ZH
RU
ES

Sample preparation method for infrared spectroscopic analysis

Sample preparation method for infrared spectroscopic analysis, Total:197 items.

In the international standard classification, Sample preparation method for infrared spectroscopic analysis involves: Analytical chemistry, Fuels, Electronic components in general, Lubricants, industrial oils and related products, Metalliferous minerals, Soil quality. Pedology, Materials for aerospace construction, Cereals, pulses and derived products, Products of non-ferrous metals, Medical sciences and health care facilities in general, Milk and milk products, Plastics, Rubber and plastics products, Protection against crime, Non-ferrous metals, Test conditions and procedures in general, Burners. Boilers, Information sciences. Publishing, Metrology and measurement in general, Protection against fire, Raw materials for rubber and plastics, Medical equipment, Products of the chemical industry, Nuclear energy engineering, Air quality, Ferrous metals, Meat, meat products and other animal produce, Testing of metals, General methods of tests and analysis for food products, Geology. Meteorology. Hydrology, Ceramics, Fibre optic communications, Water quality.

国家市场监督管理总局、中国国家标准化管理委员会, Sample preparation method for infrared spectroscopic analysis

GB/T 6040-2019 General rules for infrared analysis
GB/T 41074-2021 Microbeam analysis—Method of specimen preparation for analysis of general powders using WDS and EDS

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Sample preparation method for infrared spectroscopic analysis

GB/T 6040-2002 General rules for infrared analysis
GB/T 12152-1989 Analysis of water used in boiler and cooling system--Determination of mineral oil--Infrared photometric method
GB/T 8570.6-2010 Determination of liquefied anhydrous ammonia.Part 6:Oil content.Gravimetric and infra-red methods
GB/T 8152.11-2023 Methods for chemical analysis of lead concentrates - Part 11: Determination of mercury content by atomic fluorescence spectrometry and direct method of solid injection

Professional Standard - Forestry, Sample preparation method for infrared spectroscopic analysis

LY/T 2053-2012 Standard method for near infrared qualitative analysis of Wood
LY/T2053-2012 Standard method for mear infrarde qualitative analysis of wood

Group Standards of the People's Republic of China, Sample preparation method for infrared spectroscopic analysis

T/CPCIF 0185-2022 Rapid analysis method of automobile diesel fuels— Near infrared spectrometry
T/CPCIF 0184-2022 Rapid analysis method of motor vehicle gasoline— Near infrared spectrometry
T/CPCIF 0186-2022 Rapid analysis method of motor vehicle ethanol gasoline（E10）— Near infrared spectrometry
T/CPCIF 0187-2022 Rapid analysis method of diesel engines NOx reduction agent- aqueous urea solution（AUS 32)—Near infrared spectrometry

Professional Standard - Petroleum, Sample preparation method for infrared spectroscopic analysis

SY/T 5121-1986 Infrared spectroscopic analysis method of rock organic matter and crude oil

NL-NEN, Sample preparation method for infrared spectroscopic analysis

NEN 6302-1980 Test methods for vegetable and animal oils and fats - Preparation of methyl esters for gaschromatography and infrared spectrophotometry

Professional Standard - Electron, Sample preparation method for infrared spectroscopic analysis

SJ/Z 3206.8-1989 Geneeral rules for preparation of standard sample for spectrum analysis

国家能源局, Sample preparation method for infrared spectroscopic analysis

SY/T 5121-2021 Infrared spectroscopic analysis method of organic matter and crude oil in rocks
SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)

CZ-CSN, Sample preparation method for infrared spectroscopic analysis

CSN 42 0600 Cast.2-1975 Antimony of high purity. Methods of chemical and spectral analysis. Preparation of the sample

German Institute for Standardization, Sample preparation method for infrared spectroscopic analysis

DIN 51820-1:1989 Testing of lubricants; analysis of greases by infrared spectrometry; taking and evaluating an infrared spectrum
DIN 51820:2013 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum
DIN EN 6042:2021-08 Aerospace series - Organic compounds - Test method - Analysis by infrared spectroscopy; German and English version prEN 6042:2021 / Note: Date of issue 2021-07-16
DIN 51451:2020 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
DIN EN 15948:2020-12 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels; German version EN 15948:2020
DIN 51639-4:2020-11 Testing of lubricants - Test methods - Part 4: Determination of vegetable oil content in used diesel motor oils using infrared spectrometry

American Society for Testing and Materials (ASTM), Sample preparation method for infrared spectroscopic analysis

ASTM E1252-98(2007) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
ASTM E2224-22 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
ASTM E2224-23 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
ASTM E2224-23a Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
ASTM E2224-02 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
ASTM E2224-23ae1 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
ASTM C1842-16 Standard Test Method for The Analysis of Boron and Silicon in Uranium Hexfluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
ASTM D2124-99e1 Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
ASTM D2124-99(2004) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
ASTM D2124-99(2011) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
ASTM E1915-05 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
ASTM E1915-99 Standard Test Method for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
ASTM E1915-01 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
ASTM E1915-07a Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry
ASTM E29-90 Standard Practice for Using Digits in Test Data to Determine Conformance with Specifications
ASTM E29-93a(1999) Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E2999-17 Standard Test Method for Analysis of Organic Compounds in Smokeless Powder by Gas Chromatography-Mass Spectrometry and Fourier Transform Infrared Spectroscopy
ASTM E1915-07 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry
ASTM F2381-10 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM C1441-04 Standard Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
ASTM C1441-13 Standard Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
ASTM D8438/D8438M-23 Standard Test Methods for Use of Hyperspectral Sensors for Soil Nutrient Analysis of Ground Based Samples
ASTM C1441-99 Standard Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
ASTM D7844-22 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7844-22a Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D6350-98 Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
ASTM D6350-98(2003) Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
ASTM D3162-12(2020) Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
ASTM D6350-14 Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
ASTM F2381-04 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
ASTM C1110-03(2008) Standard Practice for Sample Preparation for X-Ray Emission Spectrometric Analysis of Uranium in Ores Using the Glass Fusion or Pressed Powder Method
ASTM D7844-21 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM E716-10 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spectrochemical Analysis
ASTM F2381-19 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High Molecular Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
ASTM D7624-18 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7844-20 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7844-18 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7797-12 Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy ndash; Rapid Screening Method
ASTM D7844-12 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM E2412-10(2018) Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM E1306-94(2004) Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition
ASTM E1306-94(1998)e1 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition
ASTM E1306-22 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Melting for Spectrochemical Analysis
ASTM D7414-21 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7797-18 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
ASTM D7797-17 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
ASTM D7414-22 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7797-16 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy&x2014;Rapid Screening Method
ASTM E2412-23 Standard Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D8369-21 Standard Test Method for Detailed Hydrocarbon Analysis by High Resolution Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy (GC-VUV)
ASTM D836-84 Standard test method for detailed analysis of hydrocarbons by high-resolution gas chromatography using vacuum ultraviolet absorption spectrometry (GC-VUV)
ASTM D836-77 Standard test method for detailed analysis of hydrocarbons by high-resolution gas chromatography using vacuum ultraviolet absorption spectrometry (GC-VUV)
ASTM D7797-23 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
ASTM D7797-16a Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy&x2014;Rapid Screening Method
ASTM D7963-22 Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid S
ASTM D7624-21 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7624-22 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D7343-07 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM E2412-10 Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM C1110-88(1997)e1 Standard Practice for Sample Preparation for X-Ray Emission Spectrometric Analysis of Uranium in Ores Using the Glass Fusion or Pressed Powder Method
ASTM F2778-09 Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
ASTM D7963-14 Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
ASTM D7963-21 Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid S
ASTM D7414-18 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

Professional Standard - Geology, Sample preparation method for infrared spectroscopic analysis

DZ/T 0279.25-2016 Methods of Analysis of Regional Geochemical Samples Part 25: Combustion for Carbon Determination - Infrared Absorption Spectroscopy
DZ/T 0253.2-2014 Analytic methods for biologic samples in eco-geochemistry assessment.Part 2:Determination of selenium content.Fluorescent spectrophotometry
DZ/T 0253.3-2014 Analytic methods for biologic samples in eco-geochemistry assessment.Part 3: Determination of total mecury content.Cold atomic fluorescent spectrophotometry

British Standards Institution (BSI), Sample preparation method for infrared spectroscopic analysis

