240-1993 Verification regulation of model HP4284A LCR precise measurement instruments
  • SJ 20235-1993 Verification regulation of model IC-1500 automatic tester
  • SJ 20242-1993 Verification regulation of model CC-10 large capacitance measuring instruments
  • SJ 20226-1993 Verification regulation of model 201/2 envelope delay measuring set
  • SJ 20237-1993 Verification regulation of model GH3123 IC automatic tester

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Flammability detector verification

  • GJB/J 5458-2005 Verificationg regulation for burning instrument of target line method of solid propellants
  • GJB/J 5415-2005 Verfication regulation for withstanding voltage tester
  • GJB/J 5412-2005 Verification regulation for wide range digital RLC meter

国家煤矿安全监察局, Flammability detector verification

  • MT/T 1195-2020 Calibration procedures for carbon and hydrogen analyzers in coal

CENELEC - European Committee for Electrotechnical Standardization, Flammability detector verification

  • EN 50073:1999 Guide for Selection@ Installation@ Use and Maintenance of Apparatus for the Detection and Measurement of Combustible Gases or Oxygen
  • EN 50241-2:1999 Specification for Open Path Apparatus for the Detection of Combustible or Toxic Gases and Vapours - Part 2: Performance Requirements for Apparatus for the Detection of Combustible Gases
  • EN 50241-1:1999 Specification for Open Path Apparatus for the Detection of Combustible or Toxic Gases and Vapours@ Part 1: General Requirements and Test Methods

RU-GOST R, Flammability detector verification

  • GOST 8.411-1981 State system for ensuring the uniformity of measurements. Lever microme ters. Rules and procedure of verification
  • GOST 8.331-1999 State system for ensuring the uniformity of measurement. Distortion meters. Methods and means of verification and calibration
  • GOST 8.255-2003 State system for ensuring the uniformity of measurements. Electrical capacity measures. Verification procedure
  • GOST 8.255-1977 State system for ensuring the uniformity of measurements. Capasitance measures. Methods and means of calibration
  • GOST ISO 11843-4-2005 Statistical methods. Capability of detection. Methodology for comparing the minimum detectable value with a given value
  • GOST 8.154-1975 State system for ensuring the uniformity of measurements. "Artifical ear"-type measuring instruments. Methods and means of verification
  • GOST 8.518-1984 State system for ensuring the uniformity of measurements. Ferritometers for austenite steel. Methods of verification
  • GOST 8.493-1983 State system for ensuring the uniformity of measurements. Coaxial impedance meters. Methods and means of verification

Professional Standard - Electricity, Flammability detector verification

  • DL/T 1473-2016 Verification Regulations for Electrical Measuring and Indicating Instruments
  • DL/T 1028-2006 Verification code for power quality analyzer
  • DL/T 2350-2021 Technical specification for voltage monitor verification device
  • DL/T 967-2005 Verification regulation of loop resistance tester and DC resistance high-speed tester

Professional Standard - Navy, Flammability detector verification

  • HJB 448.2-2009 Verification regulation for torpedo testing equipments of Yu-3BG.Part 2:Sensitive meter test set
  • HJB 449.5-2009 Verification regulation for torpedo testing equipments of H/YZQ-006.Part 5:Submerge torpedo detector
  • HJB 249.15-2001 Verification regulations for special test equipment for torpedoes Verification regulations for special test equipment for fish 3B SB203.90TS
  • HJB 249.12-2001 Verification regulations for special test equipment for torpedoes Verification regulations for special test equipment for fish 3B SB203.00ⅢTS1 Warhead circuit inspection instrument
  • HJB 249.1-2001 Verification regulations for special test equipment for torpedoes Verification regulations for special test equipment for fish 3B SB2038.40TS3 Sensitive instrument test bench for control system

National Metrological Technical Specifications of the People's Republic of China, Flammability detector verification

Standard Association of Australia （SAA）, Flammability detector verification

  • AS/NZS 61779.6:2000 Electrical apparatus for the detection and measurement of flammable gases Part 6: Guide for the selection,installation,use and maintenance of apparatus for the detection and measurement of flammable gases
  • AS 26142:2020 Hydrogen detection apparatus — Stationary applications (ISO 26142:2010 (ED 1.0) MOD)

GSO, Flammability detector verification

  • GSO ISO 16831:2015 Non-destructive testing -- Ultrasonic testing -- Characterization and verification of ultrasonic thickness measuring equipment
  • GSO ISO 11843-4:2010 Capability of detection -- Part 4: Methodology for comparing the minimum detectable value with a given value

International Organization for Standardization (ISO), Flammability detector verification

  • ISO 18898:2016 Rubber - Calibration and verification of hardness testers
  • ISO 18898:2012 Rubber - Calibration and verification of hardness testers

Professional Standard - Radio Television Film, Flammability detector verification

  • GY 22-1984 Verification Method of RC-1 Field Strength Meter

Professional Standard - Machinery, Flammability detector verification

  • JB/T 9394-2011 Non-destructive testing instruments.Specifications for the X-ray stressometers
  • JB/T 11602.3-2013 Non-desturctive testing instruments.Measurement and evaluation of the X-ray tube voltage.Part 3: Spectrometric detect

AT-ON, Flammability detector verification

ES-UNE, Flammability detector verification

  • UNE-EN 14624:2021 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants

International Electrotechnical Commission (IEC), Flammability detector verification

  • IEC 61779-6:1999 Electrical apparatus for the detection and measurement of flammable gases - Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases

Professional Standard - Grain, Flammability detector verification

  • LS/T 1215-2008 Technical specification for calibrating wheat hardness index tester

机械工业部, Flammability detector verification

  • JB/T 7395.5-1994 Electrical measuring instruments terminology standard, detector, stable power supply and comparative measuring instrument

Professional Standard - Earthquake, Flammability detector verification

  • DB/T 28-2008 Calibration code of measuring instruments for magnetic induction of low field

European Committee for Standardization (CEN), Flammability detector verification

  • EN 50054:1998 Electrical Apparatus for the Detection and Measurement of Combustible Gases - General Requirements and Test Methods

Heilongjiang Provincial Standard of the People's Republic of China, Flammability detector verification

  • DB23/T 1802-2016 Technical specification for detection of combustible gas and toxic gas alarm system

  Combustible gas detector, Gas detector verification, Gas detector verification, Flammability detector, Flammability detector, On-site testing instrument verification, Combustible gas detection instrument, Verification Regulations for Formaldehyde Detector, UV detector verification, Combustible gas detector use, Combustible gas detector method, Formaldehyde detector verification, Gas detector verification, Gas detector verification, Environmental combustible gas detector, Flammability detector installation, Gas detector verification basis, Flammability detector verification, Verification Regulations for Hydrogen Detector, Multi-gas detector verification.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved