ZH
RU
ES

How to use semi-prepared

How to use semi-prepared, Total:499 items.

In the international standard classification, How to use semi-prepared involves: Electronic display devices, Kitchen equipment, Surface treatment and coating, Semiconductor devices, Graphic technology, Organic chemicals, Printed circuits and boards, Optics and optical measurements, Analytical chemistry, Products of the chemical industry, Meat, meat products and other animal produce, Fruits. Vegetables, Road engineering, Protective equipment, Metalliferous minerals, Fuels, Tea. Coffee. Cocoa, Sensory analysis, Water quality, Petroleum products in general, Protection against crime, Rubber, Nuclear energy engineering, Earth-moving machinery, Semi-manufactures of timber, Coals, Quality, Aircraft and space vehicles in general, Road vehicle systems, Insulation, Optoelectronics. Laser equipment, Radiocommunications, Protection against dangerous goods, Soil quality. Pedology, Solar energy engineering, Railway rolling stock, Electric traction equipment, Plastics, Protection against fire, IT terminal and other peripheral equipment, Construction materials, Rubber and plastics products, Microbiology, Environmental protection, Acoustics and acoustic measurements, Testing of metals, Wastes, Installations in buildings, Paper and board, Sports equipment and facilities, Milk and milk products, Road vehicles in general, Welding, brazing and soldering, Mining and quarrying, Refractories, Medical equipment, Law. Administration, Elements of buildings, Measurement of fluid flow, Thermodynamics and temperature measurements, Non-ferrous metals, Linear and angular measurements, Technical drawings, Products of the textile industry, Electromechanical components for electronic and telecommunications equipment, Document imaging applications, Mechanical structures for electronic equipment, Ferrous metals, Reinforced plastics, Materials for aerospace construction, Aids for disabled or handicapped persons, Lubricants, industrial oils and related products, Pulps, Electrical equipment for working in special conditions, Explosion protection, Domestic, commercial and industrial heating appliances, Construction of railways, Furniture, Ferroalloys, Chipless working equipment, Inorganic chemicals, Textile fibres, Radiation measurements, Telecommunication terminal equipment, Tobacco, tobacco products and related equipment, Protection of and in buildings, Energy and heat transfer engineering in general, Electrical wires and cables, Raw materials for rubber and plastics, Electromagnetic compatibility (EMC), Fertilizers.

Building Officials and Code Administrators International(U.S.), How to use semi-prepared

BOCA ARTICLE 18 NFPC COMM-1990 Semiconductor Fabrication Facilities Using Hazardous Production Materials
BOCA ARTICLE 18 NFPC-1990 Semiconductor Fabrication Facilities Using Hazardous Production Materials Eighth Edition

RU-GOST R, How to use semi-prepared

GOST 30204-1995 Household electrical refrigerating appliances. Performance and test methods
GOST 30587-1998 Electrically operated household food preparation appliances. Measuring methods of operating characteristics
GOST R 50396.0-2013 Poultry meat, edible offal and semi-prepared products from poultry meat. Sampling methods and preparing for microbiological examinations
PNST 121-2016 Automobile roads of general use. The mineral materials for the preparation of asphalt mixtures. Method of sampling
GOST 26378.0-2015 Used petroleum products. General requirements for the method of the tests
GOST R 52745-2007 Complex quality control system. Quality control for materials and semi-finished products used in the process of production of articles of aviation, space and defence equipment and double application equipment at enterprises-suppliers. General requirements
GOST R 52745-2021 Complex quality control system. Conformity assessment of materials, semi-finished products and other products used in the process of manufacture of products for aircraft and other civil, defense and dual use equipment at enterprises-suppliers. General req
GOST R 50289-1992 Hollow insulators for use in electrical equipment. Test methods
GOST 26378.1-2015 Used petroleum products. Method for determination of water
GOST 26378.3-2015 Used petroleum products. Method for determination of relative viscosity
PNST 122-2016 Automobile roads of general use. Mineral materials for preparing asphalt mixtures. Method for determination of Rigden voids in mineral powder
GOST R 51448-1999 Meat and meat products. Methods of test samples preparation for microbiological examination
GOST R 57010-2016 General requirements for method of preparation of highly mineralized coal dust for analysis
PNST 124-2016 Automobile roads of general use. The mineral materials for the preparation of asphalt mixtures. Method for determination of bulk density and the emptiness
GOST 33632-2015 Milk fat, butter and butter paste made from cow milk. Control methods sensory characteristics
GOST EN 14707-2011 Thermal insulating products for buildings equipment and industrial installations. Method for determination of maximum service temperature for preformed pipe insulation
GOST 4212-2016 Reagents. Methods for preparation of solutions for colorimetric and nephelometric analysis
GOST 4517-2016 Reagents. Methods for preparation of accessory reagents and solutions used for analysis
GOST 4517-1987 Reagents. Methods for preparation of accessory reagents and solutions used for analysis
GOST 4212-1976 Reagents. Methods for preparation of solutions for colorimetric and nephelometric analysis
GOST 25794.1-1983 Reagents. Methods of preparation of standard volumetric solutions for acid-base titration
GOST 27637-1988 Semi-finished products of wrought aluminium thermo-hardened alloys. Control of microstructure for presence of overburning by metalographic method
GOST 26378.4-2015 Used petroleum products. Method for determination of flash point in open cup
GOST 26277-1984 Plastics. Preparation of test specimens by machining
PNST 123-2016 Automobile roads of general use. The mineral materials for the preparation of asphalt mixtures. Method for determination of loss of mass under the action of sodium sulfate or magnesium sulfate
GOST 20515-1975 Aluminium thermal treated ferromobium. Sampling method and sample preparation for chemikal analysis
GOST 23408-1978 Moulding and core sands. Methods of sampling and sample preparation
GOST 25794.2-1983 Reagents. Methods for preparation of standard volumetric solutions for redox titration
GOST 26378.2-2015 Used petroleum products. Method for determination of mechanical impurities and contaminants
GOST 32312-2011 Thermal insulating products for engineering equipment and industrial installations. Method for determination of maximum service temperature
GOST R 55816-2013 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
GOST 25794.3-1983 Reagents. Methods of preparation of standard volumetric solutions for precipitation titration, non-aqueous titration and other titrimetric methods
GOST 2189-1978 Foundry sands. Reception rules. Methods of sampling and sample preparation for testing
GOST ISO 23529-2013 Rubber. General procedures for preparing and conditioning test pieces for physicaltest methods
GOST R 55361-2012 Milk fat, butter and butter paste made from cow milk. The rules of tests acceptance, sampling and control methods
GOST R 51317.6.4-2009 Electromagnetic compatibility of technical equipment. Electromagnetic disturbance from technical equipment intended for use in industry environments. Limits and test methods
GOST R 51317.6.4-1999 Electromagnetic compatibility of technical equipment. Emission from technical equipment intended for use in industry environments. Limits and test methods

SAE - SAE International, How to use semi-prepared

SAE EIA-4900-2016 Use of Semiconductor Devices Outside Manufacturers' Specified Temperature Ranges

British Standards Institution (BSI), How to use semi-prepared

BS EN ISO 8504-1:2000 Preparation of steel substrates before application of paints and related products. Surface preparation methods. General principles
BS EN ISO 8504-1:2001 Preparation of steel substrates before application of paints and related products - Surface preparation methods - General principles
BS EN ISO 8504-2:2001 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast cleaning
BS EN ISO 8504-2:2000 Preparation of steel substrates before application of paints and related products. Surface preparation methods. Abrasive blast cleaning
BS ISO 20720:2018 Microbeam analysis. Methods of specimen preparation for analysis of general powders using WDS and EDS
PD ISO/TS 9516-4:2021 Iron ores. Determination of various elements by X-ray fluorescence spectrometry. Performance-based method using fusion preparation method
BS EN ISO 6145-1:2019 Gas analysis. Preparation of calibration gas mixtures using dynamic methods - General aspects
BS EN 381-10:2002 Protective clothing for users of hand-held chain saws - Test method for upper body protectors
BS 6008:1980 Method for preparation of a liquor of tea for use in sensory tests
BS EN ISO 8504-3:2001 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Hand- and power-tool cleaning
BS EN ISO 8504-3:1993 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Hand- and power-tool cleaning
BS EN 17352:2022 Power operated pedestrian entrance control equipment. Safety in use. Requirements and test methods
BS EN 60749-37:2008 Semiconductor devices — Mechanical and climatic test methods — Part 37: Board level drop test method using an accelerometer
BS 4559-4:2000 Methods for preparation of calibration gas mixtures - Certificate of mixture preparation
BS PD CEN/TR 16816:2015 End use performance of wood products. Utilisation and improvement of existing methods to estimate service life
BS EN ISO 7539-5:1995 Corrosion of metals and alloys. Stress corrosion testing. Method for the preparation and use of C-ring specimens
BS EN IEC 62969-2:2018 Semiconductor devices. Semiconductor interface for automotive vehicles - Efficiency evaluation methods of wireless power transmission using resonance for automotive vehicles sensors
BS EN 13880-6:2004 Hot applied joint sealants - Method for the preparation of samples for testing
BS EN ISO 11348-1:2008+A1:2018 Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Method using freshly prepared bacteria
BS EN 60510-2-5:1996 Methods of measurement for radio equipment used in satellite earth stations. Measurements for sub-systems. Frequency modulators
BS M 34:1970 Method of preparation and use of radiographic techniques
BS EN IEC 60749-37:2022 Tracked Changes. Semiconductor devices. Mechanical and climatic test methods. Board level drop test method using an accelerometer
19/30386969 DC BS EN 17352. Power operated pedestrian entrance control equipment. Safety in use. Requirements and test methods
BS EN ISO 11468:2000 Plastics - Preparation of PVC pastes for test purposes - Dissolver method
BS EN ISO 11468:1998 Plastics. Preparation of PVC pastes for test purposes. Dissolver method
BS EN ISO 11393-6:2019 Protective clothing for users of hand-held chainsaws - Performance requirements and test methods for upper body protectors
BS EN ISO 6145-6:2017 Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Critical flow orifices
BS 7079-D1:2000 Preparation of steel substrates before application of paints and related products. Methods for surface preparation. General principles
BS 6043-4.1:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Methods of sampling
BS 6563:1985 Method for determination of the roughness of paper and board by the Parker Print-surf apparatus
BS 7079-B8:2001 Preparation of steel substrates before application of paints and related products - Methods for the assessment of surface cleanliness - Field method for the refractometric determination of moisture
BS IEC 62629-12-1:2014 3D Display devices. Measuring methods for stereoscopic displays using glasses. Optical
BS EN ISO 6145-7:2018 Tracked Changes. Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Thermal mass-flow controllers
BS EN ISO 8502-9:2001 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Field method for the conductometric determination of water-soluble salts
BS EN ISO 8502-9:1998 Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Field method for the conductometric determination of water-soluble salts
BS EN 62047-12:2011 Semiconductor devices. Micro-electromechanical devices. Bending fatigue testing method of thin film materials using resonant vibration of MEMS structures
BS ISO 14648-2:2001 Micrographics. Quality control of COM recorders that generate images using a single internal display system - Method of use
20/30425836 DC BS EN IEC 60749-37. Semiconductor devices. Mechanical and climatic test methods. Part 37. Board level drop test method using an accelerometer
BS ISO 1268-1:2002 Fibre-reinforced plastics - Methods of producing test plates - General conditions
BS EN 15312:2007 Free access multi-sports equipment - Requirements, including safety, and test methods
BS EN IEC 61010-2-120:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular safety requirements for machinery aspects of equipment
BS IEC 62629-12-2:2019 3D display devices - Measuring methods for stereoscopic displays using glasses. Motion blur
BS EN ISO 5269-2:2004 Pulps. Preparation of laboratory sheets for physical testing - Rapid-Koethen method
BS EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
BS EN 60510-3-4:1996 Methods of measurement for radio equipment used in satellite earth stations. Methods of measurement on combinations of sub-systems. Measurements for frequency division multiplex (f.d.m.) transmission
BS EN 14459:2015 Safety and control devices for burners and appliances burning gaseous or liquid fuels. Control functions in electronic systems. Methods for classification and assessment
BS EN 14459:2021 Safety and control devices for burners and appliances burning gaseous or liquid fuels. Control functions in electronic systems. Methods for classification and assessment
BS EN 15312:2007+A1:2010 Free access multi-sports equipment. Requirements, including safety, and test methods
BS EN ISO 4612:1999 Plastics - Preparation of PVC pastes for test purposes - Planetary-mixer method
BS 6043-2.1:1985 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Sampling
BS EN 14278-1:2005 Textiles - Determination of cotton fibre stickiness - Method using a manual theromodetection device
BS EN 14278-1:2004 Textiles-Determination of cotton fibre stickiness-Part 1:Method using a manual thermodetection device
DD IEC/PAS 62437:2005 Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices. Limits and methods of measurement. Specifications for active antennas
BS 6043-2-18:2001 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of total sulfur by the Eschka method
18/30363265 DC BS EN 61010-2-081. Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-081. Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
BS ISO 21766:2018 Tobacco and tobacco products. Determination of tobacco-specific nitrosamines in tobacco products. Method using LC-MS/MS
BS ISO 21766:2021 Tobacco and tobacco products. Determination of tobacco-specific nitrosamines in tobacco products. Method using LC-MS/MS
BS PD CEN/TR 16663:2014 Durability of wood and wood-based products. Determination of emissions from preservative treated wood to the environment. Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground). Semi-field method
BS PD CEN/TS 16663:2016 Durability of wood and wood-based products. Determination of emissions from preservative treated wood to the environment. Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground). Semi-field method
BS IEC 62629-13-1:2017 3D display devices - Visual inspection methods for stereoscopic displays using glasses. Ghost image
BS EN 17090:2018 Fertilizers. Determination of nitrification inhibitor DMPSA in fertilizers. Method using high-performance liquid chromatography (HPLC)

