ZH
RU
ES
basic principles and methods
basic principles and methods, Total:122 items.
In the international standard classification, basic principles and methods involves: Measurement of volume, mass, density, viscosity, Paint ingredients, Air quality, Petroleum, petroleum products and natural gas handling equipment, Vocabularies, Safety of machinery, Ergonomics, Wastes, Integrated circuits. Microelectronics, Explosion protection, Standardization. General rules, Electrical engineering in general, Agricultural machines, implements and equipment, Bearings, Services, Leisure. Tourism, Products of the textile industry, Microbiology, Structures of buildings, Information sciences. Publishing, Road vehicle systems, Paints and varnishes, Ceramics, Colour coding, Radiation measurements, Nuclear energy engineering, Products of the chemical industry, Protection of and in buildings, Protection against fire, Welding, brazing and soldering, Transport, Technical drawings, Occupational safety. Industrial hygiene, Quality.
German Institute for Standardization, basic principles and methods
- DIN-Fachbericht 143:2005 Modern rheological test methods - Part 1: Determination of the yield point - Fundamentals and comparative testing methods
- DIN EN ISO 27500:2017-07 The human-centred organization - Rationale and general principles (ISO 27500:2016); German version EN ISO 27500:2017
- DIN 19655:1996 Irrigation - Problems, fundamental principles, planning and methods
- DIN 19655:2008 Irrigation - Tasks, fundamental principles, planning and methods
- DIN 19655:2008-11 Irrigation - Tasks, fundamental principles, planning and methods
- DIN 10115:2020 Fundamentals for detection and determination of microorganisms in foodstuffs with impedance-method
- DIN 25457-1:2012 Activity measurement methods for the clearance of radioactive substances and nuclear facility components - Part 1: Fundamentals
- DIN EN ISO 27500:2017 The human-centred organization - Rationale and general principles (ISO 27500:2016); German version EN ISO 27500:2017
Association of German Mechanical Engineers, basic principles and methods
- VDI 4205 Blatt 1-2003 Measurement and test methods for the assessment of vapour recovery systems on filling stations - Fundamentals
- VDI 3476 Blatt 1-2015 Waste gas cleaning - Methods of catalytic waste gas cleaning - Fundamentals
- VDI 3476 Blatt 1-2005 Waste gas cleaning - Methods of catalytic waste gas cleaning - Fundamentals
- DVS 2950-2010 Resistance welding in electronics and fine mechanics - Overview and fundamentals
Aeronautical Radio Inc., basic principles and methods
British Standards Institution (BSI), basic principles and methods
- BS EN ISO 12100-1+A1:2003 Safety of machinery - Basic concepts, general principles for design - Basic terminology, methodology
- BS EN ISO 12100-1:2003 Safety of machinery - Basic concepts, general principles for design - Basic terminology, methodology
- BS ISO 24620-4:2023 Language resource management. Controlled human communication (CHC) - Basic principles and methodology for stylistic guidelines (BSG)
- BS EN ISO 14720-1:2013 Testing of ceramic raw and basic materials. Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials. Infrared measurement methods
- BS ISO 24620-3:2021 Language resource management. Controlled human communication (CHC). Basic principles and methodology for controlled oral communication (COralCom)
Japanese Industrial Standards Committee (JISC), basic principles and methods
- JIS Z 8541:2022 The human-centred organization -- Rationale and general principles
- JIS B 9700-1:2004 Safety of machinery -- Basic concepts, general principles for design -- Part 1: Basic terminology, methodology
- JIS Q 17067:2014 Conformity assessment -- Fundamentals of product certification and guidelines for product certification schemes
Association Francaise de Normalisation, basic principles and methods
- NF X35-127*NF EN ISO 27500:2017 The human-centred organization - Rationale and general principles
- NF EN ISO 27500:2017 Organisme centré sur l'humain - Justification et principes généraux
- NF E09-090-1:1997 Explosive atmospheres. Explosion prevention and protection. Part 1 : basic concepts and methodology.
- NF E09-001-1:1991 SAFETY OF MACHINERY. BASIC CONCEPTS,GENERAL PRINCIPLES FOR DESIGN. PART 1 : BASIC TERMINOLOGY,METHODOLOGY. (EUROPEAN STANDARD EN 292-1).
- NF E09-001-2:1991 Safety of machinery. Basic concepts, general principles for design. Part 2 : technical principles and specifications.
- FD S99-513*FD ISO/TR 21582:2021 Pyrogenicity - Principles and methods for pyrogen testing of medical devices
- NF B40-675-1*NF EN ISO 14720-1:2013 Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 1 : infrared measurement methods
ES-UNE, basic principles and methods
- UNE-EN ISO 27500:2017 The human-centred organization - Rationale and general principles (ISO 27500:2016) (Endorsed by Asociación Española de Normalización in July of 2017.)
- UNE-EN 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles (Endorsed by AENOR in July of 2004.)
