ZH

RU

ES

How to use solid phase extractor

How to use solid phase extractor, Total:269 items.

In the international standard classification, How to use solid phase extractor involves: Water quality, Animal feeding stuffs, Wastes, Fuels, Cereals, pulses and derived products, Air quality, Analytical chemistry, General methods of tests and analysis for food products, Coals, Nuclear energy engineering, Paint ingredients, Farming and forestry, Surface treatment and coating, Soil quality. Pedology, Organic chemicals, Edible oils and fats. Oilseeds, Products of the chemical industry, Fruits. Vegetables, Products of the textile industry, Tobacco, tobacco products and related equipment, Plastics, Textile fibres, Rubber, Burners. Boilers, Thermodynamics and temperature measurements, Floor treatment appliances, Lubricants, industrial oils and related products, Materials and articles in contact with foodstuffs, Beverages, Prepackaged and prepared foods, Test conditions and procedures in general, Environmental testing, Paints and varnishes, Paint coating processes, Protection against fire.


American Society for Testing and Materials (ASTM), How to use solid phase extractor

  • ASTM D7168-05 Standard Test Method for99Tc in Water by Solid Phase Extraction Disk
  • ASTM D7168-11e1 Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk
  • ASTM D7168-05e1 Standard Test Method for99Tc in Water by Solid Phase Extraction Disk
  • ASTM D7168-16 Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk
  • ASTM D7168-21 Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk
  • ASTM D5369-93(1998) Standard Practice for Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction
  • ASTM D7168-11 Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk
  • ASTM D7621-15a Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM D3987-06 Standard Test Method for Shake Extraction of Solid Waste with Water
  • ASTM D5263-21 Standard Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction
  • ASTM D6889-03(2017) Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)
  • ASTM C1771-19 Standard Test Method for Determination of Boron, Silicon, and Technetium in Hydrolyzed Uranium Hexafluoride by Inductively Coupled Plasma—Mass Spectrometer After Removal of Uranium by Solid Pha
  • ASTM D6438-99 Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
  • ASTM D6438-05(2015) Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
  • ASTM D5263-15 Standard Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction
  • ASTM D8144-22 Standard Test Method for Separation and Determination of Aromatics, Nonaromatics, and FAME Fractions in Middle Distillates by Solid-Phase Extraction and Gas Chromatography
  • ASTM D7621-16(2021) Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM D7621-15 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM D7363-07 Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monito
  • ASTM D7621-13 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM D7621-14 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM D7621-16 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM D6438-05(2022) Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
  • ASTM D7202-15 Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
  • ASTM D6889-03 Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)
  • ASTM D6889-03(2011) Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)
  • ASTM D8144-18e1 Standard Test Method for Separation and Determination of Aromatics, Nonaromatics, and FAME Fractions in Middle Distillates by Solid-Phase Extraction and Gas Chromatography
  • ASTM D8144-18 Standard Test Method for Separation and Determination of Aromatics, Nonaromatics, and FAME Fractions in Middle Distillates by Solid-Phase Extraction and Gas Chromatography
  • ASTM E2838-11 Standard Test Method for Determination of Thiodiglycol on Wipes by Solvent Extraction Followed by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
  • ASTM C1771-13 Standard Test Method for Determination of Boron, Silicon, and Technetium in Hydrolyzed Uranium Hexafluoride by Inductively Coupled Plasmamdash;Mass Spectrometer After Removal of Uranium by Solid Phase Extraction
  • ASTM D5175-91(2003) Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography
  • ASTM D7858-13 Standard Test Method for Determination of Bisphenol A in Soil, Sludge and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry
  • ASTM E2787-21 Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
  • ASTM D7363-13A(2021)e1 Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monito
  • ASTM D7363-13 Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monitoring Mode
  • ASTM D7363-13a Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monitoring Mode
  • ASTM D6060-17 Standard Test Method for Sampling of Process Vents with a Portable Gas Chromatograph
  • ASTM D4542-15 Standard Test Methods for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer
  • ASTM D7363-11 Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monitoring Mode
  • ASTM D5316-98 Standard Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography
  • ASTM D5316-98(2004) Standard Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography
  • ASTM D5175-91(2011) Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography
  • ASTM D5316-98(2011) Standard Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography
  • ASTM D6073-96 Standard Test Method for Relative Setting of Heatset Printing Inks by the Sinvatrol Tester
  • ASTM D8133-23 Standard Test Method for Determination of Low Level Phthalates in Poly(Vinyl Chloride) Plastics by Solvent Extraction—Gas Chromatography/Mass Spectrometry
  • ASTM D7858-13(2018) Standard Test Method for Determination of Bisphenol A in Soil, Sludge, and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry
  • ASTM D5987-96(2015) Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
  • ASTM D6601-12 Standard Test Method for Rubber Propertiesmdash;Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
  • ASTM D8133-17 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly(Vinyl Chloride) Plastics by Solvent Extraction—Gas Chromatography/Mass Spectrometry
  • ASTM D8535-23 Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances (PFAS) in Soil/Biosolid Matrices by Solvent Extraction, Filtering, and Followed by Liquid Chromatography Tandem Mass Spect
  • ASTM E2154-15a Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Solid Phase Microextraction (SPME)
  • ASTM D6601-02 Standard Test Method for Rubber Properties-Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
  • ASTM C1784-20 Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products
  • ASTM F2828-12 Standard Test Method for Assessing Carpet Cleaning Effectiveness in Terms of Visual Appearance Change When Cleaned with a Wet Extraction Cleaning System
  • ASTM E2787-11 Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
  • ASTM E2154-01 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Solid Phase Microextraction (SPME)
  • ASTM E2154-01(2008) Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Solid Phase Microextraction (SPME)
  • ASTM D7686-11 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
  • ASTM D6601-19 Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
  • ASTM D7686-23 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
  • ASTM D7235-10 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
  • ASTM D7750-12 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
  • ASTM D6836-02 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge
  • ASTM D6660-01(2014)e1 Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
  • ASTM E28-14 Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus
  • ASTM D7235-21 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
  • ASTM D7235-21a Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
  • ASTM D6438-05 Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
  • ASTM E2154-15 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Solid Phase Microextraction (SPME)
  • ASTM E1618-10 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry

Danish Standards Foundation, How to use solid phase extractor

  • DS/ISO 24293:2009 Water quality - Determination of individual isomers of nonylphenol - Method using solid phase extraction (SPE) and gas chromatography/mass spectrometry (GC/MS)
  • DS/ISO 20179:2007 Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection
  • DS/EN ISO 27108:2013 Water quality - Determination of selected plant treatment agents and biocide products - Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS)
  • DS/ISO 25101:2009 Water quality - Determination of perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA) - Method for unfiltered samples using solid phase extraction and liquid chromatography/mass spectrometry
  • DS/EN ISO 11369:1998 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction
  • DS/EN ISO 18857-1:2006 Water quality - Determination of selected alkylphenols - Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection
  • DS/EN ISO 23631/AC:2007 Water quality - Determination of dalapon, trichloroacetic acid and selected haloacetic acids - Method using gas chromatography (GC-ECD and/or GC-MS detection) after liquid-liquid extraction and derivatization
  • DS/EN ISO 23631:2006 Water quality - Determination of dalapon, trichloroacetic acid and selected haloacetic acids - Method using gas chromatography (GC-ECD and/or GC-MS detection) after liquid-liquid extraction and derivatization
  • DS/EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography

Association Francaise de Normalisation, How to use solid phase extractor

  • NF V18-806*NF EN 17547:2021 Animal feeding stuffs - Methods of sampling and analysis - Determination of vitamin A, E and D content - Method using solid phase extraction (SPE) clean-up and high-performance liquid chromatography (HPLC)
  • NF EN ISO 17495:2003 Qualité de l'eau - Dosage des nitrophénols sélectionnés - Méthode par extraction en phase solide avec détection par chromatographie en phase gazeuse et spectrométrie de masse
  • NF V18-251*NF EN 16278:2012 Animal feeding stuffs - Determination of inorganic arsenic by hydride generation atomic absorption spectrometry (HG-AAS) after microwave extraction and separation by solid phase extraction (SPE)
  • NF T90-205*NF EN ISO 27108:2013 Water quality - Determination of selected plant treatment agents and biocide products - Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS)
  • NF T90-693*NF EN 16693:2015 Water quality - Determination of organochlorine pesticides (OCP) in whole water samples - mETHOD using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
  • NF T90-943*NF EN ISO 17943:2016 Water quality - Determination of volatile organic compounds in water - Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS)
  • NF EN 16694:2015 Qualité de l'eau - Dosage du pentabromodiphényléther (PBDE) dans des échantillons d'eau totale - Méthode par extraction en phase solide (SPE) avec disques SPE, avec couplage chromatographie en phase gazeuse-spectrométrie de masse (CG-SM)
  • NF T90-691*NF EN 16691:2015 Water quality - Determination of selected polycyclic aromatic hydrocarbons (PAH) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
  • NF T90-694*NF EN 16694:2015 Water quality - Determination of selected polybrominated diphenly ether (PBDE) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography - mass spectrometry (GC-MS)
  • FD T90-423*FD CEN/TS 16692:2015 Water quality - Determination of tributyltin (TBT) in whole water samples - Method using solid phase extraction (SPE) with SPE disks and gas chromatography with triple quadrupole mass spectrometry
  • NF EN 17547:2021 Aliments des animaux - Méthodes d'échantillonnage et d'analyse - Détermination de la teneur en vitamines A, E et D - Méthode utilisant la purification par extraction en phase solide (SPE) et la chromatographie liquide à haute performance (CLHP)