Association Francaise de Normalisation, How to use semi-prepared

NF EN ISO 11468:1999 Plastiques - Préparation des pâtes PVC pour essai - Méthode utilisant un dispositif pour dissolution
NF EN ISO 4612:2018 Plastiques - Préparation des pâtes PVC pour essais - Méthodes utilisant un mélangeur planétaire
NF T35-504-1:2001 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1 : general principles.
NF T35-504-2:2001 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2 : abrasive blast-cleaning.
NF EN ISO 6145-1:2019 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes dynamiques - Partie 1 : aspects généraux
NF P25-496*NF EN 17352:2022 Power operated pedestrian entrance control equipment - Safety in use - Requirements and test methods
NF EN 17352:2022 Équipement motorisé de contrôle d'accès pour piétons - Sécurité d'utilisation - Exigences et méthodes d'essai
NF ISO 2591-1:1989 Tamisage de contrôle - Modes opératoires utilisant des tamis de contrôle en tissus métalliques et en tôles métalliques perforées
NF EN 60619/A1:1996 Appareils électriques pour la préparation de la nourriture - Méthodes de mesure.
NF EN 60619:1993 Appareils électriques pour la préparation de la nourriture - Méthodes de mesure.
NF A08-300:1989 Steel and Iron - Recommendations for the preparation and the use of standard method of analysis using flame atomic absorption spectrometry
FD CEN/TR 16816:2015 Performances des produits en bois dans leur emploi - Utilisation et amélioration des méthodes existantes pour estimer la durée de vie
NF T35-504-3:2001 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3 : hand- and power-tool cleaning.
NF C96-022-37*NF EN 60749-37:2008 Semiconductor devices - Mechanical and climatic test methods - Part 37 : board level drop test method using an accelerometer
NF C96-022-40*NF EN 60749-40:2012 Semiconductor devices - Mechanical and climatic test methods - Part 40 : board level drop test method using a strain gauge
NF EN 60749-40:2012 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 40 : méthode d'essai de chute au niveau de la carte avec utilisation d'une jauge de contrainte
NF E35-421:2022 Systèmes de réfrigération et pompes à chaleur - Méthode d'essai des matériels de récupération, de recyclage et de régénération des fluides frigorigènes utilisés dans les systèmes frigorifiques et les pompes à chaleur
FD B51-203*FD CEN/TR 16816:2015 End use performance of wood products - Utilisation and improvement of existing methods to estimate service life
NF EN ISO 6145-7:2018 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes dynamiques - Partie 7 : régulateurs thermiques de débit massique
NF EN IEC 60749-37:2022 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 37 : Méthode d'essai de chute au niveau de la carte avec utilisation d'un accéléromètre
NF Q61-002:1981 Technologie graphique - Méthode de détermination de l'aptitude à l'impression hélio avec le dispositif "héliotest".
NF P98-818-30:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 30 : specimen preparation by impact compactor.
NF C96-069-2*NF EN IEC 62969-2:2018 Semiconductor devices - Semiconductor interface for automotive vehicles - Part 2 : efficiency evaluation methods of wireless power transmission using resonance for automotive vehicles sensors
NF EN 16256-5:2013 Articles pyrotechniques - Articles pyrotechniques destinés au théâtre - Partie 5 : méthodes d'essai
NF C96-013-6-3*NF EN 60191-6-3:2001 Mechnical standardization of semiconductor devices - Part 6-3 : general rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of quad flat packs (QFP)
NF EN 12697-33/IN1:2022 Mélanges bitumineux - Méthodes d'essai - Partie 33 : Préparation de corps d'épreuve au compacteur de plaque
NF EN 12697-33+A1:2022 Mélanges bitumineux - Méthodes d'essai - Partie 33 : Préparation de corps d'épreuve au compacteur de plaque
NF EN ISO 11348-1/A1:2018 Qualité de l'eau - Détermination de l'effet inhibiteur d'échantillons d'eau sur la luminescence de Vibrio fischeri (Essai de bactéries luminescentes) - Partie 1 : méthode utilisant des bactéries fraîchement préparées - Amendement 1
NF EN ISO 11348-1:2009 Qualité de l'eau - Détermination de l'effet inhibiteur d'échantillons d'eau sur la luminescence de Vibrio fischeri (Essai de bactéries luminescentes) - Partie 1 : méthode utilisant des bactéries fraîchement préparées
NF P98-622:1991 Horizontal road marking. Markings applied on the roads. Analysis of binders by semi-preparative gel adsorption chromatography.
NF EN 62276:2018 Tranches monocristallines pour applications utilisant des dispositifs à ondes acoustiques de surface (OAS) - Spécifications et méthodes de mesure
NF EN ISO 6145-11:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 11 : génération électrochimique
NF T76-142*NF T 76-142:2021 Structural adhesives - Preparation method of structural adhesive plates for characterization test pieces
NF S52-108*NF EN 15312+A1:2010 Free access multi-sports equipment - Requirements, including safety, and test methods
NF S52-108/IN1*NF EN 15312/IN1:2010 Free access multi-sports equipment - Requirements, including safety, and test methods
FD CEN/TR 10377:2023 Lignes directrices pour la préparation de méthodes de routine utilisant la spectrométrie de fluorescence X à dispersion de longueur d'onde
NF EN ISO 6145-8:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 8 : méthode par diffusion
NF EN ISO 6145-9:2011 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 9 : méthode par saturation
NF EN ISO 6145-10:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 10 : méthode par perméation
NF EN ISO 6145-6:2017 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 6 : orifices de débit critiques
NF EN IEC 60749-39:2022 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 39 : mesure de la diffusivité d'humidité et de l'hydrosolubilité dans les matériaux organiques utilisés dans les composants à semiconducteurs
NF S52-108:2007 Free access multi-sports equipment - Requirements, including safety, and test methods.
NF X20-205-6*NF EN ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6 : critical flow orifices
NF EN ISO 11393-6:2019 Vêtements de protection pour utilisateurs de scies à chaîne tenues à la main - Partie 6 : exigences de performance et méthodes d'essai pour protecteurs du haut du corps
NF P98-880-6:2004 Hot applied joint sealants - Part 6 : test method for the preparation of samples for testing.
NF T35-507-1:1997 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Part 1 : sampling.
NF EN 50561-1:2014 Appareils de communication par courant porteur utilisés dans les installations basse tension - Caractéristiques de perturbations radioélectriques - Limites et méthodes de mesure - Partie 1 : appareillage pour usage intérieur
NF EN 62490-1:2011 Méthode de mesure de l'ESL - Partie 1 : condensateurs à bornes de sortie utilisés dans les équipements électroniques
NF EN IEC 63002:2021 Spécifications d'interopérabilité et méthode de communication pour les alimentations externes utilisées avec les dispositifs informatiques et les dispositifs électroniques grand public
NF T51-770:1999 Plastics - Preparation of PVC pastes for test purposes - Planetary-mixer method.
NF S66-701*NF EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
NF EN 50561-3:2016 Appareils de communication par courant porteur utilisés dans les installations basse tension - Caractéristiques de perturbations radioélectriques - Limites et méthodes de mesure - Partie 3 : appareillage fonctionnant au-dessus de 30 MHz
NF EN 62490-2:2011 Méthode de mesure de l'ESL - Partie 2 : condensateurs pour montage en surface utilisés dans les équipements électroniques
NF EN ISO 6145-5:2011 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 5 : dispositifs d'étalonnage par capillaires
NF V37-206*NF ISO 21766:2019 Tobacco and tobacco products - Determination of tobacco-specific nitrosamines in tobacco products - Method using LC-MS/MS
NF C32-021:1985 Insulated cables and flexible cords for installations. Test methods for cables and cords used under special conditions.
NF T35-507-3:1997 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Part 3 : determination of hardness.
NF T90-205*NF EN ISO 27108:2013 Water quality - Determination of selected plant treatment agents and biocide products - Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS)
NF T 76-142:2021 Adhésifs structuraux - Méthode de préparation de plaques d'adhésifs structuraux pour la réalisation d'éprouvettes d'essai de caractérisation
NF S74-603*NF ISO 17493:2017 Clothing and equipment for protection against heat - Test method for convective heat resistance using a hot air circulating oven
NF C96-050-12*NF EN 62047-12:2012 Semiconductor devices - Micro-electromechanical devices - Part 12 : bending fatigue testing method of thin film materials using resonant vibration of MEMS structures.