International Organization for Standardization (ISO), basic principles and methods
- ISO/TR 9122-2:1990 Toxicity testing of fire effluents; part 2: guidelines for biological assays to determine the acute inhalation toxicity of fire effluents (basic principles, criteria and methodology)
- ISO 19624:2018 Bamboo structures - Grading of bamboo culms - Basic principles and procedures
- ISO 27500:2016 The human-centred organization - Rationale and general principles
- ISO/CD TR 20659-1:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point
- ISO/DTR 20659-1:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point
- ISO/TR 10158:1991 Principles and rationale underlying calculation methods in relation to fire resistance of structural elements
- ISO 12100-1:2003/Amd 1:2009 Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology — Amendment 1
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, basic principles and methods
- GB/T 14030-1992 General principles of measuring methods of timer circuits for semiconductor integrated circuits
- GB 14030-1992 Basic principles of semiconductor integrated circuit time-based circuit testing methods
- GB/T 7027-2002 Basic principles and methods for information classifying and coding
- GB/T 14029-1992 General principles of measuring methods of analogue multiplier for semiconductor integrated circuits
- GB 14029-1992 Basic principles of semiconductor integrated circuit analog multiplier testing methods
- GB/T 14028-1992 General principles of measuring methods of analogue switches for semiconductor integrated circuits
- GB 14028-2018 Basic principles of semiconductor integrated circuit analog switch test methods
- GB/T 6798-1996 Semiconductor integrated circuits. General principles of measuring methods of voltage comparators
- GB/T 4377-1996 Semiconductor integrated circuits. General principles of measuring methods of voltage regulator
- GB/T 14031-1992 General principles of measuring methods of analogue phase-loop for semiconductor integrated circuits
- GB/T 14032-1992 General principles of measuring methods of digital phase-locked loop for semiconductor integrated circuits
- GB 14031-1992 Basic principles of semiconductor integrated circuit analog phase-locked loop testing methods
- GB 14032-1992 Basic principles of digital phase-locked loop testing methods for semiconductor integrated circuits
- GB/T 15136-1994 General principles of measuring methods for quartz clock and watch circuits of semiconductor integrated circuits
- GB/T 14115-1993 General principles of measuring methods of Sample/Hold amplifiers for semiconductor integrated circuits
- GB 3442-1986 Basic principles of semiconductor integrated circuit operational (voltage) amplifier testing methods
- GB/T 14114-1993 General principles of measuring methods of V/F and F/V converters for semiconductor integrated circuits
- GB/T 6800-1986 General principles of measuring methods of audio power amplifiers for semiconductor audio integrated circuits
European Committee for Standardization (CEN), basic principles and methods
- EN 292-1:1991 Safety of machinery; basic concepts, general principles for design; part 1: basic terminology, methodology
- EN ISO 14720-1:2013 Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 1: Infrared measurement methods
Professional Standard - Electron, basic principles and methods
- SJ 20961-2006 General principles of measuring methods of A/D and D/A converters for integrated circuits
- SJ/T 10735-1996 Semiconductor integrated circuits General principles of measuring methods for TTL circuits
- SJ/T 10736-1996 Semiconductor integrated circuits - General principles of measuring methods for HTL circuits
- SJ/T 10737-1996 Semiconductor integrated circuits - General principles of measuring methods for ECL circuits
- SJ/T 10741-2000 Semiconductor integrated circuits General principles of measuring methods for CMOS circuits
- SJ/T 10741-1996 Semiconductor integrated circuits--General principles of measuring methods for CMOS circuits
- SJ/T 10804-2000 Semiconductor integrated circuits.General principles of measuring methods for level translator
- SJ/T 10805-2000 Semiconductor integrated circuits.General principles of measuring methods for voltage comparators
- SJ/T 10882-1996 Semiconductor integrated circuits - General principles of measuring methods for linear amplifiers
- SJ/T 10803-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for line circuits
- SJ/T 10739-1996 Semiconductor integrated circuits - General principles of measuring methods for MOS random access memories
- SJ/T 11007-1996 Semiconductor TV integrated circuits - General principles of measuring methods for video signal and chrominance signal processing circuits
- SJ/T 10738-1996 Semiconductor integrated circuits - General principles of measuring methods for operational (voltage) amplifiers
- SJ/T 10800-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for sense amplifiers
- SJ/T 10802-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for peripheral drivers
- SJ/T 10805-1996 Semiconductor integrated circuits used as interface circuits--General principles of measuring methods of voltage comparators
- SJ/T 10804-1996 Semiconductor integrated circuits used as interface circuits--General principles of measuring methods for level translator
- SJ/T 10806-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for display drivers
- SJ/T 11005-1996 Semiconductor TV integrated circuits - General principles of measuring methods for audio channel circuits
- SJ/T 11006-1996 Semiconductor TV integrated circuits - General principles of measuring methods for horizontal and vertical sweep circuits