  • NF EN ISO 27108:2013 Qualité de l'eau - Détermination d'agents de traitement et de produits d'usine sélectionnés - Méthode utilisant une micro-extraction en phase solide (MEPS) suivie d'une chromatographie en phase gazeuse-spectrométrie de masse (CG-SM)
  • NF EN ISO 11369:1997 Qualité de l'eau - Dosage de certains agents de traitement des plantes - Méthode par chromatographie en phase liquide haute performance (CLHP) avec détection UV après extraction solide-liquide
  • FD CEN/TS 16692:2015 Qualité de l'eau - Dosage du tributylétain (TBT) dans la totalité des échantillons d'eau - Méthode par extraction sur phase solide (SPE) avec disques SPE et chromatographie en phase gazeuse avec spectrométrie de masse triple quadrupôle
  • NF EN ISO 17943:2016 Qualité de l'eau - Détermination de composés organiques volatils dans l'eau - Méthode utilisant une micro-extraction sur phase solide (MEPS) de l'espace de tête suivie d'une chromatographie en phase gazeuse-spectrométrie de masse (CG-SM)
  • XP T90-223:2013 Water quality - Determination of some drug residues in the water-dissolved fraction - Method using solid phase extraction (SPE) and liquid chromatographic analysis with tandem mass spectrometric investigation (LC-MS/MS)
  • NF EN 16693:2015 Qualité de l'eau - Dosage des pesticides organochlorés (POC) dans la totalité de l'échantillon d'eau - Méthode par extraction en phase solide (EPS) avec disques SPE, avec couplage chromatographie en phase gazeuse-spectrométrie de masse (CG-SM)
  • NF EN ISO 14362-1:2017 Textiles - Méthodes de détermination de certaines amines aromatiques dérivées de colorants azoïques - Partie 1 : détection de l'utilisation de certains colorants azoïques accessibles avec ou sans extraction
  • NF T90-123*NF EN ISO 11369:1997 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction.
  • NF ISO 22634-2:2020 Cigarettes - Dosage du benzo[a]pyrène dans le courant principal de la fumée de cigarette par CG/SM - Partie 2 : méthode utilisant du cyclohexane comme solvant d'extraction
  • NF V37-050-1*NF ISO 22634-1:2020 Cigarettes - Determination of benzo[a]pyrene in cigarette mainstream smoke using GC/MS - Part 1 : method using methanol as extraction solvent
  • NF V37-050-2*NF ISO 22634-2:2020 Cigarettes - Determination of benzo[a]pyrene in cigarette mainstream smoke using GC/MS - Part 2 : method using cyclohexane as extraction solvent
  • NF EN ISO 16373-2:2014 Textiles - Colorants - Partie 2 : méthode générale pour la détermination des colorants extractibles, notamment les colorants allergènes et carcinogènes (méthode utilisant un mélange pyridine/eau)
  • NF ISO 22634-1:2020 Cigarettes - Dosage du benzo[a]pyrène dans le courant principal de la fumée de cigarette par CG/SM - Partie 1 : méthode utilisant du méthanol comme solvant d'extraction
  • NF T90-180*NF EN ISO 15913:2003 Water quality - Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization
  • NF T90-182*NF EN ISO 23631:2006 Water quality - Determination of dalapon, trichloroacetic acid and selected haloacetic acids - Method using gas chromatography (GCD-ECD and/or GC-MS detection) after liquid-liquid extraction and derivatization
  • NF T90-184-2*NF EN ISO 18857-2:2012 Water quality - Determination of selected alkylphenols - Part 2 : gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples following solid-phase extraction and derivatisation.
  • NF V03-061:2009 Foods of plant origin - Determination of pesticide residues using GC-MS and/or LC-MS/MS) following acetonitrile extraction/partitioning and clean-up by dispersive SPE - QuEChERS-method.
  • NF X43-052*NF ISO 25597:2014 Stationary source emissions - Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution

German Institute for Standardization, How to use solid phase extractor

  • DIN EN 17547:2022 Animal feeding stuffs: Methods of sampling and analysis - Determination of vitamin A, E and D content - Method using solid phase extraction (SPE) clean-up and high-performance liquid chromatography (HPLC)
  • DIN EN 17547:2022-01 Animal feeding stuffs: Methods of sampling and analysis - Determination of vitamin A, E and D content - Method using solid phase extraction (SPE) clean-up and high-performance liquid chromatography (HPLC); German version EN 17547:2021
  • DIN EN 17547:2020 Animal feeding stuffs: Methods of sampling and analysis - Determination of vitamin A, E and D content - Method using solid phase extraction clean-up and High Performance Liquid Chromatography; German and English version prEN 17547:2020
  • DIN EN 16693:2015 Water quality - Determination of organochlorine pesticides (OCP) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography-mass spectrometry (GC-MS)
  • DIN CEN/TS 16692:2015-08*DIN SPEC 38407-49:2015-08 Water quality - Determination of tributyltin (TBT) in whole water samples - Method using solid phase extraction (SPE) with SPE disks and gas chromatography with triple quadrupole mass spectrometry; German version CEN/TS 16692:2015
  • DIN EN 16693:2015-12 Water quality - Determination of organochlorine pesticides (OCP) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography-mass spectrometry (GC-MS); German version EN 16693:2015
  • DIN EN 16691:2015 Water quality - Determination of selected polycyclic aromatic hydrocarbons (PAH) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography-mass spectrometry (GC-MS)
  • DIN EN 16691:2015-12 Water quality - Determination of selected polycyclic aromatic hydrocarbons (PAH) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography-mass spectrometry (GC-MS); German version EN 16691:2015
  • DIN EN ISO 17943:2016-10 Water quality - Determination of volatile organic compounds in water - Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS) (ISO 17943:2016); German version EN ISO 17943:2016
  • DIN EN ISO 27108:2013-12 Water quality - Determination of selected plant treatment agents and biocide products - Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS) (ISO 27108:2010); German version EN ISO 27108:2013
  • DIN EN 16694:2015 Water quality - Determination of selected polybrominated diphenly ether (PBDE) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography-mass spectrometry (GC-MS)
  • DIN EN 16278:2012 Animal feeding stuffs - Determination of inorganic arsenic by hydride generation atomic absorption spectrometry (HG-AAS) after microwave extraction and separation by solid phase extraction (SPE); German version EN 16278:2012
  • DIN EN 16694:2015-12 Water quality - Determination of selected polybrominated diphenly ether (PBDE) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography-mass spectrometry (GC-MS); German version EN 16694:2015
  • DIN EN ISO 11369:1997-11 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction (ISO 11369:1997); German version EN ISO 11369:1997
  • DIN ISO 20179:2007 Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection (ISO 20179:2005) English version of DIN ISO 20179:2007-10
  • DIN EN ISO 18609:2002-03 Animal and vegetable fats and oils - Determination of unsaponifiable matter - Method using hexane extraction (ISO 18609:2000); German version EN ISO 18609:2001
  • DIN EN ISO 3596:2002-03 Animal and vegetable fats and oils - Determination of unsaponifiable matter - Method using diethyl ether extraction (ISO 3596:2000); German version EN ISO 3596:2001
  • DIN ISO 20179:2007-10 Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection (ISO 20179:2005)
  • DIN SPEC 1038:2010 Determination of extractable perfluorooctanesulfonate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams - Method for sampling, extraction and analysis by LC-qMS or LC-tandem/MS; German version CEN/TS 15968:2010
  • DIN EN ISO 22032:2009-07 Water quality - Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge - Method using extraction and gas chromatography/mass spectrometry (ISO 22032:2006); German version EN ISO 22032:2009
  • DIN EN ISO 27108:2013 Water quality - Determination of selected plant treatment agents and biocide products - Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS) (ISO 27108:2010); German version EN ISO 27108:2013
  • DIN EN ISO 16373-2:2014-10 Textiles - Dyestuffs - Part 2: General method for the determination of extractable dyestuffs including allergenic and carcinogenic dyestuffs (method using pyridine-water) (ISO 16373-2:2014); German version EN ISO 16373-2:2014
  • DIN EN ISO 18857-1:2007-02 Water quality - Determination of selected alkylphenols - Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection (ISO 18857-1:2005); German version EN ISO 18857-1:2006
  • DIN ISO 22634-2:2021-02 Cigarettes - Determination of benzo[a]pyrene in cigarette mainstream smoke using GC/MS - Part 2: Method using cyclohexane as extraction solvent (ISO 22634-2:2019)
  • DIN EN 12393-2:2009 Foods of plant origin - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 2: Methods for extraction and cleanup; English version of DIN EN 12393-2:2009-01
  • DIN EN ISO 15913:2003 Water quality - Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization (ISO 15913:2000); German version EN ISO 15913:2
  • DIN 38407-34:2006 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 34: Determination of selected plant treatment agents, biocides and break-down products; Method using gas chromatography (GC-MS)
  • DIN EN 14362-2:2003 Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 2: Detection of the use of certain azo colorants accessible by extracting the fibres; German version EN 14362-2:2003
  • DIN 38407-14:1994 German standard methods for the examination of water, waste water, and sludge - Jointly determinable substances (group F) - Part 14: Determination of phenoxyalkyl carbonic acids by gas chromatography and mass-spectrometric detection after solid-liquid-ext
  • DIN EN 14362-1:2003 Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible without extraction; German version EN 14362-1:2003
  • DIN EN ISO 25139:2011-08 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011); German version EN ISO 25139:2011
  • DIN EN 12393-2:2014 Foods of plant origin - Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS - Part 2: Methods for extraction and cleanup; German version EN 12393-2:2013
  • DIN EN ISO 17059:2009 Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method) (ISO 17059:2007); English version of DIN EN ISO 17059:2009-11
  • DIN CEN/TS 17847:2023-09 Characterization of waste - Determination of selected low boiling point alcohols using gas chromatography with flame ionization detection after static head-space extraction (HS-GC-FID); German version CEN/TS 17847:2022
  • DIN EN 15890:2010 Foodstuffs - Determination of patulin in fruit juice and fruit based purée for infants and young children - HPLC method with liquid/liquid partition cleanup and solid phase extraction and UV detection; German version EN 15890:2010
  • DIN EN 14362-1:2012 Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres; German version EN 14362-1:2012
  • DIN EN ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method (ISO 8502-6:2006); English version of DIN EN