IEC - International Electrotechnical Commission, How to use semi-prepared

PAS 62240-2001 Use of Semiconductor Devices Outside Manufacturer's Specified Temperature Ranges (Edition 1.0)
PAS 62437-2005 Radio disturbance characteristics for the protection of receivers used on board vehicles@ boats@ and on devices Limits and methods of measurement Specifications for active antennas (Edition 1.0)

Universal Oil Products Company (UOP), How to use semi-prepared

UOP 947-1996 LENGTH AND DIAMETER OF EXTRUDED CATALYST USING A SEMI-AUTOMATED METHOD
UOP 947-2015 Length and Diameter of Extruded Catalyst Using a Semi-Automated Method

American Society for Testing and Materials (ASTM), How to use semi-prepared

ASTM UOP947-96 Length and Diameter of Extruded Catalyst Using a Semi-Automated Method
ASTM F1318-90(2003) Standard Test Method for Determination of Productivity Using Electrostatic Copy Machines with Various Configurations
ASTM E1348-90(1996) Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E1348-15e1 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM F1318-90(1998) Standard Test Method for Determination of Productivity Using Electrostatic Copy Machines with Various Configurations
ASTM F1318-90(2009) Standard Test Method for Determination of Productivity Using Electrostatic Copy Machines with Various Configurations
ASTM D2013-72 Standard Method Of Preparing Coal Samples For Analysis
ASTM D3975-93(1999) Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
ASTM C1110-03(2008) Standard Practice for Sample Preparation for X-Ray Emission Spectrometric Analysis of Uranium in Ores Using the Glass Fusion or Pressed Powder Method
ASTM D3975-93(2019) Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
ASTM D2013/D2013M-09 Standard Practice for Preparing Coal Samples for Analysis
ASTM E1348-11 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E1382-97(2023) Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
ASTM E1348-15 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E434-10(2020) Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
ASTM E434-71(2002) Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
ASTM D7454-19 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM E2435-05 Standard Guide for Application of Engineering Controls to Facilitate Use or Redevelopment of Chemical-Affected Properties
ASTM E82-91(2001) Standard Test Method for Determining the Orientation of a Metal Crystal
ASTM E829-94 Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis
ASTM D7454-08 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D7454-14e1 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM C879-03 Standard Test Methods for Release Papers Used With Preformed Tape Sealants
ASTM C879-03(2009) Standard Test Methods for Release Papers Used With Preformed Tape Sealants
ASTM C879-03(2014) Standard Test Methods for Release Papers Used with Preformed Tape Sealants
ASTM D3278-96e1 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
ASTM E1155M-96(2001) Standard Test Method for Determining F_F Floor Flatness and F_L Floor Levelness Numbers [Metric]
ASTM D8079-16 Standard Practice for Preparation of Compacted Slab Asphalt Mix Samples Using a Segmented Rolling Compactor
ASTM G99-03 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM E1331-96(2003) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
ASTM D1425/D1425M-14(2020) Standard Test Method for Evenness of Textile Strands Using Capacitance Testing Equipment
ASTM E434-10(2015) Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
ASTM C1176/C1176M-08 Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
ASTM D1425/D1425M-14 Standard Test Method for Evenness of Textile Strands Using Capacitance Testing Equipment
ASTM F1446-06 Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
ASTM F1446-05 Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
ASTM F1446-08 Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
ASTM D3342-22 Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water
ASTM C796/C796M-19 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
ASTM D5120-90(1995)e1 Standard Test Method for Inhibition of Respiration in Microbial Cultures in the Activated Sludge Process
ASTM D5384-14 Standard Test Methods for Chlorine in Used Petroleum Products 40;Field Test Kit Method41;
ASTM E502-07 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM D3496-99(2005) Standard Practice for Preparation of Bituminous Mixture Specimens for Dynamic Modulus Testing
ASTM E2895-13 Standard Test Method for Producing High Titers of Viable and Semi-Purified Spores of Clostridium difficile using a Liquid Medium
ASTM D3342-90(2012) Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water
ASTM E2232-10 Standard Guide for Selection and Use of Mathematical Methods for Calculating Absorbed Dose in Radiation Processing Applications
ASTM D8044-23 Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance Using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures
ASTM D8044-16 Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures
ASTM D5277-92(1997) Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
ASTM C1110-88(1997)e1 Standard Practice for Sample Preparation for X-Ray Emission Spectrometric Analysis of Uranium in Ores Using the Glass Fusion or Pressed Powder Method
ASTM D7972-14(2020) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
ASTM C796-04 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
ASTM C796-97 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
ASTM E2602-09(2015) Standard Test Methods for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
ASTM D5712-05 Standard Test Method for Analysis of Aqueous Extractable Protein in Natural Rubber and Its Products Using the Modified Lowry Method
ASTM E1155-96(2008) Standard Test Method for Determining F_F Floor Flatness and F_L Floor Levelness Numbers
ASTM E303-93(2018) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM F1446-15 Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear

International Organization for Standardization (ISO), How to use semi-prepared

ISO 8504-1:1992 Preparation of steel substrates before application of paints and related products; surface preparation methods; part 1: general principles
ISO 8504-4:2022 Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 4: Acid pickling
ISO 8504-2:1992 Preparation of steel substrates before application of paints and related products; surface preparation methods; part 2: abrasive blast-cleaning
ISO 20720:2018 Microbeam analysis - Methods of specimen preparation for analysis of general powders using WDS and EDS
ISO 2267:1979 Surface active agents — Evaluation of certain effects of laundering — Methods of preparation and use of unsoiled cotton control cloth
ISO 2267:1972 Title missing - Legacy paper document
ISO 2267:1986 Surface active agents; Evaluation of certain effects of laundering; Methods of preparation and use of unsoiled cotton control cloth
ISO/TR 22770:2019 Preparation of steel substrates before application of paints and related products — Analytical colorimetry method to support visual assessment of surface preparation grades
ISO 11348-1:2007/Amd 1:2018 Water quality — Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) — Part 1: Method using freshly prepared bacteria — Amendmen
ISO 7176-24:2004 Wheelchairs - Part 24: Requirements and test methods for user-operated stair-climbing devices
ISO 2197:1972 Sodium hydrogen carbonate for industrial use; List of methods of test and preparation of the test sample
ISO 4612:2018 Plastics — Preparation of PVC pastes for test purposes — Planetary-mixer method

International Electrotechnical Commission (IEC), How to use semi-prepared

IEC 60749-37:2022 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer
IEC TR 62240:2005 Process management for avionics - Use of semiconductor devices outside manufacturers' specified temperature range
IEC 60749-40:2011 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge
IEC 60749-37:2022 RLV Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer
IEC 60749-39:2006 Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
IEC 60191-6-20:2010 Mechanical standardization of semiconductor devices - Part 6-20: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline J-lead packages (SOJ)
IEC 62047-12:2011 Semiconductor devices - Microelectromechanical devices - Part 12: Bending fatigue testing method of thin film materials using resonant vibration of MEMS structures
IEC 61189-6:2006 Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in electronic assemblies

Danish Standards Foundation, How to use semi-prepared

DS/EN 60749-37:2008 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer
DS/EN 60749-40:2011 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge
DS/EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration
DS/EN ISO 11348-1:2009 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria
DS/ISO 25337:2010 Plastics - Production quality control - Statistical method for using single measurements
DS/EN 15964:2011 Breath alcohol test devices other than single use devices - Requirements and test methods
DS/EN ISO 3745:2012 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms
DS/EN 958+A1:2011 Mountaineering equipment – Energy absorbing systems for use in klettersteig (via ferrata) climbing – Safety requirements and test methods
DS/ISO 17493:2002 Clothing and equipment for protection against heat - Test method for convective heat resistance using a hot air circulating oven

European Committee for Electrotechnical Standardization（CENELEC）, How to use semi-prepared