- SJ/T 10401-1993 General principles of measuring methods for motor speed stablizers of semiconductor audio integrated circuits
- SJ/T 10740-1996 Semiconductor integrated circuits - General principles of measuring methods for bipolar random access memories
- SJ 2480-1984 General principles of static measurement for D/A converters for hybrid integrated circuits
- SJ/T 10402-1993 General principles of measuring methods for automatic music selectors of semiconductor audio integrated circuits
- SJ/T 10400-1993 General principles of measuring methods for graphic equalizers of semiconductor audio integrated circuits
- SJ/T 11004-1996 Semiconductor TV integrated circuits - General principles of measuring methods for picture channel circuits
- SJ/T 10880-1996 Semiconductor integrated audio circuits - General principles of measuring methods for stereo decoders
- SJ 2481-1984 General principles of static measurement for A/D converters for hybrid integrated circuits
- SJ/T 10879-1996 Semiconductor integrated audio circuits - General principles of measuring methods for audio preamplifiers
- SJ/T 10427.1-1993 Grneral Principles of measuring methods of FM converter for semiconductor audio integrated circuits
- SJ/T 10427.2-1993 General principles of measuring methods of intermediate-frequency amplifier for semiconductor audio integrated circuits
- SJ/T 10881-1996 Semiconductor integrated audio circuits - General principles of measuring methods for stereo decoders
Korean Agency for Technology and Standards (KATS), basic principles and methods
- KS C IEC 60447:2016 Basic and safety principles for man-machine interface, marking and identification ― Actuating principles
- KS C IEC 60073:2009 Basic and safety principles for man-machine interface, marking and identification－Coding principles for indicators and actuators
NL-NEN, basic principles and methods
- NEN-EN 292-1-1994 Safety of machinery. Basic concepts, general principles for design. Part 1: Basic terminology, methodology
Society of Automotive Engineers (SAE), basic principles and methods
- SAE AIR5315-2011 Overview and Rationale for GOA Framework Standard
- SAE AIRTST5315-1998 Overview and Rationale for Goa Framework Standard
- SAE J1574-2-2005 Measurement of Vehicle and Suspension Parameters for Directional Control Studies--Rationale
- SAE J1574-2-2012 Measurement of Vehicle and Suspension Parameters for Directional Control Studies--Rationale
- SAE J1574/2-2000 Measurement of Vehicle and Suspension Parameters for Directional Control Studies--Rationale
- SAE J1574/2-2012 Measurement of Vehicle and Suspension Parameters for Directional Control Studies - Rationale
- SAE J1574/2-2018 Measurement of Vehicle and Suspension Parameters for Directional Control Studies - Rationale
- SAE J1574/2-2005 Measurement of Vehicle and Suspension Parameters for Directional Control Studies--Rationale
SAE - SAE International, basic principles and methods
- SAE AIR5315A-2018 Overview and Rationale for GOA Framework Standard
- SAE AIR5712-2008 Common Launch Acceptability Region Approach (CLARA) Rationale Document
- SAE J1574-2-2018 Steel@ Corrosion-Resistant@ Bars@ Wire@ Forgings@ Mechanical Tubing@ and Rings 16Cr - 4.0Ni - 0.30Cb (Nb) - 4.0Cu Solution Heat Treated@ Precipitation Hardenable
- SAE J1574-2-2000 Measurement of Vehicle and Suspension Parameters for Directional Control Studies - Rationale
American National Standards Institute （ANSI), basic principles and methods
RU-GOST R, basic principles and methods
- GOST R 52105-2003 Resources saving. Waste treatment. Classification and treatment methods of the mercury containing waste. Basic principles
- GOST R 51333-1999 Safety of machinery. Basic concepts, general principles for design. Basic terminology, technical principles and specifications
- GOST 28681.0-1990 Standardization in the field of tourist-excursion service. Basis provisions
- GOST 30157.0-1995 Textile fabrics. Methods of measures changes determination after wet treatments and chemical cleaning. General
- GOST R 55860-2013 Air transport aviation safety management system. Conception of safety management system. Basic provisions and main principals
Danish Standards Foundation, basic principles and methods
- DS/EN 292-1:1993 Safety of machinery. Basic concepts, general principles for design. Part 1: Basic terminology, methodology
- DS/ISO/TR 21582:2021 Pyrogenicity – Principles and methods for pyrogen testing of medical devices
International Electrotechnical Commission (IEC), basic principles and methods
- IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
AT-ON, basic principles and methods
- ONORM B 3801-1995 Wood protection in building and construction - Fundamentals and definitions
RO-ASRO, basic principles and methods
- STAS SR EN 292-1-1996 Safety of machinery. Basic concepts, general principles for design Part 1 : Basic terminology, methodology
Lithuanian Standards Office , basic principles and methods
- LST EN 60447-2004 Basic and safety principles for man-machine interface, marking and identification. Actuating principles (IEC 60447:2004)
Standard Association of Australia （SAA）, basic principles and methods
- AS ISO 128.22:2005 Technical drawings - General principles of presentation - Basic conventions and applications for leader lines and reference lines
- AS 4024.1201:2006 Safety of machinery - General principles - Basic terminology and methodology
VN-TCVN, basic principles and methods
- TCVN 7383-1-2004 Safety of machinery.Basic concepts, general principles for design.Part 1: Basic terminology,methodology
- TCVN 5637-1991 Quality management in building and installation building works.Basic principles
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., basic principles and methods