British Standards Institution (BSI), How to use solid phase extractor

  • BS EN 17547:2021 Animal feeding stuffs: Methods of sampling and analysis. Determination of vitamin A, E and D content. Method using solid phase extraction (SPE) clean-up and highperformance liquid chromatography (HPLC)
  • 20/30396933 DC BS EN 17547. Animal feeding stuffs: Methods of sampling and analysis. Determination of vitamin A, E and D content. Method using solid phase extraction clean-up and High Performance Liquid Chromatography
  • BS EN 16278:2012 Animal feeding stuffs. Determination of inorganic arsenic by hydride generation atomic absorption spectrometry (HG-AAS) after microwave extraction and separation by solid phase extraction (SPE)
  • BS ISO 25101:2009 Water quality - Determination of perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA) - Method for unfiltered samples using solid phase extraction and liquid chromatography/mass spectrometry
  • BS ISO 21675:2019 Water quality. Determination of perfluoroalkyl and polyfluoroalkyl substances (PFAS) in water. Method using solid phase extraction and liquid chromatography-tandem mass spectrometry (LC-MS/MS)
  • BS EN ISO 9377-2:2000 Water quality. Determination of hydrocarbon oil index. Method using solvent extraction and gas chromatography
  • BS PD CEN/TR 17063:2017 Foods of plant origin. Multimethod for the determination of pesticide residues using GC- or LC-based analysis following acetonitrile extraction/partitioning and cleanup by dispersive SPE. Validation data of the modular QuEChERS-method
  • BS PD CEN/TS 16692:2015 Water quality. Determination of tributyltin (TBT) in whole water samples. Method using solid phase extraction (SPE) with SPE disks and gas chromatography with triple quadrupole mass spectrometry
  • BS EN ISO 27108:2013 Water quality. Determination of selected plant treatment agents and biocide products. Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS)
  • BS EN ISO 11369:1997 Water quality. Determination of selected plant treatment agents. Method using high performance liquid chromatography with UV detection after solid-liquid extraction
  • BS ISO 24293:2009 Water quality - Determination of individual isomers of nonylphenol - Method using solid phase extraction (SPE) and gas chromatography/mass spectrometry (GC/MS)
  • BS PD CEN/TS 15968:2010 Determination of extractable perfluorooctanesulphonate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams. Method for sampling, extraction and analysis by LCqMS or LC-tandem/MS
  • BS EN ISO 22032:2009 Water quality. Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge. Method using extraction and gas chromatography/mass spectrometry
  • BS ISO 21863:2020 Water quality. Determination of alkylmercury compounds in water. Method using gas chromatography-mass spectrometry (GC-MS) after phenylation and solvent extraction
  • BS EN ISO 18609:2001 Animal and vegetable fats and oils. Determination of unsaponifiable matter. Method using hexane extraction
  • BS EN ISO 17993:2002 Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction
  • BS 6043-2.8:1987 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of oil content by solvent extraction of calcined coke
  • 20/30361179 DC BS ISO 21863. Water quality. Determination of alkylmercury compounds in water. Method using gas chromatography-mass spectrometry (GC-MS) after phenylation and solvent extraction
  • BS EN 12393-2:2008 Foods of plant origin - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 2: Methods for extraction and cleanup
  • BS EN ISO 17059:2007 Oilseeds. Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method)
  • BS EN ISO 17059:2009 Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method)
  • 19/30356328 DC BS ISO 20596-2. Water quality. Determination of cyclic volatile methylsiloxanes in water. Part 2. Method using liquid-liquid extraction with gas chromatography-mass spectrometry (GC-MS)
  • BS EN ISO 13437:1998 Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory
  • BS ISO 23906-1:2020 Cigarettes. Determination of benzo[a]pyrene in cigarette mainstream smoke with an intense smoking regime using GC/MS - Method using methanol as extraction solvent
  • BS ISO 23906-2:2023 Cigarettes. Determination of benzo[a]pyrene in cigarette mainstream smoke with an intense smoking regime using GC/MS - Method using cyclohexane as extraction solvent
  • BS EN ISO 15913:2000 Water quality. Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization
  • BS ISO 20596-2:2021 Water quality. Determination of cyclic volatile methylsiloxanes in water. Method using liquid-liquid extraction with gas chromatography-mass spectrometry (GC-MS)
  • BS EN ISO 18857-1:2006 Water quality - Determination of selected alkylphenols - Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection
  • BS ISO 11023:1999 Liquorice extracts (Glycyrrhiza glabra L.). Determination of glycyrrhizic acid content. Methods using high-performance liquid chromatography
  • BS EN 14362-1:2003 Textiles - Methods for the determination of certain aromatic amines derived from azo colorants - Detection of the use of certain azo colorants accessible without extraction
  • BS EN 12393-2:2013 Foods of plant origin. Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS. Methods for extraction and clean-up
  • BS EN ISO 15913:2003 Water quality. Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization
  • BS EN 14362-1:2012 Textiles. Methods for determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants accessible with and without extracting the fibres
  • BS EN ISO 14362-1:2017 Textiles. Methods for determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants accessible with and without extracting the fibres
  • BS PD CEN/TS 13649:2014 Stationary source emissions. Determination of the mass concentration of individual gaseous organic compounds. Sorptive sampling method followed by solvent extraction or thermal desorption
  • 19/30387762 DC BS ISO 22634-1. Cigarettes. Determination of benzo[a]pyrene in cigarette mainstream smoke using GC/MS. Part 1. Method using methanol as extraction solvent
  • 22/30393114 DC BS ISO 23906-2. Cigarettes. Determination of benzo[a]pyrene in cigarette mainstream smoke with an intense smoking regime using GC/MS - Part 2. Method using cyclohexane as extraction solvent
  • 19/30387765 DC BS ISO 22634-2. Cigarettes. Determination of benzo[a]pyrene in cigarette mainstream smoke using GC/MS. Part 2. Method using cyclohexane as extraction solvent
  • BS EN 14362-2:2003 Textiles - Methods for the determination of certain aromatic amines deriv ed from azo colorants - Detection of the use of certain azo colorants accessible by extracting t he fibres
  • BS EN 14362-2:2003(2006) Textiles - Methods for the determination of certain aromatic amines deriv ed from azo colorants - Detection of the use of certain azo colorants accessible by extracting t he fibres
  • BS ISO 24362-1:2014 Textiles. Methods for determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants accessible with and without extracting the fibres
  • BS EN 15662:2018 Tracked Changes. Foods of plant origin. Multimethod for the determination of pesticide residues using GC- and LC-based analysis following acetonitrile extraction/partitioning and clean-up by dispersive SPE. Modular QuEChERS-method