EN IEC 60749-37:2022 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer
EN 60749-37:2008 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer
EN 60749-40:2011 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge
EN IEC 62969-2:2018 Semiconductor devices - Semiconductor interface for automotive vehicles - Part 2: Efficiency evaluation methods of wireless power transmission using resonance for automotive vehicles sensors
EN 50281-2-1:1998 Electrical Apparatus for Use in the Presence of Combustible Dust - Part 2-1: Test Methods - Methods of Determining Minimum Ignition Temperatures

Korean Agency for Technology and Standards (KATS), How to use semi-prepared

KS M ISO 8504-1:2012 Preparation of steel substrates before application of paints and related products－Surface preparation methods－Part 1：General principles
KS M 1953-2016 Methanol for industrial use－Methods of te
KS M ISO 8504-2:2012 Preparation of steel substrates before application of paints and related products-Surface preparation methods-Part 2:Abrasive blast-cleaning
KS M ISO 8504-1:2021 Preparation of steel substrates before application of paints and related products — Surface preparation methods —Part 1: General principles
KS M ISO 2267:2007 Surface active agents - Evaluation of certain effects of laundering - Methods of preparation and use of unsoiled cotton control cloth
KS M ISO 2267-2007(2017) Surface active agents - Evaluation of certain effects of laundering - Methods of preparation and use of unsoiled cotton control cloth
KS B ISO 15998-2:2014 Earth-moving machinery — Machine control systems(MCS) using electronic components — Part 2: Use and application of ISO 15998
KS M ISO 2267-2007(2022) Surface active agents - Evaluation of certain effects of laundering - Methods of preparation and use of unsoiled cotton control cloth
KS M ISO 8504-3:2021 Preparation of steel substrates before application of paints and related products — Surface preparation methods —Part 3: Hand- and power-tool cleaning
KS R 1073-2004(2009) Methods of inspection for serviceability of automotive wheel bearings
KS M ISO 8504-3:2002 Preparation of steel substrates before application of paints and related products－Surface preparation methods－Part 3：Hand- and power-tool cleaning
KS X 1025-2009 Information technology-Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
KS M ISO 8504-1-2012(2017) Preparation of steel substrates before application of paints and related products－Surface preparation methods－Part 1：General principles
KS R 1169-2009(2019) Test method for automotive electric parking brake control equipments
KS B 0508-1994 Method of preparing deposited metal sample for chemical analysis
KS B 0508-2003 METHOD OF PREPARING DEPOSITED METAL SAMPLE FOR CHEMICAL ANALYSIS
KS C IEC 60749-39:2006 Semiconductor devices－Mechanical and climatic test methods－Part 39：Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
KS D ISO 14284:2003 Steel and iron-Sampling and preparation of samples for the dedermination of chemical composition
KS M ISO 11125-1:2002 Preparation of steel substrates before application of paints and related products－Test methods for metallic blast-cleaning abrasives－Part 1：Sampling
KS M ISO 11125-1-2002(2017) Preparation of steel substrates before application of paints and related products－Test methods for metallic blast-cleaning abrasives－Part 1：Sampling
KS M ISO 11125-1:2021 Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 1: Sampling
KS M ISO 11127-1:2012 Preparation of steel substrates before application of paints and related products-Test methods for non-metallic blast-cleaning abrasives-Part 1:Sampling
KS M ISO 11127-1-2012(2017) Preparation of steel substrates before application of paints and related products－Test methods for non-metallic blast-cleaning abrasives－Part 1：Sampling
KS M ISO 11127-1:2021 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 1: Sampling
KS B ISO 15998:2012 Earth-moving machinery-Machine-control systems(MCS) using electronic components-Performance criteria and tests for functional safety
KS B ISO 15998:2014 Earth-moving machinery — Machine control systems(MCS) using electronic components — Performance criteria and tests for functional safety
KS M ISO 2197:2002 Sodium hydrogen carbonate for industrial use－List of methods of test and preparation of the test sample
KS M ISO 2197:2017 Sodium hydrogen carbonate for industrial use — List of methods of test and preparation of the test sample
KS M ISO 11125-6:2002 Preparation of steel substrates before application of paints and related products－Test methods for metallic blast-cleaning abrasives－Part 6：Determination of foreign matter
KS M ISO 11125-7:2002 Preparation of steel substrates before application of paints and related products－Test methods for metallic blast - cleaning abrasives－Part 7：Determination of moisture
KS M ISO 11125-6-2002(2017) Preparation of steel substrates before application of paints and related products－Test methods for metallic blast-cleaning abrasives－Part 6：Determination of foreign matter
KS M ISO 11125-7-2002(2017) Preparation of steel substrates before application of paints and related products－Test methods for metallic blast - cleaning abrasives－Part 7：Determination of moisture
KS M ISO 11125-7:2021 Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 7: Determination of moisture
KS M ISO 11125-3:2021 Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 3: Determination of hardness
KS M ISO 11125-6-2002(2021) Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 6: Determination of foreign matter
KS M ISO 11125-3:2002 Preparation of steel substrates before application of paints and related products－Test methods for metallic blast - cleaning abrasives－Part 3：Determination of hardness
KS X ISO 14648-2-2007(2022) Micrographics－Quality control of COM recorders that generate images using a single internal display system－Part 2：Method of use
KS M ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 2：Method for the grading of surface profile of abrasive blast-cleaned steel－Comparator procedure
KS C IEC 61189-6:2009 Test methods for electrical materials, interconnection structures and assemblies-Part 6:Test methods for materials used in manufacturing electronic assemblies
KS M ISO 11127-5:2021 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 5: Determination of moisture
KS K ISO 17493:2021 Clothing and equipment for protection against heat — Test method for convective heat resistance using a hot air circulating oven
KS C IEC 62629-12-1:2022 3D Display Devices — Part 12-1: Measuring methods for stereoscopic displays using glasses — Optical
KS M ISO 11127-5:2013 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives-Part 5: Determination of moisture
KS M ISO 11127-5:2003 Preparation of steel substrates before application of paints and related products-Test methods for non-metallic blast-cleaning abrasives-Part 5:Determination of moisture

Japanese Industrial Standards Committee (JISC), How to use semi-prepared

JIS C 6521:1996 Test methods of prepreg for multilayer printed wiring boards
JIS K 6250:2006 Rubber -- General procedures for preparing and conditioning test pieces for physical test methods
JIS K 6250:2019 Rubber -- General procedures for preparing and conditioning test pieces for physical test methods
JIS A 1201:1990 Practice for preparing disturbed soil samples for soil testing
JIS A 1132:1993 Method of making and curing concrete specimens
JIS M 0301:1975 Methods of sampling of rock and preparation of test piece for strength test
JIS R 2207-2:2007 Test methods for thermal expansion rate of refractory products -- Part 2: Contact method using cylinder test piece
JIS R 2207-3:2007 Test methods for thermal expansion of refractory products -- Part 3: Contact method using rod test piece
JIS Z 3184:2003 Method of preparing deposited metal pad and samples for chemical analysis
JIS C 5630-12:2014 Semiconductor devices.Micro-electromechanical devices.Part 12: Bending fatigue testing method of thin film materials using resonant vibration of MEMS structures
JIS K 6949:2015 Plastics -- Methods for the preparation of samples for biodegradation testing of plastic materials
JIS Z 3129:2005 Test method and preparation of test specimens for single-run and two-run welding technique in steel