DD 220-1994 Soil quality. Determination of mineral oil content. Method by infrared spectrometry and gas chromatographic method
BS EN 15948:2020 Cereals. Determination of moisture and protein. Method using Near-Infrared Spectroscopy in whole kernels
18/30374728 DC BS EN 15948. Cereals. Determination of moisture and protein. Method using Near-Infrared-Spectroscopy in whole kernels
21/30437727 DC BS EN 6042. Aerospace series. Organic compounds. Test method. Analysis by infrared spectroscopy
BS 6043-2.4:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Analysis by X-ray fluorescence spectroscopy
BS 6200-3.28.2:1990 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of sulphur. Steel and cast iron: infra-red absorption method after combustion in an induction furnace
BS 6200-3.1.4:1990 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of aluminium. Non-alloyed steel: flame atomic absorption spectrometric method
BS 6200-3.12.3:1986 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of copper. Steel and cast iron: flame atomic absorption spectrometric method
BS 6200-3.10.2:1989 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of chromium. Steel and cast iron: flame atomic absorption spectrometric method
BS 6200-3.31.3:2002 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of tin. Flame atomic absorption spectrometric method (extraction as Sn-SCN)
BS ISO 19318:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
BS 6783-12:1992 Sampling and analysis of nickel, ferronickel and nickel alloys. Method for the determination of phosphorus in nickel alloys by molybdenum blue molecular absorption spectrometry
BS 6200 Sec.6.1:1990 Sampling and analysis of iron, steel and other ferrous metals. Guidelines on atomic absorption spectrometric techniques. Recommendations for the drafting of standard methods for the chemical analysis of iron and steel by flame atomic absorption spectromet
BS 6200 SubSec.3.7.1:1987 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of calcium. Steel: flame atomic absorption spectrometric method
BS 6200 SubSec.3.16.4:1987 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of lead. Steel: flame atomic absorption spectrometric method
BS 6200-3.10.2:1990 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of chromium. Steel and cast iron: flame atomic absorption spectrometric method
BS 6200-3.11.2:1991 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of cobalt - Steel, irons and steelmaking materials: spectrophotometric method for trace amounts
BS 6721-4:1986 Sampling and analysis of copper and copper alloys - Method for determination of chromium in copper and copper alloys by flame atomic absorption spectrophotometry
BS 6200 SubSec.3.1.5:1985 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of aluminium. Ferrosilicon: atomic absorption spectrometric method
BS 6200 SubSec.3.12.3:1986 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of copper. Steel and cast iron: flame atomic absorption spectrometric method
BS 6200-6.1:1990 Sampling and analysis of iron, steel and other ferrous metals - Guidelines on atomic absorption spectrometric techniques - Recommendations for the drafting of standard methods for the chemical analysis of iron and steel by flame atomic absorption spectrom
BS 6200-6.2:1990 Sampling and analysis of iron, steel and other ferrous metals - Guidelines on atomic absorption spectrometric techniques - Recommendations for the application of flame atomic absorption spectrometry in standard methods for the chemical analysis of iron an

AT-ON, Sample preparation method for infrared spectroscopic analysis

OENORM EN 6042-2021 Aerospace series - Organic compounds - Test method - Analysis by infrared spectroscopy
OENORM EN 15948-2020 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels

European Committee for Standardization (CEN), Sample preparation method for infrared spectroscopic analysis

prEN 6042-2021 Aerospace series - Organic compounds - Test method - Analysis by infrared spectroscopy
EN 15058:2006 Stationary source emissions Determination of the mass concentration of carbon monoxide (CO) Reference method: Non-dispersive infrared spectrometry
EN 10276-2:2003 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Sample preparation method for infrared spectroscopic analysis

PREN 6042-1995 Aerospace Series Organic Compounds Test Method Analysis by Infrared Spectroscopy (Edition P1)

工业和信息化部, Sample preparation method for infrared spectroscopic analysis

YS/T 1332.3-2019 Methods for chemical analysis of crude copper and cobalt raw materials Part 3: Determination of sulfur content High frequency combustion-infrared spectroscopy
YS/T 1057.5-2022 Methods for chemical analysis of cobalt tetroxide Part 5: Determination of carbon content High-frequency combustion-infrared absorption spectrometry