ES-UNE, How to use solid phase extractor

  • UNE-EN 17547:2022 Animal feeding stuffs: Methods of sampling and analysis - Determination of vitamin A, E and D content - Method using solid phase extraction (SPE) clean-up and high-performance liquid chromatography (HPLC)
  • UNE-EN 16693:2016 Water quality - Determination of organochlorine pesticides (OCP) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
  • UNE-EN 16691:2016 Water quality - Determination of selected polycyclic aromatic hydrocarbons (PAH) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
  • UNE-EN ISO 17943:2016 Water quality - Determination of volatile organic compounds in water - Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS) (ISO 17943:2016)
  • UNE-EN 16694:2016 Water quality - Determination of selected polybrominated diphenly ether (PBDE) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography - mass spectrometry (GC-MS)
  • UNE-EN ISO 23631:2007/AC:2008 Water quality - Determination of dalapon, trichloroacetic acid and selected haloacetic acids - Method using gas chromatography (GC-ECD and/or GC-MS detection) after liquid-liquid extraction and derivatization (ISO 23631:2006)
  • UNE-EN 15662:2019 Foods of plant origin - Multimethod for the determination of pesticide residues using GC- and LC-based analysis following acetonitrile extraction/partitioning and clean-up by dispersive SPE - Modular QuEChERS-method
  • UNE-EN 14662-3:2016 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography

European Committee for Standardization (CEN), How to use solid phase extractor

  • FprEN 17547-2021 Animal feeding stuffs: Methods of sampling and analysis - Determination of vitamin A, E and D content - Method using solid phase extraction clean-up and High Performance Liquid Chromatography
  • EN 16278:2012 Animal feeding stuffs - Determination of inorganic arsenic by hydride generation atomic absorption spectrometry (HG-AAS) after microwave extraction and separation by solid phase extraction (SPE)
  • EN 16693:2015 Water quality - Determination of organochlorine pesticides (OCP) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
  • EN 16691:2015 Water quality - Determination of selected polycyclic aromatic hydrocarbons (PAH) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
  • EN 16694:2015 Water quality - Determination of selected polybrominated diphenly ether (PBDE) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography - mass spectrometry (GC-MS)
  • EN 13585:2001 Foodstuffs - Determination of Fumonisins B1 and B2 in Maize - HPLC Method with Solid Phase Extraction Clean-Up
  • EN ISO 27108:2013 Water quality - Determination of selected plant treatment agents and biocide products - Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS) (ISO 27108:2010)
  • CEN/TS 16692:2015 Water quality - Determination of tributyltin (TBT) in whole water samples - Method using solid phase extraction (SPE) with SPE disks and gas chromatography with triple quadrupole mass spectrometry
  • EN ISO 17943:2016 Water quality - Determination of volatile organic compounds in water - Method using headspace solidphase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS)
  • EN ISO 17059:2019 Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method) (ISO 17059:2019)
  • EN ISO 17059:2009 Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method) (ISO 17059:2007)
  • EN 12393-2:2008 Foods of plant origin - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 2: Methods for extraction and cleanup
  • EN 12393-2:1998 Non-Fatty Foods - Multiresidue Methods for the Gas Chromatographic Determination of Pesticide Residues - Part 2: Methods for Extraction and Clean-Up Ratified European Text
  • EN ISO 15913:2003 Water quality - Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization
  • EN 12393-2:2013 Foods of plant origin - Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS - Part 2: Methods for extraction and clean-up
  • EN ISO 18857-1:2006 Water quality - Determination of selected alkylphenols - Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection (ISO 18857-1:2005)
  • EN 1186-10:2002 Materials and articles in contact with foodstuffs - Plastics - Part 10: Test methods for overall migration into olive oil (modified method for use in case where incomplete extraction of olive oil occurs)