KR-KS, How to use semi-prepared

KS M ISO 8504-1-2021 Preparation of steel substrates before application of paints and related products — Surface preparation methods —Part 1: General principles
KS M ISO 8504-3-2021 Preparation of steel substrates before application of paints and related products — Surface preparation methods —Part 3: Hand- and power-tool cleaning
KS R 1190-2023 Test method for automotive brake wear particle measurement using brake dynamometer
KS M ISO 11125-1-2021 Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 1: Sampling
KS M ISO 2197-2017 Sodium hydrogen carbonate for industrial use — List of methods of test and preparation of the test sample
KS M ISO 11127-1-2021 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 1: Sampling
KS M ISO 11125-7-2021 Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 7: Determination of moisture
KS M ISO 11125-3-2021 Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 3: Determination of hardness
KS M ISO 11127-5-2021 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 5: Determination of moisture
KS K ISO 17493-2021 Clothing and equipment for protection against heat — Test method for convective heat resistance using a hot air circulating oven
KS C IEC 62629-12-1-2022 3D Display Devices — Part 12-1: Measuring methods for stereoscopic displays using glasses — Optical

BELST, How to use semi-prepared

STB 2132-2010 Manufacture from skins. Method of definition used materials

Lithuanian Standards Office , How to use semi-prepared

LST EN 60749-37-2008 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer (IEC 60749-37:2008)
LST ISO 2267:2003 Surface active agents. Evaluation of certain effects of laundering. Methods of preparation and use of unsoiled cotton control cloth (idt ISO 2267:1986)
LST EN 60749-40-2011 Semiconductor devices - Mechanical and climatic test methods -- Part 40: Board level drop test method using a strain gauge (IEC 60749-40:2011)
LST EN 15964-2011 Breath alcohol test devices other than single use devices - Requirements and test methods
LST EN ISO 11348-1:2009 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria (ISO 11348-1:2007)
LST EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
LST EN ISO 3745:2012 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012)

German Institute for Standardization, How to use semi-prepared

DIN EN IEC 60749-37:2023 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer (IEC 47/2651/CDV:2020); German and English version prEN IEC 60749-37:2020
DIN CEN/TR 16816:2018-06*DIN SPEC 68116:2018-06 End use performance of wood products - Utilisation and improvement of existing methods to estimate service life; German version CEN/TR 16816:2015
DIN EN 17352:2022 Power operated pedestrian entrance control equipment - Safety in use - Requirements and test methods
DIN 18873-10:2012-12 Methods for measuring of the energy use from equipment for commercial kitchens - Part 10: Ice machines
DIN EN 17352:2022-08 Power operated pedestrian entrance control equipment - Safety in use - Requirements and test methods; German version EN 17352:2022
DIN EN 17352:2019 Power operated pedestrian entrance control equipment - Safety in use - Requirements and test methods; German and English version prEN 17352:2019
DIN EN 60749-40:2012-02 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge (IEC 60749-40:2011); German version EN 60749-40:2011
DIN EN ISO 6145-1:2020-02 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019); German version EN ISO 6145-1:2019
DIN EN IEC 60749-37:2023-02 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer (IEC 47/2651/CDV:2020); German and English version prEN IEC 60749-37:2020 / Note: Date of issue 2023-01-20*Intended as replaceme...
DIN ISO 2267:2016 Surface active agents - Evaluation of certain effects of laundering - Methods of preparation and use of unsoiled cotton control cloth (ISO 2267:1986)
DIN EN 15312:2007 Free access multi-sports equipment - Requirements, including safety, and test methods; German version EN 15312:2007
DIN EN 60749-37:2008-08 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer (IEC 60749-37:2008); German version EN 60749-37:2008 / Note: To be replaced by DIN EN IEC 60749-37 (2023-02).
DIN EN ISO 6145-1:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
DIN 10113-3:1997 Determination of surface colony count on fitment and utensils in foodareas - Part 3: Semiquantitative method with culture media laminated taking up equipment (squeeze method)
DIN EN ISO 11468:1999-09 Plastics - Preparation of PVC pastes for test purposes - Dissolver method (ISO 11468:1997); German version EN ISO 11468:1999
DIN EN ISO 3745:2017-10 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012 + Amd 1:2017); German version EN ISO 3745:2012 + A1:2017
DIN EN 13880-6:2004 Hot applied joint sealants - Part 6: Test method for the preparation of samples for testing; German version EN 13880-6:2003
DIN EN 13146-8:2012 Railway applications - Track - Test methods for fastening systems - Part 8: In service testing; German version EN 13146-8:2012
DIN EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres; English version of DIN EN 15198:2007-11
DIN EN ISO 6145-7:2019 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
DIN CEN ISO/TS 21805:2019-07*DIN SPEC 14039:2019-07 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018); German version EN ISO 6145-7:2018
DIN EN ISO 6145-7:2019-07 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018); German version EN ISO 6145-7:2018
DIN EN 61189-3:2008 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) (IEC 61189-3:2007); German version EN 61189-3:2008
DIN 18873-14:2014-09 Methods for measuring of the energy use from equipment for commercial kitchens - Part 14: Point of use water dispenser for cooling and carbon dioxide enrichment
DIN 18873-10:2012 Methods for measuring of the energy use from equipment for commercial kitchens - Part 10: Ice machines
DIN EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device; German version EN 14278-1:2004

未注明发布机构, How to use semi-prepared

DIN EN ISO 11393-6:2020 Protective clothing for users of hand-held chainsaws – Part 6: Test methods and performance requirements for upper body protective equipment

CZ-CSN, How to use semi-prepared

CSN 56 0246 Cast.2-1985 Methods of testing for canned semi-finished products and products of fruit and vegetable. Desulphitation of pulp for preparation for sensory evaluation
CSN 91 0271-1987 Furniture. Method of sampling and preparing the samples for determining the properties of the surface
CSN 44 1304-1989 Solid fuels. Methods of sampling and preparation of samples for laboratory testing

ZA-SANS, How to use semi-prepared

SANS 8833:1989 Magnetite for use in coal preparation - Test methods

European Committee for Standardization (CEN), How to use semi-prepared

FprEN 17352-2021 Power operated pedestrian entrance control equipment - Safety in use - Requirements and test methods
EN 17352:2022 Power operated pedestrian entrance control equipment - Safety in use - Requirements and test methods
CEN/TR 16816:2015 End use performance of wood products - Utilisation and improvement of existing methods to estimate service life
EN 15964:2011 Breath alcohol test devices other than single use devices - Requirements and test methods
EN ISO 16852:2016 Flame arresters - Performance requirements@ test methods and limits for use
CENELEC EN 60749-37-2008 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer (IEC 60749-37:2008)
PD CEN/TR 16663:2014 Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground) - Semi-field method
EN 15312:2007 Free access multi-sports equipment - Requirements, including safety and test methods (Incorporates Amendment A1: 2010)
CEN/TS 16663:2016 Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground) - Semi-field method
EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
HD 477.2.2 S1-1987 Methods of measurement for equipment used in terrestrial radio-relay systems; part 2: measurements for sub-systems; section 2: stand-by channel switching equipment
HD 477.2.4 S1-1987 Methods of measurement for equipment used in terrestrial radio-relay systems; part 2: measurements for sub-systems; section 4: frequency modulators
EN ISO 11125-7:1997 Preparation of Steel Substrates before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 7: Determination of Moisture
EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device

AENOR, How to use semi-prepared

UNE 55826:1985 SURFACE ACTIVE AGENTS. EVALUATION OF CERTAIN EFFECTS OF LAUNDERING. METHODS OF PREPARATION AND USE OF UNSOILED COTTON CONTROL CLOTH
UNE-EN 15964:2012 Breath alcohol test devices other than single use devices - Requirements and test methods
UNE-EN ISO 11348-1:2009 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria (ISO 11348-1:2007)
UNE 54114:1999 INFORMATION AND DOCUMENTATION. REQUIREMENTS FOR BINDING MATERIALS AND METHODS USED IN THE MANUFACTURE OF BOOKS.
UNE-EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
UNE 20711-2-4:1996 METHODS OF MEASUREMENT OF EQUIPMENT USED IN TERRESTRIAL RADIO-RELAY SYSTEMS. PART 2: MEASUREMENTS FOR SUB-SYSTEMS. SECTION FOUR: FREQUENCY MODULATORS.
UNE-EN ISO 3745:2012 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012)
UNE 20711-2-2:1996 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN TERRESTRIAL RADIO-RELAY SYSTEMS. PART 2: MEASUREMENTS FOR SUB-SYSTEMS. SECTION TWO: STAND-BY CHANNEL SWITCHING EQUIPMENT.

CENELEC - European Committee for Electrotechnical Standardization, How to use semi-prepared

PREN 50561-2-2015 Powerline communication apparatus used in low voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 2: Apparatus for access-network use
EN 50561-3:2016 Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 3: Apparatus operating above 30 MHz

VN-TCVN, How to use semi-prepared

TCVN 5364-1991 Textiles.Method for determination of unevenness by the USTER equipment

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to use semi-prepared

GB/T 21548-2008 Methods of measurement of the high speed semiconductor lasers directly modulated for optical fiber communication systems
GB/T 603-2002 Chemical reagent--Preparations of reagent solutions for use in test methods
GB/T 3315-2006 Test methods for diesel locomotives on completion of construction and before entry into service
GB/T 3318-2006 Test methods for electric locomotives on completion of construction and before entry into service
GB/T 27800-2011 Determination of the life for static sealing rubber products
GB/T 28876.2-2014 Flammability of materials in space experimental facilities.Part 2:Test methods
GB/T 6730.1-1986 Methods for chemical analysis of iron ores--Preparation of predried test samples for chemical analysis
GB 6730.1-1986 Preparation of predried samples for analysis by chemical analysis methods of iron ore

国家市场监督管理总局、中国国家标准化管理委员会, How to use semi-prepared

GB/T 21548-2021 Methods of measurement of the high speed semiconductor lasers directly modulated for optical fiber communication systems
GB/T 27800-2021 Determination of the life for static sealing rubber products

IN-BIS, How to use semi-prepared

Professional Standard - Agriculture, How to use semi-prepared

GB 603-1988 Preparation of preparations and products used in chemical reagent test methods
GB/T 603-2023 Preparation of preparations and products used in chemical reagent test methods

Standard Association of Australia （SAA）, How to use semi-prepared

AS 1627.9:1989 Metal finishing - Preparation and pretreatment of surfaces - Pictorial surface preparation standards for painting steel surfaces
AS 1289.1.1:2001/Amdt 2:2008
AS 1289.1.1:2001/Amdt 1:2002
AS 3940:1990/Amdt 2:1993
AS 3940:1990/Amdt 1:1992
AS ISO 128.20:2005 Technical drawings - General principles of presentation - Basic conventions for lines
AS/NZS 2891.2.2:2014
AS 1289.1.2.1:1998(R2013)
AS/NZS 61241.2.2:2000 Electrical apparatus for use in the presence of combustible dust - Test methods - Method for determining the electrical resistivity of dust in layers
AS 5336:2019 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi — anechoic rooms
AS/NZS 61241.2.1:2000 Electrical apparatus for use in the presence of combustible dust - Test methods - Methods for determining the minimum ignition temperature of dust
AS 1289.1.2.1:1998 Methods of testing soils for engineering purposes - Sampling and preparation of soils - Disturbed samples - Standard method
AS/NZS 1301.002s:2004 Methods of test for pulp and paper - Preparation of wood samples for chemical analysis
AS 1141.30.2:2022 Methods for sampling and testing aggregates, Method 30.2: Preparation of aggregate reference specimens for visual comparison
AS/NZS 4347.8:1995 Damp-proof courses and flashings - Methods of test - Preparation of coating bitumen for testing

ES-UNE, How to use semi-prepared

UNE-EN 60749-40:2011 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge (Endorsed by AENOR in November of 2011.)
UNE-EN ISO 6145-1:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
UNE-EN IEC 60749-37:2022 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer (Endorsed by Asociación Española de Normalización in January of 2023.)
UNE-EN 60749-37:2008 Semiconductor devices - Mechanical and climatic test methods -- Part 37: Board level drop test method using an accelerometer (Endorsed by AENOR in July of 2008.)
UNE-EN IEC 62969-2:2018 Semiconductor devices - Semiconductor interface for automotive vehicles - Part 2: Efficiency evaluation methods of wireless power transmission using resonance for automotive vehicles sensors (Endorsed by Asociación Española de Normalización in June ...
UNE-EN ISO 6145-7:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
UNE-EN ISO 11393-6:2019 Protective clothing for users of hand-held chainsaws - Part 6: Performance requirements and test methods for upper body protectors (ISO 11393-6:2018, Corrected version 2019-11)
UNE-EN 60510-2-5:1994 METHODS OF MEASUREMENT FOR RADIO EQUIPMENT USED IN SATELLITE EARTH STATIONS. PART 2: MEASUREMENTS FOR SUB-SYSTEMS. SECTION 5: FREQUENCY MODULATIONS. (Endorsed by AENOR in May of 1995.)
UNE-EN ISO 11348-1:2009/A1:2019 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria - Amendment 1 (ISO 11348-1:2007/Amd 1:2018)
UNE-EN ISO 6145-6:2018 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017)
UNE-EN ISO 4612:2019 Plastics - Preparation of PVC pastes for test purposes - Planetary-mixer method (ISO 4612:2018)
UNE-EN 50561-3:2016 Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 3: Apparatus operating above 30 MHz

Underwriters Laboratories (UL), How to use semi-prepared

UL 2360-2000 Test Methods for Determining the Combustibility Characteristics of Plastics Used in Semi-Conductor Tool Construction
UL 61010-2-081-2015 UL Standard for Safety Requirements for Electrical Equipment for Measurement@ Control and Laboratory Use – Part 2-081: Particular Requirements for Automatic and Semi-Automatic Laboratory Equipment for Analysis and Other Purposes (Second Edition)

International Telecommunication Union (ITU), How to use semi-prepared

ITU-T O.42 SPANISH-1988 EQUIPMENT TO MEASURE NONLINEAR DISTORTION USING THE 4-TONE INTERMODULATION METHOD

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., How to use semi-prepared

ASHRAE 203-2014 Method of Test for Determining Heat Gain of Office Equipment Used in Buildings
ASHRAE 203-2018 Method of Test for Determining Heat Gain of Office Equipment Used in Buildings
ASHRAE 41.9-2018 Standard Methods for Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE NY-08-055-2008 Supply Fan Control Methods for VAV Systems Using a Fan Airflow Station
ASHRAE 41.10-2013 Standard Methods for Refrigerant Mass Flow Measurement Using Flowmeters
ASHRAE BN-97-16-1997 Symposium on Field Methods for Analyzing Equipment@ Building@ and Facility Energy Use
ASHRAE 3657-1993 New Refrigerant Drying Method in an Automotive Air-Conditioning System Using R-134a
ASHRAE 4241-1999 Control of Household Refrigerators Part II: Alternate Control Approaches for Improving Temperature Performance and Reducing Energy Use
ASHRAE 41.9-2011 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE 41.9 ERTA-2017 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE 4054-1997 Deferred Heat Supply for Space Heating Using a Capacity-Limiting Device - A Beneficial Approach for District Heating