Professional Standard - Non-ferrous Metal, Sample preparation method for infrared spectroscopic analysis

YS/T 820.16-2012 Methods for chemical analysis of laterite nickel ores.Part 16:Determination of carbon and sulfur content.High frequency combustion with infrared absorption spectrometry
YS/T 1047.4-2015 Methods for chemical analysis of copper magnetite.Part 4:Determination of sulfur content.High frequency combustion with infrared absorption method
YS/T 820.18-2012 Methods for chemical analysis of laterite nickel ores.Part 18:Determination of mercury conten.Cold atomic absorption spectrometry
YS/T 820.15-2012 Methods for chemical analysis of laterite nickel ores.Part 15:Determination of cadmium content.Flame atomic absorption spectrometry
YS/T 820.1-2012 Methods for chemical analysis of laterite nickel ores.Part 1：Determination of nikel content.Flame atomic absorption spectrometry
YS/T 820.5-2012 Methods for chemical analysis of laterite nickel ores.Part 5:Determination of cobalt content.Flame atomic absorption spectrometry
YS/T 820.6-2012 Methods for chemical analysis of laterite nickel ores.Part 6:Determination of copper content.Flame atomic absorption spectrometry
YS/T 820.12-2012 Methods for chemical analysis of laterite nickel ores.Part 12:Determination of manganese content.Flame atomic absorption spectrometry
YS/T 820.13-2012 Methods for chemical analysis of laterite nickel ores.Part 13:Determination of lead content.Flame atomic absorption spectrometry
YS/T 820.14-2012 Methods for chemical analysis of laterite nickel ores.Part 14:Determination of zinc content.Flame atomic absorption spectrometry
YS/T 820.17-2012 Methods for chemical analysis of laterite nickel ores.Part 17:Determination of arsenic,antimony and bismuth contents.Hydride generation-atomic fluorescence spectrometry
YS/T 820.7-2012 Methods for chemical analysis of laterite nickel ores.Part 7:Determination of calcium and magnesium content.Flame atomic absorption spectrometry
YS/T 514.6-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 6:Determination of manganese monoxide content.Flame atomic absorption spectrometry
YS/T 820.19-2012 Methods for chemical analysis of laterite nickel ores.Part 19:Determination of aluminum,chromium,iron,magnesium,manganese,nickel and silicon contents.Energy-dispersive X-ray fluorescence spectrometry
YS/T 514.7-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 7:Determination of calcium oxide and magnesium oxide content.Flame atomic absorption spectrometry

IN-BIS, Sample preparation method for infrared spectroscopic analysis

IS 8816-1978

Aerospace, Security and Defence Industries Association of Europe (ASD), Sample preparation method for infrared spectroscopic analysis

ASD-STAN PREN 6042-1995 Aerospace Series Organic Compounds Test Method Analysis by Infrared Spectroscopy (Edition P1)

Standard Association of Australia （SAA）, Sample preparation method for infrared spectroscopic analysis

AS 2300.1.8.2:1991 Methods of chemical and physical testing for the dairying industry - General methods and principles - Assessment of instrumental methods - Infrared spectrometric analysis of milk
AS 2300.1.8:2008
AS/NZS 3580.15:2014

European Association of Aerospace Industries, Sample preparation method for infrared spectroscopic analysis

AECMA PREN 6042-1995 Aerospace Series Organic Compounds Test Method Analysis by Infrared Spectroscopy Edition P1

Professional Standard - Public Safety Standards, Sample preparation method for infrared spectroscopic analysis

GA/T 823.2-2009 Analysis method for paint fragment.Part 2:Infrared absorption spectrometry

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Sample preparation method for infrared spectroscopic analysis

GB/T 10574.12-2017 Methods for chemical analysis of tin-lead solders—Part 12：Determination of sulfur content—High frequency combustion with infrared absorption method
GB/T 35772-2017 Rapid detection of phthalate esters in polyvinyl chloride products—Infra-red spectrometric method

Guangdong Provincial Standard of the People's Republic of China, Sample preparation method for infrared spectroscopic analysis

DB44/T 1855-2016 Material Identification Method of Urea Formaldehyde Resin in Amino Molded Products Infrared Spectroscopy

Association Francaise de Normalisation, Sample preparation method for infrared spectroscopic analysis

NF EN 1767:1999 Produits et systèmes pour la protection et la réparation des structures en béton - Méthodes d'essais - Analyse par spectrométrie infrarouge
NF ISO 19702:2016 Lignes directrices pour l'analyse des gaz et des vapeurs dans les effluents du feu par spectroscopie infrarouge à transformée de Fourier (IRTF)
NF X70-102*NF ISO 19702:2016 Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier transform infrared (FTIR) spectroscopy
NF EN 12938:2000 Méthodes d'analyse de l'étain pour la fabrication d'objets - Détermination de la teneur en alliages et en impuretés par spectrométrie atomique
NF X21-068*NF ISO 29081:2010 Surface chemical analysis - Auger electron spectroscopy - Reporting of methods used for charge control and charge correction
NF A08-300:1989 Steel and Iron - Recommendations for the preparation and the use of standard method of analysis using flame atomic absorption spectrometry
NF EN ISO 21587-3:2007 Analyse chimique des produits réfractaires d'aluminosilicates (méthode alternative à la méthode par fluorescence de rayons X) - Partie 3 : méthodes par spectrométrie d'absorption atomique (AAS) et spectrométrie d'émission atomique avec plasm...

YU-JUS, Sample preparation method for infrared spectroscopic analysis

JUS C.A1.343-1979 Methods for chemical analysis of zine and zine albys. Zine alioy ingots - selection and preparation of samples for spectrographic anatysis
JUS C.A1.342-1979 Methods for chemical analysis of zrne and zine albys. Zine ingots - seleetion and preparation of samplesfor spectrographic analysis

GOSTR, Sample preparation method for infrared spectroscopic analysis

GOST 34567-2019 Meat and meat products. Method for determination of moisture, fat, protein, sodium chloride and ash using near infrared spectroscopy

International Organization for Standardization (ISO), Sample preparation method for infrared spectroscopic analysis

ISO 19702:2015 Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy
ISO/CD 19702 Sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy
ISO/DIS 19702:2023 Sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy
ISO 19318:2004 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
ISO 19318:2021 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
ISO 23506:2021 Workplace air - Analysis of airborne water immiscible mineral oil droplets and vapor with Fourier - Transform infrared spectroscopy

Professional Standard - Energy, Sample preparation method for infrared spectroscopic analysis

NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)

Professional Standard - Coal, Sample preparation method for infrared spectroscopic analysis

MT 116.1-1986 Preparation method of coal rock analysis sample Part 1 Preparation method of coal brick light slice
MT 116.2-1986 Preparation method of coal rock analysis sample Part 2 Preparation method of block coal light slice
MT 116.3-1986 Preparation method of coal rock analysis sample Part 3 Preparation method of coal rock thin section and light thin section

ES-UNE, Sample preparation method for infrared spectroscopic analysis

UNE-EN 15948:2021 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels

RU-GOST R, Sample preparation method for infrared spectroscopic analysis

GOST 9717.1-1982 Copper. Method of spectral analysis of metal standart specimens with photoelectrical registration of spectrum / Note: To be replaced by GOST 31382 (2009).
GOST R 52421-2005 Fish, marine products and products of them. Method of determining the fraction of total mass of protein, fat, water, phosphorus, calcium and ash by the near-infra-red spectrometry
GOST 32255-2013 Milk and milk products. Instrumental express-method for determination of physic-chemical identification parameters by infrared analyzer
GOST 31795-2012 Fish, marine products and products of them. Method of determining the fraction of total mass of protein, fat, water, phosphorus, calcium and ash by the near-infra-red spectrometry

中华全国供销合作总社, Sample preparation method for infrared spectroscopic analysis

GH/T 1259-2019 Near-infrared spectroscopic determination of moisture, tea polyphenols and caffeine content in tea polyphenol products

Lithuanian Standards Office , Sample preparation method for infrared spectroscopic analysis

LST EN 15948-2012 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels
LST EN 15948-2021 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels

Danish Standards Foundation, Sample preparation method for infrared spectroscopic analysis