ZA-SANS, How to use solid phase extractor

  • SANS 17495:2002 Water quality - Determination of selected nitrophenols - Method by solid-phase extraction and gas chromatography with mass spectrometric detection

Japanese Industrial Standards Committee (JISC), How to use solid phase extractor

  • JIS B 7993:2008 Automated measuring systems for flue gas using non-exractive methods
  • JIS A 1232:2023 Method for obtaining soil samples using the fixed piston sampler

International Organization for Standardization (ISO), How to use solid phase extractor

  • ISO 24293:2009 Water quality - Determination of individual isomers of nonylphenol - Method using solid phase extraction (SPE) and gas chromatography/mass spectrometry (GC/MS)
  • ISO 27108:2010 Water quality - Determination of selected plant treatment agents and biocide products - Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS)
  • ISO 25101:2009 Water quality - Determination of perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA) - Method for unfiltered samples using solid phase extraction and liquid chromatography/mass spectrometry
  • ISO 20179:2005 Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection
  • ISO 8502-15:2020 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 15: Extraction of soluble contaminants for analysis by acid e
  • ISO 21863:2020 Water quality - Determination of alkylmercury compounds in water - Method using gas chromatography-mass spectrometry (GC-MS) after phenylation and solvent extraction
  • ISO 17059:2007 Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method)
  • ISO 22634-1:2019 Cigarettes — Determination of benzo[a]pyrene in cigarette mainstream smoke using GC/MS — Part 1: Method using methanol as extraction solvent
  • ISO 22634-2:2019 Cigarettes — Determination of benzo[a]pyrene in cigarette mainstream smoke using GC/MS — Part 2: Method using cyclohexane as extraction solvent
  • ISO 15913:2000 Water quality - Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization

AENOR, How to use solid phase extractor

  • UNE-EN ISO 11369:1998 WATER QUALITY. DETERMINATION OF SELECTED PLANT TREATMENT AGENTS. METHOD USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY WITH UV DETECTION AFTER SOLID-LIQUID EXTRACTION. (ISO 11369:1997).
  • UNE-EN ISO 27108:2014 Water quality - Determination of selected plant treatment agents and biocide products - Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS) (ISO 27108:2010)
  • UNE-EN ISO 9377-2:2001 Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography. (ISO 9377-2:2000)
  • UNE-EN ISO 22032:2009 Water quality - Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge - Method using extraction and gas chromatography/mass spectrometry (ISO 22032:2006)
  • UNE-EN ISO 18857-1:2007 Water quality - Determination of selected alkylphenols - Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection (ISO 18857-1:2005)
  • UNE-EN ISO 23631:2007 Water quality - Determination of dalapon, trichloroacetic acid and selected haloacetic acids - Method using gas chromatography (GC-ECD and/or GC-MS detection) after liquid-liquid extraction and derivatization (ISO 23631:2006)
  • UNE-EN ISO 16373-2:2015 Textiles - Dyestuffs - Part 2: General method for the determination of extractable dyestuffs including allergenic and carcinogenic dyestuffs (method using pyridine-water) (ISO 16373-2:2014)
  • UNE-EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011)

Professional Standard - Commodity Inspection, How to use solid phase extractor

  • SN/T 3626-2013 Determination of hexanal in edible oil for export.Headspace-SPME-GC method

Group Standards of the People's Republic of China, How to use solid phase extractor

  • T/JPMA 002-2019 Determination of 9 organophosphorus flame retardants in drinking water by solid phase extraction-gas chromatography method

RU-GOST R, How to use solid phase extractor

  • GOST EN 13585-2013 Foodstuffs. Determination of fumonisins B1 and B2 in maize. HPLC method with solid phase extraction clean-up
  • GOST 32689.2-2014 Foods of plant origin. Multiresidue methods for the gas chromatographic determination of pesticide residues. Part 2. Methods for extraction and cleanup
  • GOST 32015-2012 Food products, feeds, food raw materials. Method of determination of anabolic steroids and stylben derivatives by gas chromatography using mass spectrometry

(U.S.) Ford Automotive Standards, How to use solid phase extractor

  • FORD FLTM AO 108-02-2021 DETERMINATION OF ACETIC ACID IN RESINS QUANTITATIVELY USING THERMAL EXTRACTION AND GAS CHROMATOGRAPHY - MASS SPECTROMETRY (GC-MS)