American National Standards Institute （ANSI), How to use semi-prepared

ANSI S2.21-1998 Method for Preparation of a Standard Material for Dynamic Mechanical Measurements
ANSI/ASHRAE 171-2008 Method of Test of Seismic Restraint Devices for HVAC&R Equipment
ANSI/ASHRAE 41.10 ERTA-2021 Standard Method for Refrigerant Mass Flow Measurement Using Flowmeters
ANSI/ASHRAE 41.9-2011 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
ANSI/ASA S2.21-1998 Standard Method for Preparation of a Standard Material for Dynamic Mechanical Measurements
ANSI/ASHRAE 18-2008 Methods of Testing for Rating Drinking-Water Coolers with Self-Contained Mechanical Refrigeration
ANSI/ASTM D5934:1997 Test Method for Determination of the Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three Point Bending

Professional Standard - Machinery, How to use semi-prepared

JB/T 9355-1999 Preparation method of calibration solution for the measurement of atomic absorption

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), How to use semi-prepared

ASHRAE 41.10 ERTA-2021 Standard Method for Refrigerant Mass Flow Measurement Using Flowmeters
ASHRAE 41.10-2008 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Flowmeters

RO-ASRO, How to use semi-prepared

STAS 10226-1975 Radio interference DEVICES FOR RADIO INTERFERENCE SUPPRESSION General technical requirements for use and safety and methods of test
STAS 9804/2-1989 Refrigerating equipment OPEN TYPE PISTON REFRIGERATING COMPRESSORS AND SEMI-HERMETICAL PISTON MOTOR-COMPRESSORS Rules and methods for quality checking up

HU-MSZT, How to use semi-prepared

MSZ 3224/5-1981

AASHTO - American Association of State Highway and Transportation Officials, How to use semi-prepared

TP4-2000 Standard Method for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor (2000 Edition)
TP4-1993 Standard Method for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the SHRP Gyratory Compactor (Edition 1C)
TP 105-2013 Standard Method of Test for Determining the Fracture Energy of Asphalt Mixtures Using the Semicircular Bend Geometry (SCB)
T 146-1996 Standard Method of Test for Wet Preparation of Disturbed Soil Samples for Test

AT-ON, How to use semi-prepared

ONORM L 5233-1998 Agricultural vehicles and seif propelled machines used in mountainous regions - Parking brake - Test methods

The American Road & Transportation Builders Association, How to use semi-prepared

AASHTO TP 105-2013 Standard Method of Test for Determining the Fracture Energy of Asphalt Mixtures Using the Semicircular Bend Geometry (SCB)

PL-PKN, How to use semi-prepared

PN C89009-1973 Plajtics Preparation o? specimenj for optical tesfs Moulding method
PN Z55202-1991 Medical equipment. Transfusion sets for single use. Requirements and test methods
PN Z02010-01-1985 Individual respiratory protective equipment use in air environment Methods of testingIntroduction genera?
PN T05000-1991 Telecommunication network in mines. Cable lines. Measuring methods using direct current and intrinsically safe devices

European Telecommunications Standards Institute (ETSI), How to use semi-prepared

ETSI TR 102 780-2009 Methods for Testing and Specification (MTS); Security; Guide to the use of methods in development of ETSI security standards (V1.1.1)
ETSI EG 201 872-2001 Methods for Testing and Specification (MTS); Methodological Approach to the Use of Object-Orientation in the Standards Making Process (V1.2.1)

ETSI - European Telecommunications Standards Institute, How to use semi-prepared

EG 201 872-2001 Methods for Testing and Specification (MTS); Methodological Approach to the Use of Object-Orientation in the Standards Making Process (V1.2.1)
ETR 259-1996 Methods for Testing and Specification (MTS); Bibliography of Techniques@ Methodologies and Practices Used in Standards Making
TR 102 105-1999 Methods for Testing and Specification (MTS); Methodological Approach to the Use of Object-Orientation within the Standards Making Process; Initial Study (V1.1.1)

Society of Automotive Engineers (SAE), How to use semi-prepared

SAE J1610-1992 TEST METHOD FOR EVALUATING THE SEALING CAPABILITY OF HOSE CONNECTIONS WITH A PVT TEST FACILITY

GOSTR, How to use semi-prepared

GOST R 58401.13-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Method for preparation of specimens using gyratory compactor
GOST ISO 23529-2020 Rubber. General methods for preparing and conditioning test pieces for determination of physical properties

Indonesia Standards, How to use semi-prepared

SNI 7184.4-2010

TH-TISI, How to use semi-prepared

TIS 1294-1995 Standard test method for flash point of cutback asphalt with tag open-cup

AT-OVE/ON, How to use semi-prepared

OVE EN IEC 60749-37:2020 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer (IEC 47/2651/CDV) (english version)

Professional Standard - Post and Telecommunication, How to use semi-prepared

YD/T 922-1997 Performance and test methods of the integrated multiplex equipment using in the digital channel

API - American Petroleum Institute, How to use semi-prepared

API PUBL 348 V2-1997 Air Toxics Emission Factors for Combustion Sources Using Petroleum-Based Fuels - Volume 2 Development of Emission Factors Using API/WSPA Approach

SE-SIS, How to use semi-prepared

SIS SS-ETS 300 118-1991 Attachments to the Public Switched Tele- phone Network (PSTN) — Category II attachment requirements for 1200 bits per second half duplex and 1200/75 bits per second asymmetrical duplex modems standardized for use on the PSTN

BE-NBN, How to use semi-prepared

NBN EN ISO 9887:1995 Water quality - Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium - Semi-continuous activated sludge method (SCAS) (ISO 9887:1992)
NBN T 63-301-1987 Surface active agents - Evaluation of certain effects of laundering - Methods of preparation and use of unsoiled cotton control cloth

(U.S.) Ford Automotive Standards, How to use semi-prepared

FORD FLTM BU 154-03-2007 PRODUCTION FACILITY PAINTED TEST PANEL PREPARATION METHOD FOR QUICK KNIFE ADHESION TEST (FLTM BU 154-01)

Canadian General Standards Board （CGSB), How to use semi-prepared

CGSB 1-GP-71 METH 97.1-1974 Methodes D'Essai Des Peintures Et Pigments Preparation Des Plaques En Bois Conditions Generales

CEN - European Committee for Standardization, How to use semi-prepared

EN ISO 11125-7:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture

YU-JUS, How to use semi-prepared

JUS N.N6.221-1985 Radiocommunications. Equipment used in the mobile services. Transmitters employing A3E, F3E or G3E. Methods of measurement. Characteristics of the measuring eguipment
JUS N.N6.223-1985 Radiocommunications. Equipment used in the mobile services. Transmitters employing A3E, F3E or G3E emissions. Methods of measurement. Characteristics of the measuring equipment

TR-TSE, How to use semi-prepared

TS 2597-1977 METHODS OF MEASUREMENT FOR RADIO EQUIPMENT USED ?N THE MOB?LE SERVICES PART ? 1 GENERAL DEFINITIONS AND STANDARD CONDITIONS 01 MEASUREMENT

Institute of Electrical and Electronics Engineers (IEEE), How to use semi-prepared

IEEE P2621.3/D3.0, February 2022 IEEE Draft Recommended Practice for Wireless Diabetes Device Security - Use of Mobile Devices in Diabetes Control Contexts

National Aeronautics and Space Administration (NASA), How to use semi-prepared

NASA NACA-TN-3996-1957 Investigation of a short-annular-diffuser configuration utilizing suction as a means of boundary-layer control