DS/EN 15948:2012 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels
DS/ISO 29441:2010 Water quality - Determination of total nitrogen after UV digestion - Method using flow analysis (CFA and FIA) and spectrometric detection

CH-SNV, Sample preparation method for infrared spectroscopic analysis

SN EN 15948-2021 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels

IT-UNI, Sample preparation method for infrared spectroscopic analysis

UNI EN 15948-2021 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels

CEN - European Committee for Standardization, Sample preparation method for infrared spectroscopic analysis

PREN 15948-2018 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels

Yunnan Provincial Standard of the People's Republic of China, Sample preparation method for infrared spectroscopic analysis

DB53/T 498-2013 Determination of main chemical constituents of tobacco and tobacco products Near-infrared diffuse reflectance spectrometry

Hainan Provincial Standard of the People's Republic of China, Sample preparation method for infrared spectroscopic analysis

DB46/T 557-2021 Detection of Non-biodegradable Components in Single-Use Plastic Products by Infrared Spectroscopy and Pyrolysis-Gas Chromatography/Mass Spectrometry

Professional Standard - Commodity Inspection, Sample preparation method for infrared spectroscopic analysis

SN/T 2763.2-2012 Chemical analysis of laterite nickel ore.Part 2:Determination of nickel and cobalt content.Flame atomic absorption spectrometry
SN/T 2763.5-2013 Chemical analysis of nickel laterite ore.Part 5:Determination of copper,zinc and chrome content.Flame atomic absorption spectrometry
SN/T 2297.7-2015 Analysis method for gypsum and gysum products.Part 7:Determination of arsenic and mercury content.Atomic fluorescence spectrum
SN/T 2763.7-2014 Chemical analysis of nickel laterite ore.Part 7:determination of iron, nickel, silicon, aluminum, magnesium,calcium, titanium, manganese,copper and phosphorus content.Wavelength dispersive X-ray fluorescence spectrometry

Professional Standard - Medicine, Sample preparation method for infrared spectroscopic analysis

YY/T 0814-2010 tandard test method for evaluating trans-vinylene yield in irradiated ultra-high-molecular-weight polyethylene fabricated forms intended for surgical implants by infrared spectroscopy

Anhui Provincial Standard of the People's Republic of China, Sample preparation method for infrared spectroscopic analysis

DB34/T 2127.2-2014 Methods of Analysis of Samples for Regional Geochemical Surveys Part 2: Determination of Multielement Content by X-ray Fluorescence Spectrometry
DB34/T 2127.7-2014 Analytical methods of regional geochemical survey samples Part 7: Determination of arsenic, antimony, bismuth and mercury by atomic fluorescence spectrometry
DB34/T 2127.11-2014 Analytical methods of regional geochemical survey samples - Part 11: Determination of silver, boron, tin and lead content by emission spectrometry
DB34/T 2127.12-2014 Methods of Analysis of Samples for Regional Geochemical Surveys - Part 12: Chemical Treatment - Determination of Gold Content by Emission Spectrometry

Japanese Industrial Standards Committee (JISC), Sample preparation method for infrared spectroscopic analysis

JIS R 1693-1:2012 Measurement method for emissivity of fine ceramics and ceramic matrix composites -- Part 1: Normal spectral emissivity by black body reference method using FTIR
JIS R 1693-2:2012 Measurement method for emissivity of fine ceramics and ceramic matrix composites -- Part 2: Normal emissivity by reflective method using FTIR

Korean Agency for Technology and Standards (KATS), Sample preparation method for infrared spectroscopic analysis

KS D ISO 19318:2005 Surface chemical analysis－X-ray photoelectron spectroscopy－Reporting of methods used for charge control and charge correction

American National Standards Institute （ANSI), Sample preparation method for infrared spectroscopic analysis

ANSI/TIA/EIA 455-168A-1992 Chromatic Dispersion Measurement of Multimode Graded-Index and Single-Mode Optical Fibers by Spectral Group Delay Measurement - Variable Aperture Method in the Farfield

NZ-SNZ, Sample preparation method for infrared spectroscopic analysis

AS/NZS 3580.17:2016 Methods for sampling and analysis of ambient air Method 17: Determination of gaseous compounds in ambient air-Direct-reading cavity ring-down spectroscopy instrumental method