Henan Provincial Standard of the People's Republic of China, How to use solid phase extractor

  • DB41/T 740-2012 Method for Determination of Glyceryl Triacetate Content in Cellulose Acetate Filter Sticks Solid Phase Microextraction-Gas Chromatography-Mass Spectrometry

CEN - European Committee for Standardization, How to use solid phase extractor

  • EN 14524:2004 Foodstuffs - Determination of okadaic acid in mussels - HPLC method with solid phase extraction clean-up@ derivatization and fluorimetric detection

Lithuanian Standards Office , How to use solid phase extractor

  • LST EN ISO 11369:2000 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction (ISO 11369:1997)
  • LST EN ISO 22032:2009 Water quality - Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge - Method using extraction and gas chromatography/mass spectrometry (ISO 22032:2006)
  • LST EN ISO 18857-1:2006 Water quality - Determination of selected alkylphenols - Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection (ISO 18857-1:2005)
  • LST EN ISO 23631:2006 Water quality - Determination of dalapon, trichloroacetic acid and selected haloacetic acids - Method using gas chromatography (GC-ECD and/or GC-MS detection) after liquid-liquid extraction and derivatization (ISO 23631:2006)
  • LST EN ISO 23631:2006/AC:2007 Water quality - Determination of dalapon, trichloroacetic acid and selected haloacetic acids - Method using gas chromatography (GC-ECD and/or GC-MS detection) after liquid-liquid extraction and derivatization (ISO 23631:2006)
  • LST EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011)

Inner Mongolia Provincial Standard of the People's Republic of China, How to use solid phase extractor

  • DB15/T 2687-2022 Determination of volatile components in natural green hay by headspace solid-phase microextraction-gas chromatography mass spectrometry

Indonesia Standards, How to use solid phase extractor

  • SNI 06-6989.37-2005 Water and waste water - Part 37: Test methods of cadmium (Cd) content with atomic absorption spectrophotometers (AAS) by extraction
  • SNI 06-6989.49-2005 Water and waste water - Part 49: Test methods of iron (Fe) content with atomic absorption spectrophotometers (AAS) by extraction
  • SNI 06-6989.47-2005 Water and wastewater - Part 47: Test methods of nickel (Ni) content with atomic absorption spectrophotometers (AAS) by extraction
  • SNI 06-6989.52-2005 Water and waste water - Part 52: Test methods of nitrogen organic content by macro Kjeldahl and titration

Korean Agency for Technology and Standards (KATS), How to use solid phase extractor

  • KS I ISO 18857-1:2021 Water quality — Determination of selected alkylphenols —Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection
  • KS K ISO 13437:2007 Geotextiles and geotextile-related products-Method for installing and extracting samples in soil, and testing specimens in laboratory
  • KS H ISO 22634-1:2019 Cigarettes — Determination of benzo[a]pyrene in cigarette mainsteam smoke using GC/MS — Part 1: Method using methanol as extraction solvent
  • KS I ISO 23631:2018 Water quality — Determination of dalapon, trichloroacetic acid and selected haloacetic acids — Method using gas chromatography(GC-ECD and/or GC-MS detection) after liquid-liquid extraction and derivat
  • KS I ISO 15913:2006 Water quality-Determination of selected phenoxyalkanoic herbicides,including bentazones and hydroxybenzonitriles by gas chromatographyand mass spectrometry after solid phase extraction and derivatization

KR-KS, How to use solid phase extractor

  • KS I ISO 18857-1-2021 Water quality — Determination of selected alkylphenols —Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection
  • KS H ISO 22634-1-2019 Cigarettes — Determination of benzo[a]pyrene in cigarette mainsteam smoke using GC/MS — Part 1: Method using methanol as extraction solvent
  • KS I ISO 23631-2018 Water quality — Determination of dalapon, trichloroacetic acid and selected haloacetic acids — Method using gas chromatography(GC-ECD and/or GC-MS detection) after liquid-liquid extraction and derivat

未注明发布机构, How to use solid phase extractor

  • BS EN ISO 23631:2006(2007) Water quality — Determination of dalapon, trichloroaceticacidand selected haloacetic acids — Method using gas chromatography (GC - ECD and / or GC - MS detection) after liquid - liquid extraction and derivatization
  • BS EN ISO 15913:2003(2008) Water quality — Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization

Standard Association of Australia (SAA), How to use solid phase extractor

Malaysia Standards, How to use solid phase extractor

NO-SN, How to use solid phase extractor

  • NS 8018-1993 Geotechnical testing. Laboratory methods. Determination of one-dimensional consolidation properties by oedometer testing. Method using continuous loading

VN-TCVN, How to use solid phase extractor

  • TCVN 7619-1-2007 Textiles.Methods for the determination of certain aromatic amines derived from azo colorants.Part 1: Detection of the use of certain azo colorants accessible without extraction




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved